1
|
Abstract
Polyanhydrides (PAs) are a class of synthetic biodegradable polymers employed as controlled drug delivery vehicles. They can be synthesized and scaled up from low-cost starting materials. The structure of PAs can be manipulated synthetically to meet desirable characteristics. PAs are biocompatible, biodegradable, and generate nontoxic metabolites upon degradation, which are easily eliminated from the body. The rate of water penetrating into the polyanhydride (PA) matrix is slower than the anhydride bond cleavage. This phenomenon sets PAs as "surface-eroding drug delivery carriers." Consequently, a variety of PA-based drug delivery carriers in the form of solid implants, pasty injectable formulations, microspheres, nanoparticles, etc. have been developed for the sustained release of small molecule drugs, and vaccines, peptide drugs, and nucleic acid-based active agents. The rate of drug delivery is often controlled by the polymer erosion rate, which is influenced by the polymer structure and composition, crystallinity, hydrophobicity, pH of the release medium, device size, configuration, etc. Owing to the above-mentioned interesting physicochemical and mechanical properties of PAs, the present review focuses on the advancements made in the domain of synthetic biodegradable biomedical PAs for therapeutic delivery applications. Various classes of PAs, their structures, their unique characteristics, their physicochemical and mechanical properties, and factors influencing surface erosion are discussed in detail. The review also summarizes various methods involved in the synthesis of PAs and their utility in the biomedical domain as drug, vaccine, and peptide delivery carriers in different formulations are reviewed.
Collapse
Affiliation(s)
- Pulikanti Guruprasad Reddy
- School of Pharmacy-Faculty of Medicine, The Hebrew University of Jerusalem, and Centre for Cannabis Research and the Institute of Drug Research, The Alex Grass Centre for Drug Design and Synthesis, Jerusalem 9112002, Israel
| | - Abraham J Domb
- School of Pharmacy-Faculty of Medicine, The Hebrew University of Jerusalem, and Centre for Cannabis Research and the Institute of Drug Research, The Alex Grass Centre for Drug Design and Synthesis, Jerusalem 9112002, Israel
| |
Collapse
|
2
|
Mueller E, Poulin I, Bodnaryk WJ, Hoare T. Click Chemistry Hydrogels for Extrusion Bioprinting: Progress, Challenges, and Opportunities. Biomacromolecules 2022; 23:619-640. [PMID: 34989569 DOI: 10.1021/acs.biomac.1c01105] [Citation(s) in RCA: 26] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
The emergence of 3D bioprinting has allowed a variety of hydrogel-based "bioinks" to be printed in the presence of cells to create precisely defined cell-loaded 3D scaffolds in a single step for advancing tissue engineering and/or regenerative medicine. While existing bioinks based primarily on ionic cross-linking, photo-cross-linking, or thermogelation have significantly advanced the field, they offer technical limitations in terms of the mechanics, degradation rates, and the cell viabilities achievable with the printed scaffolds, particularly in terms of aiming to match the wide range of mechanics and cellular microenvironments. Click chemistry offers an appealing solution to this challenge given that proper selection of the chemistry can enable precise tuning of both the gelation rate and the degradation rate, both key to successful tissue regeneration; simultaneously, the often bio-orthogonal nature of click chemistry is beneficial to maintain high cell viabilities within the scaffolds. However, to date, relatively few examples of 3D-printed click chemistry hydrogels have been reported, mostly due to the technical challenges of controlling mixing during the printing process to generate high-fidelity prints without clogging the printer. This review aims to showcase existing cross-linking modalities, characterize the advantages and disadvantages of different click chemistries reported, highlight current examples of click chemistry hydrogel bioinks, and discuss the design of mixing strategies to enable effective 3D extrusion bioprinting of click hydrogels.
Collapse
Affiliation(s)
- Eva Mueller
- Department of Chemical Engineering, McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L7, Canada
| | - Isabelle Poulin
- Department of Chemical Engineering, McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L7, Canada
| | - William James Bodnaryk
- Department of Chemical Engineering, McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L7, Canada
| | - Todd Hoare
- Department of Chemical Engineering, McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L7, Canada
| |
Collapse
|
3
|
Lüchow M, Fortuin L, Malkoch M. Modular, synthetic, thiol‐ene mediated hydrogel networks as potential scaffolds for
3D
cell cultures and tissue regeneration. JOURNAL OF POLYMER SCIENCE 2020. [DOI: 10.1002/pol.20200530] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Affiliation(s)
- Mads Lüchow
- Division of Coating Technology, Department of Fibre and Polymer Technology KTH Stockholm Sweden
| | - Lisa Fortuin
- Division of Coating Technology, Department of Fibre and Polymer Technology KTH Stockholm Sweden
| | - Michael Malkoch
- Division of Coating Technology, Department of Fibre and Polymer Technology KTH Stockholm Sweden
| |
Collapse
|
4
|
Snyder BL, Mohammed HS, Samways DSK, Shipp DA. Drug Delivery and Drug Efficacy from Amorphous Poly(thioether anhydrides). Macromol Biosci 2020; 20:e1900377. [PMID: 32207234 DOI: 10.1002/mabi.201900377] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/22/2019] [Revised: 03/09/2020] [Accepted: 03/10/2020] [Indexed: 01/14/2023]
Abstract
The correlation between erosion and drug (lidocaine and 6-mercaptopurine, 6-MP) release from amorphous poly(thioether anhydrides), which are synthesized using radical-mediated thiol-ene polymerization, is reported. Cytotoxicity studies of the polymer toward human fibroblast human dermal fibroblasts adult, melanoma A-375, and breast cancer MCF-7 cells are conducted, and drug efficacy of a cancer and autoimmune disease drug (6-MP) when released from the poly(thioether anhydrides) is examined against two cancerous cell types (A-375 and MCF-7). Erosion and drug release studies reveal that lidocaine release is governed by network erosion whereas 6-MP is released by a combination of erosion and diffusion. The cytotoxicity studies show that all three cell types demonstrate high viability, thus cytocompatibility, to poly(thioether anhydrides). Toxicity to the material is dose dependent and comparable to other polyanhydride systems. The 6-MP cancer drug is shown to remain bioactive after encapsulation in the poly(thioether anhydride) matrix and the polymer does not appear to modify the efficacy of the drug.
Collapse
Affiliation(s)
- Brittany L Snyder
- Department of Chemistry and Biomolecular Science, Clarkson University, Potsdam, NY, 13699-5810, USA
| | - Halimatu S Mohammed
- Department of Chemistry and Biomolecular Science, Clarkson University, Potsdam, NY, 13699-5810, USA
| | - Damien S K Samways
- Department of Biology, Clarkson University, Potsdam, NY, 13699-5805, USA
| | - Devon A Shipp
- Department of Chemistry and Biomolecular Science, Clarkson University, Potsdam, NY, 13699-5810, USA.,Center for Advanced Materials Processing, Clarkson University, Potsdam, NY, 13699-5810, USA
| |
Collapse
|
5
|
Tillman KR, Meacham R, Rolsma AN, Barankovich M, Witkowski AM, Mather PT, Graf T, Shipp DA. Dynamic covalent exchange in poly(thioether anhydrides). Polym Chem 2020. [DOI: 10.1039/d0py01267j] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Dynamic covalent exchange (DCE) of anhydride moieties is examined in both model compounds and network polymers.
Collapse
Affiliation(s)
- Kelly R. Tillman
- Department of Chemistry & Biomolecular Science
- Clarkson University
- Potsdam
- USA
| | - Rebecca Meacham
- Department of Chemistry & Biomolecular Science
- Clarkson University
- Potsdam
- USA
| | - Anne N. Rolsma
- Department of Chemistry & Biomolecular Science
- Clarkson University
- Potsdam
- USA
| | | | - Ana M. Witkowski
- Department of Chemistry & Biomolecular Science
- Clarkson University
- Potsdam
- USA
| | | | - Tyler Graf
- Department of Chemical Engineering
- Bucknell University
- Lewisburg
- USA
| | - Devon A. Shipp
- Department of Chemistry & Biomolecular Science
- Clarkson University
- Potsdam
- USA
| |
Collapse
|
6
|
Bhartia B, Puniredd SR, Jayaraman S, Gandhimathi C, Sharma M, Kuo YC, Chen CH, Reddy VJ, Troadec C, Srinivasan MP. Highly Stable Bonding of Thiol Monolayers to Hydrogen-Terminated Si via Supercritical Carbon Dioxide: Toward a Super Hydrophobic and Bioresistant Surface. ACS APPLIED MATERIALS & INTERFACES 2016; 8:24933-24945. [PMID: 27540859 DOI: 10.1021/acsami.6b06018] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
Oxide-free silicon chemistry has been widely studied using wet-chemistry methods, but for emerging applications such as molecular electronics on silicon, nanowire-based sensors, and biochips, these methods may not be suitable as they can give rise to defects due to surface contamination, residual solvents, which in turn can affect the grafted monolayer devices for practical applications. Therefore, there is a need for a cleaner, reproducible, scalable, and environmentally benign monolayer grafting process. In this work, monolayers of alkylthiols were deposited on oxide-free semiconductor surfaces using supercritical carbon dioxide (SCCO2) as a carrier fluid owing to its favorable physical properties. The identity of grafted monolayers was monitored with Fourier transform infrared (FTIR) spectroscopy, high-resolution X-ray photoelectron spectroscopy (HRXPS), XPS, atomic force microscopy (AFM), contact angle measurements, and ellipsometry. Monolayers on oxide-free silicon were able to passivate the surface for more than 50 days (10 times than the conventional methods) without any oxide formation in ambient atmosphere. Application of the SCCO2 process was further extended by depositing alkylthiol monolayers on fragile and brittle 1D silicon nanowires (SiNWs) and 2D germanium substrates. With the recent interest in SiNWs for biological applications, the thiol-passivated oxide-free silicon nanowire surfaces were also studied for their biological response. Alkylthiol-functionalized SiNWs showed a significant decrease in cell proliferation owing to their superhydrophobicity combined with the rough surface morphology. Furthermore, tribological studies showed a sharp decrease in the coefficient of friction, which was found to be dependent on the alkyl chain length and surface bond. These studies can be used for the development of cost-effective and highly stable monolayers for practical applications such as solar cells, biosensors, molecular electronics, micro- and nano- electromechanical systems, antifouling agents, and drug delivery.
Collapse
Affiliation(s)
- Bhavesh Bhartia
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research) , 2 Fusionopolis Way, Innovis, #08-32, Singapore 138634
- Department of Chemical and Biomolecular Engineering, National University of Singapore , 4 Engineering Drive 4, Singapore 117585
| | - Sreenivasa Reddy Puniredd
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research) , 2 Fusionopolis Way, Innovis, #08-32, Singapore 138634
| | - Sundaramurthy Jayaraman
- Environmental and Water Technology Centre of Innovation, Ngee Ann Polytechnic , 535 Clementi Road, Singapore 599489
| | - Chinnasamy Gandhimathi
- Centre for Nanofibers and Nanotechnology, Nanoscience and Nanotechnology Initiative, National University of Singapore , Singapore 117576
| | - Mohit Sharma
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research) , 2 Fusionopolis Way, Innovis, #08-32, Singapore 138634
| | - Yen-Chien Kuo
- National Synchrotron Radiation Research Center, Hsinchu 30076, Taiwan
| | - Chia-Hao Chen
- National Synchrotron Radiation Research Center, Hsinchu 30076, Taiwan
| | - Venugopal Jayarama Reddy
- Centre for Nanofibers and Nanotechnology, Nanoscience and Nanotechnology Initiative, National University of Singapore , Singapore 117576
| | - Cedric Troadec
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research) , 2 Fusionopolis Way, Innovis, #08-32, Singapore 138634
| | | |
Collapse
|