Influence of macromolecular crowding upon the stability and state of association of proteins: predictions and observations

Quantitative turbidimetric characterization of stabilized complex coacervate dispersions

Stabilizing complex coacervate microdroplets is desirable due to their various applications, such as bioreactors, drug delivery vehicles, and encapsulants. Here, we present quantitative characterization of complex coacervate dispersion stability inferred by turbidimetry measurements. The stability of the dispersions is shown to be modulated by the concentrations of comb polyelectrolyte (cPE) stabilizers and salt. We demonstrate cPEs as effective stabilizers for complex coacervate dispersions independent of the chemistry or length of the constituent polyelectrolytes, salts, or preparation routes. By monitoring the temporal evolution of dispersion turbidity, we show that cPEs suppress microdroplet coalescence with minimal change in microdroplet sizes over 48 hours, even at salt concentrations up to 300 mM. The number density and average microdroplet size are shown to be controlled by varying the cPE and salt concentrations. Lastly, turbidity maps, akin to binodal phase maps, depict an expansion of the turbid two-phase region and an increase in the salt resistance of the coacervates upon the introduction of cPEs. The coacervate salt resistance is shown to increase by >3×, and this increase is maintained for up to 15 days, demonstrating that cPEs impart higher salt resistance over extended durations.

Interactive biocatalysis achieved by driving enzyme cascades inside a porous conducting material

An emerging concept and platform, the electrochemical Leaf (e-Leaf), offers a radical change in the way tandem (multi-step) catalysis by enzyme cascades is studied and exploited. The various enzymes are loaded into an electronically conducting porous material composed of metallic oxide nanoparticles, where they achieve high concentration and crowding - in the latter respect the environment resembles that found in living cells. By exploiting efficient electron tunneling between the nanoparticles and one of the enzymes, the e-Leaf enables the user to interact directly with complex networks, rendering simultaneous the abilities to energise, control and observe catalysis. Because dispersion of intermediates is physically suppressed, the output of the cascade - the rate of flow of chemical steps and information - is delivered in real time as electrical current. Myriad enzymes of all major classes now become effectively electroactive in a technology that offers scalability between micro-(analytical, multiplex) and macro-(synthesis) levels. This Perspective describes how the e-Leaf was discovered, the steps in its development so far, and the outlook for future research and applications.

What Can Be Learned from the Partitioning Behavior of Proteins in Aqueous Two-Phase Systems?

This review covers the analytical applications of protein partitioning in aqueous two-phase systems (ATPSs). We review the advancements in the analytical application of protein partitioning in ATPSs that have been achieved over the last two decades. Multiple examples of different applications, such as the quality control of recombinant proteins, analysis of protein misfolding, characterization of structural changes as small as a single-point mutation, conformational changes upon binding of different ligands, detection of protein-protein interactions, and analysis of structurally different isoforms of a protein are presented. The new approach to discovering new drugs for a known target (e.g., a receptor) is described when one or more previous drugs are already available with well-characterized biological efficacy profiles.

Crowder titrations enable the quantification of driving forces for macromolecular phase separation

Macromolecular solubility is an important contributor to the driving forces for phase separation. Formally, the driving forces in a binary mixture comprising a macromolecule dissolved in a solvent can be quantified in terms of the saturation concentration, which is the threshold macromolecular concentration above which the mixture separates into coexisting dense and dilute phases. In addition, the second virial coefficient, which measures the effective strength of solvent-mediated intermolecular interactions provides direct assessments of solvent quality. The sign and magnitude of second virial coefficients will be governed by a combination of solution conditions and the nature of the macromolecule of interest. Here, we show, using a combination of theory, simulation, and in vitro experiments, that titrations of crowders, providing they are true depletants, can be used to extract the intrinsic driving forces for macromolecular phase separation. This refers to saturation concentrations in the absence of crowders and the second virial coefficients that quantify the magnitude of the incompatibility between macromolecules and the solvent. Our results show how the depletion-mediated attractions afforded by crowders can be leveraged to obtain comparative assessments of macromolecule-specific, intrinsic driving forces for phase separation.

Leveraging bioanalytical characterization of fractionated monoclonal antibody pools to identify aggregation-prone and less filterable proteoforms during virus filtration

Monoclonal antibodies (mAbs) are an essential class of biotherapeutics. A platform process is used for mAb development to ensure clinically safe and stable molecules. Regulatory authorities ensure that mAb production processes include sufficient viral clearance steps to achieve less than one virus particle per million doses of product. Virus filtration is used for size-based removal of enveloped and nonenveloped viruses during downstream processing of mAbs. Process development in mAb purification relies on empirical approaches and often includes adsorptive prefiltration to mitigate virus filter fouling. Opportunities for molecular-level prediction of mAb filterability are needed to plug the existing knowledge gap in downstream processing. A molecular-level approach to understanding the factors influencing mAb filterability may reduce process development time, material loss, and processing costs due to oversized virus filters. In this work, pH step gradient fractionation was applied on polished bulk mAb feed to obtain concentrated pools of fractionated mAb variants. Biophysical properties and quality attributes of fractionated pools, including oligomeric state (size), isoelectric point profile, diffusion interaction parameters, and glycoform profile, were determined using bioanalytical methods. Filterability (loading and throughput) of fractionated pools were evaluated. Statistical methods were used to obtain correlations between quality attributes of mAb fractions and filterability on the Viresolve Pro virus filter.

Extraction of Soluble Proteins from Leaves

Protein biochemistry can provide valuable answers to better understand plant performance and responses to the surrounding environment. In this chapter, we describe the process of extracting proteins from plant leaf samples. We highlight the key aspects to take into consideration to preserve protein integrity, from sample collection to extraction and preparation or storage for subsequent analysis of protein abundance and/or enzymatic activities.

Effects of Crowding and Cosolutes on Biomolecular Function at Extreme Environmental Conditions

The extent of the effect of cellular crowding and cosolutes on the functioning of proteins and cells is manifold and includes the stabilization of the biomolecular systems, the excluded volume effect, and the modulation of molecular dynamics. Simultaneously, it is becoming increasingly clear how important it is to take the environment into account if we are to shed light on biological function under various external conditions. Many biosystems thrive under extreme conditions, including the deep sea and subseafloor crust, and can take advantage of some of the effects of crowding. These relationships have been studied in recent years using various biophysical techniques, including neutron and X-ray scattering, calorimetry, FTIR, UV-vis and fluorescence spectroscopies. Combining knowledge of the structure and conformational dynamics of biomolecules under extreme conditions, such as temperature, high hydrostatic pressure, and high salinity, we highlight the importance of considering all results in the context of the environment. Here we discuss crowding and cosolute effects on proteins, nucleic acids, membranes, and live cells and explain how it is possible to experimentally separate crowding-induced effects from other influences. Such findings will contribute to a better understanding of the homeoviscous adaptation of organisms and the limits of life in general.

Effects of Homogeneous and Heterogeneous Crowding on Translational Diffusion of Rigid Bovine Serum Albumin and Disordered Alfa-Casein

Intracellular environment includes proteins, sugars, and nucleic acids interacting in restricted media. In the cytoplasm, the excluded volume effect takes up to 40% of the volume available for occupation by macromolecules. In this work, we tested several approaches modeling crowded solutions for protein diffusion. We experimentally showed how the protein diffusion deviates from conventional Brownian motion in artificial conditions modeling the alteration of medium viscosity and rigid spatial obstacles. The studied tracer proteins were globular bovine serum albumin and intrinsically disordered α-casein. Using the pulsed field gradient NMR, we investigated the translational diffusion of protein probes of different structures in homogeneous (glycerol) and heterogeneous (PEG 300/PEG 6000/PEG 40,000) solutions as a function of crowder concentration. Our results showed fundamentally different effects of homogeneous and heterogeneous crowded environments on protein self-diffusion. In addition, the applied "tracer on lattice" model showed that smaller crowding obstacles (PEG 300 and PEG 6000) create a dense net of restrictions noticeably hindering diffusing protein probes, whereas the large-sized PEG 40,000 creates a "less restricted" environment for the diffusive motion of protein molecules.

Crowder titrations enable the quantification of driving forces for macromolecular phase separation

Macromolecular solubility is an important contributor to the driving forces for phase separation. Formally, the driving forces in a binary mixture comprising a macromolecule dissolved in a solvent can be quantified in terms of the saturation concentration, which is the threshold macromolecular concentration above which the mixture separates into coexisting dense and dilute phases. Additionally, the second virial coefficient, which measures the effective strength of solvent-mediated intermolecular interactions provides direct assessments of solvent quality. The sign and magnitude of second virial coefficients will be governed by a combination of solution conditions and the nature of the macromolecule of interest. Here, we show, using a combination of theory, simulation, and in vitro experiments, that titrations of crowders, providing they are true depletants, can be used to extract the intrinsic driving forces for macromolecular phase separation. This refers to saturation concentrations in the absence of crowders and the second virial coefficients that quantify the magnitude of the incompatibility between macromolecules and the solvent. Our results show how the depletion-mediated attractions afforded by crowders can be leveraged to obtain comparative assessments of macromolecule-specific, intrinsic driving forces for phase separation.

SIGNIFICANCE

Phase separation has emerged as a process of significant relevance to sorting macromolecules into distinct compartments, thereby enabling spatial and temporal control over cellular matter. Considerable effort is being invested into uncovering the driving forces that enable the separation of macromolecular solutions into coexisting phases. At its heart, this process is governed by the balance of macromolecule-solvent, inter-macromolecule, and solvent-solvent interactions. We show that the driving forces for phase separation, including the coefficients that measure interaction strengths between macromolecules, can be extracted by titrating the concentrations of crowders that enable macromolecules to phase separate at lower concentrations. Our work paves the way to leverage specific categories of measurements for quantitative characterizations of driving forces for phase separation.

Crowding-Regulated Binding of Divalent Biomolecules

Macromolecular crowding affects biophysical processes as diverse as diffusion, gene expression, cell growth, and senescence. Yet, there is no comprehensive understanding of how crowding affects reactions, particularly multivalent binding. Herein, we use scaled particle theory and develop a molecular simulation method to investigate the binding of monovalent to divalent biomolecules. We find that crowding can increase or reduce cooperativity-the extent to which the binding of a second molecule is enhanced after binding a first molecule-by orders of magnitude, depending on the sizes of the involved molecular complexes. Cooperativity generally increases when a divalent molecule swells and then shrinks upon binding two ligands. Our calculations also reveal that, in some cases, crowding enables binding that does not occur otherwise. As an immunological example, we consider immunoglobulin G-antigen binding and show that crowding enhances its cooperativity in bulk but reduces it when an immunoglobulin G binds antigens on a surface.

Identification of tyrosine sulfation in the variable region of a bispecific antibody and its effect on stability and biological activity

Despite tyrosine sulfation being a relatively common post-translational modification (PTM) on the secreted proteins of higher eukaryotic organisms, there have been surprisingly few reports of this modification occurring in recombinant monoclonal antibodies (mAbs) expressed by mammalian cell lines and even less information regarding its potential impact on mAb efficacy and stability. This discrepancy is likely due to the extreme lability of this modification using many of the mass spectrometry methods typically used within the biopharmaceutical industry for PTM identification, as well as the possible misidentification as phosphorylation. Here, we identified sulfation on a single tyrosine residue located within the identical variable region sequence of a 2 + 1 bispecific mAbs heavy and heavy-heavy chains using a multi-enzymatic approach in combination with mass spectrometry analysis and examined its impact on binding, efficacy, and physical stability. Unlike previous reports, we found that tyrosine sulfation modestly decreased the mAb cell binding and T cell-mediated killing, primarily by increasing the rate of antigen disassociation as determined from surface plasmon resonance-binding experiments. We also found that, while this acidic modification had no significant impact on the mAb thermal stability, sulfation did modestly increase its rate of aggregation, presumably by lowering the mAb's colloidal stability as indicated by polyethylene glycol induced liquid-liquid phase separation experiments.

Adipose extracellular matrix deposition is an indicator of obesity and metabolic disorders

Obesity and metabolic disorders are threats to human health. Extracellular matrix (ECM) is an important member of adipose microenvironment. ECM remodeling contributes to obesity and insulin resistance, but the roles of every single ECM component is still not fully understood. We observed glucose and lipids metabolic disorders in high-fat diet (HFD)-fed mice and humans with obesity. Higher levels of inflammatory factors and hormones existed in serum of HFD-fed mice. Multiple collagens, laminins, fibronectin, nidogen, and Hspg2 were upregulated in obese white adipose tissue (WAT) from mice and humans. These effects were stronger in subcutaneous WAT than visceral WAT in mice, but the fat depot difference was reversed in humans. The ECM structure and the morphology of adipocytes seeded on ECM were changed in the HFD group. In human visceral WAT, ECM genes showed positive correlations with blood lipids and glucose. In vitro, collagen I/IV and LAMA4 proteins showed similar changes with C/EBPα during the differentiation of adipocytes. Macromolecular crowders (MMC) promoted partial collagen and non-collagen gene expression. Oleic acid (OA) and MMC upregulated collagen I/IV and LAMA4 proteins, and the effects of MMC were stronger than that of OA. Moreover, MMC promoted the differentiation of adipocytes, but OA increased the size of lipid droplets. Positive correlations were observed between ECM genes and adipogenesis-related genes in adipocytes. In conclusion, some obesogens (such as HFD) induce ECM remodeling, and the upregulation of ECM components is closely related to adipogenesis, suggesting that adipose ECM deposition is an indicator of obesity and metabolic disorders.

PEG mediated destabilization of holo α-lactalbumin probed by in silico and in vitro studies: deviation from excluded volume effect

Crowded and confined macromolecular milieus surround proteins, and both are stabilizing if the nature of the interaction between crowder and proteins are considered hard-core repulsive interactions. However, non-specific chemical interactions between a protein and its surroundings also play a significant role and the sum effect of both hard-core repulsion and soft interaction balances the overall effect of crowding/confinement. Previous studies showing the effect of polyethylene glycol (PEG) on protein and nucleic acid may be interpreted as either primarily excluded volume effect or, in some cases, chemical effect by changing solvent properties. In case of destabilizing interactions, charge-charge and hydrophobic contact have to gain more attention. For instance, in vitro and in vivo studies using protein as crowding agent revealed the destabilization of proteins induced by charge-charge interactions. To investigate the effect of PEG 10 kDa on holo α-lactalbumin (holo α-LA), structure and thermal stability of the protein were measured at different pH values using several techniques. Structural characterization by Trp-fluorescence, near-UV CD and far-UV measurements at different pH values clearly shows perturbation of tertiary and secondary structure of holo α-LA by PEG 10 kDa. Furthermore, the dynamic light scattering measurement shows that the protein is homogeneous under all experimental conditions. Analysis of the heat-induced denaturation profile in the presence of the crowder shows destabilization of the protein in terms of T_m (midpoint of denaturation) and ΔG_D⁰ (Gibbs free energy change at 25 °C). To evaluate the interaction of PEG 10 kDa with holo α-LA and stability of PEG-α-LA complex, docking and molecular dynamic simulation were carried out for 100 ns.Communicated by Ramaswamy H. Sarma.

From Protein Film Electrochemistry to Nanoconfined Enzyme Cascades and the Electrochemical Leaf

Protein film electrochemistry (PFE) has given unrivalled insight into the properties of redox proteins and many electron-transferring enzymes, allowing investigations of otherwise ill-defined or intractable topics such as unstable Fe-S centers and the catalytic bias of enzymes. Many enzymes have been established to be reversible electrocatalysts when attached to an electrode, and further investigations have revealed how unusual dependences of catalytic rates on electrode potential have stark similarities with electronics. A special case, the reversible electrochemistry of a photosynthetic enzyme, ferredoxin-NADP⁺ reductase (FNR), loaded at very high concentrations in the 3D nanopores of a conducting metal oxide layer, is leading to a new technology that brings PFE to myriad enzymes of other classes, the activities of which become controlled by the primary electron exchange. This extension is possible because FNR-based recycling of NADP(H) can be coupled to a dehydrogenase, and thence to other enzymes linked in tandem by the tight channelling of cofactors and intermediates within the nanopores of the material. The earlier interpretations of catalytic wave-shapes and various analogies with electronics are thus extended to initiate a field perhaps aptly named "cascade-tronics", in which the flow of reactions along an enzyme cascade is monitored and controlled through an electrochemical analyzer. Unlike in photosynthesis where FNR transduces electron transfer and hydride transfer through the unidirectional recycling of NADPH, the "electrochemical leaf" (e-Leaf) can be used to drive reactions in both oxidizing and reducing directions. The e-Leaf offers a natural way to study how enzymes are affected by nanoconfinement and crowding, mimicking the physical conditions under which enzyme cascades operate in living cells. The reactions of the trapped enzymes, often at very high local concentration, are thus studied electrochemically, exploiting the potential domain to control rates and direction and the current-rate analogy to derive kinetic data. Localized NADP(H) recycling is very efficient, resulting in very high cofactor turnover numbers and new opportunities for controlling and exploiting biocatalysis.

Asparagus Fructans as Emerging Prebiotics

Commercial fructans (inulin and oligofructose) are generally obtained from crops such as chicory, Jerusalem artichoke or agave. However, there are agricultural by-products, namely asparagus roots, which could be considered potential sources of fructans. In this work, the fructans extracted from asparagus roots and three commercial ones from chicory and agave were studied in order to compare their composition, physicochemical characteristics, and potential health effects. Asparagus fructans had similar chemical composition to the others, especially in moisture, simple sugars and total fructan contents. However, its contents of ash, protein and phenolic compounds were higher. FTIR analysis confirmed these differences in composition. Orafti^®GR showed the highest degree of polymerization (DP) of up to 40, with asparagus fructans (up to 25) falling between Orafti^®GR and the others (DP 10-11). Although asparagus fructan powder had a lower fructan content and lower DP than Orafti^®GR, its viscosity was higher, probably due to the presence of proteins. The existence of phenolic compounds lent antioxidant activity to asparagus fructans. The prebiotic activity in vitro of the four samples was similar and, in preliminary assays, asparagus fructan extract presented health effects related to infertility and diabetes diseases. All these characteristics confer a great potential for asparagus fructans to be included in the prebiotics market.

Advanced Formulations/Drug Delivery Systems for Subcutaneous Delivery of Protein-Based Biotherapeutics

Multiple advanced formulations and drug delivery systems (DDSs) have been developed to deliver protein-based biotherapeutics via the subcutaneous (SC) route. These formulations/DDSs include high-concentration solution, co-formulation of two or more proteins, large volume injection, protein cluster/complex, suspension, nanoparticle, microparticle, and hydrogel. These advanced systems provide clinical benefits related to efficacy and safety, but meanwhile, have more complicated formulations and manufacturing processes compared to conventional solution formulations. To develop a fit-for-purpose formulation/DDS for SC delivery, scientists need to consider multiple factors, such as the primary indication, targeted site, immunogenicity, compatibility, biopharmaceutics, patient compliance, etc. Next, they need to develop appropriate formulation (s) and manufacturing processes using the QbD principle and have a control strategy. This paper aims to provide a comprehensive review of advanced formulations/DDSs recently developed for SC delivery of proteins, as well as some knowledge gaps and potential strategies to narrow them through future research.

Insights into the biochemical and biophysical mechanisms mediating the longevity of the transparent optics of the eye lens

In the human eye, a transparent cornea and lens combine to form the "refracton" to focus images on the retina. This requires the refracton to have a high refractive index "n," mediated largely by extracellular collagen fibrils in the corneal stroma and the highly concentrated crystallin proteins in the cytoplasm of the lens fiber cells. Transparency is a result of short-range order in the spatial arrangement of corneal collagen fibrils and lens crystallins, generated in part by post-translational modifications (PTMs). However, while corneal collagen is remodeled continuously and replaced, lens crystallins are very long-lived and are not replaced and so accumulate PTMs over a lifetime. Eventually, a tipping point is reached when protein aggregation results in increased light scatter, inevitably leading to the iconic protein condensation-based disease, age-related cataract (ARC). Cataracts account for 50% of vision impairment worldwide, affecting far more people than other well-known protein aggregation-based diseases. However, because accumulation of crystallin PTMs begins before birth and long before ARC presents, we postulate that the lens protein PTMs contribute to a "cataractogenic load" that not only increases with age but also has protective effects on optical function by stabilizing lens crystallins until a tipping point is reached. In this review, we highlight decades of experimental findings that support the potential for PTMs to be protective during normal development. We hypothesize that ARC is preventable by protecting the biochemical and biophysical properties of lens proteins needed to maintain transparency, refraction, and optical function.

Preparation of arctiin moleculary imprinted polymers with 4-vinylpyridine and Allyl-β-cyclodextrin as binary monomers under molecular crowding conditions

This paper reported a feasible method to prepare molecularly imprinted polymer (MIPs) using 4-vinylpyridine (4-VP) and Allyl-β-cyclodextrin (β-CD) as binary functional monomer in the presence of polystyrene (PS). This is the first time that a surrounding of macromolecular crowding was established to improve the imprinting effect of cyclodextrins as monomer in organic solvents. The morphological and characteristics of the polymers with macromolecular crowding reagents were investigated by scanning electron microscope (SEM), fourier-transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and nitrogen adsorption experiments. The MIPs were synthesized with 4-VP and β-CD as binary functional monomers, a series of experiments were conducted to compare with the control groups. Furthermore, the selectivity of MIP for analogues experiment showed that the β-CD/4-VP MIP has higher specific recognition for arctiin than β-CD/4-VP NIP. A purification method by β-CD/4-VP MIPs coupled with macromolecular crowding reagents was developed for extraction arctiin from Arctium lappa L. In the MIP-SPE process, the optimal washing and eluting reagents are methanol/water (5:5) and methanol/acid (9:1), respectively. When using the β-CD/4-VP MIPs as SPE absorbent, the mean recoveries for arctiin were 87% with purity of 95%. All the results indicate that this synthetic method using 4-VP and β-CD as binary functional monomers in the presence of PS is a promising method for the preparation of selective adsorbents for arctiin analysis in Arctium lappa L.

Influence of Nonspecific Interactions on Protein Associations: Implications for Biochemistry In Vivo

The cellular interior is composed of a variety of microenvironments defined by distinct local compositions and composition-dependent intermolecular interactions. We review the various types of nonspecific interactions between proteins and between proteins and other macromolecules and supramolecular structures that influence the state of association and functional properties of a given protein existing within a particular microenvironment at a particular point in time. The present state of knowledge is summarized, and suggestions for fruitful directions of research are offered. Expected final online publication date for the Annual Review of Biochemistry, Volume 91 is June 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Combined action of chemical chaperones on stability, aggregation and oligomeric state of muscle glycogen phosphorylase b

Chemical chaperones are a class of small molecules, which enhance protein stability, folding, inhibit protein aggregation, and are used for long-term storage of therapeutic proteins. The combined action of chemical chaperones trehalose, betaine and lysine on stability, aggregation and oligomeric state of muscle glycogen phosphorylase b (Phb) has been studied. Dynamic light scattering data indicate that the affinity of trehalose to Phb increased in the presence of betaine or lysine at both stages (stage of nucleation and aggregate growth) of enzyme aggregation at 48 °C, in contrast, the affinity of betaine to the enzyme in the presence of lysine remained practically unchanged. According to differential scanning calorimetry and analytical ultracentrifugation data, the mixture of trehalose and betaine stabilized Phb stronger than either of them in total. Moreover, the destabilizing effect of lysine on the enzyme was almost completely compensated by trehalose and only partially by betaine. The main protective effect of the mixtures of osmolytes and lysine is associated with their influence on the dissociation/denaturation stage, which is the rate-limiting one of Phb aggregation. Thus, a pair of chaperones affects the stability, oligomeric state, and aggregation of Phb differently than individual chaperones.

Sustained enzymatic activity and flow in crowded protein droplets

Living cells harvest energy from their environments to drive the chemical processes that enable life. We introduce a minimal system that operates at similar protein concentrations, metabolic densities, and length scales as living cells. This approach takes advantage of the tendency of phase-separated protein droplets to strongly partition enzymes, while presenting minimal barriers to transport of small molecules across their interface. By dispersing these microreactors in a reservoir of substrate-loaded buffer, we achieve steady states at metabolic densities that match those of the hungriest microorganisms. We further demonstrate the formation of steady pH gradients, capable of driving microscopic flows. Our approach enables the investigation of the function of diverse enzymes in environments that mimic cytoplasm, and provides a flexible platform for studying the collective behavior of matter driven far from equilibrium.

Macromolecular crowding effects on electrostatic binding affinity: Fundamental insights from theoretical, idealized models

The crowded cellular environment can affect biomolecular binding energetics, with specific effects depending on the properties of the binding partners and the local environment. Often, crowding effects on binding are studied on particular complexes, which provide system-specific insights but may not provide comprehensive trends or a generalized framework to better understand how crowding affects energetics involved in molecular recognition. Here, we use theoretical, idealized molecules whose physical properties can be systematically varied along with samplings of crowder placements to understand how electrostatic binding energetics are altered through crowding and how these effects depend on the charge distribution, shape, and size of the binding partners or crowders. We focus on electrostatic binding energetics using a continuum electrostatic framework to understand effects due to depletion of a polar, aqueous solvent in a crowded environment. We find that crowding effects can depend predictably on a system's charge distribution, with coupling between the crowder size and the geometry of the partners' binding interface in determining crowder effects. We also explore the effect of crowder charge on binding interactions as a function of the monopoles of the system components. Finally, we find that modeling crowding via a lowered solvent dielectric constant cannot account for certain electrostatic crowding effects due to the finite size, shape, or placement of system components. This study, which comprehensively examines solvent depletion effects due to crowding, complements work focusing on other crowding aspects to help build a holistic understanding of environmental impacts on molecular recognition.

Understanding enzyme behavior in a crowded scenario through modulation in activity, conformation and dynamics

Macromolecular crowding, inside the physiological interior, modulates the energy landscape of biological macromolecules in multiple ways. Amongst these, enzymes occupy a special place and hence understanding the function of the same in the crowded interior is of utmost importance. In this study, we have investigated the manner in which the multidomain enzyme, AK3L1 (PDB ID: 1ZD8), an isoform of adenylate kinase, has its features affected in presence of commonly used crowders (PEG 8, Dextran 40, Dextran 70, and Ficoll 70). Michaelis Menten plots reveal that the crowders in general enhance the activity of the enzyme, with the K_m and V_max values showing significant variations. Ficoll 70, induced the maximum activity for AK3L1 at 100 g/L, beyond which the activity reduced. Ensemble FRET studies were performed to provide insights into the relative domain (LID and CORE) displacements in presence of the crowders. Solvation studies reveal that the protein matrix surrounding the probe CPM (7-diethylamino-3-(4-maleimido-phenyl)-4-methylcoumarin) gets restricted in presence of the crowders, with Ficoll 70 providing the maximum rigidity, the same being linked to the decrease in the activity of the enzyme. Through our multipronged approach, we have observed a distinct correlation between domain displacement, enzyme activity and associated dynamics. Thus, keeping in mind the complex nature of enzyme activity and the surrounding bath of dense soup that the biological entity remains immersed in, indeed more such approaches need to be undertaken to have a better grasp of the "enzymes in the crowd".

Inhalable Protein Powder Prepared by Spray-Freeze-Drying Using Hydroxypropyl-β-Cyclodextrin as Excipient

The prospect of inhaled biologics has garnered particular interest given the benefits of the pulmonary route of administration. Pertinent considerations in producing inhalable dry powders containing biological medicines relate to aerosol performance and protein stability. Spray-freeze-drying (SFD) has emerged as an established method to generate microparticles that can potentially be deposited in the lungs. Here, the SFD conditions and formulation composition were evaluated using bovine serum albumin (BSA) as a model protein and 2-hydroxypropyl-beta-cyclodextrin (HPβCD) as the protein stabilizer. A factorial design analysis was performed to investigate the effects of BSA content, solute concentration of feed solution, and atomization gas flow rate on dispersibility (as an emitted fraction), respirability (as fine particle fraction), particle size, and level of protein aggregation. The atomization gas flow rate was identified as a significant factor in influencing the aerosol performance of the powder formulations and protein aggregation. Nonetheless, high atomization gas flow rate induced aggregation, highlighting the need to further optimize the formulation. Of note, all the formulations exhibited excellent dispersibility, while no fragmentation of BSA occurred, indicating the feasibility of SFD and the promise of HPβCD as an excipient.

Amyloid Self-Assembly of Lysozyme in Self-Crowded Conditions: The Formation of a Protein Oligomer Hydrogel

A method is designed to quickly form protein hydrogels, based on the self-assembly of highly concentrated lysozyme solutions in acidic conditions. Their properties can be easily modulated by selecting the curing temperature. Molecular insights on the gelation pathway, derived by in situ FTIR spectroscopy, are related to calorimetric and rheological results, providing a consistent picture on structure–property correlations. In these self-crowded samples, the thermal unfolding induces the rapid formation of amyloid aggregates, leading to temperature-dependent quasi-stationary levels of antiparallel cross β-sheet links, attributed to kinetically trapped oligomers. Upon subsequent cooling, thermoreversible hydrogels develop by the formation of interoligomer contacts. Through heating/cooling cycles, the starting solutions can be largely recovered back, due to oligomer-to-monomer dissociation and refolding. Overall, transparent protein hydrogels can be easily formed in self-crowding conditions and their properties explained, considering the formation of interconnected amyloid oligomers. This type of biomaterial might be relevant in different fields, along with analogous systems of a fibrillar nature more commonly considered.

Response to crowded conditions reveals compact nucleus for amyloid formation of folded protein

Although the consequences of the crowded cell environments may affect protein folding, function and misfolding reactions, these processes are often studied in dilute solutions in vitro. We here used biophysical experiments to investigate the amyloid fibril formation process of the fish protein apo-β-parvalbumin in solvent conditions that mimic steric and solvation aspects of the in vivo milieu. Apo-β-parvalbumin is a folded protein that readily adopts an amyloid state via a nucleation–elongation mechanism. Aggregation experiments in the presence of macromolecular crowding agents (probing excluded volume, entropic effects) as well as small molecule osmolytes (probing solvation, enthalpic effects) revealed that both types of agents accelerate overall amyloid formation, but the elongation step was faster with macromolecular crowding agents but slower in the presence of osmolytes. The observations can be explained by the steric effects of excluded volume favoring assembled states and that amyloid nucleation does not involve monomer unfolding. In contrast, the solvation effects due to osmolyte presence promote nucleation but not elongation. Therefore, the amyloid-competent nuclei must be compact with less osmolytes excluded from the surface than either the folded monomers or amyloid fibers. We conclude that, in contrast to other amyloidogenic folded proteins, amyloid formation of apo-β-parvalbumin is accelerated by crowded cell-like conditions due to a nucleation process that does not involve large-scale protein unfolding.

Product-Specific Impact of Viscosity Modulating Formulation Excipients During Ultra-High Concentration Biotherapeutics Drug Product Development

Developing ultra-high concentration biotherapeutics drug products can be challenging due to increased viscosity, processing, and stability issues. Excipients used to alleviate these concerns are traditionally evaluated at lower protein concentrations. This study investigates whether classically known modulators of stability and viscosity at low (<50 mg/mL) to high (>50 - 150 mg/mL) protein concentrations are beneficial in ultra-high (>150 mg/mL) concentration protein formulations and drug products. This study evaluates the effect of arginine monohydrochloride, proline, and lysine monohydrochloride on viscosity and concentratability at different high and ultra-high protein concentrations using a monoclonal antibody, mAbN, formulation as a candidate protein system. The effect of excipients on the viscosity and concentratability (rate and extent) was different at high versus ultra-high protein concentrations. These results highlight that classical excipients in literature known to modulate protein interactions at low protein concentrations and reduce viscosity at high protein concentrations may need to be evaluated at target protein concentrations in a product-specific manner while developing ultra-high concentration biologics drug products.

The extent of protein hydration dictates the preference for heterogeneous or homogeneous nucleation generating either parallel or antiparallel β-sheet α-synuclein aggregates

α-Synuclein amyloid self-assembly is the hallmark of a number of neurodegenerative disorders, including Parkinson's disease, although there is still very limited understanding about the factors and mechanisms that trigger this process. Primary nucleation has been observed to be initiated in vitro at hydrophobic/hydrophilic interfaces by heterogeneous nucleation generating parallel β-sheet aggregates, although no such interfaces have yet been identified in vivo. In this work, we have discovered that α-synuclein can self-assemble into amyloid aggregates by homogeneous nucleation, without the need of an active surface, and with a preference for an antiparallel β-sheet arrangement. This particular structure has been previously proposed to be distinctive of stable toxic oligomers and we here demonstrate that it indeed represents the most stable structure of the preferred amyloid pathway triggered by homogeneous nucleation under limited hydration conditions, including those encountered inside α-synuclein droplets generated by liquid-liquid phase separation. In addition, our results highlight the key role that water plays not only in modulating the transition free energy of amyloid nucleation, and thus governing the initiation of the process, but also in dictating the type of preferred primary nucleation and the type of amyloid polymorph generated depending on the extent of protein hydration. These findings are particularly relevant in the context of in vivo α-synuclein aggregation where the protein can encounter a variety of hydration conditions in different cellular microenvironments, including the vicinity of lipid membranes or the interior of membraneless compartments, which could lead to the formation of remarkably different amyloid polymorphs by either heterogeneous or homogeneous nucleation.

The Aggregation of αB-Crystallin under Crowding Conditions Is Prevented by αA-Crystallin: Implications for α-Crystallin Stability and Lens Transparency

One of the most crowded biological environments is the eye lens which contains a high concentration of crystallin proteins. The molecular chaperones αB-crystallin (αBc) with its lens partner αA-crystallin (αAc) prevent deleterious crystallin aggregation and cataract formation. However, some forms of cataract are associated with structural alteration and dysfunction of αBc. While many studies have investigated the structure and function of αBc under dilute in vitro conditions, the effect of crowding on these aspects is not well understood despite its in vivo relevance. The structure and chaperone ability of αBc under conditions that mimic the crowded lens environment were investigated using the polysaccharide Ficoll 400 and bovine γ-crystallin as crowding agents and a variety of biophysical methods, principally contrast variation small-angle neutron scattering. Under crowding conditions, αBc unfolds, increases its size/oligomeric state, decreases its thermal stability and chaperone ability, and forms kinetically distinct amorphous and fibrillar aggregates. However, the presence of αAc stabilizes αBc against aggregation. These observations provide a rationale, at the molecular level, for the aggregation of αBc in the crowded lens, a process that exhibits structural and functional similarities to the aggregation of cataract-associated αBc mutants R120G and D109A under dilute conditions. Strategies that maintain or restore αBc stability, as αAc does, may provide therapeutic avenues for the treatment of cataract.

Crosstalk Between Alpha-Synuclein and Other Human and Non-Human Amyloidogenic Proteins: Consequences for Amyloid Formation in Parkinson's Disease

It was recently shown (Sampson et al., Elife9, 2020) that an amyloidogenic protein, CsgA, present in E. coli biofilms in the gut can trigger Parkinson's disease in mice. This study emphasizes the possible role of the gut microbiome in modulation (and even initiation) of human neurodegenerative disorders, such as Parkinson's disease. As the CsgA protein was found to accelerate alpha-synuclein (the key amyloidogenic protein in Parkinson's disease) amyloid formation in vitro, this result suggests that also other amyloidogenic proteins from gut bacteria, and even from the diet (such as stable allergenic proteins), may be able to affect human protein conformations and thereby modulate amyloid-related diseases. In this review, we summarize what has been reported in terms of in vitro cross-reactivity studies between alpha-synuclein and other amyloidogenic human and non-human proteins. It becomes clear from the limited data that exist that there is a fine line between acceleration and inhibition, but that cross-reactivity is widespread, and it is more common for other proteins (among the studied cases) to accelerate alpha-synuclein amyloid formation than to block it. It is of high importance to expand investigations of cross-reactivity between amyloidogenic proteins to both reveal underlying mechanisms and links between human diseases, as well as to develop new treatments that may be based on an altered gut microbiome.

Carbohydrate-Based Macromolecular Crowding-Induced Stabilization of Proteins: Towards Understanding the Significance of the Size of the Crowder

There are a large number of biomolecules that are accountable for the extremely crowded intracellular environment, which is totally different from the dilute solutions, i.e., the idealized conditions. Such crowded environment due to the presence of macromolecules of different sizes, shapes, and composition governs the level of crowding inside a cell. Thus, we investigated the effect of different sizes and shapes of crowders (ficoll 70, dextran 70, and dextran 40), which are polysaccharide in nature, on the thermodynamic stability, structure, and functional activity of two model proteins using UV-Vis spectroscopy and circular dichroism techniques. We observed that (a) the extent of stabilization of α-lactalbumin and lysozyme increases with the increasing concentration of the crowding agents due to the excluded volume effect and the small-sized and rod-shaped crowder, i.e., dextran 40 resulted in greater stabilization of both proteins than dextran 70 and ficoll 70; (b) structure of both the proteins remains unperturbed; and (c) enzymatic activity of lysozyme decreases with the increasing concentration of the crowder.

Folding of copper proteins: role of the metal?

Copper is a redox-active transition metal ion required for the function of many essential human proteins. For biosynthesis of proteins coordinating copper, the metal may bind before, during or after folding of the polypeptide. If the metal binds to unfolded or partially folded structures of the protein, such coordination may modulate the folding reaction. The molecular understanding of how copper is incorporated into proteins requires descriptions of chemical, thermodynamic, kinetic and structural parameters involved in the formation of protein-metal complexes. Because free copper ions are toxic, living systems have elaborate copper-transport systems that include particular proteins that facilitate efficient and specific delivery of copper ions to target proteins. Therefore, these pathways become an integral part of copper protein folding in vivo. This review summarizes biophysical-molecular in vitro work assessing the role of copper in folding and stability of copper-binding proteins as well as protein-protein copper exchange reactions between human copper transport proteins. We also describe some recent findings about the participation of copper ions and copper proteins in protein misfolding and aggregation reactions in vitro.

A Molecular Sensor Reveals Differences in Macromolecular Crowding between the Cytoplasm and Nucleoplasm

We describe a molecular sensor that reports, using fluorescence resonance energy transfer (FRET), on the degree of macromolecular crowding in different cellular compartments. The oligonucleotide-based sensor is sensitive to changes in the volume fraction of macromolecules over a wide range in vitro and, when introduced in cells, rapidly distributes and shows a striking contrast between the cytosol and the nucleus. This contrast can be modulated by osmotic stress or by using a number of drugs that alter chromatin organization within the nucleus. These findings suggest that the sensor can be used as a tool to probe chromosome organization. Further, our finding that the cell maintains different degrees of macromolecular crowding in the cytoplasm and nucleoplasm has implications on molecular mechanisms since crowding can alter protein conformations, binding rates, reaction kinetics, and therefore protein function.

Isotonic concentrations of excipients control the dimerization rate of a therapeutic immunoglobulin G1 antibody during refrigerated storage based on their rank order of native-state interaction

Inert co-solutes, or excipients, are often included in protein biologic formulations to adjust the tonicity of liquid dosage forms intended for subcutaneous delivery. Despite the low concentration of their use, many of these excipients alter protein-protein interactions such as dimerization and aggregation rates of high concentration monoclonal antibody (mAb) therapeutics to varying extents during long-term refrigerated clinical storage, challenging the formulation scientist to make informed excipient selections at the earliest stages of development when protein supply and time are often limited. The objectives of this study were to better understand how isotonic concentrations of excipients influence the dimerization rates of a model mAb stored at refrigerated and room temperatures and explore protein sparing biophysical methods capable of predicting this dependence. Despite their prevalence of use in the biopharmaceutical industry, methods for assessing conformational stability such differential scanning calorimetry and isothermal equilibrium unfolding showed little predictive power and we highlight some of the assumptions and technical challenges of their use with mAbs. Conversely, measures of colloidal stability of the native-state such as preferential interaction coefficients measured by vapor pressure osmometry and solubility assessed by polyethylene-glycol induced precipitation correlated reasonably well with the mAb dimerization data and are most consistent with the excipients tested minimizing dimerization by interacting favorably with the residues comprising the protein-protein association interface.

[PIN+]ing down the mechanism of prion appearance

Prions are conformationally flexible proteins capable of adopting a native state and a spectrum of alternative states associated with a change in the function of the protein. These alternative states are prone to assemble into amyloid aggregates, which provide a structure for self-replication and transmission of the underlying conformer and thereby the emergence of a new phenotype. Amyloid appearance is a rare event in vivo, regulated by both the aggregation propensity of prion proteins and their cellular environment. How these forces normally intersect to suppress amyloid appearance and the ways in which these restrictions can be bypassed to create protein-only phenotypes remain poorly understood. The most widely studied and perhaps most experimentally tractable system to explore the mechanisms regulating amyloid appearance is the [PIN⁺] prion of Saccharomyces cerevisiae. [PIN⁺] is required for the appearance of the amyloid state for both native yeast proteins and for human proteins expressed in yeast. These observations suggest that [PIN⁺] facilitates the bypass of amyloid regulatory mechanisms by other proteins in vivo. Several models of prion appearance are compatible with current observations, highlighting the complexity of the process and the questions that must be resolved to gain greater insight into the mechanisms regulating these events.

Polydispersity and negative charge are key modulators of extracellular matrix deposition under macromolecular crowding conditions

Macromolecular crowding is a biophysical phenomenon that stems from the volume excluded by macromolecules, as they undergo steric repulsion and electrostatic interactions. The excluded volume depends on the shape, size, charge and polydispersity of the molecules. Although theoretical/computational models have been used to assess the influence of macromolecular crowding in biological media, real-time experiments are scarce. Herein, we evaluated the influence of hydrodynamic radius, charge and polydispersity of (a) various concentrations of different crowders (carrageenan, Ficoll™ and dextran sulphate); (b) various molecular weights of different crowders (70, 400 and 100 kDa of Ficoll™ and 10, 100 and 500 kDa of dextran sulphate) and (c) various cocktails of the same crowders (cocktails of various concentrations of different molecular weights Ficoll™ and dextran sulphate) on extracellular matrix deposition in human dermal fibroblast culture. The use of crowding cocktails with different molecular weight/concentrations of Ficoll™ or dextran sulphate molecules led to increased polydispersity and enhanced collagen type I deposition in comparison to their mono-domain counterparts. Carrageenan, however, induced the highest deposition of collagen type I due to its negative charge and inherent polydispersity. Our data contribute to a better understanding of the influence of the biophysical properties of the crowders on extracellular matrix deposition in vitro. STATEMENT OF SIGNIFICANCE: Macromolecular crowding is a biophysical phenomenon that accelerates and enhances extracellular matrix deposition in cell culture systems. Herein, we demonstrate that negatively charged and polydispersed macromolecules or cocktails of macromolecules, as opposed to neutral and monodomain macromolecules, induce highest extracellular matrix deposition in human dermal fibroblast cultures.

Macromolecular crowding effects on energy transfer efficiency and donor-acceptor distance of hetero-FRET sensors using time-resolved fluorescence

Living cells are crowded with macromolecules and organelles, which affect a myriad of biochemical processes. As a result, there is a need for sensitive molecular sensors for quantitative, site-specific assessment of macromolecular crowding. Here, we investigated the excited-state dynamics of recently developed hetero-FRET sensors (mCerulean3-linker-mCitrine) in homogeneous and heterogeneous environments using time-resolved fluorescence measurements, which are compatible with fluorescence lifetime imaging microscopy (FLIM). The linker in these FRET constructs, which tether the mCerulean3 (the donor) and mCitrine (the acceptor), vary in both length and flexibility. Glycerol and Ficoll-70 solutions were used for homogeneous and heterogeneous environments, respectively, at variable concentrations. The wavelength-dependent studies suggest that the 425-nm excitation and the 475-nm emission of the donor are best suited for quantitative assessment of the energy transfer efficiency and the donor-acceptor distance of these FRET probes. Under the same experimental conditions, the enzymatically cleaved counterpart of these probes was used as a control as well as a means to account for the changes in the environmental refractive indices. Our results indicate that the energy transfer efficiency of these FRET probes increases as the linker becomes shorter and more flexible in pure buffer at room temperature. In addition, the FRET probes favor a compact structure with enhanced energy transfer efficiency and a shorter donor-acceptor distance in the heterogeneous, polymer-crowded environment due to steric hindrance. In contrast, the stretched conformation of these FRET probes is more favorable in the viscous, homogeneous environment with a reduced energy transfer efficiency and relatively larger donor-acceptor distance as compared with those in pure buffer, which was attributed to a reduced structural fluctuation of the mCerulean3-mCitrine FRET pair in the viscous, more restrictive glycerol-enriched buffer. Our findings will help to advance the potential of these hetero-FRET probes using FLIM for spatio-temporal assessment of the compartmentalized crowding in living cells.

Effect of the geometry of confining media on the stability and folding rate of α -helix proteins

Protein folding in confined media has attracted wide attention over the past 15 years due to its importance to both in vivo and in vitro applications. It is generally believed that protein stability increases by decreasing the size of the confining medium, if the medium's walls are repulsive, and that the maximum folding temperature in confinement is in a pore whose size D ₀ is only slightly larger than the smallest dimension of a protein's folded state. Until recently, the stability of proteins in pores with a size very close to that of the folded state has not received the attention it deserves. In a previous paper [L. Javidpour and M. Sahimi, J. Chem. Phys. 135, 125101 (2011)], we showed that, contrary to the current theoretical predictions, the maximum folding temperature occurs in larger pores for smaller α-helices. Moreover, in very tight pores, the free energy surface becomes rough, giving rise to a new barrier for protein folding close to the unfolded state. In contrast to unbounded domains, in small nanopores proteins with an α-helical native state that contain the β structures are entropically stabilized implying that folding rates decrease notably and that the free energy surface becomes rougher. In view of the potential significance of such results to interpretation of many sets of experimental data that could not be explained by the current theories, particularly the reported anomalously low rates of folding and the importance of entropic effects on proteins' misfolded states in highly confined environments, we address the following question in the present paper: To what extent the geometry of a confined medium affects the stability and folding rates of proteins? Using millisecond-long molecular dynamics simulations, we study the problem in three types of confining media, namely, cylindrical and slit pores and spherical cavities. Most importantly, we find that the prediction of the previous theories that the dependence of the maximum folding temperature T _f on the size D of a confined medium occurs in larger media for larger proteins is correct only in spherical geometry, whereas the opposite is true in the two other geometries that we study. Also studied is the effect of the strength of the interaction between the confined media's walls and the proteins. If the walls are only weakly or moderately attractive, a complex behavior emerges that depends on the size of the confining medium.

Conformational analysis of Pneumococcal Surface Antigen A (PsaA) upon zinc binding by fluorescence spectroscopy

PsaA (pneumococcal surface antigen A) is a S. pneumoniae virulence factor that belongs to the metal transport system. The Manganese PsaA binding has been associated with oxidative stress resistance becoming a pivotal element in the bacteria virulence. It has been shown that Zinc inhibits the Manganese acquisition and promotes bacteria toxicity. We have performed a PsaA conformational analysis both in the presence (Zn-rPsaA) and in the absence of Zinc (free-rPsaA). We performed experiments in the presence of different Zinc concentrations to determine the metal minimum concentration which induced a conformational change. The protein in free and Zn-binding condition was also studied in pH ranging 2.6-8.0 and in temperature ranging 25oC-85oC. pH experiments showed a decrease of fluorescence intensity only in acidic medium. Analysis of the heat-induced denaturation demonstrated that Zinc-binding promoted an increase in melting temperature from 55oC (free-rPsaA) to 78.8oC (Zn-rPsaA) according to fluorescence measurements. In addition, the rPsaA stabilization by Zinc was verified through analysis of urea and guanidine hydrochloride denaturation. Data showed that Zinc promoted an increase in the rPsaA stability and its removal by EDTA can lead to a PsaA intermediate conformation. These findings can be considered in the development of vaccines containing PsaA as antigen.