Structure of the lepidopteran proboscis in relation to feeding guild

Diverse material properties and morphology of moth proboscises relates to the feeding habits of some macromoth and other lepidopteran lineages

Insects have evolved unique structures that host a diversity of material and mechanical properties, and the mouthparts (proboscis) of butterflies and moths (Lepidoptera) are no exception. Here, we examined proboscis morphology and material properties from several previously unstudied moth lineages to determine if they relate to flower visiting and non-flower visiting feeding habits. Scanning electron microscopy and three-dimensional imaging were used to study proboscis morphology and assess surface roughness patterns on the galeal surface, respectively. Confocal laser scanning microscopy was used to study patterns of cuticular autofluorescence, which was quantified with colour analysis software. We found that moth proboscises display similar autofluorescent signals and morphological patterns in relation to feeding habits to those previously described for flower and non-flower visiting butterflies. The distal region of proboscises of non-flower visitors is brush-like for augmented capillarity and exhibited blue autofluorescence, indicating the possible presence of resilin and increased flexibility. Flower visitors have smoother proboscises and show red autofluorescence, an indicator of high sclerotization, which is adaptive for floral tube entry. We propose the lepidopteran proboscis as a model structure for understanding how insects have evolved a suite of morphological and material adaptations to overcome the challenges of acquiring fluids from diverse sources.

Ultramorphology of the proboscis and sensilla of the Asian corn borer Ostrinia furnacalis (Lepidoptera: Crambidae)

The Asian corn borer, Ostrinia furnacalis (Guenée), is one of the most destructive lepidopteran pests affecting maize in Asia. Previous research on the feeding behavior of O. furnacalis has mostly focused on larvae, but the adult feeding preference has been unclear hitherto. In this study, we investigated the ultramorphology of the proboscis and sensilla of O. furnacalis using scanning electron microscopy and made morphological comparisons between the sexes, attempting to make predictions on the food preference and feeding behavior of the adults. The proboscis of O. furnacalis is divided into zones 1 and 2 with three types of sensilla, namely chaetica, basiconica, and styloconica. The entire proboscis and zone 2 of the females are significantly longer than those of the males. The main sexual difference in the sensilla is shown in the number of sensilla styloconica, which are eight in females but nine in males. The feeding preference of adult O. furnacalis is discussed based on the morphology of the proboscis and sensilla.

Adult rhinoceros beetles use a sweeping pattern to ingest high-viscosity fluid

More than half of all insect species utilize various natural liquids as primary diet. The concentrated liquids with energy-dense nutrition can provide highly favorable rewards, however, their high-viscosity poses challenges to the insect for ingesting. Here we show that rhinoceros beetles, Trypoxylus dichotomus (Coleoptera: Scarabaeidae), are capable of ingesting sugar solutions with viscosities spanning four orders of magnitude, exhibiting extraordinary adaptability to diverse natural liquid sources. We discovered a previously unidentified maxillae-sweeping motion that beetles preferentially adopt to consume highly viscous liquids, achieving a higher feeding rate than the more common direct sucking. By utilizing morphological characterizations, flow visualization, and fluid-structure coupling simulation, we revealed the underlying mechanisms of how this maxillary movement facilitates the transportation of viscous liquid. Our findings not only shed light on the multi-functionality of beetle mouthparts but also provide insights into the adaptability of generalized mouthparts to a broad range of fluid sources.

Wettability and morphology of proboscises interweave with hawkmoth evolutionary history

Hovering hawkmoths expend significant energy while feeding, which should select for greater feeding efficiency. Although increased feeding efficiency has been implicitly assumed, it has never been assessed. We hypothesized that hawkmoths have proboscises specialized for gathering nectar passively. Using contact angle and capillary pressure to evaluate capillary action of the proboscis, we conducted a comparative analysis of wetting and absorption properties for 13 species of hawkmoths. We showed that all 13 species have a hydrophilic proboscis. In contradistinction, the proboscises of all other tested lepidopteran species have a wetting dichotomy with only the distal ∼10% hydrophilic. Longer proboscises are more wettable, suggesting that species of hawkmoths with long proboscises are more efficient at acquiring nectar by the proboscis surface than are species with shorter proboscises. All hawkmoth species also show strong capillary pressure, which, together with the feeding behaviors we observed, ensures that nectar will be delivered to the food canal efficiently. The patterns we found suggest that different subfamilies of hawkmoths use different feeding strategies. Our comparative approach reveals that hawkmoths are unique among Lepidoptera and highlights the importance of considering the physical characteristics of the proboscis to understand the evolution and diversification of hawkmoths.

Antennal and proboscis sensilla characteristics of Paranthrene tabaniformis (Lepidoptera: Sesiidae)

The poplar clearwing moth, Paranthrene tabaniformis (Lepidoptera: Sesiidae) is a serious wood-boring pest of several trees. The ultramorphology of the antennae and proboscis sensilla of adult P. tabaniformis was examined using scanning electron microscope to determine their structures and sex-specific differences. The results showed that the antennae of both sexes are composed of three segments: scape, pedicel and flagellum. Female antennae are clavate while male antennae are pectinate. The number of flagellomeres for females was significantly greater than for males. Seven different types of sensilla were identified on antennae of both males and females: Böhm sensilla, sensilla squamiformia, sensilla trichodea (three subtypes), sensilla chaetica, sensilla coeloconica, and sensilla auricillica (two subtypes), and apical sensors. Three different types of sensilla were found on the proboscis of adult P. tabaniformis: sensilla styloconica, sensilla chaetica, and sensilla basiconica (three subtypes). The sexual dimorphism difference in the number, distributional pattern, the length and the basal width of various sensilla on the antennae and proboscis were determined. This study clarifies the types and sexual dimorphism of the antennal and proboscis sensilla of adult P. tabaniformis and provides useful theoretical foundations for studies on behavioral mechanisms and functions of sensilla of P. tabaniformis. RESEARCH HIGHLIGHTS: Various types of sensilla on the antennae and proboscis of adults Paranthrene tabaniformis were observed. The sexual dimorphism of various sensilla on the antennae and proboscis were determined.

Evolutionary functional morphology of the proboscis and feeding apparatus of hawk moths (Sphingidae: Lepidoptera)

The morphology of the proboscis and associated feeding organs was studied in several nectar-feeding hawk moths, as well as a specialized honey-feeder and two supposedly nonfeeding species. The proboscis lengths ranged from a few millimeters to more than 200 mm. Despite the variation in proboscis length and feeding strategy, the principle external and internal composition of the galeae, the stipes pump, and the suction pump were similar across all species. The morphology of the smooth and slender proboscis is highly conserved among all lineages of nectar-feeding Sphingidae. Remarkably, they share a typical arrangement of the sensilla at the tip. The number and length of sensilla styloconica are independent from proboscis length. A unique proboscis morphology was found in the honey-feeding species Acherontia atropos. Here, the distinctly pointed apex displays a large subterminal opening of the food canal, and thus characterizes a novel type of piercing proboscis in Lepidoptera. In the probably nonfeeding species, the rudimentary galeae are not interlocked and the apex lacks sensilla styloconica; galeal muscles, however, are present. All studied species demonstrate an identical anatomy of the stipes, and suction pump, regardless of proboscis length and diet. Even supposedly nonfeeding Sphingidae possess all organs of the feeding apparatus, suggesting that their proboscis rudiments might still be functional. The morphometric analyses indicate significant positive correlations between galea lumen volume and stipes muscle volume as well as the volume of the food canal and the muscular volume of the suction pump. Size correlations of these functionally connected organs reflect morphological fine-tuning in the evolution of proboscis length and function.

Ultramorphological Comparison of Proboscis and Associated Sensilla of Scotogramma trifolii and Protoschinia scutosa (Lepidoptera: Noctuidae)

Simple Summary

The clover cutworm, Scotogramma trifolii Rottemberg, and the spotted clover moth, Protoschinia scutosa (Denis & Schiffermuller), are worldwide polyphagous pests, and the larvae feed mainly on the leaf backs of many agricultural crops. However, the food sources and feeding habits of the adults are still poorly known. We investigated the ultramorphology of the proboscis and associated sensilla of S. trifolii and P. scutosa using scanning electron microscopy. The results show that the proboscises of S. trifolii and P. scutosa are structurally similar, both including three sensillum types and three zones (Zone 1–3). The sensillum chaeticum is non-porous hair-like, the sensillum basiconicum is a short smooth cone with a sensory pore on the blunt tip, and each sensillum styloconicum is composed of a uniporous sensory cone inserted into a ribbed stylus. In addition, the movement and fluid uptake mechanisms of the proboscis and the possible function of sensilla are briefly discussed.

Abstract

The proboscis is an important feeding organ for the glossatan moths, mainly adapted to the flower and non-flower visiting habits. The clover cutworm, Scotogramma trifolii Rottemberg, and the spotted clover moth, Protoschinia scutosa (Denis & Schiffermuller), are serious polyphagous pests, attacking numerous vegetables and crops, resulting in huge economic losses. However, the feeding behavior and mechanisms of the adult stage remain unsatisfactorily explored. In this study, the proboscis morphology of S. trifolii and P. scutosa are described in detail using scanning electron microscopy, with the aim of investigating the morphological differences and feeding behavior of these two species. The proboscises of S. trifolii and P. scutosa are similar in morphology and structure and are divided into three zones (Zone 1–3) based on the morphological changes of the dorsal legulae. Three sensillum types are located on the proboscises of both species, sensilla chaetica, sensilla basiconica, and sensilla styloconica. Significant differences were observed in the length of the proboscis and each zone between these two species, as well as in sensilla size and number. Based on the morphology of the proboscis and associated sensilla, S. trifolii and P. scutosa are potential flower visitors, which was also reinforced by the pollen observed at the proboscis tip. These results will strengthen our understanding of the structure of the proboscis related to the feeding behavior of Noctuidae.

Elastocapillary effect in self-repair of proboscises of butterflies and moths

HYPOTHESIS

Self-repair in living organisms, without tissue regeneration or regrowth, is rare. Recent discovery that butterflies can self-repair the proboscis after the two halves (galeae) have been separated raised a question about the physical mechanism allowing them to reunite the parts. We discovered that butterflies pump saliva during repair of their proboscises. We then hypothesized that saliva spreading along the food canal of the proboscis would create capillary forces capable of bringing the galeae together.

EXPERIMENT

To test the hypothesis, we distinguished capillary forces from muscular action of the galeae by sedating butterflies and video tracking retraction of the saliva menisci during galeal separation. To theoretically show capillary adhesion, the elastic moduli of the galeae were measured, and the galeal profiles were extracted from videos as a function of time. The values were then fitted with a mathematical model based on an augmented Euler-Bernoulli beam theory whereby each galea was treated as a beam bent by capillary forces due to saliva. We also evaluated friction forces that prevented disjoining of the galea at the tip of their separation.

FINDINGS

The results showed that butterflies use saliva to repair their proboscises via capillary adhesion, and theoretically supported the role of saliva in providing the necessary capillary forces to bring the galeae together. Tangential shear forces acting parallel to the galea at the tip of their separation are caused primarily by friction between the cuticular linking structures.

Sensilla of the antenna and proboscis of Athetis lepigone (Möschler) (Lepidoptera: Noctuidae)

Sensory structures on the antennae and mouthparts of insects are associated with various activities, such as host location, feeding, attracting a mate, and identifying a suitable oviposition site. Athetis lepigone (Möschler) is an important polyphagous Eurasian pest with more than 30 species of host plants. The larvae target bud leaves, prop roots, and tender stems of many agricultural crops, but the feeding habits of the adults remain poorly known. Aiming to understand the feeding behavior of the species, we investigated the fine morphology of its antennae and proboscis using scanning electron microscopy. The antennae of both sexes are filiform, and bear eight types of sensilla: Böhm's bristles, sensilla squamiformia, trichodea, chaetica, basiconica, coeloconica, styloconica, and auricillica. Sensilla trichodea are the most abundant among these sensillum types. The proboscis consists of two elongated, interlocked maxillary galeae that enclose the food canal by dorsal and ventral legulae. The external galeal surface is covered with numerous triangular microtrichia on Zone 1 and abundant blunt microbumps on Zone 2. The surface of the food canal bears closely connected and smooth semicircular ridges, gradually tapering toward the proboscis tip. Three types of sensilla are noticeable on the proboscis: sensilla trichodea, basiconica, and styloconica. We briefly discuss the putative functional significance of the antennal and proboscis sensilla and, based on the specific structural modifications of the proboscis, predict a flower-visiting habit for A. lepigone.

Measuring proboscis length in Lepidoptera: a review

Mouthpart morphologies relate to diet range. Differences among or within species may result in resource partitioning and speciation. In plant-pollinator interactions, mouthpart length has an important role in foraging efficiency, resource partitioning and pollination, hence measuring nectarivorous insect mouthparts’ morphological variation is important. Most adult lepidopterans feed on nectars and participate in pollination. Although a vast range of studies applied morphometric measurements on lepidopteran proboscis (tongue) length, general recommendations on methodologies are scarce. We review available proboscis length measurement methodologies for Lepidoptera. Focusing on how proboscides have been measured, how accurate the measurements were, and how were these constrained by sampling effort, we searched for research articles investigating lepidopteran proboscis length and extracted variables on the aims of measurements, preparation and measurement methodology, and descriptive statistics. Different methods were used both for preparation and measurements. Many of the 135 reviewed papers did not provide descriptions of the procedures applied. Research aims were different among studies. Forty-four percent of the studies measured dead specimens, 13% measured living specimens, and 43% were unclear. Fifteen percent of the studies used callipers, 9% rulers, 1% millimetre scales, 4% ocular micrometers, 3% drawings and 14% photographs; 55% were non-informative. We emphasise the importance to provide detailed descriptions on the methods applied. Providing guidelines for future sampling and measurements, we encourage fellow researchers planning measurements to take into account the effect of specimen preparation techniques on the results, define landmarks, consider resolution, accuracy, precision, choose an appropriate sample size and report details on methodology.

Lepidopteran mouthpart architecture suggests a new mechanism of fluid uptake by insects with long proboscises

Proboscises of many fluid-feeding insects share a common architecture: they have a partially open food canal along their length. This feature has never been discussed in relation to the feeding mechanism. We formulated and solved a fluid mechanics model of fluid uptake and estimated the time required to completely fill the food canal of the entire proboscis through the openings along its length. Butterflies and moths are taken as illustrative and representative of fluid-feeding insects. We demonstrated that the proposed mechanism of filling the proboscis with fluid through permeable lengthwise bands, in association with a thin film of saliva in the food canal, offers a competitive pathway for fluid uptake. Compared with the conventional mechanism of fluid uptake through apically restricted openings, the new mechanism provides a faster rate of fluid uptake, especially for long-tongued insects. Accordingly, long-tongued insects with permeable lengthwise bands would be able to more rapidly exploit a broader range of liquids in the form of films, pools, and discontinuous columns, thereby conserving energy and minimizing exposure to predators, particularly for hovering insects.

Ultrastructure of the proboscis sensilla of ten species of butterflies (Insecta: Lepidoptera)

The ultrastructure of the sensilla on the proboscis of ten species of butterflies, Iphiclides podalirius, Parara guttata, Colias fieldii, Celastrina oreas, Sasakia charonda, Tirumala limniace, Acraea issoria, Stichophthalma neumogeni, Callerebia suroia, and Libythea celtis, among five families were investigated using scanning electron microscopy. They were compared to reveal the morphological differences in the proboscis sensilla among these butterflies. Four distinct types of sensilla were found on the proboscis among these species. The types of proboscis sensilla of I. podalirius and T. limniace were sensilla chaetica, sensilla coeloconica, and sensilla basiconica. The types in the other eight species were sensilla chaetica, sensilla styloconica, and sensilla basiconica. The number of sensilla styloconica on the proboscis of non-flower-visiting species was greater than that of flower-visiting species.

Morphological comparison of proboscides and associated sensilla of Helicoverpa armigera and Mythimna separate (Lepidoptera: Noctuidae)

Proboscides are important feeding devices for most adult Lepidoptera and exhibit significant morphological modifications and types of sensilla associated with feeding habits. In this study the architectures of the proboscides and sensilla were compared between the cotton bollworm Helicoverpa armigera (Hübner) and the armyworm Mythimna separate (Walker) using scanning electron microscopy. The proboscides of both species consist of two elongated maxillary galeae joined by dorsal and ventral legulae, forming a food canal. The dorsal legulae in H. armigera disappear a short distance from the proboscis apex, whereas those in M. separate exist up to the apex. Three types of sensilla are present on the proboscides of both species: sensilla chaetica, basiconica, and styloconica. The morphological differences of the sensilla mainly concern the sensilla styloconica, whose styli have six to seven smooth-edged ridges in H. armigera but six serrate-edged ridges in M. separate. No significant sexual dimorphism was found in the proboscides and sensilla of both species except for the length of the zone without the dorsal legulae in H. armigera. The morphological similarities and differences of the proboscides and sensilla between the two species are briefly discussed.

Chemoreception of Mouthparts: Sensilla Morphology and Discovery of Chemosensory Genes in Proboscis and Labial Palps of Adult Helicoverpa armigera (Lepidoptera: Noctuidae)

Siphoning mouthparts, consisting of proboscis and labial palps, are the exclusive feeding organs and important chemosensory organs in most adult Lepidoptera. In this study, the general morphology of the mouthpart organs and precision architecture of the proboscis was described in adult Helicoverpa armigera. Three major sensilla types with nine subtypes including three novel subtypes were identified. The novel sensilla styloconica subtype 2 was the only one having a multiporous structure, which may play olfactory roles. For further understanding of the chemosensory functions of mouthpart organs, we conducted transcriptome analysis on labial palps and proboscises. A total of 84 chemosensory genes belonging to six different families including 4 odorant receptors (ORs), 6 ionotropic receptors (IRs), 7 gustatory receptors (GRs), 39 odorant binding proteins (OBPs), 26 chemosensory proteins (CSPs), and 2 sensory neuron membrane proteins (SNMPs) were identified. Furthermore, eight OBPs and six CSPs were identified as the novel genes. The expression level of candidate chemosensory genes in the proboscis and labial palps was evaluated by the differentially expressed gene (DEG) analysis, and the expression of candidate chemosensory receptor genes in different tissues was further investigated by quantitative real-time PCR (qRT-PCR). All the candidate receptors were detected by DEG analysis and qRT-PCR, but only a small part of the OR or IR genes was specifically or partially expressed in proboscis or labial palps, such as HarmOR58 and HarmIR75p.1, however, most of the GRs were abundantly expressed in proboscis or labial palps. The reported CO2 receptors such as HarmGR1, GR2, and GR3 were mainly expressed in labial palps. HarmGR5, GR6, and GR8, belonging to the "sugar receptor" clade, were mainly expressed in proboscis or antenna and were therefore suggested to perceive saccharide. The results suggest that the mouthparts are mutually cooperative but functionally concentrated system. These works contribute to the understanding of chemical signal recognition in mouthpart organs and provide the foundation for further functional studies.

Effect of curvature on wetting and dewetting of proboscises of butterflies and moths

Proboscises of butterflies are modelled as elliptical hollow fibres that can be bent into coils. The behaviour of coating films on such complex fibres is investigated to explain the remarkable ability of these insects to control liquid collection after dipping the proboscis into a flower or pressing and mopping it over a food source. By using a thin-film approximation with the air-liquid interface positioned almost parallel to the fibre surface, capillary pressure was estimated from the profile of the fibre surfaces supporting the films. The film is always unstable and the proboscis shape and movements have adaptive value in collecting fluid: coiling and bending of proboscises of butterflies and moths facilitate fluid collection. Some practical applications of this effect are discussed with regard to fibre engineering.

The Ingestion of Fluorescent, Magnetic Nanoparticles for Determining Fluid-uptake Abilities in Insects

Fluid-feeding insects ingest a variety of liquids, which are present in the environment as pools, films, or confined to small pores. Studies of liquid acquisition require assessing mouthpart structure and function relationships; however, fluid uptake mechanisms are historically inferred from observations of structural architecture, sometimes unaccompanied with experimental evidence. Here, we report a novel method for assessing fluid-uptake abilities with butterflies (Lepidoptera) and flies (Diptera) using small amounts of liquids. Insects are fed with a 20% sucrose solution mixed with fluorescent, magnetic nanoparticles from filter papers of specific pore sizes. The crop (internal structure used for storing fluids) is removed from the insect and placed on a confocal microscope. A magnet is waved by the crop to determine the presence of nanoparticles, which indicate if the insects are able to ingest fluids. This methodology is used to reveal a widespread feeding mechanism (capillary action and liquid bridge formation) that is potentially shared among Lepidoptera and Diptera when feeding from porous surfaces. In addition, this method can be used for studies of feeding mechanisms among a variety of fluid-feeding insects, including those important in disease transmission and biomimetics, and potentially other studies that involve nano- or micro-sized conduits where liquid transport requires verification.

Hypopharynx in termites: Morphological and functional aspects

The hypopharynx morphology in workers, pseudergates, and soldiers was described in six families of Isoptera using scanning electronic microscopy. This is the first comparative study to detail the hypopharynx among different species of termites, and included 4 one-piece type (OP) and 9 multiple-pieces type termites (MP). The results showed different arrangements of the hypopharynx trichomes, with fewer of these structures in the frontal region of the hypopharynx in pseudergates and soldiers of OP termites. These characteristics did not apply to Serritermes serrifer, since its pseudergates displayed a large quantity of trichomes on the frontal surface. This species may not resemble other OP termites because it does not live inside a piece of wood, but rather are inquilines inside Cornitermes spp. nests. Similar morphology of this mouthpart was observed in the different species of MP termites, with workers exhibiting many unidirectional trichomes on the frontal surface and soldiers presenting fewer of these trichomes. The morphology of the hypopharynx seems to reflect the lifestyle of these species, because MP termites are able to exploit external water sources. Since different arrangements of hypopharynx trichomes are used for water intake via capillary action, the present data reinforce the soldiers' dependence on workers to obtain water and food through the process of trophallaxis. Three different types of sensilla were observed on the lateral region of the hypopharynx: chaetica, basiconica and campaniformia. Chaetica act as chemoreceptors, while basiconica and campaniformia are mechanoreceptors, used in feeding and environmental perception. Better understanding of hypopharynx morphology permits the inference of ecological habits among OP and MP termites, and reflects the physiological differences between workers and soldiers.

Structural and physical determinants of the proboscis-sucking pump complex in the evolution of fluid-feeding insects

Fluid-feeding insects have evolved a unique strategy to distribute the labor between a liquid-acquisition device (proboscis) and a sucking pump. We theoretically examined physical constraints associated with coupling of the proboscis and sucking pump into a united functional organ. Classification of fluid feeders with respect to the mechanism of energy dissipation is given by using only two dimensionless parameters that depend on the length and diameter of the proboscis food canal, maximum expansion of the sucking pump chamber, and chamber size. Five species of Lepidoptera — White-headed prominent moth (Symmerista albifrons), White-dotted prominent moth (Nadata gibosa), Monarch butterfly (Danaus plexippus), Carolina sphinx moth (Manduca sexta), and Death’s head sphinx moth (Acherontia atropos) — were used to illustrate this classification. The results provide a rationale for categorizing fluid-feeding insects into two groups, depending on whether muscular energy is spent on moving fluid through the proboscis or through the pump. These findings are relevant to understanding energetic costs of evolutionary elaboration and reduction of the mouthparts and insect diversification through development of new habits by fluid-feeding insects in general and by Lepidoptera in particular.

Jamaica's Critically Endangered Butterfly: A Review of the Biology and Conservation Status of the Homerus Swallowtail (Papilio (Pterourus) homerus Fabricius)

The Homerus swallowtail, Papilio (Pterourus) homerus Fabricius, is listed as an endangered species and is endemic to the Caribbean island of Jamaica. The largest butterfly in the Western Hemisphere, P. homerus once inhabited seven of Jamaica's 14 parishes and consisted of at least three populations; however, now only two stronghold populations remain, a western population in the rugged Cockpit Country and an eastern population in the Blue and John Crow Mountains. Despite numerous studies of its life history, much about the population biology, including estimates of total numbers of individuals in each population, remains unknown. In addition, a breeding program is needed to establish an experimental population, which could be used to augment wild populations and ensure the continued survival of the species. Here, we present a review of the biology of P. homerus and recommendations for a conservation plan.

Mouthpart conduit sizes of fluid-feeding insects determine the ability to feed from pores

Fluid-feeding insects, such as butterflies, moths and flies (20% of all animal species), are faced with the common selection pressure of having to remove and feed on trace amounts of fluids from porous surfaces. Insects able to acquire fluids that are confined to pores during drought conditions would have an adaptive advantage and increased fitness over other individuals. Here, we performed feeding trials using solutions with magnetic nanoparticles to show that butterflies and flies have mouthparts adapted to pull liquids from porous surfaces using capillary action as the governing principle. In addition, the ability to feed on the liquids collected from pores depends on a relationship between the diameter of the mouthpart conduits and substrate pore size diameter; insects with mouthpart conduit diameters larger than the pores cannot successfully feed, thus there is a limiting substrate pore size from which each species can acquire liquids for fluid uptake. Given that natural selection independently favoured mouthpart architectures that support these methods of fluid uptake (Diptera and Lepidoptera share a common ancestor 280 Ma that had chewing mouthparts), we suggest that the convergence of this mechanism advocates this as an optimal strategy for pulling trace amounts of fluids from porous surfaces.