Undifferentiated human adipose-derived stromal/stem cells loaded onto wet-spun starch-polycaprolactone scaffolds enhance bone regeneration: nude mice calvarial defect in vivo study

Isolation and characterization of apical papilla cells from root end of human third molar and their differentiation into cementoblast cells: an in vitro study

BACKGROUND

Periodontal regeneration, treatment of periodontal-related diseases and improving the function of implants are global therapeutic challenges. The differentiation of human stem cells from apical papilla into cementoblasts may provide a strategy for periodontitis treatment. This study aimed to evaluate the differentiation of primary human stem cells apical papilla (hSCAPs) to cementoblast cells.

MATERIAL AND METHODS

SCAPs cells were isolated from human third molar and then incubated for 21 days in a differentiation microenvironment. Alkaline phosphatase (ALP) and Alizarin red S staining assays were performed to evaluate the calcium deposition and formation of hydroxyapatite in the cultured hSCAPs microenvironment. Real-time polymerase chain reaction (RT-PCR) assay was performed for cementum protein 1 (CEMP1), collagen type I (COL1), F-Spondin (SPON1), osteocalcin (OCN), and osteopontin (OPN) as specific markers of cementoblasts and their progenitors.

RESULTS

ALP phosphatase activity in day 21 of treatment demonstrated a significant increase in ALP compared to the control. Alizarin red S staining assay showed that the differentiated hSCAPs offered a great amount of calcium deposition nodules compared to the control. The increased expression level of CEMP1, OCN, OPN, COL1 and Spon1 was observed in days 7, 14 and 21 compared to the control, while greatest expression level was observed in day 21.

CONCLUSION

In conclusion, the differentiation microenviroment is convenient and useful for promoting the differentiation of hSCAPs into cementoblast.

Development of Intracorporeal Differentiation of Stem Cells to Induce One-Step Mastoid Bone Reconstruction during Otitis Media Surgeries

Mastoidectomy is a surgical procedure for the treatment of chronic otitis media. This study investigated the ability of rat stromal vascular fraction cells (rSVF) in combination with polycaprolactone (PCL) scaffolds and osteogenic differentiation-enhancing blood products to promote the regeneration of mastoid bone defect. Twenty male Sprague Dawley rats were randomly divided according to obliteration materials: (1) control, (2) PCL scaffold only, (3) rSVFs + PCL, (4) rSVFs + PCL + platelet-rich plasma, and (5) rSVFs + PCL + whole plasma (WP). At 7 months after transplantation, the rSVFs + PCL + WP group showed remarkable new bone formation in the mastoid. These results indicate that SVFs, PCL scaffolds, and blood products accelerate bone regeneration for mastoid reconstruction. Autologous SVF cells with PCL scaffolds and autologous blood products are promising composites for mastoid reconstruction which can be easily harvested after mastoidectomy. With this approach, the reconstruction of mastoid bone defects can be performed right after mastoidectomy as a one-step procedure which can offer efficiency in the clinical field.

Evaluation of the effects of starch on polyhydroxybutyrate electrospun scaffolds for bone tissue engineering applications

Efficient design for bone tissue engineering requires an understanding of the appropriate selection of biomimetic natural or synthetic materials and scalable fabrication technologies. In this research, poly (3-hydroxybutyrate) (PHB) and starch (5-15 wt%) as biological macromolecules were used to fabricate novel biomimetic scaffolds by electrospinning method. SEM results of electrospun scaffolds revealed bead-free nanofibers and three-dimensional homogenous structures with highly interconnected pores. Results of FTIR and Raman demonstrated that there were hydrogen bonds between the two polymers. The tensile strength of scaffolds was significantly improved by adding starch up to 10 wt%, from 3.05 to 15.54 MPa. In vitro degradation and hydrophilicity of the scaffolds were improved with the presence of starch. The viability and proliferation of MG-63 cells and alkaline phosphatase (ALP) activity were remarkably increased in the PHB-starch scaffolds compared to the PHB and control samples. The mineralization and calcium deposition of MG-63 cells were confirmed by alizarin red staining. It is concluded that PHB/starch electrospun scaffold could be a good candidate for bone tissue engineering applications.

Magneto-sensitive decellularized bone matrix with or without low frequency-pulsed electromagnetic field exposure for the healing of a critical-size bone defect

Bioactive ECM-based materials mimic the complex composition and structure of natural tissues. Decellularized cancellous bone matrix (DBM) has potential for guiding new bone formation and accelerating the regeneration process. On the other hand, low frequency-pulsed electromagnetic field (LF-PEMF) has been shown to enhance the regeneration capacity of bone defects. The present study sought to explore the feasibility of using DBM and DBM/MNP, and LF-PEMF for treating critical-size bone defects. Firstly, decellularization protocol was optimized to obtain a bioactive DBM, then MNPs were incorporated. Later, the physical, chemical and biological properties of DBM and DBM/MNP were assessed in vitro. MNPs homogeneously distributed into the DBM were not found to be toxic to human osteoblast cultures. Finally, an in vivo study was carried out with DBM and DBM/MNP composites in a bilateral critical-size rat cranial defect model (n = 48) with or without LF-PEMF exposure for 45 and 90 days. The histomorphometric and radiographic evaluations revealed that, while the collagen (positive control) and Sham (negative control) groups showed high incidence of fibrous connective tissue together with low level of osteogenic activity, both the DBM and DBM/MNP-grafted groups significantly promoted new bone tissue formation and angiogenesis, by the appropriate use of LF-PEMF for 90 days.

Adipose tissue-derived stem cells: a comparative review on isolation, culture, and differentiation methods

Adipose tissue-derived stem cells (ADSCs) are an available source of mesenchymal stem cells with the appropriate capacity to in vitro survive, propagate, and differentiate into cells from three lineages of ectoderm, mesoderm, and endoderm. The biological features of ADSCs depend on the donor physiology and health status, isolation procedure, culture conditions, and differentiation protocols used. Adipose tissue samples are provided by surgery and lipoaspiration-based methods and subjected to various mechanical and chemical digestion techniques to finally generate a heterogeneous mixture named stromal vascular fraction (SVF). ADSCs are purified through varied cell populations that exist within SVF and cultured under standard conditions to give rise to a highly rich resource of stem cells directly applied in the clinic or differentiated into a wide range of cells. The development and optimization of conventional isolation, expansion, and differentiation methods seem noteworthy to preserve the desirable biological functions of ADSCs in pre-clinical and clinical investigations.

Evaluation of bone regeneration in mandible large defect using undifferentiated adipose stem cells loaded on gelatin carrier: An animal model case study

Background. Large mandibular defects are considered difficult reconstructive challenges for oral and maxillofacial surgeons. Cell therapy, as an alternative technique, might increase the speed of bone regeneration. This study aimed to investigate bone regeneration in large defects of dog mandibles using allogenic adipose-derived stem cells on gelatin foam as a cell carrier. Methods. The tissue engineering phase consisted of the sampling of adult dogs' adipose tissue that can easily be isolated from adipose stem cells (ASCs) of the dogs, ASCs were cultured in Dulbecco's Modified Eagle's Medium (DMEM, Gibco, USA) with low glucose, containing 10% fetal bovine serum (FBS) (Sigma, USA) and 1% penicillin-streptomycin (Gibco, USA), with the characterization of dog ASCs and gelatin-transplanted ASCs. Six dogs were included in this experimental study in the next step and randomly assigned to the treatment and control groups. The samples in both groups underwent surgery under general anesthesia to create uniform 3-cm bony defects. The samples in both groups were reconstructed with titanium reconstruction plates and screws. A large bone gap filled with ASCs (5×10⁶ ) was seeded on gelatin (ASCs) in the treatment group. In the control group, bony defects were filled with a cell delivery carrier without ASCs. Six months after transplantation, the animals' mandibles were evaluated by CT scan imaging, and the results were quantified through the Hounsfield unit (HU). The data were analyzed with t-test. Results. Before transplantation, the nature of the stem cells was confirmed by the expression of CD44 and CD105 cell markers at 71.9% and 89.3%, respectively, and a lack of the CD45 cell marker expression at 2.2%. Evaluation of CT scan images showed significantly higher bone repair in the ASCs group (920.25±572.92 HU) than in the control group (-94.746± 08.42). Conclusion. The bone regeneration of the ASCs group was significantly higher than that in the control group.

Comparison of bone regenerative capacity of donor-matched human adipose-derived and bone marrow mesenchymal stem cells

Adipose-derived stem cells (ASC) have been used as an alternative to bone marrow mesenchymal stem cells (BMSC) for bone tissue engineering. However, the efficacy of ASC in bone regeneration in comparison with BMSC remains debatable, since inconsistent results have been reported. Comparing ASC with BMSC obtained from different individuals might contribute to this inconsistency in results. Therefore, this study aimed to compare the bone regenerative capacity of donor-matched human ASC and BMSC seeded onto poly(l-lactide-co-ε-caprolactone) scaffolds using calvarial bone defects in nude rats. First, donor-matched ASC and BMSC were seeded onto the co-polymer scaffolds to evaluate their in vitro osteogenic differentiation. Seeded scaffolds and scaffolds without cells (control) were then implanted in calvarial defects in nude rats. The expression of osteogenesis-related genes was examined after 4 weeks. Cellular activity was investigated after 4 and 12 weeks. Bone formation was evaluated radiographically and histologically after 4, 12, and 24 weeks. In vitro, ASC and BMSC demonstrated mineralization. However, BMSC showed higher alkaline phosphatase activity than ASC. In vivo, human osteogenesis–related genes Runx2 and collagen type I were expressed in defects with scaffold/cells. Defects with scaffold/BMSC had higher cellular activity than defects with scaffold/ASC. Moreover, bone formation in defects with scaffold/BMSC was greater than in defects with scaffold/ASC, especially at the early time-point. These results suggest that although ASC have the potential to regenerate bone, the rate of bone regeneration with ASC may be slower than with BMSC. Accordingly, BMSC are more suitable for bone regenerative applications.

Adipose-derived stem cells: An appropriate selection for osteogenic differentiation

Mesenchymal stem cells (MSCs) are a major component of various forms of tissue engineering. MSCs have self-renewal and multidifferential potential. Osteogenic differentiation of MSCs is an area of attention in bone regeneration. One form of MSCs are adipose-derived stem cells (ASCs), which can be simply harvested and differentiated into several cell lineages, such as chondrocytes, adipocytes, or osteoblasts. Due to special properties, ASCs are frequently used in vitro and in vivo bone regeneration. Identifying factors involved in osteogenic differentiation of ASCs is important for better understanding the mechanism of osteogenic differentiation. Different methods are used to stimulate osteogenesis of ASCs in literature, including common osteogenic media, growth factors, hormones, hypoxia, mechanical and chemical stimuli, genetic modification, and nanotechnology. This review article provides an overview describing the isolation procedure, characterization, properties, current methods for osteogenic differentiation of ASCs, and their basic biological mechanism.

Bone regeneration of minipig mandibular defect by adipose derived mesenchymal stem cells seeded tri-calcium phosphate- poly(D,L-lactide-co-glycolide) scaffolds

Reconstruction of bone defects represents a serious issue for orthopaedic and maxillofacial surgeons, especially in extensive bone loss. Adipose-derived mesenchymal stem cells (ADSCs) with tri-calcium phosphates (TCP) are widely used for bone regeneration facilitating the formation of bone extracellular matrix to promote reparative osteogenesis. The present study assessed the potential of cell-scaffold constructs for the regeneration of extensive mandibular bone defects in a minipig model. Sixteen skeletally mature miniature pigs were divided into two groups: Control group and scaffolds seeded with osteogenic differentiated pADSCs (n = 8/group). TCP-PLGA scaffolds with or without cells were integrated in the mandibular critical size defects and fixed by titanium osteosynthesis plates. After 12 weeks, ADSCs seeded scaffolds (n = 7) demonstrated significantly higher bone volume (34.8% ± 4.80%) than scaffolds implanted without cells (n = 6, 22.4% ± 9.85%) in the micro-CT (p < 0.05). Moreover, an increased amount of osteocalcin deposition was found in the test group in comparison to the control group (27.98 ± 2.81% vs 17.10 ± 3.57%, p < 0.001). In conclusion, ADSCs seeding on ceramic/polymer scaffolds improves bone regeneration in large mandibular defects. However, further improvement with regard to the osteogenic capacity is necessary to transfer this concept into clinical use.

Biphasic Hydrogels Integrating Mineralized and Anisotropic Features for Interfacial Tissue Engineering

The innate graded structural and compositional profile of musculoskeletal tissue interfaces is disrupted and replaced by fibrotic tissue in the context of disease and degeneration. Tissue engineering strategies focused on the restoration of the transitional complexity found in those junctions present special relevance for regenerative medicine. Herein, we developed a gelatin-based multiphasic hydrogel system, where sections with distinct composition and microstructure were integrated in a single unit. In each phase, hydroxyapatite particles or cellulose nanocrystals (CNC) were incorporated into an enzymatically cross-linked gelatin network to mimic bone or tendon tissue, respectively. Stiffer hydrogels were produced with the incorporation of mineralized particles, and magnetic alignment of CNC resulted in anisotropic structure formation. The evaluation of the biological commitment with human adipose-derived stem cells toward the tendon-to-bone interface revealed an aligned cell growth and higher synthesis and deposition of tenascin in the anisotropic phase, while the activity of the secreted alkaline phosphatase and the expression of osteopontin were induced in the mineralized phase. These results highlight the potential versatility offered by gelatin-transglutaminase enzyme tandem for the development of strategies that mimic the graded, composite, and complex intersections of the connective tissues.

Adipose-Derived Stem Cells in Bone Tissue Engineering: Useful Tools with New Applications

Adipose stem cells (ASCs) are a crucial element in bone tissue engineering (BTE). They are easy to harvest and isolate, and they are available in significative quantities, thus offering a feasible and valid alternative to other sources of mesenchymal stem cells (MSCs), like bone marrow. Together with an advantageous proliferative and differentiative profile, they also offer a high paracrine activity through the secretion of several bioactive molecules (such as growth factors and miRNAs) via a sustained exosomal release which can exert efficient conditioning on the surrounding microenvironment. BTE relies on three key elements: (1) scaffold, (2) osteoprogenitor cells, and (3) bioactive factors. These elements have been thoroughly investigated over the years. The use of ASCs has offered significative new advancements in the efficacy of each of these elements. Notably, the phenotypic study of ASCs allowed discovering cell subpopulations, which have enhanced osteogenic and vasculogenic capacity. ASCs favored a better vascularization and integration of the scaffolds, while improvements in scaffolds' materials and design tried to exploit the osteogenic features of ASCs, thus reducing the need for external bioactive factors. At the same time, ASCs proved to be an incredible source of bioactive, proosteogenic factors that are released through their abundant exosome secretion. ASC exosomes can exert significant paracrine effects in the surroundings, even in the absence of the primary cells. These paracrine signals recruit progenitor cells from the host tissues and enhance regeneration. In this review, we will focus on the recent discoveries which have involved the use of ASCs in BTE. In particular, we are going to analyze the different ASCs' subpopulations, the interaction between ASCs and scaffolds, and the bioactive factors which are secreted by ASCs or can induce their osteogenic commitment. All these advancements are ultimately intended for a faster translational and clinical application of BTE.

Current development of biodegradable polymeric materials for biomedical applications

In the last half-century, the development of biodegradable polymeric materials for biomedical applications has advanced significantly. Biodegradable polymeric materials are favored in the development of therapeutic devices, including temporary implants and three-dimensional scaffolds for tissue engineering. Further advancements have occurred in the utilization of biodegradable polymeric materials for pharmacological applications such as delivery vehicles for controlled/sustained drug release. These applications require particular physicochemical, biological, and degradation properties of the materials to deliver effective therapy. As a result, a wide range of natural or synthetic polymers able to undergo hydrolytic or enzymatic degradation is being studied for biomedical applications. This review outlines the current development of biodegradable natural and synthetic polymeric materials for various biomedical applications, including tissue engineering, temporary implants, wound healing, and drug delivery.

Effects of three-dimensionally printed polycaprolactone/β-tricalcium phosphate scaffold on osteogenic differentiation of adipose tissue- and bone marrow-derived stem cells

BACKGROUND

Autogenous bone grafts have several limitations including donor-site problems and insufficient bone volume. To address these limitations, research on bone regeneration is being conducted actively. In this study, we investigate the effects of a three-dimensionally (3D) printed polycaprolactone (PCL)/tricalcium phosphate (TCP) scaffold on the osteogenic differentiation potential of adipose tissue-derived stem cells (ADSCs) and bone marrow-derived stem cells (BMSCs).

METHODS

We investigated the extent of osteogenic differentiation on the first and tenth day and fourth week after cell culture. Cytotoxicity of the 3D printed PCL/β-TCP scaffold was evaluated by 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium assay, prior to osteogenic differentiation analysis. ADSCs and BMSCs were divided into three groups: C, only cultured cells; M, cells cultured in the 3D printed PCL/β-TCP scaffold; D, cells cultured in the 3D printed PCL/β-TCP scaffold with a bone differentiation medium. Alkaline phosphatase (ALP) activity assay, von Kossa staining, reverse transcription-polymerase chain reaction (RT-PCR), and Western blotting were performed for comparative analysis.

RESULTS

ALP assay and von Kossa staining revealed that group M had higher levels of osteogenic differentiation compared to group C. RT-PCR showed that gene expression was higher in group M than in group C, indicating that, compared to group C, osteogenic differentiation was more extensive in group M. Expression levels of proteins involved in ossification were higher in group M, as per the Western blotting results.

CONCLUSION

Osteogenic differentiation was increased in mesenchymal stromal cells (MSCs) cultured in the 3D printed PCL/TCP scaffold compared to the control group. Osteogenic differentiation activity of MSCs cultured in the 3D printed PCL/TCP scaffold was lower than that of cells cultured on the scaffold in bone differentiation medium. Collectively, these results indicate that the 3D printed PCL/TCP scaffold promoted osteogenic differentiation of MSCs and may be widely used for bone tissue engineering.

Photocrosslinked Dextran-Based Hydrogels as Carrier System for the Cells and Cytokines Induce Bone Regeneration in Critical Size Defects in Mice

Modified biomaterials have for years been the focus of research into establishing new bone substitutes. In our preceding in vitro study employing different cell cultures, we developed chemically and mechanically characterized hydrogels based on photocrosslinkable dextran derivatives and demonstrated their cytocompatibility and their beneficial effects on the proliferation of osteoblasts and endothelial cells. In the present in vivo study, we investigate photocrosslinked dextran-based hydrogels in critical size defects in mice to evaluate their potential as carrier systems for cells or for a specific angiogenesis enhancing cytokine to induce bone formation. We could demonstrate that, with optimized laboratory practice, the endotoxin content of hydrogels could be reduced below the Food and Drug Administration (FDA)-limit. Dextran-based hydrogels were either loaded with a monoculture of endothelial cells or a co-culture of human osteoblasts with endothelial cells, or with stromal-derived-growth factor (SDF-1). Scaffolds were implanted into a calvarial defect of critical size in mice and their impact on bone formation was assessed by µCt-analyses, histology and immunohistology. Our study demonstrates that promotion of angiogenesis either by SDF-1 or a monoculture of endothelial cells induces bone regeneration at a physiological level. These in vivo results indicate the potential of dextran-based hydrogel composites in bone regeneration to deliver cells and cytokines to the defect site.

Heritable Skeletal Disorders Arising from Defects in Processing and Transport of Type I Procollagen from the ER: Perspectives on Possible Therapeutic Approaches

Rare bone disorders are a heterogeneous group of diseases, initially associated with mutations in type I procollagen (PC) genes. Recent developments from dissection at the molecular and cellular level have expanded the list of disease-causing proteins, revealing that disruption of the machinery that handles protein secretion can lead to failure in PC secretion and in several cases result in skeletal dysplasia. In parallel, cell-based in vitro studies of PC trafficking pathways offer clues to the identification of new disease candidate genes. Together, this raises the prospect of heritable bone disorders as a paradigm for biosynthetic protein traffic-related diseases, and an avenue through which therapeutic strategies can be explored.Here, we focus on human syndromes linked to defects in type I PC secretion with respect to the landscape of biosynthetic and protein transport steps within the early secretory pathway. We provide a perspective on possible therapeutic interventions for associated heritable craniofacial and skeletal disorders, considering different orders of complexity, from the cellular level by manipulation of proteostasis pathways to higher levels involving cell-based therapies for bone repair and regeneration.

Osteointegration of Porous Poly-ε-Caprolactone-Coated and Previtalised Magnesium Implants in Critically Sized Calvarial Bone Defects in the Mouse Model

Metallic biomaterials are widely used in maxillofacial surgery. While titanium is presumed to be the gold standard, magnesium-based implants are a current topic of interest and investigation due to their biocompatible, osteoconductive and degradable properties. This study investigates the effects of poly-ε-caprolactone-coated and previtalised magnesium implants on osteointegration within murine calvarial bone defects: After setting a 3 mm × 3 mm defect into the calvaria of 40 BALB/c mice the animals were treated with poly-ε-caprolactone-coated porous magnesium implants (without previtalisation or previtalised with either osteoblasts or adipose derived mesenchymal stem cells), porous Ti6Al4V implants or without any implant. To evaluate bone formation and implant degradation, micro-computertomographic scans were performed at day 0, 28, 56 and 84 after surgery. Additionally, histological thin sections were prepared and evaluated histomorphometrically. The outcomes revealed no significant differences within the differently treated groups regarding bone formation and the amount of osteoid. While the implant degradation resulted in implant shifting, both implant geometry and previtalisation appeared to have positive effects on vascularisation. Although adjustments in degradation behaviour and implant fixation are indicated, this study still considers magnesium as a promising alternative to titanium-based implants in maxillofacial surgery in future.

Human Adipose-Derived Stromal Cell Isolation Methods and Use in Osteogenic and Adipogenic In Vivo Applications

Adipose tissue represents an abundant and easily accessible source of multipotent cells, which may serve as excellent building blocks for tissue engineering. This article presents a newly described protocol for isolating adipose-derived stromal cells (ASCs) from human lipoaspirate, compared to the standard protocol for harvesting ASCs established in 2001. Human ASC isolation is performed using two methods, and resultant cells are compared through cell yield, cell viability, cell proliferation and regenerative potential. The osteogenic and adipogenic potential of ASCs isolated using both protocols are assessed in vitro and gene expression analysis is performed. The focus of this series of protocols is the regenerative potential of both cell populations in vivo. As such, the two in vivo animal models described are fat graft retention (soft tissue reconstruction) and calvarial defect healing (bone regeneration). The techniques described comprise fat grafting with cell assisted lipotransfer, and calvarial defect creation healed with cell-seeded scaffolds. © 2017 by John Wiley & Sons, Inc.

CD34+ cells seeded in collagen scaffolds promote bone formation in a mouse calvarial defect model

Bone tissue engineering (BTE) holds promise for managing the clinical problem of large bone defects. However, clinical adoption of BTE is limited due to limited vascularization of constructs, which could be circumvented by pre-cultivation of osteogenic and endothelial derived cells in natural-based polymer scaffolds. However, until now not many studies compared the effect of mono- and cocultures pre-seeded in collagen before implantation. We utilized a mouse calvarial defect model and compared five groups of collagen scaffolds: a negative control of a collagen scaffold alone, a positive control treated with BMP-7, monocultures of either human osteoblasts (hOBs) or CD34+ cells, and a coculture of hOB and CD34⁺ cells. Each pre-seeded collagen scaffold was implanted in mice. After 6 weeks mice were sacrificed and their skulls prepared for volumetric and histologic analysis. We found that a monoculture of CD34⁺ cells and a coculture of hOB and CD34⁺ cells pre-cultured in the collagen scaffold increased bone regeneration to a similar extend. In these groups, greater amounts of new bone were found compared with hOB monocultures. Interestingly, monoculture of CD34⁺ cells demonstrated better fracture healing than monoculture of hOBs, emphasizing the possible role of angiogenesis. Our results are promising regarding a cellular based collagen BTE construct, but more work is needed to understand the complex interaction between the osteogenic and endothelial cells. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1505-1516, 2018.

Improved Bone Regeneration With Multiporous PLGA Scaffold and BMP-2-Transduced Human Adipose-Derived Stem Cells by Cell-Permeable Peptide

OBJECTIVE

Currently, much work has focused on the engineering of bone using adipose-derived stem cells (ADSCs), which differentiate into osteogenic cells. This study was conducted to assess the bone-regenerating capacity of ADSCs with genetic modification.

MATERIALS AND METHODS

ADSCs were cultured and transduced with recombinant adenovirus-expressing bone morphogenetic protein-2 (rAd/BMP-2). Two 5-mm full-thickness bone defects were created on the parietal bones of 24 rats. The defects were left empty (n = 12), restored with a scaffold alone (n = 12), transplanted with ADSCs in osteogenic media (n = 12), or transplanted with rAd/BMP-2-transduced ADSCs (n = 12). Six defects from each group were assessed by histologic observation, histomorphometric analysis, and microcomputed tomography (micro-CT) imaging at 4 and 8 weeks after transplantation.

RESULTS

Increased new bone formation was observed in the rAd/BMP-2-transduced ADSC groups, compared with the other groups. On micro-CT, significant differences were noted in bone volume-to-tissue volume ratios between rAd/BMP-2-transduced ADSCs group and the other groups at both time points (P < 0.05).

CONCLUSION

The result demonstrates that transferring BMP-2 promotes the osteogenic differentiation of ADSCs and enhances bone regeneration. Under limitation of this study, genetic modification of ADSCs with BMP-2 could be adopted in clinical application.

A Novel Method of Human Adipose-Derived Stem Cell Isolation with Resultant Increased Cell Yield

BACKGROUND

The authors have developed a novel protocol for isolating adipose-derived stem cells from human lipoaspirate. In this study, they compare their new method to a previously published standard protocol.

METHODS

Human adipose-derived stem cell isolation was performed using two methods to compare cell yield, cell viability, cell proliferation, and regenerative potential. The new and conventional isolation methods differ in two key areas: the collagenase digestion buffer constituents and the use of an orbital shaker. The osteogenic and adipogenic potential of adipose-derived stem cells isolated using both protocols was assessed in vitro, and gene expression analysis was performed. To assess the ability of the isolated cells to generate bone in vivo, the authors created critical-size calvarial defects in mice, which were treated with adipose-derived stem cells loaded onto hydroxyapatite-coated poly(lactic-co-glycolic acid) scaffolds. To test the ability of the isolated cells to enhance adipogenesis, the cells were added to lipoaspirate and placed beneath the scalp of immunocompromised mice. Fat graft volume retention was subsequently assessed by serial computed tomographic volumetric scanning.

RESULTS

The new method resulted in a 10-fold increased yield of adipose-derived stem cells compared with the conventional method. Cells harvested using the new method demonstrated significantly increased cell viability and proliferation in vitro (p < 0.05). New method cells also demonstrated significantly enhanced osteogenic and adipogenic differentiation capacity in vitro (p < 0.05) in comparison with the conventional method cells. Both cell groups demonstrated equivalent osteogenic and adipogenic regenerative potential in mice.

CONCLUSIONS

The authors have developed a protocol that maximizes the yield of adipose-derived stem cells derived from lipoaspirate. The new method cells have increased osteogenic and adipogenic potential in vitro and are not inferior to conventional method cells in terms of their ability to generate bone and fat in vivo.

CLINICAL QUESTION/LEVEL OF EVIDENCE

Therapeutic, V.

Adipose-derived stem cell therapies for bone regeneration

INTRODUCTION

Cell-based therapies exploit the heterogeneous and self-sufficient biological environment of stem cells to restore, maintain and improve tissue functions. Adipose-derived stem cells (ASCs) are, to this aim, promising cell types thanks to advantageous isolation procedures, growth kinetics, plasticity and trophic properties. Specifically, bone regeneration represents a suitable, though often challenging, target setting to test and apply ASC-based therapeutic strategies. Areas covered: ASCs are extremely plastic and secrete bioactive peptides that mediate paracrine functions, mediating their trophic actions in vivo. Numerous preclinical studies demonstrated that ASCs improve bone healing. Clinical trials are ongoing to validate the clinical feasibility of these approaches. This review is intended to define the state-of-the-art on ASCs, encompassing the biological features that make them suitable for bone regenerative strategies, and to provide an update on existing preclinical and clinical applications. Expert opinion: ASCs offer numerous advantages over other stem cells in terms of feasibility of clinical translation. Data obtained from in vivo experimentation are encouraging, and clinical trials are ongoing. More robust validations are thus expected to be achieved during the next few years, and will likely pave the way to optimized patient-tailored treatments for bone regeneration.

Augmenting in vitro osteogenesis of a glycine–arginine–glycine–aspartic-conjugated oxidized alginate–gelatin–biphasic calcium phosphate hydrogel composite and in vivo bone biogenesis through stem cell delivery

A functionally modified peptide-conjugated hydrogel system was fabricated with oxidized alginate/gelatin loaded with biphasic calcium phosphate to improve its biocompatibility and functionality. Sodium alginate was treated by controlled oxidation to transform the cis-diol group into an aldehyde group in a controlled manner, which was then conjugated to the amine terminus of glycine–arginine–glycine–aspartic. Oxidized alginate glycine–arginine–glycine–aspartic was then combined with gelatin-loaded biphasic calcium phosphate to form a hydrogel of composite oxidized alginate/gelatin/biphasic calcium phosphate that displayed enhanced human adipose stem cell adhesion, spreading and differentiation. 1H nuclear magnetic resonance and electron spectroscopy for chemical analysis confirmed that the glycine–arginine–glycine–aspartic was successfully grafted to the oxidized alginate. Co-delivery of glycine–arginine–glycine–aspartic and human adipose stem cell in a hydrogel matrix was studied with the results indicating that hydrogel incorporated modified with glycine–arginine–glycine–aspartic and seeded with human adipose stem cell enhanced osteogenesis in vitro and bone formation in vivo.

The performance of bone tissue engineering scaffolds in in vivo animal models: A systematic review

Bone tissue engineering is an excellent alternative for the regeneration of large bone defects caused by trauma or bone pathologies. Scaffolds, stem cells, and bioactive molecules are the three key components of bone regeneration. Although a wide range of biomaterials of various compositions and structures has been proposed in the literature, these materials are rarely used in clinical applications. Therefore, more standardized studies are required to design scaffolds that enable better bone regeneration and are suitable for clinical use. The aim of this systematic review was to compare the performance of scaffolds used in preclinical animal studies to determine which class of materials has achieved a higher rate of bone neoformation (osteoinduction and osteoconduction). The selected studies were divided into three groups according to the following experimental models: studies that used subcutaneous models, bone defects in calvaria, and bone defects in long bones. Despite the large number of parameters in the included studies, we generally concluded that biomaterials containing calcium phosphates had important osteoinductive effects and were essential for better performance of the materials. Furthermore, natural polymers generally had better performance than synthetic polymers did, especially when the materials were associated with stem cells. The combination of materials from different classes was the most promising strategy for bone tissue regeneration.

Adipose-derived stem cells undergo spontaneous osteogenic differentiation in vitro when passaged serially or seeded at low density

Adipose-derived stem cells (ADSCs) are a convenient source of cells for regenerating tissue. Widespread application of ADSCs requires that they propagate efficiently and differentiate in vitro. We investigated the differentiation potential of ADSCs during long-term expansion in vitro and when the cells were seeded at low density. ADSCs were isolated from the inguinal fat pads of 3-week-old male rats, then cultured serially for 12 passages; some ADSCs at passage 3 were seeded at low density. The differentiation potential of ADSCs from passage 3 to passage 12 was assessed by their capacity for adipogenesis and osteogenesis while cultured in specific induction media. Spontaneous osteogenesis of ADSCs at passage 12 and of ADSCs that were seeded at low density was detected by western blotting, alizarin red S staining and measurement of alkaline phosphatase (ALP) activity. We found that with increasing passage number, the adipogenic potential of ADSCs decreased and osteogenic differentiation increased. Alizarin red S staining, bone morphogenetic protein-2 (BMP-2) and runt-related transcription factor 2 (Runx2) expressions, and ALP activity demonstrated that both ADSCs at passage 12 and those that were seeded at low density differentiated into osteoblasts without additional induction factors.

Mechanoresponsive musculoskeletal tissue differentiation of adipose-derived stem cells

Musculoskeletal tissues are constantly under mechanical strains within their microenvironment. Yet, little is understood about the effect of in vivo mechanical milieu strains on cell development and function. Thus, this review article outlines the in vivo mechanical environment of bone, muscle, cartilage, tendon, and ligaments, and tabulates the mechanical strain and stress in these tissues during physiological condition, vigorous, and moderate activities. This review article further discusses the principles of mechanical loading platforms to create physiologically relevant mechanical milieu in vitro for musculoskeletal tissue regeneration. A special emphasis is placed on adipose-derived stem cells (ADSCs) as an emerging valuable tool for regenerative musculoskeletal tissue engineering, as they are easily isolated, expanded, and able to differentiate into any musculoskeletal tissue. Finally, it highlights the current state-of-the art in ADSCs-guided musculoskeletal tissue regeneration under mechanical loading.

Osteogenic differentiation of human mesenchymal stem cells in the absence of osteogenic supplements: A surface-roughness gradient study

The use of biomaterials to direct osteogenic differentiation of human mesenchymal stem cells (hMSCs) in the absence of osteogenic supplements is thought to be part of the next generation of orthopedic implants. We previously engineered surface-roughness gradients of average roughness (Ra) varying from the sub-micron to the micrometer range (∼0.5-4.7 μm), and mean distance between peaks (RSm) gradually varying from ∼214 μm to 33 μm. Here we have screened the ability of such surface-gradients of polycaprolactone to influence the expression of alkaline phosphatase (ALP), collagen type 1 (COL1) and mineralization by hMSCs cultured in dexamethasone (Dex)-deprived osteogenic induction medium (OIM) and in basal growth medium (BGM). Ra∼1.53 μm/RSm∼79 μm in Dex-deprived OI medium, and Ra∼0.93 μm/RSm∼135 μm in BGM consistently showed higher effectiveness at supporting the expression of the osteogenic markers ALP, COL1 and mineralization, compared to the tissue culture polystyrene (TCP) control in complete OIM. The superior effectiveness of specific surface-roughness revealed that this strategy may be used as a compelling alternative to soluble osteogenic inducers in orthopedic applications featuring the clinically relevant biodegradable polymer polycaprolactone.

STATEMENT OF SIGNIFICANCE

Biodegradable polymers, such as polycaprolactone (PCL), are promising materials in the field of tissue engineering and regenerative medicine, which aims at creating viable options to replace permanent orthopedic implants. The material, cells, and growth-stimulating factors are often referred to as the key components of engineered tissues. In this article, we studied the hypothesis of specific surface modification of PCL being capable of inducing mesenchymal stem cell differentiation in bone cells in the absence of cell-differentiating factors. The systematic investigation of the linearly varying surface-roughness gradient showed that an average PCL roughness of 0.93 μm alone can serve as a compelling alternative to soluble osteogenic inducers in orthopedic applications featuring the clinically relevant biodegradable polymer polycaprolactone.

Comprehensive Review of Adipose Stem Cells and Their Implication in Distraction Osteogenesis and Bone Regeneration

Bone is one of the most dynamic tissues in the human body that can heal following injury without leaving a scar. However, in instances of extensive bone loss, this intrinsic capacity of bone to heal may not be sufficient and external intervention becomes necessary. Several techniques are available to address this problem, including autogenous bone grafts and allografts. However, all these techniques have their own limitations. An alternative method is the technique of distraction osteogenesis, where gradual and controlled distraction of two bony segments after osteotomy leads to induction of new bone formation. Although distraction osteogenesis usually gives satisfactory results, its major limitation is the prolonged duration of time required before the external fixator is removed, which may lead to numerous complications. Numerous methods to accelerate bone formation in the context of distraction osteogenesis have been reported. A viable alternative to autogenous bone grafts for a source of osteogenic cells is mesenchymal stem cells from bone marrow. However, there are certain problems with bone marrow aspirate. Hence, scientists have investigated other sources for mesenchymal stem cells, specifically adipose tissue, which has been shown to be an excellent source of mesenchymal stem cells. In this paper, the potential use of adipose stem cells to stimulate bone formation is discussed.

A comparison of tissue engineering based repair of calvarial defects using adipose stem cells from normal and osteoporotic rats

Repairing large bone defects presents a significant challenge, especially in those people who have a limited regenerative capacity such as in osteoporotic (OP) patients. The aim of this study was to compare adipose stem cells (ASCs) from both normal (NORM) and ovariectomized (OVX) rats in osteogenic potential using both in vitro and in vivo models. After successful establishment of a rat OP model, we found that ASCs from OVX rats exhibited a comparable proliferation capacity to those from NORM rats but had significantly higher adipogenic and relatively lower osteogenic potential. Thirty-two weeks post-implantation with poly(lactic-co-glycolic acid) (PLGA) alone or PLGA seeded with osteogenic-induced ASCs for critical-size calvarial defects, the data from Herovici's collagen staining and micro-computed tomography suggested that the implantation of ASC-PLGA constructs exhibited a higher bone volume density compared to the PLGA alone group, especially in the NORM rat group. Intriguingly, the defects from OVX rats exhibited a higher bone volume density compared to NORM rats, especially for implantation of the PLGA alone group. Our results indicated that ASC based tissue constructs are more beneficial for the repair of calvarial defects in NORM rats while implantation of PLGA scaffold contributed to defect regeneration in OVX rats.

Biomaterials for craniofacial bone engineering

Conditions such as congenital anomalies, cancers, and trauma can all result in devastating deficits of bone in the craniofacial skeleton. This can lead to significant alteration in function and appearance that may have significant implications for patients. In addition, large bone defects in this area can pose serious clinical dilemmas, which prove difficult to remedy, even with current gold standard surgical treatments. The craniofacial skeleton is complex and serves important functional demands. The necessity to develop new approaches for craniofacial reconstruction arises from the fact that traditional therapeutic modalities, such as autologous bone grafting, present myriad limitations and carry with them the potential for significant complications. While the optimal bone construct for tissue regeneration remains to be elucidated, much progress has been made in the past decade. Advances in tissue engineering have led to innovative scaffold design, complemented by progress in the understanding of stem cell-based therapy and growth factor enhancement of the healing cascade. This review focuses on the role of biomaterials for craniofacial bone engineering, highlighting key advances in scaffold design and development.

Evaluation of a starch-based double layer scaffold for bone regeneration in a rat model

Damages in the maxillofacial bones are frequent in humans following trauma, metabolic diseases, neoplasia, or inflammatory processes. Many of the available treatments to regenerate bone are often ineffective. The goal of this work was to assess the in vivo behavior of an innovative double-layered scaffold based on a blend of starch and polycaprolactone (SPCL) that comprises a membrane obtained by solvent casting, which aims to act as a guided tissue regeneration membrane, and a wet-spun fiber mesh (in some cases functionalized with osteoconductive silanol groups) targeting bone regeneration. The behavior of the double layer scaffold, functionalized with silanol groups (SPCL-Si) or without (SPCL), was assessed in a mandibular rodent model and compared to a commercial collagen membrane (positive control) and to empty defects (negative control). After 8 weeks of implantation, the micro-computed tomography and the histomorphometric analysis revealed that the SPCL-Si scaffolds induced significantly higher new bone formation compared to the collagen membrane and to the empty defects, although they had a similar performance when compared to the SPCL scaffolds.

Chitosan-based scaffolds for bone tissue engineering

Bone defects requiring grafts to promote healing are frequently occurring and costly problems in health care. Chitosan, a biodegradable, naturally occurring polymer, has drawn considerable attention in recent years as scaffolding material in tissue engineering and regenerative medicine. Chitosan is especially attractive as a bone scaffold material because it supports the attachment and proliferation of osteoblast cells as well as formation of mineralized bone matrix. In this review, we discuss the fundamentals of bone tissue engineering and the unique properties of chitosan as a scaffolding material to treat bone defects for hard tissue regeneration. We present the common methods for fabrication and characterization of chitosan scaffolds, and discuss the influence of material preparation and addition of polymeric or ceramic components or biomolecules on chitosan scaffold properties such as mechanical strength, structural integrity, and functional bone regeneration. Finally, we highlight recent advances in development of chitosan-based scaffolds with enhanced bone regeneration capability.

Adipose-derived stem cells: a review of signaling networks governing cell fate and regenerative potential in the context of craniofacial and long bone skeletal repair

Improvements in medical care, nutrition and social care are resulting in a commendable change in world population demographics with an ever increasing skew towards an aging population. As the proportion of the world's population that is considered elderly increases, so does the incidence of osteodegenerative disease and the resultant burden on healthcare. The increasing demand coupled with the limitations of contemporary approaches, have provided the impetus to develop novel tissue regeneration therapies. The use of stem cells, with their potential for self-renewal and differentiation, is one potential solution. Adipose-derived stem cells (ASCs), which are relatively easy to harvest and readily available have emerged as an ideal candidate. In this review, we explore the potential for ASCs to provide tangible therapies for craniofacial and long bone skeletal defects, outline key signaling pathways that direct these cells and describe how the developmental signaling program may provide clues on how to guide these cells in vivo. This review also provides an overview of the importance of establishing an osteogenic microniche using appropriately customized scaffolds and delineates some of the key challenges that still need to be overcome for adult stem cell skeletal regenerative therapy to become a clinical reality.

Age-related effects on the potency of human adipose-derived stem cells: creation and evaluation of superlots and implications for musculoskeletal tissue engineering applications

Human adipose-derived stem cells (hASC) are now a prevalent source of adult stem cells for studies in tissue engineering and regenerative medicine. However, researchers utilizing hASC in their investigations often encounter high levels of donor-to-donor variability in hASC differentiation potential. Because of this, conducting studies with this primary cell type can require extensive resources to generate statistically significant data. We present a method to generate pooled donor cell populations, termed "superlots," containing cell populations derived from four to five age-clustered donors. The goal of generating these superlots was to 1) increase experimental throughput, 2) to utilize assay resources more efficiently, and 3) to begin to establish global hASC differentiation behaviors that may be associated with donor age. With our superlot approach, we have validated that pooled donor cell populations exhibit proliferative activity representing the combined behavior of each individual donor cell line. Further, the superlots also exhibit differentiation levels roughly approximating the average combined differentiation levels of each individual donor cell line. We established that high donor-to-donor variability exists between the pre-, peri-, and postmenopausal age groupings and that proliferation and differentiation characteristics can vary widely, independent of age. Interestingly, we did observe that cell lines derived from postmenopausal donors demonstrated a relatively high proclivity for osteogenic differentiation and a relatively lowered proclivity for adipogenic differentiation as compared with cells derived from pre- and perimenopausal donors. In general, superlots effectively represented the average differentiation behavior of each of their contributing cell populations and could provide a powerful tool for increasing experimental throughput to more efficiently utilize resources when studying hASC differentiation.