The Estimation of Second-Generation HR-pQCT From First-Generation HR-pQCT Using In Vivo Cross-Calibration

Homogenized finite element analysis of distal tibia sections: Achievements and limitations

High-resolution peripheral quantitative computed tomography (HR-pQCT) based micro-finite element (μFE) analysis allows accurate prediction of stiffness and ultimate load of standardised (∼1 cm) distal radius and tibia sections. An alternative homogenized finite element method (hFE) was recently validated to compute the ultimate load of larger (∼2 cm) distal radius sections that include Colles' fracture sites. Since the mechanical integrity of the weight-bearing distal tibia is gaining clinical interest, it has been shown that the same properties can be used to predict the strength of both distal segments of the radius and the tibia. Despite the capacity of hFE to predict structural properties of distal segments of the radius and the tibia, the limitations of such homogenization scheme remain unclear. Therefore, the objective of this study is to build a complete mechanical data set of the compressive behavior of distal segments of the tibia and to compare quantitatively the structural properties with the hFE predictions. As a further aim, it is intended to verify whether hFE is also able to capture the post-yield strain localisation or fracture zones in such a bone section, despite the absence of strain softening in the constitutive model. Twenty-five fresh-frozen distal parts of tibias of human donors were used in this study. Sections were cut corresponding to an in-house triple-stack protocol HR-pQCT scan, lapped, and scanned using micro computed tomography (μCT). The sections were tested in compression until failure, unloaded and scanned again in μCT. Volumetric bone mineral density (vBMD) and bone mineral content (BMC) were correlated to compression test results. hFE analysis was performed in order to compare computational predictions (stiffness, yield load and plastic deformation field pattern) with the compressive experiment. Namely, strain localization was assessed based on digital volume correlation (DVC) results and qualitatively compared to hFE predictions by comparing mid-slices patterns. Bone mineral content (BMC) showed a good correlation with stiffness (R2 = 0.92) and yield (R2 = 0.88). Structural parameters also showed good agreement between the experiment and hFE for both stiffness (R2 = 0.96, slope = 1.05 with 95 % CI [0.97, 1.14]) and yield (R2 = 0.95, slope = 1.04 [0.94, 1.13]). The qualitative comparison between hFE and DVC strain localization patterns allowed the classification of the samples into 3 categories: bad (15 sections), semi (8), and good agreement (2). The good correlations between BMC or hFE and experiment for structural parameters were similar to those obtained previously for the distal part of the radius. The failure zones determined by hFE corresponded to registration only in 8 % of the cases. We attribute these discrepancies to local elastic/plastic buckling effects that are not captured by the continuum-based FE approach exempt from strain softening. A way to improve strain localization hFE prediction would be to use longer distal segments with intact cortical shells, as done for the radius. To conclude, the used hFE scheme captures the elastic and yield response of the tibia sections reliably but not the subsequent failure process.

Transferability of bone phenotyping and fracture risk assessment by μFRAC from first-generation high-resolution peripheral quantitative computed tomography to second-generation scan data

INTRODUCTION

The continued development of high-resolution peripheral quantitative computed tomography (HR-pQCT) has led to a second-generation scanner with higher resolution and longer scan region. However, large multicenter prospective cohorts were collected with first-generation HR-pQCT and have been used to develop bone phenotyping and fracture risk prediction (μFRAC) models. This study establishes whether there is sufficient universality of these first-generation trained models for use with second-generation scan data.

METHODS

HR-pQCT data were collected for a cohort of 60 individuals, who had been scanned on both first- and second-generation scanners on the same day to establish the universality of the HR-pQCT models. These data were each used as input to first-generation trained bone microarchitecture models for bone phenotyping and fracture risk prediction, and their outputs were compared for each study participant. Reproducibility of the models were assessed using same-day repeat scans obtained from first-generation (n = 37) and second-generation (n = 74) scanners.

RESULTS

Across scanner generations, the bone phenotyping model performed with an accuracy of 93.1%. Similarly, the 5-year fracture risk assessment by μFRAC was well correlated with a Pearson's (r) correlation coefficient of r > 0.83 for the three variations of μFRAC (varying inclusion of clinical risk factors, finite element analysis, and dual X-ray absorptiometry). The first-generation reproducibility cohort performed with an accuracy for categorical assignment of 100% (bone phenotyping) and a correlation coefficient of 0.99 (μFRAC), whereas the second-generation reproducibility cohort performed with an accuracy of 96.4% (bone phenotyping) and a correlation coefficient of 0.99 (μFRAC).

CONCLUSION

We demonstrated that bone microarchitecture models trained using first-generation scan data generalize well to second-generation scans, performing with a high level of accuracy and reproducibility. Less than 4% of individuals' estimated fracture risk led to a change in treatment threshold, and in general, these dissimilar outcomes using second-generation data tended to be more conservative.

Comparison of Motion Grading in 1,000 Patients by First- and Second-Generation HR-pQCT: A Propensity Score Matched Cohort Study

In-vivo bone microstructure measured by high-resolution peripheral quantitative computed tomography (HR-pQCT) is gaining importance in research and clinical practice. Second-generation HR-pQCT (XCT2) shows improved image quality and shorter measurement duration compared to the first generation (XCT1). Predicting and understanding the occurrence of motion artifacts is crucial for clinical practice. We retrospectively analyzed data from HR-pQCT measurements at the distal radius and tibia of 1,000 patients (aged 20 to 89) evenly distributed between both generations of HR-pQCT. Motion artifacts were graded between 1 (no motion) and 5 (severe motion), with grades greater 3 considered unusable. Additionally, baseline characteristics and patients' muscle performance and balance were measured. Various group comparisons between the two generations of HR-pQCT and regression analyses between patient characteristics and motion grading were performed. The study groups of XCT1 and XCT2 did not differ by age (XCT1: 64.9 vs. XCT2: 63.8 years, p = 0.136), sex (both 74.5% females, p > 0.999), or BMI (both 24.2 kg/m2, p = 0.911) after propensity score matching. XCT2 scans exhibited significantly lower motion grading in both extremities compared to XCT1 (Radius: p < 0.001; Tibia: p = 0.002). In XCT2 motion-corrupted scans were more than halved at the radius (XCT1: 35.3% vs. XCT2: 15.5%, p < 0.001), and at the tibia the frequency of best image quality scans was increased (XCT1: 50.2% vs. XCT2: 63.7%, p < 0.001). The strongest independent predictor for motion-corrupted images is the occurrence of high motion grading at the other scanning site during the same consultation. The association between high motion grading in one scan and a corresponding high motion grading in another scan within the same session suggests a non-resting patient. Additionally, aged, female, and patients with smaller stature tend towards higher motion grading, requiring special attention to a correct extremity fixation.

Recommendations for High-resolution Peripheral Quantitative Computed Tomography Assessment of Bone Density, Microarchitecture, and Strength in Pediatric Populations

PURPOSE OF REVIEW

The purpose of this review is to summarize current approaches and provide recommendations for imaging bone in pediatric populations using high-resolution peripheral quantitative computed tomography (HR-pQCT).

RECENT FINDINGS

Imaging the growing skeleton is challenging and HR-pQCT protocols are not standardized across centers. Adopting a single-imaging protocol for all studies is unrealistic; thus, we present three established protocols for HR-pQCT imaging in children and adolescents and share advantages and disadvantages of each. Limiting protocol variation will enhance the uniformity of results and increase our ability to compare study results between different research groups. We outline special cases along with tips and tricks for acquiring and processing scans to minimize motion artifacts and account for growing bone. The recommendations in this review are intended to help researchers perform HR-pQCT imaging in pediatric populations and extend our collective knowledge of bone structure, architecture, and strength during the growing years.

High-resolution peripheral quantitative computed tomography: research or clinical practice?

High-resolution peripheral quantitative CT (HR-pQCT) is a low-dose three-dimensional imaging technique, originally developed for in vivo assessment of bone microarchitecture at the distal radius and tibia in osteoporosis. HR-pQCT has the ability to discriminate trabecular and cortical bone compartments, providing densitometric and structural parameters. At present, HR-pQCT is mostly used in research settings, despite evidence showing that it may be a valuable tool in osteoporosis and other diseases. This review summarizes the main applications of HR-pQCT and addresses the limitations that currently prevent its integration into routine clinical practice. In particular, the focus is on the use of HR-pQCT in primary and secondary osteoporosis, chronic kidney disease (CKD), endocrine disorders affecting bone, and rare diseases. A section on novel potential applications of HR-pQCT is also present, including assessment of rheumatic diseases, knee osteoarthritis, distal radius/scaphoid fractures, vascular calcifications, effect of medications, and skeletal muscle. The reviewed literature seems to suggest that a more widespread implementation of HR-pQCT in clinical practice would offer notable opportunities. For instance, HR-pQCT can improve the prediction of incident fractures beyond areal bone mineral density provided by dual-energy X-ray absorptiometry. In addition, HR-pQCT may be used for the monitoring of anti-osteoporotic therapy or for the assessment of mineral and bone disorder associated with CKD. Nevertheless, several obstacles currently prevent a broader use of HR-pQCT and would need to be targeted, such as the small number of installed machines worldwide, the uncertain cost-effectiveness, the need for improved reproducibility, and the limited availability of reference normative data sets.

Comparison of Bone Quality Among Winter Endurance Athletes with and Without Risk Factors for Relative Energy Deficiency in Sport (REDs): A Cross-Sectional Study

Relative Energy Deficiency in Sport (REDs) is a syndrome describing the relationship between prolonged and/or severe low energy availability and negative health and performance outcomes. The high energy expenditures incurred during training and competition put endurance athletes at risk of REDs. The objective of this study was to investigate differences in bone quality in winter endurance athletes classified as either low-risk versus at-risk for REDs. Forty-four participants were recruited (M = 18; F = 26). Bone quality was assessed at the distal radius and tibia using high resolution peripheral quantitative computed tomography (HR-pQCT), and at the hip and spine using dual X-ray absorptiometry (DXA). Finite element analysis was used to estimate bone strength. Participants were grouped using modified criteria from the REDs Clinical Assessment Tool Version 1. Fourteen participants (M = 3; F = 11), were classified as at-risk of REDs (≥ 3 risk factors). Measured with HR-pQCT, cortical bone area (radius) and bone strength (radius and tibia) were 6.8%, 13.1% and 10.3% lower (p = 0.025, p = 0.033, p = 0.027) respectively, in at-risk compared with low-risk participants. Using DXA, femoral neck areal bone density was 9.4% lower in at-risk compared with low-risk participants (p = 0.005). At-risk male participants had 21.9% lower femoral neck areal bone density (via DXA) than low-risk males (p = 0.020) with no significant differences in females. Overall, 33.3% of athletes were at-risk for REDs and had lower bone quality than those at low-risk.

A Fracture Risk Assessment Tool for High Resolution Peripheral Quantitative Computed Tomography

Most fracture risk assessment tools use clinical risk factors combined with bone mineral density (BMD) to improve assessment of osteoporosis; however, stratifying fracture risk remains challenging. This study developed a fracture risk assessment tool that uses information about volumetric bone density and three-dimensional structure, obtained using high-resolution peripheral quantitative compute tomography (HR-pQCT), to provide an alternative approach for patient-specific assessment of fracture risk. Using an international prospective cohort of older adults (n = 6802) we developed a tool to predict osteoporotic fracture risk, called μFRAC. The model was constructed using random survival forests, and input predictors included HR-pQCT parameters summarizing BMD and microarchitecture alongside clinical risk factors (sex, age, height, weight, and prior adulthood fracture) and femoral neck areal BMD (FN aBMD). The performance of μFRAC was compared to the Fracture Risk Assessment Tool (FRAX) and a reference model built using FN aBMD and clinical covariates. μFRAC was predictive of osteoporotic fracture (c-index = 0.673, p < 0.001), modestly outperforming FRAX and FN aBMD models (c-index = 0.617 and 0.636, respectively). Removal of FN aBMD and all clinical risk factors, except age, from μFRAC did not significantly impact its performance when estimating 5-year and 10-year fracture risk. The performance of μFRAC improved when only major osteoporotic fractures were considered (c-index = 0.733, p < 0.001). We developed a personalized fracture risk assessment tool based on HR-pQCT that may provide an alternative approach to current clinical methods by leveraging direct measures of bone density and structure. © 2023 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).

A Laplace-Hamming Binarization Approach for Second-Generation HR-pQCT Rescues Fine Feature Segmentation

Although second-generation high-resolution peripheral quantitative computed tomography (XCTII) provides the highest-resolution in vivo bone microstructure assessment, the manufacturer's standard image processing protocol omits fine features in both trabecular and cortical compartments. To optimize fine structure segmentation, we implemented a binarization approach based on a Laplace-Hamming (LH) segmentation and documented the reproducibility and accuracy of XCTII structure segmentation using both the standard Gaussian-based binarization and the proposed LH segmentation approach. To evaluate reproducibility, 20 volunteers (9 women, 11 men; aged 23-75 years) were recruited, and three repeat scans of the radii and tibias were acquired using the manufacturer's standard in vivo protocol. To evaluate accuracy, cadaveric structure phantoms (14 radii, 6 tibias) were scanned on XCTII using the same standard in vivo protocol and on μCT at 24.5 μm resolution. XCTII images were analyzed twice-first, with the manufacturer's standard patient evaluation protocol and, second, with the proposed LH segmentation approach. The LH approach rescued fine features evident in the grayscale images but omitted or overrepresented (thickened) by the standard approach. The LH approach significantly reduced error in trabecular volume fraction (BV/TV) and thickness (Tb.Th) compared with the standard approach; however, higher error was introduced for trabecular separation (Tb.Sp). The LH approach improved the correlation between XCTII and μCT for cortical porosity (Ct.Po) and significantly reduced error in cortical pore diameter (Ct.Po.Dm) compared with the standard approach. The LH approach resulted in improved precision compared with the standard approach for BV/TV, Tb.Th, Ct.Po, and Ct.Po.Dm at the radius and for Ct.Po at the tibia. Our results suggest that the proposed LH approach produces substantially improved binary masks, reduces proportional bias, and provides greater accuracy and reproducibility in important outcome metrics, all due to more accurate segmentation of the fine features in both trabecular and cortical compartments. © 2023 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).

Precision of bone mechanoregulation assessment in humans using longitudinal high-resolution peripheral quantitative computed tomography in vivo

Local mechanical stimuli in the bone microenvironment are essential for the homeostasis and adaptation of the skeleton, with evidence suggesting that disruption of the mechanically-driven bone remodelling process may lead to bone loss. Longitudinal clinical studies have shown the combined use of high-resolution peripheral quantitative computed tomography (HR-pQCT) and micro-finite element analysis can be used to measure load-driven bone remodelling in vivo; however, quantitative markers of bone mechanoregulation and the precision of these analyses methods have not been validated in human subjects. Therefore, this study utilised participants from two cohorts. A same-day cohort (n = 33) was used to develop a filtering strategy to minimise false detections of bone remodelling sites caused by noise and motion artefacts present in HR-pQCT scans. A longitudinal cohort (n = 19) was used to develop bone imaging markers of trabecular bone mechanoregulation and characterise the precision for detecting longitudinal changes in subjects. Specifically, we described local load-driven formation and resorption sites independently using patient-specific odds ratios (OR) and 99 % confidence intervals. Conditional probability curves were computed to link the mechanical environment to the remodelling events detected on the bone surface. To quantify overall mechanoregulation, we calculated a correct classification rate measuring the fraction of remodelling events correctly identified by the mechanical signal. Precision was calculated as root-mean-squared averages of the coefficient of variation (RMS-SD) of repeated measurements using scan-rescan pairs at baseline combined with a one-year follow-up scan. We found no significant mean difference (p < 0.01) between scan-rescan conditional probabilities. RMS-SD was 10.5 % for resorption odds, 6.3 % for formation odds, and 1.3 % for correct classification rates. Bone was most likely to be formed in high-strain and resorbed in low-strain regions for all participants, indicating a consistent, regulated response to mechanical stimuli. For each percent increase in strain, the likelihood of bone resorption decreased by 2.0 ± 0.2 %, and the likelihood of bone formation increased by 1.9 ± 0.2 %, totalling 38.3 ± 1.1 % of strain-driven remodelling events across the entire trabecular compartment. This work provides novel robust bone mechanoregulation markers and their precision for designing future clinical studies.

Cross-Calibration of iDXA and pQCT Scanners at Rural and Urban Research Sites in The Gambia, West Africa

Between-scanner differences in measures of bone and body composition can obscure or exaggerate physiological differences in multi-site studies or the magnitude of changes in longitudinal studies. We conducted a cross-calibration study at two bone imaging centres in The Gambia, West Africa where DXA (dual-energy X-ray absorptiometry) and pQCT (peripheral Quantitative-Computed Tomography) are routinely used. Repeat scans were obtained from 64 Gambian adults (58% Male) aged Mean(SD) 30.9 (13.5) years with Mean(SD) body mass index (BMI) 21.7 (4.0) kg/m², using DXA (GE Lunar iDXA, whole body [WB], total hip [TH], lumbar spine [LS]) and pQCT (Stratec XCT2000L/XCT2000, tibia 4%, 50% sites). Between-scanner differences were tested using paired t tests (p < 0.05). Between-scanner correlation was explored with linear regression, and cross-calibration equations derived. Bland-Altman analysis investigated machine trend/bias. When differences were detected (p < 0.05), cross-calibration equations were applied to urban values, with t tests and Bland Altman analysis repeated. Between-scanner differences exceeded the predefined level of statistical significance (p < 0.05) for WB aBMD and BA; all pQCT measures vBMD, BMC, cortical cross-sectional area (CSA) and stress-strain index (SSI). Between-scanner correlation was high (R²:0.92-0.99), except pQCT Mu.Den (R² = 0.51). Bland Altman plots indicated bias increased with increasing BMD. Cross-calibration equations attenuated all between-scanner differences and systematic bias. Cross-calibration, particularly of pQCT scanners, is an important consideration in multi-site studies particularly where between population comparisons are intended. Our experiences and findings may be generalisable to other resource-limited settings where the logistics of sourcing parts and in-country repair may result in lengthy scanner downtime.

Automatic segmentation of trabecular and cortical compartments in HR-pQCT images using an embedding-predicting U-Net and morphological post-processing

High-resolution peripheral quantitative computed tomography (HR-pQCT) is an emerging in vivo imaging modality for quantification of bone microarchitecture. However, extraction of quantitative microarchitectural parameters from HR-pQCT images requires an accurate segmentation of the image. The current standard protocol using semi-automated contouring for HR-pQCT image segmentation is laborious, introduces inter-operator biases into research data, and poses a barrier to streamlined clinical implementation. In this work, we propose and validate a fully automated algorithm for segmentation of HR-pQCT radius and tibia images. A multi-slice 2D U-Net produces initial segmentation predictions, which are post-processed via a sequence of traditional morphological image filters. The U-Net was trained on a large dataset containing 1822 images from 896 unique participants. Predicted segmentations were compared to reference segmentations on a disjoint dataset containing 386 images from 190 unique participants, and 156 pairs of repeated images were used to compare the precision of the novel and current protocols. The agreement of morphological parameters obtained using the predicted segmentation relative to the reference standard was excellent (R² between 0.938 and > 0.999). Precision was significantly improved for several outputs, most notably cortical porosity. This novel and robust algorithm for automated segmentation will increase the feasibility of using HR-pQCT in research and clinical settings.

Meta-analysis of Diabetes Mellitus-Associated Differences in Bone Structure Assessed by High-Resolution Peripheral Quantitative Computed Tomography

PURPOSE OF REVIEW

Diabetes mellitus is defined by elevated blood glucose levels caused by changes in glucose metabolism and, according to its pathogenesis, is classified into type 1 (T1DM) and type 2 (T2DM) diabetes mellitus. Diabetes mellitus is associated with multiple degenerative processes, including structural alterations of the bone and increased fracture risk. High-resolution peripheral computed tomography (HR-pQCT) is a clinically applicable, volumetric imaging technique that unveils bone microarchitecture in vivo. Numerous studies have used HR-pQCT to assess volumetric bone mineral density and microarchitecture in patients with diabetes, including characteristics of trabecular (e.g. number, thickness and separation) and cortical bone (e.g. thickness and porosity). However, study results are heterogeneous given different imaging regions and diverse patient cohorts.

RECENT FINDINGS

This meta-analysis assessed T1DM- and T2DM-associated characteristics of bone microarchitecture measured in human populations in vivo reported in PubMed- and Embase-listed publications from inception (2005) to November 2021. The final dataset contained twelve studies with 516 participants with T2DM and 3067 controls and four studies with 227 participants with T1DM and 405 controls. While T1DM was associated with adverse trabecular characteristics, T2DM was primarily associated with adverse cortical characteristics. These adverse effects were more severe at the radius than the load-bearing tibia, indicating increased mechanical loading may compensate for deleterious bone microarchitecture changes and supporting mechanoregulation of bone fragility in diabetes mellitus. Our meta-analysis revealed distinct predilection sites of bone structure aberrations in T1DM and T2DM, which provide a foundation for the development of animal models of skeletal fragility in diabetes and may explain the uncertainty of predicting bone fragility in diabetic patients using current clinical algorithms.

Hip Fractures in Older Adults Are Associated With the Low Density Bone Phenotype and Heterogeneous Deterioration of Bone Microarchitecture

Femoral neck areal bone mineral density (FN aBMD) is a key determinant of fracture risk in older adults; however, the majority of individuals who have a hip fracture are not considered osteoporotic according to their FN aBMD. This study uses novel tools to investigate the characteristics of bone microarchitecture that underpin bone fragility. Recent hip fracture patients (n = 108, 77% female) were compared with sex- and age-matched controls (n = 216) using high-resolution peripheral quantitative computed tomography (HR-pQCT) imaging of the distal radius and tibia. Standard morphological analysis of bone microarchitecture, micro-finite element analysis, and recently developed techniques to identify void spaces in bone microarchitecture were performed to evaluate differences between hip fracture patients and controls. In addition, a new approach for phenotyping bone microarchitecture was implemented to evaluate whether hip fractures in males and females occur more often in certain bone phenotypes. Overall, hip fracture patients had notable deterioration of bone microarchitecture and reduced bone mineral density compared with controls, especially at weight-bearing sites (tibia and femoral neck). Hip fracture patients were more likely to have void spaces present at either site and had void spaces that were two to four times larger on average when compared with non-fractured controls (p < 0.01). Finally, bone phenotyping revealed that hip fractures were significantly associated with the low density phenotype (p < 0.01), with the majority of patients classified in this phenotype (69%). However, female and male hip fracture populations were distributed differently across the bone phenotype continuum. These findings highlight how HR-pQCT can provide insight into the underlying mechanisms of bone fragility by using information about bone phenotypes and identification of microarchitectural defects (void spaces). The added information suggests that HR-pQCT can have a beneficial role in assessing the severity of structural deterioration in bone that is associated with osteoporotic hip fractures. © 2022 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).

Bone-microarchitecture and bone-strength in a sample of adults with hypophosphatasia and a matched reference population assessed by HR-pQCT and impact microindentation

BACKGROUND

Hypophosphatasia (HPP) is an autosomal recessive or dominate disease affecting bone mineralization, and adults with HPP are in risk to develop metatarsal stress fractures and femoral pseudofractures. Given to the scarce data on the bone quality and its association to the fracture risk in adults with HPP, this study aimed to evaluate bone turnover, bone strength and structure in adults with HPP.

METHODS

In this cross-sectional study, we included 14 adults with genetically verified HPP and 14 sex-, age-, BMI-, and menopausal status-matched reference individuals. We analyzed bone turnover markers, and measured bone material strength index (BMSi) by impact microindentation. Bone geometry, volumetric density and bone microarchitecture as well as failure load at the distal radius and tibia were evaluated using a second-generation high-resolution peripheral quantitative computed tomography system.

RESULTS

Bone turnover markers did not differ between patients with HPP and reference individuals. BMSi did not differ between the groups (67.90 [63.75-76.00] vs 65.45 [58.43-69.55], p = 0.149). Parameters of bone geometry and volumetric density did not differ between adults with HPP and the reference group. Patients with HPP had a tendency toward higher trabecular separation (0.664 [0.613-0.724] mm vs 0.620 [0.578-0.659] mm, p = 0.054) and inhomogeneity of trabecular network (0.253 [0.235-0.283] mm vs 0.229 [0.208-0.252] mm, p = 0.056) as well as lower trabecular bone volume fraction (18.8 [16.4-22.7] % vs 22.8 [20.6-24.7] %, p = 0.054) at the distal radius. In addition, compound heterozygous adults with HPP had a significantly higher cortical porosity at the distal radius than reference individuals (1.5 [0.9-2.2] % vs 0.7 [0.6-0.7] %, p = 0.041).

CONCLUSIONS

BMSi is not reduced in adults with HPP. Increased cortical porosity may contribute to the occurrence of femoral pseudofractures in compound heterozygous adults with HPP. However, further studies investigating larger cohorts of adults with HPP using methods of bone histomorphometry are recommended to adequately assess the bone quality in adults with HPP.

Randomized controlled trial of daily teriparatide, weekly high-dose teriparatide, or bisphosphonate in patients with postmenopausal osteoporosis: The TERABIT study

PURPOSE

The effects of daily teriparatide (20 μg) (D-PTH), weekly high-dose teriparatide (56.5 μg) (W-PTH), or bisphosphonates (BPs) on areal bone mineral density (aBMD), bone turnover markers (BTMs), volumetric BMD (vBMD), microarchitecture, and estimated strength were investigated in postmenopausal osteoporosis patients.

METHODS

The study participants were 131 women with a history of fragility fractures. They were randomized to receive D-PTH, W-PTH, or BPs (alendronate or risedronate) for 18 months. Dual-energy X-ray absorptiometry (DXA), BTMs, and high-resolution peripheral quantitative CT (HR-pQCT) parameters were evaluated at baseline and after 6 and 18 months of treatment. The primary endpoint was the change (%) in cortical thickness (Ct.Th) after 18 months' treatment compared with baseline.

RESULTS

DXA showed that D-PTH, W-PTH, and BPs increased lumbar spine aBMD (+12.0%, +8.5%, and +6.8%) and total hip aBMD (+3.0%, +2.1%, and +3.0%), but D-PTH and W-PTH decreased 1/3 radius aBMD (-4.1%, -3.0%, -1.4%) after 18 months. On HR-pQCT, D-PTH increased trabecular vBMD (Tb.vBMD) at the distal radius and tibia after 18 months (+6.4%, +3.7%) compared with the BPs group, decreased cortical volumetric tissue mineral density (Ct.vTMD) (-1.8%, -0.9%) compared with the other groups, increased Ct.Th (+1.3%, +3.9%), and increased failure load (FL) (+4.7%, +4.4%). W-PTH increased Tb.vBMD (+5.3%, +1.9%), maintained Ct.vTMD (-0.7%, +0.2%) compared with D-PTH, increased Ct.Th (+0.6%, +3.6%), and increased FL (+4.9%, +4.5%). The BPs increased Tb.vBMD only in the radius (+2.0%, +0.2%), maintained Ct.vTMD (-0.6%, +0.3%), increased Ct.Th (+0.5%, +3.4%), and increased FL (+3.9%, +2.8%).

CONCLUSIONS

D-PTH and W-PTH comparably increased Ct.Th, the primary endpoint. D-PTH had a strong effect on trabecular bone. Although D-PTH decreased Ct.vTMD, it increased Ct.Th and total bone strength. W-PTH had a moderate effect on trabecular bone, maintained Ct.vTMD, and increased Ct.Th and total bone strength to the same extent as D-PTH.

Incomplete recovery of bone strength and trabecular microarchitecture at the distal tibia 1 year after return from long duration spaceflight

Determining the extent of bone recovery after prolonged spaceflight is important for understanding risks to astronaut long-term skeletal health. We examined bone strength, density, and microarchitecture in seventeen astronauts (14 males; mean 47 years) using high-resolution peripheral quantitative computed tomography (HR-pQCT; 61 μm). We imaged the tibia and radius before spaceflight, at return to Earth, and after 6- and 12-months recovery and assessed biomarkers of bone turnover and exercise. Twelve months after flight, group median tibia bone strength (F.Load), total, cortical, and trabecular bone mineral density (BMD), trabecular bone volume fraction and thickness remained − 0.9% to − 2.1% reduced compared with pre-flight (p ≤ 0.001). Astronauts on longer missions (> 6-months) had poorer bone recovery. For example, F.Load recovered by 12-months post-flight in astronauts on shorter (< 6-months; − 0.4% median deficit) but not longer (− 3.9%) missions. Similar disparities were noted for total, trabecular, and cortical BMD. Altogether, nine of 17 astronauts did not fully recover tibia total BMD after 12-months. Astronauts with incomplete recovery had higher biomarkers of bone turnover compared with astronauts whose bone recovered. Study findings suggest incomplete recovery of bone strength, density, and trabecular microarchitecture at the weight-bearing tibia, commensurate with a decade or more of terrestrial age-related bone loss.

M. Assessment of trabecular and cortical parameters using high-resolution peripheral quantitative computed tomography, histomorphometry and microCT of iliac crest bone core in hemodialysis patients

Patients with end-stage renal disease develop changes in bone quality and quantity, which can be assessed using different methods. This study aimed to compare and to correlate bone parameters obtained in vivo using high-resolution peripheral quantitative computed tomography (HR-pQCT) with those obtained by bone biopsy using histomorphometry and microcomputed tomography (microCT) analysis of the iliac crest core, and to evaluate if HR-pQCT is helpful in aiding with categorization of those with high turnover. Twenty hemodialysis patients, 13 females (7 postmenopausal), underwent bone biopsy from 2018 to 2020. The mean age was 48.5 ± 10.6 years, and the mean hemodialysis vintage was 15 years. Histomorphometry identified mineralization defects, low turnover, and high turnover in 65%, 45%, and 35% of the patients, respectively. The highest values of trabecular bone volume (BV/TV) were obtained by histomorphometry, while the highest values of cortical thickness (Ct.Th) were obtained by HR-pQCT at the distal tibia. Moderate correlations were found between BV/TV values obtained by microCT of the bone core and HR-pQCT at the distal radius (r = 0.531, p = 0.016) and at the distal tibia (r = 0.536, p = 0.015). BV/TV values obtained from the bone core by histomorphometry and microCT were also significantly correlated (r = 0.475, p = 0.04). Regarding Ct.Th, there was a strong correlation between the radius and tibia HR-pQCT (r = 0.800, p < 0.001), between bone core microCT and the distal radius HR-pQCT (r = 0.610, p < 0.01), as between histomorphometry and microCT (r = 0.899, p < 0.01). In groups classified by bone turnover, patients with high turnover presented lower BV/TV, Tb.N, Tb.Th, and Ct.Th than those with low turnover in peripheral sites using HR-pQCT. By this method, it was possible to identify low turnover from tibia BV/TV > 12,4% plus Tb.Sp ≤ 0.667 mm (AUC 0.810, 95% CI 0.575 to 0.948) and high turnover from total bone mineral density (BMD) ≤ 154.2 mg HA/cm³ (AUC 0.860, 95% CI 0.633 to 0.982, p < 0.001) and cortical BMD ≤ 691.6 mg HA/cm³ (AUC 0.840, 95% CI 0.609 to 0.963, p < 0.001). In conclusion, HR-pQCT had significant correlation with iliac crest bone in BV/TV and Ct.Th, which are known to provide bone strength. This method is quick and non-invasive and may be helpful in categorizing those with high versus low turnover in hemodialysis patients.

•

Bone structure in hemodialysis patients can be assessed using different methods.

•

There was correlation of BV/TV and Ct.Th between histomorphometry and bone core microCT.

•

BV/TV and Ct.Th values obtained by radius HR-pQCT and bone core microCT were correlated.

•

High turnover patients had lower BV/TV, Tb.N, Tb.Th, and Ct.Th by HR-pQCT.

•

HR-pQCT was able to discriminate low and high turnover in hemodialysis patients.

Adaptive local thresholding can enhance the accuracy of HR-pQCT-based trabecular bone morphology assessment

High-resolution peripheral quantitative computed tomography (HR-pQCT) devices can scan extremities at bone microstructural level in vivo and are used mainly in research of bone diseases. Two HR-pQCT scanners are commercially available to date: XtremeCT (first generation) and XtremeCT-II (second generation) from Scanco Medical AG (Switzerland). Recently, we have proposed an adaptive local thresholding (AT) technique and showed that it can improve quantification accuracy of bone microstructural parameters, with visually less sharp cone-beam CT (CBCT) images providing a similar accuracy than XtremeCT. The aim of this study was to evaluate whether the AT segmentation technique could enhance the accuracy of HR-pQCT in quantifying bone microstructural images and to assess whether the agreement between XtremeCT and XtremeCT-II could be improved. Nineteen radii were scanned with three scanners from Scanco Medical AG: (1) XtremeCT at 82 μm, (2) XtremeCT-II at 60.7 μm and (3) the small animal microCT scanner VivaCT40 at 19 μm voxel size. The scans were segmented applying two different methods, once following the manufacturer standard technique (ST), and once by means of AT. Three-dimensional (3D) morphological analysis was performed on the trabecular volume of the segmented images using the manufacturer's standard software to calculate bone volume fraction (BV/TV), trabecular thickness (Tb.Th), separation (Tb.Sp) and number (Tb.N). The average accuracy of XtremeCT improved from R² = 0.76 (ST) to 0.85 (AT) and reached the same level of accuracy as XtremeCT-II with ST (R² = 0.86). The largest improvements were obtained for BV/TV and Tb.Th. For XtremeCT-II, mean accuracy improved slightly from R² = 0.86 (ST) to 0.89 (AT). For both segmentations and both scanners, the standard section was quantified slightly more accurate than the subchondral section. The agreement between the scanners was enhanced from R² = 0.89 (ST) to 0.98 (AT). In conclusion, AT can enhance the accuracy of XtremeCT to quantify distal radius bone microstructural parameters close to XtremeCT-II level and increases the agreement between the two HR-pQCT scanners. High-resolution peripheral quantitative computed tomography, segmentation, bone microstructural parameters.

Influence of loading conditions in finite element analysis assessed by HR-pQCT on ex vivo fracture prediction

Many fractures occur in individuals with normal areal Bone Mineral Density (aBMD) measured by Dual X-ray Absorptiometry (DXA). High Resolution peripheral Quantitative Computed Tomography (HR-pQCT) allows for non-invasive evaluation of bone stiffness and strength through micro finite element (μFE) analysis at the tibia and radius. These μFE outcomes are strongly associated with fragility fractures but do not provide clear enhancement compared with DXA measurements. The objective of this study was to establish whether a change in loading conditions in standard μFE analysis assessed by HR-pQCT enhance the discrimination of low-trauma fractured radii (n = 11) from non-fractured radii (n = 16) obtained experimentally throughout a mechanical test reproducing a forward fall. Micro finite element models were created using HR-pQCT images, and linear analyses were performed using four different types of loading conditions (axial, non-axial with two orientations and torsion). No significant differences were found between the failure load assessed with the axial and non-axial models. The different loading conditions tested presented the same area under the receiver operating characteristic (ROC) curves of 0.79 when classifying radius fractures with an accuracy of 81.5%. In comparison, the area under the curve (AUC) is 0.77 from DXA-derived ultra-distal aBMD of the forearm with an accuracy of 85.2%. These results suggest that the restricted HR-pQCT scanned region seems not sensitive to loading conditions for the prediction of radius fracture risk based on ex vivo experiments (n = 27).

Best Performance Parameters of HR-pQCT to Predict Fragility Fracture: Systematic Review and Meta-Analysis

Osteoporosis is a systemic skeletal disease characterized by low bone mass and bone structural deterioration that may result in fragility fractures. Use of bone imaging modalities to accurately predict fragility fractures is always an important issue, yet the current gold standard of dual-energy X-ray absorptiometry (DXA) for diagnosis of osteoporosis cannot fully satisfy this purpose. The latest high-resolution peripheral quantitative computed tomography (HR-pQCT) is a three-dimensional (3D) imaging device to measure not only volumetric bone density, but also the bone microarchitecture in a noninvasive manner that may provide a better fracture prediction power. This systematic review and meta-analysis was designed to investigate which HR-pQCT parameters at the distal radius and/or distal tibia could best predict fragility fractures. A systematic literature search was conducted in Embase, PubMed, and Web of Science with relevant keywords by two independent reviewers. Original clinical studies using HR-pQCT to predict fragility fractures with available full text in English were included. Information was extracted from the included studies for further review. In total, 25 articles were included for the systematic review, and 16 articles for meta-analysis. HR-pQCT was shown to significantly predict incident fractures and/or major osteoporotic fractures (MOFs). Of all the HR-pQCT parameters, our meta-analysis revealed that cortical volumetric bone mineral density (Ct.vBMD), trabecular thickness (Tb.Th), and stiffness were better predictors. Meanwhile, HR-pQCT parameters indicated better performance in predicting MOFs than incident fractures. Between the two standard measurement sites of HR-pQCT, the non-weight-bearing distal radius was a more preferable site than distal tibia for fracture prediction. Furthermore, most of the included studies were white-based, whereas very few studies were from Asia or South America. These regions should build up their densitometric databases and conduct related prediction studies. It is expected that HR-pQCT can be used widely for the diagnosis of osteoporosis and prediction of future fragility fractures. © 2021 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).

Bringing Mechanical Context to Image-Based Measurements of Bone Integrity

PURPOSE OF REVIEW

Image-based measurements of bone integrity are used to estimate failure properties and clinical fracture risk. This paper (1) reviews recent imaging studies that have enhanced our understanding of the mechanical pathways to bone fracture and (2) discusses the influence that inter-individual differences in image-based measurements may have on the clinical assessment of fracture risk RECENT FINDINGS: Increased tissue mineralization is associated with improved bone strength but reduced fracture toughness. Trabecular architecture that is important for fatigue resistance is less important for bone strength. The influence of porosity on bone failure properties is heavily dependent on pore location and size. The interaction of various characteristics, such as bone area and mineral content, can further complicate their influence on bone failure properties. What is beneficial for bone strength is not always beneficial for bone toughness or fatigue resistance. Additionally, given the large amount of imaging data that is clinically available, there is a need to develop effective translational strategies to better interpret non-invasive measurements of bone integrity.

Bone density, microarchitecture and strength in elite figure skaters is discipline dependent

OBJECTIVES

In elite figure skaters, to determine if there was a difference in volumetric bone mineral density and bone strength between 1) figure skaters and population-based normative data, 2) single or pair skaters and ice dancers, and 3) the landing and takeoff legs.

DESIGN

Cross-sectional.

METHODS

Figure skaters had their non-dominant distal radius and bilateral tibia scanned using high-resolution peripheral quantitative computed tomography. Volumetric bone mineral density was determined at the total, cortical and trabecular compartments, and finite element analysis estimated bone strength. Normative data was used to compare the total bone mineral density of figure skaters to a population-based cohort. Independent t-tests compared differences between skating discipline, and paired t-tests compared skeletal parameters for the landing and takeoff leg.

RESULTS

Twenty elite skaters (mean age 22 ± 6.2; female = 11, male = 9) completed scans. Compared with the general population, the mean percentile rank for skaters' total volumetric bone mineral density was below normal at the radius (27th percentile) and normal at the tibia (54th percentile). Single or pair skaters had more robust bone in the landing compared with their takeoff leg. Specifically, the landing leg had higher total bone mineral density (2.8%) and trabecular bone mineral density (6.5%), and superior bone strength (8.5%) than the takeoff leg (p < 0.05).

CONCLUSIONS

Volumetric bone mineral density and strength differences in figure skaters were discipline dependent. Side-to-side differences were observed in single and pair skaters where the landing leg is denser, larger and stronger than the takeoff leg.

The clinical application of high-resolution peripheral computed tomography (HR-pQCT) in adults: state of the art and future directions

High-resolution peripheral computed tomography (HR-pQCT) was developed to image bone microarchitecture in vivo at peripheral skeletal sites. Since the introduction of HR-pQCT in 2005, clinical research to gain insight into pathophysiology of skeletal fragility and to improve prediction of fractures has grown. Meanwhile, the second-generation HR-pQCT device has been introduced, allowing novel applications such as hand joint imaging, assessment of subchondral bone and cartilage thickness in the knee, and distal radius fracture healing. This article provides an overview of the current clinical applications and guidance on interpretation of results, as well as future directions. Specifically, we provide an overview of (1) the differences and reference data for HR-pQCT variables by age, sex, and race/ethnicity; (2) fracture risk prediction using HR-pQCT; (3) the ability to monitor response of anti-osteoporosis therapy with HR-pQCT; (4) the use of HR-pQCT in patients with metabolic bone disorders and diseases leading to secondary osteoporosis; and (5) novel applications of HR-pQCT imaging. Finally, we summarize the status of the application of HR-pQCT in clinical practice and discuss future directions. From the clinical perspective, there are both challenges and opportunities for more widespread use of HR-pQCT. Assessment of bone microarchitecture by HR-pQCT improves fracture prediction in mostly normal or osteopenic elderly subjects beyond DXA of the hip, but the added value is marginal. The prospects of HR-pQCT in clinical practice need further study with respect to medication effects, metabolic bone disorders, rare bone diseases, and other applications such as hand joint imaging and fracture healing. The mostly unexplored potential may be the differentiation of patients with only moderately low BMD but severe microstructural deterioration, which would have important implications for the decision on therapeutical interventions.

The Assessment of Skeletal Muscle and Cortical Bone by Second-generation HR-pQCT at the Tibial Midshaft

BACKGROUND

Peripheral quantitative computed tomography (pQCT) is the current densitometric gold-standard for assessing skeletal muscle at the 66% proximal tibia site. High resolution peripheral quantitative computed tomography (HR-pQCT) is a leading technology for quantifying bone microarchitecture at the distal extremities, and with the second-generation HR-pQCT it is possible to measure proximal limb sites. Therefore, the objectives of this study were to: (1) assess the feasibility of using HR-pQCT to assess skeletal muscle parameters at the 66% proximal tibia site, and (2) test HR-pQCT skeletal muscle measurement reproducibility at this site.

METHODS

Adult participants (9 males; 7 females; ages 31-75) received 1 pQCT scan and 2 HR-pQCT scans at the 66% proximal site of the nondominant tibia. Participants were repositioned between HR-pQCT scans to test reproducibility. HR-pQCT and pQCT scans were analyzed to quantify muscle cross-sectional area (CSA) and muscle density. Coefficients of determination and Bland-Altman plots compared muscle parameters between pQCT and HR-pQCT. For short-term reproducibility, root-mean-square of coefficient of variance and least significant change were calculated.

RESULTS

HR-pQCT and pQCT measured muscle density and muscle CSA were positively correlated (R² = 0.66, R² = 0.95, p < 0.001, respectively). Muscle density was equivalent between HR-pQCT and pQCT; however, there was systematic and directional bias for muscle CSA, such that muscle CSA was 11% lower with HR-pQCT and bias increased with larger muscle CSA. Root-mean-square of coefficient of variance was 0.67% and 0.92% for HR-pQCT measured muscle density and muscle CSA, respectively, while least significant change was 1.4 mg/cm³ and 174.0 mm² for muscle density and muscle CSA, respectively.

CONCLUSION

HR-pQCT is capable of assessing skeletal muscle at the 66% site of the tibia with good precision. Measures of muscle density are comparable between HR-pQCT and pQCT.

Automated segmentation of fractured distal radii by 3D geodesic active contouring of in vivo HR-pQCT images

Radius fractures are among the most common fracture types; however, there is limited consensus on the standard of care. A better understanding of the fracture healing process could help to shape future treatment protocols and thus improve functional outcomes of patients. High-resolution peripheral quantitative computed tomography (HR-pQCT) allows monitoring and evaluation of the radius on the micro-structural level, which is crucial to our understanding of fracture healing. However, current radius fracture studies using HR-pQCT are limited by the lack of automated contouring routines, hence only including small number of patients due to the prohibitively time-consuming task of manually contouring HR-pQCT images. In the present study, a new method to automatically contour images of distal radius fractures based on 3D morphological geodesic active contours (3D-GAC) is presented. Contours of 60 HR-pQCT images of fractured and conservatively treated radii spanning the healing process up to one year post-fracture are compared to the current gold standard, hand-drawn 2D contours, to assess the accuracy of the algorithm. Furthermore, robustness was established by applying the algorithm to HR-pQCT images of intact radii of 73 patients and comparing the resulting morphometric indices to the gold standard patient evaluation including a threshold- and dilation-based contouring approach. Reproducibility was evaluated using repeat scans of intact radii of 19 patients. The new 3D-GAC approach offers contours within inter-operator variability for images of fractured distal radii (mean Dice score of 0.992 ± 0.005 versus median operator Dice score of 0.992 ± 0.006). The generated contours for images of intact radii yielded morphometric indices within the in vivo reproducibility limits compared to the current gold standard. Additionally, the 3D-GAC approach shows an improved robustness against failure (n = 5) when dealing with cortical interruptions, fracture fragments, etc. compared with the automatic, default manufacturer pipeline (n = 40). Using the 3D-GAC approach assures consistent results, while reducing the need for time-consuming hand-contouring.

Multisite longitudinal calibration of HR-pQCT scanners and precision in osteogenesis imperfecta

BACKGROUND

For high-resolution peripheral quantitative computed tomography (HR-pQCT) to be used in longitudinal multi-center studies to assess disease and treatment effects, data must be aggregated across multiple timepoints and scanners. This requires an understanding of the factors contributing to scanner precision, and multi-scanner cross-calibration procedures, especially for clinical populations with severe phenotypes, like osteogenesis imperfecta (OI).

METHODS

To address this, we first evaluated single- and multi-center short- and long-term precision errors of standard HR-pQCT parameters. Two imaging phantoms were circulated among 13 sites (7 XtremeCT and 6 XtremeCT2) and scanned in triplicate at 3 timepoints/site. Additionally, duplicate in vivo radial and tibial scans were acquired in 29 individuals with OI. Secondly, we investigated subject- and scanner-related factors that contribute to precision errors using regression analysis. Thirdly, we proposed a reference site selection criterion for multisite cross-calibration and demonstrated the external validity of phantom-based calibrations.

RESULTS

Our results show excellent short-term single-site precision in both phantoms (CV % < 0.5%) and in density, microarchitecture and finite element parameters of OI participants (CV % = 0.75 to 1.2%). In vivo reproducibility significantly improved with (i) cross sectional area image registration versus no registration and (ii) scans with no motion artifacts. While reproducibility was similar across OI subtypes and anatomical sites, XtremeCT2 scanners achieved ~2.5% better precision than XtremeCT for trabecular parameters. Finally, we demonstrate that multisite longitudinal precision errors resulting from inconsistencies between scanners can be partially corrected through scanner cross-calibration.

CONCLUSIONS

This study is the first to assess long-term reproducibility and cross-calibration in a study using first and second generation HR-pQCT scanners. The results presented in this context provide timely guidelines for future use of this powerful clinical imaging modality in multi-center longitudinal clinical trials.

Musculoskeletal injuries in military personnel-Descriptive epidemiology, risk factor identification, and prevention

OBJECTIVES

To provide an overall perspective on musculoskeletal injury (MSI) epidemiology, risk factors, and preventive strategies in military personnel.

DESIGN

Narrative review.

METHODS

The thematic session on MSIs in military personnel at the 5th International Congress on Soldiers' Physical Performance (ICSPP) included eight presentations on the descriptive epidemiology, risk factor identification, and prevention of MSIs in military personnel. Additional topics presented were bone anabolism, machine learning analysis, and the effects of non-steroidal anti-inflammatory drugs (NSAIDs) on MSIs. This narrative review focuses on the thematic session topics and includes identification of gaps in existing literature, as well as areas for future study.

RESULTS

MSIs cause significant morbidity among military personnel. Physical training and occupational tasks are leading causes of MSI limited duty days (LDDs) for the U.S. Army. Recent studies have shown that MSIs are associated with the use of NSAIDs. Bone MSIs are very common in training; new imaging technology such as high resolution peripheral quantitative computed tomography allows visualization of bone microarchitecture and has been used to assess new bone formation during military training. Physical activity monitoring and machine learning have important applications in monitoring and informing evidence-based solutions to prevent MSIs.

CONCLUSIONS

Despite many years of research, MSIs continue to have a high incidence among military personnel. Areas for future research include quantifying exposure when determining MSI risk; understanding associations between health-related components of physical fitness and MSI occurrence; and application of innovative imaging, physical activity monitoring and data analysis techniques for MSI prevention and return to duty.

Pre-flight exercise and bone metabolism predict unloading-induced bone loss due to spaceflight

Objectives

Bone loss remains a primary health concern for astronauts, despite in-flight exercise. We examined changes in bone microarchitecture, density and strength before and after long-duration spaceflight in relation to biochemical markers of bone turnover and exercise.

Methods

Seventeen astronauts had their distal tibiae and radii imaged before and after space missions to the International Space Station using high-resolution peripheral quantitative CT. We estimated bone strength using finite element analysis and acquired blood and urine biochemical markers of bone turnover before, during and after spaceflight. Pre-flight exercise history and in-flight exercise logs were obtained. Mixed effects models examined changes in bone and biochemical variables and their relationship with mission duration and exercise.

Results

At the distal tibia, median cumulative losses after spaceflight were −2.9% to −4.3% for bone strength and total volumetric bone mineral density (vBMD) and −0.8% to −2.6% for trabecular vBMD, bone volume fraction, thickness and cortical vBMD. Mission duration (range 3.5–7 months) significantly predicted bone loss and crewmembers with higher concentrations of biomarkers of bone turnover before spaceflight experienced greater losses in tibia bone strength and density. Lower body resistance training volume (repetitions per week) increased 3–6 times in-flight compared with pre-spaceflight. Increases in training volume predicted preservation of tibia bone strength and trabecular vBMD and thickness.

Conclusions

Findings highlight the fundamental relationship between mission duration and bone loss. Pre-flight markers of bone turnover and exercise history may identify crewmembers at greatest risk of bone loss due to unloading and may focus preventative measures.

A new approach for quantifying localized bone loss by measuring void spaces

The application of high resolution peripheral quantitative computed tomography (HR-pQCT) for the study of bone health has provided valuable insight into the role bone microarchitecture has in determining bone strength and fracture risk. However, conventional density and morphological parameters struggle to distinguish whether localized bone loss is present, visible as heterogeneous deterioration in the trabecular network. This is because current HR-pQCT parameters quantify a global average of properties in the cortical or trabecular compartment. This study proposes a new metric we term "void space" that segments volumes of localized deterioration in the trabecular bone network from HR-pQCT scans and quantifies void space as the void space to total volume ratio (VS/TV, %). A simple and fully automated protocol for segmenting and quantifying void space in HR-pQCT scans is presented, along with the assessment of accuracy, precision, and cross-calibration between generations of HR-pQCT systems. Finally, prevalence of void space and the association with standard HR-pQCT parameters is demonstrated using a large population-based cohort (n = 1236). Void space detection was found to be highly reproducible (accuracy >95%, least significant change <1.76% VS/TV) and correlation between scanner generations was strong (R² = 0.87), although the first generation system struggled to identify small voids. Assessment of void space prevalence in the population-based cohort revealed that void spaces were more common in females than males, prevalence increased with age, and void spaces were typically systemic (occurring at both scan sites rather than only one). A comparison of group-wise differences between participants with and without void space demonstrated that individuals with void spaces had significantly worse trabecular properties for both sexes and at both scan sites. Specifically, the median trabecular bone mineral density, bone volume fraction, and trabecular number were below the 25th percentile of the population, while trabecular separation and inhomogeneity were above the 75th percentile of the population in participants with void spaces. Cortical bone characteristics did not differ between participants with and without void spaces. When the void space region was excluded from morphological analysis so that only the remaining "functional bone" was considered, trabecular properties of participants with void spaces were greatly improved, especially for those who were the greatest outliers. Void space is an intuitive morphological parameter that captures localized deterioration in the trabecular bone network, and has the potential to provide valuable insight into the assessment of bone fragility.

Stressed volume estimated by finite element analysis predicts the fatigue life of human cortical bone: The role of vascular canals as stress concentrators

The fatigue life of cortical bone can vary several orders of magnitude, even in identical loading conditions. A portion of this variability is likely related to intracortical microarchitecture and the role of vascular canals as stress concentrators. The size, spatial distribution, and density of canals determine the peak magnitude and volume of stress concentrations. This study utilized a combination of experimental fatigue testing and image-based finite element (FE) analysis to establish the relationship between the stressed volume (i.e., volume of bone above yield stress) associated with vascular canals and the fatigue life of cortical bone. Thirty-six cortical bone samples were prepared from human femora and tibiae from five donors. Samples were allocated to four loading groups, corresponding to stress ranges of 60, 70, 80, and 90 MPa, then cyclically loaded in zero-compression until fracture. Porosity, canal diameter, canal separation, and canal number for each sample was quantified using X-ray microscopy (XRM) after testing. FE models were created from XRM images and used to calculate the stressed volume. Stressed volume was a good predictor of fatigue life, accounting for 67% of the scatter in fatigue-life measurements. An increase in stressed volume was most strongly associated with higher levels of intracortical porosity and larger canal diameters. The findings from this study suggest that a large portion of the fatigue-life variance of cortical bone in zero-compression is driven by intracortical microarchitecture, and that fatigue failure may be predicted by quantifying the stress concentrations associated with vascular canals.

MRI-derived porosity index is associated with whole-bone stiffness and mineral density in human cadaveric femora

Ultrashort echo time (UTE) magnetic resonance imaging (MRI) measures proton signals in cortical bone from two distinct water pools, bound water, or water that is tightly bound to bone matrix, and pore water, or water that is freely moving in the pore spaces in bone. By isolating the signal contribution from the pore water pool, UTE biomarkers can directly quantify cortical bone porosity in vivo. The Porosity Index (PI) is one non-invasive, clinically viable UTE-derived technique that has shown strong associations in the tibia with μCT porosity and other UTE measures of bone water. However, the efficacy of the PI biomarker has never been examined in the proximal femur, which is the site of the most catastrophic osteoporotic fractures. Additionally, the loads experienced during a sideways fall are complex and the femoral neck is difficult to image with UTE, so the usefulness of the PI in the femur was unknown. Therefore, the aim of this study was to examine the relationships between the PI measure in the proximal cortical shaft of human cadaveric femora specimens compared to (1) QCT-derived bone mineral density (BMD) and (2) whole bone stiffness obtained from mechanical testing mimicking a sideways fall. Fifteen fresh, frozen whole cadaveric femora specimens (age 72.1 ± 15.0 years old, 10 male, 5 female) were scanned on a clinical 3-T MRI using a dual-echo UTE sequence. Specimens were then scanned on a clinical CT scanner to measure volumetric BMD (vBMD) and then non-destructively mechanically tested in a sideways fall configuration. The PI in the cortical shaft demonstrated strong correlations with bone stiffness (r = -0.82, P = 0.0014), CT-derived vBMD (r = -0.64, P = 0.0149), and with average cortical thickness (r = -0.60, P = 0.0180). Furthermore, a hierarchical regression showed that PI was a strong predictor of bone stiffness which was independent of the other parameters. The findings from this study validate the MRI-derived porosity index as a useful measure of whole-bone mechanical integrity and stiffness.

Autologous micrografts from the palatal mucosa for bone regeneration in calvarial defects in rats: a radiological and histological analysis

BACKGROUND

The application of dental implants is often restricted by bone volume. In such cases, bone grafts are required, although bone graft materials have some disadvantages. Therefore, other effective approaches are needed. Our previous study showed that the autologous micrograft, a dissociated cell suspension made out of palatal connective tissue grafts, promoted bone-marrow cell proliferation and differentiation under osteogenic conditions. In this study, we aimed to evaluate the effects of dissociated soft-tissue suspensions relevant to bone regeneration in animal model.

MATERIAL AND METHODS

Twelve-week-old male Wistar rats were used in the study. Defects were created in rat calvaria, and were filled with hydrogel containing either dissociated soft-tissue suspension (test) or sucrose (control). The new bone formation was evaluated at 1 and 2 weeks after surgery (n = 16) by radiological and histological analysis.

RESULTS

The conducted radiological analysis showed that the new bone volume was significantly greater in the dissociated soft-tissue suspension group. This finding was further confirmed by the conducted histological analysis.

CONCLUSIONS

The dissociated mucosa tissue suspension enhanced bone regeneration in vivo; thus, it is a promising potential method to aid the successful application for bone augmentation in the implant practice.

Validation of HR-pQCT against micro-CT for morphometric and biomechanical analyses: A review

High-resolution peripheral quantitative computed-tomography (HR-pQCT) has the potential to become a powerful clinical assessment and diagnostic tool. Given the recent improvements in image resolution, from 82 to 61 μm, this technology may be used to accurately quantify in vivo bone microarchitecture, a key biomarker of degenerative bone diseases. However, computational methods to assess bone microarchitecture were developed for micro computed tomography (micro-CT), a higher-resolution technology only available for ex vivo studies, and validation of these computational analysis techniques against the gold-standard micro-CT has been inconsistent and incomplete. Herein, we review methods for segmentation of bone compartments and microstructure, quantification of bone morphology, and estimation of mechanical strength using finite-element analysis, highlighting the need throughout for improved standardization across the field. Studies have relied on homogenous datasets for validation, which does not allow for robust comparisons between methods. Consequently, the adaptation and validation of novel segmentation approaches has been slow to non-existent, with most studies still using the manufacturer's segmentation for morphometric analysis despite the existence of better performing alternative approaches. The promising accuracy of HR-pQCT for capturing morphometric indices is overshadowed by considerable variability in outcomes between studies. For finite element analysis (FEA) methods, the use of disparate material models and FEA tools has led to a fragmented ability to assess mechanical bone strength with HR-pQCT. Further, the scarcity of studies comparing 62 μm HR-pQCT to the gold standard micro-CT leaves the validation of this imaging modality incomplete. This review revealed that without standardization, the capabilities of HR-pQCT cannot be adequately assessed. The need for a public, extendable, heterogeneous dataset of HR-pQCT and corresponding gold-standard micro-CT images, which would allow HR-pQCT users to benchmark existing and novel methods and select optimal methods depending on the scientific question and data at hand, is now evident. With more recent advancements in HR-pQCT, the community must learn from its past and provide properly validated technologies to ensure that HR-pQCT can truly provide value in patient diagnosis and care.

In vivo repeatability of homogenized finite element analysis based on multiple HR-pQCT sections for assessment of distal radius and tibia strength

INTRODUCTION

Micro finite element analysis (μFE) is a widely applied tool in biomedical research for assessing in vivo mechanical properties of bone at measurement sites, including the ultra-distal radius and tibia. A finite element approach (hFE) based on homogenized constitutive models for trabecular bone offers an attractive alternative for clinical use, as it is computationally less expensive than traditional μFE. The respective patient-specific models for in vivo bone strength estimation are usually based on standard clinical high-resolution peripheral quantitative CT (HR-pQCT) measurements. They include a scan region of roughly 10 mm in height and are referred to as single-sections. It has been shown, that these small peripheral bone sections don't reliably cover the fracture line in Colles' fractures and therefore the weakest region at the radius. Recently introduced multiple section (multiple adjacent single-sections) measurements might improve the evaluation of bone strength, but little is known about the repeatability of hFE estimations in general, and especially for multiple section measurement protocols. Accordingly, the aim of the present work is to quantify repeatability of clinical in vivo bone strength measurement by hFE on multiple section HR-pQCT reconstructions at the distal radius and tibia.

METHODS

Nineteen healthy Swiss women (43.6y ± 17.8y) and twenty men (48.2y ± 19.4y) were examined with HR-pQCT at 61 μm isotropic voxel resolution. Each subject was first scanned three times using a double-section (336 slices) at the distal radius and then three times using a triple-section (504 slices) at the distal tibia. The multiple section HR-pQCT reconstructions were graded for motion artefacts and non-linear hFE models (radius and tibia) and linear μFE models (only radius) were generated for estimation of stiffness and ultimate load. Then in vivo repeatability errors were computed in terms of root mean square coefficients of variation (CV).

RESULTS

In vivo repeatability errors of non-linear hFE stiffness (S) and ultimate load (F) were significantly higher at the radius (S: 2.71% and F: 2.97%) compared to the tibia (S: 1.21%, F: 1.45%). Multiple section linear μFE at the radius resulted in substantially higher repeatability errors (S: 5.38% and F: 10.80%) compared to hFE.

DISCUSSION/CONCLUSION

Repeatability errors of hFE outcomes based on multiple section measurements at the distal radius and tibia were generally lower compared to respective reported single-section μFE repeatability errors. Therefore, hFE is an attractive alternative to today's gold standard of μFE models and should especially be encouraged when analyzing multiple section measurements.

Adverse Effects of High-Dose Vitamin D Supplementation on Volumetric Bone Density Are Greater in Females than Males

Three years of high-dose vitamin D supplementation (400 IU, 4000 IU, 10,000 IU) in healthy vitamin D-sufficient individuals aged 55 to 70 years (serum 25(OH)D 30-125 nmol/L at baseline), resulted in a negative dose-response relationship for bone density and strength. This study examined whether response differed between males and females. A total of 311 participants (53% male) were randomized to 400 IU (male = 61, female = 48), 4000 IU (male = 51, female = 49), or 10,000 IU (male = 53, female = 49) daily vitamin D₃ . Participants were scanned with high-resolution peripheral quantitative computed tomography (HR-pQCT) to measure total volumetric BMD (TtBMD) at baseline, 6, 12, 24, and 36 months. Finite element analysis estimated bone strength. Balance, physical function, and clinical biochemistry parameters were also assessed. Constrained linear mixed effects models determined time-by-treatment group-by-sex interactions. Baseline, 3-month, and 3-year levels of 25(OH)D were 76.3, 76.7, and 77.4 nmol/L (400 IU); 81.3, 115.3, and 132.2 (4000 IU); and 78.4, 188.0, and 144.4 (10,000 IU), respectively. There were significant time-by-treatment group-by-sex interactions for TtBMD at the radius (p = .002) and tibia (p = .005). Treatment with 4000 IU or 10,000 IU compared to 400 IU resulted in TtBMD losses in females, but this was not observed with males. After 3 years, females lost 1.8% (400 IU), 3.8% (4000 IU), and 5.5% (10,000 IU), whereas males lost 0.9% (400 IU), 1.3% (4000 IU), and 1.9% (10,000 IU) at the radius. At the tibia, losses in TtBMD were smaller, but followed a similar trend. There were no significant bone strength interactions. Vitamin D supplementation with 4000 IU or 10,000 IU, compared with 400 IU daily, resulted in greater losses of TtBMD over 3 years in healthy vitamin D-sufficient females, but not males. These results are clinically relevant, because vitamin D supplementation is widely administered to postmenopausal females for osteoporosis prevention. Our findings do not support a benefit of high-dose vitamin D supplementation for bone health, and raise the possibility of harm for females. © 2020 American Society for Bone and Mineral Research (ASBMR).

Age-, Site-, and Sex-Specific Normative Centile Curves for HR-pQCT-Derived Microarchitectural and Bone Strength Parameters in a Chinese Mainland Population

High-resolution peripheral quantitative computed tomography (HR-pQCT) is an advanced 3D imaging technology that has the potential to contribute to fracture risk assessment and early diagnosis of osteoporosis. However, to date no studies have sought to establish normative reference ranges for HR-pQCT measures among individuals from the Chinese mainland, significantly restricting its use. In this study, we collected HR-pQCT scans from 863 healthy Chinese men and women aged 20 to 80 years using the latest-generation scanner (Scanco XtremeCT II, Scanco Medical AG, Brüttisellen, Switzerland). Parameters including volumetric bone mineral density, bone geometry, bone microarchitecture, and bone strength were evaluated. Age-, site-, and sex-specific centile curves were established using generalized additive models for location, scale, and shape with age as the only explanatory variable. Based on established models, age-related variations for different parameters were also quantified. For clinical purposes, the expected values of HR-pQCT parameters for a defined age and a defined percentile or Z-score were provided. We found that the majority of trabecular and bone strength parameters reached their peak at 20 years of age, regardless of sex and site, then declined steadily thereafter. However, most of the cortical bone loss was observed after the age of 50 years. Among the measures, cortical porosity changed most dramatically, and overall, changes were more notable at the radius than the tibia and among women compared with men. Establishing such normative HR-pQCT reference data will provide an important basis for clinical and research applications in mainland China aimed at elucidating microstructural bone damage driven by different disease states or nutritional status. © 2020 American Society for Bone and Mineral Research.

Sex- and Site-Specific Reference Data for Bone Microarchitecture in Adults Measured Using Second-Generation HR-pQCT

There are currently no population-based reference data sets available for volumetric bone mineral density and microarchitecture parameters measured using the second-generation high-resolution peripheral quantitative computed tomography (HR-pQCT), yet the technology is rapidly becoming a standard for studies of bone microarchitecture. Although cross-calibrated data sets from the first-generation HR-pQCT have been reported, they are not suitable for second-generation bone microarchitecture properties because of fundamental differences between scanner generations. This study provides site- and sex-specific centile curves across the adult life span for second-generation HR-pQCT properties. A total of 1236 adult participants (768 female and 468 male) from the Calgary area between the ages of 18 and 90 years were scanned at the distal tibia and radius using the second-generation HR-pQCT. Bone densities, microarchitectural properties, and failure load estimated using finite element analysis were determined using standard in vivo protocol. Site- and sex-specific centile curves were generated using the generalized additive models for location, scale, and shape (GAMLSS) method. These data provide reference curves appropriate for predominantly white male and female adults, which can be used as a tool to assess patient- or cohort-specific bone health. © 2020 American Society for Bone and Mineral Research.

Longitudinal bone microarchitectural changes are best detected using image registration

Longitudinal studies of bone using high-resolution medical imaging may result in non-physiological measurements of longitudinal changes. In this study, we determined that three-dimensional image processing techniques best capture realistic longitudinal changes in bone density and should therefore be used with high-resolution imaging when studying bone changes over time.

INTRODUCTION

The purpose of this study was to determine which longitudinal analysis technique (no registration (NR), slice-match (SM) registration, or three-dimensional registration (3DR)) produced the most realistic longitudinal changes in a 3-year study of bone density and structure using high-resolution peripheral quantitative computed tomography (HR-pQCT).

METHODS

We assessed HR-pQCT scans of the distal radius and tibia for men and women (N = 40) aged 55-70 years at baseline and 6, 12, 24, and 36 months. To evaluate which longitudinal analysis technique (NR, SM, or 3DR) best captured physiologically reasonable 3-year changes, we calculated the standard deviation of the absolute rate of change in each bone parameter. The data were compared between longitudinal analysis techniques using repeated measures ANOVA and post hoc analysis.

RESULTS

As expected, both SM and 3DR better captured physiological longitudinal changes than NR. At the tibia, there were no differences between SM and 3DR; however, at the radius where precision was lower, 3DR produced better results for total bone mineral density.

CONCLUSIONS

At least SM or 3DR should be implemented in longitudinal studies using HR-pQCT. 3DR is preferable, particularly at the radius, to ensure that physiological changes in bone density are observed.

Guidelines for the assessment of bone density and microarchitecture in vivo using high-resolution peripheral quantitative computed tomography

INTRODUCTION

The application of high-resolution peripheral quantitative computed tomography (HR-pQCT) to assess bone microarchitecture has grown rapidly since its introduction in 2005. As the use of HR-pQCT for clinical research continues to grow, there is an urgent need to form a consensus on imaging and analysis methodologies so that studies can be appropriately compared. In addition, with the recent introduction of the second-generation HrpQCT, which differs from the first-generation HR-pQCT in scan region, resolution, and morphological measurement techniques, there is a need for guidelines on appropriate reporting of results and considerations as the field adopts newer systems.

METHODS

A joint working group between the International Osteoporosis Foundation, American Society of Bone and Mineral Research, and European Calcified Tissue Society convened in person and by teleconference over several years to produce the guidelines and recommendations presented in this document.

RESULTS

An overview and discussion is provided for (1) standardized protocol for imaging distal radius and tibia sites using HR-pQCT, with the importance of quality control and operator training discussed; (2) standardized terminology and recommendations on reporting results; (3) factors influencing accuracy and precision error, with considerations for longitudinal and multi-center study designs; and finally (4) comparison between scanner generations and other high-resolution CT systems.

CONCLUSION

This article addresses the need for standardization of HR-pQCT imaging techniques and terminology, provides guidance on interpretation and reporting of results, and discusses unresolved issues in the field.

Optimizing HR-pQCT workflow: a comparison of bias and precision error for quantitative bone analysis

Manual correction of automatically generated contours for high-resolution peripheral quantitative computed tomography can be time consuming and introduces precision error. However, bias related to the automated protocol is unknown. This study provides insight into error bias that is present when using uncorrected contours and inter-operator precision error based on operator training.

INTRODUCTION

High-resolution peripheral quantitative computed tomography workflow includes manually correcting contours generated by the manufacturer's automated protocol. There is interest in minimizing corrections to save time and reduce precision error; however, bias related to the automated protocol is unknown. This study quantifies error bias when contours are uncorrected and identifies the impact of operator training on bias and precision error.

METHODS

Forty-five radii and tibiae scans across a representative range of bone density were analyzed using the automated and manually corrected contours of three operators, with training ranging from beginner to expert, and compared with a "ground truth" to estimate bias. Inter-operator precision was measured across operators.

RESULTS

The tibia had greater error bias than the radius when contours were uncorrected, with compartmental bone mineral densities and cortical microarchitecture having greatest biases, which could have significant implications for interpretation of studies using this skeletal site. Bias and precision error were greatest when contours were corrected by the beginner operator; however, when this operator was removed, bias was no longer present and inter-operator precision was between 0.01 and 3.74% for all parameters except cortical porosity.

CONCLUSION

These findings establish the need for manual correction and provide guidance on operator training needed to maximize workflow efficiency.

HR-pQCT imaging in children, adolescents and young adults: Systematic review and subgroup meta-analysis of normative data

We aimed to investigate the methodologies on image acquisition of normative data of high-resolution peripheral quantitative computed tomography (HR-pQCT) in children, adolescents and/or young adults (up to 25 years) and to determine their normative data based on available literature. A literature search was conducted in MEDLINE, EMBASE and Web of Science from 1947 to July 2019. Quality of articles was assessed using Standards for Reporting of Diagnostic Accuracy (STARD) scoring system and Modified Newcastle-Ottawa scale (NOS). Articles which fitted the following criteria were combined to meta-analysis: age range (15 to 22.6 years), references at tibia (22.5mm) and/or radius (9.0 to 9.5mm). Eight articles were ultimately included in the systematic review and 4 of them that filled the criteria were summarised in meta-analysis. The results of random effects model of HR-pQCT parameters of the 4 articles were as follows: 1)Radius: bone volume fraction (BT/BV) [estimate 0.17:0.1229(lower)-0.2115 (upper); trabecular number (Tb_N):2.08(2.03–2.12); trabecular thickness (Tb.Th):0.07 (0.07–0.0.08); trabecular separation (Tb.Sp):0.41 (0.38–0.42); cortical thickness (Ct.Th):0.85 (0.76–0.94); cortical porosity (Ct.Po):1.53 (0.63–2.44); total area (Tt.Ar):263.66(-385.3–912.6); total bone density (Tt-vBMD):280.5 (73.1–487.7); Trabecular density (Tb-vBMD):223.6 (47.1–400.09), and cortical density (CT.vBMD):765.9 (389.1–1142.8). 2)Tibia: BT/BV:0.18 (0.17–0.19); Tb_N:2.02 (1.83–2.2); Tb.Th:0.08 (0.80–0.09); Tb.Sp:0.40(0.36–0.44); Ct.Th:1.32(1.26–1.38); Ct.Po:3.15 (1.1–5.2); Tt.Ar:693.1(150.2–1235.8); Tt-vBMD:343.76 (335.5–352.1); Tb-vBMD:223.6 (213.37 (193.5–233.2), and CT.vBMD:894.3 (857.6–931.1). There is overall ‘fair’ evidence on reporting of results of normative data of HR-pQCT parameters in children, adolescents and/or young adults. However, data are scarce pointing out to the urgent need for standardization of acquisition parameters and guidelines on the use of HR-PQCT in these populations.

Effect of High-Dose Vitamin D Supplementation on Volumetric Bone Density and Bone Strength: A Randomized Clinical Trial

Importance

Few studies have assessed the effects of daily vitamin D doses at or above the tolerable upper intake level for 12 months or greater, yet 3% of US adults report vitamin D intakes of at least 4000 IU per day.

Objective

To assess the dose-dependent effect of vitamin D supplementation on volumetric bone mineral density (BMD) and strength.

Design, Setting, and Participants

Three-year, double-blind, randomized clinical trial conducted in a single center in Calgary, Canada, from August 2013 to December 2017, including 311 community-dwelling healthy adults without osteoporosis, aged 55 to 70 years, with baseline levels of 25-hydroxyvitamin D (25[OH]D) of 30 to 125 nmol/L.

Interventions

Daily doses of vitamin D3 for 3 years at 400 IU (n = 109), 4000 IU (n = 100), or 10 000 IU (n = 102). Calcium supplementation was provided to participants with dietary intake of less than 1200 mg per day.

Main Outcomes and Measures

Co-primary outcomes were total volumetric BMD at radius and tibia, assessed with high resolution peripheral quantitative computed tomography, and bone strength (failure load) at radius and tibia estimated by finite element analysis.

Results

Of 311 participants who were randomized (53% men; mean [SD] age, 62.2 [4.2] years), 287 (92%) completed the study. Baseline, 3-month, and 3-year levels of 25(OH)D were 76.3, 76.7, and 77.4 nmol/L for the 400-IU group; 81.3, 115.3, and 132.2 for the 4000-IU group; and 78.4, 188.0, and 144.4 for the 10 000-IU group. There were significant group × time interactions for volumetric BMD. At trial end, radial volumetric BMD was lower for the 4000 IU group (-3.9 mg HA/cm3 [95% CI, -6.5 to -1.3]) and 10 000 IU group (-7.5 mg HA/cm3 [95% CI, -10.1 to -5.0]) compared with the 400 IU group with mean percent change in volumetric BMD of -1.2% (400 IU group), -2.4% (4000 IU group), and -3.5% (10 000 IU group). Tibial volumetric BMD differences from the 400 IU group were -1.8 mg HA/cm3 (95% CI, -3.7 to 0.1) in the 4000 IU group and -4.1 mg HA/cm3 in the 10 000 IU group (95% CI, -6.0 to -2.2), with mean percent change values of -0.4% (400 IU), -1.0% (4000 IU), and -1.7% (10 000 IU). There were no significant differences for changes in failure load (radius, P = .06; tibia, P = .12).

Conclusions and Relevance

Among healthy adults, treatment with vitamin D for 3 years at a dose of 4000 IU per day or 10 000 IU per day, compared with 400 IU per day, resulted in statistically significant lower radial BMD; tibial BMD was significantly lower only with the 10 000 IU per day dose. There were no significant differences in bone strength at either the radius or tibia. These findings do not support a benefit of high-dose vitamin D supplementation for bone health; further research would be needed to determine whether it is harmful.

Trial Registration

ClinicalTrials.gov Identifier: NCT01900860.

Next-generation imaging of the skeletal system and its blood supply

Bone is organized in a hierarchical 3D architecture. Traditionally, analysis of the skeletal system was based on bone mass assessment by radiographic methods or on the examination of bone structure by 2D histological sections. Advanced imaging technologies and big data analysis now enable the unprecedented examination of bone and provide new insights into its 3D macrostructure and microstructure. These technologies comprise ex vivo and in vivo methods including high-resolution computed tomography (CT), synchrotron-based imaging, X-ray microscopy, ultra-high-field magnetic resonance imaging (MRI), light-sheet fluorescence microscopy, confocal and intravital two-photon imaging. In concert, these techniques have been used to detect and quantify a novel vascular system of trans-cortical vessels in bone. Furthermore, structures such as the lacunar network, which harbours and connects osteocytes, become accessible for 3D imaging and quantification using these methods. Next-generation imaging of the skeletal system and its blood supply are anticipated to contribute to an entirely new understanding of bone tissue composition and function, from macroscale to nanoscale, in health and disease. These insights could provide the basis for early detection and precision-type intervention of bone disorders in the future.

The Correction of Systematic Error due to Plaster and Fiberglass Casts on HR-pQCT Bone Parameters Measured In Vivo at the Distal Radius

Due to difficulty assessing healing of distal radius fractures using conventional radiography, there is interest in using high resolution peripheral quantitative computed tomography (HR-pQCT) to track healing at the microarchitectural level. Unfortunately, the plaster-of-Paris and fiberglass casts used to immobilize fractures affect HR-pQCT measurements due to beam hardening, and increased noise. The challenge is compounded because casts have variable thickness, and an individual patient will often have their cast changed 2-3 times during the course of treatment. This study quantifies the effect of casts within a clinically relevant range of thicknesses on measured bone parameters at the distal radius, and establishes conversion equations to correct for systematic error in due to cast presence. Eighteen nonfractured participants were scanned by HR-pQCT in three conditions: no cast, plaster-of-Paris cast, and fiberglass cast. Measured parameters were compared between the baseline scan (no cast) and each cast scan to evaluate if systematic error exists due to cast presence. A linear regression model was used to determine an appropriate conversion for parameters that were found to have systematic error. Plaster-of-Paris casts had a greater range of thicknesses (3.2-9.5 mm) than the fiberglass casts (3.0-5.4 mm), and induced a greater magnitude of systematic error overall. Key parameters of interest were bone mineral density (total, cortical, and trabecular) and trabecular bone volume fraction, all of which were found to have systematic error due to presence of either cast type. Linear correlations between baseline and cast scans for these parameters were excellent (R² > 0.98), and appropriate conversions could be determined within a margin of error less than a ±6% for the plaster-of-Paris cast, and ±4% for the fiberglass cast. We have demonstrated the effects of cast presence on bone microarchitecture measurements, and presented a method to correct for systematic error, in support of future use of HR-pQCT to study fracture healing.

Validation of distal radius failure load predictions by homogenized- and micro-finite element analyses based on second-generation high-resolution peripheral quantitative CT images

This study developed a well-standardized and reproducible approach for micro-finite element (mFE) and homogenized-FE (hFE) analyses that can accurately predict the distal radius failure load using either mFE or hFE models when using the approaches and parameters developed in this study.

INTRODUCTION

Micro-FE analyses based on high-resolution peripheral quantitative CT (HR-pQCT) images are frequently used to predict distal radius failure load. With the introduction of a second-generation HR-pQCT device, however, the default modelling approach no longer provides accurate results. The aim of this study was to develop a well-standardized and reproducible approach for mFE and hFE analyses that can provide precise and accurate results for distal radius failure load predictions based on second-generation HR-pQCT images.

METHODS

Second-generation HR-pQCT was used to scan the distal 20-mm section of 22 cadaver radii. The sections were excised and mechanically tested afterwards. For these sections, mFE and hFE models were made that were used to identify required material parameters by comparing predicted and measured results. Using these parameters, the models were cropped to represent the 10-mm region recommended for clinical studies to test their performance for failure load prediction.

RESULTS

After identification of material parameters, the measured failure load of the 20-mm segments was in good agreement with the results of mFE models (R² = 0.969, slope = 1.035) and hFE models (R² = 0.966, slope = 0.890). When the models were restricted to the clinical region, mFE still accurately predicted the measured failure load (R² = 0.955, slope = 1.021), while hFE predictions were precise but tended to overpredict the failure load (R² = 0.952, slope = 0.780).

CONCLUSIONS

It was concluded that it is possible to accurately predict the distal radius failure load using either mFE or hFE models when using the approaches and parameters developed in this study.

Lower Bone Density, Impaired Microarchitecture, and Strength Predict Future Fragility Fracture in Postmenopausal Women: 5-Year Follow-up of the Calgary CaMos Cohort

The aim of this prospective study was to use high-resolution peripheral quantitative computed tomography (HR-pQCT) to determine if baseline skeletal parameters can predict incident fragility fracture in women and, secondly, to establish if women that fracture lose bone at a faster rate than those who do not fracture. Women older than 60 years who experienced a fragility fracture during the 5-year follow-up period (incident fracture group, n = 22) were compared with those who did not experience a fragility fracture during the study (n = 127). After image registration between baseline and follow-up measures, standard and cortical morphological analyses were conducted. Odds ratios were calculated for baseline values and annualized percent change of HR-pQCT and finite element variables. At the radius, baseline HR-pQCT results show women who fractured had lower total bone mineral density (Tt.BMD; 19%), trabecular bone mineral density (Tb.BMD; 25%), and trabecular number (Tb.N; 14%), with higher trabecular separation (Tb.Sp; 19%) than women who did not fracture. At the tibia, women with incident fracture had lower Tt.BMD (15%), Tb.BMD (12%), cortical thickness (Ct.Th; 14%), cortical area (Ct.Ar; 12%), and failure load (10%) with higher total area (Tt.Ar; 7%) and trabecular area (Tb.Ar; 10%) than women who did not fracture. Odds ratios (ORs) at the radius revealed every SD decrease of Tt.BMD (OR = 2.1), Tb.BMD (OR = 2.0), and Tb.N (OR = 1.7) was associated with a significantly increased likelihood of fragility fracture. At the tibia, every SD decrease in Tt.BMD (OR = 2.1), Tb.BMD (OR = 1.7), Ct.Th (OR = 2.2), Ct.Ar (OR = 1.9), and failure load (OR = 1.7) were associated with a significantly increased likelihood of fragility fracture. Irrespective of scanning modality, the annualized percent rate of bone loss was not different between fracture groups. The results suggest baseline bone density, microarchitecture, and strength rather than change in these variables are associated with incident fragility fractures in women older than 60 years. Furthermore, irrespective of fragility fracture status, women experienced changes in skeletal health at a similar rate. © 2017 American Society for Bone and Mineral Research.

Methods and procedures for: A randomized double-blind study investigating dose-dependent longitudinal effects of vitamin D supplementation on bone health

The optimum dose of vitamin D and corresponding serum 25-hydroxyvitamin D (25OHD) concentration for bone health is still debated and some health practitioners are recommending doses well above the Canada/USA recommended Dietary Reference Intake (DRI). We designed a three-year randomized double-blind clinical trial investigating whether there are dose-dependent effects of vitamin D supplementation above the Dietary Reference Intake (DRI) on bone health. The primary aims of this study are to assess, whether supplementation of vitamin D₃ increases 1) volumetric bone mineral density measured by high-resolution peripheral quantitative computed tomography (HR-pQCT); 2) bone strength assessed by finite element analysis, and 3) areal bone mineral density by dual X-ray absorptiometry (DXA). Secondary aims are to understand whether vitamin D₃ supplementation improves parameters of bone microarchitecture, balance, physical function and quality of life. Participants are men and women aged 55-70 years, with women at least 5-years post-menopause. The intervention is daily vitamin D₃ supplementation doses of 400, 4000 or 10,000 IU. Participants not achieving adequate dietary calcium intake are provided with calcium supplementation, up to a maximum supplemental dose of 600 mg elemental calcium per day. Results from this three-year study will provide evidence whether daily vitamin D₃ supplementation with adequate calcium intake can affect bone density, bone microarchitecture and bone strength in men and women. Furthermore, the safety of high dose daily vitamin D₃ supplementation will be explored.

Ethnic Differences in Peripheral Skeletal Development Among Urban South African Adolescents: A Ten-Year Longitudinal pQCT Study

There are no longitudinal pQCT data of bone growth and development from sub-Saharan Africa, where rapid environmental, societal, and economic transitions are occurring, and where fracture rates are predicted to rise. The aim of this study was to compare skeletal development in black and white South African adolescents using longitudinal data from the Birth to Twenty study. The Birth to Twenty Bone Health subcohort consisted of 543 adolescents (261 [178 black] girls, 282 [201 black] boys). Annual pQCT measurements of the radial and tibial metaphysis and diaphysis were obtained between ages 12 and 22 years (distal metaphysis: cross-sectional area [CSA] and trabecular bone mineral density [BMD]; diaphysis: total and cortical CSA, cortical BMD, and polar stress-strain index [SSIp]). Age at peak height velocity (APHV) was calculated to account for differences in maturational timing between ethnic groups and sexes. Mixed-effects models were used to describe trajectories for each pQCT outcome. Likelihood-ratio tests were used to summarize the overall difference in trajectories between black and white participants within each sex. APHV (mean ± SD years) was similar in black (11.8 ± 0.8) and white (12.2 ± 1.0) girls, but delayed in black (14.2 ± 1.0) relative to white boys (13.3 ± 0.8). By 4 years post-APHV, white adolescents had significantly greater cortical CSA and SSIp than black adolescents at the radius. There were no significant differences at the radial metaphysis but there was some divergence, such that black adolescents had greater radial trabecular BMD by the end of follow-up. At the tibia, white adolescents had lower diaphyseal CSA and SSIp, and greater metaphyseal CSA. There was no ethnic difference in tibial trabecular BMD. There are ethnic differences in bone growth and development, independent of maturation, in South African adolescents. This work gives new insights into the possible etiology of childhood fractures, which occur most commonly as peripheral sites. © 2017 The Authors. Journal of Bone and Mineral Research Published by Wiley Periodicals Inc.

Cross-sectional Versus Longitudinal Change in a Prospective HR-pQCT Study

Longitudinal studies assessing age-related changes using high-resolution peripheral quantitative computed tomography (HR-pQCT) provide novel insight compared with cross-sectional analyses. The purpose of this cohort study was 1) to determine individuals' change in HR-pQCT parameters over 5 years relative to least significant change (LSC), and 2) to evaluate if predicted rate of change from cross-sectional data is comparable to actual change from longitudinal investigation. A cohort of 466 (162 male, 304 female) participants completed two HR-pQCT scans with 5 years between assessments. After image registration, standard and cortical morphological analyses were conducted. Rate of bone microarchitectural change was compared between cross-sectional models and actual change calculated from longitudinal analyses. At the young end of the life span, we observed gains in total bone density of +0.2% to +2.9% per year, whereas the older participants (aged >50 years) lost total bone density at a rate of -0.3% to -1.3% per year. Declines in total bone density begin at age 40 years in females and 60 years in males, and significant adaptation was found at both ends of the age spectrum with respect to the LSC. Models predicting rate of change from cross-sectional data were similar to the actual change reported in this longitudinal study for total density and cortical thickness at the radius and cortical density at the tibia, but we found that changes in comparison to our 5-year longitudinal results were often overestimated from cross-sectional data. Studies aimed at observing age-related changes in a normative cohort, especially in a follow-up period of less than 5 years, are better to focus on the tibia rather than the radius because of the increased sensitivity to change at the tibia. © 2017 American Society for Bone and Mineral Research.