Flow independent black blood imaging with a large FOV from the neck to the aortic arch: A feasibility study at 3 tesla

PURPOSE

To investigate the feasibility of obtaining black-blood imaging with a large FOV from the neck to the aortic arch at 3 T using a newly modified Relaxation-Enhanced Angiography without Contrast and Triggering for Black-Blood Imaging (REACT-BB).

MATERIALS AND METHODS

REACT-BB provides black-blood images by adjusting the inversion time (TI) in REACT to the null point of blood. The optimal TI for REACT-BB was investigated in 10 healthy volunteers with TI varied from 200 ms to 1400 ms. Contrast ratios were calculated between muscle and three branch arteries of the aortic arch. Additionally, a comparison between REACT-BB and MPRAGE involved evaluating the depiction of high-intensity plaques in 222 patients with stroke or transient ischemic attack. Measurements included plaque-to-muscle signal intensity ratios (PMR), plaque volumes, and carotid artery stenosis rates in 60 patients with high-intensity plaques in carotid arteries.

RESULTS

REACT-BB with TI = 850 ms produced the black-blood image with the best contrast between blood and background tissues. REACT-BB outperformed MPRAGE in depicting high-intensity plaques in the aortic arch (55.4% vs 45.5%) and exhibited superior overall image quality in visual assessment (3.31 ± 0.70 vs 2.89 ± 0.73; p < 0.05). Although the PMR of REACT-BB was significantly lower than MPRAGE (2.227 ± 0.601 vs 2.285 ± 0.662; P < 0.05), a strong positive correlation existed between REACT-BB and MPRAGE (ρ = 0.935; P < 0.05), and all high-intensity plaques that MPRAGE detected were clearly detected by REACT-BB.

CONCLUSION

REACT-BB provides black-blood images with uniformly suppressed fat and blood signals over a large FOV from the neck to the aortic arch with comparable or better high-signal plaque depiction than MPRAGE.

Three-dimensional multicontrast blood imaging with a single acquisition: Simultaneous non-contrast-enhanced MRA and vessel wall imaging in the thoracic aorta

PURPOSE

To evaluate MRA and vessel wall imaging (VWI) image quality in the thoracic aorta using a novel method named BRIDGE (bright and dark blood images with multishot gradient-echo EPI).

METHODS

The BRIDGE method consists of 3D multishot gradient-echo EPI acquisition using pulse gating, navigator gating, and magnetization preparation with a T₂ -preparation pulse and a nonselective inversion-recovery pulse. The BRIDGE and conventional methods (noncontrast MRA based on 3D turbo-field-echo [TFE] and VWI based on 3D turbo spin echo with variable refocusing flip angle [VRFA-TSE]) were performed in 10 healthy volunteers and 10 patients. The SNR, contrast-to-noise ratio (CNR), and sharpness in the thoracic aorta were compared for MRA evaluation. The values of SNR_lumen , SNR_wall , CNR_wall-lumen , contrast ratio (CR)_lumen-muscle , coefficient of variation, sharpness, lumen area, and wall area in the thoracic aorta were compared for VWI evaluation. Two radiologists independently performed qualitative image-analysis assessments.

RESULTS

When MRA and VWI were acquired, the acquisition time was 26.6% to 27.8% shorter with BRIDGE than the conventional method. In the MRA evaluation, BRIDGE and TFE methods were comparable. In the VWI evaluation, BRIDGE was superior to the VRFA-TSE method in blood suppression and evaluation of the ascending aorta. Because the blood signal suppression of BRIDGE is based on the T₁ value of blood, the blood signal can be suppressed more uniformly than with the VRFA-TSE method, regardless of age, blood flow velocity, or vascular anatomy.

CONCLUSION

The BRIDGE method can provide both MRA, to assess vascular anatomy and luminal changes, and VWI, to assess the vessel wall and detect vulnerable plaques, in a single scan.

Free-Breathing Three-Dimensional Isotropic-Resolution MR sequence for simultaneous vessel wall imaging of bilateral renal arteries and abdominal aorta: Feasibility and reproducibility

PURPOSE

Many diseases can simultaneously involve renal arteries and the adjacent abdominal aorta. The study proposed a free-breathing three-dimensional (3D) isotropic-resolution MR sequence for simultaneous vessel wall imaging of bilateral renal arteries and adjacent abdominal aorta.

METHODS

A respiratory triggered isotropic-resolution sequence which combined the improved motion-sensitized driven-equilibrium (iMSDE) preparation with the spoiled gradient recalled (SPGR) readout (iMSDE-SPGR) was proposed for simultaneous vessel wall imaging of renal arteries and abdominal aorta. The proposed iMSDE-SPGR sequence was optimized by positioning spatial saturation pulses (i.e. REST slabs) elaborately to further alleviate respiratory and gastrointestinal motion artifacts and selecting appropriate first-order gradient moment (m₁ ) of the iMSDE preparation. Thirteen healthy subjects and thirteen patients with renal artery stenosis (RAS) underwent simultaneous vessel wall imaging with the optimized iMSDE-SPGR sequence at 3.0T. Signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR) and morphology of renal arterial wall and aortic wall were measured. Reproducibility of intra-observer, inter-observer and scan-rescan (n = 13 healthy subjects) in measuring SNR, CNR and morphology was evaluated. For the reproducibility test, the agreement was determined using intraclass correlation coefficients (ICC) and the differences were compared using paired-t test or non-parametric Wilcoxon test when appropriate. Bland-Altman plots were used to calculate the bias between observers and between scans.

RESULTS

The proposed iMSDE-SPGR sequence was feasible for simultaneous vessel wall imaging both in the healthy subjects and the patients. The sequence showed good to excellent inter-observer (ICC:0.615-0.999), excellent intra-observer (ICC:0.801-0.998) and scan-rescan (ICC:0.768-0.998) reproducibility in measuring morphology, SNR and CNR. There were no significant differences in SNR, CNR and morphology measurements between observers and between scans (all P>0.05). Bland-Altman plots showed small bias in assessing SNR, CNR and morphology.

DATA CONCLUSION

The proposed free-breathing 3D isotropic-resolution iMSDE-SPGR technique is feasible and reproducible for simultaneous vessel wall imaging of bilateral renal arteries and adjacent abdominal aorta. This article is protected by copyright. All rights reserved.

Evaluating renal arterial wall by non-enhanced 2D and 3D free-breathing black-blood techniques: Initial experience

OBJECTIVES

To evaluate the feasibility and reproducibility of 2D and 3D black-blood sequences in measuring morphology of renal arterial wall.

METHODS

The 2D and 3D imaging sequences used variable-refocusing-flip-angle and constant-low-refocusing-flip-angle turbo spin echo (TSE) readout respectively, with delicately selected black-blood scheme and respiratory motion trigger for free-breathing imaging. Fourteen healthy subjects and three patients with Takayasu arteritis underwent renal artery wall imaging with 3D double inversion recovery (DIR) TSE and 2D Variable Flip Angle-TSE (VFA-TSE) black-blood sequences at 3.0 T. Four healthy subjects were randomly selected for scan-rescan reproducibility experiments. Signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR) and morphology of arterial wall were measured and compared using paired-t-test or Wilcoxon signed-rank test between 2D and 3D sequences. The inter-observer, intra-observer and scan-rescan agreements of above measurements were determined using intraclass correlation coefficient (ICC).

RESULTS

The 2D and 3D imaging sequences showed similar morphological measurements (lumen area, wall area, mean wall thickness and maximum wall thickness) of renal arterial wall (all P > 0.05) and excellent agreement (ICC: 0.853-0.954). Compared to 2D imaging, 3D imaging exhibited significantly lower SNR_lumen (P < 0.01) and SNR_wall (P = 0.037), similar contrast-to-noise ratio (CNR) (P = 0.285), and higher CNR efficiency (CNR_eff) (P < 0.01). Both 2D and 3D imaging showed good to excellent inter-observer (ICC: 0.723-0.997), intra-observer (ICC: 0.749-0.996) and scan-rescan (ICC: 0.710-0.992) reproducibility in measuring renal arterial wall morphology, SNR and CNR, respectively.

CONCLUSIONS

Both high-resolution free-breathing 2D VFA-TSE and 3D DIR TSE black-blood sequences are feasible and reproducible in high-resolution renal arterial wall imaging. The 2D imaging has high SNR, whereas 3D imaging has high imaging efficiency.

Carotid wall imaging with 3D_T2_FFE: sequence parameter optimization and comparison with 3D_T2_SPACE

Similar to sampling perfection with application-optimized contrast using different flip angle evolutions (SPACE), T2-weighted fast field echo (FFE) also has a black blood effect and a high imaging efficiency. The purpose of this study was to optimize 3D_T2_FFE and compare it with 3D_T2_SPACE for carotid imaging. The scanning parameter of 3D_T2_FFE was optimized for the imaging of the carotid wall. Twenty healthy volunteers and 10 patients with carotid plaque underwent cervical 3D_T2_FFE and 3D_T2_SPACE examinations. The signal-to-noise ratios of the carotid wall (SNR_wall) and lumen (SNR_lumen), and the contrast-to-noise ratios between the wall and lumen (CNR_{wall_lumen}) were compared. The incidence of the residual flow signal at the carotid bifurcation and the grades of flow voids in the cerebellopontine angle region in the two sequences were also compared. The reproducibility of the two sequences was tested. No significant difference was observed between the two sequences in terms of the SNR_wall of healthy individuals and patients (P = 0.132 and 0.102, respectively). The SNR_lumen in the 3D_T2_FFE images was lower than that in the 3D_T2_SPACE images. No significant difference was observed between the two sequences in terms of the CNR_wall-lumen. The incidence of the residual flow signal at the carotid bifurcation in 3D_T2_FFE was significantly lower than that in 3D_T2_SPACE. The grades of flow suppression in the cerebellopontine angle region in 3D_T2_SPACE was lower than that in 3D_T2_FFE. Both sequences showed excellent inter-and intra-observer reproducibility. Compared to 3D_T2_SPACE, 3D_T2_FFE showed stronger flow suppression while maintaining good imaging quality, which can be used as an alternative tool for carotid imaging.

One-Stop MR Neurovascular Vessel Wall Imaging With a 48-Channel Coil System at 3 T

OBJECTIVE

The purpose of this article was to build a radio frequency (RF) coil system to achieve high vessel wall image quality with coverage extending from the aortic arch to the intracranial vessels.

METHODS

A 48-channel coil system was built and characterized at a 3 tesla (T) Magnetic Resonance Imaging (MRI) scanner (uMR 790, Shanghai United Imaging Healthcare, Shanghai, China). The coil's performance was compared with a commercially available 36-channel coil system. By human studies, signal-to-noise ratio (SNR) units were evaluated and g-factors were calculated in the transverse planes of the brain and neck regions.

RESULTS

The SNR was increased by at least 28% in the brain region and up to fourfold in the neck region. The average g-factor with the acceleration factor, R = 3, was lowered by 21% in the transverse plane of the neck region. Intracranial and carotid arterial wall images with an isotropic spatial resolution of 0.63 mm were acquired within 7.7 minutes and thoracic aorta wall images with an isotropic spatial resolution of 1.1 mm were acquired within 2.7 minutes with the 48-channel coil system. The vessel wall can be more clearly visualized with the 48-channel coil system compared with the 36-channel coil system.

CONCLUSION

A 48-channel coil system was developed and demonstrated superior performance for vessel wall imaging at the intracranial and cervical carotid arteries compared with a commercial 36-channel coil.

SIGNIFICANCE

The 48-channel coil system is potentially useful for clinical diagnostics, especially when attempting to diagnose ischemic stroke.

Combined intravenous and intra-articular tranexamic acid administration in total knee arthroplasty for preventing blood loss and hyperfibrinolysis: A randomized controlled trial

BACKGROUND

Total knee arthroplasty (TKA) is a surgical procedure to replace the weight-bearing surfaces of the knee joint to relieve pain and disability. However, blood loss and fibrinolytic activity, accounting for a poor prognosis following TKA operation, were relieved by fibrinolytic inhibitor tranexamic acid (TXA). For a better application of TXA function, we explored the effect of intravenous injection (IV) of TXA combined with intra-articular injection (IA) of TXA in patients after TKA.

METHODS

Patients admitted from Weifang People's Hospital from January 2015 to December 2016 who received TKA were injected with 20 mg/kg TXA by IV before TKA (n = 50), 3.0 g TXA by IA after TKA (n = 50), or combination of 20 mg/kg TXA by IV before TKA and 3.0 g TXA by IA after TKA (n = 50). Knee function was assessed using HSS, KSS, NASS, and ROM. In addition, the total blood loss (TBL), hidden blood loss (HBL), maximum hemoglobin (Hb) drop, fibrinolytic activity, as well as incidence of thromboembolism were measured. The patients were followed up for 6 months. The deadline for follow-up was June 2017 and the incidence of thromboembolism events within 6 months after operation was counted.

RESULTS

HSS, KSS, NASS scores, and ROM were elevated after patients receiving TKA. Patients received IV plus IA TXA has decreased TBL, HBL, and maximum Hb drop than those received IV TXA-alone and IA TXA-alone, with reductions in FDP and D-dimer, indicating that IV plus IA TXA injection is superior to prevent blood loss and hyperfibrinolysis during TKA. Age, sex, type of femoral prosthesis, and the injection method of TXA were risk factors for HBL of patients after receiving TKA.

CONCLUSIONS

The aforementioned results demonstrate that TKA is an effective surgery, and IV plus IA TXA injection functions more effectively in reducing blood loss and fibrinolytic activity in patients, which is a clinical factor of occult hemorrhage.

Feasibility of 3D black-blood variable refocusing angle fast spin echo cardiovascular magnetic resonance for visualization of the whole heart and great vessels in congenital heart disease

BACKGROUND

Volumetric black-blood cardiovascular magnetic resonance (CMR) has been hampered by long scan times and flow sensitivity. The purpose of this study was to assess the feasibility of black-blood, electrocardiogram (ECG)-triggered and respiratory-navigated 3D fast spin echo (3D FSE) for the visualization of the whole heart and great vessels.

METHODS

The implemented 3D FSE technique used slice-selective excitation and non-selective refocusing pulses with variable flip angles to achieve constant echo signal for tissue with T1 (880 ms) and T2 (40 ms) similar to the vessel wall. Ten healthy subjects and 21 patients with congenital heart disease (CHD) underwent 3D FSE and conventional 3D balanced steady-state free precession (bSSFP). The sequences were compared in terms of ability to perform segmental assessment, local signal-to-noise ratio (SNRl) and local contrast-to-noise ratio (CNRl).

RESULTS

In both healthy subjects and patients with CHD, 3D FSE showed superior pulmonary vein but inferior coronary artery origin visualisation compared to 3D bSFFP. However, in patients with CHD the combination of 3D bSSFP and 3D FSE whole-heart imaging improves the success rate of cardiac morphological diagnosis to 100% compared to either technique in isolation (3D FSE, 23.8% success rate, 3D bSSFP, 5% success rate). In the healthy subjects SNRl for 3D bSSFP was greater than for 3D FSE (30.1 ± 7.3 vs 20.9 ± 5.3; P = 0.002) whereas the CNRl was comparable (17.3 ± 5.6 vs 17.4 ± 4.9; P = 0.91) between the two scans.

CONCLUSIONS

The feasibility of 3D FSE for whole-heart black-blood CMR imaging has been demonstrated. Due to their high success rate for segmental assessment, the combination of 3D bSSFP and 3D FSE may be an attractive alternative to gadolinium contrast enhanced morphological CMR in patients with CHD.

MRI-derived aortic characteristics after pregnancy: The AMBITYON study

OBJECTIVES

Pregnancy and pregnancy complications have been associated with increased arterial stiffness even at young age. In this study we assessed the impact of parity on CMR-derived aortic characteristics as early markers of atherosclerosis and arterial stiffness in healthy women between 25 and 35 years.

STUDY DESIGN

We studied 68 women who participated in the AMBITYON study, a prospective population-based cohort study for assessment of atherosclerotic burden by MRI and traditional CVD risk factors in healthy, young adults. Of these women, 40 (58.8%) were nulliparous, 13 (19.1%) were primiparous and 15 (22.1%) were multiparous.

MAIN OUTCOME MEASURES

Descending thoracic aortic wall thickness (AWT) and pulse wave velocity (PWV) were measured using 3.0T CMR.

RESULTS

AWT measurements were similar between nulliparous women and primi- or multiparous women (1.6 mm ± 0.2 mm vs. 1.6 mm ± 0.2 mm; p = 0.79). Correction for age and systolic blood pressure did not change these results. Applying percentile based cut-off values showed a non-significant increase in AWT in parous women. PWV measurements did not differ between nulliparous women and parous women (4.5 m/s ± 0.7 m/s vs. 4.5 m/s ± 0.8 m/s; p = 0.78). Correction for age and systolic blood pressure did not influence these results. Using percentile based cut-off values, showed an increasing likelihood of higher PWV-values in parous women, although not statistically significant.

CONCLUSIONS

Direct measurement of aortic AWT and PWV by CMR showed no difference between nulliparous and parous women, probably indicating limited effect of pregnancy on arterial stiffness and early markers of atherosclerosis.

TRIAL REGISTRATION

Netherlands Trial Register (NTR) number: 4742.

3D whole-brain vessel wall cardiovascular magnetic resonance imaging: a study on the reliability in the quantification of intracranial vessel dimensions

BACKGROUND

One of the potentially important applications of three-dimensional (3D) intracranial vessel wall (IVW) cardiovascular magnetic resonance (CMR) is to monitor disease progression and regression via quantitative measurement of IVW morphology during medical management or drug development. However, a prerequisite for this application is to validate that IVW morphologic measurements based on the modality are reliable. In this study we performed comprehensive reliability analysis for the recently proposed whole-brain IVW CMR technique.

METHODS

Thirty-four healthy subjects and 10 patients with known intracranial atherosclerotic disease underwent repeat whole-brain IVW CMR scans. In 19 of the 34 subjects, two-dimensional (2D) turbo spin-echo (TSE) scan was performed to serve as a reference for the assessment of vessel dimensions. Lumen and wall volume, normalized wall index, mean and maximum wall thickness were measured in both 3D and 2D IVW CMR images. Scan-rescan, intra-observer, and inter-observer reproducibility of 3D IVW CMR in the quantification of IVW or plaque dimensions were respectively assessed in volunteers and patients as well as for different healthy subjectsub-groups (i.e. < 50 and ≥ 50 years). The agreement in vessel wall and lumen measurements between the 3D technique and the 2D TSE method was also investigated. In addition, the sample size required for future longitudinal clinical studies was calculated.

RESULTS

The intra-class correlation coefficient (ICC) and Bland-Altman plots indicated excellent reproducibility and inter-method agreement for all morphologic measurements (All ICCs > 0.75). In addition, all ICCs of patients were equal to or higher than that of healthy subjects except maximum wall thickness. In volunteers, all ICCs of the age group of ≥50 years were equal to or higher than that of the age group of < 50 years. Normalized wall index and mean and maximum wall thickness were significantly larger in the age group of ≥50 years. To detect 5% - 20% difference between placebo and treatment groups, normalized wall index requires the smallest sample size while lumen volume requires the highest sample size.

CONCLUSIONS

Whole-brain 3D IVW CMR is a reliable imaging method for the quantification of intracranial vessel dimensions and could potentially be useful for monitoring plaque progression and regression.

Vessel wall characterization using quantitative MRI: what's in a number?

The past decade has witnessed the rapid development of new MRI technology for vessel wall imaging. Today, with advances in MRI hardware and pulse sequences, quantitative MRI of the vessel wall represents a real alternative to conventional qualitative imaging, which is hindered by significant intra- and inter-observer variability. Quantitative MRI can measure several important morphological and functional characteristics of the vessel wall. This review provides a detailed introduction to novel quantitative MRI methods for measuring vessel wall dimensions, plaque composition and permeability, endothelial shear stress and wall stiffness. Together, these methods show the versatility of non-invasive quantitative MRI for probing vascular disease at several stages. These quantitative MRI biomarkers can play an important role in the context of both treatment response monitoring and risk prediction. Given the rapid developments in scan acceleration techniques and novel image reconstruction, we foresee the possibility of integrating the acquisition of multiple quantitative vessel wall parameters within a single scan session.

Reference Values for Cardiac and Aortic Magnetic Resonance Imaging in Healthy, Young Caucasian Adults

Background

Reference values for morphological and functional parameters of the cardiovascular system in early life are relevant since they may help to identify young adults who fall outside the physiological range of arterial and cardiac ageing. This study provides age and sex specific reference values for aortic wall characteristics, cardiac function parameters and aortic pulse wave velocity (PWV) in a population-based sample of healthy, young adults using magnetic resonance (MR) imaging.

Materials and Methods

In 131 randomly selected healthy, young adults aged between 25 and 35 years (mean age 31.8 years, 63 men) of the general-population based Atherosclerosis-Monitoring-and-Biomarker-measurements-In-The-YOuNg (AMBITYON) study, descending thoracic aortic dimensions and wall thickness, thoracic aortic PWV and cardiac function parameters were measured using a 3.0T MR-system. Age and sex specific reference values were generated using dedicated software. Differences in reference values between two age groups (25–30 and 30–35 years) and both sexes were tested.

Results

Aortic diameters and areas were higher in the older age group (all p<0.007). Moreover, aortic dimensions, left ventricular mass, left and right ventricular volumes and cardiac output were lower in women than in men (all p<0.001). For mean and maximum aortic wall thickness, left and right ejection fraction and aortic PWV we did not observe a significant age or sex effect.

Conclusion

This study provides age and sex specific reference values for cardiovascular MR parameters in healthy, young Caucasian adults. These may aid in MR guided pre-clinical identification of young adults who fall outside the physiological range of arterial and cardiac ageing.

3D black blood VISTA vessel wall cardiovascular magnetic resonance of the thoracic aorta wall in young, healthy adults: reproducibility and implications for efficacy trial sample sizes: a cross-sectional study

BACKGROUND

Pre-clinical detection of atherosclerosis enables personalized preventive strategies in asymptomatic individuals. Cardiovascular magnetic resonance (CMR) has evolved as an attractive imaging modality for studying atherosclerosis in vivo. Yet, the majority of aortic CMR studies and proposed sequences to date have been performed at 1.5 tesla using 2D BB techniques and a slice thickness of 4-5 mm. Here, we evaluate for the first time the reproducibility of an isotropic, T1-weighted, three-dimensional, black-blood, CMR VISTA sequence (3D-T1-BB-VISTA) for quantification of aortic wall characteristics in healthy, young adults.

METHODS

In 20 healthy, young adults (10 males, mean age 31.3 years) of the AMBITYON cohort study the descending thoracic aorta was imaged with a 3.0 T MR system using the 3D-T1-BB-VISTA sequence. The inter-scan, inter-rater and intra-rater reproducibility of aortic lumen, total vessel and wall area and mean and maximum wall thickness was evaluated using Bland-Altman analyses and Intraclass Correlation Coefficients (ICC). Based on these findings, sample sizes for detecting differences in aortic wall characteristics between groups were calculated.

RESULTS

For each studied parameter, the inter-scan, inter-rater and intra-rater reproducibility was excellent as indicated by narrow limits of agreement and high ICCs (ranging from 0.76 to 0.99). Sample sizes required to detect a 5% difference in aortic wall characteristics between two groups were 203, 126, 136, 68 and 153 per group for lumen area, total vessel area and vessel wall area and for mean and maximum vessel wall thickness, respectively.

CONCLUSION

The 3D-T1-BB-VISTA sequence provides excellent reproducibility for quantification of aortic wall characteristics and can detect small differences between groups with reasonable sample sizes. Hence, it may be a valuable tool for assessment of the subtle vascular wall changes of early atherosclerosis in asymptomatic populations.

Isotropic 3D black blood MRI of abdominal aortic aneurysm wall and intraluminal thrombus

INTRODUCTION

The aortic wall and intraluminal thrombus (ILT) have been increasingly studied as potential markers of progressive disease with abdominal aortic aneurysms (AAAs). Our goal was to develop a high resolution, 3D black blood MR technique for AAA wall and ILT imaging within a clinically acceptable scan time.

METHODS

Twenty two patients with AAAs (maximal diameter 4.3±1.0cm), along with five healthy volunteers, were imaged at 3T with a 3D T1-weighted fast-spin-echo sequence using variable flip angle trains (SPACE) with a preparation pulse (DANTE) for suppressing blood signal. Volunteers and ten patients were also scanned with SPACE alone for comparison purposes. The signal to noise ratio (SNR) and the aortic wall/ILT to lumen contrast to noise ratio (CNR) were measured. Qualitative image scores (1-4 scale) assessing the inner lumen and outer wall boundaries of AAA were performed by two blinded reviewers. In patients with ILT, the ratio of ILT signal intensity (ILTSI) over psoas muscle SI (MuscleSI) was calculated, and the signal heterogeneity of ILT was quantified as standard deviation (SD) over the mean.

RESULTS

All subjects were imaged successfully with an average scan time of 7.8±0.7minutes. The DANTE preparation pulse for blood suppression substantially reduced flow artifacts in SPACE with lower lumen SNR (8.8 vs. 21.4, p<0.001) and improved the wall/ILT to lumen CNR (9.9 vs. 6.3, p<0.001) in patients. Qualitative assessment showed improved visualization of lumen boundaries (73% higher scores on average, p=0.01) and comparable visualization of outer wall boundary (p>0.05). ILT was present in ten patients, with relatively high signal and a wide SD (average ILTSI/MuscleSI 1.42±0.48 (range 0.75-2.11)) and with SD/mean of 27.7%±6.6% (range 19.6%-39.4%).

CONCLUSION

High resolution, 3D black blood MRI of AAAs can be achieved in a clinical accepted scan time with reduction of flow artifacts using the DANTE preparation pulse. Signal characteristics of ILT can be quantified and may be used for improved patient-specific risk stratification.