Biomaterial microarchitecture: a potent regulator of individual cell behavior and multicellular organization

Natural Hydrogels Support Kidney Organoid Generation and Promote In Vitro Angiogenesis

To date, strategies aiming to modulate cell to extracellular matrix (ECM) interactions during organoid derivation remain largely unexplored. Here renal decellularized ECM (dECM) hydrogels are fabricated from porcine and human renal cortex as biomaterials to enrich cell-to-ECM crosstalk during the onset of kidney organoid differentiation from human pluripotent stem cells (hPSCs). Renal dECM-derived hydrogels are used in combination with hPSC-derived renal progenitor cells to define new approaches for 2D and 3D kidney organoid differentiation, demonstrating that in the presence of these biomaterials the resulting kidney organoids exhibit renal differentiation features and the formation of an endogenous vascular component. Based on these observations, a new method to produce kidney organoids with vascular-like structures is achieved through the assembly of hPSC-derived endothelial-like organoids with kidney organoids in 3D. Major readouts of kidney differentiation and renal cell morphology are assessed exploiting these culture platforms as new models of nephrogenesis. Overall, this work shows that exploiting cell-to-ECM interactions during the onset of kidney differentiation from hPSCs facilitates and optimizes current approaches for kidney organoid derivation thereby increasing the utility of these unique cell culture platforms for personalized medicine.

Transducing compressive forces into cellular outputs in cancer and beyond

In living organisms, cells sense mechanical forces (shearing, tensile, and compressive) and respond to those physical cues through a process called mechanotransduction. This process includes the simultaneous activation of biochemical signaling pathways. Recent studies mostly on human cells revealed that compressive forces selectively modulate a wide range of cell behavior, both in compressed and in neighboring less compressed cells. Besides participating in tissue homeostasis such as bone healing, compression is also involved in pathologies, including intervertebral disc degeneration or solid cancers. In this review, we will summarize the current scattered knowledge of compression-induced cell signaling pathways and their subsequent cellular outputs, both in physiological and pathological conditions, such as solid cancers.

Functional hydrogels for the repair and regeneration of tissue defects

Tissue defects can be accompanied by functional impairments that affect the health and quality of life of patients. Hydrogels are three-dimensional (3D) hydrophilic polymer networks that can be used as bionic functional tissues to fill or repair damaged tissue as a promising therapeutic strategy in the field of tissue engineering and regenerative medicine. This paper summarises and discusses four outstanding advantages of hydrogels and their applications and advances in the repair and regeneration of tissue defects. First, hydrogels have physicochemical properties similar to the extracellular matrix of natural tissues, providing a good microenvironment for cell proliferation, migration and differentiation. Second, hydrogels have excellent shape adaptation and tissue adhesion properties, allowing them to be applied to a wide range of irregularly shaped tissue defects and to adhere well to the defect for sustained and efficient repair function. Third, the hydrogel is an intelligent delivery system capable of releasing therapeutic agents on demand. Hydrogels are capable of delivering therapeutic reagents and releasing therapeutic substances with temporal and spatial precision depending on the site and state of the defect. Fourth, hydrogels are self-healing and can maintain their integrity when damaged. We then describe the application and research progress of functional hydrogels in the repair and regeneration of defects in bone, cartilage, skin, muscle and nerve tissues. Finally, we discuss the challenges faced by hydrogels in the field of tissue regeneration and provide an outlook on their future trends.

3D bioprinted autologous bone particle scaffolds for cranioplasty promote bone regeneration with both implanted and native BMSCs

Although autologous bone (AB) grafting is considered to be the gold standard for cranioplasty, unresolved problems remain, such as surgical-site infections and bone flap absorption. In this study, an AB scaffold was constructed via three-dimensional (3D) bedside-bioprinting technology and used for cranioplasty. To simulate the skull structure, a polycaprolactone shell was designed as an external lamina, and 3D-printed AB and a bone marrow-derived mesenchymal stem cell (BMSC) hydrogel was used to mimic cancellous bone for bone regeneration. Ourin vitroresults showed that the scaffold exhibited excellent cellular affinity and promoted osteogenic differentiation of BMSCs in both two-dimensional and 3D culture systems. The scaffold was implanted in beagle dog cranial defects for up to 9 months, and the scaffold promoted new bone and osteoid formation. Furtherin vivostudies indicated that transplanted BMSCs differentiated into vascular endothelium, cartilage, and bone tissues, whereas native BMSCs were recruited into the defect. The results of this study provide a method for bedside bioprinting of a cranioplasty scaffold for bone regeneration, which opens up another window for clinical applications of 3D printing in the future.

Click chemistry functionalization of self-assembling peptide hydrogels

Self-assembling peptide (SAP) hydrogels provide a fibrous microenvironment to cells while also giving users control of biochemical and mechanical cues. Previously, biochemical cues were introduced by physically mixing them with SAPs prior to hydrogel assembly, or by incorporating them into the SAP sequence during peptide synthesis, which limited flexibility and increased costs. To circumvent these limitations, we developed "Click SAPs," a novel formulation that can be easily functionalized via click chemistry thiol-ene reaction. Due to its high cytocompatibility, the thiol-ene click reaction is currently used to crosslink and functionalize other types of polymeric hydrogels. In this study, we developed a click chemistry compatible SAP platform by addition of a modified lysine (lysine-alloc) to the SAP sequence, enabling effective coupling of thiol-containing molecules to the SAP hydrogel network. We demonstrate the flexibility of this approach by incorporating a fluorescent dye, a cellular adhesion peptide, and a matrix metalloproteinase-sensitive biosensor using the thiol-ene reaction in 3D Click SAPs. Using atomic force microscopy, we demonstrate that Click SAPs retain the ability to self-assemble into fibers, similar to previous systems. Additionally, a range of physiologically relevant stiffnesses can be achieved by adjusting SAP concentration. Encapsulated cells maintain high viability in Click SAPs and can interact with adhesion peptides and a matrix metalloproteinase biosensor, demonstrating that incorporated molecules retain their biological activity. The Click SAP platform supports easier functionalization with a wider array of bioactive molecules and enables new investigations with temporal and spatial control of the cellular microenvironment.

Calcium-to-phosphorus releasing ratio affects osteoinductivity and osteoconductivity of calcium phosphate bioceramics in bone tissue engineering

Calcium phosphate (Ca-P) bioceramics, including hydroxyapatite (HA), biphasic calcium phosphate (BCP), and beta-tricalcium phosphate (β-TCP), have been widely used in bone reconstruction. Many studies have focused on the osteoconductivity or osteoinductivity of Ca-P bioceramics, but the association between osteoconductivity and osteoinductivity is not well understood. In our study, the osteoconductivity of HA, BCP, and β-TCP was investigated based on the osteoblastic differentiation in vitro and in situ as well as calvarial defect repair in vivo, and osteoinductivity was evaluated by using pluripotent mesenchymal stem cells (MSCs) in vitro and heterotopic ossification in muscles in vivo. Our results showed that the cell viability, alkaline phosphatase activity, and expression of osteogenesis-related genes, including osteocalcin (Ocn), bone sialoprotein (Bsp), alpha-1 type I collagen (Col1a1), and runt-related transcription factor 2 (Runx2), of osteoblasts each ranked as BCP > β-TCP > HA, but the alkaline phosphatase activity and expression of osteogenic differentiation genes of MSCs each ranked as β-TCP > BCP > HA. Calvarial defect implantation of Ca-P bioceramics ranked as BCP > β-TCP ≥ HA, but intramuscular implantation ranked as β-TCP ≥ BCP > HA in vivo. Further investigation indicated that osteoconductivity and osteoinductivity are affected by the Ca/P ratio surrounding the Ca-P bioceramics. Thus, manipulating the appropriate calcium-to-phosphorus releasing ratio is a critical factor for determining the osteoinductivity of Ca-P bioceramics in bone tissue engineering.

Hydrogels for Salivary Gland Tissue Engineering

Mimicking the complex architecture of salivary glands (SGs) outside their native niche is challenging due their multicellular and highly branched organization. However, significant progress has been made to recapitulate the gland structure and function using several in vitro and ex vivo models. Hydrogels are polymers with the potential to retain a large volume of water inside their three-dimensional structure, thus simulating extracellular matrix properties that are essential for the cell and tissue integrity. Hydrogel-based culture of SG cells has seen a tremendous success in terms of developing platforms for cell expansion, building an artificial gland, and for use in transplantation to rescue loss of SG function. Both natural and synthetic hydrogels have been used widely in SG tissue engineering applications owing to their properties that support the proliferation, reorganization, and polarization of SG epithelial cells. While recent improvements in hydrogel properties are essential to establish more sophisticated models, the emphasis should still be made towards supporting factors such as mechanotransduction and associated signaling cues. In this concise review, we discuss considerations of an ideal hydrogel-based biomaterial for SG engineering and their associated signaling pathways. We also discuss the current advances made in natural and synthetic hydrogels for SG tissue engineering applications.

In Vivo Comparison of Synthetic Macroporous Filamentous and Sponge-like Skin Substitute Matrices Reveals Morphometric Features of the Foreign Body Reaction According to 3D Biomaterial Designs

Synthetic macroporous biomaterials are widely used in the field of skin tissue engineering to mimic membrane functions of the native dermis. Biomaterial designs can be subclassified with respect to their shape in fibrous designs, namely fibers, meshes or fleeces, respectively, and porous designs, such as sponges and foams. However, synthetic matrices often have limitations regarding unfavorable foreign body responses (FBRs). Severe FBRs can result in unfavorable disintegration and rejection of an implant, whereas mild FBRs can lead to an acceptable integration of a biomaterial. In this context, comparative in vivo studies of different three-dimensional (3D) matrix designs are rare. Especially, the differences regarding FBRs between synthetically derived filamentous fleeces and sponge-like constructs are unknown. In the present study, the FBRs on two 3D matrix designs were explored after 25 days of subcutaneous implantation in a porcine model. Cellular reactions were quantified histopathologically to investigate in which way the FBR is influenced by the biomaterial architecture. Our results show that FBR metrics (polymorph-nucleated cells and fibrotic reactions) were significantly affected according to the matrix designs. Our findings contribute to a better understanding of the 3D matrix tissue interactions and can be useful for future developments of synthetically derived skin substitute biomaterials.

Advancing Engineered Heart Muscle Tissue Complexity with Hydrogel Composites

A heart attack results in the permanent loss of heart muscle and can lead to heart disease, which kills more than 7 million people worldwide each year. To date, outside of heart transplantation, current clinical treatments cannot regenerate lost heart muscle or restore full function to the damaged heart. There is a critical need to create engineered heart tissues with structural complexity and functional capacity needed to replace damaged heart muscle. The inextricable link between structure and function suggests that hydrogel composites hold tremendous promise as a biomaterial-guided strategy to advance heart muscle tissue engineering. Such composites provide biophysical cues and functionality as a provisional extracellular matrix that hydrogels cannot on their own. This review describes the latest advances in the characterization of these biomaterial systems and using them for heart muscle tissue engineering. The review integrates results across the field to provide new insights on critical features within hydrogel composites and perspectives on the next steps to harnessing these promising biomaterials to faithfully reproduce the complex structure and function of native heart muscle.

Cell-matrix reciprocity in 3D culture models with nonlinear elasticity

Three-dimensional (3D) matrix models using hydrogels are powerful tools to understand and predict cell behavior. The interactions between the cell and its matrix, however is highly complex: the matrix has a profound effect on basic cell functions but simultaneously, cells are able to actively manipulate the matrix properties. This (mechano)reciprocity between cells and the extracellular matrix (ECM) is central in regulating tissue functions and it is fundamentally important to broadly consider the biomechanical properties of the in vivo ECM when designing in vitro matrix models. This manuscript discusses two commonly used biopolymer networks, i.e. collagen and fibrin gels, and one synthetic polymer network, polyisocyanide gel (PIC), which all possess the characteristic nonlinear mechanics in the biological stress regime. We start from the structure of the materials, then address the uses, advantages, and limitations of each material, to provide a guideline for tissue engineers and biophysicists in utilizing current materials and also designing new materials for 3D cell culture purposes.

Current hydrogel advances in physicochemical and biological response-driven biomedical application diversity

Hydrogel is a type of versatile platform with various biomedical applications after rational structure and functional design that leverages on material engineering to modulate its physicochemical properties (e.g., stiffness, pore size, viscoelasticity, microarchitecture, degradability, ligand presentation, stimulus-responsive properties, etc.) and influence cell signaling cascades and fate. In the past few decades, a plethora of pioneering studies have been implemented to explore the cell-hydrogel matrix interactions and figure out the underlying mechanisms, paving the way to the lab-to-clinic translation of hydrogel-based therapies. In this review, we first introduced the physicochemical properties of hydrogels and their fabrication approaches concisely. Subsequently, the comprehensive description and deep discussion were elucidated, wherein the influences of different hydrogels properties on cell behaviors and cellular signaling events were highlighted. These behaviors or events included integrin clustering, focal adhesion (FA) complex accumulation and activation, cytoskeleton rearrangement, protein cyto-nuclei shuttling and activation (e.g., Yes-associated protein (YAP), catenin, etc.), cellular compartment reorganization, gene expression, and further cell biology modulation (e.g., spreading, migration, proliferation, lineage commitment, etc.). Based on them, current in vitro and in vivo hydrogel applications that mainly covered diseases models, various cell delivery protocols for tissue regeneration and disease therapy, smart drug carrier, bioimaging, biosensor, and conductive wearable/implantable biodevices, etc. were further summarized and discussed. More significantly, the clinical translation potential and trials of hydrogels were presented, accompanied with which the remaining challenges and future perspectives in this field were emphasized. Collectively, the comprehensive and deep insights in this review will shed light on the design principles of new biomedical hydrogels to understand and modulate cellular processes, which are available for providing significant indications for future hydrogel design and serving for a broad range of biomedical applications.

The effect of modifying the nanostructure of gelatin fiber scaffolds on early angiogenesisin vitroandin vivo

Early angiogenesis is one of the key challenges in tissue regeneration. Crosslinking mode and fiber diameter are critical factors to affect the adhesion and proliferation of cells. However, whether and how these two factors affect early angiogenesis remain largely unknown. To address the issue, the optimal crosslinking mode and fiber diameter of gelatin fiber membrane for early angiogenesisin vivoandin vitrowere explored in this work. Compared with the post crosslinked gelatin fiber membrane with the same fiber diameter, the 700 nm diameterin situcrosslinked gelatin fiber membrane was found to have smaller roughness (230.67 ± 19 nm) and stronger hydrophilicity (54.77° ± 1.2°), which were suitable for cell growth and adhesion. Moreover, thein situcrosslinked gelatin fiber membrane with a fiber diameter of 1000 nm had significant advantages in early angiogenesis over the two with fiber diameters of 500 and 700 nm by up-regulating the expression of Ang1, VEGF, and integrin-β1. Our findings indicated that thein situcrosslinked gelatin fiber membrane with a diameter of 1000 nm might solve the problem of insufficient blood supply in the early stage of soft tissue regeneration and has broad clinical application prospects in promoting tissue regeneration.

Fabrication of MSC-laden composites of hyaluronic acid hydrogels reinforced with MEW scaffolds for cartilage repair

Hydrogels are of interest in cartilage tissue engineering due to their ability to support the encapsulation and chondrogenesis of mesenchymal stromal cells (MSCs). However, features such as hydrogel crosslink density, which can influence nutrient transport, nascent matrix distribution, and the stability of constructs during and after implantation must be considered in hydrogel design. Here, we first demonstrate that more loosely crosslinked (i.e. softer, ∼2 kPa) norbornene-modified hyaluronic acid (NorHA) hydrogels support enhanced cartilage formation and maturation when compared to more densely crosslinked (i.e. stiffer, ∼6-60 kPa) hydrogels, with a >100-fold increase in compressive modulus after 56 d of culture. While soft NorHA hydrogels mature into neocartilage suitable for the repair of articular cartilage, their initial moduli are too low for handling and they do not exhibit the requisite stability needed to withstand the loading environments of articulating joints. To address this, we reinforced NorHA hydrogels with polycaprolactone (PCL) microfibers produced via melt-electrowriting (MEW). Importantly, composites fabricated with MEW meshes of 400µm spacing increased the moduli of soft NorHA hydrogels by ∼50-fold while preserving the chondrogenic potential of the hydrogels. There were minimal differences in chondrogenic gene expression and biochemical content (e.g. DNA, GAG, collagen) between hydrogels alone and composites, whereas the composites increased in compressive modulus to ∼350 kPa after 56 d of culture. Lastly, integration of composites with native tissue was assessedex vivo; MSC-laden composites implanted after 28 d of pre-culture exhibited increased integration strengths and contact areas compared to acellular composites. This approach has great potential towards the design of cell-laden implants that possess both initial mechanical integrity and the ability to support neocartilage formation and integration for cartilage repair.

A Highly Ordered, Nanostructured Fluorinated CaP-Coated Melt Electrowritten Scaffold for Periodontal Tissue Regeneration

Periodontitis is a chronic inflammatory, bacteria-triggered disorder affecting nearly half of American adults. Although some level of tissue regeneration is realized, its low success in complex cases demands superior strategies to amplify regenerative capacity. Herein, highly ordered scaffolds are engineered via Melt ElectroWriting (MEW), and the effects of strand spacing, as well as the presence of a nanostructured fluorinated calcium phosphate (F/CaP) coating on the adhesion/proliferation, and osteogenic differentiation of human-derived periodontal ligament stem cells, are investigated. Upon initial cell-scaffold interaction screening aimed at defining the most suitable design, MEW poly(ε-caprolactone) scaffolds with 500 µm strand spacing are chosen. Following an alkali treatment, scaffolds are immersed in a pre-established solution to allow for coating formation. The presence of a nanostructured F/CaP coating leads to a marked upregulation of osteogenic genes and attenuated bacterial growth. In vivo findings confirm that the F/CaP-coated scaffolds are biocompatible and lead to periodontal regeneration when implanted in a rat mandibular periodontal fenestration defect model. In aggregate, it is considered that this work can contribute to the development of personalized scaffolds capable of enabling tissue-specific differentiation of progenitor cells, and thus guide simultaneous and coordinated regeneration of soft and hard periodontal tissues, while providing antimicrobial protection.

Endothelial Cell Migration Regulated by Surface Topography of Poly(ε-caprolactone) Nanofibers

The study of cell migration on biomaterials is of great significance in tissue engineering and regenerative medicine. In recent years, there has been increasing evidence that the physical properties of the extracellular matrix (ECM), such as surface topography, affect various cellular behaviors such as proliferation, adhesion, and migration. However, the biological mechanism of surface topography influencing cellular behavior is still unclear. In this study, we prepared polycaprolactone (PCL) fibrous materials with different surface microstructures by solvent casting, electrospinning, and self-induced crystallization. The corresponding topographical structure obtained is a two-dimensional (2D) flat surface, 2.5-dimensional (2.5D) fibers, and three-dimensional (3D) fibers with a multilevel microstructure. We then investigated the effects of the complex topographical structure on endothelial cell migration. Our study demonstrates that cells can sense the changes of micro- and nanomorphology on the surface of materials, adapt to the physical environment through biochemical reactions, and regulate actin polymerization and directional migration through Rac1 and Cdc42. The cells on the nanofibers are elongated spindles, and the positive feedback of cell adhesion and actin polymerization along the fiber direction makes the plasma membrane continue to protrude, promoting cell polarization and directional migration. This study might provide new insights into the biomaterial design, especially those used for artificial vascular grafts.

A 3D physio-mimetic interpenetrating network-based platform to decode the pro and anti-tumorigenic properties of cancer-associated fibroblasts

Three-dimensional (3D) biomaterials with physiologically relevant and experimentally tractable biomechanical features are important platforms to advance our understanding of the influence of tissue mechanics in disease progression. Herein, an interpenetrating network (IPN) of collagen and alginate 3D culture system with tunable extracellular microstructure and mechanics is exploited as a tumor stroma proxy to study phenotypic plasticity of colorectal cancer-associated fibroblasts (CAF). In combination with Next Generation Sequencing (NGS) data analysis, we demonstrated that tuning the storage modulus of the IPN hydrogel between 49 and 419 Pa can trigger a reversible switch between an inflammatory (i-state, α-SMA^lowIL-6^high) and myofibroblastic (m-state, α-SMA^highIL-6^low) state in CAF that is dependent on the polymer network confinement effect and ROS-HIF1-α mechanotransduction signaling axis. Secretome from m-state CAF upregulated several epithelial-mesenchymal-transition (EMT) transcripts and induced robust scattering in DLD-1, HCT116, and SW480 human colorectal adenocarcinoma, while the EMT-inducing capacity is muted in i-state CAF, suggestive of an anti-tumorigenic role. Our findings were further validated through Gene Expression Profiling Interactive Analysis (GEPIA), which showed that cytokines secreted at higher levels by i-state CAF are correlated (p < 0.05) with good overall colorectal cancer patient survival. Therefore, 3D network density and spatial cellular confinement are critical biophysical determinants that can profoundly influence CAF states, paracrine signaling, and EMT-inducing potential. STATEMENT OF SIGNIFICANCE: The communication between cancer cells and cancer-associated fibroblasts (CAF) contributes to tumor metastasis. CAF represent a diverse population of cellular subsets that can either promote or restrain tumor progression. However, the origin and cause of CAF heterogeneity remain elusive, limiting CAF-directed therapies for clinical use. We studied the dynamic phenotypes of CAF using a 3D physio-mimetic culture platform consisting of an interpenetrating collagen-alginate network. Combined with transcriptomic stratification and correlative analysis using cancer patient dataset, we showed phenotypic interconversion between inflammatory and myofibroblastic states, with anti- and pro-tumorigenic functions, in human colorectal CAF. This multidisciplinary study reveals the functional diversity of colorectal CAF caused by biophysical cues. The finding will influence the development of new CAF biomarkers and cancer therapies.

A new cell-sized support for 3D cell cultures based on recombinant spider silk fibers

It is now generally accepted that 2D cultures cannot accurately replicate the rich environment and complex tissue architecture that exists in vivo, and that classically cultured cells tend to lose their original function. Growth of spheroids as opposed to 2D cultures on plastic has now been hailed as an efficient method to produce quantities of high-quality cells for cancer research, drug discovery, neuroscience, and regenerative medicine. We have developed a new recombinant protein that mimics dragline spidersilk and that self-assembles into cell-sized coils. These have high thermal and shelf-life stability and can be readily sterilized and stored for an extended period of time. The fibers are flexible, elastic, and biocompatible and can serve as cell-sized scaffold for the formation of 3D cell spheroids. As a proof of concept, recombinant spidersilk was integrated as a scaffold in spheroids of three cell types: primary rat hepatocytes, human mesenchymal stem cells, and mouse L929 cells. The scaffolds significantly reduced spheroid shrinkage and unlike scaffold-free spheroids, spheroids did not disintegrate over the course of long-term culture. Cells in recombinant spidersilk spheroids showed increased viability, and the cell lines continued to proliferate for longer than control cultures without spidersilk. The spidersilk also supported biological functions. Recombinant spidersilk primary hepatocyte spheroids exhibited 2.7-fold higher levels of adenosine triphosphate (ATP) continued to express and secrete albumin and exhibited significantly higher basal and induced CYP3A activity for at least 6 weeks in culture, while control spheroids without fibers stopped producing albumin after 27 days and CPY3A activity was barely detectable after 44 days. These results indicate that recombinant spidersilk can serve as a useful tool for long-term cell culture of 3D cell spheroids and specifically that primary hepatocytes can remain active in culture for an extended period of time which could be of great use in toxicology testing.

Semiautomated quantification of the fibrous tissue response to complex three-dimensional filamentous scaffolds using digital image analysis

Fibrosis represents a relevant response to the implantation of biomaterials, which occurs not only at the tissue-material interface (fibrotic encapsulation) but also within the void fraction of complex three-dimensional (3D) biomaterial constructions (fibrotic ingrowth). Usual evaluation of the biocompatibility mostly depicts fibrosis at the interface of the biomaterial using semiquantitative scores. Here, the relations between encapsulation and infiltrating fibrotic growth are poorly represented. Virtual pathology and digital image analysis provide new strategies to assess fibrosis in a more differentiated way. In this study, we adopted a method previously used to quantify fibrosis in visceral organs to the quantification of fibrosis to 3D biomaterials. In a proof-of-concept study, we transferred the "Collagen Proportionate Area" (CPA) analysis from hepatology to the field of biomaterials. As one task of an experimental animal study, we used CPA analysis to quantify the fibrotic ingrowth into a filamentous scaffold after subcutaneous implantation. We were able to demonstrate that the application of the CPA analysis is well suited as an additional fibrosis evaluation strategy for new biomaterial constructions. The CPA method can contribute to a better understanding of the fibrotic interactions between 3D scaffolds and the host tissue responses.

Fibrous Demineralized Bone Matrix (DBM) Improves Bone Marrow Mononuclear Cell (BMC)-Supported Bone Healing in Large Femoral Bone Defects in Rats

Regeneration of large bone defects is a major objective in trauma surgery. Bone marrow mononuclear cell (BMC)-supported bone healing was shown to be efficient after immobilization on a scaffold. We hypothesized that fibrous demineralized bone matrix (DBM) in various forms with BMCs is superior to granular DBM. A total of 65 male SD rats were assigned to five treatment groups: syngenic cancellous bone (SCB), fibrous demineralized bone matrix (f-DBM), fibrous demineralized bone matrix densely packed (f-DBM 120%), DBM granules (GDBM) and DBM granules 5% calcium phosphate (GDBM5%Ca2+). BMCs from donor rats were combined with different scaffolds and placed into 5 mm femoral bone defects. After 8 weeks, bone mineral density (BMD), biomechanical stability and histology were assessed. Similar biomechanical properties of f-DBM and SCB defects were observed. Similar bone and cartilage formation was found in all groups, but a significantly bigger residual defect size was found in GDBM. High bone healing scores were found in f-DBM (25) and SCB (25). The application of DBM in fiber form combined with the application of BMCs shows promising results comparable to the gold standard, syngenic cancellous bone. Denser packing of fibers or higher amount of calcium phosphate has no positive effect.

Growth of tumor emboli within a vessel model reveals dependence on the magnitude of mechanical constraint

Tumor emboli-aggregates of tumor cells within vessels-pose a clinical challenge as they are associated with increased metastasis and tumor recurrence. When growing within a vessel, tumor emboli are subject to a unique mechanical constraint provided by the tubular geometry of the vessel. Current models of tumor emboli use unconstrained multicellular tumor spheroids, which neglect this mechanical interplay. Here, we modeled a lymphatic vessel as a 200 μm-diameter channel in either a stiff or soft, bioinert agarose matrix to create a vessel-like constraint model (VLCM), and we modeled colon or breast cancer tumor emboli with aggregates of HCT116 or SUM149PT cells, respectively. The stiff matrix VLCM constrained the tumor emboli to the cylindrical channel, which led to continuous growth of the emboli, in contrast to the growth rate reduction that unconstrained spheroids exhibit. Emboli morphology in the soft matrix VLCM, however, was dependent on the magnitude of mechanical mismatch between the matrix and the cell aggregates. In general, when the elastic modulus of the matrix of the VLCM was greater than the emboli (EVLCM/Eemb > 1), the emboli were constrained to grow within the channel, and when the elastic modulus of the matrix was less than the emboli (0 < EVLCM/Eemb < 1), the emboli bulged into the matrix. Due to a large difference in myosin II expression between the cell lines, we hypothesized that tumor cell aggregate stiffness is an indicator of cellular force-generating capability. Inhibitors of myosin-related force generation decreased the elastic modulus and/or increased the stress relaxation of the tumor cell aggregates, effectively increasing the mechanical mismatch. The increased mechanical mismatch after drug treatment was correlated with increased confinement of tumor emboli growth along the channel, which may translate to increased tumor burden due to the increased tumor volume within the diffusion distance of nutrients and oxygen.

Development of a New Bone-Mimetic Surface Treatment Platform: Nanoneedle Hydroxyapatite (nnHA) Coating

The hierarchical structure of bone plays pivotal roles in driving cell behavior and tissue regeneration and must be considered when designing materials for orthopedic applications. Herein, it is aimed to recapitulate the native bone environment by using melt electrowriting to fabricate fibrous microarchitectures which are modified with plate-shaped (pHA) or novel nanoneedle-shaped (nnHA) crystals. Nuclear magnetic resonance spectroscopy, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction demonstrate that these coatings replicate the nanostructure and composition of native bone. Human mesenchymal stem/stromal cell (MSC) mineralization is significantly increased fivefold with pHA scaffolds and 14-fold with nnHA scaffolds. Given the protein stabilizing properties of mineral, these materials are further functionalized with bone morphogenetic protein 2 (BMP2). nnHA treatment facilitates controlled release of BMP2 which further enhance MSC mineral deposition. Finally, the versatility of this nnHA treatment method, which may be used to coat different architectures/materials including fused deposition modeling (FDM) scaffolds and Ti6Al4V titanium, is demonstrated. This study thus outlines a method for fabricating scaffolds with precise fibrous microarchitectures and bone-mimetic nnHA extrafibrillar coatings which significantly enhance MSC osteogenesis and therapeutic protein delivery, and leverages these results to show how this surface treatment method may be applied to a wider field for multiple orthopedic applications.

Lilypad aggregation: localised self-assembly and metal sequestration at a liquid-vapour interface

Spatially resolved soft materials, such as vesicles and microgels, have shown promise as selective adsorbents and microscale reaction vessels. However, spatiotemporal control of aggregation can be difficult to achieve. In this study, nickel(ii) chloride and a dipyridyl oligo(urea) ligand were combined in a vapour-diffusion setup to produce a localised spheroidal aggregate at the liquid-vapour interface. This aggregate forms via the self-assembly and fusion of monodisperse colloids and grows until its weight is no longer counterbalanced by surface tension. A simple physical model reveals that this process, termed lilypad aggregation, is possible only for surface energies that favour neither bulk aggregation nor the growth of an interfacial film. These surface energies dictate the final size and shape of the aggregate and may be estimated through visual monitoring of its changing morphology. Lilypad aggregates sequester metal from the surrounding sol and can be collected manually from the surface of the liquid.

Membrane dynamics in cell migration

Migration of cells is required in multiple tissue-level processes, such as in inflammation or cancer metastasis. Endocytosis is an extremely regulated cellular process by which cells uptake extracellular molecules or internalise cell surface receptors. While the role of endocytosis of focal adhesions (FA) and plasma membrane (PM) turnover at the leading edge of migratory cells is wide known, the contribution of endocytic proteins per se in migration has been frequently disregarded. In this review, we describe the novel functions of the most well-known endocytic proteins in cancer cell migration, focusing on clathrin, caveolin, flotillins and GRAF1. In addition, we highlight the relevance of the macropinocytic pathway in amoeboid-like cell migration.

Rapid fabrication of collagen bundles mimicking tumor-associated collagen architectures

Stromal collagen is upregulated surrounding a solid tumor and presents as dense, thick, linearized, and aligned bundles. The collagen bundles are continually remodeled during tumor progression, and their orientation with respect to the tumor boundary has been correlated with invasive state. Currently, reconstituted-collagen gels are the standard in vitro tumor cell-extracellular matrix interaction model. The reticular, dense, and isotropic nanofiber (~900 nm-diameter, on average) gels do not, however, recapitulate the in vivo structural features of collagen bundling and alignment. Here, we present a rapid and simple method to fabricate bundles of collagen type I, whose average thickness may be varied between about 4 μm and 9 μm dependent upon diluent temperature and ionic strength. The durability and versatility of the collagen bundles was demonstrated with their incorporation into two in vitro models where the thickness and alignment of the collagen bundles resembled various in vivo arrangements. First, collagen bundles aligned by a microfluidic device elicited cancer cell contact guidance and enhanced their directional migration. Second, the presence of the collagen bundles in a bio-inert agarose hydrogel was shown to provide a route for cancer cell outgrowth. The unique structural features of the collagen bundles advance the physiological relevance of in vitro collagen-based tumor models for accurately capturing tumor cell-extracellular matrix interactions. STATEMENT OF SIGNIFICANCE: Collagen in the tumor microenvironment is upregulated and remodeled into dense, thick, and aligned bundles that are associated with invasive state. Current collagen-based in vitro models are based on reticular, isotropic nanofiber gels that do not fully recapitulate in vivo tumor stromal collagen. We present a simple and robust method of rapidly fabricating cell-scale collagen bundles that better mimic the remodeled collagen surrounding a tumor. Interacting with the bundles, cancer cells exhibited drastically different phenotypic behaviors, compared to nanofiber scaffolds. This work reveals the importance of microscale architecture of in vitro tumor models. The collagen bundles provide physiologically relevant collagen morphologies that may be easily incorporated into existing models of tumor cell-extracellular matrix interactions.

Specific angiogenic peptide binding with injectable cardiac ECM collagen gel promotes the recovery of myocardial infarction in rat

Restoring blood supply is an effective way for the therapy of myocardial infarction (MI). It was reported a specific angiogenic peptide (VMP) derived from vascular endothelial growth factor (VEGF) could activate its receptor to mimic the biological activity of VEGF. In this study, in order to improve the local concentration in infarction region, a collagen-binding domain was synthesized with VMP to construct collagen binding domain (CBD)-VMP peptides. The fused CBD-VMP could bind specifically to collagen which was rich in cardiac extracellular matrix (c-ECM), without impacting the biological activity of VMP peptides. When the CBD-VMP peptides loaded on collagen scaffold and implanted into the rats subcutaneously, significant vascularization was observed. Then, CBD-VMP peptides binding with injectable c-ECM injected into the MI rat by intramuscular administration, significant blood vessels regeneration, and decrease of cell apoptosis were observed, that corelated with the recovery of cardiac function. It might be an alternative promising strategy for the clinical application of MI.

The Implication of Spatial Statistics in Human Mesenchymal Stem Cell Response to Nanotubular Architectures

INTRODUCTION

In recent years there has been ample interest in nanoscale modifications of synthetic biomaterials to understand fundamental aspects of cell-surface interactions towards improved biological outcomes. In this study, we aimed at closing in on the effects of nanotubular TiO2 surfaces with variable nanotopography on the response on human mesenchymal stem cells (hMSCs). Although the influence of TiO2 nanotubes on the cellular response, and in particular on hMSC activity, has already been addressed in the past, previous studies overlooked critical morphological, structural and physical aspects that go beyond the simple nanotube diameter, such as spatial statistics.

METHODS

To bridge this gap, we implemented an extensive characterization of nanotubular surfaces generated by anodization of titanium with a focus on spatial structural variables including eccentricity, nearest neighbour distance (NND) and Voronoi entropy, and associated them to the hMSC response. In addition, we assessed the biological potential of a two-tiered honeycomb nanoarchitecture, which allowed the detection of combinatory effects that this hierarchical structure has on stem cells with respect to conventional nanotubular designs. We have combined experimental techniques, ranging from Scanning Electron (SEM) and Atomic Force (AFM) microscopy to Raman spectroscopy, with computational simulations to characterize and model nanotubular surfaces. We evaluated the cell response at 6 hrs, 1 and 2 days by fluorescence microscopy, as well as bone mineral deposition by Raman spectroscopy, demonstrating substrate-induced differential biological cueing at both the short- and long-term.

RESULTS

Our work demonstrates that the nanotube diameter is not sufficient to comprehensively characterize nanotubular surfaces and equally important parameters, such as eccentricity and wall thickness, ought to be included since they all contribute to the overall spatial disorder which, in turn, dictates the overall bioactive potential. We have also demonstrated that nanotubular surfaces affect the quality of bone mineral deposited by differentiated stem cells. Lastly, we closed in on the integrated effects exerted by the superimposition of two dissimilar nanotubular arrays in the honeycomb architecture.

DISCUSSION

This work delineates a novel approach for the characterization of TiO2 nanotubes which supports the incorporation of critical spatial structural aspects that have been overlooked in previous research. This is a crucial aspect to interpret cellular behaviour on nanotubular substrates. Consequently, we anticipate that this strategy will contribute to the unification of studies focused on the use of such powerful nanostructured surfaces not only for biomedical applications but also in other technology fields, such as catalysis.

The effect of three-dimensional cultured adipose tissue-derived mesenchymal stem cell–conditioned medium and the antiaging effect of cosmetic products containing the medium

Background

Recently, investigators have been trying to apply the by-products as well as stem cells themselves to various fields such as pharmaceuticals, medical devices, quasi-drug, cosmetis, etc. We aimed to comfirm the anti-senescence effect of 3D cultured adipose tissue-derived mesenchymal stem cell–conditioned medium (3D cultured ADMSCs-CM) and develop them as cosmetic raw materials for anti-aging purposes.

Methods

We investigated the effect of 3D cultured ADMSCs-CM on collagen production and performed efficacy tests to evaluate the effect of a cream-based cosmetic product containing the medium using various methods, such as dermal density, skin moisture retention, and so on.

Results

Analysis of the effect of ADMSCs-CM on skin regeneration and production of collagen showed 1.5-fold (2D cultured ADMSCs-CM) and 2.5-fold (3D cultured ADMSCs-CM) increase in expressions of procollagen and 4-fold (2D cultured ADMSCs-CM) and 5-fold (3D cultured ADMSCs-CM) increase in the expression of collagen compared with control. In addition, related gene expression was also increased. We conducted a human skin test using a cream-based product containing 3D cultured ADMSCs-CM. In skin texture assessment, skin roughness decreased by 11.94% at the application site and 3.74% at the non-application site after 3 weeks of use. Compared with before cream use, after 2 and 4 weeks of substance use, the skin elasticity analysis showed an increase in the elasticity value by 5.97% and 9.34%, respectively, and the improvement of small wrinkles was 5.01% and 6.23%, respectively. After 2 and 4 weeks of test substance use, dermal density analysis showed 6.97% and 12.53% increase, respectively. Skin moisture retention analysis showed skin moisture maintained at 543.60% and 452.38%, respectively, immediately after one-time use and after 20 min of cool breeze exposure compared with before application of the test substance.

Conclusions

As raw material for cosmetic products, 3D cultured ADMSCs-CM prevented skin aging by promoting collagen production, restoring damaged skin, and increasing dermal density. Therefore, 3D cultured ADMSCs-CM can be widely applied to maintain and improve skin condition.

The effect of pore size within fibrous scaffolds fabricated using melt electrowriting on human bone marrow stem cell osteogenesis

Limitations associated with current bone grafting materials has necessitated the development of synthetic scaffolds that mimic the native tissue for bone repair. Scaffold parameters such as pore size, pore interconnectivity, fibre diameter, and fibre stiffness are crucial parameters of fibrous bone tissue engineering (BTE) scaffolds required to replicate the native environment. Optimum values vary with material, fabrication method and cell type. Melt electrowriting (MEW) provides precise control over extracellular matrix (ECM)-like fibrous scaffold architecture. The goal of this study was to fabricate and characterise poly-ε-caprolactone (PCL) fibrous scaffolds with 100, 200, and 300 μm pore sizes using MEW and determine the influence of pore size on human bone marrow stem cell (hMSC) adhesion, morphology, proliferation, mechanosignalling and osteogenesis. Each scaffold was fabricated with a fibre diameter of 4.01 ± 0.06 μm. The findings from this study highlight the enhanced osteogenic effects of controlled micro-scale fibre deposition using MEW, where the benefits of 100 μm square pores in comparison with larger pore sizes are illustrated, a pore size traditionally reported as a lower limit for osteogenesis. This suggests a lower pore size is optimal when hMSCs are seeded in a 3D ECM-like fibrous structure, with the 100 μm pore size optimal as it demonstrates the highest global stiffness, local fibre stiffness, highest seeding efficiency, maintains a spread cellular morphology, and significantly enhances hMSC collagen and mineral deposition. Similarly, this platform represents an effective in vitro model for the study of hMSC behaviour to determine the significant osteogenic benefits of controlling ECM-like fibrous BTE scaffold pore size using MEW.

An Agent-Based Discrete Collagen Fiber Network Model of Dynamic Traction Force-Induced Remodeling

Microstructural properties of extracellular matrix (ECM) promote cell and tissue homeostasis as well as contribute to the formation and progression of disease. In order to understand how microstructural properties influence the mechanical properties and traction force-induced remodeling of ECM, we developed an agent-based model that incorporates repetitively applied traction force within a discrete fiber network. An important difference between our model and similar finite element models is that by implementing more biologically realistic dynamic traction, we can explore a greater range of matrix remodeling. Here, we validated our model by reproducing qualitative trends observed in three sets of experimental data reported by others: tensile and shear testing of cell-free collagen gels, collagen remodeling around a single isolated cell, and collagen remodeling between pairs of cells. In response to tensile and shear strain, simulated acellular networks with straight fibrils exhibited biphasic stress-strain curves indicative of strain-stiffening. When fibril curvature was introduced, stress-strain curves shifted to the right, delaying the onset of strain-stiffening. Our data support the notion that strain-stiffening might occur as individual fibrils successively align along the axis of strain and become engaged in tension. In simulations with a single, contractile cell, peak collagen displacement occurred closest to the cell and decreased with increasing distance. In simulations with two cells, compaction of collagen between cells appeared inversely related to the initial distance between cells. These results for cell-populated collagen networks match in vitro findings. A demonstrable benefit of modeling is that it allows for further analysis not feasible with experimentation. Within two-cell simulations, strain energy within the collagen network measured from the final state was relatively uniform around the outer surface of cells separated by 250 μm, but became increasingly nonuniform as the distance between cells decreased. For cells separated by 75 and 100 μm, strain energy peaked in the direction toward the other cell in the region in which fibrils become highly aligned and reached a minimum adjacent to this region, not on the opposite side of the cell as might be expected. This pattern of strain energy was partly attributable to the pattern of collagen compaction, but was still present when mapping strain energy divided by collagen density. Findings like these are of interest because fibril alignment, density, and strain energy may each contribute to contact guidance during tissue morphogenesis.

Mediating human stem cell behaviour via defined fibrous architectures by melt electrospinning writing

The architecture within which cells reside is key to mediating their specific functions within the body. In this study, we use melt electrospinning writing (MEW) to fabricate cell micro-environments with various fibrous architectures to study their effect on human stem cell behaviour. We designed, built and optimised a MEW apparatus and used it to fabricate four different platform designs of 10.4 ± 2 μm fibre diameter, with angles between fibres on adjacent layers of 90°, 45°, 10° and R (random). Mechanical characterisation was conducted via tensile testing, and human skeletal stem cells (hSSCs) were seeded to scaffolds to study the effect of architecture on cell morphology and mechanosensing (nuclear YAP). Cell morphology was significantly altered between groups, with cells on 90° scaffolds having a lower aspect ratio, greater spreading, greater cytoskeletal tension and nuclear YAP expression. Long term cell culture studies were then conducted to determine the differentiation potential of scaffolds in terms of alkaline phosphatase activity, collagen and mineral production. Across these studies, an increased cell spreading in 3-dimensions is seen with decreasing alignment of architecture correlated with enhanced osteogenesis. This study therefore highlights the critical role of fibrous architecture in regulating stem cell behaviour with implications for tissue engineering and disease progression.

STATEMENT OF SIGNIFICANCE

This is the first study which has investigated the effect of controlled fibrous architectures fabricated via melt electrospinning writing on stem cell behaviour and differentiation. After optimising the fabrication process and characterising scaffolds via SEM and mechanical testing, skeletal stem cells were seeded onto fibrous scaffolds with various micro-architectures. These architectures drove cell shape changes resulting in architecture dependent nuclear YAP localisation, suggesting altered mechanosensing at early time points. In agreement with these early markers, long term cell culture studies revealed for the first time that a 90° fibrous architecture is optimal for the osteogenic differentiation of skeletal stem cells.

Independent control of matrix adhesiveness and stiffness within a 3D self-assembling peptide hydrogel

A cell's insoluble microenvironment has increasingly been shown to exert influence on its function. In particular, matrix stiffness and adhesiveness strongly impact behaviors such as cell spreading and differentiation, but materials that allow for independent control of these parameters within a fibrous, stromal-like microenvironment are very limited. In the current work, we devise a self-assembling peptide (SAP) system that facilitates user-friendly control of matrix stiffness and RGD (Arg-Gly-Asp) concentration within a hydrogel possessing a microarchitecture similar to stromal extracellular matrix. In this system, the RGD-modified SAP sequence KFE-RGD and the scrambled sequence KFE-RDG can be directly swapped for one another to change RGD concentration at a given matrix stiffness and total peptide concentration. Stiffness is controlled by altering total peptide concentration, and the unmodified base peptide KFE-8 can be included to further increase this stiffness range due to its higher modulus. With this tunable system, we demonstrate that human mesenchymal stem cell morphology and differentiation are influenced by both gel stiffness and the presence of functional cell binding sites in 3D culture. Specifically, cells 24 hours after encapsulation were only able to spread out in stiffer matrices containing KFE-RGD. Upon addition of soluble adipogenic factors, soft gels facilitated the greatest adipogenesis as determined by the presence of lipid vacuoles and PPARγ-2 expression, while increasing KFE-RGD concentration at a given stiffness had a negative effect on adipogenesis. This three-component hydrogel system thus allows for systematic investigation of matrix stiffness and RGD concentration on cell behavior within a fibrous, three-dimensional matrix.

STATEMENT OF SIGNIFICANCE

Physical cues from a cell's surrounding environment-such as the density of cell binding sites and the stiffness of the surrounding material-are increasingly being recognized as key regulators of cell function. Currently, most synthetic biomaterials used to independently tune these parameters lack the fibrous structure characteristic of stromal extracellular matrix, which can be important to cells naturally residing within stromal tissues. In this manuscript, we describe a 3D hydrogel encapsulation system that provides user-friendly control over matrix stiffness and binding site concentration within the context of a stromal-like microarchitecture. Binding site concentration and gel stiffness both influenced cell spreading and differentiation, highlighting the utility of this system to study the independent effects of these material properties on cell function.

Influence of diameter of fiber membrane scaffolds on the biocompatibility of hPDL mesenchymal stromal cells

This study evaluated the influence in the biocompatibility of human periodontal ligament (hPDL) mesenchymal stromal cell onto poly lactic-acid (PLA) films and PLA fiber membrane. Fiber scaffold was prepared via air jet spinning (AJS) from PLA solutions (6, 7, and 10%) and analyzed using SEM, AFM and FTIR. Biocompatibility was evaluated by adhesion, proliferation and cell-material interaction. PLA film exhibited a smooth and homogenously surface topography in comparison with random orientation of PLA fiber with roughness structure where diameter size depends on PLA solution. Moreover, cell adhesion; proliferation and cell-material interaction has the best respond on random orientation nanofiber of 10, followed by 7, and 6% of PLA in comparison with PLA films. It could be concluded that AJS is an attractive alternative technique for manufacture fiber scaffolds with a tunable random orientation geometry of fibers that allow to produce interconnected porous formed by nanometric fiber diameter structures that could be a potential scaffold for periodontal tissue engineering applications.

Progress in Integrative Biomaterial Systems to Approach Three-Dimensional Cell Mechanotransduction

Mechanotransduction between cells and the extracellular matrix regulates major cellular functions in physiological and pathological situations. The effect of mechanical cues on biochemical signaling triggered by cell-matrix and cell-cell interactions on model biomimetic surfaces has been extensively investigated by a combination of fabrication, biophysical, and biological methods. To simulate the in vivo physiological microenvironment in vitro, three dimensional (3D) microstructures with tailored bio-functionality have been fabricated on substrates of various materials. However, less attention has been paid to the design of 3D biomaterial systems with geometric variances, such as the possession of precise micro-features and/or bio-sensing elements for probing the mechanical responses of cells to the external microenvironment. Such precisely engineered 3D model experimental platforms pave the way for studying the mechanotransduction of multicellular aggregates under controlled geometric and mechanical parameters. Concurrently with the progress in 3D biomaterial fabrication, cell traction force microscopy (CTFM) developed in the field of cell biophysics has emerged as a highly sensitive technique for probing the mechanical stresses exerted by cells onto the opposing deformable surface. In the current work, we first review the recent advances in the fabrication of 3D micropatterned biomaterials which enable the seamless integration with experimental cell mechanics in a controlled 3D microenvironment. Then, we discuss the role of collective cell-cell interactions in the mechanotransduction of engineered tissue equivalents determined by such integrative biomaterial systems under simulated physiological conditions.

Use of airway epithelial cell culture to unravel the pathogenesis and study treatment in obstructive airway diseases

Asthma and chronic obstructive pulmonary disease (COPD) are considered as two distinct obstructive diseases. Both chronic diseases share a component of airway epithelial dysfunction. The airway epithelium is localized to deal with inhaled substances, and functions as a barrier preventing penetration of such substances into the body. In addition, the epithelium is involved in the regulation of both innate and adaptive immune responses following inhalation of particles, allergens and pathogens. Through triggering and inducing immune responses, airway epithelial cells contribute to the pathogenesis of both asthma and COPD. Various in vitro research models have been described to study airway epithelial cell dysfunction in asthma and COPD. However, various considerations and cautions have to be taken into account when designing such in vitro experiments. Epithelial features of asthma and COPD can be modelled by using a variety of disease-related invoking substances either alone or in combination, and by the use of primary cells isolated from patients. Differentiation is a hallmark of airway epithelial cells, and therefore models should include the ability of cells to differentiate, as can be achieved in air-liquid interface models. More recently developed in vitro models, including precision cut lung slices, lung-on-a-chip, organoids and human induced pluripotent stem cells derived cultures, provide novel state-of-the-art alternatives to the conventional in vitro models. Furthermore, advanced models in which cells are exposed to respiratory pathogens, aerosolized medications and inhaled toxic substances such as cigarette smoke and air pollution are increasingly used to model e.g. acute exacerbations. These exposure models are relevant to study how epithelial features of asthma and COPD are affected and provide a useful tool to study the effect of drugs used in treatment of asthma and COPD. These new developments are expected to contribute to a better understanding of the complex gene-environment interactions that contribute to development and progression of asthma and COPD.

Dual crosslinked chondroitin sulfate injectable hydrogel formed via continuous Diels-Alder (DA) click chemistry for bone repair

In the present work, a thermosensetive copolymer with a low gelation concentration under 37°C, F127@ChS (F127 crosslinked chondroitin sulfate) was synthesized via DA click chemistry between F127-AMI (maleimido terminated F127) and ChS-furan (furfurylamine grafted chondroitin sulfate). Then, dual crosslinked hydrogels were prepared based on F127@ChS and PEG-AMI (maleimido terminated polyethylene glycol). The physical crosslinking of F127@ChS affords the hydrogel fast gelation behavior, while in situ DA click reaction occurred between F127@ChS and PEG-AMI affords the hydrogel system covalent crosslinking. The dual crosslinked injectable hydrogel was applied as scaffold to load BMP-4 for rat cranial defect repair. As indicated by X-ray imaging, cranial digital images and histological (HE and Masson) staining analysis, new bone tissues were formed in the defected area after 12 weeks repair. The results demonstrate that the novel dual crosslinked injectable hydrogel offer an interesting option for cranial bone tissue engineering.

Effects of polyethylene oxide and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanofibrous substrate on omental adipose-derived mesenchymal stem cell neuronal differentiation and peripheral nerve regeneration

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and polyethylene oxide (PEO) display biodegradable and biocompatible properties for applications in the biomedical fields. PEO incorporated with PHBV fabricates superior electrospun nanofibres.