A comparative study of gelatin sponge scaffolds and PLGA scaffolds transplanted to completely transected spinal cord of rat

Improved Recovery of Complete Spinal Cord Transection by a Plasma-Modified Fibrillar Scaffold

Complete spinal cord injury causes an irreversible disruption in the central nervous system, leading to motor, sensory, and autonomic function loss, and a secondary injury that constitutes a physical barrier preventing tissue repair. Tissue engineering scaffolds are presented as a permissive platform for cell migration and the reconnection of spared tissue. Iodine-doped plasma pyrrole polymer (pPPy-I), a neuroprotective material, was applied to polylactic acid (PLA) fibers and implanted in a rat complete spinal cord transection injury model to evaluate whether the resulting composite implants provided structural and functional recovery, using magnetic resonance (MR) imaging, diffusion tensor imaging and tractography, magnetic resonance spectroscopy, locomotion analysis, histology, and immunofluorescence. In vivo, MR studies evidenced a tissue response to the implant, demonstrating that the fibrillar composite scaffold moderated the structural effects of secondary damage by providing mechanical stability to the lesion core, tissue reconstruction, and significant motor recovery. Histologic analyses demonstrated that the composite scaffold provided a permissive environment for cell attachment and neural tissue guidance over the fibers, reducing cyst formation. These results supply evidence that pPPy-I enhanced the properties of PLA fibrillar scaffolds as a promising treatment for spinal cord injury recovery.

A biocompatible gelatin sponge scaffold confers robust tissue remodeling after spinal cord injury in a non-human primate model

We previously constructed a three-dimensional gelatin sponge (3D-GS) scaffold as a delivery vehicle for therapeutic cells and trophic factors in the treatment of spinal cord injury (SCI), and this study aimed to assess the biosafety and efficacy of the scaffold in a non-human primate SCI model. However, because it has only been tested in rodent and canine models, the biosafety and efficacy of the scaffold should ideally be assessed in a non-human primate SCI model before its use in the clinic. No adverse reactions were observed over 8 weeks following 3D-GS scaffold implantation into in a Macaca fascicularis with hemisected SCI. Scaffold implantation also did not add to neuroinflammatory or astroglial responses already present at the injured site, suggesting good biocompatibility. Notably, there was a significant reduction in α-smooth muscle actin (αSMA)-positive cells at the injury/implantation interface, leading to alleviation of fibrotic compression of the residual spinal cord tissue. The regenerating tissue in the scaffold showed numerous cells migrating into the implant secreting abundant extracellular matrix, resulting in a pro-regenerative microenvironment. Consequently, nerve fiber regeneration, myelination, vascularization, neurogenesis, and electrophysiological improvements were achieved. These results indicated that the 3D-GS scaffold had good histocompatibility and effectiveness in the structural repair of injured spinal cord tissue in a non-human primate and is suitable for use in the treatment of patients with SCI.

Additive Manufactured Polymers in Dentistry, Current State-of-the-Art and Future Perspectives-A Review

3D-printing application in dentistry not only enables the manufacture of patient-specific devices and tissue constructs, but also allows mass customization, as well as digital workflow, with predictable lower cost and rapid turnaround times. 4D printing also shows a good impact in dentistry, as it can produce dynamic and adaptable materials, which have proven effective in the oral environment, under its continuously changing thermal and humidity conditions. It is expected to further boost the research into producing a whole tooth, capable to harmoniously integrate with the surrounding periodontium, which represents the ultimate goal of tissue engineering in dentistry. Because of their high versatility associated with the wide variety of available materials, additive manufacturing in dentistry predominantly targets the production of polymeric constructs. The aim of this narrative review is to catch a glimpse of the current state-of-the-art of additive manufacturing in dentistry, and the future perspectives of this modern technology, focusing on the specific polymeric materials.

Bioactive 2D nanomaterials for neural repair and regeneration

Biomaterials have provided promising strategies towards improving the functions of injured tissues of the nervous system. Recently, 2D nanomaterials, such as graphene, layered double hydroxides (LDHs), and black phosphorous, which are characterized by ultrathin film structures, have attracted much attention in the fields of neural repair and regeneration. 2D nanomaterials have extraordinary physicochemical properties and excellent biological activities, such as a large surface-area-to-thickness ratio, high levels of adhesion, and adjustable flexibility. In addition, they can be designed to have superior biocompatibility and electrical or nano-carrier properties. To date, many 2D nanomaterials have been used for synaptic modulation, neuroinflammatory reduction, stem cell fate regulation, and injured neural cell/tissue repair. In this review, we discuss the advances in 2D nanomaterial technology towards novel neurological applications and the mechanisms underlying their unique features. In addition, the future outlook of functional 2D nanomaterials towards addressing the difficult issues of neuropathy has been explored to introduce a promising strategy towards repairing and regenerating the injured nervous system.

Developing a mechanically matched decellularized spinal cord scaffold for the in situ matrix-based neural repair of spinal cord injury

Tissue engineering is a promising strategy to repair spinal cord injury (SCI). However, a bioscaffold with mechanical properties that match those of the pathological spinal cord tissue and a pro-regenerative matrix that allows robust neurogenesis for overcoming post-SCI scar formation has yet to be developed. Here, we report that a mechanically enhanced decellularized spinal cord (DSC) scaffold with a thin poly (lactic-co-glycolic acid) (PLGA) outer shell may fulfill the requirements for effective in situ neuroengineering after SCI. Using chemical extraction and electrospinning methods, we successfully constructed PLGA thin shell-ensheathed DSC scaffolds (PLGA-DSC scaffolds) in a way that removed major inhibitory components while preserving the permissive matrix. The DSCs exhibited good cytocompatibility with neural stem cells (NSCs) and significantly enhanced their differentiation toward neurons in vitro. Due to the mechanical reinforcement, the implanted PLGA-DSC scaffolds showed markedly increased resilience to infiltration by myofibroblasts and the deposition of dense collagen matrix, thereby creating a neurogenic niche favorable for the targeted migration, residence and neuronal differentiation of endogenous NSCs after SCI. Furthermore, PLGA-DSC presented a mild immunogenic property but prominent ability to polarize macrophages from the M1 phenotype to the M2 phenotype, leading to significant tissue regeneration and functional restoration after SCI. Taken together, the results demonstrate that the mechanically matched PLGA-DSC scaffolds show promise for effective tissue repair after SCI.

The design criteria and therapeutic strategy of functional scaffolds for spinal cord injury repair

Spinal cord injury (SCI) remains a therapeutic challenge in clinic. Current drug and cell therapeutics have obtained significant efficacy but are still in the early stages for complete neural and functional recovery. In the past few decades, functional scaffolds (FSs) have been rapidly developed to bridge the lesion and provide a framework for tissue regeneration in SCI repair. Moreover, a FS can act as an adjuvant for locally delivering drugs in the lesion with a designed drug release profile, and supplying a biomimetic environment for implanted cells. In this review, the design criteria of FSs for SCI treatment are summarized according to their biocompatibility, mechanical properties, morphology, architecture, and biodegradability. Subsequently, FSs designed for SCI repair in the scope of drug delivery, cell implantation and combination therapy are introduced, respectively. And how a FS promotes their therapeutic efficacy is analyzed. Finally, the challenges, perspectives, and potential of FSs for SCI treatment are discussed. Hopefully, this review may inspire the future development of potent FSs to facilitate SCI repair in clinic.

Biomaterials reinforced MSCs transplantation for spinal cord injury repair

Due to the complex pathophysiological mechanism, spinal cord injury (SCI) has become one of the most intractable central nervous system (CNS) diseases to therapy. Stem cell transplantation, mesenchymal stem cells (MSCs) particularly, appeals to more and more attention along with the encouraging therapeutic results for the functional regeneration of SCI. However, traditional cell transplantation strategies have some limitations, including the unsatisfying survival rate of MSCs and their random diffusion from the injection site to ambient tissues. The application of biomaterials in tissue engineering provides a new horizon. Biomaterials can not only confine MSCs in the injured lesions with higher cell viability, but also promote their therapeutic efficacy. This review summarizes the strategies and advantages of biomaterials reinforced MSCs transplantation to treat SCI in recent years, which are clarified in the light of various therapeutic effects in pathophysiological aspects of SCI.

Development of an N-Cadherin Biofunctionalized Hydrogel to Support the Formation of Synaptically Connected Neural Networks

In vitro models of the human central nervous system (CNS), particularly those derived from induced pluripotent stem cells (iPSCs), are becoming increasingly recognized as useful complements to animal models for studying neurological diseases and developing therapeutic strategies. However, many current three-dimensional (3D) CNS models suffer from deficits that limit their research utility. In this work, we focused on improving the interactions between the extracellular matrix (ECM) and iPSC-derived neurons to support model development. The most common ECMs used to fabricate 3D CNS models often lack the necessary bioinstructive cues to drive iPSC-derived neurons to a mature and synaptically connected state. These ECMs are also typically difficult to pattern into complex structures due to their mechanical properties. To address these issues, we functionalized gelatin methacrylate (GelMA) with an N-cadherin (Cad) extracellular peptide epitope to create a biomaterial termed GelMA-Cad. After photopolymerization, GelMA-Cad forms soft hydrogels (on the order of 2 kPa) that can maintain patterned architectures. The N-cadherin functionality promotes survival and maturation of single-cell suspensions of iPSC-derived glutamatergic neurons into synaptically connected networks as determined by viral tracing and electrophysiology. Immunostaining reveals a pronounced increase in presynaptic and postsynaptic marker expression in GelMA-Cad relative to Matrigel, as well as extensive colocalization of these markers, thus highlighting the biological activity of the N-cadherin peptide. Overall, given its ability to enhance iPSC-derived neuron maturity and connectivity, GelMA-Cad should be broadly useful for in vitro studies of neural circuitry in health and disease.

Bioprintability: Physiomechanical and Biological Requirements of Materials for 3D Bioprinting Processes

Three-dimensional (3D) bioprinting is an additive manufacturing process that utilizes various biomaterials that either contain or interact with living cells and biological systems with the goal of fabricating functional tissue or organ mimics, which will be referred to as bioinks. These bioinks are typically hydrogel-based hybrid systems with many specific features and requirements. The characterizing and fine tuning of bioink properties before, during, and after printing are therefore essential in developing reproducible and stable bioprinted constructs. To date, myriad computational methods, mechanical testing, and rheological evaluations have been used to predict, measure, and optimize bioinks properties and their printability, but none are properly standardized. There is a lack of robust universal guidelines in the field for the evaluation and quantification of bioprintability. In this review, we introduced the concept of bioprintability and discussed the significant roles of various physiomechanical and biological processes in bioprinting fidelity. Furthermore, different quantitative and qualitative methodologies used to assess bioprintability will be reviewed, with a focus on the processes related to pre, during, and post printing. Establishing fully characterized, functional bioink solutions would be a big step towards the effective clinical applications of bioprinted products.

Recent advances in biomaterials for 3D scaffolds: A review

Considering the advantages and disadvantages of biomaterials used for the production of 3D scaffolds for tissue engineering, new strategies for designing advanced functional biomimetic structures have been reviewed. We offer a comprehensive summary of recent trends in development of single- (metal, ceramics and polymers), composite-type and cell-laden scaffolds that in addition to mechanical support, promote simultaneous tissue growth, and deliver different molecules (growth factors, cytokines, bioactive ions, genes, drugs, antibiotics, etc.) or cells with therapeutic or facilitating regeneration effect. The paper briefly focuses on divers 3D bioprinting constructs and the challenges they face. Based on their application in hard and soft tissue engineering, in vitro and in vivo effects triggered by the structural and biological functionalized biomaterials are underlined. The authors discuss the future outlook for the development of bioactive scaffolds that could pave the way for their successful imposing in clinical therapy.

Organotypic Neurovascular Models: Past Results and Future Directions

The high failure rates of clinical trials in neurodegeneration, perhaps most apparent in recent high-profile failures of potential Alzheimer's disease therapies, have partially motivated the development of improved human cell-based models to bridge the gap between well-plate assays and preclinical efficacy studies in mice. Recently, cerebral organoids derived from stem cells have gained significant traction as 3D models of central nervous system (CNS) regions. Although this technology is promising, several limitations still exist; most notably, improper structural organization of neural cells and a lack of functional glia and vasculature. Here, we provide an overview of the cerebral organoid field and speculate how engineering strategies, including biomaterial fabrication and templating, might be used to overcome existing challenges.

Investigation of glycosaminoglycan mimetic scaffolds for neurite growth

Spinal cord injury can lead to severe dysfunction as a result of limited nerve regeneration that is due to an inhibitory environment created at the site of injury. Neural tissue engineering using materials that closely mimic the extracellular matrix (ECM) during neural development could enhance neural regeneration. Glycosaminoglycans (GAGs), which are sulfated polysaccharides, have been shown to modulate axonal outgrowth in neural tissue depending upon the position and degree of sulfation. Cellulose sulfate (CelS), which is a GAG mimetic, was evaluated for its use in promoting neurite extension. Aligned fibrous scaffolds containing gelatin blended with 0.25% partially sulfated cellulose sulfate (pCelS), having sulfate predominantly at the 6-carbon position of the glucose monomer unit, and fully sulfated cellulose sulfate (fCelS), which is sulfated at the 2-, 3-, and 6-carbon positions of the glucose monomer unit, were fabricated using the electrospinning method. Comparisons were made with scaffolds containing native GAGs, chondroitin sulfate-A (CS-A) and chondroitin sulfate-C (CS-C), which were obtained from commercial sources. CS-A and CS-C are present in neural tissue ECM. The degree of sulfation and position of sulfate groups was determined using elemental analysis, Fourier-transform infrared spectroscopy (FTIR), Raman microspectroscopy, and ¹³C nuclear magnetic resonance (NMR). In vitro studies examined both nerve growth factor (NGF) binding on scaffolds and neurite extension by dorsal root ganglion (DRG) neurons. NGF binding was highest on scaffolds containing pCelS and fCelS. Neurite extension was greatest for scaffolds containing fCelS followed by pCelS, with the lowest outgrowth on the CS-A containing scaffolds, suggesting that the degree and position of sulfation of CelS was permissible for neurite outgrowth. This study demonstrated that cellulose sulfate, as a GAG mimetic, could be used for future neural tissue regeneration application. STATEMENT OF SIGNFICANCE: Scaffolds that closely mimic the native extracellular matrix (ECM) during development may be a promising approach to enhance neural regeneration. Here, we reported a glycosaminoglycan (GAG) mimetic derived from cellulose that promotes neurite extension over native GAGs, chondroitin sulfate-A (CS-A) and chondroitin sulfate-C (CS-C), which are present in neural ECM. Depending upon the degree and position of sulfation, the GAG mimetic can impact nerve growth factor binding and permissive neurite outgrowth.

Sustained Release SDF-1α/TGF-β1-Loaded Silk Fibroin-Porous Gelatin Scaffold Promotes Cartilage Repair

Continuous delivery of growth factors to the injury site is crucial to creating a favorable microenvironment for cartilage injury repair. In the present study, we fabricated a novel sustained-release scaffold, stromal-derived factor-1α (SDF-1α)/transforming growth factor-β1 (TGF-β1)-loaded silk fibroin-porous gelatin scaffold (GSTS). GSTS persistently releases SDF-1α and TGF-β1, which enhance cartilage repair by facilitating cell homing and chondrogenic differentiation. Scanning electron microscopy showed that GSTS is a porous microstructure and the protein release assay demonstrated the sustainable release of SDF-1α and TGF-β1 from GSTS. Bone marrow-derived mesenchymal stem cells (MSCs) maintain high in vitro cell activity and excellent cell distribution and phenotype after seeding into GSTS. Furthermore, MSCs acquired enhanced chondrogenic differentiation capability in the TGF-β1-loaded scaffolds (GSTS or GST: loading TGF-β1 only) and the conditioned medium from SDF-1α-loaded scaffolds (GSTS or GSS: loading SDF-1α only) effectively promoted MSCs migration. GSTS was transplanted into the osteochondral defects in the knee joint of rats, and it could promote cartilage regeneration and repair the cartilage defects at 12 weeks after transplantation. Our study shows that GSTS can facilitate in vitro MSCs homing, migration, chondrogenic differentiation and SDF-1α and TGF-β1 have a synergistic effect on the promotion of in vivo cartilage forming. This SDF-1α and TGF-β1 releasing GSTS have promising therapeutic potential in cartilage repair.

Polymer scaffolds facilitate spinal cord injury repair

During the past decades, improving patient neurological recovery following spinal cord injury (SCI) has remained a challenge. An effective treatment for SCI would not only reduce fractured elements and isolate developing local glial scars to promote axonal regeneration but also ameliorate secondary effects, including inflammation, apoptosis, and necrosis. Three-dimensional (3D) scaffolds provide a platform in which these mechanisms can be addressed in a controlled manner. Polymer scaffolds with favorable biocompatibility and appropriate mechanical properties have been engineered to minimize cicatrization, customize drug release, and ensure an unobstructed space to promote cell growth and differentiation. These properties make polymer scaffolds an important potential therapeutic platform. This review highlights the recent developments in polymer scaffolds for SCI engineering. STATEMENT OF SIGNIFICANCE: How to improve the efficacy of neurological recovery after spinal cord injury (SCI) is always a challenge. Tissue engineering provides a promising strategy for SCI repair, and scaffolds are one of the most important elements in addition to cells and inducing factors. The review highlights recent development and future prospects in polymer scaffolds for SCI therapy. The review will guide future studies by outlining the requirements and characteristics of polymer scaffold technologies employed against SCI. Additionally, the peculiar properties of polymer materials used in the therapeutic process of SCI also have guiding significance to other tissue engineering approaches.

Electroacupuncture Facilitates the Integration of Neural Stem Cell-Derived Neural Network with Transected Rat Spinal Cord

The hostile environment of an injured spinal cord makes it challenging to achieve higher viability in a grafted tissue-engineered neural network used to reconstruct the spinal cord circuit. Here, we investigate whether cell survival and synaptic transmission within an NT-3 and TRKC gene-overexpressing neural stem cell-derived neural network scaffold (NN) transplanted into transected spinal cord could be promoted by electroacupuncture (EA) through improving the microenvironment. Our results showed that EA facilitated the cell survival, neuronal differentiation, and synapse formation of a transplanted NN. Pseudorabies virus tracing demonstrated that EA strengthened synaptic integration of the transplanted NN with the host neural circuit. The combination therapy also promoted axonal regeneration, spinal conductivity, and functional recovery. The findings highlight EA as a potential and safe supplementary therapeutic strategy to reinforce the survival and synaptogenesis of a transplanted NN as a neuronal relay to bridge the two severed ends of an injured spinal cord.

•

EA promotes the survival and synapse formation of NSC-derived neurons in grafted NN

•

EA strengthens synaptic integration of grafted NN with the spinal cord neural circuit

•

EA enhances NT-3 level and activates NT-3/TRKC/AKT pathway in the injury/graft site

•

The combination therapy increases axonal regeneration and spinal functional recovery

Enhancement of neural stem cell survival, proliferation and differentiation by IGF-1 delivery in graphene oxide-incorporated PLGA electrospun nanofibrous mats

The mammalian central nervous system has a limited ability for self-repair under injury conditions.

Local delivery of FTY720 and NSCs on electrospun PLGA scaffolds improves functional recovery after spinal cord injury

Spinal cord injury (SCI) is a common issue in the clinic that causes severe motor and sensory dysfunction below the lesion level. FTY720, also known as fingolimod, has recently been reported to exert a positive effect on the recovery from a spinal cord injury. Through local delivery to the lesion site, FTY720 effectively integrates with biomaterials, and the systemic adverse effects are alleviated. However, the effects of the proper mass ratio of FTY720 in biomaterials on neural stem cell (NSC) proliferation and differentiation, as well as functional recovery after SCI, have not been thoroughly investigated. In our study, we fabricated electrospun poly (lactide-co-glycolide) (PLGA)/FTY720 scaffolds at different mass ratios (0.1%, 1%, and 10%) and characterized these scaffolds. The effects of electrospun PLGA/FTY720 scaffolds on NSC proliferation and differentiation were measured. Then, a rat model of spinal transection was established to investigate the effects of PLGA/FTY720 scaffolds loaded with NSCs. Notably, 1% PLGA/FTY720 scaffolds exerted the best effects on the proliferation and differentiation of NSCs and 10% PLGA/FTY720 was cytotoxic to NSCs. Based on the Basso, Beattie, and Bresnahan (BBB) score, HE staining and immunofluorescence staining, the PLGA/FTY720 scaffold loaded with NSCs effectively promoted the recovery of spinal cord function. Thus, FTY720 properly integrated with electrospun PLGA scaffolds, and electrospun PLGA/FTY720 scaffolds loaded with NSCs may have potential applications for SCI as a nerve implant.

Spinal cord injury (SCI) is a common issue in the clinic that causes severe motor and sensory dysfunction below the lesion level.

An in vivo comparative study of the gelatin microtissue-based bottom-up strategy and top-down strategy in bone tissue engineering application

Tissue-engineered bone grafts (TEBGs) represent a promising treatment for bone defects. Nevertheless, drawbacks of the current construction strategy (top-down [TD] strategy) such as limited transmission of nutrients and nonuniform distribution of seeded cells, result in an unsatisfied therapeutic effect on large segmental bone defects. Theoretically, tissue-engineered microtissue (TEMT)-based bottom-up (BU) strategy is effective in preserving seed cells and vascularization, thus being regarded as a better alternative for TEBGs. Yet, there are few studies focusing on the comparison of the in vivo performance of TEBGs fabricated by TD or BU strategy. Here, we developed an ectopic bone formation rat model to compare the performance of these two construction strategies in vivo. TEBGs made from gelatin TEMT (BU strategy) and bulk tissue (BT; TD strategy) were seeded with equal number of rat bone marrow-derived mesenchymal stem cells and fabricated in 5 mm polydimethylsiloxane chambers. The grafts were implanted into subcutaneous pockets in the same rat. Four weeks after implantation, microcomputed tomography and hematoxylin and eosin staining results demonstrated that more bony tissue was formed in the microtissue (MT) group than in the BT group. CD31 staining further confirmed that there were more blood vessels in the MT group, indicating that the BU strategy was superior in inducing angiogenesis. This comparative study provides evidence that the BU construction strategy is more effective for in vivo application and bone defect treatment by bone tissue engineering. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 678-688, 2019.

Fabrication of alignment polycaprolactone scaffolds by combining use of electrospinning and micromolding for regulating Schwann cells behavior

In the present study, a new approach for fabricating micropatterned polycaprolactone (PCL) scaffolds with ridge/groove structure on the surface was developed by combining use of electrospinning and micromolding method. A series of physicochemical properties, including morphology, wettability, component, crystal pattern and mechanical properties, of prepared PCL scaffolds were characterization, respectively. Stability of the micropatterned PCL scaffolds was measured using phosphate buffer solution immersion for a certain period. Then, the regulating effects of the micropatterned PCL scaffolds on attachment, orientation and normal biological function of Schwann cells were evaluated. And the protein adsorption behavior in various PCL scaffolds was also detected. The results showed that the micropatterned PCL scaffolds demonstrated a porous micro/nano complex structure with enhanced hydrophobicity and mechanical properties as a function of electrospun flow-rate of PCL solution. The micropatterned PCL scaffolds possessed good stability and could effectively regulate the attachment and orientation of Schwann cells at the early stage after cell culture. Importantly, the electrospun flow-rate of PCL solution was found to play an important role in scaffold properties, cell behavior and protein adsorption. The micropatterned scaffolds with a flow-rate of PCL solution at 0.12 mL h^-1 demonstrated the better regulation on Schwann cells attachment and alignment without negatively affect the normal biological function of the cells. To the best of our knowledge, this is the first report of combining use of electrospinning and micromolding method for preparing artificial nerve implants. The study is anticipated to have potential application in peripheral nerve and other tissue engineering. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 3123-3134, 2018.

Recovery of paralyzed limb motor function in canine with complete spinal cord injury following implantation of MSC-derived neural network tissue

We have reported previously that bone marrow mesenchymal stem cell (MSC)-derived neural network scaffold not only survived in the injury/graft site of spinal cord but also served as a "neuronal relay" that was capable of improving the limb motor function in a complete spinal cord injury (SCI) rat model. It remained to be explored whether such a strategy was effective for repairing the large spinal cord tissue loss as well as restoring motor function in larger animals. We have therefore extended in this study to construct a canine MSC-derived neural network tissue in vitro with the aim to evaluate its efficacy in treating adult beagle dog subjected to a complete transection of the spinal cord. The results showed that after co-culturing with neurotropin-3 overexpressing Schwann cells in a gelatin sponge scaffold for 14 days, TrkC overexpressing MSCs differentiated into neuron-like cells. In the latter, some cells appeared to make contacts with each other through synapse-like structures with trans-synaptic electrical activities. Remarkably, the SCI canines receiving the transplantation of the MSC-derived neural network tissue demonstrated a gradual restoration of paralyzed limb motor function, along with improved electrophysiological presentation when compared with the control group. Magnetic resonance imaging and diffusion tensor imaging showed that the canines receiving the MSC-derived neural network tissue exhibited robust nerve tract regeneration in the injury/graft site. Histological analysis showed that some of the MSC-derived neuron-like cells had survived in the injury/graft site up to 6.5 months. Implantation of MSC-derived neural network tissue significantly improved the microenvironment of the injury/graft site. It is noteworthy that a variable number of them had integrated with the regenerating corticospinal tract nerve fibers and 5-HT nerve fibers through formation of synapse-like contacts. The results suggest that the transplanted MSC-derived neural network tissue may serve as a structural and functional "neuronal relay" to restore the paralyzed limb motor function in the canine with complete SCI.

Effect of hyaluronic acid hydrogels containing astrocyte-derived extracellular matrix and/or V2a interneurons on histologic outcomes following spinal cord injury

One reason for the lack of regeneration, and poor clinical outcomes, following central nervous system (CNS) injury is the formation of a glial scar that inhibits new axon growth. In addition to forming the glial scar, astrocytes have been shown to be important for spontaneous SCI recovery in rodents, suggesting some astrocyte populations are pro-regenerative, while others are inhibitory following injury. In this work, the effect of implanting hyaluronic acid (HA) hydrogels containing extracellular matrix (ECM) harvested from mouse embryonic stem cell (mESC)-derived astrocytes on histologic outcomes following SCI in rats was explored. In addition, the ability of HA hydrogels with and without ECM to support the transplantation of mESC-derived V2a interneurons was tested. The incorporation of ECM harvested from protoplasmic (grey matter) astrocytes, but not ECM harvested from fibrous (white matter) astrocytes, into hydrogels was found to reduce the size of the glial scar, increase axon penetration into the lesion, and reduce macrophage/microglia staining two weeks after implantation. HA hydrogels were also found to support transplantation of V2a interneurons and the presence of these cells caused an increase in neuronal processes both within the lesion and in the 500 μm surrounding the lesion. Overall, protoplasmic mESC-derived astrocyte ECM showed potential to treat CNS injury. In addition, ECM:HA hydrogels represent a novel scaffold with beneficial effects on histologic outcomes after SCI both with and without cells.

Biomaterial Scaffolds in Regenerative Therapy of the Central Nervous System

The central nervous system (CNS) is the most important section of the nervous system as it regulates the function of various organs. Injury to the CNS causes impairment of neurological functions in corresponding sites and further leads to long-term patient disability. CNS regeneration is difficult because of its poor response to treatment and, to date, no effective therapies have been found to rectify CNS injuries. Biomaterial scaffolds have been applied with promising results in regeneration medicine. They also show great potential in CNS regeneration for tissue repair and functional recovery. Biomaterial scaffolds are applied in CNS regeneration predominantly as hydrogels and biodegradable scaffolds. They can act as cellular supportive scaffolds to facilitate cell infiltration and proliferation. They can also be combined with cell therapy to repair CNS injury. This review discusses the categories and progression of the biomaterial scaffolds that are applied in CNS regeneration.

3D scaffolds for brain tissue regeneration: architectural challenges

Critical analysis of experimental studies on 3D scaffolds for brain tissue engineering.

Cell Transplantation and Neuroengineering Approach for Spinal Cord Injury Treatment: A Summary of Current Laboratory Findings and Review of Literature

Spinal cord injury (SCI) can cause severe traumatic injury to the central nervous system (CNS). Current therapeutic effects achieved for SCI in clinical medicine show that there is still a long way to go to reach the desired goal of full or significant functional recovery. In basic medical research, however, cell transplantation, gene therapy, application of cytokines, and biomaterial scaffolds have been widely used and investigated as treatments for SCI. All of these strategies when used separately would help rebuild, to some extent, the neural circuits in the lesion area of the spinal cord. In light of this, it is generally accepted that a combined treatment may be a more effective strategy. This review focuses primarily on our recent series of work on transplantation of Schwann cells and adult stem cells, and transplantation of stem cell-derived neural network scaffolds with functional synapses. Arising from this, an artificial neural network (an exogenous neuronal relay) has been designed and fabricated by us—a biomaterial scaffold implanted with Schwann cells modified by the neurotrophin-3 (NT-3) gene and adult stem cells modified with the TrkC (receptor of NT-3) gene. More importantly, experimental evidence suggests that the novel artificial network can integrate with the host tissue and serve as an exogenous neuronal relay for signal transfer and functional improvement of SCI.

Hyaluronic acid scaffold has a neuroprotective effect in hemisection spinal cord injury

OBJECTIVE

Spinal cord injury occurs in 2 phases. The initial trauma is followed by inflammation that leads to fibrous scar tissue, glial scarring, and cavity formation. Scarring causes further axon death around and above the injury. A reduction in secondary injury could lead to functional improvement. In this study, hyaluronic acid (HA) hydrogels were implanted into the gap formed in the hemisected spinal cord of Sprague-Dawley rats in an attempt to attenuate damage and regenerate tissue.

METHODS

A T-10 hemisection spinal cord injury was created in adult male Sprague-Dawley rats; the rats were assigned to a sham, control (phosphate-buffered saline), or HA hydrogel–treated group. One cohort of 23 animals was followed for 12 weeks and underwent weekly behavioral assessments. At 12 weeks, retrograde tracing was performed by injecting Fluoro-Gold in the left L-2 gray matter. At 14 weeks, the animals were killed. The volume of the lesion and the number of cells labeled from retrograde tracing were calculated. Animals in a separate cohort were killed at 8 or 16 weeks and perfused for immunohistochemical analysis and transmission electron microscopy. Samples were stained using H & E, neurofilament stain (neurons and axons), silver stain (disrupted axons), glial fibrillary acidic protein stain (astrocytes), and Iba1 stain (mononuclear cells).

RESULTS

The lesions were significantly smaller in size and there were more retrograde-labeled cells in the red nuclei of the HA hydrogel–treated rats than in those of the controls; however, the behavioral assessments revealed no differences between the groups. The immunohistochemical analyses revealed decreased fibrous scarring and increased retention of organized intact axonal tissue in the HA hydrogel–treated group. There was a decreased presence of inflammatory cells in the HA hydrogel–treated group. No axonal or neuronal regeneration was observed.

CONCLUSIONS

The results of these experiments show that HA hydrogel had a neuroprotective effect on the spinal cord by decreasing the magnitude of secondary injury after a lacerating spinal cord injury. Although regeneration and behavioral improvement were not observed, the reduction in disorganized scar tissue and the retention of neurons near and above the lesion are important for future regenerative efforts. In addition, this gel would be useful as the base substrate in the development of a more complex scaffold.

Cell-seeded alginate hydrogel scaffolds promote directed linear axonal regeneration in the injured rat spinal cord

Despite recent progress in enhancing axonal growth in the injured spinal cord, the guidance of regenerating axons across an extended lesion site remains a major challenge. To determine whether regenerating axons can be guided in rostrocaudal direction, we implanted 2mm long alginate-based anisotropic capillary hydrogels seeded with bone marrow stromal cells (BMSCs) expressing brain-derived neurotrophic factor (BDNF) or green fluorescent protein (GFP) as control into a C5 hemisection lesion of the rat spinal cord. Four weeks post-lesion, numerous BMSCs survived inside the scaffold channels, accompanied by macrophages, Schwann cells and blood vessels. Quantification of axons growing into channels demonstrated 3-4 times more axons in hydrogels seeded with BMSCs expressing BDNF (BMSC-BDNF) compared to control cells. The number of anterogradely traced axons extending through the entire length of the scaffold was also significantly higher in scaffolds with BMSC-BDNF. Increasing the channel diameters from 41μm to 64μm did not lead to significant differences in the number of regenerating axons. Lesions filled with BMSC-BDNF without hydrogels exhibited a random axon orientation, whereas axons were oriented parallel to the hydrogel channel walls. Thus, alginate-based scaffolds with an anisotropic capillary structure are able to physically guide regenerating axons.

STATEMENT OF SIGNIFICANCE

After injury, regenerating axons have to extend across the lesion site in the injured spinal cord to reestablish lost neuronal connections. While cell grafting and growth factor delivery can promote growth of injured axons, without proper guidance, axons rarely extend across the lesion site. Here, we show that alginate biomaterials with linear channels that are filled with cells expressing the growth-promoting neurotrophin BDNF promote linear axon extension throughout the channels after transplantation to the injured rat spinal cord. Animals that received the same cells but no alginate guidance structure did not show linear axonal growth and axons did not cross the lesion site. Thus, alginate-based scaffolds with a capillary structure are able to physically guide regenerating axons.

Characterization of nanostructured ureteral stent with gradient degradation in a porcine model

A tubular poly(ε-caprolactone) (PCL)/poly(lactide-co-glycolide) (PLGA) ureteral stent composed of nanofibers with micropores was fabricated by double-needle electrospinning. The stent was ureteroscopically inserted into six Changbai pigs, and the commercial polyurethane Shagong^® stent was inserted into four pigs as control. Intravenous pyelography revealed that the PCL/PLGA stent gradually degraded from the distal end to proximal terminal, and all stents were completely degraded at 10 weeks post-insertion. No significant difference was observed in hydronephrosis severity between the two groups. The levels of serum creatinine and urine pH remained similar throughout the study in the two groups, but the number of white blood cells in the urine was significantly higher in the Shagong^® stent group. On Day 70, histological evaluation indicated equivalent histological severity scores in the middle and distal ureter sections and bladder in the two groups. However, the PCL/PLGA stent-implanted pigs had significantly lower mean severity scores in the kidney and proximal ureter sites. These data revealed that the PCL/PLGA stent degraded in a controlled manner, did not induce obstruction, and had a lower urothelial impact in comparison to the Shagong^® stent, indicating that the stent exhibited great potential for clinical application.

New trends in spinal cord tissue engineering

ABSTRACT 

Restoration of lost neuronal function after spinal cord injury still remains a considerable challenge for current medicine. Over the last decade, regenerative medicine has recorded rapid and promising advancements in stem cell research, genetic engineering and the progression of new sophisticated biomaterials as well as nanotechnology. This advancement has also been reflected in neural tissue engineering, where, along with the development of a new generation of well-designed biopolymer scaffolds, multifactorial therapeutic strategies are being validated in order to determine the greatest possible repair efficacy of the complex CNS pathophysiology. Much attention is currently focused on the designing of multifunctional polymer scaffolds as systems for targeted drug or gene delivery, electrical stimulation or as substrates creating a special micro-environment, promoting the growth and desired differentiation of various cell lines. In this review, the latest advances in biomaterial technology together with various combinatorial strategies designed to treat spinal cord injury treatment are summarized and discussed.

Tissue engineering is a promising method for the repair of spinal cord injuries (Review)

Spinal cord injury (SCI) may lead to a devastating and permanent loss of neurological function, which may place a great economic burden on the family of the patient and society. Methods for reducing the death of neuronal cells, inhibiting immune and inflammatory reactions, and promoting the growth of axons in order to build up synapses with the target cells are the focus of current research. Target cells are located in the damaged spinal cord which create a connect with the scaffold. As tissue engineering technology is developed for use in a variety of different areas, particularly the biomedical field, a clear understanding of the mechanisms of tissue engineering is important. This review establishes how this technology may be used in basic experiments with regard to SCI and considers its potential future clinical use.