Effects of antigen removal on a porcine osteochondral xenograft for articular cartilage repair

Biomechanical properties of articular cartilage in different regions and sites of the knee joint: acquisition of osteochondral allografts

Osteochondral allograft (OCA) transplantation involves grafting of natural hyaline cartilage and supporting subchondral bone into the cartilage defect area to restore its biomechanical and tissue structure. However, differences in biomechanical properties and donor-host matching may impair the integration of articular cartilage (AC). This study analyzed the biomechanical properties of the AC in different regions of different sites of the knee joint and provided a novel approach to OCA transplantation. Intact stifle joints from skeletally mature pigs were collected from a local abattoir less than 8 h after slaughter. OCAs were collected from different regions of the joints. The patella and the tibial plateau were divided into medial and lateral regions, while the trochlea and femoral condyle were divided into six regions. The OCAs were analyzed and compared for Young's modulus, the compressive modulus, and cartilage thickness. Young's modulus, cartilage thickness, and compressive modulus of OCA were significantly different in different regions of the joints. A negative correlation was observed between Young's modulus and the proportion of the subchondral bone (r =  - 0.4241, P < 0.0001). Cartilage thickness was positively correlated with Young's modulus (r = 0.4473, P < 0.0001) and the compressive modulus (r = 0.3678, P < 0.0001). During OCA transplantation, OCAs should be transplanted in the same regions, or at the closest possible regions to maintain consistency of the biomechanical properties and cartilage thickness of the donor and recipient, to ensure smooth integration with the surrounding tissue. A 7 mm depth achieved a higher Young's modulus, and may represent the ideal length.

High-Speed Centrifugation Efficiently Removes Immunogenic Elements in Osteochondral Allografts

OBJECTIVES

The current clinical pulse lavage technique for flushing fresh osteochondral allografts (OCAs) to remove immunogenic elements from the subchondral bone is ineffective. This study aimed to identify the optimal method for removing immunogenic elements from OCAs.

METHODS

We examined five methods for the physical removal of immunogenic elements from OCAs from the femoral condyle of porcine knees. We distributed the OCAs randomly into the following seven groups: (1) control, (2) saline, (3) ultrasound, (4) vortex vibration (VV), (5) low-pulse lavage (LPL), (6) high-pulse lavage (HPL), and (7) high-speed centrifugation (HSC). OCAs were evaluated using weight measurement, micro-computed tomography (micro-CT), macroscopic and histological evaluation, DNA quantification, and chondrocyte activity testing. Additionally, the subchondral bone was zoned to assess the bone marrow and nucleated cell contents. One-way ANOVA and paired two-tailed Student's t-test are used for statistical analysis.

RESULTS

Histological evaluation and DNA quantification showed no significant reduction in marrow elements compared to the control group after the OCAs were treated with saline, ultrasound, or VV treatments; however, there was a significant reduction in marrow elements after LPL, HPL, and HSC treatments. Furthermore, HSC more effectively reduced the marrow elements of OCAs in the middle and deep zones compared with LPL (p < 0.0001) and HPL (p < 0.0001). Macroscopic evaluation revealed a significant reduction in blood, lipid, and marrow elements in the subchondral bone after HSC. Micro-CT, histological analyses, and chondrocyte viability results showed that HSC did not damage the subchondral bone and cartilage; however, LPL and HPL may damage the subchondral bone.

CONCLUSION

HSC may play an important role in decreasing immunogenicity and therefore potentially increasing the success of OCA transplantation.

Decellularized extracellular matrix biomaterials for regenerative therapies: Advances, challenges and clinical prospects

Tissue engineering and regenerative medicine have shown potential in the repair and regeneration of tissues and organs via the use of engineered biomaterials and scaffolds. However, current constructs face limitations in replicating the intricate native microenvironment and achieving optimal regenerative capacity and functional recovery. To address these challenges, the utilization of decellularized tissues and cell-derived extracellular matrix (ECM) has emerged as a promising approach. These biocompatible and bioactive biomaterials can be engineered into porous scaffolds and grafts that mimic the structural and compositional aspects of the native tissue or organ microenvironment, both in vitro and in vivo. Bioactive dECM materials provide a unique tissue-specific microenvironment that can regulate and guide cellular processes, thereby enhancing regenerative therapies. In this review, we explore the emerging frontiers of decellularized tissue-derived and cell-derived biomaterials and bio-inks in the field of tissue engineering and regenerative medicine. We discuss the need for further improvements in decellularization methods and techniques to retain structural, biological, and physicochemical characteristics of the dECM products in a way to mimic native tissues and organs. This article underscores the potential of dECM biomaterials to stimulate in situ tissue repair through chemotactic effects for the development of growth factor and cell-free tissue engineering strategies. The article also identifies the challenges and opportunities in developing sterilization and preservation methods applicable for decellularized biomaterials and grafts and their translation into clinical products.

Cell Therapy Approaches for Articular Cartilage Regeneration

Articular cartilage is a common cartilage type found in a multitude of joints throughout the human body. However, cartilage is limited in its regenerative capacity. A range of methods have been employed to aid adults under the age of 45 with cartilage defects, but other cartilage pathologies such as osteoarthritis are limited to non-steroidal anti-inflammatory drugs and total joint arthroplasty. Cell therapies and synthetic biology can be utilized to assist not only cartilage defects but have the potential as a therapeutic approach for osteoarthritis as well. In this review, we will cover current cell therapy approaches for cartilage defect regeneration with a focus on autologous chondrocyte implantation and matrix autologous chondrocyte implantation. We will then discuss the potential of stem cells for cartilage repair in osteoarthritis and the use of synthetic biology to genetically engineer cells to promote cartilage regeneration and potentially reverse osteoarthritis.

Supercritical Carbon Dioxide Decellularized Xenograft-3D CAD/CAM Carved Bone Matrix Personalized for Human Bone Defect Repair

About 30-50% of oral cancer patients require mandibulectomy and autologous fibula reconstruction. Autograft is the gold standard choice because of its histocompatibility; however, it requires additional surgery from the patient and with possible complications such as loss of fibula leading to calf weakening in the future. Allograft and xenograft are alternatives but are susceptible to immune response. Currently, no personalized bone xenografts are available in the market for large fascial bone defects. In addition, a large-sized complex shape bone graft cannot be produced directly from the raw material. We propose the use of porcine bones with 3D CAD/CAM carving to reconstruct a personalized, wide range and complex-shaped bone. We anticipate that patients can restore their native facial appearance after reconstruction surgery. Supercritical CO2 (SCCO2) technology was employed to remove the cells, fat and non-collagenous materials while maintaining a native collagen scaffold as a biomedical device for bone defects. We successfully developed 3D CAD/CAM carved bone matrices, followed by SCCO2 decellularization of those large-sized bones. A lock-and-key puzzle design was employed to fulfil a wide range of large and complex-shaped maxillofacial defects. To conclude, the 3D CAD/CAM carved bone matrices with lock and key puzzle Lego design were completely decellularized by SCCO2 extraction technology with intact natural collagen scaffold. In addition, the processed bone matrices were tested to show excellent cytocompatibility and mechanical stiffness. Thus, we can overcome the limitation of large size and complex shapes of xenograft availability. In addition, the 3D CAD/CAM carving process can provide personalized tailor-designed decellularized bone grafts for the native appearance for maxillofacial reconstruction surgery for oral cancer patients and trauma patients.

Osteochondral regeneration in rabbit using xenograft decellularized ECM in combination with different biological products; platelet-rich fibrin, amniotic membrane extract, and mesenchymal stromal cells

This study aimed to investigate the regenerative effect of decellularized osteochondral ECM xenograft in combination with various biological products in an osteochondral (OC) defect. OC tissue from the sheep femur were obtained and decellularized. The decellularized ECM (dECM) was combined with either platelet-rich fibrin (PRF), amniotic membrane extract (AME), or rabbit bone marrow-derived mesenchymal stromal cells (rBMSCs). The hybrid dECM-biological products were then utilized for the treatment of rabbit OC critical size defects. The regenerative potential of different groups was compared using; MRI, macroscopic assessment, histopathology, and histomorphometry. All characterizations analysis verified successful decellularization. Three months post-surgery, macroscopic findings indicated that dECM was better compared to controls. Also, dECM in combination with AME, PRF, and rBMSCs showed enhanced OC regeneration compared to only dECM (AME: +100%, PRF: +61%, rBMSCs: +28%). In particular, the dECM+AME group results in the best integration of new cartilage into surrounding cartilage tissue. The histomorphometric evaluations demonstrated enhancement in new cartilage formation and bone tissue (86.5 ± 5.9% and 90 ± 7.7%, respectively) for the dECM+AME group compared to other groups. Furthermore, histological results for the dECM+AME elucidated a mature hyaline cartilage tissue that covered the new and symmetrically formed subchondral bone, exhibiting a significantly higher regenerative effect compared to all other treated groups. This finding was also confirmed with MRI images. The current study revealed that in addition to the benefits of dECM alone, its combination with AME indicated to have a superior regenerative effect on OC regeneration. Overall, dECM+AME may be considered a suitable construct for treating knee OC injuries.

Osteochondral Tissue Engineering: The Potential of Electrospinning and Additive Manufacturing

The socioeconomic impact of osteochondral (OC) damage has been increasing steadily over time in the global population, and the promise of tissue engineering in generating biomimetic tissues replicating the physiological OC environment and architecture has been falling short of its projected potential. The most recent advances in OC tissue engineering are summarised in this work, with a focus on electrospun and 3D printed biomaterials combined with stem cells and biochemical stimuli, to identify what is causing this pitfall between the bench and the patients' bedside. Even though significant progress has been achieved in electrospinning, 3D-(bio)printing, and induced pluripotent stem cell (iPSC) technologies, it is still challenging to artificially emulate the OC interface and achieve complete regeneration of bone and cartilage tissues. Their intricate architecture and the need for tight spatiotemporal control of cellular and biochemical cues hinder the attainment of long-term functional integration of tissue-engineered constructs. Moreover, this complexity and the high variability in experimental conditions used in different studies undermine the scalability and reproducibility of prospective regenerative medicine solutions. It is clear that further development of standardised, integrative, and economically viable methods regarding scaffold production, cell selection, and additional biochemical and biomechanical stimulation is likely to be the key to accelerate the clinical translation and fill the gap in OC treatment.

Decellularized xenogenic cartilage extracellular matrix (ECM) scaffolds for the reconstruction of osteochondral defects in rabbits

The use of decellularized native allogenic or xenogenic cartilaginous extracellular matrix (ECM) biomaterials is widely expanding in the fields of tissue engineering and regenerative medicine. In this study, we aimed to develop an acellular, affordable, biodegradable, easily available goat conchal cartilaginous ECM derived scaffolding biomaterial for repair and regeneration of osteochondral defects in rabbits. Cartilages harvested from freshly collected goat ears were decellularized using chemical agents, namely, hypotonic-hypertonic (HH) buffer and Triton X-100 solution, separately. The morphologies and ultrastructure orientations of the decellularized cartilages remained unaltered in spite of complete cellular loss. Furthermore, when the acellular cartilaginous ECMs were cultured with murine mesenchymal stem cells (MSCs) (C3H10T1/2 cells), cellular infiltration and proliferation were thoroughly monitored using SEM, DAPI and FDA stained images, whereas the MTT assay proved the biocompatibility of the matrices. The increasing amounts of secreted ECM proteins (collagen and sGAG) indicated successful chondrogenic differentiation of the MSCs in the presence of the treated cartilage samples. In vivo biocompatibility studies showed no significant immune response or tissue rejection in the treated samples but tissue necrosis in control samples after 3 months. Upon implantation of the constructs in rabbits' osteochondral defects for 3 months, the histological and micro-CT evaluation revealed significant enhancement and regeneration of neocartilage and subchondral bony tissues. The IGF-1 loaded cartilaginous constructs showed comparatively better healing response after 3 months. Our results showed that decellularized xenogenic cartilaginous biomaterials preserved the bioactivity and integrity of the matrices that also favored in vitro stem cell proliferation and chondrogenic differentiation and enabled osteochondral regeneration, thus paving a new way for articular cartilage reconstruction.

Graphene Oxide-Doped Gellan Gum-PEGDA Bilayered Hydrogel Mimicking the Mechanical and Lubrication Properties of Articular Cartilage

Articular cartilage (AC) is a specialized connective tissue able to provide a low-friction gliding surface supporting shock-absorption, reducing stresses, and guaranteeing wear-resistance thanks to its structure and mechanical and lubrication properties. Being an avascular tissue, AC has a limited ability to heal defects. Nowadays, conventional strategies show several limitations, which results in ineffective restoration of chondral defects. Several tissue engineering approaches have been proposed to restore the AC's native properties without reproducing its mechanical and lubrication properties yet. This work reports the fabrication of a bilayered structure made of gellan gum (GG) and poly (ethylene glycol) diacrylate (PEGDA), able to mimic the mechanical and lubrication features of both AC superficial and deep zones. Through appropriate combinations of GG and PEGDA, cartilage Young's modulus is effectively mimicked for both zones. Graphene oxide is used as a dopant agent for the superficial hydrogel layer, demonstrating a lower friction than the nondoped counterpart. The bilayered hydrogel's antiwear properties are confirmed by using a knee simulator, following ISO 14243. Finally, in vitro tests with human chondrocytes confirm the absence of cytotoxicity effects. The results shown in this paper open the way to a multilayered synthetic injectable or surgically implantable filler for restoring AC defects.

Development of a decellularized porcine bone graft by supercritical carbon dioxide extraction technology for bone regeneration

A series of novel decellularized porcine collagen bone graft (DPB) materials in a variety of shapes and sizes were developed by the supercritical carbon dioxide (SCCO₂ ) extraction technique. The complete decellularization of DPB was confirmed by hematoxylin and eosin staining, 4,6-diamidino-2-phenylindole (DAPI) staining, and residual DNA analysis. The native intact collagen remained in the DPB after the SCCO₂ process was confirmed by Masson trichrome staining. The physicochemical characteristics of DPB were investigated by scanning electron microscopy and x-ray diffraction. The cytotoxicity and biocompatibility tests according to ISO10993 and its efficacy for bone regeneration in osteochondral defects in rabbits were evaluated. The rabbit pyrogen test confirmed DPB was non-toxic. In vitro and in vivo biocompatibility tests of the DPB did not show any toxic or mutagenic effects. The bone regeneration potential of the DPB presented no significant histological differences compared to commercially available deproteinized bovine bone. In conclusion, DPB produced by SCCO₂ exhibited similar chemical characteristics to human bone, no toxicity, good biocompatibility, and enhanced bone regeneration in rabbits comparable to that of deproteinized bovine bone. Results from this study could shed light on the potential application of the SCCO₂ extraction technique to generate a native decellularized scaffold for bone tissue regeneration in human clinical trials.

Tissue-derived decellularized extracellular matrices toward cartilage repair and regeneration

The inability of cartilage tissue to self-heal due to its avascular nature often leads to conditions such as osteoarthritis, traumatic rupture of cartilage, and osteochondrosis. The cartilage provides cushioning effects between the joints and avoids bone frictions. The extracellular matrix (ECM) of cartilage consists predominantly of collagens, elastin, proteoglycans and glycoproteins. A number of tissue engineered ECM derived biological scaffolds and matrices are available for cartilage regeneration. The decellularized tissues provide appropriate bioactive cues in the absence of cellular components, hence avoiding immunological issue. However, the decellularization process involves several cellular disruption techniques that may alter the ECM architecture affecting bioactivity. Therefore, development of cell-free cartilage biomaterials with unaltered ECM integrity and bioactivity is of paramount necessity by smart selection of modified techniques and agents. Herein, we described about various decellularization methods, agents, techniques, and their applications in tissue/cartilage decellularization. It also contemplates various difficulties and future perspectives to troubleshoot the existing obstructions in tissue-derived cartilage matrices and their applications.

A Systematic Review and Guide to Mechanical Testing for Articular Cartilage Tissue Engineering

Articular cartilage is integral to the mechanical function of many joints in the body. When injured, cartilage lacks the capacity to self-heal, and thus, therapies and replacements have been developed in recent decades to treat damaged cartilage. Given that the primary function of articular cartilage is mechanical in nature, rigorous physical evaluation of cartilage tissues undergoing treatment and cartilage constructs intended for replacement is an absolute necessity. With the large number of groups developing cartilage tissue engineering strategies, however, a variety of mechanical testing protocols have been reported in the literature. This lack of consensus in testing methods makes comparison between studies difficult at times, and can lead to misinterpretation of data relative to native tissue. Therefore, the purpose of this study was to systematically review mechanical testing of articular cartilage and cartilage repair constructs over the past 10 years (January 2009-December 2018), to highlight the most common testing configurations, and to identify key testing parameters. For the most common tests, key parameters identified in this systematic review were validated by characterizing both cartilage tissue and hydrogels commonly used in cartilage tissue engineering. Our findings show that compression testing was the most common test performed (80.2%; 158/197), followed by evaluation of frictional properties (18.8%; 37/197). Upon further review of those studies performing compression testing, the various modes (ramp, stress relaxation, creep, dynamic) and testing configurations (unconfined, confined, in situ) are described and systematically reviewed for parameters, including strain rate, equilibrium time, and maximum strain. This systematic analysis revealed considerable variability in testing methods. Our validation testing studies showed that such variations in testing criteria could have large implications on reported outcome parameters (e.g., modulus) and the interpretation of findings from these studies. This analysis is carried out for all common testing methods, followed by a discussion of less common trends and directions in the mechanical evaluation of cartilage tissues and constructs. Overall, this work may serve as a guide for cartilage tissue engineers seeking to rigorously evaluate the physical properties of their novel treatment strategies. Impact Statement Articular cartilage tissue engineering has made significant strides with regard to treatments and replacements for injured tissue. The evaluation of these approaches typically involves mechanical testing, yet the plethora of testing techniques makes comparisons between studies difficult, and often leads to misinterpretation of data compared with native tissue. This study serves as a guide for the mechanical testing of cartilage tissues and constructs, highlighting recent trends in test conditions and validating these common procedures. Cartilage tissue engineers, especially those unfamiliar with mechanical testing protocols, will benefit from this study in their quest to physically evaluate novel treatment and regeneration approaches.

Modulating macrophage responses to promote tissue regeneration by changing the formulation of bone extracellular matrix from filler particles to gel bioscaffolds

Extracellular matrices (ECMs) derived from native tissues/organs have been used as biomaterials for tissue engineering and regenerative medicine in a wide range of preclinical and clinical settings. The success or failure of these applications is largely contingent on the host responses to the matrices in vivo. Despite retaining their native structural and functional proteins, bone ECM-based transplants have been reported to evoke adverse immune responses in many cases; thus, optimizing the immunomodulatory properties of bone ECMs is critical for ensuring downstream regenerative outcomes. Using a simple digestion-neutralization protocol, we transformed the commonly used bone-derived filler particles into gel bioscaffolds. Instead of inducing macrophages toward proinflammatory (M1) polarization, as reported in the literature and confirmed in the present study for ECM particles, the ECM gels were found to be more likely to polarize macrophages toward regulatory/anti-inflammatory (M2) phenotypes, leading to enhanced tissue regeneration in a rat periodontal defect model. The present work demonstrates a simple, practical and economical strategy to modify the immunomodulatory properties of bone ECMs before their in vivo transplantation and hence has important implications that may facilitate the use of ECM-based bioscaffolds derived from diverse sources of tissues for regenerative purposes.

Comparison of various reagents for preparing a decellularized porcine cartilage scaffold

Cartilage lesion repair is difficult due to the limited self-repair capability of cartilage and its lack of vascularization. Our previous study established a sandwich model for engineering cartilage with acellular cartilage sheets (ACSs) and chondrocytes. However, there is still debate over which agent achieves the optimal decellularization of cartilage sheets. In addition, changes in the extracellular matrix after decellularization are worth studying. We aimed to determine the optimal decellularization reagents and decellularization time for preparing cartilage sheets. This study compared the effects of 2 extraction chemicals [t-octylphenoxypolyethoxyethanol (Triton X-100) and sodium dodecyl sulfate (SDS)] on cartilage sheets. The sheets were soaked in various concentrations (0.1-2%) of the extraction solutions for various time periods (24-72 h). After the decellularization process with the various treatments, we examined the cell removal and preservation of the matrix components and microstructure to determine which method was the most efficient while inducing minimal damage to the perichondrium. Both protocols achieved decellularization within an acceptable time. DNA analysis showed that the reagent removed nearly all of the DNA from the cartilage sheets. The growth factor contents in the Triton X-100 samples were higher than those in the SDS samples, quantified by enzyme-linked immunosorbent assay (ELISA). Furthermore, Triton X-100 decreased the glycosaminoglycan (GAG) and increased the chondromodulin-I contents compared with SDS. The results of a Cell Counting Kit-8 (CCK-8) assay revealed that the ACSs were not cytotoxic. In conclusion, our results demonstrate that cartilage sheets decellularized by 1% SDS for 24 h or by 2% Triton X-100 for 48 h may be suitable candidate scaffolds for cartilage tissue engineering.

Reducing porcine corneal graft rejection, with an emphasis on porcine endogenous retrovirus transmission safety: a review

Donor cornea shortage is a primary hurdle in the development of corneal transplantation. Of all species, porcine corneas are the ideal transplantation material for humans. However, the xenoimmune rejection induced by porcine corneal xenotransplantation compromises surgical efficacy. Although the binding of IgM/IgG in human serum to a genetically modified porcine cornea is significantly weaker than that of the wild type (WT), genetically modified porcine corneas do not display a prolonged graft survival time in vivo. Conversely, costimulatory blockade drugs, such as anti-CD40 antibodies, can reduce the xenoimmune response and prolong graft survival time in animal experiments. Moreover, porcine endothelial grafts can survive for more than 6mo with only the subconjunctival injection of a steroid-based immunosuppressants regime; therefore, they show great value for treating corneal endothelial disease. In addition, zoonotic transmission is a primary concern of xenotransplantation. Porcine endogenous retrovirus (PERV) is the most significant virus assessed by ophthalmologists. PERV integrates into the porcine genome and infects human cells in vitro. Fortunately, no evidence from in vivo studies has yet shown that PERV can be transmitted to hosts.