Efficient photocatalytic degradation of Acid Red 57 using synthesized ZnO nanowires

Visible-light induced effective and sustainable remediation of nitro organics pollutants using Pd-doped ZnO nanocatalyst

Nitroaromatic compounds represent a class of highly toxic pollutants discharged into aquatic environments by various industrial activities, posing significant threats to ecological integrity and human health due to their persistent and hazardous nature. In this study, Pd-doped ZnO nanoparticles were investigated as a potential solution for the degradation of nitro organics, offering heightened photocatalytic efficacy and prolonged stability. The synthesis of Pd-doped ZnO NPs was achieved via the hydrothermal method, with subsequent analysis through XRD spectra and XPS confirming successful Pd doping within the ZnO matrix. Characterization through FESEM and HRTEM unveiled the heterogeneous morphologies of both undoped and Pd-doped ZnO nanoparticles. Additionally, UV-vis and PL spectroscopy provided insights into the optical properties, chemical bonding, and defect structures of the synthesized Pd-doped ZnO NPs. Pd doping induces a redshift in ZnO's absorption spectra, reducing the bandgap from 3.12 to 2.94 eV as Pd concentration rises from 0 to 0.2 wt.%. The photocatalytic degradation, following pseudo-first-order kinetics, achieved 90% nitrobenzene abatement (200 µg/L, pH 7) under visible light within 320 min with a catalyst loading of 16 µg/mL. The photocatalytic efficacy of 0.08 wt% Pd-doped ZnO (k = 0.058 min⁻1) exhibited a 25-fold enhancement compared to bare ZnO (k = 3.1 × 10-4 min-1). Subsequent quenching and ESR experiments identified hydroxyl radicals (OH•) as the predominant active species in the degradation mechanism. Mass spectrometry analysis unveiled potential breakdown intermediates, illuminating a plausible degradation pathway. The investigated Pd-doped ZnO nanoparticles demonstrated reusability for up to five successive treatment cycles, offering a sustainable solution to nitro organics contamination challenges.

A Review of Synthesis Methods, Modifications, and Mechanisms of ZnO/TiO2-Based Photocatalysts for Photodegradation of Contaminants

The environment being surrounded by accumulated durable waste organic compounds has become a critical crisis for human societies. Generally, organic effluents of industrial plants released into the water source and air are removed by some physical and chemical processes. Utilizing photocatalysts as cost-effective, accessible, thermally/mechanically stable, nontoxic, reusable, and powerful UV-absorber compounds creates a new gateway toward the removal of dissolved, suspended, and gaseous pollutants even in trace amounts. TiO2 and ZnO are two prevalent photocatalysts in the field of removing contaminants from wastewater and air. Structural modification of the photocatalysts with metals, nonmetals, metal ions, and other semiconductors reduces the band gap energy and agglomeration and increases the affinity toward organic compounds in the composite structures to expand their usability on an industrial scale. This increases the extent of light absorbance and improves the photocatalytic efficiency. Selecting a suitable synthesis method is necessary to prepare a target photocatalyst with distinct properties such as high specific surface area, numerous surface functional groups, and an appropriate crystalline phase. In this Review, significant parameters for the synthesis and modification of TiO2- and ZnO-based photocatalysts are discussed in detail. Several proposed mechanistic routes according to photocatalytic composite structures are provided. Some electrochemical analyses using charge carrier trapping agents and delayed recombination help to plot mechanistic routes according to the direction of photoexcited species (electron-hole pairs) and design more effective photocatalytic processes in terms of cost-effective photocatalysts, saving time and increasing productivity.

Nickel-doped red mud-based Prussian blue analogues heterogeneous activation of H2O2 for ciprofloxacin degradation: waste control by waste

Red mud (RM) is a typical bulk solid waste with Fe/Al/Si/Ca-rich characteristics that has been used to prepare various heterogeneous catalysts such as iron-based catalysts and supported catalysts. Prussian blue analogues (PBA) is a low-cost, environmentally friendly, and active site rich iron-based metal organic framework, but its catalytic properties are adversely affected by their easy aggregation. In this study, nickel-doped RM-based PBA (RM-Ni PBA) was synthesized by acid dissolution-coprecipitation method for the degradation of ciprofloxacin (CIP). The characterization showed that RM-Ni PBA was a material with excellent dispersibility, large specific surface area, and abundant active sites. The degradation results showed that the removal efficiency of CIP in the RM-Ni PBA/H2O2 system was 16.63, 1.78, and 1.81 times that of RM, RM-PB, and Ni PBA, respectively. It was found that 1O2 was the main reactive oxygen species (ROS) dominated the degradation process, and its formation was accompanied by the mutual conversion of Ni(II)/Fe(II) and Ni(III)/Fe(III). Notably, the degradation process maintained a satisfactory efficiency over a wide pH range (3-9) and exhibited strong anti-interference ability against impurities such as Cl-, SO42-, and NO3-. The components and contents of RM-Ni PBA remained relatively stable during the degradation process. In addition, the degradation intermediates of CIP were identified, and possible degradation pathways were proposed. This study is expected to provide theoretical basis and technical guidance for the application of RM-based heterogeneous catalyst in the treatment of antibiotic wastewater.

Removal of Cr(VI) from aqueous solution using ball mill modified biochar: multivariate modeling, optimization and experimental study

Chromium (Cr(VI)) pollution has attracted wide attention due to its high toxicity and carcinogenicity. Modified biochar has been widely used in the removal of Cr(VI) in water as an efficient and green adsorbent. However, the existing biochar prepared by chemical modification is usually complicated in process, high in cost, and has secondary pollution, which limits its application. It is urgent to explore modified biochar with simple process, low cost and environmental friendliness. Therefore, ball milling wheat straw biochar (BM-WB) was prepared by ball milling technology in this paper. The adsorption characteristics and mechanism of Cr(VI) removal by BM-WB were analyzed by functional group characterization, adsorption model and response surface method. The results showed that ball milling effectively reduced the particle size of biochar, increased the specific surface area, and more importantly, enhanced the content of oxygen-containing functional groups on the surface of biochar. After ball milling, the adsorption capacity of Cr(VI) increased by 3.5-9.1 times, and the adsorption capacity reached 52.21 mg/g. The adsorption behavior of Cr(VI) follows the pseudo-second-order kinetics and Langmuir isotherm adsorption model rate. Moreover, the Cr(VI) adsorption process of BM-WB is endothermic and spontaneous. Under the optimized conditions of pH 2, temperature 45 °C, and adsorbent dosage 0.1 g, the removal rate of Cr(VI) in the solution can reach 100%. The mechanism of Cr(VI) adsorption by BM-WB is mainly based on electrostatic attraction, redox and complexation. Therefore, ball milled biochar is a cheap, simple and efficient Cr(VI) removal material, which has a good application prospect in the field of remediation of Cr(VI) pollution in water.

Bio-synthesized ZnO nanoparticles and sunlight-driven photocatalysis for environmentally-friendly and sustainable route of synthetic petroleum refinery wastewater treatment

The design of a green photocatalytic system that harnesses renewable and eco-friendly constituents holds the potential to offer valuable insights into alternative strategies for treating toxic multi-components in refinery water effluents. A significant challenge in implementing a practical and viable approach is the utilization of solar energy-an abundant, natural, and cost-effective resource-for photochemical processes within advanced oxidation processes. In this study, we explored the use of zinc oxide nanoparticles (ZnO NPs) as photocatalyst prepared via an environmentally friendly synthesis approach, resulting in the formation of crystalline wurtzite nanoparticles, with an average size of about 14 nm relatively spherical in shape. Notably, the extract derived from Moringa oleifera was employed in this investigation. These nanoparticles were characterized and validated using various characterization techniques, including X-ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. For comparison, conventionally synthesized ZnO NPs were also included in the evaluations. The findings reveal that, under illumination, biosynthesized ZnO nanoparticles (NPs) exhibit photocatalytic performance in effectively breaking down the organic compounds present in synthetic petroleum wastewater. Photochemical analysis further illustrates the degradation efficiency of Green-ZnO, which, within 180 min of irradiation resulted in 51%, 52%, 88%, and 93% of removal for Phenol, O-Cresol. Under optimal loading conditions, NPs produced via the green synthesis approach perform better when compared to chemically synthesized ZnO. This significant improvement in photocatalytic activity underscores the potential of eco-friendly synthesis methods in achieving enhanced water treatment efficiency.

Regulation of friction pair to promote conversion of mechanical energy to chemical energy on Bi2WO6 and realization of enhanced tribocatalytic activity to degrade different pollutants

Recently, friction-induced tribocatalysis has received tremendous attention through converting mechanical energy to chemical energy. However, its efficiency is much lower than those of photocatalysis and piezocatalysis, and its environmental application is limited in dye degradation. Herein, we developed a facile approach to improve the tribocatalytic activity of Bi2WO6 via adding trace polymer powders to form friction pairs with Bi2WO6. Among various polymers, PTFE was demonstrated to be the best counterpart of Bi2WO6. Subsequently, the PTFE dosage, stirring rate, magnetic bar size and number, and stirring mode were further optimized. The PTFE-promoted Bi2WO6 tribocatalysis was verified to possess excellent performance not only for removing different dyes, but also for degrading chlorophenols that are typical persistent organic pollutants. Multiple uses of the recycled catalysts indicated its good stability and prominent tribocatalytic durability. EPR measurements suggested the generation of hydroxyl radical and superoxide radical, which were determined to be continuously generated within 12 h at the rates of 0.88 μM h-1 and 85 μM h-1, respectively. Subsequently, a possible mechanism was proposed to explain the enhanced performance of the PTFE-promoted Bi2WO6 tribocatalysis. Finally, on basis of the detected intermediates, the degradation pathways of Rhodamine B and 2,4-Dichlorophenol during tribocatalysis were suggested.

Application of dewatered paper sludge-derived porous solid base catalyst for biodiesel production: Physicochemical properties, reaction kinetics and thermodynamic studies

A new porous solid base catalyst was prepared using dewatered paper sludge and successfully employed to produce biodiesel from soybean oil. The as-prepared catalyst was characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transforms infrared spectroscopy, X-ray photoelectron spectroscopy, thermal gravity/differential thermal gravity analysis, Brunauer-Emmet-Teller analysis, and CO2-temperature programmed analysis. The results showed that the formation of CaO and uniformly distributed porous structure should account for the high catalytic activity of the as-prepared catalyst. The optimum reaction conditions were observed at 180 ℃, 8 wt.% catalyst/oil weight ratio, 16:1 methanol/oil molar ratio, and 300 min reaction time with 91.6% biodiesel yield. After being used several times and recycled, the regenerated catalyst still exhibited effective catalytic activity without apparent deactivation. The kinetic study confirmed that the experimental data satisfied with Pseudo-first-order kinetic model controlled by reaction temperature and catalyst/oil weight ratio. The reaction activation energy was 24.98 kJ/mol. The change of enthalpy ΔH (14.98 kJ/mol), entropy ΔS (-208.57 J/mol/K), and Gibbs free energy ΔG (109.46 kJ/mol) indicated that the transesterification reaction catalyzed by the dewatered paper sludge-derived catalyst is endothermic, endergonic, and non-spontaneous. Our research finding indicated that the CaO-based catalyst derived from dewatered paper sludge was an economically promising and eco-friendly solid base catalyst for biodiesel production.

Sustainable and energy-efficient photocatalytic degradation of textile dye assisted by ecofriendly synthesized silver nanoparticles

In this study, we have touched on two goals of sustainable development, namely, the provision of clean water and sanitation and clean energy at acceptable prices, hoping for good health for all ages. A green economical method was used to prepare silver nanoparticles from chitosan biopolymer. AgNPs were fully characterized using UV-Vis, FTIR, XRD, HR-TEM, and EDX analysis. Different concentrations (0.02-0.18 g/L) of the nanoparticles were integrated into a mixture of heterogeneous nano photocatalysts TiO₂ and ZnO (1:1 weight ratio) under UV irradiation for the photocatalytic degradation of Acid Red 37 textile dye to obtain clean water. The kinetic description of the performed photocatalytic process was presented assuming a pseudo-first-order reaction. The data revealed that increasing the concentration of AgNPs in the catalytic mixture showed a high apparent rate constant (k_app) accompanied by an increase in the apparent quantum yield (%Q_app), followed by dye destruction after a very short time (t_0.5 = 3 min). Since the photocatalytic degradation process consumes electrical energy, the electrical energy per order (EE/O) was calculated, showing a low value of 20 kWh/m³/order, using 0.18 g/L AgNPs, indicating that the elicited photocatalytic degradation method is a sustainable one for the mineralization of the targeted dye.

Novel modeling and optimization framework for Navy Blue adsorption onto eco-friendly magnetic geopolymer composite

The disproportionate potency of dyes in textile wastewater is a global concern that needs to be contended. The present study comprehensively investigates the adsorption of Navy-Blue dye (NB) onto bentonite clay based geopolymer/Fe₃O₄ nanocomposite (GFC) using novel statistical and machine learning frameworks in the following steps; (1) synthesis and characterization of GFC, (2) experimental testing and modelling of NB adsorption onto GFC following Box-Behnken design and three response surface prediction models namely stepwise regression analysis (SRA), Support vector regression (SVR) and Kriging (KR), (3) parametric, sensitivity, thermodynamic and kinetic analysis of pH, GFC dose and contact time on adsorption performance, and (4) finding global parametric solution of the process using Latin Hypercube, Sobol and Taguchi orthogonal array sampling and combining SRA-SVR-KR predictions with novel hybrid simulated annealing (SA)-desirability function (DF) approach. Under the given testing range, parametric/sensitivity analysis revealed the critical role of pH over others accounting ∼37% relative effect and primarily derived the NB adsorption. The statistical evaluation of models revealed that all models could be utilized for elucidating and predicting the NB removal using GFC, however, SVR accuracy was better among others for this particular work, as the overall computed root mean squared error was only 0.55 while the error frequency counts remained <1 for 90% predictions. GFC showed 86.29% NB removal for the given experimental matrix which can be elevated to 96.25% under optimum conditions. The NB adsorption was found to be physical, spontaneous, favorable and obeyed pseudo-2nd order kinetics. The results demonstrate the suitability of GFC as the promising cost-effective and efficient alternative for the decolourization of urban and drinking water streams and elucidate the potential of machine learning models for accurate prediction & elevation of adsorption processes with less experimentation in water purification applications.

Mineralization of Riluzole by Heterogeneous Fenton Oxidation Using Natural Iron Catalysts

Fenton (H2O2/Fe2+) system is a simple and efficient advanced oxidation technology (AOT) for the treatment of organic micropollutants in water and soil. However, it suffers from some drawbacks including high amount of the catalyst, acid pH requirement, sludge formation and slow regeneration of Fe2+ ions. If these drawbacks are surmounted, Fenton system can be the best choice AOT for the removal of persistent organics from water and soil. In this work, it was attempted to replace the homogeneous catalyst with a heterogeneous natural iron-based catalyst for the decomposition of H2O2 into oxidative radical species, mainly hydroxyl (HO•) and hydroperoxyl radicals (HO2•). The natural iron-based catalyst is hematite-rich (α-Fe2O3) and contains a nonnegligible amount of magnetite (Fe3O4) indicating the coexistence of Fe (III) and Fe(II) species. A pseudo-first order kinetics was determined for the decomposition of H2O2 by the iron-based solid catalyst with a rate constant increasing with the catalyst dose. The catalytic decomposition of H2O2 into hydroxyl radicals in the presence of the natural Fe-based catalyst was confirmed by the hydroxylation of benzoic acid into salicylic acid. The natural Fe-based catalyst/H2O2 system was applied for the degradation of riluzole in water. It was demonstrated that the smaller the particle size of the catalyst, the larger its surface area and the greater its catalytic activity towards H2O2 decomposition into hydroxyl radicals. The degradation of riluzole can occur at all pH levels in the range 3.0–12.0 with a rate and efficiency greater than H2O2 oxidation alone, indicating that the natural Fe-based catalyst can function at any pH without the need to control the pH by the addition of chemicals. An improvement in the efficiency and kinetics of the degradation of riluzole was observed under UV irradiation for both homogeneous and heterogeneous Fenton systems. The results chromatography analysis demonstrate that the degradation of riluzole starts by the opening of the triazole ring by releasing nitrate, sulfate, and fluoride ions. The reuse of the catalyst after heat treatment at 500 °C demonstrated that the heat-treated catalyst retained an efficiency >90% after five cycles. The results confirmed that the natural sources of iron, as a heterogeneous catalyst in a Fenton-like system, is an appropriate replacement of a Fe2+ homogeneous catalyst. The reuse of the heterogeneous catalyst after a heat-treatment represents an additional advantage of using a natural iron-based catalyst in Fenton-like systems.

ZnO Nanostructures Doped with Various Chloride Ion Concentrations for Efficient Photocatalytic Degradation of Methylene Blue in Alkaline and Acidic Media

In this study, chloride (Cl−) ions were successfully doped into ZnO nanostructures by the solvothermal method. The effect of various Cl− concentrations on the photocatalytic activity of ZnO towards the photodegradation of methylene blue (MB) under the illumination of ultraviolet light was studied. The as-prepared Cl−-doped ZnO nanostructures were analyzed in terms of morphology, structure, composition and optical properties. XRD data revealed an average crystallite size of 23 nm, and the XRD patterns were assigned to the wurtzite structure of ZnO even after doping with Cl−. Importantly, the optical band gap of various Cl ion-doped ZnO nanostructures was successively reduced from 3.42 to 3.16 eV. The photodegradation efficiency of various Cl− ion-doped ZnO nanostructures was studied for MB in aqueous solution, and the relative performance of each Cl ion-doped ZnO sample was as follows: 20% Cl−-doped ZnO > 15% Cl−-doped ZnO > 10% Cl−-doped ZnO > 5% Cl−-doped ZnO > pristine ZnO. Furthermore, the correlation of the pH of the MB solution and each Cl ion dopant concentration was also investigated. The combined results of varying dopant levels and the effect of the pH of the MB solution on the photodegradation process verified the crucial role of Cl− ions in activating the degradation kinetics of MB. Therefore, these newly developed photocatalysts could be considered as alternative materials for practical applications such as wastewater treatment.

A sustainable remediation of Congo red dye using magnetic carbon nanodots and B. pseudomycoides MH229766 composite: mechanistic insight and column modelling studies

In the present investigation, a biocomposite, magnetic carbon nanodot immobilized Bacillus pseudomycoides MH229766 (MCdsIB) was developed and consequently characterized using SEM-EDX, FTIR, XRD, and VSM analyses to effectively biotreat hazardous Congo red (CR) dye present in water bodies. The adsorptive efficiency of MCdsIB for the detoxification of CR from wastewater was investigated both in batch and column schemes. Optimum batch parameters were found as pH 3, 50 mg L-1 dye concentration, 150 min equilibrium time, and 2 g L-1 MCdsIB dosage. The Freundlich isotherm model best fit the experimental data, and the maximum adsorption capacity of MCdsIB was observed as 149.25 mg g-1. Kinetic data were in accordance with the pseudo-second-order model where the adsorption rate reduced with the rise in the initial concentration of dye. Intra-particle diffusion was discovered as the rate-limiting step following 120 min of the adsorption process. Furthermore, despite being used continually for five consecutive cycles, MCdsIB demonstrated excellent adsorption capacity (> 85 mg g-1), making it an outstanding recyclable material. The CR dye was efficiently removed in fixed-bed continuous column studies at high influent CR dye concentration, low flow rate, and high adsorbent bed height, wherein the Thomas model exhibited an excellent fit with the findings acquired in column experiments. To summarize, the current study revealed the effectiveness of MCdsIB as a propitious adsorbent for CR dye ouster from wastewater.

Adsorption Characteristics and Enrichment of Emodin from Marine-Derived Aspergillus flavipes HN4-13 Extract by Macroporous Resin XAD-16

Emodin, a hydroxyanthraquinone derivative, has been used as medicine for more than 2000 years due to its extensive pharmacological activities. Large-scale production of emodin has been achieved by optimizing the fermentation conditions of marine-derived Aspergillus flavus HN4-13 in a previous study. However, the fermentation broth contained complex unknown components, which adversely affected the study of emodin. Herein, the conditions for the enrichment of emodin from A. flavipes HN4-13 extract using XAD-16 resin were optimized, and a separation method with high efficiency, simple operation, a low cost, and a large preparative scale was established. The adsorption process of emodin on the XAD-16 resin conformed to pseudo-second-order kinetics and Langmuir models. The optimal conditions for the adsorption process were as follows: An emodin concentration, flow rate, and loading volume of 0.112 mg/mL, 2 BV/h, and 10 BV, respectively. For desorption, 50% ethanol was used to elute impurities and 80% ethanol was used to desorb emodin. After enrichment with XAD-16 resin, the emodin content increased from 1.16% to 11.48%, and the recovery rate was 75.53% after one-step treatment. These results demonstrate the efficiency of the simple adsorption–desorption strategy, using the XAD-16 resin for emodin enrichment.

Synergistic Piezo-Photocatalysis of BiOCl/NaNbO3 Heterojunction Piezoelectric Composite for High-Efficient Organic Pollutant Degradation

Piezo-photocatalytic technique is a new-emerging strategy to alleviate photoinduced charge recombination and thus enhance catalytic performance. The heterojunction construction engineering is a powerful approach to improve photocatalytic performance. Herein, the BiOCl/NaNbO₃ with different molar ratios piezoelectric composites were successfully synthesized by hydrothermal methods. The piezo/photodegradation rate (k value) of Rhodamine B (RhB) for BiOCl/NaNbO₃ (BN-3, 0.0192 min⁻¹) is 2.2 and 5.2 times higher than that of BiOCl (0.0089 min⁻¹) and NaNbO₃ (0.0037 min⁻¹), respectively. The enhanced performance of BN-3 composite can be attributed to the heterojunction construction between BiOCl and NaNbO₃. In addition, the piezo/photodecomposition ratio of RhB for BN-3 (87.4%) is 8.8 and 2.2 times higher than that of piezocatalysis (9.9%) and photocatalysis (40.4%), respectively. We further investigated the mechanism of piezocatalysis, photocatalysis, and their synergy effect of BN-3 composite. This study favors an in-depth understanding of piezo-photocatalysis, providing a new strategy to improve the environmental pollutant remediation efficiency of piezoelectric composites.

Preparation of multifunctional long-persistent photoluminescence cellulose fibres

Simple preparation of flame-retardant, photoluminescent, and superhydrophobic smart nanocomposite coating was developed and applied onto cotton fibres using the simple pad-dry-cure technique. This novel strategy involved the immobilization of rare-earth-doped aluminium strontium oxide (ASO; SrAl₂ O₄ :Eu⁺² ,Dy⁺³ ) nanoparticles, environmentally friendly room temperature vulcanizing silicone rubber (RTV) and environmentally friendly Exolet AP422 (Ex). The fabrics were also able to produce a char film in the fire-resistant assessment, providing fibres with a self-extinguishing characteristic. Furthermore, the fire-retardant performance of the coated cotton samples remained resistant to washing over 35 laundry cycles. The superhydrophobicity of the treated fabrics was monitored to improve by increasing the photoluminescent phosphor nanoparticles. The produced transparent photoluminescent film displayed an absorption at 360 nm and an emission at 526 nm. The photoluminescent fabrics were observed to generate different colorimetric shades, including white, green-yellow and bright white as monitored by Commission Internationale de l'Éclairage laboratory colorimetric coordinates. Slow emissions were detected for the treated cotton fabrics as monitored by emission, ultraviolet-visible light absorption, lifetime, and decay time spectral profiles to indicate glow in the dark phosphorescence effect. Both comfort and mechanical properties of the coated fibres were evaluated by measuring their bending length and air permeability.

Photocatalytic degradation of p-nitrophenol using biologically synthesized ZnO nanoparticles

The present work deals with the photocatalytic degradation of p-nitrophenol as it is a United States Environmental Protection Agency-listed priority pollutant and has adverse environmental and health effects. To eradicate the detrimental environmental impact of p-nitrophenol, the biologically synthesized ZnO nanoparticles were used as a photocatalyst. The degradation of p-nitrophenol was confirmed by decreasing the absorbance value at a characteristic wavelength of 317 nm using the UV-vis spectrophotometer. Reaction parameters such as ZnO photocatalyst concentration of 0.1 g/L at pH 11 in the presence of H₂O₂ (5 mM) were found to be optimum conditions for p-nitrophenol degradation. The photocatalytic degradation was slowly enhanced in the presence of H₂O₂ as an electron acceptor. The kinetics of nitrophenol degradation was studied, which follows the pseudo-first-order reaction. The photocatalytic degradation of p-nitrophenol was characterized by using total organic carbon, chemical oxygen demand, and high-performance liquid chromatography analyses. This method is found to be effective as it is environmentally friendly, free of toxic chemicals.

Facile Controlling of the Physical Properties of Zinc Oxide and Its Application to Enhanced Photocatalysis

In this study, the physical properties of ZnO were facile controlled by the synthesis method with the addition of capping and precipitation agents. As-prepared ZnO samples had different morphologies such as carnation flower-like ZnO (CF-ZnO), rose-flower-like ZnO (RF-ZnO), rod-like ZnO (R-ZnO), and nanoparticle ZnO (N-ZnO) and were characterized by SEM, XRD, N₂ adsorption/desorption isotherms, FT-IR, and DR/UV-vis. All samples had a crystallite structure of hexagonal wurtzite type. The CF-ZnO and RF-ZnO samples had the hierarchical structure like a carnation flower and a beautiful rose, respectively. R-ZnO was composed of many hexagonal rods and few spherical particles, while N-ZnO microstructures were made up of nanoparticles with approximately 20-30 nm, exhibiting the largest surface area, pore volume, and pore width among as-prepared samples, and their crystal size and bandgap energy were 17.8 nm and 3.207 eV, respectively. The catalytic performances of ZnO samples were evaluated by degradation of Tartrazine (TA) and Caffeine (CAF) under low UV irradiation (15 W). N-ZnO showed a high photocatalytic activity compared to other samples. Besides, the reaction kinetics was investigated by the first-order kinetic model, and the catalytic performance of ZnO was evaluated through several organic pollutants.

A novel green approach based on ZnO nanoparticles and polysaccharides for photocatalytic performance

Novel green photocatalysts based on ZnO in the presence of arabic gum (AGZ) or karaya gum (KGZ) were synthesized by a sol-gel method for photocatalytic performance. The materials were characterized by XRD, FTIR spectroscopy, SEM, nitrogen adsorption/desorption, and PL and diffuse reflectance spectroscopy. Photocatalytic test was performed using methylene blue (MB) dye as the target pollutant under visible light. The reuse of photocatalysts and Artemia saline bioassays were investigated. The ZnO nanoparticles showed a hexagonal structure and the values of the band gaps were 2.95 (AGZ) and 2.98 eV (KGZ). The PL results demonstrated emission bands at 440, 473 or 478 and 549 nm. The textural properties indicated the presence of typically mesoporous materials. The MB discoloration efficiency was 81.5% and 91.0% for AGZ and KGZ, respectively. The photocatalytic activity of AGZ and KGZ was maintained after the third run. The ˙OH radicals are the main species involved in the MB discoloration. The MB discoloration from the photocatalysts showed no toxicity; therefore, they are considered to be promising materials for the degradation of the dye in the photocatalytic process.

Eco-friendly synthesis and photocatalytic application of flowers-like ZnO structures using Arabic and Karaya Gums

Flowers-like ZnO structures were synthesized using Arabic Gum (AGZnO) or Karaya Gum (KGZnO). The AGZnO and KGZnO were characterized by X-ray diffractometry, Fourier Transformed Infrared, Scanning Electron Microscopy, Photoluminescence, nitrogen adsorption/desorption and diffuse reflectance techniques. The materials were tested in the discoloration of Methylene Blue (MB) dye under visible light and scavenger studies were also performed. The toxicity of the MB irradiated was investigated in bioassays with Artemia salina. The structural characterization demonstrated the formation of hexagonal ZnO. All samples presented flower-like morphology with presence of mesopores identified by BET method. The optical properties indicated band gap of 2.99 (AGZnO) and 2.76 eV (KGZnO), and emission in violet, blue and green emissions also were observed. The KGZnO demonstrated better photocatalytic performance than the AGZnO, and scavenger studies indicated that OH radicals are the main species involved in the degradation of the pollutant model. The photodiscoloration of MB solution did not demonstrate toxicity. Therefore, KGZnO is a promising material for photocatalysis application.