Biowaiver Monographs for Immediate-Release Solid Oral Dosage Forms: Quinine Sulfate

Development and Validation of an Ion-Pair HPLC-UV Method for the Quantitation of Quinoline and Indoloquinoline Alkaloids in Herbal and Pharmaceutical Antimalarial Formulations

Quinine- and cryptolepine-based antimalarials serve as valuable alternatives to artemisinin-based combination therapies (ACTs) in Ghana. Their use, however, is associated with adulteration and substandard quality challenges. An HPLC method targeting quinoline and indoloquinoline antimalarial alkaloids was developed, validated, and applied to evaluate herbal and pharmaceutical antimalarial formulations (HPAFs) and starting materials (APIs). The separation/quantitation of the alkaloids (including quinine, quinidine, cinchonine, cinchonidine, dihydroquinine, dihydroquinidine, and cryptolepine) was achieved on a Zorbax SB-CN column (250 mm × 4.6 mm, 5 μm), with an isocratic elution system of methanol: trifluoroacetic acid (0.1%, v/v) (15 : 85, v/v) at 1.5 mL/min and 223 nm. Method validation was according to ICH Q2(R1) guidelines. It was then used to assess the quality of APIs (n = 3) and HPAFs (n = 44) including quinine-based pharmaceutical antimalarial formulations (QBPAFs) (n = 23) and herbal antimalarial products (HAMPs). The method was found to be specific, selective, accurate, precise, and robust toward the alkaloids with linearity achieved within specified concentration ranges (r2 > 0.995 for all analytes). Analyte stability ranged between 6 and 12 hours. All the APIs contained quinine <99.0%–101.0%, with dihydroquinine and cinchonidine at levels compliant with the established acceptance criteria. The QBPAFs had quinine content ranging between 50.2% and 151.2%, with 43.5% (n = 10/23) of them complying with the acceptance criteria. The related alkaloids observed in the QBPAFs included quinidine (56.5%, n = 13/23), dihydroquinine (100%, n = 23/23), dihydroquinidine (21.7%, n = 5/23), cinchonine (17.4%, n = 4/23), and cinchonidine (95.7%, n = 22/23). For the HAMPs, 81.0% (n = 17/21) were adulterated with quinine (0.59 ± 0.04 mg/10 mL–86.03 ± 0.02 mg/10 mL). Cryptolepine was identified in 19% (n = 4/21) of the HAMPs with concentration ranging between 43.99 ± 0.43 μg/mL and 747.86 ± 0.34 μg/mL. In conclusion, the application of the ion-pair HPLC method targeting quinoline and indoloquinoline antimalarials has demonstrated the presence of quality and poor-quality HPAFs on the Ghanaian market.

Physiologically based pharmacokinetic modeling for dose optimization of quinine-phenobarbital coadministration in patients with cerebral malaria

Patients with cerebral malaria with polymorphic Cytochrome P450 2C19 (CYP2C19) genotypes who receive concurrent treatment with quinine are at risk of inadequate or toxic therapeutic drug concentrations due to metabolic drug interactions. The study aimed to predict the potential dose regimens of quinine when coadministered with phenobarbital in adult patients with cerebral malaria and complications (e.g., lactic acidosis and acute renal failure) and concurrent with seizures and acute renal failure who carry wild‐type and polymorphic CYP2C19. The whole‐body physiologically based pharmacokinetic (PBPK) models for quinine, phenobarbital, and quinine–phenobarbital coadministration were constructed based on the previously published information using Simbiology®. Four published articles were used for model validation. A total of 100 virtual patients were simulated based on the 14‐day and 3‐day courses of treatment. using the drug–drug interaction approach. The predicted results were within 15% of the observed values. Standard phenobarbital dose, when administered with quinine, is suitable for all groups with single or continuous seizures regardless of CYP2C19 genotype, renal failure, and lactic acidosis. Dose adjustment based on area under the curve ratio provided inappropriate quinine concentrations. The recommended dose of quinine when coadministered with phenobarbital based on the PBPK model for all groups is a loading dose of 2000 mg intravenous (i.v.) infusion rate 250 mg/h followed by 1200 mg i.v. rate 150 mg/h. The developed PBPK models are credible for further simulations. Because the predicted quinine doses in all groups were similar regardless of the CYP2C19 genotype, genotyping may not be required.

Interactions of the Cocaine and Quinine Aptamer with Gold Nanoparticles under the Dilute Biosensor and Concentrated NMR Conditions

The cocaine aptamer was later found to bind quinine with an even higher affinity. In this work, we used a fluorescently labeled aptamer named MN4 to study its adsorption by gold nanoparticles (AuNPs), and the subsequent displacement by the nonlabeled aptamer and by quinine. Without washing, 14% of the preadsorbed MN4 strands were displaced by 4000-fold excess of free MN4, whereas no displacement was observed after washing, suggesting that washing removed weakly adsorbed aptamers. In a previous paper, rapid exchange was observed with NMR by directly mixing AuNPs and concentrated MN4, and our work has unified the dilute and concentrated aptamer conditions. The difference is attributable to the conformation of the adsorbed aptamer, where dilute aptamers are adsorbed in a collapsed state with a much higher affinity to AuNPs. In addition, the preadsorbed MN4 aptamer cannot be desorbed by adding quinine, indicating that direct desorption-based fluorescent sensors cannot be made. Finally, based on the similar color responses to both the aptamer and its nonbinding mutants, the label-free colorimetric detection method cannot be directly applied for the detection of quinine. This work indicated that different experimental conditions need to be carefully compared to have a unified understanding of aptamer/AuNP systems.

An Assessment of Occasional Bio-Inequivalence for BCS1 and BCS3 Drugs: What are the Underlying Reasons?

Despite having adequate solubility properties, bioequivalence (BE) studies performed on immediate release formulations containing BCS1/3 drugs occasionally fail. By systematically evaluating a set of 17 soluble drugs where unexpected BE failures have been reported and comparing to a set of 29 drugs where no such reports have been documented, a broad assessment of the risk factors leading to BE failure was performed. BE failures for BCS1/3 drugs were predominantly related to changes in C_max rather than AUC. C_max changes were typically modest, with minimal clinical significance for most drugs. Overall, drugs with a sharp plasma peak were identified as a key factor in BE failure risk. A new pharmacokinetic term (t½C_max) is proposed to identify drugs at higher risk due to their peak plasma profile shape. In addition, the analysis revealed that weak acids, and drugs with particularly high gastric solubility are potentially more vulnerable to BE failure, particularly when these features are combined with a sharp C_max peak. BCS3 drugs, which are often characterised as being more vulnerable to BE failure due to their potential for permeation and transit to be altered, particularly by excipient change, were not in general at greater risk of BE failures. These findings will help to inform how biowaivers may be optimally applied in the future.

Molecular salts of quinine: a crystal engineering route to enhance the aqueous solubility

Salts of quinine, with α,ω-aliphatic dicarboxylic acids, and aromatic coformers, show superior aqueous solubility. The structural, thermal and microscopy data provide structural, compositional, and stability profiles of the salts.

Aptamer-ligand recognition studied by native ion mobility-mass spectrometry

The range of applications for aptamers, small oligonucleotide-based receptors binding to their targets with high specificity and affinity, has been steadily expanding. Our understanding of the mechanisms governing aptamer-ligand recognition and binding is however lagging, stymieing the progress in the rational design of new aptamers and optimization of the known ones. Here we demonstrate the capabilities and limitations of native ion mobility-mass spectrometry for the analysis of their higher-order structure and non-covalent interactions. A set of related cocaine-binding aptamers, displaying a range of folding properties and ligand binding affinities, was used as a case study in both positive and negative electrospray ionization modes. Using carefully controlled experimental conditions, we probed their conformational behavior and interactions with the high-affinity ligand quinine as a surrogate for cocaine. The ratios of bound and unbound aptamers in the mass spectra were used to rank them according to their apparent quinine-binding affinity, qualitatively matching the published ranking order. The arrival time differences between the free aptamer and aptamer-quinine complexes were consistent with a small ligand-induced conformational change, and found to inversely correlate with the affinity of binding. This mass spectrometry-based approach provides a fast and convenient way to study the molecular basis of aptamer-ligand recognition.

Quinine-Based Semisynthetic Ion Transporters with Potential Antiproliferative Activities

Synthetic ion transporters have attracted tremendous attention for their therapeutic potential against various ion-transport-related diseases, including cancer. Inspired by the structure and biological activities of natural products, we synthesized a small series of squaramide and thiourea derivatives of quinine and investigated their ion transport activities. The involvement of a quinuclidine moiety for the cooperative interactions of Cl^- and H⁺ ions with the thiourea or squaramide moiety resulted in an effectual transport of these ions across membranes. The interference of ionic equilibrium by the potent Cl^- ion carrier selectively induced cancer cell death by endorsing caspase-arbitrated apoptosis. In vivo assessment of the potent ionophore showed an efficient reduction in tumor growth with negligible immunotoxicity to other organs.

Physicochemical Quality Assessment of Antimalarial Medicines: Chloroquine Phosphate and Quinine Sulfate Tablets from Drug Retail Outlets of South-West Ethiopia

Background

Malaria is a complex disease and main community health problem in Africa and the top leading cause of outpatient visits, admissions, and deaths in Ethiopia. Its effective management is possible through early diagnosis and immediate treatment employing antimalarials. The quality of these drugs has to be good enough to attain their intended purpose. However, there are treatment failures resulted from the consumption of falsified and substandard antimalarials. Therefore, the current study was undertaken to evaluate the quality of two commonly used antimalarial drugs [chloroquine phosphate and quinine sulfate tablets] and to determine whether the quality of these drugs was affected by the origin, brand and sample collection sites in South-West Ethiopia.

Methods

Random sampling based on Ethiopian malaria eco-epidemiological strata map, with different levels of medicines outlets, was applied to select sampling sites.

Results

Sixty samples were bought from 43 drug retails (pharmacy, drug store, and drug vendor) in twelve different geographical locations of South-West Ethiopia between June and July 2016. Visual inspection was done for all samples before the lab experiment. A 28.3%, 31.7%, and 6.8% of samples failed to comply with the Pharmacopoeial quality standards for visual inspection, hardness and weight variation tests, respectively. Statistical analysis revealed that origin and geography from which samples were collected significantly affects the active pharmaceutical content of both drugs at P < 0.05 level. Significant variation was observed for chloroquine samples within batches of the same manufacturing and between origins.

Conclusion

This study indicated that all the chloroquine and quinine tablets met the quality specification concerning friability, dissolution and assay. Out-of-specification results for weight variation, hardness and visual inspection tests for the chloroquine tablets are signs of substandard/spurious/falsely labeled/falsified/counterfeit actions that may compromise the quality of these drugs. Besides, within the acceptance limit, the origin of drugs and collection sites have found to determine the quality which raises good manufacturing practice and storage (drug supply chain system) issues to be evaluated.

Physiologically-Based Pharmacokinetic Modeling for Optimal Dosage Prediction of Quinine Coadministered With Ritonavir-Boosted Lopinavir

The coformulated lopinavir/ritonavir significantly reduces quinine concentration in healthy volunteers due to potential drug-drug interactions (DDIs). However, DDI information in malaria and HIV coinfected patients are lacking. The objective of the study was to apply physiologically-based pharmacokinetic (PBPK) modeling to predict optimal dosage regimens of quinine when coadministered with lopinavir/ritonavir in malaria and HIV coinfected patients with different conditions. The developed model was validated against literature. Model verification was evaluated using the accepted method. The verified PBPK models successfully predicted unbound quinine disposition when coadministered with lopinavir/ritonavir in coinfected patients with different conditions. Suitable dose adjustments to counteract with the DDIs have identified in patients with various situations (i.e., a 7-day course at 1,800 mg t.i.d. in patients with malaria with HIV infection, 648 mg b.i.d. in chronic renal failure, 648 mg t.i.d. in hepatic insufficiency except for severe hepatic insufficiency (324 mg b.i.d.), and 648 mg t.i.d. in CYP3A4 polymorphism).

Application of data mining approach to identify drug subclasses based on solubility and permeability

Solubility and permeability are recognized as key parameters governing drug intestinal absorption and represent the basis for biopharmaceutics drug classification. The Biopharmaceutics Classification System (BCS) is widely accepted and adopted by regulatory agencies. However, currently established low/high permeability and solubility boundaries are the subject of the ongoing scientific discussion. The aim of the present study was to apply data mining analysis on the selected drugs data set in order to develop a human permeability predictive model based on selected molecular descriptors, and to perform data clustering and classification to identify drug subclasses with respect to dose/solubility ratio (D/S) and effective permeability (P_eff ). The P_eff values predicted for 30 model drugs for which experimental human permeability data are not available were in good agreement with the reported fraction of drug absorbed. The results of clustering and classification analysis indicate the predominant influence of P_eff over D/S. Two P_eff cut-off values (1 × 10^-4 and 2.7 × 10^-4  cm/s) have been identified indicating the existence of an intermediate group of drugs with moderate permeability. Advanced computational analysis employed in the present study enabled the recognition of complex relationships and patterns within physicochemical and biopharmaceutical properties associated with drug bioperformance.

The impact of the EMA change in definition of "dose" on the BCS dose-solubility ratio: a review of the biowaiver monographs

The Biopharmaceutics Classification System (BCS) defines the solubility characteristics of an active pharmaceutical substance based on its dose-solubility ratio: for highly soluble drugs this ratio is less than 250 mL over a defined pH range. Prior to the revision of the European Medicines Agency (EMA, formerly EMEA) guideline in 2010, the "dose" in this ratio was consistently defined by the US FDA, the EMA, and the WHO biowaiver guidelines as the highest dosage strength. However, in the revised EMA guideline, the dose is defined as the highest single dose administered according to the Summary of Product Characteristics. The new EMA criterion for highly soluble may be closer to the actual conditions of use, but it is not in line with the dose that would be used in the in vivo bioequivalence study. This paper evaluates the impact on the BCS classification of the active pharmaceutical ingredients of the published biowaiver monographs and discusses the consequences of the possible change in classification on biowaiver recommendations. Using the current definition of dose by the EMA, the biowaiver recommendations for metoclopramide hydrochloride and verapamil hydrochloride are no longer valid according to EMA criteria. For prednisolone and prednisone, a reevaluation of the biowaiver recommendation, taking into account the usual dosing levels, seems appropriate.