Piperine as a molecular bridge mediates a ternary coamorphous system of polyphenols with enhanced pharmaceutical properties

The coamorphous formulations have attracted increasing interest due to enhanced solubility and bioavailability, together with synergistic pharmacological effects. In this study, a ternary coamorphous system of polyphenols was successfully prepared, wherein baicalein (Bai) and resveratrol (Res) were constructed into a single-phase coamorphous system mediated by piperine (Pip). FTIR and ss 13C NMR spectra together with quantum chemical calculation and molecular dynamics simulation suggested Pip as a molecular bridge connected Bai and Res molecules through π-π stacking and hydrogen bonding interactions. The configuration of coamorphous Bai-Pip-Res could minimize the system energy to facilitate its formation and enhance the stability. The ternary system showed 3.2, 4.3 and 5.3-fold increase in apparent solubilities of Bai, Res and Pip, and maintained the peak concentrations for at least 24 h. Compared to binary coamorphous systems, the ternary system exhibited superior physical stability under temperature and humidity conditions. Furthermore, coamorphous Bai-Pip-Res exhibited enhanced antibacterial activity, significant antioxidant ability and synergistic anti-inflammatory effect. This work offers a promising strategy to construct a ternary coamorphous delivery system with enhanced pharmaceutical properties by incorporating a molecular bridge, especially for components with the lack of intermolecular interactions.

Solution-mediated phase transformation of cocrystals at the solid-liquid interface: Relationships between the supersaturation generation rate and transformation pathway

Cocrystals easily undergo solution-mediated phase transformation at the surface of dissolving cocrystals during dissolution, which significantly deteriorates the solubility advantage of cocrystals. Here, a new scenario for the phase transformation of liquiritigenin (LQ) cocrystals in which the boundary of phase transformation diffuses along the surface to the bulk of the cocrystal was identified. Additionally, depending on the rate of supersaturation generation, phase transformation processes to the anhydrate and hydrate of LQ compete during cocrystal dissolution. The liquiritigenin-nicotinamide (LQ-NIC) cocrystal yielded a higher supersaturation rate, causing the nucleation kinetics to dominate the recrystallization process and the formation of a metastable form of LQ. However, in the liquiritigenin-isoniazid (LQ-INZ) cocrystal, the low supersaturation rate leading to recrystallization was controlled by thermodynamics and the subsequent formation of monohydrates of LQ (less soluble). As a result, in plain buffer, a multistep pathway for phase transformation of the LQ-NIC cocrystal was observed, in which the cocrystal was firstly converted into the anhydrate LQ (metastable form) and subsequently transformed into LQ·H2O. A one-step phase transformation was observed for the LQ-INZ cocrystal, where the cocrystal was directly converted to LQ·H2O. In a buffer containing the Eudragit E100 (E100) additive, for the LQ-NIC cocrystal, the dissolution performance was improved, which can presumably be attributed to the solubilization effect of E100 on the anhydrate and the inhibitory effect on the transformation of the anhydrate to the monohydrate. However, for the LQ-INZ cocrystal, a negligible improvement in drug concentration was observed in the presence of E100 because of the slight effects of E100 on the solubility of LQ·H2O. These findings provide valuable insights into the phase transformation pathways of cocrystals at the solid-liquid interface and the effects of additives on the dissolution behavior of cocrystals.

Atopic dermatitis treatment: A comprehensive review of conventional and novel bioengineered approaches

Atopic dermatitis (AD) remains a challenging condition, with conventional treatments often leading to adverse effects and limited efficacy. This review explores the diverse landscape of AD treatments, encompassing conventional methods, novel topical and systemic therapies, and emerging bioengineered strategies. While conventional drug administration often requires high dosages or frequent administration, leading to adverse effects, targeted biologics have shown promise. Phototherapy and wet wrap therapy, while helpful, have limitations. Given these factors, the need for modern and effective therapeutic strategies for AD is pressing. Complementary or alternative therapies have garnered significant attention in recent years as a compelling treatment for AD. Among these, functionalized biomaterials and textiles with physicochemical, nanotechnology-based characteristics, or bioengineered features are some of the most common typical adjuvant therapies. The multifunctional-engineered biomaterials, as a new generation of biomedical materials, and stem cells, seem to hold tremendous promise for the treatment of dermatological diseases like AD. Biomaterials have seen great success, especially in various medical fields, due to their unique and adaptable characteristics. These materials, including collagen, PCL, and PLGA, offer unique advantages, such as biocompatibility, biodegradability, controlled drug release, and enhanced drug retention.

Optimizing Drug Development: Harnessing the Sustainability of Pharmaceutical Cocrystals

Environmental impacts of the industrial revolution necessitate adoption of sustainable practices in all areas of development. The pharmaceutical industry faces increasing pressure to minimize its ecological footprint due to its significant contribution to environmental pollution. Over the past two decades, pharmaceutical cocrystals have received immense popularity due to their ability to optimize the critical attributes of active pharmaceutical ingredients and presented an avenue to bring improved drug products to the market. This review explores the potential of pharmaceutical cocrystals as an ecofriendly alternative to traditional solid forms, offering a sustainable approach to drug development. From reducing the number of required doses to improving the stability of actives, from eliminating synthetic operations to using pharmaceutically approved chemicals, from the use of continuous and solvent-free manufacturing methods to leveraging published data on the safety and toxicology, the cocrystallization approach contributes to sustainability of drug development. The latest trends suggest a promising role of pharmaceutical cocrystals in bringing novel and improved medicines to the market, which has been further fuelled by the recent guidance from the major regulatory agencies.

Unlocking the potential of flavonoid-based co-crystal and co-amorphous systems

Flavonoids are polyphenolic compounds that have multiple benefits in treating various life-threatening diseases. Despite their diverse pharmacological activities, the market potential of flavonoids is hampered due to their poor solubility and low bioavailability after oral administration. The current review highlights the role of co-crystals and co-amorphous systems (CAMs) in enhancing the solubility, permeability, bioavailability, and therapeutic efficacy of flavonoids. It also explains the significance of flavonoid-based co-formers in the formation of co-crystals and CAMs with other APIs to improve their efficacy. Future perspectives, patented formulations, commercial medications (including their phases of clinical trials), and challenges associated with the use of flavonoid-based co-crystals and CAMs are also mentioned in the review.

Amelioration of tableting properties and dissolution rate of naproxen co-grinded with nicotinamide: preparation and characterization of co-grinded mixture

OBJECTIVE AND SIGNIFICANCE

Reducing the dimensions, when other additives are present, shows potential as a method to improve the dissolution and solubility of biopharmaceutical classification system class II drugs that have poor solubility. In this investigation, the process involved grinding naproxen with nicotinamide with the aim of improving solubility and the rate of dissolution.

METHODS

Naproxen was subjected to co-milling with urea, dimethylurea, and nicotinamide using a planetary ball mill for a duration of 90 min, maintaining a 1:1 molar ratio for the excipients (screening studies). The co-milled combinations, naproxen in its pure milled form, and a physical mixture were subjected to analysis using X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), and solubility assessment. The mixture displaying the highest solubility (naproxen-nicotinamide) was chosen for further investigation, involving testing for intrinsic dissolution rate (IDR) and Fourier-transform infrared spectroscopy (FTIR) after co-milling for both 90 and 480 min.

RESULTS AND CONCLUSION

The co-milled combination, denoted as S-3b and consisting of the most substantial ratio of nicotinamide to naproxen at 1:3, subjected to 480 min of milling, exhibited a remarkable 45-fold increase in solubility and a 9-fold increase in IDR. XRPD analysis of the co-milled samples demonstrated no amorphization, while SEM images portrayed the aggregates of naproxen with nicotinamide. FTIR outcomes negate the presence of any chemical interactions between the components. The co-milled sample exhibiting the highest solubility and IDR was used to create a tablet, which was then subjected to comprehensive evaluation for standard attributes. The results revealed improved compressibility and dissolution properties.

Development and Evaluation of Tacrolimus Loaded Nano-Transferosomes for Skin Targeting and Dermatitis Treatment

Tacrolimus (TRL) is used for the treatment of atopic dermatitis (AD) due to its T-cell stimulation effect. However, its significantly poor water solubility, low penetration and cytotoxicity have reduced its topical applications. Herein, tacrolimus loaded nano transfersomes (TRL-NTs) were prepared, followed by their incorporation into chitosan gel to prepare tacrolimus loaded nano transfersomal gel (TRL-NTsG). TEM analysis of the TRL-NTs was performed to check their morphology. DSC, XRD and FTIR analysis of the TRL-NTs were executed after lyophilization. Similarly, rheology, spreadability and deformability of the TRL-NTsG were investigated. In vitro release, ex vivo permeation and in vitro interaction of TRL-NTsG with keratinocytes and fibroblasts as well as their co-cultures were investigated along with their in vitro cell viability analysis. Moreover, in vivo skin deposition, ear thickness, histopathology and IgE level were also determined. Besides, 6 months stability study was also performed. Results demonstrated the uniformly distributed negatively charged nanovesicles with a mean particle size distribution of 163 nm and zeta potential of -27 mV. DSC and XRD exhibited the thermal stability and amorphous form of the drug, respectively. The TRL-NTsG showed excellent deformability, spreadability and rheological behavior. In vitro release studies exhibited an 8-fold better release of TRL from the TRL-NTsG. Similarly, 6-fold better permeation and stability of the TRL-NTsG with keratinocytes and fibroblasts as well as their co-cultures was observed. Furthermore, the ear thickness (0.6 mm) of the TRL-NTsG was found significantly reduced when compared with the untreated (1.7 mm) and TRL conventional gel treated mice (1.3 mm). The H&E staining showed no toxicity of the TRL-NTsG with significantly reduced IgE levels (120 ng/mL). The formulation was found stable for at least 6 months. These results suggested the efficacy of TRL in AD-induced animal models most importantly when incorporated in NTsG.

Recent Advances in Co-Former Screening and Formation Prediction of Multicomponent Solid Forms of Low Molecular Weight Drugs

Multicomponent solid forms of low molecular weight drugs, such as co-crystals, salts, and co-amorphous systems, are a result of the combination of an active pharmaceutical ingredient (API) with a pharmaceutically acceptable co-former. These solid forms can enhance the physicochemical and pharmacokinetic properties of APIs, making them increasingly interesting and important in recent decades. Nevertheless, predicting the formation of API multicomponent solid forms in the early stages of formulation development can be challenging, as it often requires significant time and resources. To address this, empirical and computational methods have been developed to help screen for potential co-formers more efficiently and accurately, thus reducing the number of laboratory experiments needed. This review provides a comprehensive overview of current screening and prediction methods for the formation of API multicomponent solid forms, covering both crystalline states (co-crystals and salts) and amorphous forms (co-amorphous). Furthermore, it discusses recent advances and emerging trends in prediction methods, with a particular focus on artificial intelligence.

Exploring the Solubility and Bioavailability of Sodium Salt and Its Free Acid Solid Dispersions of Dolutegravir

Amorphous salt solid dispersion (ASSD) of Dolutegravir amorphous salt (DSSD) was generated using quench cooling and compared to its Dolutegravir free acid solid dispersion (DFSD) to improve the solubility and bioavailability. Soluplus (SLP) was used as a polymeric carrier in both solid dispersions. The prepared DSSD and DFSD, physical mixtures, and individual compounds were characterized by employing DSC, XRPD, and FTIR to assess the formation of the single homogenous amorphous phase and the existence of intermolecular interactions. Partial crystallinity was observed for DSSD, unlike DFSD, which is completely amorphous. No intermolecular interactions were observed between the Dolutegravir sodium (DS)/Dolutegravir free acid (DF) and SLP from the FTIR spectra of DSSD and DFSD. Both DSSD and DFSD improved the solubility of Dolutegravir (DTG) to 5.7 and 4.54 folds compared to the pure forms. Similarly, drug release from DSSD and DFSD was 2 and 1.5 folds higher than that in the pure form, owing to the rapid dissolution of the drug from the formulations. The permeability of DSSD and DFSD was estimated using the dialysis membrane, which enhanced the DTG permeability. The improvement in in vitro studies was translated into in vivo pharmacokinetic profiles of DSSD and DFSD, where 4.0 and 5.6 folds, respectively, improved the C_max of DTG.

Mechanistic Study on Transformation of Coamorphous Baicalein-Nicotinamide to Its Cocrystal Form

Recently, coamorphization and cocrystal technologies are of particular interest in the pharmaceutical industry due to their ability to improve the solubility/dissolution and bioavailability of poorly water-soluble drugs, while the coamorphous system often tends to convert into the stable crystalline form usually crystalline physical mixture of each component during formulation preparation or storage. In this paper, BCS II drug baicalein (BAI) along with nicotinamide (NIC) were prepared into a single homogeneous coamorphous system with a single transition temperature at 42.5 °C. Interestingly, instead of the physical mixture of crystalline BAI and NIC, coamorphous BAI-NIC would transform to its cocrystal form under stress of temperature and humidity. The transformation rate under isothermal condition was temperature-dependent, since the crystallinity of the cocrystal enhanced as the temperature increased. Further mechanic studies showed the activation energy for the transformation under non-isothermal condition was calculated to be 184.52 kJ/mol. Additionally, water vapor sorption tests with further solid characterizations indicated the transformation was faster under higher humidity condition due to the faster nucleation process of cocrystal BAI-NIC. This research not only discovered the mechanism of transformation from coamorphous BAI-NIC to cocrystal form, but also provided an unusual method for cocrystal preparation from its coamorphous form.

Recent Advances in Pharmaceutical Cocrystals: A Focused Review of Flavonoid Cocrystals

Cocrystallization is currently an attractive technique for tailoring the physicochemical properties of active pharmaceutical ingredients (APIs). Flavonoids are a large class of natural products with a wide range of beneficial properties, including anticancer, anti-inflammatory, antiviral and antioxidant properties, which makes them extensively studied. In order to improve the properties of flavonoids, such as solubility and bioavailability, the formation of cocrystals may be a feasible strategy. This review discusses in detail the possible hydrogen bond sites in the structure of APIs and the hydrogen bonding networks in the cocrystal structures, which will be beneficial for the targeted synthesis of flavonoid cocrystals. In addition, some successful studies that favorably alter the physicochemical properties of APIs through cocrystallization with coformers are also highlighted here. In addition to improving the solubility and bioavailability of flavonoids in most cases, flavonoid cocrystals may also alter their other properties, such as anti-inflammatory activity and photoluminescence properties.

Novel Ascorbic Acid Co-Crystal Formulations for Improved Stability

A series of co-crystals of ascorbic acid were prepared with equimolar amounts of co-crystal formers (CCFs), including isonicotinic acid, nicotinic acid, 3,4-dihydroxybenzoic acid, 2,5-dihydroxybenzoic acid and m-hydroxybenzoic acid, by slow solvent evaporation and solvent-assisted grinding. The co-crystals were characterized by single-crystal X-ray diffraction spectroscopy, powder X-ray diffraction, IR spectroscopy, differential scanning calorimetry and thermogravimetric analysis. Molecular dynamics (MD) simulations further validated the interaction energy and the possible intermolecular hydrogen bonds among VC and CCFs. The co-crystals showed improved stability when exposed to different wavelengths of light, pH and temperatures compared to the free analogue, especially at higher pH (~9) and lower temperature (~4 °C).

The Multifaceted Role of Baicalein in Cancer Management through Modulation of Cell Signalling Pathways

The roles of medicinal plants or their purified bioactive compounds have attracted attention in the field of health sciences due to their low toxicity and minimal side effects. Baicalein is an active polyphenolic compound, isolated from Scutellaria baicalensis, and plays a significant role in the management of different diseases. Epidemiologic studies have proven that there is an inverse association between baicalein consumption and disease severity. Baicalein is known to display anticancer activity through the inhibition of inflammation and cell proliferation. Additionally, the anticancer potential of baicalein is chiefly mediated through the modulation of various cell-signaling pathways, such as the induction of apoptosis, autophagy, cell cycle arrest, inhibition of angiogenesis, signal transducer and activator of transcription 3, and PI3K/Akt pathways, as well as the regulation of other molecular targets. Therefore, the current review aimed to explore the role of baicalein in different types of cancer along with mechanisms of action. Besides this, the synergistic effects with other anti-cancerous drugs and the nano-formulation based delivery of baicalein have also been discussed.

Discovery strategy leads to the first melt-castable cocrystal based on an energetic oxidizing salt

Cocrystallization is a synthetic method employed across fields to improve functional materials while preserving properties inherent to the molecules/ions involved. However, there is no guarantee that cocrystals will demonstrate improved properties relative to the constituent materials. Oxygen balance, which is closely correlated to the performance of energetic materials, is an exception in that this attribute may be targetted with certainty. The combination of energetic oxidizing salts with small molecules presents a seemingly straightforward path to energetic materials with desirable performance properties. Unfortunately no general approach for the cocrystallization of salts and small molecules (salt cocrystallization) has yet emerged. Presented here is such an approach, focussing on ammonium salts, and applied to the energetic oxidizing salt ammonium dinitramide to achieve a melt-castable energetic material. Though focused on ammonium salts, this salt cocrystallization paradigm is a general approach that may be extended to other ions.

Application of Physiologically Based Pharmacokinetic Modeling in Preclinical Studies: A Feasible Strategy to Practice the Principles of 3Rs

Pharmacokinetic characterization plays a vital role in drug discovery and development. Although involving numerous laboratory animals with error-prone, labor-intensive, and time-consuming procedures, pharmacokinetic profiling is still irreplaceable in preclinical studies. With physiologically based pharmacokinetic (PBPK) modeling, the in vivo profiles of drug absorption, distribution, metabolism, and excretion can be predicted. To evaluate the application of such an approach in preclinical investigations, the plasma pharmacokinetic profiles of seven commonly used probe substrates of microsomal enzymes, including phenacetin, tolbutamide, omeprazole, metoprolol, chlorzoxazone, nifedipine, and baicalein, were predicted in rats using bottom-up PBPK models built with in vitro data alone. The prediction's reliability was assessed by comparison with in vivo pharmacokinetic data reported in the literature. The overall predicted accuracy of PBPK models was good with most fold errors within 2, and the coefficient of determination (R2) between the predicted concentration data and the observed ones was more than 0.8. Moreover, most of the observation dots were within the prediction span of the sensitivity analysis. We conclude that PBPK modeling with acceptable accuracy may be incorporated into preclinical studies to refine in vivo investigations, and PBPK modeling is a feasible strategy to practice the principles of 3Rs.

Understanding Hygroscopicity of Theophylline via a Novel Cocrystal Polymorph: A Charge Density Study

The charge density distribution in a novel cocrystal (1) complex of 1,3-dimethylxanthine (theophylline) and propanedioic acid (malonic acid) has been determined. The molecules crystallize in the triclinic, centrosymmetric space group P1̅, with four independent molecules (Z = 4) in the asymmetric unit (two molecules each of theophylline and malonic acid). Theophylline has a notably high hygroscopic nature, and numerous cocrystals have shown a significant improvement in stability to humidity. A charge density study of the novel polymorph has identified interesting theoretical results correlating the stability enhancement of theophylline via cocrystallization. Topological analysis of the electron density highlighted key differences (up to 17.8) in Laplacian (∇²ρ) between the experimental (EXP) and single-point (SP) models, mainly around intermolecular-bonded carbonyls. Further investigation via molecular electrostatic potential maps reaffirmed that the charge redistribution enhanced intramolecular hydrogen bonding, predominantly for N(2') and N(2) (61.2 and 61.8 kJ mol^-1, respectively). An overall weaker lattice energy of the triclinic form (-126.1 kJ mol^-1) compared to that of the monoclinic form (-133.8 kJ mol^-1) suggests a lower energy threshold to overcome to initiate dissociation. Future work via physical testing of the novel cocrystal in both dissolution and solubility will further solidify the correlation between theoretical and experimental results.

Application of TPGS as an efflux inhibitor and a plasticizer in baicalein solid dispersion

The oral bioavailability and efficacy of baicalein is dramatically limited by its low solubility and effect of efflux. In our study, we chose PVP-VA64 as a carrier and TPGS as a plasticizer and efflux inhibitor to prepare a solid dispersion of baicalein using hot-melt extrusion technology to improve its solubility and bioavailability. The hot-melt process and formulation were optimized, and a BAC-PVP VA64-TPGS solid dispersion (BPT-SD) was prepared. BAC exists in an amorphous or molecular state in BPT-SD. BPT-SD comprised irregular lumps and small particles without BAC or carrier characteristics. The dissolution efficiency of BPT-SD improved under sink conditions. FTIR showed a strong hydrogen bond between BAC and PVP-VA64 in BPT-SD. BPT-SD maintained good physical stability for 6 months. The apparent permeability coefficient of BAC in the Caco-2 cell model confirmed that BPT-SD had higher gastrointestinal membrane permeability. A rat pharmacokinetic study showed that BPT-SD had higher C_max and AUC_0-24h, shorter T_max, and 2.88-fold higher bioavailability than BAC. A behavioral experiment in chronic unpredictable mild stress (CUMS) mice confirmed the antidepressant efficacy of BAC. BPT-SD reversed depression-like behavior in CUMS mice and improved BAC bioavailability. BAC preparation into a solid dispersion significantly enhanced dissolution performance and bioavailability.

Pharmaceutical cocrystals: A review of preparations, physicochemical properties and applications

Pharmaceutical cocrystals are multicomponent systems in which at least one component is an active pharmaceutical ingredient and the others are pharmaceutically acceptable ingredients. Cocrystallization of a drug substance with a coformer is a promising and emerging approach to improve the performance of pharmaceuticals, such as solubility, dissolution profile, pharmacokinetics and stability. This review article presents a comprehensive overview of pharmaceutical cocrystals, including preparation methods, physicochemical properties, and applications. Furthermore, some examples of drug cocrystals are highlighted to illustrate the effect of crystal structures on the various aspects of active pharmaceutical ingredients, such as physical stability, chemical stability, mechanical properties, optical properties, bioavailability, sustained release and therapeutic effect. This review will provide guidance for more efficient design and manufacture of pharmaceutical cocrystals with desired physicochemical properties and applications.

Thermodynamics and Intermolecular Interactions of Nicotinamide in Neat and Binary Solutions: Experimental Measurements and COSMO-RS Concentration Dependent Reactions Investigations

In this study, the temperature-dependent solubility of nicotinamide (niacin) was measured in six neat solvents and five aqueous-organic binary mixtures (methanol, 1,4-dioxane, acetonitrile, DMSO and DMF). It was discovered that the selected set of organic solvents offer all sorts of solvent effects, including co-solvent, synergistic, and anti-solvent features, enabling flexible tuning of niacin solubility. In addition, differential scanning calorimetry was used to characterize the fusion thermodynamics of nicotinamide. In particular, the heat capacity change upon melting was measured. The experimental data were interpreted by means of COSMO-RS-DARE (conductor-like screening model for realistic solvation-dimerization, aggregation, and reaction extension) for concentration dependent reactions. The solute-solute and solute-solvent intermolecular interactions were found to be significant in all of the studied systems, which was proven by the computed mutual affinity of the components at the saturated conditions. The values of the Gibbs free energies of pair formation were derived at an advanced level of theory (MP2), including corrections for electron correlation and zero point vibrational energy (ZPE). In all of the studied systems the self-association of nicotinamide was found to be a predominant intermolecular complex, irrespective of the temperature and composition of the binary system. The application of the COSMO-RS-DARE approach led to a perfect match between the computed and measured solubility data, by optimizing the parameter of intermolecular interactions.

A Drug-Drug Cocrystal of Dihydromyricetin and Pentoxifylline

Drug-drug cocrystals, which can regulate physicochemical properties of individual drugs and might produce synergistic therapeutic effects, have drawn growing interest in the pharmaceutical industry. In this study, a novel drug-drug (1:1) cocrystal hydrate of slightly water-soluble dihydromyricetin (DMY) and highly water-soluble pentoxifylline (PTX), DMY-PTX•H₂O (1), was prepared by a slurry method. The single-crystal X-ray diffraction results reveal that the cocrystal is formed through hydrogen-bonding interactions between hydroxyl groups of DMY and four acceptors of PTX. The dynamic vapour sorption results indicate that the cocrystal displays reduced hydrophilicity compared with DMY. It is found that cocrystal formation narrows the solubility difference between two parent drugs. The equilibrium solubility of PTX decreases greatly, while that of DMY increases slightly. As a result, DMY and PTX are synchronously and sustainedly released from the cocrystal. Further, a synergistic anti-cancer effect of the cocrystal DMY-PTX•H₂O (1) on HepG2 cells in vitro at a drug concentration of 100 μM was discovered. This study brings evidence of cocrystallization as a successful approach for synchronous sustained-release of two drugs with substantially different aqueous solubility.

Competitive cocrystallization and its application in the separation of flavonoids

Recently, cocrystallization has been widely employed to tailor physicochemical properties of drugs in the pharmaceutical field. In this study, cocrystallization was applied to separate natural compounds with similar structures. Three flavonoids [baicalein (BAI), quercetin (QUE) and myricetin (MYR)] were used as model compounds. The coformer caffeine (CAF) could form cocrystals with all three flavonoids, namely BAI-CAF (cocrystal 1), QUE-CAF (cocrystal 2) and MYR-CAF (cocrystal 3). After adding CAF to methanol solution containing MYR and QUE (or QUE and BAI), cocrystal 3 (or cocrystal 2) preferentially formed rather than cocrystal 2 (or cocrystal 1), indicating that flavonoid separation could be achieved by competitive cocrystallization. After co-mixing the slurry of two flavonoids with CAF followed by centrifugation, the resolution ratio that could be achieved was 70-80% with purity >90%. Among the three cocrystals, cocrystal 3 showed the lowest formation constant with a negative Gibbs free energy of nucleation and the highest energy gap. Hirshfeld surface analysis and density of states analysis found that cocrystal 3 had the highest strong interaction contribution and the closest electronic density, respectively, followed by cocrystal 2 and cocrystal 1, suggesting CAF could competitively form a cocrystal with MYR much more easily than QUE and BAI. Cocrystallization is a promising approach for green and effective separation of natural products with similar chemical structures.

Delivery Mechanism of the Pharmaceutical Complex of Genistein-Adenine Based on Spectroscopic and Molecular Modelling at Atomic Scale

Genistein (GS) exhibits various biological activities, but its clinical application is limited because of the low bioavailability. In this study, a GS-adenine pharmaceutical complex was prepared through solvent evaporation to improve the bioavailability of GS, and a molecular model of a two-component supramolecular pharmacological transport mechanism was established. The structure of GS-adenine was characterized, in addition, interaction patterns between GS and adenine were investigated using density functional theory. The results showed that the solubility of GS-adenine was five times higher than that of GS, and the cumulative release rate of GS-adenine was 86 %. The results of fluorescence spectroscopy and molecular dynamic simulations showed that GS-adenine bound to the Sudlow's site I of HSA mainly through hydrophobic interactions. This study provides a useful reference for synthesizing pharmaceutical complexes to improve solubility and for exploring the mechanism of multiple pharmaceutical components in vivo.

The role of 3-OH in the self-assembly of pharmaceutical cocrystals of dihydroflavonol with 4,4′-bipyridine

The 3-OH group of nonplanar dihydroflavonols participates in the formation of hydrogen bonds with BPY, thereby forming cocrystals with different structures.

Cosmeceutical Aptitudes of Niacinamide: A Review

BACKGROUND

The prevalence and scope of dermatological illness differ from region to region. Based upon type and severity, the conditions may vary from superficial to deep systemic skin infections. Niacinamide, an amide analog of vitamin B3 which was conventionally utilized as a food supplement, is now explored for the management of skin disorders. Being a powerhouse on its own, it is not stored inside the body naturally and has to be acquired from external sources. Areas Covered: This review is an attempt to disclose the physiology, pharmacology, and highlight the dermatological potentials of niacinamide, discussing its pharmacological mechanisms, varied commercially available treatments, and novel approaches, i.e., in research and patented formulations.

RESULTS

Niacinamide has been verified in treating almost every skin disorder, viz. aging, hyperpigmentation, acne, psoriasis, pruritus, dermatitis, fungal infections, epidermal melasma, non-melanoma skin cancer, etc. It has been reported to possess numerous properties, for instance, anti-inflammatory, antimicrobial, antioxidant, antipruritic, and anticancer, which makes it an ideal ingredient for varied dermal therapies. Long term use of niacinamide, regardless of the skin type, paves the way for new skin cells, making skin healthier, brighter, and hydrated.

CONCLUSION

Niacinamide possesses a variety of positive characteristics in the field of dermatology. Novel approaches are warranted over current treatments which could bypass the above shortcomings and form an effective and stable system. Hence, niacinamide has the potential to become an individual and a productive component with wide future scope.

Cocrystal engineering of pharmaceutical solids: therapeutic potential and challenges

This highlight presents an overview of pharmaceutical cocrystal production and its potential in reviving problematic properties of drugs in different dosage forms. The challenges and future outlook of its translational development are discussed.

Pre-clinical evaluation of an innovative oral nano-formulation of baicalein for modulation of radiation responses

There is an unmet medical need for non-toxic and effective radiation countermeasures for prevention of radiation toxicity during planned exposures. We have earlier shown that intraperitoneal administration of baicalein (BCL) offers significant survival benefit in animal model. Safety, tolerability, pharmacokinetics (PK) and pharmacodynamics of baicalein has been reported in pre-clinical model systems and also in healthy human volunteers. However, clinical translation of baicalein is hindered owing to poor bioavailability due to lipophilicity. In view of this, we fabricated and characterized in-situ solid lipid nanoparticles of baicalein (SLNB) with effective drug entrapment and release kinetics. SLNB offered significant protection to murine splenic lymphocytes against 4 Gy ionizing radiation (IR) induced apoptosis. Oral administration of SLNB exhibited ~70% protection to mice against whole body irradiation (WBI 7.5 Gy) induced mortality. Oral relative bioavailability of BCL was enhanced by over ~300% after entrapment in the SLNB as compared to BCL. Oral dosing of SLNB resulted in transient increase in neutrophil abundance in peripheral blood. Interestingly, we observed that treatment of human lung cancer cells (A549) with radioprotective dose of SLNB exhibited radio-sensitization as evinced by decrease in survival and clonogenic potential. Contrary to antioxidant nature of baicalein in normal cells, SLNB treatment induced significant increase in cellular ROS levels in A549 cells probably due to higher uptake and inhibition of TrxR. Thus, a pharmaceutically acceptable SLNB exhibited improved bioavailability, better radioprotection to normal cells and sensitized cancer cells to radiation induced killing as compared to BCL suggesting its possible utility as an adjuvant during cancer radiotherapy.

Poly (ethylene glycol)-block-poly (D, L-lactide) (PEG-PLA) micelles for brain delivery of baicalein through nasal route for potential treatment of neurodegenerative diseases due to oxidative stress and inflammation: An in vitro and in vivo study

The application of baicalein (BE) in central nervous system (CNS) neurodegenerative diseases is hampered by its poor solubility and low oral bioavailability despite its neuroprotective effects. In this study, BE was encapsulated into poly (ethylene glycol)-block-poly (D, L-lactide) micelles (BE-MC) and administrated through nasal inhalation to enhance its brain distribution. BE-MC showed comparable in-vitro antioxidant activity to BE solution. Cytotoxicity study illustrated BE-MC could reduce BE's toxicity in SH-SY5Y cells and BV-2 cells. BE solution at concentration higher than 5 µM caused significant BV-2 cells' death after stimulation of LPS while BE-MC were non-toxic to cells at concentrations up to 50 µM. BE solution at 5 µM had no anti-inflammatory effects in BV-2 cells while BE-MC could reduce the inflammatory factor TNF-α at 5 µM and IL-6 at 20 µM significantly. Pharmacokinetic studies in C57BL/6 mice showed the absolute AUC values of BE in plasma and brain of BE-MC through nasal inhalation group were 5.09-fold and 1.50-fold higher than that of BE coarse powder through oral administration group at the same dose. Thus, our study indicated BE-MC administered nasally could be useful for treatment of CNS neurodegenerative diseases due to oxidative stress and inflammation.

Terahertz spectroscopic characterizations and DFT calculations of carbamazepine cocrystals with nicotinamide, saccharin and fumaric acid

Carbamazepine cocrystals with nicotinamide, saccharin and fumaric acid were synthesized and characterized by time-domain terahertz spectroscopy. Lattice vibrations of cocrystals with their individual constituents were investigated by means of the dispersion-corrected density functional theory with and without cell parameter constraints. The simulated THz spectra successfully reproduce the features of all the crystals in their experimental spectra. A better agreement between experimental and theoretical THz spectra is achieved when the cell parameter constraints are applied in geometry optimization. Some intensive modes of neat carbamazepine and cocrystals were discussed in terms of the motions of hydrogen bonds. The effect of lattice vibration on these cocrystallizations was further examined to gain insights into the thermodynamics. It is found that lattice vibration is favorable for all these cocrystal formations.

Cocrystallization: Cutting Edge Tool for Physicochemical Modulation of Active Pharmaceutical Ingredients

Cocrystallization is a widely accepted and clinically relevant technique that has prospered very well over the past decades to potentially modify the physicochemical properties of existing active pharmaceutic ingredients (APIs) without compromising their therapeutic benefits. Over time, it has become an integral part of the pre-formulation stage of drug development because of its ability to yield cocrystals with improved properties in a way that other traditional methods cannot easily achieve. Cocrystals are solid crystalline materials composed of two or more than two molecules which are non-covalently bonded in the same crystal lattice. Due to the continuous efforts of pharmaceutical scientists and crystal engineers, today cocrystals have emerged as a cutting edge tool to modulate poor physicochemical properties of APIs such as solubility, permeability, bioavailability, improving poor mechanical properties and taste masking. The success of cocrystals can be traced back by looking at the number of products that are getting regulatory approval. At present, many cocrystals have obtained regulatory approval and they successfully made into the market place followed by a fair number of cocrystals that are currently in the clinical phases. Considering all these facts about cocrystals, the formulation scientists have been inspired to undertake more relevant research to extract out maximum benefits. Here in this review cocrystallization technique will be discussed in detail with respect to its background, different synthesis approaches, synthesis mechanism, application and improvements in drug delivery systems and its regulatory perspective.

Structural Characterization of Co-Crystals of Chlordiazepoxide with p-Aminobenzoic Acid and Lorazepam with Nicotinamide by DSC, X-Ray Diffraction, FTIR and Raman Spectroscopy

The low water solubility of benzodiazepines seriously affects their bioavailability and, in consequence, their biological activity. Since co-crystallization has been found to be a promising way to modify undesirable properties in active pharmaceutical ingredients, the objective of this study was to prepare co-crystals of two benzodiazepines, chlordiazepoxide and lorazepam. Using different co-crystallization procedures, slurry evaporation and liquid-assisted grinding, co-crystals of chlordiazepoxide with p-aminobenzoic acid and lorazepam with nicotinamide were prepared for the first time. Confirmation that co-crystals were obtained was achieved through a comparison of the data acquired for both co-crystals using differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), Fourier-transform infrared (FTIR) and Raman spectroscopy, with comparisons acquired for the physical mixtures of both benzodiazepines and coformers. The compatibility of PXRD patterns of both benzodiazepines co-crystals with those contained in the base Powder Diffraction File (PDF-4+) suggests that new crystal structures were indeed created under the co-crystallization procedure. Single-crystal X-ray diffraction revealed that a chlordiazepoxide co-crystal with p-aminobenzoic acid and a lorazepam co-crystal with nicotinamide crystallized in the monoclinic P2₁/n and P2₁/c space group, respectively, with one molecule of benzodiazepine and one of coformer in the asymmetric unit. FTIR and Raman spectroscopy corroborated that benzodiazepine and coformer are linked by a hydrogen bond without proton exchange. Furthermore, a DSC study revealed that single endothermic DSC peaks assigned to the melting of co-crystals differ slightly depending on the co-crystallization procedures and solvent used, as well as differing from those of starting components.

Benzodiazepines co-crystals screening using FTIR and Raman spectroscopy supported by differential scanning calorimetry

Co-crystals, which are defined as "solids that are crystalline materials composed of two or more molecules in the same crystal lattice" have recently been the focus of increased interest in the pharmaceutical industry since co-crystallization can improve unfavorable physicochemical properties of active pharmaceutical ingredients. Thus, the quest for new co-crystal screening methods has become an issue of importance. The aim of this work was, therefore, to show to what extent expanded methodology based on FTIR and Raman spectroscopy supported by the DSC method can be used as a reliable tool to screen co-crystallization. Because co-crystals of benzodiazepines had not yet been obtained, a set of 72 binary mixtures composed of eight 1,4-benzodiazepine derivatives and nine coformers were used as model substances. Potential co-crystals were prepared in solid-state by liquid-assisted grinding procedure. The characteristic FTIR and Raman bands which reflect hydrogen bond formation between benzodiazepine and coformer were used as proof of co-crystal creation. DSC was used as a supporting tool to reflect the phase transitions which occur during co-crystallization. As a result of the study, four potential co-crystals can be selected: lorazepam with nicotinamide, chlordiazepoxide with p-aminobenzoic and saccharin, and estazolam with fumaric acid. The detailed spectral and thermal characteristics of these systems are presented in this work. Thus, the proposed methodology of co-crystal screening based on FTIR and Raman data supported by the DSC examination of phase transitions facilitates the screening and detection of benzodiazepine co-crystal prepared by short time components ground with a slight additional volume of solvent.

Polymorphs of DP-VPA Solid Solutions and Their Physicochemical Properties

Different solid forms possess various physicochemical properties, which can significantly affect the stability, bioavailability, and manufacturability of the final product. DP-VPA, a complex of 1-stearoyl-2-valproyl-sn-glycero-3-phosphatidylcholine (DP-VPA-C₁₈) and 1-palmitoyl-2-valproyl-sn-glycero-3-phosphatidylcholine (DP-VPA-C₁₆), is currently under development as an antiepileptic drug. DP-VPA-C₁₆ and DP-VPA-C₁₈ crystallize together in solid solution forms. The solid forms of DP-VPA solid solution were studied herein. Powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), dynamic vapor sorption (DVS) and optical microscopy were used to characterize the different crystalline forms, known as polymorphs. The physicochemical properties, including hygroscopicity, thermodynamic behavior, and relative stability, of each form were investigated. DVS analysis showed that DP-VPA solid solution reduced the hygroscopicity of DP-VPA-C₁₆. The relative humidity stability study revealed that Forms A and B are relatively stable, while Forms A-1, B-1, C and D are highly unstable under natural humidity. Further analysis revealed that Form A transforms into Form B through milling. Given the physicochemical properties of the available physical forms, Form B may be the optimal form for the formulation and development of antiepileptic drugs.

A New Ferulic Acid-Nicotinamide Cocrystal With Improved Solubility and Dissolution Performance

Among the various strategies for increasing aqueous solubility of pharmaceutical substances, cocrystals have been emerging as a promising alternative. The ferulic acid (FEA) is a molecule with limited aqueous solubility, but with an interesting pharmacological activity, highlighting its antitumor potential. This study presents the characterization and physicochemical properties of a new cocrystal based on FEA and nicotinamide (NIC). The FEA-NIC cocrystal was obtained by solvent evaporation technique and physicochemically characterized by differential scanning calorimetry, powder X-ray diffraction, Fourier transform infrared spectroscopy, solid-state nuclear magnetic resonance and scanning electron microscopy. The content determination and dissolution profile in different media were analyzed by high-performance liquid chromatography. The results obtained with the characterization techniques indicated the obtainment of an anhydrous cocrystal of FEA and NIC at a 1:1 molar ratio. The method was reproducible and obtained a high yield, of approximately 99%. In addition, a 70% increase in the FEA solubility in the cocrystal and a better dissolution performance than the physical mixture in pH 6.8 were achieved.

Oral absorption and lymphatic transport of baicalein following drug-phospholipid complex incorporation in self-microemulsifying drug delivery systems

PURPOSE

The aims of this study were to prepare a baicalein self-microemulsion with baicalein-phospholipid complex as the intermediate (BAPC-SMEDDS) and to compare its effects with those of conventional baicalein self-microemulsion (CBA-SMEDDS) on baicalein oral absorption and lymphatic transport.

METHODS

Two SMEDDS were characterized by emulsifying efficiency, droplet size, zeta potential, cloud point, dilution stability, physical stability, and in vitro release and lipolysis. Different formulations of 40 mg/kg baicalein were orally administered to Sprague-Dawley rats to investigate their respective bioavailabilities. The chylomicron flow blocking rat model was used to evaluate their lymphatic transport.

RESULTS

The droplet sizes of BAPC-SMEDDS and CBA-SMEDDS after 100x dilution were 9.6±0.2 nm and 11.3±0.4 nm, respectively. In vivo experiments indicated that the relative bioavailability of CBA-SMEDDS and BAPC-SMEDDS was 342.5% and 448.7% compared to that of free baicalein (BA). The AUC0-t and Cmax of BAPC-SMEDDS were 1.31 and 1.87 times higher than those of CBA-SMEDDS, respectively. The lymphatic transport study revealed that 81.2% of orally absorbed BA entered the circulation directly through the portal vein, whereas approximately 18.8% was transported into the blood via lymphatic transport. CBA-SMEDDS and BAPC-SMEDDS increased the lymphatic transport ratio of BA from 18.8% to 56.2% and 70.2%, respectively. Therefore, self-microemulsion not only significantly improves oral bioavailability of baicalein, but also increases the proportion lymphatically transported. This is beneficial to the direct interaction of baicalein with relevant immune cells in the lymphatic system and for proper display of its effects.

CONCLUSION

This study demonstrates the oral absorption and lymphatic transport characteristics of free baicalein and baicalein SMEDDS with different compositions. This is of great significance to studies on lymphatic targeted delivery of natural immunomodulatory compounds.

Pharmacokinetics of B-Ring Unsubstituted Flavones

B-ring unsubstituted flavones (of which the most widely known are chrysin, baicalein, wogonin, and oroxylin A) are 2-phenylchromen-4-one molecules of which the B-ring is devoid of any hydroxy, methoxy, or other substituent. They may be found naturally in a number of herbal products used for therapeutic purposes, and several have been designed by researchers and obtained in the laboratory. They have generated interest in the scientific community for their potential use in a variety of pathologies, and understanding their pharmacokinetics is important for a grasp of their optimal use. Based on a comprehensive survey of the relevant literature, this paper examines their absorption (with deglycosylation as a preliminary step) and their fate in the body, from metabolism to excretion. Differences among species (inter-individual) and within the same species (intra-individual) variability have been examined based on the available data, and finally, knowledge gaps and directions of future research are discussed.

Bioavailability Enhancement of Poorly Soluble Drugs: The Holy Grail in Pharma Industry

Background:

Bioavailability, one of the prime pharmacokinetic properties of a drug, is defined as the fraction of an administered dose of unchanged drug that reaches the systemic circulation and is used to describe the systemic availability of a drug. Bioavailability assessment is imperative in order to demonstrate whether the drug attains the desirable systemic exposure for effective therapy. In recent years, bioavailability has become the subject of importance in drug discovery and development studies.

Methods:

A systematic literature review in the field of bioavailability and the approaches towards its enhancement have been comprehensively done, purely focusing upon recent papers. The data mining was performed using databases like PubMed, Science Direct and general Google searches and the collected data was exhaustively studied and summarized in a generalized manner.

Results:

The main prospect of this review was to generate a comprehensive one-stop summary of the numerous available approaches and their pharmaceutical applications in improving the stability concerns, physicochemical and mechanical properties of the poorly water-soluble drugs which directly or indirectly augment their bioavailability.

Conclusion:

The use of novel methods, including but not limited to, nano-based formulations, bio-enhancers, solid dispersions, lipid-and polymer-based formulations which provide a wide range of applications not only increases the solubility and permeability of the poorly bioavailable drugs but also improves their stability, and targeting efficacy. Although, these methods have drastically changed the pharmaceutical industry demand for the newer potential methods with better outcomes in the field of pharmaceutical science to formulate various dosage forms with adequate systemic availability and improved patient compliance, further research is required.