Polyamide/silver antimicrobials: effect of filler types on the silver ion release

Colour and surface functional properties of wool fabrics coated with gallnut, feijoa skin, and mango seed kernel tannin-stabilised Ag nanoparticles

In the textile industry, textile materials are dyed and multi-functionalised by multi-step treatments that considerably increase the environmental impacts by increasing water and energy usage along with increasing the generation of volume of effluent. In this work, Ag nanoparticles (Ag NPs) were in situ formed and stabilised with gallnut, feijoa fruit skin, and mango seed kernel-derived tannins, and wool fabrics were coated simultaneously with these Ag NPs in the same bath. The Ag NP treatment produced dark to light olive-brown shades on wool fabrics. The treatment conditions for the treatment with Ag NPs were optimised to achieve the best results. The colour intensity, UV radiation absorption, antibacterial activity, surface electrical resistance, and durability of the treatment to washing were assessed by various methods. The gallnut-derived tannin (GNT)-stabilised Ag NP-coated wool fabrics showed overall the best results including excellent antibacterial activity against various types of bacteria. The treatment was durable to at least 20 cycles of IWS 7A washes (equivalent to 80 domestic washes). For the 0.5% Ag NPs on the weight of fibre (owf) dosage, the UV light transmission through the trisodium citrate-stabilised Ag NP-coated fabric at 365 and 311 nm was 6.37 and 0.95% respectively, which reduced to 1.63 and 0.20% for the fabric coated with GNT-stabilised Ag NPs providing excellent protection against UV radiation. The surface resistivity of wool fabric reduced from 1.1 × 1012 ohm cm-1 for the untreated fabric to 1.1 × 109 ohm cm-1 for the fabric coated with 2.0% owf GNT-stabilised Ag NPs. The stabilisation of Ag NPs with GNT prolonged the wash-durability by reducing the leaching of Ag NPs from the treated fabric. The developed method could be a sustainable alternative to traditional multi-stage treatments conducted in the textile industry with toxic synthetic dyes and finishing agents for the colouration and multifunctionalisation of wool fabrics.

An overview of the material science and knowledge of nanomedicine, bioscaffolds, and tissue engineering for tendon restoration

Tendon wounds are a worldwide health issue affecting millions of people annually. Due to the characteristics of tendons, their natural restoration is a complicated and lengthy process. With the advancement of bioengineering, biomaterials, and cell biology, a new science, tissue engineering, has developed. In this field, numerous ways have been offered. As increasingly intricate and natural structures resembling tendons are produced, the results are encouraging. This study highlights the nature of the tendon and the standard cures that have thus far been utilized. Then, a comparison is made between the many tendon tissue engineering methodologies proposed to date, concentrating on the ingredients required to gain the structures that enable appropriate tendon renewal: cells, growth factors, scaffolds, and scaffold formation methods. The analysis of all these factors enables a global understanding of the impact of each component employed in tendon restoration, thereby shedding light on potential future approaches involving the creation of novel combinations of materials, cells, designs, and bioactive molecules for the restoration of a functional tendon.

Assessment of the neuroprotective effect of selenium-loaded chitosan nanoparticles against silver nanoparticles-induced toxicity in rats

BACKGROUND

With the recent growth in the applications of silver nanoparticles (Ag-NPs), worries about their harmful effects are increasing. Selenium plays a vital role in the antioxidant defense system as well as free radical scavenging activity.

OBJECTIVES

This study aims to inspect the neuroprotective effect of selenium-loaded chitosan nanoparticles (CS-SeNPs) against the adverse impact of Ag-NPs on brain tissue in adult rats.

DESIGN

Rats were divided into four groups: group I (control) was administered distilled water (0.5 mL/kg), group II was administered Ag-NPs (100 mg/kg), group III was administered Ag-NPs (100 mg/kg) and CS- SeNPs (0.5 mg/kg) and group IV received only CS- SeNPs (0.5 mg/kg) daily by oral gavage. After 60 days, rats were subjected to behavioral assessment and then euthanized. Brain tissues were obtained for estimation of total antioxidant capacity (TAC), malondialdehyde (MDA), 8-hydroxy-2-deoxy Guanosine (8-OHdG), and Nuclear Factor Erythroid 2 Like Protein 2 (Nrf2). Also, histological examination of the brain and immunohistochemical detection of glial fibrillary acidic protein (GFAP) were investigated RESULTS: exposure to Ag-NPs induced marked neurotoxicity in the brain tissue of rats that was manifested by decreased levels of TAC and Nrf2 with increased levels of MDA and 8-OHdG. Also, various pathological lesions with an increase in the number of GFAP immunoreactive cells were detected. While brain tissue of rats received Ag-NPs plus CS-SeNPs group (III) revealed significantly fewer pathological changes.

CONCLUSION

Co-administration of CS-SeNPs significantly ameliorates most of the Ag-NPs-induced brain damage.

Crystal Plane Impact of ZnFe2O4-Ag Nanoparticles Influencing Photocatalytical and Antibacterial Properties: Experimental and Theoretical Studies

This paper describes the crystal interphase impact of ZnFe₂O₄-Ag in the photodegradation of Rhodamine B. Prepared ZnFe₂O₄ nanoparticles (NPs) were deposited with Ag NPs to offer ZnFe₂O₄-Ag (0-2.5%). An X-ray diffraction peak corresponding to the Ag NPs was detected if the particle content reached about 2.0%, observing multiple crystalline interphases in HR-TEM. Magnetic saturation (Ms) was increased ∼160% times for ZnFe₂O₄-Ag (7.25 to 18.71 emu/g) and ZnFe₂O₄ (9.62 to 25.09 emu/g) if the temperature is lowered from 298 to 5.0 K; while for Fe₃O₄ (91.09 to 96.19 emu/g), the Ms increment was just about 5.6%. After analyzing the DFT-Density of State, a decrease of bandgap energy for ZnFe₂O₄-Ag₆ from the influence of the size of Ag cluster was seen. Quantum yield (Φ) was 0.60 for ZnFe₂O₄, 0.25 for ZnFe₂O₄-Ag (1.0%), 0.70 for ZnFe₂O₄-Ag (1.5%), 0.66 for ZnFe₂O₄-Ag (2.0%), and 0.66 for ZnFe₂O₄-Ag (2.5%), showing that the disposition of Ag NPs (1.5-2.5%) increases the Φ to >0.60. The samples were used to photo-oxidize RhB under visible light assisted by photopowered Langmuir adsorption. The degradation follows first-order kinetics (k = 5.5 × 10^-3 min^-1), resulting in a greater k = 2.0 × 10^-3 min^-1 for ZnFe₂O₄-Ag than for ZnFe₂O₄ (or Fe₃O₄, k = 1.1 × 10^-3 min^-1). DFT-total energy was used to analyze the intermediates formed from the RhB oxidation. Finally, the ZnFe₂O₄-Ag exhibits good antibacterial behavior because of the presence of Zn and the Ag components.

Inhalation of Silver Silicate Nanoparticles Leads to Transient and Differential Microglial Activation in the Rodent Olfactory Bulb

Engineered silver nanoparticles (AgNPs), including silver silicate nanoparticles (Ag-SiO₂ NPs), are used in a wide variety of medical and consumer applications. Inhaled AgNPs have been found to translocate to the olfactory bulb (OB) after inhalation and intranasal instillation. However, the biological effects of Ag-SiO₂ NPs and their potential nose-to-brain transport have not been evaluated. The present study assessed whether inhaled Ag-SiO₂ NPs can elicit microglial activation in the OB. Adult Sprague-Dawley rats inhaled aerosolized Ag-SiO₂ NPs at a concentration of 1 mg/ml for 6 hours. On day 0, 1, 7, and 21 post-exposure, rats were necropsied and OB were harvested. Immunohistochemistry on OB tissues were performed with anti-ionized calcium-binding adapter molecule 1 and heme oxygenase-1 as markers of microglial activation and oxidative stress, respectively. Aerosol characterization indicated Ag-SiO₂ NPs were sufficiently aerosolized with moderate agglomeration and high-efficiency deposition in the nasal cavity and olfactory epithelium. Findings suggested that acute inhalation of Ag-SiO₂ NPs elicited transient and differential microglial activation in the OB without significant microglial recruitment or oxidative stress. The delayed and differential pattern of microglial activation in the OB implied that inhaled Ag-SiO₂ may have translocated to the central nervous system via intra-neuronal pathways.

Preparation and insecticidal performance of sustained-release cinnamon essential oil microemulsion

BACKGROUND

To improve the utilization rate of cinnamon essential oil and compensate for the shortcomings of its easy decomposition and oxidation, the microemulsion of cinnamon essential oil was prepared using Tween 80 and anhydrous ethanol as surfactant and cosurfactant, respectively. The effects of the surfactant type, K_m value, preparation temperature and aqueous pH on the quality of the microemulsion were studied via a pseudo-ternary phase diagram. The slow-release performance of cinnamon essential oil microemulsion and the control performance of the insect repellent package on the rice weevil were characterized.

RESULTS

The results showed that, when Tween 80 was used as a surfactant and anhydrous ethanol was used as a cosurfactant, the K_m value was 3:1, preparation temperature was 40 °C, aqueous pH was 5 and prepared cinnamon essential oil microemulsion was of the O/W type. The microemulsion had strong stability and a 81.5-nm concentrated particle size distribution, and possessed excellent embedding and sustained-release effects. The prepared insect repellent active package prolongs the use time and the effect of cinnamon essential oil. The repellent rate of the rice weevil was as high as 100% after 48 h, and the contact mortality and fumigation mortality rates of the rice weevil also reached 96.67% and 86.67%, respectively, after 96 h.

CONCLUSION

The prepared cinnamon essential oil microemulsion and active packaging had a good sustained-release effect. © 2021 Society of Chemical Industry.

Antimicrobial ‘inks’ for 3D printing: block copolymer-silver nanoparticle composites synthesised using supercritical CO2

A new synthetic methodology to produce polymer-AgNP composite microparticles using scCO2 is presented. These microparticle possessed long-lived antimicrobial activity and were tested for compatibility in the Laser Sintering 3D printing process.

AgNPs@ZnO hybride nanoparticles infused thermoplastic polyester elastomer and their biocide effect

This paper presents research results of biocidal effect of thermoplastic- polyester-elastomer (TPE-E) with incorporation of hybrid Ag/ZnO/SiO2 NPs (silver/Zinc oxide/SiO2 nanoparticles). These results were compared with various gamma-irradiated doses and processing techniques including extrusion, injection molding and compression molding. In all these processing techniques the TPE-E was mixed with mineral oil and Ag/ZnO/SiO2 nanoparticles. The TPE-E nanocomposites were characterized by differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), Infrared FT spectroscopy (FTIR), surface enhanced Raman technique (SERS), FESEM (Field emission scanning electron microscopy), Energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), TEM (transmission electronic microscopy) and antimicrobial test. Antibacterial activity against E. coli and S. aureus, are reported and these results showed potential application in health care products.

Nano-sized Metal and Metal Oxide Modified Electrodes for Pharmaceuticals Analysis

:

The electrochemical analysis offers a number of important advantages such as providing information on pharmaceuticals analysis and their in vivo redox processes and pharmacological activity. The interest in developing electrochemical sensing devices for use in clinical assays is growing rapidly. Metallic nanoparticles can be synthesized and modified with various chemical functional groups, which allow them to be conjugated with antibodies, ligands, and drugs of interest.

:

In this article, the novel developments to enhance the performance of sensor modified with metal nanoparticles of pharmaceuticals were reviewed. A discussion of the properties of metal nanostructures and their application in drug analysis is presented. Their application as a modifier agent in determining low levels of drugs in pharmaceutical dosage forms and biological samples is discussed. It has been found that the electrocatalytic effect of the electrode, sensitivity and selectivity were increased using various working electrodes modified with nano-sized metal, metal oxide and metal/metal oxide particles.

Cellulose nanocrystal assisted trace silver nitrate to synthesize green silver nanocomposites with antibacterial activity

Cellulose nanocrystals (CNCs) with silver nanoparticles (AgNPs) are used for applications ranging from chemical catalysis to environmental remediation, and generation of smart electronics and biological medicine such as antibacterial agents. To reduce the synthesis cost of AgNPs and environmental pollution, microwave-assisted generation of AgNPs on the CNC surface (AgNPs@CNC) has been found to be useful, because microwave reaction has the advantages of simple reaction conditions, short reaction time and high reaction efficiency. The silver ions (Ag⁺) could be added to the CNC suspension and placed in the microwave reactor for a few minutes to produce AgNPs. AgNP generation was affected by factors such as the concentrations of Ag⁺ and CNC, and the power of the microwave, as well as the time of reaction. In this study, we used trace amounts of AgNO₃ to rapidly synthesize AgNPs using a green microwave-based method instead of Tollen's reagent, and the antibacterial activity of the T1 sample showed that only using 0.03 mM (∼0.01 wt%) AgNO₃ to synthesize AgNPs@CNC could achieve good antibacterial properties.

Cellulose nanocrystals (CNCs) with silver nanoparticles (AgNPs) are used for applications ranging from chemical catalysis to environmental remediation, and generation of smart electronics and biological medicine such as antibacterial agents.

Antimicrobial efficacy of platinum-doped silver nanoparticles

Silver nanoparticles (AgNPs) have been proposed to combat oral infection due to their efficient ionic silver (Ag+ ) release. However, concentrations required for antimicrobial efficacy may not be therapeutically viable. In this work, platinum-doped silver nanoparticles (Pt-AgNPs) were explored to evaluate their potential for enhanced Ag+ release, which could lead to enhanced antimicrobial efficacy against S. aureus, P. aeruginosa, and E. coli. AgNPs doped with 0.5, 1, and 2 mol% platinum (Pt0.5 -AgNPs, Pt1 -AgNPs, and Pt2 -AgNPs) were synthesized by a chemical reduction method. Transmission electron microscopy revealed mixed morphologies of spherical, oval, and ribbon-like nanostructures. Surface-enhanced Raman scattering revealed that the surface of Pt-AgNPs was covered with up to 93% Pt. The amount of Ag+ released increased 16.3-fold for Pt2 -AgNPs, compared to AgNPs. The initial lag phase in bacterial growth curve was prolonged for Pt-AgNPs. This is consistent with a Ag+ release profile that exhibited an initial burst followed by sustained release. Doping AgNPs with platinum significantly increased the antimicrobial efficacy against all species. Pt2 -AgNPs exhibited the lowest minimum inhibitory concentrations, followed by Pt1 -AgNPs, Pt0.5 -AgNPs, and AgNPs, respectively. Doping AgNPs with a small amount of platinum promoted the release of Ag+ , based on the sacrificial anodic effect, and subsequently enhanced their antimicrobial efficacy.

Simultaneous green synthesis and in-situ impregnation of silver nanoparticles into organic nanofibers by Lythrum salicaria extract: Morphological, thermal, antimicrobial and release properties

This research has revealed the promising, green and one-pot approach for fabrication of antimicrobial nanohybrids based on organic nanofibers including cellulose (CNF), chitosan (CHNF), and lignocellulose (LCNF) nanofibers impregnated with silver nanoparticles (AgNPs). Lythrum salicaria extract was used as a reducing agent as well as a capping agent. Formation of the spherical AgNPs ranging between 45 and 65 nm was proved by UV-Vis spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS). Biomaterials supported AgNPs were characterized and compared for their morphological, thermal, release, and antimicrobial properties. The considerable influence of the phenolic compounds of L.salicaria extract on the synthesis and uniform distribution of AgNPs on nanofibers was confirmed by field emission electron microscopy (FE-SEM). Energy dispersive X-ray spectroscopy (EDX) and ICP-OES analysis of nanohybrids, reflected a high loading capacity for LCNF and also CHNF in contrast to CNF. The release of AgNPs from LCNF substrate was lower than other nanofibers but the order of antimicrobial activity of nanohybrids against E.coli and S.aureus was as this: CHNF ˃ LCNF ˃ CNF. Generally, this research suggested that the efficiency of CHNF and LCNF as immobilizing support of AgNPs is higher than CNF and L.salicaria extract was proposed as a high potential reducing and capping agent.

Synergistic Photodynamic and Photothermal Antibacterial Nanocomposite Membrane Triggered by Single NIR Light Source

Herein, we developed a nanocomposite membrane with synergistic photodynamic therapy and photothermal therapy antibacterial effects, triggered by a single near-infrared (NIR) light illumination. First, upconversion nanoparticles (UCNPs) with a hierarchical structure (UCNPs@TiO₂) were synthesized, which use NaYF₄:Yb,Tm nanorods as the core and TiO₂ nanoparticles as the outer shell. Then, nanosized graphene oxide (GO), as a photothermal agent, was doped into UCNPs@TiO₂ core-shell nanoparticles to obtain UCNPs@TiO₂@GO. Afterward, the mixture of UCNPs@TiO₂@GO in poly(vinylidene) fluoride (PVDF) was applied for electrospinning to generate the nanocomposite membrane (UTG-PVDF). Generation of reactive oxygen species (ROS) and changes of temperature triggered by NIR action were both investigated to evaluate the photodynamic and photothermal properties. Upon a single NIR light (980 nm) irradiation for 5 min, the nanocomposite membrane could simultaneously generate ROS and moderate temperature rise, triggering synergistic antibacterial effects against both Gram-positive and -negative bacteria, which are hard to be achieved by an individual photodynamic or photothermal nanocomposite membrane. Additionally, the as-prepared membrane can effectively restrain the inflammatory reaction and accelerate wound healing, thus exhibiting great potentials in treating infectious complications in wound healing progress.

Green synthesis of silver nanoparticle by cauliflower extract: characterisation and antibacterial activity against storage

Green synthesis of silver nanoparticles (AgNPs) was accomplished using different volumes of cauliflower extract and 0.001 M silver nitrate solution at 80°C for 15 min. A brownish‐red solution of AgNPs formed was tested by ultraviolet–visible absorption spectroscopy, Fourier‐transform infrared (FTIR), scanning electron microscopy (SEM), and X‐ray diffraction (XRD). Surface plasmon resonance of AgNPs appeared at 416 nm. Also, the kinetic of AgNPs formation was studied and follows a sigmoidal pattern. Storing time was studied for the freshly prepared AgNPs after 60 days. FTIR analysis shows the adsorption of active components on AgNPs surface, and these components are responsible for reduction besides working as a stabiliser like a capping agent, also FTIR analysis of AgNPs after storage showed no change in peaks location. The SEM exhibited a globular shape of AgNPs, and the particle size ranged from 25 to 100 nm, while the XRD particle size calculation was 25 nm with cubic phase lattice. The antibacterial activity was tested against Gram‐positive and ‐negative bacteria showed an inhibition zone of 16–27 mm and the antibacterial activity tested for the same bacteria after storage for about 10 months showed an inhibition zone of 6–10 mm.

A review of the fate of engineered nanomaterials in municipal solid waste streams

Significant knowledge and data gaps associated with the fate of product-embedded engineered nanomaterials (ENMs) in waste management processes exist that limit our current ability to develop appropriate end-of-life management strategies. This review paper was developed as part of the activities of the IWWG ENMs in Waste Task Group. The specific objectives of this review paper are to assess the current knowledge associated with the fate of ENMs in commonly used waste management processes, including key processes and mechanisms associated with ENM fate and transport in each waste management process, and to use that information to identify the data gaps and research needs in this area. Literature associated with the fate of ENMs in wastes was reviewed and summarized. Overall, results from this literature review indicate a need for continued research in this area. No work has been conducted to quantify ENMs present in discarded materials and an understanding of ENM release from consumer products under conditions representative of those found in relevant waste management process is needed. Results also indicate that significant knowledge gaps associated with ENM behaviour exist for each waste management process investigated. There is a need for additional research investigating the fate of different types of ENMs at larger concentration ranges with different surface chemistries. Understanding how changes in treatment process operation may influence ENM fate is also needed. A series of specific research questions associated with the fate of ENMs during the management of ENM-containing wastes have been identified and used to direct future research in this area.

Critical physiological factors influencing the outcome of antimicrobial testing according to ISO 22196 / JIS Z 2801

Bactericidal materials gained interest in the health care sector as they are capable of preventing material surfaces from microbial colonization and subsequent spread of infections. However, commercialization of antimicrobial materials requires proof of their efficacy, which is usually done using in vitro methods. The ISO 22196 standard (Japanese test method JIS Z 2801) is a method for measuring the antibacterial activity of daily goods. As it was found reliable for testing the biocidal activity of antimicrobially active materials and surface coatings most of the laboratories participating in this study used this protocol. Therefore, a round robin test for evaluating antimicrobially active biomaterials had to be established. To our knowledge, this is the first report on inaugurating a round robin test for the ISO 22196 / JIS Z 2801. The first round of testing showed that analyses in the different laboratories yielded different results, especially for materials with intermediate antibacterial effects distinctly different efficacies were noted. Scrutinizing the protocols used by the different participants and identifying the factors influencing the test outcomes the approach was unified. Four critical factors influencing the outcome of antibacterial testing were identified in a series of experiments: (1) incubation time, (2) bacteria starting concentration, (3) physiological state of bacteria (stationary or exponential phase of growth), and (4) nutrient concentration. To our knowledge, this is the first time these parameters have been analyzed for their effect on the outcome of testing according to ISO 22196 / JIS Z 2801. In conclusion, to enable assessment of the results obtained it is necessary to evaluate these single parameters in the test protocol carefully. Furthermore, uniform and robust definitions of the terms antibacterial efficacy / activity, bacteriostatic effects, and bactericidal action need to be agreed upon to simplify communication of results and also regulate expectations regarding antimicrobial tests, outcomes, and materials.

Characterization and antimicrobial efficacy of Portland cement impregnated with silver nanoparticles

PURPOSE

This study investigated the effects of silver nanoparticle (SN) loading into hydraulic calcium silicate-based Portland cement on its mechanical, antibacterial behavior and biocompatibility as a novel dental bone substitute.

MATERIALS AND METHODS

Chemically reduced colloidal SN were combined with Portland cement (PC) by the concentrations of 0 (control), 1.0, 3.0, and 5.0 wt%. The physico-mechanical properties of silver-Portland cement nanocomposites (SPNC) were investigated through X-ray diffraction (XRD), setting time, compressive strength, solubility, and silver ion elution. Antimicrobial properties of SPNC were tested by agar diffusion against Streptococcus mutans and Streptococcus sobrinus. Cytotoxic evaluation for human gingival fibroblast (HGF) was performed by MTS assay.

RESULTS

XRD certified that SN was successfully impregnated in PC. SPNC at above 3.0 wt% significantly reduced both initial and final setting times compared to control PC. No statistical differences of the compressive strength values were detected after SN loadings, and solubility rates of SPNC were below 3.0%, which are acceptable by ADA guidelines. Ag ion elutions from SPNC were confirmed with dose-dependence on the concentrations of SN added. SPNC of 5.0 wt% inhibited the growth of Streptococci, whereas no antimicrobial activity was shown in control PC. SPNC revealed no cytotoxic effects to HGF following ISO 10993 (cell viability > 70%).

CONCLUSION

Addition of SN promoted the antibacterial activity and favored the bio-mechanical properties of PC; thus, SPNC could be a candidate for the futuristic dental biomaterial. For clinical warrant, further studies including the inhibitory mechanism, in vivo and long-term researches are still required.

Nanotechnology in Food Packaging

Food packaging is an integral component of the global food supply chain, protecting food from dirt, chemical contaminants and microorganisms, and helping to maintain food quality during transport and storage. Much of this packaging relies on modern polymeric materials, which have been developed to help control the exposure of products to light, oxygen and moisture. These have the benefits of being lightweight, cost-effective, reusable, recyclable and resistant to chemical and physical damage. Although traditional polymeric materials can fulfill many of these requirements, efforts continue to maintain or improve packaging performance while reducing the use of raw materials, waste and costs. The use of nanotechnology to produce nanocomposite materials has great promise to improve the characteristics of food packaging, but many of the products are still in their infancy. Only a relatively small number of nanoenabled products have entered the market and many, but not all, occupy niche markets. This chapter briefly describes the areas where nanomaterials have been used in research and commercial products to improve mechanical and barrier properties and to create active and intelligent packaging materials. It also addresses the regulation of nanomaterials in food contact applications and migration when evaluating the safety of these materials.

Development of active, nanoparticle, antimicrobial technologies for muscle-based packaging applications

Fresh and processed muscle-based foods are highly perishable food products and packaging plays a crucial role in providing containment so that the full effect of preservation can be achieved through the provision of shelf-life extension. Conventional packaging materials and systems have served the industry well, however, greater demands are being placed upon industrial packaging formats owing to the movement of muscle-based products to increasingly distant markets, as well as increased customer demands for longer product shelf-life and storage capability. Consequently, conventional packaging materials and systems will have to evolve to meet these challenges. This review presents some of the new strategies that have been developed by employing novel nanotechnological concepts which have demonstrated some promise in significantly extending the shelf-life of muscle-based foods by providing commercially-applicable, antimicrobially-active, smart packaging solutions. The primary focus of this paper is applied to subject aspects, such as; material chemistries employed, forming methods utilised, interactions of the packaging functionalities including nanomaterials employed with polymer substrates and how such materials ultimately affect microbes. In order that such materials become industrially feasible, it is important that safe, stable and commercially-viable packaging materials are shown to be producible and effective in order to gain public acceptance, legislative approval and industrial adoption.

Synthesis and potential applications of silver-porous aluminium oxide nanocomposites as prospective antiseptics and bactericides

Alumina micro-spheres with mesoporous structure called porous aluminium oxide (POA) were prepared through a hydrothermal method using Al₂(SO₄)₃·18H₂O followed by a thermal decomposition process. Silver nanocomposites of POA (Ag/POAs) with high biochemical activity were synthesized by sorption of silver nanoparticles in the matrix of POA. Synthesis of Ag/POAs using photochemical reduction enables the producing silver nanoparticles preventing their aggregation. Ag/POAs demonstrated a stronger bactericidal activity than POA. The colony-forming ability of Escherichia coli was completely lost in 1 day on Ag/POAs at silver nanoparticles concentration of 0.241 ppm. Staphylococcus epidermidis displayed higher tolerance to Ag/POAs at all silver nanoparticles concentrations, the growth of Staphylococcus epidermidis was stopped at concentration of 0.374 ppm. The bactericidal activity of Ag/POAs against bacteria in drinking water was found to be highly effective, the growth of bacteria was completely lost in 1 day at silver nanoparticles concentration of 0.108 ppm.

Chemical speciation of silver (Ag) in soils under aerobic and anaerobic conditions: Ag nanoparticles vs. ionic Ag

This study investigated how silver nanoparticles (AgNP) and ionic silver (AgNO₃) undergo phase-transformations in soils under aerobic and anaerobic conditions using extended X-ray absorption fine structure (EXAFS) spectroscopy. After 30 days of aerobic incubation, 88% of AgNP added to the soil remained persistent, whereas AgNO₃ was completely transformed into Ag associated with humus and clay minerals. In the anaerobic soil, 83% of the spiked AgNP was transformed into Ag₂S, accompanied by significant decrease in water- and acid-extractable Ag fractions. About 50% of AgNO₃ spiked to the anaerobic soil underwent transformations into metallic Ag and associations with clay minerals. Oxide (Ag₂O) and carbonate (Ag₂CO₃) forms of Ag were not predominant in aerobic and anaerobic soils. The redox potential of soil had a profound effect on determination of the phase-transformation pathways for AgNP and ionic Ag.

Release of silver nanoparticles from fabrics during the course of sequential washing

Increasing use of silver nanoparticles (AgNPs) in consumer products has raised concerns about the potential impacts of AgNPs on the environment. This study aimed to assess the potential release of AgNPs from textiles due to sequential washing. Different types of fabrics including cotton, polyester (PES), and cotton blended with PES (called TC) were coated with 4-5 nm AgNPs and used in the sequential washing experiments with Milli-Q water at neutral pH and with commercial detergent at alkaline pH. Similar experiments were also run-on consumer textile products washed with Milli-Q water. The percent Ag remaining on the products after washing was also investigated. The initial Ag contents ranged from 254 to 350 μg Ag/g of the product in lab-prepared fabrics and from 1.2 to 44 μg Ag/g of the product in consumer products. After 20 wash cycles, 48 to 72 % of Ag was lost from the prepared fabrics washed with Milli-Q water, while a greater loss of 84-94 % of Ag occurred after washing the prepared fabrics with commercial detergent. The Ag released during the washing process is present dominantly in particulate form. In the consumer products after 20 washes with Milli-Q water, the percent Ag remaining was found to be around 46 to 70 %. Statistical analysis of the Ag release rate between consumer products and lab-prepared fabrics in Milli-Q washing water by independent t test showed no significant difference after 20 washing cycles (p > 0.05).

Nanoparticles for Tendon Healing and Regeneration: Literature Review

Tendon injuries are commonly met in the emergency department. Unfortunately, tendon tissue has limited regeneration potential and usually the consequent formation of scar tissue causes inferior mechanical properties. Nanoparticles could be used in different way to improve tendon healing and regeneration, ranging from scaffolds manufacturing (increasing the strength and endurance or anti-adhesions, anti-microbial, and anti-inflammatory properties) to gene therapy. This paper aims to summarize the most relevant studies showing the potential application of nanoparticles for tendon tissue regeneration.

Environmental behavior of engineered nanomaterials in porous media: a review

A pronounced increase in the use of nanotechnology has resulted in nanomaterials being released into the environment. Environmental exposure to the most common engineered nanomaterials (ENMs), such as carbon-based and metal-based nanomaterials, can occur directly via intentional injection for remediation purposes, release during the use of nanomaterial-containing consumer goods, or indirectly via different routes. Recent reviews have outlined potential risks assessments, toxicity, and life cycle analyses regarding ENM emission. In this review, inevitable release of ENMs and their environmental behaviors in aqueous porous media are discussed with an emphasis on influencing factors, including the physicochemical properties of ENMs, solution chemistry, soil hydraulic properties, and soil matrices. Major findings of laboratory column studies and numerical approaches for the transport of ENMs are addressed, and studies on the interaction between ENMs and heavy metal ions in aqueous soil environments are examined. Future research is also presented with specific research directions and outlooks.

Nanotechnology in Textiles

Increasing customer demand for durable and functional apparel manufactured in a sustainable manner has created an opportunity for nanomaterials to be integrated into textile substrates. Nanomoieties can induce stain repellence, wrinkle-freeness, static elimination, and electrical conductivity to fibers without compromising their comfort and flexibility. Nanomaterials also offer a wider application potential to create connected garments that can sense and respond to external stimuli via electrical, color, or physiological signals. This review discusses electronic and photonic nanotechnologies that are integrated with textiles and shows their applications in displays, sensing, and drug release within the context of performance, durability, and connectivity. Risk factors including nanotoxicity, nanomaterial release during washing, and environmental impact of nanotextiles based on life cycle assessments have been evaluated. This review also provides an analysis of nanotechnology consolidation in the textiles market to evaluate global trends and patent coverage, supplemented by case studies of commercial products. Perceived limitations of nanotechnology in the textile industry and future directions are identified.

Pre-treatment and conditioning of chabazites followed by functionalization for making suitable additives used in antimicrobial ultra-fine powder coated surfaces

Durability of functionalized chabazite containing ultrafine powder coated surface.

Supercritical carbon dioxide design strategies: from drug carriers to soft killers

The integrated use of supercritical carbon dioxide (scCO(2)) and micro- and nanotechnologies has enabled new sustainable strategies for the manufacturing of new medications. 'Green' scCO(2)-based methodologies are well suited to improve either the synthesis or materials processing leading to the assembly of three-dimensional multifunctional constructs. By using scCO(2) either as C1 feedstock or as solvent, simple, economic, efficient and clean routes can be designed to synthesize materials with unique properties such as polyurea dendrimers and oxazoline-based polymers/oligomers. These new biocompatible, biodegradable and water-soluble polymeric materials can be engineered into multifunctional constructs with antimicrobial activity, targeting moieties, labelling units and/or efficiently loaded with therapeutics. This mini-review highlights the particular features exhibited by these materials resulting directly from the followed supercritical routes.

Silver nanoparticles temporarily retard NO2 - production without significantly affecting N2 O release by Nitrosomonas europaea

Nitrifying bacteria are highly susceptible to silver nanoparticles (AgNPs). However, the effect of sublethal exposure to AgNPs after their release of nitrogenous compounds of environmental concern (e.g., the greenhouse gas nitrous oxide [N2 O] and the common water pollutant nitrite [NO2 -]) has not been systematically investigated. The present study reports the effect of AgNPs (and potentially released silver ions [Ag(+) ]) on NO2 - and N2 O production by Nitrosomonas europaea, and on the transcription of the associated genes. The release of NO2 - was more negatively affected than the production of N2 O. For example, exposure to AgNPs at 0.075 mg/L temporarily enhanced N2 O production (by 12%) without affecting nitrite release, whereas higher AgNP concentrations (>0.25 mg/L) inhibited NO2 - release (by >12%) but not N2 O production. Transcriptomic analyses corroborated these trends; AgNPs at 0.075 mg/L increased the expression of the nitric oxide reductase gene (norQ) associated with N2 O production (by 5.3-fold to 12.8-fold), whereas both 0.075 mg/L of Ag(+) and 0.75 mg/L of AgNPs down-regulated the ammonia monooxygenase gene (amoA2; by 0.08-fold to 0.15-fold and 0.32-fold to 0.64-fold, respectively), the nitrite reductase gene (nirK; by 0.01-fold to 0.02-fold and 0.22-fold to 0.44-fold, respectively), and norQ (by 0.11-fold to 0.15-fold and 0.32-fold to 0.57-fold, respectively). These results suggest that AgNP release to sewage treatment plants and land application of AgNP-containing biosolids should be minimized because of their potential temporary stimulation of N2 O release and interference with nitrification. Environ Toxicol Chem 2015;34:2231-2235. © 2015 SETAC.

Synthesis and characterization of a polyurethane ionene/zinc chloride complex with antibacterial properties

Antibacterial polyurethane ionene/zinc chloride complexes were synthesized and their properties were systematically investigated.

Antibacterial effect of silver nanoparticles and the modeling of bacterial growth kinetics using a modified Gompertz model

BACKGROUND

An alternative to conventional antibiotics is needed to fight against emerging multiple drug resistant pathogenic bacteria. In this endeavor, the effect of silver nanoparticle (Ag-NP) has been studied quantitatively on two common pathogenic bacteria Escherichia coli and Staphylococcus aureus, and the growth curves were modeled.

METHODS

The effect of Ag-NP on bacterial growth kinetics was studied by measuring the optical density, and was fitted by non-linear regression using the Logistic and modified Gompertz models. Scanning Electron Microscopy and fluorescence microscopy were used to study the morphological changes of the bacterial cells. Generation of reactive oxygen species for Ag-NP treated cells were measured by fluorescence emission spectra.

RESULTS

The modified Gompertz model, incorporating cell death, fits the observed data better than the Logistic model. With increasing concentration of Ag-NP, the growth kinetics of both bacteria shows a decline in growth rate with simultaneous enhancement of death rate constants. The duration of the lag phase was found to increase with Ag-NP concentration. SEM showed morphological changes, while fluorescence microscopy using DAPI showed compaction of DNA for Ag-NP-treated bacterial cells.

CONCLUSIONS

E. coli was found to be more susceptible to Ag-NP as compared to S. aureus. The modified Gompertz model, using a death term, was found to be useful in explaining the non-monotonic nature of the growth curve.

GENERAL SIGNIFICANCE

The modified Gompertz model derived here is of general nature and can be used to study any microbial growth kinetics under the influence of antimicrobial agents.

Presence of nanoparticles in wash water from conventional silver and nano-silver textiles

Questions about how to regulate nanoenhanced products regularly arise as researchers determine possible nanoparticle transformation(s). Focusing concern on the incorporation and subsequent release of nano-Ag in fabrics often overshadows the fact that many "conventional silver" antimicrobials such as ionic silver, AgCl, metallic Ag, and other forms will also form different species of silver. In this study we used a laboratory washing machine to simulate the household laundering of a number of textiles prepared with known conventional Ag or nano-Ag treatments and a commercially available fabric incorporating yarns coated with bulk metallic Ag. Serial filtration allowed for quantification of total Ag released in various size fractions (>0.45 μm, < 0.45 μm, <0.1 μm, and <10 kDa), while characterization of particles with TEM/EDX provided insight on Ag transformation mechanisms. Most conventional Ag additives yielded more total Ag and more nanoparticulate-sized Ag in the washing liquid than fabrics that used nano-Ag treatments. Incorporating nano-silver into the fiber (as opposed to surface treatments) yielded less total Ag during fabric washing. A variety of metallic Ag, AgCl, and Ag/S particles were observed in washing solution by TEM/EDX to various extents depending on the initial Ag speciation in the fabrics. Very similar particles were also observed when dissolved ionic Ag was added directly into the washing liquid. On the basis of the present study, we can state that all silver-treated textiles, regardless of whether the treatment is "conventional" or "nano", can be a source of silver nanoparticles in washing solution when laundering fabrics. Indeed, in this study we observed that textiles treated with "conventional" silver have equal or greater propensity to form nano-silver particles during washing conditions than those treated with "nano"-silver. This fact needs to be strongly considered when addressing the risks of nano-silver and emphasizes that regulatory assessment of nano-silver warrants a similar approach to conventional silver.