Efficient transformation of Lactococcus lactis IL1403 and generation of knock-out mutants by homologous recombination

Recent progress on n-butanol production by lactic acid bacteria

n-Butanol is an essential chemical intermediate produced through microbial fermentation. However, its toxicity to microbial cells has limited its production to a great extent. The anaerobe lactic acid bacteria (LAB) are the most resistant to n-butanol, so it should be the first choice for improving n-butanol production. The present article aims to review the following aspects of n-butanol production by LAB: (1) the tolerance of LAB to n-butanol, including its tolerance level and potential tolerance mechanisms; (2) genome editing tools in the n-butanol-resistant LAB; (3) methods of LAB modification for n-butanol production and the production levels after modification. This review will provide a theoretical basis for further research on n-butanol production by LAB.

Improvement of electroporation-mediated transformation efficiency for a Bifidobacterium strain to a reproducibly high level

Bifidobacteria are representative probiotics which are defined as live microorganisms that confer a health benefit on the host. Because of their safety and healthfulness when applied to humans, bifidobacteria are suitable as genetically engineered bacteria for applications to benefit human physiology and pathology. However, molecular biological studies of bifidobacteria have been limited due to insufficient genetic tools including effective transformation methods. The aim of this study is to improve the electroporation-mediated transformation efficiency of bifidobacteria to a reproducibly high level. The crucial factors that determine electroporation efficiency are the restriction-modification system, together with the cell wall and cell membrane structure of the bacteria. We optimized the bifidobacterial electroporation conditions by focusing on these factors as well as the amount of plasmid DNA used, the electrical parameters and the bacterial growth phase. As a result, the electroporation efficiency of B. bifidum BGN4 drastically and consistently increased from 10³ to 10⁵ CFU / μg DNA. The most significant factor for increasing the electroporation efficiency was the cell wall weakening mediated by NaCl, which improved the electroporation frequency by 20 times. Because the optimized electrotransformation conditions reported here should be widely applicable to other Bifidobacterium species, these could promote the extensive genetic manipulation of the various Bifidobacterium species in future studies.

Production of Ginsenoside F2 by Using Lactococcus lactis with Enhanced Expression of β-Glucosidase Gene from Paenibacillus mucilaginosus

This study aimed to produce a pharmacologically active minor ginsenoside F2 from the major ginsenosides Rb1 and Rd by using a recombinant Lactococcus lactis strain expressing a heterologous β-glucosidase gene. The nucleotide sequence of the gene (BglPm) was derived from Paenibacillus mucilaginosus and synthesized after codon optimization, and the two genes (unoptimized and optimized) were expressed in L. lactis NZ9000. Codon optimization resulted in reduction of unfavorable codons by 50% and a considerable increase in the expression levels (total activities) of β-glucosidases (0.002 unit/mL, unoptimized; 0.022 unit/mL, optimized). The molecular weight of the enzyme was 52 kDa, and the purified forms of the enzymes could successfully convert Rb1 and Rd into F2. The permeabilized L. lactis expressing BglPm resulted in a high conversion yield (74%) of F2 from the ginseng extract. Utilization of this microbial cell to produce F2 may provide an alternative method to increase the health benefits of Panax ginseng.

Expanding the recombinant protein quality in Lactococcus lactis

Background

Escherichia coli has been a main host for the production of recombinant proteins of biomedical interest, but conformational stress responses impose severe bottlenecks that impair the production of soluble, proteolytically stable versions of many protein species. In this context, emerging Generally Recognized As Safe (GRAS) bacterial hosts provide alternatives as cell factories for recombinant protein production, in which limitations associated to the use of Gram-negative microorganisms might result minimized. Among them, Lactic Acid Bacteria and specially Lactococcus lactis are Gram-positive GRAS organisms in which recombinant protein solubility is generically higher and downstream facilitated, when compared to E. coli. However, deep analyses of recombinant protein quality in this system are still required to completely evaluate its performance and potential for improvement.

Results

We have explored here the conformational quality (through specific fluorescence emission) and solubility of an aggregation-prone GFP variant (VP1GFP) produced in L. lactis. In this context, our results show that parameters such as production time, culture conditions and growth temperature have a dramatic impact not only on protein yield, but also on protein solubility and conformational quality, that are particularly favored under fermentative metabolism.

Conclusions

Metabolic regime and cultivation temperature greatly influence solubility and conformational quality of an aggregation-prone protein in L. lactis. Specifically, the present study proves that anaerobic growth is the optimal condition for recombinant protein production purposes. Besides, growth temperature plays an important role regulating both protein solubility and conformational quality. Additionally, our results also prove the great versatility for the manipulation of this bacterial system regarding the improvement of functionality, yield and quality of recombinant proteins in this species. These findings not only confirm L. lactis as an excellent producer of recombinant proteins but also reveal room for significant improvement by the exploitation of external protein quality modulators.

The protective effect of recombinant FomA-expressing Lactobacillus acidophilus against periodontal infection

A number of studies have shown that the outer membrane protein FomA found in Fusobacterium nucleatum demonstrates great potential as an immune target for combating periodontitis. Lactobacillus acidophilus is a useful antigen delivery vehicle for mucosal immunisation, and previous studies by our group have shown that L. acidophilus acts as a protective factor in periodontal health. In this study, making use of the immunogenicity of FomA and the probiotic properties of L. acidophilus, we constructed a recombinant form of L. acidophilus expressing the FomA protein and detected the FomA-specific IgG in the serum and sIgA in the saliva of mice through oral administration with the recombinant strains. When serum containing FomA-specific antibodies was incubated with the F. nucleatum in vitro, the number of Porphyromonas gingivalis cells that coaggregated with the F. nucleatum cells was significantly reduced. Furthermore, a mouse gum abscess model was successfully generated, and the range of gingival abscesses in the immune mice was relatively limited compared with the control group. The level of IL-1β in the serum and local gum tissues of the immune mice was consistently lower than in the control group. Our findings indicated that oral administration of the recombinant L. acidophilus reduced the risk of periodontal infection with P. gingivalis and F. nucleatum.

Two-tiered biological containment strategy for Lactococcus lactis-based vaccine or immunotherapy vectors

The concept of biological containment was developed as a strategy to prevent environmental dissemination of engineered live vaccine or drug delivery vehicles. A mutation in the gene encoding thymidylate synthase (thyA), a key enzyme in the pyrimidine biosynthetic pathway, has previously been shown to limit growth of L. lactis vectors under restrictive conditions. We hypothesized that further mutations in the pyrimidine biosynthetic pathway might enhance the stability and safety of live L. lactis vectors. We show that a double mutation in the genes encoding ThyA and CTP synthase (PyrG) in L. lactis confers double auxotrophy for both thymidine and cytidine. However, the combination of two mutations failed to enhance the biological containment phenotype of the engineered strain. In the absence of thymine/thymidine, the thyA mutant exhibited a strong bactericidal phenotype. However, creation of the double mutant caused the loss of this phenotype, though survival in the mouse GI tract was enhanced. The implications for biological containment of live L. lactis based delivery vectors are discussed.

Non-enzymic copper reduction by menaquinone enhances copper toxicity in Lactococcus lactis IL1403

Lactococcus lactis possesses a pronounced extracellular Cu(2+)-reduction activity which leads to the accumulation of Cu(+) in the medium. The kinetics of this reaction were not saturable by increasing copper concentrations, suggesting a non-enzymic reaction. A copper-reductase-deficient mutant, isolated by random transposon mutagenesis, had an insertion in the menE gene, which encodes O-succinylbenzoic acid CoA ligase. This is a key enzyme in menaquinone biosynthesis. The ΔmenE mutant was deficient in short-chain menaquinones, and exogenously added menaquinone complemented the copper-reductase-deficient phenotype. Haem-induced respiration of wild-type L. lactis efficiently suppressed copper reduction, presumably by competition by the bd-type quinol oxidase for menaquinone. As expected, the ΔmenE mutant was respiration-deficient, but could be made respiration-proficient by supplementation with menaquinone. Growth of wild-type cells was more copper-sensitive than that of the ΔmenE mutant, due to the production of Cu(+) ions by the wild-type. This growth inhibition of the wild-type was strongly attenuated if Cu(+) was scavenged with the Cu(I) chelator bicinchoninic acid. These findings support a model whereby copper is non-enzymically reduced at the membrane by menaquinones. Respiration effectively competes for reduced quinones, which suppresses copper reduction. These findings highlight novel links between copper reduction, respiration and Cu(+) toxicity in L. lactis.

Molecular characterization and structural instability of the industrially important composite metabolic plasmid pLP712

The widely used plasmid-free Lactococcus lactis strain MG1363 was derived from the industrial dairy starter strain NCDO712. This strain carries a 55.39 kb plasmid encoding genes for lactose catabolism and a serine proteinase involved in casein degradation. We report the DNA sequencing and annotation of pLP712, which revealed additional metabolic genes, including peptidase F, d-lactate dehydrogenase and α-keto acid dehydrogenase (E3 complex). Comparison of pLP712 with other large lactococcal lactose and/or proteinase plasmids from L. lactis subsp. cremoris SK11 (pSK11L, pSK11P) and the plant strain L. lactis NCDO1867 (pGdh442) revealed their close relationship. The plasmid appears to have evolved through a series of genetic events as a composite of pGdh442, pSK11L and pSK11P. We describe in detail a scenario by which the metabolic genes relevant to the growth of its host in a milk environment have been unified on one replicon, reflecting the evolution of L. lactis as it changed its biological niche from plants to dairy environments. The extensive structural instability of pLP712 allows easy isolation of derivative plasmids lacking genes for casein degradation and/or lactose catabolism. Plasmid pLP712 is transferable by transduction and conjugation, and both of these processes result in significant molecular rearrangements. We report the detailed molecular analysis of insertion sequence element-mediated genetic rearrangements within pLP712 and several different mechanisms, including homologous recombination and adjacent deletion. Analysis of the integration of the lactose operon into the chromosome highlights the fluidity of the MG1363 integration hotspot and the potential for frequent movement of genes between plasmids and chromosomes in Lactococcus.

The streptococcal collagen-like protein-1 (Scl1) is a significant determinant for biofilm formation by group A Streptococcus

Background

Group A Streptococcus (GAS) is a human-specific pathogen responsible for a number of diseases characterized by a wide range of clinical manifestations. During host colonization GAS-cell aggregates or microcolonies are observed in tissues. GAS biofilm, which is an in vitro equivalent of tissue microcolony, has only recently been studied and little is known about the specific surface determinants that aid biofilm formation. In this study, we demonstrate that surface-associated streptococcal collagen-like protein-1 (Scl1) plays an important role in GAS biofilm formation.

Results

Biofilm formation by M1-, M3-, M28-, and M41-type GAS strains, representing an intraspecies breadth, were analyzed spectrophotometrically following crystal violet staining, and characterized using confocal and field emission scanning electron microscopy. The M41-type strain formed the most robust biofilm under static conditions, followed by M28- and M1-type strains, while the M3-type strains analyzed here did not form biofilm under the same experimental conditions. Differences in architecture and cell-surface morphology were observed in biofilms formed by the M1- and M41-wild-type strains, accompanied by varying amounts of deposited extracellular matrix and differences in cell-to-cell junctions within each biofilm. Importantly, all Scl1-negative mutants examined showed significantly decreased ability to form biofilm in vitro. Furthermore, the Scl1 protein expressed on the surface of a heterologous host, Lactococcus lactis, was sufficient to induce biofilm formation by this organism.

Conclusions

Overall, this work (i) identifies variations in biofilm formation capacity among pathogenically different GAS strains, (ii) identifies GAS surface properties that may aid in biofilm stability and, (iii) establishes that the Scl1 surface protein is an important determinant of GAS biofilm, which is sufficient to enable biofilm formation in the heterologous host Lactococcus. In summary, the GAS surface adhesin Scl1 may have an important role in biofilm-associated pathogenicity.

Structure and function of CinD (YtjD) of Lactococcus lactis, a copper-induced nitroreductase involved in defense against oxidative stress

In Lactococcus lactis IL1403, 14 genes are under the control of the copper-inducible CopR repressor. This so-called CopR regulon encompasses the CopR regulator, two putative CPx-type copper ATPases, a copper chaperone, and 10 additional genes of unknown function. We addressed here the function of one of these genes, ytjD, which we renamed cinD (copper-induced nitroreductase). Copper, cadmium, and silver induced cinD in vivo, as shown by real-time quantitative PCR. A knockout mutant of cinD was more sensitive to oxidative stress exerted by 4-nitroquinoline-N-oxide and copper. Purified CinD is a flavoprotein and reduced 2,6-dichlorophenolindophenol and 4-nitroquinoline-N-oxide with k(cat) values of 27 and 11 s(-1), respectively, using NADH as a reductant. CinD also exhibited significant catalase activity in vitro. The X-ray structure of CinD was resolved at 1.35 A and resembles those of other nitroreductases. CinD is thus a nitroreductase which can protect L. lactis against oxidative stress that could be exerted by nitroaromatic compounds and copper.

The utility of affinity-tags for detection of a streptococcal protein from a variety of streptococcal species

There is no systematic examination of affinity tag utility in Gram-positive bacteria, which limits the investigation of protein function in this important group of bacteria as specific antibodies for many of native proteins are generally not available. In this study, we utilized an E. coli-streptococcal shuttle vector pVT1666 and constructed two sets of expression plasmids pVPT-CTag and pVPT-NTag, with each set containing five affinity tags (GST, GFP, HSV, T7 and Nano) that can be fused to either the C- or N-terminus of a target protein. A putative glycosyltransferase (Gtf2) essential for Fap1 glycosylation was used to demonstrate the utility of the cassettes in detection of Gtf2 fusion proteins, and the biological relevance of the proteins in our working strain Streptococcus parasanguinis. GFP and T7 tags were readily expressed in S. parasanguinis as either an N- or C-terminal fusion to Gtf2. Only the C- terminal fusion of GST and HSV were able to be identified in S. parasanguinis. The Nano tag was not detected in either E. coli or S. parasanguinis. Genetic complementation experiments indicated that all the tagged Gtf2 fusion proteins could restore the Gtf2 function in the null mutant except for the Nano-tagged Gtf2 at its N-terminal fusion. Using a T7-tagged Gtf2 fusion construct, we demonstrated that the fusion cassette is also useful in detection of the fusion tag expression in other streptococci including S. mutans, S. pneumoniae and S. sanguinis. Therefore, the expression cassettes we constructed will be a useful tool not only to investigate protein-protein interactions in Fap1 biogenesis in S. parasanguinis, but also to study protein functions in other gram-positive bacteria in which pVT1666 replicates.

Characterization of the CopR regulon of Lactococcus lactis IL1403

To identify components of the copper homeostatic mechanism of Lactococcus lactis, we employed two-dimensional gel electrophoresis to detect changes in the proteome in response to copper. Three proteins upregulated by copper were identified: glyoxylase I (YaiA), a nitroreductase (YtjD), and lactate oxidase (LctO). The promoter regions of these genes feature cop boxes of consensus TACAnnTGTA, which are the binding site of CopY-type copper-responsive repressors. A genome-wide search for cop boxes revealed 28 such sequence motifs. They were tested by electrophoretic mobility shift assays for the interaction with purified CopR, the CopY-type repressor of L. lactis. Seven of the cop boxes interacted with CopR in a copper-sensitive manner. They were present in the promoter region of five genes, lctO, ytjD, copB, ydiD, and yahC; and two polycistronic operons, yahCD-yaiAB and copRZA. Induction of these genes by copper was confirmed by real-time quantitative PCR. The copRZA operon encodes the CopR repressor of the regulon; a copper chaperone, CopZ; and a putative copper ATPase, CopA. When expressed in Escherichia coli, the copRZA operon conferred copper resistance, suggesting that it functions in copper export from the cytoplasm. Other member genes of the CopR regulon may similarly be involved in copper metabolism.

Copper induction of lactate oxidase of Lactococcus lactis: a novel metal stress response

Lactococcus lactis IL1403, a lactic acid bacterium widely used for food fermentation, is often exposed to stress conditions. One such condition is exposure to copper, such as in cheese making in copper vats. Copper is an essential micronutrient in prokaryotes and eukaryotes but can be toxic if in excess. Thus, copper homeostatic mechanisms, consisting chiefly of copper transporters and their regulators, have evolved in all organisms to control cytoplasmic copper levels. Using proteomics to identify novel proteins involved in the response of L. lactis IL1403 to copper, cells were exposed to 200 muM copper sulfate for 45 min, followed by resolution of the cytoplasmic fraction by two-dimensional gel electrophoresis. One protein strongly induced by copper was LctO, which was shown to be a NAD-independent lactate oxidase. It catalyzed the conversion of lactate to pyruvate in vivo and in vitro. Copper, cadmium, and silver induced LctO, as shown by real-time quantitative PCR. A copper-regulatory element was identified in the 5' region of the lctO gene and shown to interact with the CopR regulator, encoded by the unlinked copRZA operon. Induction of LctO by copper represents a novel copper stress response, and we suggest that it serves in the scavenging of molecular oxygen.