Liposomes Coated with Chitosan–Xanthan Gum (Chitosomes) as Potential Carriers for Pulmonary Delivery of Rifampicin

Biomaterial therapeutic strategies for treatment of bacterial lung infections

Bacterial infections of the lung frequently occur as a secondary infection to many respiratory viral infections and conditions, including influenza, COVID-19, chronic obstructive pulmonary disease (COPD), and cystic fibrosis (CF). Currently, clinical standard treats bacterial infections of the lung with antibiotic drugs. However, the use of broad-spectrum antibiotics can disrupt host microbiomes, lead to patient discomfort, and current clinical settings face the constantly increasing threat of drug-resistant bacteria. Biofilms further obstruct effective treatment due to their protective matrix layer, which shields bacteria from both the host immune system and antimicrobial drugs and subsequently promotes drug resistance. Alternative antimicrobial agents, including bacteriophages and antimicrobial peptides, have been utilized to treat drug-resistant bacteria. However, these antimicrobial agents have significant limitations pertaining to their ability to arrive at infection sites without compromised function and ability to persist over an extended period to fully treat infections. Enhanced delivery strategies present great promise in addressing these issues by using micro/nanoparticle carriers that shield antimicrobial agents in transit and result in sustained release, enhancing subsequent therapeutic effect and can even be modulated to be multi-functional to further improve recovery following bacterial infection.

In Vitro Evaluation of Aerosol Therapy with Pentamidine-Loaded Liposomes Coated with Chondroitin Sulfate or Heparin for the Treatment of Leishmaniasis

The second-line antileishmanial compound pentamidine is administered intramuscularly or, preferably, by intravenous infusion, with its use limited by severe adverse effects, including diabetes, severe hypoglycemia, myocarditis and renal toxicity. We sought to test the potential of phospholipid vesicles to improve the patient compliance and efficacy of this drug for the treatment of leishmaniasis by means of aerosol therapy. The targeting to macrophages of pentamidine-loaded liposomes coated with chondroitin sulfate or heparin increased about twofold (up to ca. 90%) relative to noncoated liposomes. The encapsulation of pentamidine in liposomes ameliorated its activity on the amastigote and promastigote forms of Leishmania infantum and Leishmania pifanoi, and it significantly reduced cytotoxicity on human umbilical endothelial cells, for which the concentration inhibiting 50% of cell viability was 144.2 ± 12.7 µM for pentamidine-containing heparin-coated liposomes vs. 59.3 ± 4.9 µM for free pentamidine. The deposition of liposome dispersions after nebulization was evaluated with the Next Generation Impactor, which mimics human airways. Approximately 53% of total initial pentamidine in solution reached the deeper stages of the impactor, with a median aerodynamic diameter of ~2.8 µm, supporting a partial deposition on the lung alveoli. Upon loading pentamidine in phospholipid vesicles, its deposition in the deeper stages significantly increased up to ~68%, and the median aerodynamic diameter decreased to a range between 1.4 and 1.8 µm, suggesting a better aptitude to reach the deeper lung airways in higher amounts. In all, nebulization of liposome-encapsulated pentamidine improved the bioavailability of this neglected drug by a patient-friendly delivery route amenable to self-administration, paving the way for the treatment of leishmaniasis and other infections where pentamidine is active.

Design and in vitro effectiveness evaluation of Echium amoenum extract loaded in bioadhesive phospholipid vesicles tailored for mucosal delivery

The Echium amoenum Fisch. and C.A. Mey. (E. amoenum) is an herb native from Iranian shrub, and its blue-violet flowers are traditionally used as medical plants. In the present study, an antioxidant phytocomplex was extracted from the flowers of E. amoenum by ultrasounds-assisted hydroalcoholic maceration. The main components, contained in the extract, have been detected using HPLC-DAD, and rosmarinic acid was found to be the most abundant. The antioxidant power of the extract along with the phenolic content were measured using colorimetric assays. The extract was loaded in liposomes, which were enriched adding different bioadhesive polymers (i.e., mucin, xanthan gum and carboxymethyl cellulose sodium salt) individually or in combination. The main physico-chemical properties (i.e. size, size distribution, surface charge) of the prepared vesicles were measured as well as their stability on storage. The viscosity of dispersion and the ability of vesicles to interact with mucus were evaluated measuring their stability in a mucin dispersion and mobility in a mucin film. The biocompatibility and the ability of the formulations to protect keratinocytes from damages caused by hydrogen peroxide and to promote the cell migration were measured in vitro.

Nanostructures for drug delivery in respiratory diseases therapeutics: Revision of current trends and its comparative analysis

Respiratory diseases are leading causes of death and disability in developing and developed countries. The burden of acute and chronic respiratory diseases has been rising throughout the world and represents a major problem in the public health system. Acute respiratory diseases include pneumonia, influenza, SARS-CoV-2 and MERS viral infections; while chronic obstructive pulmonary disease (COPD), asthma and, occupational lung diseases (asbestosis, pneumoconiosis) and other parenchymal lung diseases namely lung cancer and tuberculosis are examples of chronic respiratory diseases. Importantly, chronic respiratory diseases are not curable and treatments for acute pathologies are particularly challenging. For that reason, the integration of nanotechnology to existing drugs or for the development of new treatments potentially benefits the therapeutic goals by making drugs more effective and exhibit fewer undesirable side effects to treat these conditions. Moreover, the integration of different nanostructures enables improvement of drug bioavailability, transport and delivery compared to stand-alone drugs in traditional respiratory therapy. Notably, there has been great progress in translating nanotechnology-based cancer therapies and diagnostics into the clinic; however, researchers in recent years have focused on the application of nanostructures in other relevant pulmonary diseases as revealed in our database search. Furthermore, polymeric nanoparticles and micelles are the most studied nanostructures in a wide range of diseases; however, liposomal nanostructures are recognized to be some of the most successful commercial drug delivery systems. In conclusion, this review presents an overview of the recent and relevant research in drug delivery systems for the treatment of different pulmonary diseases and outlines the trends, limitations, importance and application of nanomedicine technology in treatment and diagnosis and future work in this field.

Pelargonidin-3-O-Glucoside Encapsulated Pectin-Chitosan-Nanoliposomes Recovers Palmitic Acid-Induced Hepatocytes Injury

Pelargonidin-3-O-glucoside (Pg) is a well-known anthocyanin derivative possessing potential biological activity. Nonetheless, the bioactivity of Pg is limited due to instability in the physiological environment. Functionalized nanoliposomes using chitosan and/or pectin coating is an excellent carrier system for nanoencapsulation of food bioactive compounds such as Pg. Therefore, this study aimed to investigate the protective effect of Pg-loaded pectin–chitosan coated nanoliposomes against palmitic acid (PA)-induced hepatocytes injury in L02 cells. Firstly, Pg-loaded pectin–chitosan coated nanoliposomes were characterized using the DLS, HPLC, TEM, and cellular uptake study in L02 cells. Thereafter, we assayed the protective effect against PA-induced lipotoxicity, ROS and O₂^•− generation, mitochondrial dysfunction (MMP), and GSH depletion. Results showed that Pg-loaded nanoliposomes significantly reduced the PA-induced L02 cells toxicity via suppressing ROS production, O₂^•− generation, MMP collapse, and GSH reduction, whereas the free-Pg samples were not effective. On the contrary, the chitosan and/or pectin coated nanoliposomes showed higher results compared to coating-free nanoliposomes. Altogether, the results of our study ensured that Pg-loaded pectin–chitosan coated nanoliposomes was capable of reducing PA-induced hepatocytes injury. Thus, pectin–chitosan coated nanoliposomes can be useful for hepatocellular delivery of hydrophilic compounds with greater biological activity.

Liposome-polymer complex for drug delivery system and vaccine stabilization

Liposomes have been used extensively as micro- and nanocarriers for hydrophobic or hydrophilic molecules. However, conventional liposomes are biodegradable and quickly eliminated, making it difficult to be used for delivery in specific routes, such as the oral and systemic routes. One way to overcome this problem is through complexation with polymers, which is referred to as a liposome complex. The use of polymers can increase the stability of liposome with regard to pH, chemicals, enzymes, and the immune system. In some cases, specific polymers can condition the properties of liposomes to be explicitly used in drug delivery, such as targeted delivery and controlled release. These properties are influenced by the type of polymer, crosslinker, interaction, and bond in the complexation process. Therefore, it is crucial to study and review these parameters for the development of more optimal forms and properties of the liposome complex. This article discusses the use of natural and synthetic polymers, ways of interaction between polymers and liposomes (on the surface, incorporation in lamellar chains, and within liposomes), types of bonds, evaluation standards, and their effects on the stability and pharmacokinetic profile of the liposome complex, drugs, and vaccines. This article concludes that both natural and synthetic polymers can be used in modifying the structure and physicochemical properties of liposomes to specify their use in targeted delivery, controlled release, and stabilizing drugs and vaccines.

Airway Delivery of Hydrogel-Encapsulated Niclosamide for the Treatment of Inflammatory Airway Disease

Repurposing of the anthelminthic drug niclosamide was proposed as an effective treatment for inflammatory airway diseases such as asthma, cystic fibrosis, and chronic obstructive pulmonary disease. Niclosamide may also be effective for the treatment of viral respiratory infections, such as SARS-CoV-2, respiratory syncytial virus, and influenza. While systemic application of niclosamide may lead to unwanted side effects, local administration via aerosol may circumvent these problems, particularly when the drug is encapsulated into small polyethylene glycol (PEG) hydrospheres. In the present study, we examined whether PEG-encapsulated niclosamide inhibits the production of mucus and affects the pro-inflammatory mediator CLCA1 in mouse airways in vivo, while effects on mucociliary clearance were assessed in excised mouse tracheas. The potential of encapsulated niclosamide to inhibit TMEM16A whole-cell Cl- currents and intracellular Ca2+ signalling was assessed in airway epithelial cells in vitro. We achieved encapsulation of niclosamide in PEG-microspheres and PEG-nanospheres (Niclo-spheres). When applied to asthmatic mice via intratracheal instillation, Niclo-spheres strongly attenuated overproduction of mucus, inhibited secretion of the major proinflammatory mediator CLCA1, and improved mucociliary clearance in tracheas ex vivo. These effects were comparable for niclosamide encapsulated in PEG-nanospheres and PEG-microspheres. Niclo-spheres inhibited the Ca2+ activated Cl- channel TMEM16A and attenuated mucus production in CFBE and Calu-3 human airway epithelial cells. Both inhibitory effects were explained by a pronounced inhibition of intracellular Ca2+ signals. The data indicate that poorly dissolvable compounds such as niclosamide can be encapsulated in PEG-microspheres/nanospheres and deposited locally on the airway epithelium as encapsulated drugs, which may be advantageous over systemic application.

Nanocarrier-Based Approaches for the Efficient Delivery of Anti-Tubercular Drugs and Vaccines for Management of Tuberculosis

Drug-resistant species of tuberculosis (TB), which spread faster than traditiona TB, is a severely infectious disease. The conventional drug therapy used in the management of tuberculosis has several challenges linked with adverse effects. Hence, nanotherapeutics served as an emerging technique to overcome problems associated with current treatment. Nanotherapeutics helps to overcome toxicity and poor solubility issues of several drugs used in the management of tuberculosis. Due to their diameter and surface chemistry, nanocarriers encapsulated with antimicrobial drugs are readily taken up by macrophages. Macrophages play a crucial role as they serve as target sites for active and passive targeting for nanocarriers. The surface of the nanocarriers is coated with ligand-specific receptors, which further enhances drug concentration locally and indicates the therapeutic potential of nanocarriers. This review highlights tuberculosis's current facts, figures, challenges associated with conventional treatment, different nanocarrier-based systems, and its application in vaccine development.

From process effluents to intestinal health promotion: Developing biopolymer-whey liposomes loaded with gingerol to heal intestinal wounds and neutralize oxidative stress

As a sustainable strategy to valorize the main effluent of the cheese industry and potent environmental pollutant, whey, several biopolymer-whey vesicles loaded with gingerol were tailored for counteracting intestinal oxidative stress and boosting wound healing. An eco-friendly method was used to combine whey with four different water-dispersible biopolymers (xanthan gum, tragacanth, Arabic gum and sodium alginate), phospholipid and a natural antioxidant (gingerol). The results of cryogenic transmission microscopy and dynamic light scattering indicated that the vesicles were mostly unilamellar and small in size (∼100 nm) with low polydispersity index, high negative zeta potential and ability to entrap a high amount of gingerol (up to 94%). The vesicles could maintain their structures in acidic and neutral media and Turbiscan® technology confirmed their stability during the storage. Vesicles prepared with whey and tragacanth exhibited the highest capability to protect intestinal cells from damages induced by hydrogen peroxide. When Arabic and tragacanth gums were added to the whey vesicles, the closure rate of the scratched area was fast and no trace of the wound was observed after 72 h of treatment. These promising findings could open a new horizon in the application of whey in nanomedicine for the treatment of intestinal damages.

An integrative review on the uses of plant-derived bioactives formulated in conventional and innovative dosage forms for the local treatment of damaged nasal cavity

Plants and their derivates have been used as medicines for centuries and today is being re-discovered their usefulness for the human health. The therapeutic properties of phytochemicals are re-evaluated under the light of medical and pharmacological research, pushed by a constantly growing market demand, where consumers trust more natural products than synthetic drugs. New studies are enlightening the effectiveness of phytochemicals against a wide range of ailments, nevertheless very few evaluate the efficacy of topical formulations based on natural bioactive molecules in the treatment of nasal mucosal diseases. This review aims at exploring this little covered topic. An overview on the properties and functionality of the nasal mucosa and the different diseases affecting it has been provided. We summarized various nasal dosage forms containing natural bioactive and explored how innovative delivery systems loading phytochemicals can improve the treatment results. Finally, the potential use of novel nanocarriers for the treatment of nasal ailments has been covered as well.

A Review of Gum Hydrocolloid Polyelectrolyte Complexes (PEC) for Biomedical Applications: Their Properties and Drug Delivery Studies

The utilization of natural gum polysaccharides as the vehicle for drug delivery systems and other biomedical applications has increased in recent decades. Their biocompatibility, biodegradability, and price are much cheaper than other materials. It is also renewable and available in massive amounts, which are the main reasons for its use in pharmaceutical applications. Gum can be easily functionalized with other natural polymers to enhance their applications. Various aspects of the utilization of natural gums in the forms of polyelectrolyte complexes (PECs) for drug delivery systems are discussed in this review. The application of different mathematical models were used to represent the drug release mechanisms from PECs; these models include a zero-order equation, first-order equation, Higuchi, simplified Higuchi, Korsmeyer–Peppas, and Peppas–Sahlin.

To control floating drug delivery system in a simulated gastric environment by adjusting the Shell layer formulation

Background

Gastroretentive drug delivery system (GDDS) are novel systems that have been recently developed for treating stomach diseases. The key function of all GDDS systems is to control the retention time in the stomach. However, research into the bulk density or entanglement of polymers, especially regarding their effects on drug float and release times, is scarce.

Methods

In this research, we prepared the floating core-shell beads carrying tetracycline. The ratio of chitosan and xanthan gum in the shell layer was changed to modify polymer compactness. Tetracycline was encapsulated in the alginate core.

Results

Using scanning electron microscopy (SEM) techniques, we observed that the shell formulation did not change the bead morphology. The cross-sectional images showed that the beads were highly porous. The interaction between anionic xanthan gum and cationic chitosan made the shell layer dense, resisting to the mass transfer in the shell layer. Due to the high mass transfer resistance to water penetration, the longer float and delivery time were caused by the dense surface of the beads. The cell culture demonstrated that floating core-shell beads were biocompatible. Importantly, the beads with tetracycline showed a significant prolonged anti-bacterial effect.

Conclusion

Research results proved that the floating and releasing progress of core-shell beads can be well controlled by adjusting the shell layer formulation that could promote the function of gastroretentive drugs.

Inhaled antibiotic-loaded polymeric nanoparticles for the management of lower respiratory tract infections

Lower respiratory tract infections (LRTIs) are one of the leading causes of deaths in the world. Currently available treatment for this disease is with high doses of antibiotics which need to be administered frequently. Instead, pulmonary delivery of drugs has been considered as one of the most efficient routes of drug delivery to the targeted areas as it provides rapid onset of action, direct deposition of drugs into the lungs, and better therapeutic effects at low doses and is self-administrable by the patients. Thus, there is a need for scientists to design more convenient pulmonary drug delivery systems towards the innovation of a novel treatment system for LRTIs. Drug-encapsulating polymer nanoparticles have been investigated for lung delivery which could significantly reduce the limitations of the currently available treatment system for LRTIs. However, the selection of an appropriate polymer carrier for the drugs is a critical issue for the successful formulations of inhalable nanoparticles. In this review, the current understanding of LRTIs, management systems for this disease and their limitations, pulmonary drug delivery systems and the challenges of drug delivery through the pulmonary route are discussed. Drug-encapsulating polymer nanoparticles for lung delivery, antibiotics used in pulmonary delivery and drug encapsulation techniques have also been reviewed. A strong emphasis is placed on the impact of drug delivery into the infected lungs.

Lipid nanovesicles for biomedical applications: 'What is in a name'?

Vesicles, generally defined as self-assembled structures formed by single or multiple concentric bilayers that surround an aqueous core, have been widely used for biomedical applications. They can either occur naturally (e.g. exosomes) or be produced artificially and range from the micrometric scale to the nanoscale. One the most well-known vesicle is the liposome, largely employed as a drug delivery nanocarrier. Liposomes have been modified along the years to improve physicochemical and biological features, resulting in long-circulating, ligand-targeted and stimuli-responsive liposomes, among others. In this process, new nomenclatures were reported in an extensive literature. In many instances, the new names suggest the emergence of a new nanocarrier, which have caused confusion as to whether the vesicles are indeed new entities or could simply be considered modified liposomes. Herein, we discussed the extensive nomenclature of vesicles based on the suffix "some" that are employed for drug delivery and composed of various types and proportions of lipids and others amphiphilic compounds. New names have most often been selected based on changes of vesicle lipid composition, but the payload, structural complexity (e.g. multicompartment) and new/improved proprieties (e.g. elasticity) have also inspired new vesicle names. Based on this discussion, we suggested a rational classification for vesicles.

Loading of Beclomethasone in Liposomes and Hyalurosomes Improved with Mucin as Effective Approach to Counteract the Oxidative Stress Generated by Cigarette Smoke Extract

In this work beclomethasone dipropionate was loaded into liposomes and hyalurosomes modified with mucin to improve the ability of the payload to counteract the oxidative stress and involved damages caused by cigarette smoke in the airway. The vesicles were prepared by dispersing all components in the appropriate vehicle and sonicating them, thus avoiding the use of organic solvents. Unilamellar and bilamellar vesicles small in size (~117 nm), homogeneously dispersed (polydispersity index lower than 0.22) and negatively charged (~−11 mV), were obtained. Moreover, these vesicle dispersions were stable for five months at room temperature (~25 °C). In vitro studies performed using the Next Generation Impactor confirmed the suitability of the formulations to be nebulized as they were capable of reaching the last stages of the impactor that mimic the deeper airways, thus improving the deposition of beclomethasone in the target site. Further, biocompatibility studies performed by using 16HBE bronchial epithelial cells confirmed the high biocompatibility and safety of all the vesicles. Among the tested formulations, only mucin-hyalurosomes were capable of effectively counteracting the production of reactive oxygen species (ROS) induced by cigarette smoke extract, suggesting that this formulation may represent a promising tool to reduce the damaging effects of cigarette smoke in the lung tissues, thus reducing the pathogenesis of cigarette smoke-associated diseases such as chronic obstructive pulmonary disease, emphysema, and cancer.

Progress in the Application of Nano- and Micro-based Drug Delivery Systems in Pulmonary Drug Delivery

Nanotechnology is associated with the development of particles in the nano-size range that can be used in a wide range of applications in the medical field. It has gained more importance in the pharmaceutical research field particularly in drug delivery, as it results in enhanced therapeutic drug performance, improved drug solubility, targeted drug delivery to the specific sites, minimized side effects, and prolonged drug retention time in the targeted site. To date, the application of nanotechnology continues to offer several benefits in the treatment of various chronic diseases and results in remarkable improvements in treatment outcomes. The use of nano-based delivery systems such as liposomes, micelles, and nanoparticles in pulmonary drug delivery have shown to be a promising strategy in achieving drug deposition and maintained controlled drug release in the lungs. They have been widely used to minimize the risks of drug toxicity in vivo. In this review, recent advances in the application of nano- and micro-based delivery systems in pulmonary drug delivery for the treatment of various pulmonary diseases, such as lung cancer, asthma, and chronic obstructive pulmonary disease, are highlighted. Limitations in the application of these drug delivery systems and some key strategies in improving their formulation properties to overcome challenges encountered in drug delivery are also discussed.

Transfersomes: A Promising Nanoencapsulation Technique for Transdermal Drug Delivery

Transdermal delivery systems have gained much interest in recent years owing to their advantages compared to conventional oral and parenteral delivery systems. They are noninvasive and self-administered delivery systems that can improve patient compliance and provide a controlled release of the therapeutic agents. The greatest challenge of transdermal delivery systems is the barrier function of the skin's outermost layer. Molecules with molecular weights greater than 500 Da and ionized compounds generally do not pass through the skin. Therefore, only a limited number of drugs are capable of being administered by this route. Encapsulating the drugs in transfersomes are one of the potential approaches to overcome this problem. They have a bilayered structure that facilitates the encapsulation of lipophilic and hydrophilic, as well as amphiphilic, drug with higher permeation efficiencies compared to conventional liposomes. Transfersomes are elastic in nature, which can deform and squeeze themselves as an intact vesicle through narrow pores that are significantly smaller than its size. This review aims to describe the concept of transfersomes, the mechanism of action, different methods of preparation and characterization and factors affecting the properties of transfersomes, along with their recent applications in the transdermal administration of drugs.

Xanthan gum derivatives: review of synthesis, properties and diverse applications

Natural polysaccharides are well known for their biocompatibility, non-toxicity and biodegradability. These properties are also inherent to xanthan gum (XG), a microbial polysaccharide. This biomaterial has been extensively investigated as matrices for tablets, nanoparticles, microparticles, hydrogels, buccal/transdermal patches, tissue engineering scaffolds with different degrees of success. However, the native XG has its own limitations with regards to its susceptibility to microbial contamination, unusable viscosity, poor thermal and mechanical stability, and inadequate water solubility. Chemical modification can circumvent these limitations and tailor the properties of virgin XG to fulfill the unmet needs of drug delivery, tissue engineering, oil drilling and other applications. This review illustrates the process of chemical modification and/crosslinking of XG via etherification, esterification, acetalation, amidation, and oxidation. This review further describes the tailor-made properties of novel XG derivatives and their potential application in diverse fields. The physicomechanical modification and its impact on the properties of XG are also discussed. Overall, the recent developments on XG derivatives are very promising to progress further with polysaccharide research.

Due to presence of hydroxy and carboxy functional groups, xanthan gum is amenable to various chemical modification for producing derivatives such as carboxymethyl xanthan and carboxymethyl hydroxypropyl xanthan with desirable properties for end use.

The Why, Where, Who, How, and What of the vesicular delivery systems

Though vesicular delivery systems have been widely explored and reviewed, no comprehensive review exists that covers their development from the inception of the concept to its culmination in the form of regulated marketed formulations. With the advancement of scientific research in the field of nanomedicine, certain category of vesicular delivery systems have successfully reached the global market. Despite extensive research and highly encouraging results in a plethora of pathological conditions in the preclinical studies, translation of these nanomedicines from laboratory to market has been very limited. Aim of this review is to describe comprehensively the various colloidal delivery systems, focusing mainly on their conventional and advanced methods of preparation, different characterization techniques and main success stories of their journey from bench to bedside of the patient. The review also touches the finer nuances of the use of modern formulation approach of DoE (Design of Experiments) in their formulation and the status of regulatory guidelines for the approval of these nanomedicines.

Design of novel proliposome formulation for antioxidant peptide, glutathione with enhanced oral bioavailability and stability

To develop proliposome formulations to improve the oral bioavailability of l-glutathione (GSH), GSH-loaded proliposomes were prepared using the granule method. Mannitol was selected as an effective excipient to achieve the desired particle size, entrapment efficiency (EE), and solubility for oral delivery of the final formulation. To evaluate the effect of surface charge of proliposomes on the oral bioavailability of GSH, negative (F1-F4) and positive proliposomes (F5-F9) were prepared. Particle size of F1 and F5 was 167.8 ± 0.9 and 175.9 ± 2.0 nm, and zeta potential of F1 and F5 was -8.1 ± 0.7 and 21.1 ± 2.0 mV, respectively. Encapsulation efficiency of F1 and F5 was 58.6% and 54.7%, respectively. Considering their particle size, zeta potential, and EE, the proliposomes F1 and F5 were adopted as the optimal formulations for further experiments. Solid state characterization of the proliposomes confirmed lipid coating on the surface of mannitol. The release of GSH from F1 and F5 formulations was prolonged until 24 h and pH independent. The total antioxidant capacity of GSH was concentration-dependent and maintained after formulation of GSH proliposomes. Circular dichroism spectroscopy confirmed that the molecular structure of GSH was maintained in the proliposome formulations. GSH proliposomes exhibited no significant changes in particle size and zeta potential for 4 weeks. An oral bioavailability study in rats revealed that F5 exhibited 1.05-, 1.08-, and 1.11-fold higher bioavailability than F1, commercial capsule formulation, and pure GSH, respectively. In conclusion, the prepared GSH proliposomes enhanced the poor bioavailability of GSH and prolonged its duration of action.

Optimization of Innovative Three-Dimensionally-Structured Hybrid Vesicles to Improve the Cutaneous Delivery of Clotrimazole for the Treatment of Topical Candidiasis

New three-dimensionally-structured hybrid phospholipid vesicles, able to load clotrimazole in a high amount (10 mg/mL), were obtained for the first time in this work by significantly reducing the amount of water (≤10%), which was replaced with a mixture of glycerol and ethanol (≈90%). A pre-formulation study was carried out to evaluate the effect of both the composition of the hydrating medium and the concentration of the phospholipid on the physico-chemical properties of hybrid vesicles. Four different three-dimensionally-structured hybrid vesicles were selected as ideal systems for the topical application of clotrimazole. An extensive physico-chemical characterization performed using transmission electron microscopy (TEM), cryogenic transmission electron microscopy (cryo-TEM), ³¹P-NMR, and small-angle X-ray scattering (SAXS) displayed the formation of small, multi-, and unilamellar vesicles very close to each other, and was capable of forming a three-dimensional network, which stabilized the dispersion. Additionally, the dilution of the dispersion with water reduced the interactions between vesicles, leading to the formation of single unilamellar vesicles. The evaluation of the in vitro percutaneous delivery of clotrimazole showed an improved drug deposition in the skin strata provided by the three-dimensionally-structured vesicles with respect to the commercial cream (Canesten^®) used as a reference. Hybrid vesicles were highly biocompatible and showed a significant antifungal activity in vitro, greater than the commercial cream Canesten^®. The antimycotic efficacy of formulations was confirmed by the reduced proliferation of the yeast cells at the site of infection in vivo. In light of these results, clotrimazole-loaded, three-dimensionally-structured hybrid vesicles appear to be one of the most innovative and promising formulations for the treatment of candidiasis infections.

Bacterial components as naturally inspired nano-carriers for drug/gene delivery and immunization: Set the bugs to work?

Drug delivery is a rapidly growing area of research motivated by the nanotechnology revolution, the ideal of personalized medicine, and the desire to reduce the side effects of toxic anti-cancer drugs. Amongst a bewildering array of different nanostructures and nanocarriers, those examples that are fundamentally bio-inspired and derived from natural sources are particularly preferred. Delivery of vaccines is also an active area of research in this field. Bacterial cells and their components that have been used for drug delivery, include the crystalline cell-surface layer known as "S-layer", bacterial ghosts, bacterial outer membrane vesicles, and bacterial products or derivatives (e.g. spores, polymers, and magnetic nanoparticles). Considering the origin of these components from potentially pathogenic microorganisms, it is not surprising that they have been applied for vaccines and immunization. The present review critically summarizes their applications focusing on their advantages for delivery of drugs, genes, and vaccines.

Bioengineered liposome-scaffold composites as therapeutic delivery systems

The therapeutic potential of liposomes can be amplified when combined with biomaterial scaffolds. Such configurations overcome the convergent demands of therapies by enabling enhanced delivery, environmental responsiveness and potency. Liposomes benefit from the increased physical and mechanical strength, favorable rheological properties and natural environment conducive to improved tissue formation that scaffolds provide, while enabling biocompatible delivery of hydrophilic and lipophilic compounds that can be further functionalized to achieve targeted delivery. Topical, ocular, oral, nasal and vaginal applications have been explored using various polymer- or nanofiber-based scaffolds. Mechanistic and rheological findings on complexation between biomaterials, liposomes and cargo have led to multimodal systems with tremendous clinical potential. A review of the key developments in bioengineered liposome-scaffold composites is presented in this manuscript.

Preparation of gellan-cholesterol nanohydrogels embedding baicalin and evaluation of their wound healing activity

In the present work, the preparation, characterization and therapeutic potential of baicalin-loaded nanohydrogels are reported. The nanohydrogels were prepared by sonicating (S nanohydrogel) or autoclaving (A nanohydrogel) a dispersion of cholesterol-derivatized gellan in phosphate buffer. The nanohydrogel obtained by autoclave treatment showed the most promising results: smaller particles (∼362 nm vs. ∼530 nm), higher homogeneity (polydispersity index = ∼0.24 vs. ∼0.47), and lower viscosity than those obtained by sonication. In vitro studies demonstrated the ability of the nanohydrogels to favour the deposition of baicalin in the epidermis. A high biocompatibility was found for baicalin-loaded nanohydrogels, along with a great ability to counteract the toxic effect induced by hydrogen peroxide in cells, as the nanohydrogels re-established the normal conditions (∼100% viability). Further, the potential of baicalin-loaded nanohydrogels in skin wound healing was demonstrated in vivo in mice by complete skin restoration and inhibition of specific inflammatory markers (i.e., myeloperoxidase, tumor necrosis factor-α, and oedema).

Design and production of hybrid nanoparticles with polymeric-lipid shell–core structures: conventional and next-generation approaches

An innovative, simil-microfluidic, nanoliposome-covering method operating continuously with massive production yield overcoming the disadvantages of conventional methods is proposed.

Recent advances in chitosan-based nanoparticulate pulmonary drug delivery

The advent of biodegradable polymer-encapsulated drug nanoparticles has made the pulmonary route of administration an exciting area of drug delivery research. Chitosan, a natural biodegradable and biocompatible polysaccharide has received enormous attention as a carrier for drug delivery. Recently, nanoparticles of chitosan (CS) and its synthetic derivatives have been investigated for the encapsulation and delivery of many drugs with improved targeting and controlled release. Herein, recent advances in the preparation and use of micro-/nanoparticles of chitosan and its derivatives for pulmonary delivery of various therapeutic agents (drugs, genes, vaccines) are reviewed. Although chitosan has wide applications in terms of formulations and routes of drug delivery, this review is focused on pulmonary delivery of drug-encapsulated nanoparticles of chitosan and its derivatives. In addition, the controversial toxicological effects of chitosan nanoparticles for lung delivery will also be discussed.

Control Release Anesthetics to Enable an Integrated Anesthetic-mesenchymal Stromal Cell Therapeutic

While general anesthetics control pain via consciousness regulation, local anesthetics (LAs) act by decreasing sensation in the localized area of administration by blocking nerve transmission to pain centers. Perioperative intra-articular administration of LAs is a commonly employed practice in orthopedic procedures to minimize patient surgical and post-surgical pain and discomfort. LAs are also co-administered with cellular mesenchymal stromal cell (MSC) therapies for a variety of tissue regenerative and inflammatory applications including osteoarthritis (OA) treatment; however, LAs can affect MSC viability and function. Therefore, finding an improved method to co-administer LAs with cells has become critically important. We have developed a sustained release LA delivery model that could enable the co-administration of LAs and MSCs. Encapsulation of liposomes within an alginate matrix leads to sustained release of bupivacaine as compared to bupivacaine-containing liposomes alone. Furthermore, drug release is maintained for a minimum of 4 days and the alginate-liposome capsules mitigated the adverse effects of bupivacaine on MSC viability.

Co-assembly in chitosan-surfactant mixtures: thermodynamics, structures, interfacial properties and applications

In this review, different aspects characterizing chitosan-surfactant mixtures are summarized and compared. Chitosan is a bioderived cationic polysaccharide that finds wide-ranged applications in various field, e.g., medical or food industry, in which synergistic effects with surfactant can play a fundamental role. In particular, the behavior of chitosan interacting with strong and weak anionic, nonionic as well as cationic surfactants is reviewed. We put a focus on oppositely charged systems, as they exhibit the most interesting features. In that context, we discuss the thermodynamic description of the interaction and in particular the structural changes as they occur as a function of the mixed systems and external parameters. Moreover, peculiar properties of chitosan coated phospholipid vesicles are summarized. Finally, their co-assembly at interfaces is briefly reviewed. Despite the behavior of the mentioned systems might strongly differ, resulting in a high variety of properties, few general rules can be pointed out which improve the understanding of such complex systems.

Isoniazid-gelatin conjugate microparticles containing rifampicin for the treatment of tuberculosis

Objectives 

In this work, a new polymeric microparticle system based on gelatin covalently bound to isoniazid (ISN) and containing rifampicin (RFP) was prepared by spray-drying technique. Microparticle aptitude to nebulisation and their capability of interacting with A549, alveolar basal epithelial cells, were evaluated in vitro.

Methods

Microparticles were obtained by spray drying, and their morphology, size, zeta potential, thermotropic behaviour and nebulisation ability were evaluated.

Key findings 

Microparticles were positively charged with a mean size of 4.88 ± 0.3 μm. Microspheres were able to incorporate both RFP and ISN: encapsulation efficiency was 51 ± 6% and 22 ± 1%, respectively. X-ray diffraction study showed a new extensive and flattened diffraction peak providing evidence that the drugs were dispersed into the microparticles. Differential scanning calorimetry analysis confirmed effective interactions between gelatin and drug molecules by the presence of new transition peaks. Fifty-nine per cent of used microparticles were aerosolised. In-vitro toxicity studies on A549 alveolar basal epithelial cells showed that microparticles decreased cytotoxicity in comparison with the RFP solution. Laser scanning confocal microscopy observation confirmed that fluorescent probes delivered by microparticles are efficiently internalised in A549 cells.

Conclusions 

Overall, microparticles based on gelatin covalently bound to ISN and containing RFP showed a promising behaviour for pulmonary drug delivery.

Improving oral bioavailability and pharmacokinetics of liposomal metformin by glycerolphosphate-chitosan microcomplexation

The purpose of this study was to develop a new delivery system capable of improving bioavailability and controlling release of hydrophilic drugs. Metformin-loaded liposomes were prepared and to improve their stability surface was coated with chitosan cross-linked with the biocompatible β-glycerolphosphate. X-ray diffraction, differential scanning calorimetry, as well as rheological analysis were performed to investigate interactions between chitosan and β-glycerolphosphate molecules. The entrapment of liposomes into the chitosan-β-glycerolphosphate network was assessed by scanning electron microscopy and transmission electron microscopy. Swelling and mucoadhesive properties as well as drug release were evaluated in vitro while the drug oral bioavailability was evaluated in vivo on Wistar rats. Results clearly showed that, compared to control, the proposed microcomplexes led to a 2.5-fold increase of metformin T(max) with a 40% augmentation of the AUC/D value.

Characterization, activity, and computer modeling of a molecular inclusion complex containing rifaldazine

Background

The purpose of this study was to develop, characterize, and investigate a molecular inclusion complex containing rifaldazine with good solubility and antibacterial activity.

Methods

Rifaldazine, a lipophilic molecule, was encapsulated into the hydrophobic cavity of β-cyclodextrin to form a molecular inclusion complex (RAABCD) with good solubility. RAABCD was prepared in a short time using a solid-state grinding method. The inclusion ratio, binding constant, and change in Gibbs free energy were determined by a phase solubility diagram and/or ultraviolet-visible spectroscopy. Differential scanning calorimetry and Fourier transform infrared spectroscopy of RAABCD were performed. Morphological features of RAABCD were observed by photomicroscopy. The most likely optimal configuration for RAABCD was simulated by computer modeling. Broth macrodilution testing was done to investigate the antibacterial activity of RAABCD.

Results

The inclusion ratio, binding constant, and change in Gibbs free energy, determined by a phase solubility diagram and/or ultraviolet-visible spectroscopy were 1:1, 288.33/261.33 L/mol, and 32.29/31.73 kJ/mol, respectively. Differential scanning calorimetry and Fourier transformed infrared spectra of RAABCD confirmed the molecular interaction between rifaldazine and β-cyclodextrin. The morphological difference between irregular and amorphous-shaped RAABCD and columnar-shaped rifaldazine further confirmed the molecular encapsulation of rifaldazine. The most likely optimal configuration for RAABCD was confirmed by computer modeling. Broth macrodilution testing indicated that RAABCD had good antibacterial activity.

Conclusion

RAABCD had improved solubility and good activity, and might be a promising alternative for treatment of a range of bacterial infections.

Composition influence on pulmonary delivery of rifampicin liposomes

The effects of lipid concentration and composition on the physicochemical properties, aerosol performance and in vitro toxicity activity of several rifampicin-loaded liposomes were investigated. To this purpose, six liposome formulations containing different amounts of soy phosphatidylcholine and hydrogenated soy phosphatidylcholine, with and without cholesterol and oleic acid, were prepared and fully characterized. Uni- or oligo-lamellar, small (~100 nm), negatively charged (~60 mV) vesicles were obtained. Lipid composition affected aerosol delivery features of liposomal rifampicin; in particular, the highest phospholipid concentration led to a better packing of the vesicular bilayers with a consequent higher nebulization stability. The retention of drug in nebulized vesicles (NER%) was higher for oleic acid containing vesicles (55% ± 1.4%) than for the other samples (~47%). A549 cells were used to evaluate intracellular drug uptake and in vitro toxicity activity of rifampicin-loaded liposomes in comparison with the free drug. Cell toxicity was more evident when oleic acid containing liposomes were used.

Electrophoresis and dielectric dispersion of spherical polyelectrolyte brushes

Spherical polyelectrolyte brushes (SPBs) consist of a rigid core on which polyelectrolyte chains are grafted in such a way that in certain conditions (low ionic strength and high charge of the chains) the polymer chains extend radially toward the liquid medium. Because of the hairy-like structure of the polymer brushes, the typical soft-particle approach used for explaining the behavior of polyelectrolyte-coated particles must be modified, using the assumptions that the density of charged segments in the polymer chains decreases with the squared distance to the rigid core surface and that the same happens to the friction between the brushes and the surrounding fluid. Interest in clarifying the electrokinetics of these systems is not just academic. It has recently been found experimentally (Jiménez et al., Soft Matter 2011, 7, 3758-3762) that the response of concentrated suspensions of spherical polyelectrolyte brushes in the presence of alternating electric fields shows a number of unexpected features. Both dielectric and dynamic electrophoretic mobility spectra (respectively, dependences of the electric permittivity and the AC electrophoretic mobility on the frequency of the applied field) showed very special aspects, with giant values of the mobility and an unusually strong dielectric relaxation in the kHz region. In the present paper we give a full account of the electrodynamics of such systems, based on a cell model for describing the hydrodynamic and electrical interactions between the particles. It is found that the low-frequency dynamic mobility of SPBs is much higher than that of rigid particles of comparable size and charge, making any interpretation based on zeta potential estimations of very limited applicability. The very characteristic feature of SPBs in concentrated suspensions, namely, the enhanced alpha relaxation, can be explained by considering an adequate description of the field-induced perturbations in the counterion and co-ion concentrations, well developed both outside and inside the soft layer in the case of brush-coated particles. It can be also pointed out that the dynamic electrophoretic mobility of SPBs increases with the volume fraction of particles, as a consequence of the large thickness of the brush. Predictions are also shown for the effects of friction coefficient and charge of the polyelectrolyte layer. The results compare well with experimental spectra of the dynamic mobility and electric permittivity of moderately concentrated suspensions of SPBs consisting of a 50 nm polystyrene core with grafted poly(styrene sulfonate) chains some 140 nm in length.

Nano-technology for targeted drug delivery to combat antibiotic resistance

Several microbes have evolved clinically significant resistance against almost every available antibiotic. Yet the development of new classes of antibiotics has lagged far behind our growing need. Frequent and suboptimal use of antibiotics particularly in developing countries aggravated the problem by increasing the rate of resistance. Therefore, developing new and multidimensional strategies to combat microbial infections is warranted. These include i) modification of existing antibiotics, ii) searching new and novel antibiotics, iii) development and improvement of antibiotics carrier system to reduce amount and frequency of antibiotic doses, iv) development of targeted antibiotic delivery systems. Here, the authors discuss trends and development of nano-materials and alternative antimicrobials to solve the problem of antibiotic resistance.