Do sharks exhibit heterodonty by tooth position and over ontogeny? A comparison using elliptic Fourier analysis

Growing out of the fins: Implications of isometric and allometric scaling of morphology relative to increasing mass in blue sharks (Prionace glauca)

Disproportional changes (i.e. allometry) in shark morphology relative to increasing body size have been attributed to shifts in function associated with niche shifts in life history, such as in habitat and diet. Photographs of blue sharks (Prionace glauca, 26-145 kg) were used to analyze changes in parameters of body and fin morphology with increasing mass that are fundamental to swimming and feeding. We hypothesized that blue sharks would demonstrate proportional changes (i.e. isometry) in morphology with increasing mass because they do not undergo profound changes in prey and habitat type; accordingly, due to geometric scaling laws, we predicted that blue sharks would grow into bodies with greater turning inertias and smaller frontal and surface areas, in addition to smaller spans and areas of the fins relative to mass, which are parameters that are associated with the swimming performance in sharks. Many aspects of morphology increased with isometry. However, blue sharks demonstrated negative allometry in body density, whereas surface area, volume and roll inertia of the body, area, span and aspect ratio of both dorsal fins, span and aspect ratio of the ventral caudal fin, and span, length and area of the mouth increased with positive allometry. The dataset was divided in half based on mass to form two groups: smaller and larger sharks. Besides area of both dorsal fins, relative to mass, larger sharks had bodies with significantly greater turning inertia and smaller frontal and surface areas, in addition to fins with smaller spans and areas, compared to smaller sharks. In conclusion, isometric scaling does not necessarily imply functional similarity, and allometric scaling may sometimes be critical in maintaining, rather than shifting, function relative to mass in animals that swim through the water column.

Are shark teeth proxies for functional traits? A framework to infer ecology from the fossil record

Modern sharks have an evolutionary history of at least 250 million years and are known to play key roles in marine systems, from controlling prey populations to connecting habitats across oceans. These ecological roles can be quantified based on their functional traits, which are typically morphological (e.g., body size) or behavioural (e.g., feeding and diet). Nonetheless, the understanding of such roles of extinct sharks is limited due to the inherent incompleteness of their fossil record, which consists mainly of isolated teeth. As such, establishing links between tooth morphology and ecological traits in living sharks could provide a useful framework to infer sharks' ecology from the fossil record. Here, based on extant sharks from which morphological and behavioural characteristics are known, the authors assess the extent to which isolated teeth can serve as proxies for functional traits. To do so, they first review the scientific literature on extant species to evaluate the use of shark dental characters as proxies for ecology to then perform validation analyses based on an independent data set collected from museum collections. Their results reveal that 12 dental characters have been used in shark literature as proxies for three functional traits: body size, prey preference and feeding mechanism. From all dental characters identified, tooth size and cutting edge are the most widely used. Validation analyses suggest that seven dental characters - crown height, crown width, cutting edge, lateral cusplets, curvature, longitudinal outline and cross-section outline - are the best proxies for the three functional traits. In particular, tooth size (crown height and width) was found to be a reliable proxy of all three traits; the presence of serrations on the cutting edge was one of the best proxies for prey preference; and tooth shape (longitudinal outline) and the presence of lateral cusplets were among the best indicators of feeding mechanism. Overall, the authors' results suggest that in the absence of directly measurable traits in the fossil record, these seven dental characters (and different combinations of them) can be used to quantify the ecological roles of extinct sharks. This information has the potential to provide key insights into how shark functional diversity has changed through time, including their ecological responses to extinction events.

Observations on heterodonty within the dentition of the Atlantic Sharpnose Shark, Rhizoprionodon terraenovae (Richardson, 1836), from the north-central Gulf of Mexico, USA, with implications on the fossil record

The Atlantic Sharpnose Shark, Rhizoprionodon terraenovae (Richardson, 1836), is the most common small coastal requiem shark in the north-central Gulf of Mexico, USA. Despite this fact, little is known about the dental variation within this taxon. To help rectify this shortcoming, we examined 126 male and female R. terraenovae jaws sets across all maturity stages to document the various types of heterodonty occurring in the dentition of this taxon. Quantitative data gathered from a subset of our sample allowed for us to place teeth within the dentition of R. terraenovae into standardized upper and lower parasymphyseal/symphyseal, anterior lateral, and posterior tooth groups. As with all carcharhinid sharks, the dentition of R. terraenovae exhibits monognathic and dignathic heterodonty. We also observed significant ontogenetic heterodonty in the species, as the teeth and dentition progress through five generalized developmental stages as the shark matures. The ontogenetic development of serrations on the teeth appears to be closely related to documented dietary changes as the shark matures. Initial diets are comprised of high percentages of invertebrate prey like shrimp, crabs, and squid, but this transitions through ontogeny to a diet that is more reliant on fishes. We also provide the first documentation of gynandric heterodonty in mature male R. terraenovae, with development of these seasonal teeth likely enabling a male to grasp female sharks during copulation. Our analysis revealed a tremendous amount of variation in the dentition of R. terraenovae, which has direct implications on the taxonomy of fossil Rhizoprionodon. A comparison of the jaws in our sample to those of the extant species of Rhizoprionodon and the morphologically similar Loxodon, Scoliodon, and Sphyrna allowed us to formulate a list of generic-level characteristics to assist with the identification of isolated teeth. When applied to the fossil record, it is shown that some species previously assigned to Rhizoprionodon likely belong to one of the other aforementioned genera. The earliest occurrence of unequivocal Rhizoprionodon teeth in the fossil record are those of the Eocene †R. ganntourensis (Arambourg, 1952), the oldest records of which occur in early Ypresian deposits in Alabama and Mississippi, USA. The early Eocene occurrence of unequivocal fossil Rhizoprionodon teeth in Alabama predates the first occurrence of Negaprion, Galeocerdo, and Carcharhinus teeth in the state, supporting published molecular and morphological phylogenies positing a basal position for Rhizoprionodon within the Carcharhinidae.

Ontogenetic changes in the tooth morphology of bull sharks (Carcharhinus leucas)

Teeth are an integral component of feeding ecology, with a clear link between tooth morphology and diet, as without suitable dentition prey cannot be captured nor broken down for consumption. Bull sharks, Carcharhinus leucas, undergo an ontogenetic niche shift from freshwater to marine habitats, which raises the question: does tooth morphology change with ontogeny? Tooth shape, surface area and thickness were measured using both morphometrics and elliptic Fourier analysis to determine if morphology varied with position in the jaw and if there was an ontogenetic change concordant with this niche shift. Significant ontogenetic differences in tooth morphology as a function of position in the jaw and shark total length were found, with upper and lower jaws of bull sharks presenting two different tooth morphologies. Tooth shape and thickness fell into two groupings, anterior and posterior, in both the upper and lower jaws. Tooth surface area, however, indicated three groupings, mesial, intermediate and distal, in both the upper and lower jaws. While tooth morphology changed significantly with size, showing an inflection at sharks of 135 cm total length, each morphological aspect retained the same tooth groupings throughout. These ontogenetic differences in tooth morphologies reflect tooth strength, prey handling and heterodonty.

Hide and seek shark teeth in Random Forests: machine learning applied to Scyliorhinus canicula populations

Shark populations that are distributed alongside a latitudinal gradient often display body size differences at sexual maturity and vicariance patterns related to their number of tooth files. Previous works have demonstrated that Scyliorhinus canicula populations differ between the northeastern Atlantic Ocean and the Mediterranean Sea based on biological features and genetic analysis. In this study, we sample more than 3,000 teeth from 56 S. canicula specimens caught incidentally off Roscoff and Banyuls-sur-Mer. We investigate population differences based on tooth shape and form by using two approaches. Classification results show that the classical geometric morphometric framework is outperformed by an original Random Forests-based framework. Visually, both S. canicula populations share similar ontogenetic trends and timing of gynandric heterodonty emergence but the Atlantic population has bigger, blunter teeth, and less numerous accessory cusps than the Mediterranean population. According to the models, the populations are best differentiated based on their lateral tooth edges, which bear accessory cusps, and the tooth centroid sizes significantly improve classification performances. The differences observed are discussed in light of dietary and behavioural habits of the populations considered. The method proposed in this study could be further adapted to complement DNA analyses to identify shark species or populations based on tooth morphologies. This process would be of particular interest for fisheries management and identification of shark fossils.

Heterodonty and ontogenetic shift dynamics in the dentition of the tiger shark Galeocerdo cuvier (Chondrichthyes, Galeocerdidae)

The lifelong tooth replacement in elasmobranch fishes (sharks, rays and skates) has led to the assemblage of a great number of teeth from fossil and extant species, rendering tooth morphology an important character for taxonomic descriptions, analysing phylogenetic interrelationships and deciphering their evolutionary history (e.g. origination, divergence, extinction). Heterodonty (exhibition of different tooth morphologies) occurs in most elasmobranch species and has proven to be one of the main challenges for these analyses. Although numerous shark species are discovered and described every year, detailed descriptions of tooth morphologies and heterodonty patterns are lacking or are only insufficiently known for most species. Here, we use landmark‐based 2D geometric morphometrics on teeth of the tiger shark Galeocerdo cuvier to analyse and describe dental heterodonties among four different ontogenetic stages ranging from embryo to adult. Our results reveal rather gradual and subtle ontogenetic shape changes, mostly characterized by increasing size and complexity of the teeth. We furthermore provide the first comprehensive description of embryonic dental morphologies in tiger sharks. Also, tooth shapes of tiger sharks in different ontogenetic stages are re‐assessed and depicted in detail. Finally, multiple cases of tooth file reversal are described. This study, therefore, contributes to our knowledge of dental traits across ontogeny in the extant tiger shark G. cuvier and provides a baseline for further morphological and genetic studies on the dental variation in sharks. Therefore, it has the potential to assist elucidating the underlying developmental and evolutionary processes behind the vast dental diversity observed in elasmobranch fishes today and in deep time.

Using 2D geometric morphometrics, we examined the tooth morphology and heterodonty patterns across ontogeny in extant tiger sharks. Examining tiger sharks in different ontogenetic stages allowed us to provide detailed descriptions of intraspecific tooth variations and to confirm a weak ontogenetic heterodonty in this species.

A new cuspidate ptychodontid shark (Chondrichthyes; Elasmobranchii), from the Upper Cretaceous of Morocco with comments on tooth functionalities and replacement patterns

The first articulated dentition of †Ptychodus from Africa is described herein. The specimen, likely coming from the Turonian of the Asfla area (Goulmima region, southeastern Morocco), exhibits a well-preserved lower dental plate of a second-level predator. A new species, †P. maghrebianus sp. nov., is erected herein based on this durophagous dentition characterised by imbricated cuspidate teeth. We employed for the first time in †Ptychodus multiple quantitative analyses and statistical parametric and non-parametric tests to process biometrical data taken from articulated, associated and isolated teeth. The quantitative approach (morphospace analysis) is exploited herein to support the traditional taxonomic identification (qualitative examination) of †P. maghrebianus sp. nov. and to separate it from the similar cuspidate species, †P. mortoni. Morphospace reconstructions confirm a marked lower dental heterodonty (mesio-distal patterns) for both species. The analysis protocol employed here also allows assigning indeterminate teeth as belonging to †P. mortoni. The reconstruction of the entire lower dental plate of †P. maghrebianus sp. nov. shows a cuspidate dentition probably able to reduce tooth damages when crushing thin-shelled prey. Both dental morphologies and tooth wear patterns suggest a peculiar food processing and a diet mainly consisting of bivalves, decapods and small fish for this durophagous predator. Trophic reconstructions of the Turonian ichthyofauna inhabiting the middle to outer ramp environment of the Asfla area emphasize that †P. maghrebianus sp. nov. and the batoid †Tingitanius most likely represented second-level consumers, whereas the sclerorhynchiforms †Asflapristis and †Ptychotrygon represented third-level predators. Top positions within the food web were occupied by larger predaceous elasmobranchs (e.g., †Squalicorax).

Feeding ecology has shaped the evolution of modern sharks

Sharks are iconic predators in today's oceans, yet their modern diversity has ancient origins. In particular, present hypotheses suggest that a combination of mass extinction, global climate change, and competition has regulated the community structure of dominant mackerel (Lamniformes) and ground (Carcharhiniformes) sharks over the last 66 million years. However, while these scenarios advocate an interplay of major abiotic and biotic events, the precise drivers remain obscure. Here, we focus on the role of feeding ecology using a geometric morphometric analysis of 3,837 fossil and extant shark teeth. Our results reveal that morphological segregation rather than competition has characterized lamniform and carcharhiniform evolution. Moreover, although lamniforms suffered a long-term disparity decline potentially linked to dietary "specialization," their recent disparity rivals that of "generalist" carcharhiniforms. We further confirm that low eustatic sea levels impacted lamniform disparity across the end-Cretaceous mass extinction. Adaptations to changing prey availability and the proliferation of coral reef habitats during the Paleogene also likely facilitated carcharhiniform dispersals and cladogenesis, underpinning their current taxonomic dominance. Ultimately, we posit that trophic partitioning and resource utilization shaped past shark ecology and represent critical determinants for their future species survivorship.

Tooth morphology elucidates shark evolution across the end-Cretaceous mass extinction

Sharks (Selachimorpha) are iconic marine predators that have survived multiple mass extinctions over geologic time. Their prolific fossil record is represented mainly by isolated shed teeth, which provide the basis for reconstructing deep time diversity changes affecting different selachimorph clades. By contrast, corresponding shifts in shark ecology, as measured through morphological disparity, have received comparatively limited analytical attention. Here, we use a geometric morphometric approach to comprehensively examine tooth morphologies in multiple shark lineages traversing the catastrophic end-Cretaceous mass extinction-this event terminated the Mesozoic Era 66 million years ago. Our results show that selachimorphs maintained virtually static levels of dental disparity in most of their constituent clades across the Cretaceous-Paleogene interval. Nevertheless, selective extinctions did impact apex predator species characterized by triangular blade-like teeth. This is particularly evident among lamniforms, which included the dominant Cretaceous anacoracids. Conversely, other groups, such as carcharhiniforms and orectolobiforms, experienced disparity modifications, while heterodontiforms, hexanchiforms, squaliforms, squatiniforms, and †synechodontiforms were not overtly affected. Finally, while some lamniform lineages disappeared, others underwent postextinction disparity increases, especially odontaspidids, which are typified by narrow-cusped teeth adapted for feeding on fishes. Notably, this increase coincides with the early Paleogene radiation of teleosts as a possible prey source, and the geographic relocation of disparity sampling "hotspots," perhaps indicating a regionally disjunct extinction recovery. Ultimately, our study reveals a complex morphological response to the end-Cretaceous mass extinction and highlights an event that influenced the evolution of modern sharks.

Landmark-free, parametric hypothesis tests regarding two-dimensional contour shapes using coherent point drift registration and statistical parametric mapping

This paper proposes a computational framework for automated, landmark-free hypothesis testing of 2D contour shapes (i.e., shape outlines), and implements one realization of that framework. The proposed framework consists of point set registration, point correspondence determination, and parametric full-shape hypothesis testing. The results are calculated quickly (<2 s), yield morphologically rich detail in an easy-to-understand visualization, and are complimented by parametrically (or nonparametrically) calculated probability values. These probability values represent the likelihood that, in the absence of a true shape effect, smooth, random Gaussian shape changes would yield an effect as large as the observed one. This proposed framework nevertheless possesses a number of limitations, including sensitivity to algorithm parameters. As a number of algorithms and algorithm parameters could be substituted at each stage in the proposed data processing chain, sensitivity analysis would be necessary for robust statistical conclusions. In this paper, the proposed technique is applied to nine public datasets using a two-sample design, and an ANCOVA design is then applied to a synthetic dataset to demonstrate how the proposed method generalizes to the family of classical hypothesis tests. Extension to the analysis of 3D shapes is discussed.

Linking Tooth Shape to Strike Mechanics in the Boa constrictor

Snakes, with the obvious exception of the fangs, are considered to lack the regional specialization of tooth shape and function which are exemplified by mammals. Recent work in fishes has suggested that the definition of homodont and heterodont are incomplete without a full understanding of the morphology, mechanics, and behavior of feeding. We investigated this idea further by examining changes in tooth shape along the jaw of Boa constrictor and integrating these data with the strike kinematics of boas feeding on rodent prey. We analyzed the shape of every tooth in the skull, from a combination of anesthetized individuals and CT scanned museum specimens. For strike kinematics, we filmed eight adult boas striking at previously killed rats. We determined the regions of the jaws that made first contact with the prey, and extrapolated the relative positions of those teeth at that moment. We further determined the roles of all the teeth throughout the prey capture process, from the initiation of the strike until constriction began. We found that the teeth in the anterior third of the mandible are the most upright, and that teeth become progressively more curved posteriorly. Teeth on the maxilla are more curved than on the mandible, and the anterior teeth are more linear or recurved than the posterior teeth. In a majority of strikes, boas primarily made contact with the anterior third of the mandible first. The momentum from the strike caused the upper jaws and skull to rotate over the rat. The more curved teeth of the upper jaw slid over the rat unimpeded until the snake began to close its jaws. In the remaining strikes, boas made contact with the posterior third of both jaws simultaneously, driving through the prey and quickly retracting, ensnaring the prey on the curved posterior teeth of both jaws. The curved teeth of the palatine and pterygoid bones assist in the process of swallowing.

The intraspecific diversity of tooth morphology in the large-spotted catshark Scyliorhinus stellaris: insights into the ontogenetic cues driving sexual dimorphism

Teeth in sharks are shed and replaced throughout their lifetime. Morphological dental changes through ontogeny have been identified in several species and have been correlated with shifts in diet and the acquisition of sexual maturity. However, these changes were rarely quantified in detail along multiple ontogenetic stages, which makes it difficult to infer the developmental processes responsible for the observed plasticity. In this work, we use micro-computed tomography and 3D geometric morphometrics to describe and analyze the tooth size and shape diversity across three ontogenetic stages (hatchling, juvenile, and sexually mature) in the large-spotted catshark Scyliorhinus stellaris (Linnaeus, 1758). We first describe the intra-individual variation of tooth form for each sex at each ontogenetic stage. We provide a tooth morphospace for palatoquadrate and Meckelian teeth and identify dental features, such as relative size and number of cusps, involved in the range of variation of the observed morphologies. We then use these shape data to draw developmental trajectories between ontogenetic stages and for each tooth position within the jaw to characterize ontogenetic patterns of sexual dimorphism. We highlight the emergence of gynandric heterodonty between the juvenile and mature ontogenetic stages, with mature females having tooth morphologies more similar to juveniles' than mature males that display regression in the number of accessory cusps. From these data, we speculate on the developmental processes that could account for such developmental plasticity in S. stellaris.

Intraspecific dental variations in the deep-sea shark Etmopterus spinax and their significance in the fossil record

An important character on several taxonomic levels for shark identification is the tooth morphology. Sharks show a variety of highly specialized dentitions reflecting adaptations to their feeding habits. Intraspecific variation of tooth morphology such as sexual or ontogenetic dimorphism is poorly known in many species, even though tooth morphology plays a decisive role in the characterization of the fossil record of sharks, which comprises mostly fossil teeth. Here we analyzed the dentition of 40 jaws of the Velvet Belly Lantern Shark Etmopterus spinax and identified ontogenetic and sexual dimorphic characters such as total number of teeth, number of upper teeth, cusplet numbers in upper jaw teeth and width of lower jaw teeth. Dimorphic characters may reduce intraspecific competition for food, as E. spinax segregates by sex and size and may allow for identifying the male sex. The lower jaw tooth height, a sexually non-dimorphic character, was used to re-calculate the total length of specimens, which represents the first such approach for a squaliform shark. Results derived from the extant E. spinax are subsequently applied to fossil Etmopterus sp. teeth (Miocene) to gain individual information such as sex or size, but also characterize the extinct population from the excavation site by a size distribution profile in comparison to data from extant populations. This approach indicates the presence of multiple ontogenetic stages in the extinct population.

The Evolutionary Continuum of Functional Homodonty to Heterodonty in the Dentition of Halichoeres Wrasses

Vertebrate dentitions are often collapsed into a few discrete categories, obscuring both potentially important functional differences between them and insight into their evolution. The terms homodonty and heterodonty typically conflate tooth morphology with tooth function, and require context-dependent subcategories to take on any specific meaning. Qualifiers like incipient, transient, or phylogenetic homodonty attempt to provide a more rigorous definition but instead highlight the difficulties in categorizing dentitions. To address these issues, we recently proposed a method for quantifying the function of dental batteries based on the estimated stress of each tooth (inferred using surface area) standardized for jaw out-lever (inferred using tooth position). This method reveals a homodonty-heterodonty functional continuum where small and large teeth work together to transmit forces to a prey item. Morphological homodonty or heterodonty refers to morphology, whereas functional homodonty or heterodonty refers to transmission of stress. In this study, we use Halichoeres wrasses to explore how functional continuum can be used in phylogenetic analyses by generating two continuous metrics from the functional homodonty-heterodonty continuum. Here we show that functionally heterodont teeth have evolved at least three times in Halichoeres wrasses. There are more functionally heterodont teeth on upper jaws than on lower jaws, but functionally heterodont teeth on the lower jaws bear significantly more stress. These nuances, which have functional consequences, would be missed by binning entire dentitions into discrete categories. This analysis points out areas worth taking a closer look at from a mechanical and developmental point of view with respect to the distribution and type of heterodonty seen in different jaws and different areas of jaws. These data, on a small group of wrasses, suggest continuous dental variables can be a rich source of insight into the evolution of fish feeding mechanisms across a wider variety of species.

Not your father's homodonty-stress, tooth shape, and the functional homodont

Teeth tell the tale of interactions between predator and prey. If a dental battery is made up of teeth that look similar, they are morphologically homodont, but if there is an unspecified amount of regional specialization in size or shape, they are morphologically heterodont. These are vague terms with no useful functional implication because morphological homodonty does not necessarily equal functional homodonty. Teeth that look the same may not function the same. Conical teeth are prevalent in fishes, superficially tasked with the simple job of puncture. There is a great deal of variation in the shape and placement of conical teeth. Anterior teeth may be larger than posterior ones, larger teeth may be surrounded by small ones, and patches of teeth may all have the same size and shape. Such variations suggest that conical dentitions might represent a single morphological solution for different functional problems. We are interested in the concept of homodonty and using the conical tooth as a model to differentiate between tooth shape and performance. We consider the stress that a tooth can exert on prey as stress is what causes damage. To create a statistical measure of functional homodonty, stress was calculated from measurements of surface area, position, and applied force. Functional homodonty is then defined as the degree to which teeth along the jaw all bear/exert similar stresses despite changes in shape. We find that morphologically heterodont teeth are often functionally homodont and that position is a better predictor of performance than shape. Furthermore, the arrangement of teeth affects their function, such that there is a functional advantage to having several smaller teeth surrounding a singular large tooth. We demonstrate that this arrangement of teeth is useful to grab, rather than tear, prey upon puncture, with the smaller teeth dissipating large stress forces around the larger tooth. We show that measurements of how shape affects stress distribution in response to loading give us a clearer picture of the evolution of conically shaped teeth.