Challenges in implementing clinical liquid chromatography-tandem mass spectrometry methods--the light at the end of the tunnel

Recent developments in mass-spectrometry-based targeted proteomics of clinical cancer biomarkers

Routine measurement of cancer biomarkers is performed for early detection, risk classification, and treatment monitoring, among other applications, and has substantially contributed to better clinical outcomes for patients. However, there remains an unmet need for clinically validated assays of cancer protein biomarkers. Protein tumor markers are of particular interest since proteins carry out the majority of biological processes and thus dynamically reflect changes in cancer pathophysiology. Mass spectrometry-based targeted proteomics is a powerful tool for absolute peptide and protein quantification in biological matrices with numerous advantages that make it attractive for clinical applications in oncology. The use of liquid chromatography-tandem mass spectrometry (LC-MS/MS) based methodologies has allowed laboratories to overcome challenges associated with immunoassays that are more widely used for tumor marker measurements. Yet, clinical implementation of targeted proteomics methodologies has so far been limited to a few cancer markers. This is due to numerous challenges associated with paucity of robust validation studies of new biomarkers and the labor-intensive and operationally complex nature of LC-MS/MS workflows. The purpose of this review is to provide an overview of targeted proteomics applications in cancer, workflows used in targeted proteomics, and requirements for clinical validation and implementation of targeted proteomics assays. We will also discuss advantages and challenges of targeted MS-based proteomics assays for clinical cancer biomarker analysis and highlight some recent developments that will positively contribute to the implementation of this technique into clinical laboratories.

AHP DB: a reference database of proteins in the human aqueous humor

The aqueous humor (AH) is a low-viscosity biofluid that continuously circulates from the posterior chamber to the anterior chamber of the eye. Recent advances in high-resolution mass-spectrometry workflows have facilitated the study of proteomic content in small-volume biofluids like AH, highlighting the potential clinical implications of the AH proteome. Nevertheless, in-depth investigations into the role of AH proteins in ocular diseases have encountered challenges due to limited accessibility to these workflows, difficulties in large-scale AH sample collection and the absence of a reference AH proteomic database. In response to these obstacles, and to promote further research on the involvement of AH proteins in ocular physiology and pathology, we have developed the web-based Aqueous Humor Proteomics Database (AHP DB). The current version of AHP DB contains proteomic data from 307 human AH samples, which were analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The database offers comprehensive information on 1683 proteins identified in the AH samples. Furthermore, relevant clinical data are provided for each analyzed sample. Researchers also have the option to download these datasets individually for offline use, rendering it a valuable resource for the scientific community. Database URL: https://ahp.augusta.edu/.

Mass Spectrometry in Clinical Laboratory: Applications in Therapeutic Drug Monitoring and Toxicology

Mass spectrometry (MS) coupled with liquid chromatography (LC) or gas chromatography (GC) has been proven to be a powerful platform in research and specialized clinical laboratories for decades. In clinical laboratories, it is used for compound identification and quantification. Due to the ability to provide specific identification, high sensitivity, and simultaneous analysis of multiple analytes (>100) in recent years, application of MS in routine clinical laboratories has increased significantly. Although MS is used in many laboratory areas, therapeutic drug monitoring, drugs of abuse, and clinical toxicology remain the primary focuses of the field. Due to rapid increase in the number of prescription drugs and drugs of abuse (e.g., novel psychoactive substances), clinical laboratories are challenged with developing new MS assays to meet the clinical needs of the patients. We are here to present "off-the-shelf" and "ready-to-use" protocols of recent developments in new assays to help the clinical laboratory community adopt the technology and analysis for the betterment of patient care.

Analytical Concordance of Total Vitamin D on a Fully Automated Random-Access LC-MS/MS Platform

BACKGROUND

The adoption of LC-MS/MS laboratory developed tests in the clinical laboratory is limited by many factors including the lack of automation. Recently, the Cascadion™ clinical analyzer was introduced as a fully automated random-access LC-MS/MS platform. Here, the analytical concordance between the platform and a Roche immunoassay analyzer was investigated for vitamin D analysis in human serum, including samples selected for high triglyceride levels.

METHODS

Analytical precision was evaluated on 3 levels of QC samples (10, 30, and 90 ng/mL) within days (n = 4, 5 days) and between days (20 days). Assay comparison to the Roche was performed using reference samples from the CDC and CAP programs for accuracy. Concordance was also monitored using routine patient samples, as well as samples selected for elevated triglyceride levels (>250 mg/dL).

RESULTS

Precision met manufacturer specifications (<10% CV and <15% bias), whereas the accuracy evaluations showed a linear fit (y = 0.97x - 1.1, r = 0.995) with 1:1 correlation to reference samples, independent of C-3-epi-vitamin D levels. A mean positive bias (11%) was observed for the Roche measurements in normal patient samples, whereas a mean negative bias (-8%) was observed in samples selected for elevated triglyceride levels.

CONCLUSIONS

Cascadion measurements of total vitamin D compared favorably with Roche results in our laboratory, although discordance was observed in the analysis of patient serum, which could be explained in terms of known differences between the 2 assays. However, operational issues need to be addressed to effect clinical adoption.

Mass spectrometry-based proteomics as an emerging tool in clinical laboratories

Mass spectrometry (MS)-based proteomics have been increasingly implemented in various disciplines of laboratory medicine to identify and quantify biomolecules in a variety of biological specimens. MS-based proteomics is continuously expanding and widely applied in biomarker discovery for early detection, prognosis and markers for treatment response prediction and monitoring. Furthermore, making these advanced tests more accessible and affordable will have the greatest healthcare benefit.This review article highlights the new paradigms MS-based clinical proteomics has created in microbiology laboratories, cancer research and diagnosis of metabolic disorders. The technique is preferred over conventional methods in disease detection and therapy monitoring for its combined advantages in multiplexing capacity, remarkable analytical specificity and sensitivity and low turnaround time.Despite the achievements in the development and adoption of a number of MS-based clinical proteomics practices, more are expected to undergo transition from bench to bedside in the near future. The review provides insights from early trials and recent progresses (mainly covering literature from the NCBI database) in the application of proteomics in clinical laboratories.

Direct oral anticoagulants (DOACs): From the laboratory point of view

Direct oral anticoagulants (DOACs) represent a new generation of drugs that have been increasingly used in the prevention and treatment of thromboembolic states. According to the mechanism of anticoagulant action, DOACs are divided into two groups: direct inhibitors of thrombin (dabigatran) and direct inhibitors of activated factor X (FXa) (rivaroxaban, apixaban, edoxaban, betrixaban). Compared to the vitamin K antagonists, DOACs are superior in terms of onset of action, pharmacokinetic and pharmacodynamics properties and fixed daily dose without the need for routine coagulation monitoring. Despite these advantages, there are clinical conditions in which laboratory measurement of DOACs should be performed. Although DOACs have an impact on screening haemostasis assays (prothrombin time, PT; activated partial thromboplastin time, aPTT; and thrombin time, TT), these tests are not appropriate for quantifying drug levels. Therefore, specific quantitative methods (LC-MS/MS as a gold standard method for all DOACs, coagulometric and chromogenic assays for dabigatran, and chromogenic anti-Xa assays with drug-specific calibrators for inhibitors of FXa) should only be used for determination of DOACs concentration. The aim of this review is to present all aspects of laboratory assessment of DOACs, including pre-analytical, analytical and post-analytical factors in the overall testing process with a special accent on the available specific quantitative methods for measurement of DOACs in circulation.

Introduction to Mass Spectrometry for Bimolecular Analysis in a Clinical Laboratory

Mass spectrometry is a technique that identifies analytes based on mass-to-charge (m/z) ratio and structural fragments. Although this technique has been used in research and specialized clinical laboratories for decades, only in recent years has mass spectrometry become popular in routine clinical laboratories. Mass spectrometry, especially when coupled with gas chromatography or liquid chromatography, provides very specific and often sensitive analysis of many analytes. Other advantages of mass spectrometry include simultaneous analysis of multiple analytes (>100) and generally limited requirement for specialized reagents. Commonly measured analytes by mass spectrometry include metabolites, drugs, hormones, and proteins.

Development and validation of a paper spray mass spectrometry method for the rapid quantitation of remdesivir and its active metabolite, GS-441524, in human plasma

•

Rapid PS-MS/MS quantification of remdesivir and its active metabolite, GS-441524, directly from plasma.

•

No sample preparation, short turn-around time, use of stable isotope-labeled internal standards.

•

Robust stability data are presented.

•

Suitable for adjusting remdesivir dosage for optimal efficacy and minimal toxicity.

Introduction

Remdesivir (GS-5734) is a nucleoside analog prodrug with antiviral activity against several single-stranded RNA viruses, including the novel severe respiratory distress syndrome virus 2 (SARS-CoV-2). It is currently the only FDA-approved antiviral agent for the treatment of individuals with COVID-19 caused by SARS-CoV-2. However, remdesivir pharmacokinetics/pharmacodynamics (PK/PD) and toxicity data in humans are extremely limited. It is imperative that precise analytical methods for the quantification of remdesivir and its active metabolite, GS-441524, are developed for use in further studies. We report, herein, the first validated anti-viral paper spray-mass spectrometry (PS-MS/MS) assay for the quantification of remdesivir and GS-441524 in human plasma. We seek to highlight the utility of PS-MS/MS technology and automation advancements for its potential future use in clinical research and the clinical laboratory setting.

Methods

Calibration curves for remdesivir and GS-441524 were created utilizing seven plasma-based calibrants of varying concentrations and two isotopic internal standards of set concentrations. Four plasma-based quality controls were prepared in a similar fashion to the calibrants and utilized for validation. No sample preparation was needed. Briefly, plasma samples were spotted on a paper substrate contained within pre-manufactured plastic cassette plates, and the spots were dried for 1 h. The samples were then analyzed directly for 1.2 min utilizing PS-MS/MS. All experiments were performed on a Thermo Scientific Altis triple quadrupole mass spectrometer utilizing automated technology.

Results

The calibration ranges were 20 – 5000 and 100 – 25000 ng/mL for remdesivir and GS-441524, respectively. The calibration curves for the two antiviral agents showed excellent linearity (average R² = 0.99–1.00). The inter- and intra-day precision (%CV) across validation runs at four QC levels for both analytes was less than 11.2% and accuracy (%bias) was within ± 15%. Plasma calibrant stability was assessed and degradation for the 4 °C and room temperature samples were seen beginning at Day 7. The plasma calibrants were stable at −20 °C. No interference, matrix effects, or carryover was discovered during the validation process.

Conclusions

PS-MS/MS represents a useful methodology for rapidly quantifying remdesivir and GS-441524, which may be useful for clinical PK/PD, therapeutic drug monitoring (TDM), and toxicity assessment, particularly during the current COVID-19 pandemic and future viral outbreaks.

Liquid chromatography–tandem mass spectrometry for clinical diagnostics

Mass spectrometry is a powerful analytical tool used for the analysis of a wide range of substances and matrices; it is increasingly utilized for clinical applications in laboratory medicine. This Primer includes an overview of basic mass spectrometry concepts, focusing primarily on tandem mass spectrometry. We discuss experimental considerations and quality management, and provide an overview of some key applications in the clinic. Lastly, the Primer discusses significant challenges for implementation of mass spectrometry in clinical laboratories and provides an outlook of where there are emerging clinical applications for this technology.

Tandem mass spectrometry is increasingly utilized for clinical applications in laboratory medicine. In this Primer, Thomas et al. discuss experimental considerations and quality management for implementing clinical tandem mass spectrometry in the clinic with an overview of some key applications.

Simultaneous quantitation of five triazole anti-fungal agents by paper spray-mass spectrometry

Background Invasive fungal disease is a life-threatening condition that can be challenging to treat due to pathogen resistance, drug toxicity, and therapeutic failure secondary to suboptimal drug concentrations. Frequent therapeutic drug monitoring (TDM) is required for some anti-fungal agents to overcome these issues. Unfortunately, TDM at the institutional level is difficult, and samples are often sent to a commercial reference laboratory for analysis. To address this gap, the first paper spray-mass spectrometry assay for the simultaneous quantitation of five triazoles was developed. Methods Calibration curves for fluconazole, posaconazole, itraconazole, hydroxyitraconazole, and voriconazole were created utilizing plasma-based calibrants and four stable isotopic internal standards. No sample preparation was needed. Plasma samples were spotted on a paper substrate in pre-manufactured plastic cartridges, and the dried plasma spots were analyzed directly utilizing paper spray-mass spectrometry (paper spray MS/MS). All experiments were performed on a Thermo Scientific TSQ Vantage triple quadrupole mass spectrometer. Results The calibration curves for the five anti-fungal agents showed good linearity (R2 = 0.98-1.00). The measured assay ranges (lower limit of quantification [LLOQ]-upper limit of quantitation [ULOQ]) for fluconazole, posaconazole, itraconazole, hydroxyitraconazole, and voriconazole were 0.5-50 μg/mL, 0.1-10 μg/mL, 0.1-10 μg/mL, 0.1-10 μg/mL, and 0.1-10 μg/mL, respectively. The inter- and intra-day accuracy and precision were less than 25% over the respective ranges. Conclusions We developed the first rapid paper spray-MS/MS assay for simultaneous quantitation of five triazole anti-fungal agents in plasma. The method may be a powerful tool for near-point-of-care TDM aimed at improving patient care by reducing the turnaround time and for use in clinical research.

High-throughput quantification of carboxymethyl lysine in serum and plasma using high-resolution accurate mass Orbitrap mass spectrometry

BACKGROUND

Carboxymethyl lysine is an advanced glycation end product of interest as a potential biomarker of cardiovascular and other diseases. Available methods involve ELISA, with potential interference, or isotope dilution mass spectrometry (IDMS), with low-throughput sample preparation.

METHODS

A high-throughput sample preparation method based on 96-well plates was developed. Protein-bound carboxymethyl lysine and lysine were quantified by IDMS using reversed phase chromatography coupled to a high-resolution accurate mass Orbitrap Exactive mass spectrometer. The carboxymethyl lysine concentration (normalized to lysine concentration) was measured in 1714 plasma samples from the British Regional Heart Study (BRHS).

RESULTS

For carboxymethyl lysine, the lower limit of quantification (LLOQ) was estimated at 0.16 μM and the assay was linear between 0.25 and 10 μM. For lysine, the LLOQ was estimated at 3.79 mM, and the assay was linear between 2.5 and 100 mM. The intra-assay coefficient of variation was 17.2% for carboxymethyl lysine, 9.3% for lysine and 10.5% for normalized carboxymethyl lysine. The inter-assay coefficient of variation was 18.1% for carboxymethyl lysine, 14.8 for lysine and 16.2% for normalized carboxymethyl lysine. The median and inter-quartile range of all study samples in each batch were monitored. A mean carboxymethyl lysine concentration of 2.7 μM (IQR 2.0-3.2 μM, range 0.2-17.4 μM) and a mean normalized carboxymethyl lysine concentration of 69 μM/M lysine (IQR 54-76 μM/M, range 19-453 μM/M) were measured in the BRHS.

CONCLUSION

This high-throughput sample preparation method makes it possible to analyse large cohorts required to determine the potential of carboxymethyl lysine as a biomarker.

Mass Spectrometry in Clinical Laboratory: Applications in Biomolecular Analysis

Mass spectrometry (MS) is a technique that can identify analytes on the basis of mass-to-charge (m/z) ratio. Although this technique has been used in research and specialized clinical laboratories for decades, however, in recent years, MS has been increasingly used in routine clinical laboratories. MS, especially when coupled to gas chromatography or liquid chromatography, provides very specific and often sensitive analysis of many analytes. Other advantages of MS include simultaneous analysis of multiple analytes (>100) and generally without need for specialized reagents. Commonly measured analytes by MS include drugs, hormones, and proteins.

Mass Spectrometry in Clinical Laboratory: Applications in Therapeutic Drug Monitoring and Toxicology

Mass spectrometry (MS) has been used in research and specialized clinical laboratories for decades as a very powerful technology to identify and quantify compounds. In recent years, application of MS in routine clinical laboratories has increased significantly. This is mainly due to the ability of MS to provide very specific identification, high sensitivity, and simultaneous analysis of multiple analytes (>100). The coupling of tandem mass spectrometry with gas chromatography (GC) or liquid chromatography (LC) has enabled the rapid expansion of this technology. While applications of MS are used in many clinical areas, therapeutic drug monitoring, drugs of abuse, and clinical toxicology are still the primary focuses of the field. It is not uncommon to see mass spectrometry being used in routine clinical practices for those applications.

Rugged and accurate quantitation of colchicine in human plasma to support colchicine poisoning monitoring by using turbulent-flow LC–MS/MS analysis

Background: Colchicine is a common drug used in inflammatory diseases. The narrow therapeutic index requires fast and reliable techniques for its quantitation. An online, automated sample preparation using TurboFlow™ technology combined with triple-stage quadrupole MS detection was applied to identify colchicine in human plasma and follow intoxications. Methodology: Plasma samples (200 µl) were mixed with deuterated colchicine and protein precipitation ZnSO4 solutions. After centrifugation, supernatants were extracted onto a Cyclone P TurboFlow column and eluted onto a narrowbore Hypersil™ GOLD column with a methanol/water gradient. Analytes were monitored in SRM mode (positive electrospray). Results: Total run time was 9.5 min. Calibration curves ranged from 0.342 to 17.1 ng/ml, with significant linearity (R2 >0.99). Inter- and intra-assay precisions were <16.8% and accuracy was 84.4–110%. Conclusion: This method is suitable for monitoring intoxication in patients undergoing chronic treatment and is routinely applied to toxicological samples.