Impact of salt levels on the sensory profile and consumer acceptance of Italian dry-cured ham

Effects of slaughter weight and backfat depth on trimming, curing, and deboning losses and quality traits of Italian dry-cured ham

This study aimed at assessing the effects of two infra-vitam traits, specifically the slaughter weight (SW) and the ultrasound backfat depth (BCKF) on several post-mortem and quality traits of typical Prosciutto Veneto protected designation of origin (PDO) dry-cured ham. The trial was conducted on a population of 423 pigs fed using different strategies to generate a high variation in SW (175 ± 15.5 kg) and BCKF (23.16 ± 4.14 mm). All the left thighs were weighed at slaughter and the ham factory during the different processing phases. The fat cover depth of green trimmed hams was measured. Data were analyzed with a linear model including SW classified in tertiles, BCKF as a covariate, SW × BCKF interaction, sex, batch, and pen nested within batch. Our results highlighted that, for each 10 kg increase in SW, trimmed and seasoned ham weights increased by 0.76 and 0.54 kg, respectively. The increase in SW significantly reduced relative curing and deboning losses but did not affect ham fat cover depth and trimming losses. A rise in BCKF increased the ham fat cover depth and trimming losses and decreased the curing and deboning losses. Increases in SW and BCKF improved quality traits of the seasoned ham including fat cover depth, visible marbling, inner lean firmness, and fat color. These findings confirm the feasibility of increasing SW and BCKF, which will result in a reduction in the relative losses associated with the dry-curing process while improving the quality of the seasoned ham.

Investigating the effects of low-salt processing on the umami peptides of dry-cured ham using peptidomics techniques

This study investigated the effect of low-salt processing on the umami peptide profile of dry-cured hams. Peptidomics data showed 633 umami peptides in the low- and full-salt groups. Among them, 36.2% and 26.5% of shared umami peptides in the low-salt group were significantly down- and up-regulated in relative abundance. Multivariate statistical analysis showed 1011 significantly different umami peptides (SDUPs) in the low- and full-salt groups. Creatine kinase M-type (CKM) and fast skeletal muscle troponin T (TnTf) were the main precursor proteins of these SDUPs. At the end of processing, the relative expression of CKM was lower in the low-salt group than in the full-salt group (P < 0.05), but there was no significant difference in TnTf. More dipeptidyl peptidase cleavage sites were observed in CKM and TnTf proteins in the low-salt group.

Novel NaCl reduction technologies for dry-cured meat products and their mechanisms: A comprehensive review

Sodium chloride (NaCl) confers a unique flavor and quality in meat products, however, due to growing concerns about the adverse effects of excessive NaCl consumption, how to reduce NaCl content while ensuring quality and safety has become a research hotspot in this field. This review mainly discusses the role of NaCl in dry-cured meat, as well as novel salt-reducing substances that can substitute for the effects of NaCl to achieve sodium reduction objectives. New technologies, such as vacuum curing, ultrahigh pressure curing, ultrasonic curing, pulsed electric field curing, and gamma irradiation, to facilitate the development of low-sodium products are also introduced. The majority of current salt reduction technologies function to enhance salt diffusion and decrease curing time, resulting in a decrease in NaCl content. Notably, future studies should focus on implementing multiple strategies to compensate for the deficiencies in flavor and safety caused by NaCl reduction.

Effect of ultrasonic treatment on the quality of Mianning ham

This paper investigates the optimal process for ultrasonic desalination of Mianning ham. The study analyzed various factors such as ultrasonic treatment time, temperature, and power to determine their impact on the rate of desalination of hams. A single factor test was conducted to study the rate of desalination. Further, A Box-Behnken experimental design was used to evaluate the effect of Mianning ham desalination. The design examined the impacts of ultrasound on the physicochemical properties, texture, and sensory of the ham. Response surface processing group underwent oral processing to determine the optimal ultrasonic treatment conditions with the highest acceptance level. The results show that the best conditions were: ultrasonic time 84.56 min, ultrasonic temperature 40.35°C, and ultrasonic power 150.85 W. The average desalination rate of the ham under the optimal conditions was 25.93% ± 0.69%, and the hardness was 4.48 N ± 0.62 N. Overall, this process significantly improved the desalination rate, texture, and sensory quality of Mianning ham, providing solid theoretical support for desalination processing at the back end of ham.

Elucidation of the Impact of Steaming on the Key Odorants of Jinhua Dry-Cured Ham Using the Sensomics Approach

Jinhua dry-cured ham (JDH) is a traditional fermented meat product favored by Chinese consumers. In this paper, the impact of steaming on the key odorants of JDH was investigated using the sensomics approach. Compounds with odor activity values (OAV) ≥1 were re-engineered in a triglyceride matrix to imitate the odor profiles of both raw and steamed JDHs. The aroma-active compounds were then confirmed by recombination and omission tests using triangle tests. The odor profiles of raw and steamed JDHs were obtained by quantitative descriptive analysis to compare the differences between the original and recombined models. The results showed that pentanal, hexanal, dimethyl trisulfide, (E,E)-2,4-decadienal, (E)-2-heptenal, furaneol, 3-methylbutanoic acid, 1-octen-3-one, and methional influenced the overall raw JDH odor significantly. Furaneol was first reported as a key compound that provides a caramel smell to the raw JDH. Apart from (E)-2-heptenal, dimethyl trisulfide, furaneol, 3-methylbutanoic acid, and methional, the remaining three compounds including 2-furfurylthiol, benzeneacetaldehyde, and phenylethyl alcohol showed a significant influence on the odor profile of steamed JDH. The statistical analysis of the odor profiles showed an 80.0% similarity between the recombination raw JDH and the real raw JDH, and a 76.3% similarity between the model and the real steamed JDH.

Influence of Pig Genetic Line and Salt Reduction on Peptide Production and Bioactivity of Dry-Cured Hams

Ham (Jamón) is a product of great value in Spanish gastronomy, although experts have recommended reducing its consumption due to its high salt content and its relationship with cardio-vascular diseases due to the increase in blood pressure it may cause. Therefore, the objective of this study was to evaluate how the reduction of salt content and the pig genetic line influence bioactivity in boneless hams. For this purpose, 54 hams were studied, 18 boneless Iberian hams (RIB), 18 boneless white hams from commercial cross-bred pigs (RWC), and 18 salted and traditionally processed Iberian hams (TIB) to check if the pig genetic line (RIB vs. RWC) or the processing (RIB vs. TIB) affect the peptide production and bioactivity of the hams. The pig genetic line significantly affected the activity of ACE-I and DPPH, with RWC having the highest ACE-I activity and RIB having the highest antioxidative activity. This coincides with the results obtained in the identification of the peptides and the bioactivity analysis performed. Salt reduction positively affected the different hams, influencing their proteolysis and increasing their bioactivity in traditionally cured hams.

Decoding of the Saltiness Enhancement Taste Peptides from the Yeast Extract and Molecular Docking to the Taste Receptor T1R1/T1R3

The development of saltiness or saltiness enhancement peptides is important to decrease the dietary risk factor of high sodium. Taste peptides in the yeast extract were separated by ultrafiltration and subsequently identified by UPLC-Q-TOF-MS/MS. The 377 identified peptides were placed into the umami receptor T1R1/T1R3. The results showed that eight taste peptides with higher binding energies were screened by molecular virtual docking, and the results revealed that Asp218, Ser276, and Asn150 of T1R1 play key roles in umami docking of peptides. The taste characteristic description and saltiness enhancement effect results suggested that PKLLLLPKP (sourness and umami, 0.18 mM), GGISTGNLN (sourness, 0.59 mM), LVKGGLIP (umami, 0.28 mM), and SSAVK (umami, 0.35 mM) had higher saltiness enhancement effects. The sigmoid curve analysis further confirmed that the taste detection threshold of the GGISTGNLN in the peptide and salt model (157.47 mg/L) was lower than 320.99 mg/L and exhibited a synergistic effect on saltiness perception, whereas SSAVK, PKLLLLPKP, and LVKGGLIP exhibited additive effects on the saltiness perception. This work also corroborated previous research, which indicated that the sourness and umami taste attributes could enhance the saltiness perception.

Effect of Salt Reduction on the Quality of Boneless Dry-Cured Ham from Iberian and White Commercially Crossed Pigs

Iberian dry-cured ham has great value in a traditional Spanish diet, although experts have recommended its consumption should be reduced because of its high salt content and link to cardiovascular diseases. Eighteen boneless Iberian hams (RIB), eighteen boneless white commercially crossed pig hams (RWC), and eighteen traditionally salted and processed Iberian hams (TIB) were manufactured to check whether the breed (RIB vs. RWC) or the processing (RIB vs. TIB) affects their physical–chemical and sensory characteristics. Moisture, protein, total nitrogen, nonprotein nitrogen, proteolysis index, NaCl, and ash contents were higher in RWC, contrary to the fat values, which were more than double in RIB. All macrominerals, except Ca, were affected by the processing stage and breed, whereas only the micromineral Zn was higher in RWC. The breed did not affect the free amino acid content; however, the total content was slightly higher in RWC. Regarding the manufacturing process, the deboning of RIB allowed the reduction of salt by over 30%. However, the microbiological stability was not affected, resulting in a safe product. Although deboning and salt reduction significantly affect the hardness, adhesiveness, deformation, and elasticity of dry-cured hams, consumers value all sensory parameters with higher scores in RIB.

Effect of Salt Content Reduction on Food Processing Technology

Higher salt intake is associated with the risk of cardiovascular and kidney diseases, hypertension and gastric cancer. Salt intake reduction represents an effective way to improve people’s health, either by the right choice of food or by a reduction of added salt. Salt substitutes are often used and also herb homogenates are treated by high pressure technology. Salt reduction significantly influences the shelf life, texture, pH, taste, and aroma of cheese. The composition of emulsifying salts or starter cultures must be modified to enact changes in microbial diversity, protease activity and the ripening process. The texture becomes softer and aroma atypical. In bakery products, a salt reduction of only 20–30% is acceptable. Water absorption, dough development, length and intensity of kneading and stability of dough are changed. Gluten development and its viscoelastic properties are affected. The salt reduction promotes yeast growth and CO₂ production. Specific volume and crust colour intensity decreased, and the crumb porosity changed. In meat products, salt provides flavour, texture, and shelf life, and water activity increases. In this case, myofibrillar proteins’ solubility, water binding activity and colour intensity changes were found. The composition of curing nitrite salt mixtures and starter cultures must be modified.

Effect of reducing sodium chloride based on the sensory properties of meat products and the improvement strategies employed: a review

Many consumers are concerned about the high levels of salt intake owing to the accompanied risk of chronic diseases. Due to this dietary concern, the food industry has recommended the reduction of salt content in many products. However, the addition of salt to meat products improves their quality and sensory properties, including saltiness, color, juiciness, and texture. Because quality deteriorations could induce decreased sensory scores owing to salt reductions, the challenges involved in improving the quality of reduced-salt meat products have been addressed. During the development of low-salt meat products, it is important to reduce sodium content and address the problems that arise with this reduction. Modified salt, organic acids, amino acids, nucleotides, hydrocolloids, high-pressure, ultrasound, electric pulsed field, and irradiation have been suggested as strategies to replace or reduce sodium content, and sensory scores could be improved by these strategies. Therefore, when developing a low-salt meat product, several perspectives must be considered and the latest technologies that could resolve this problem should be adopted.

Partial Characterization of the Impact of Saffron on the Sensory and Physicochemical Quality Traits of Dry-Cured Ham

This study determined the effect of adding three concentrations of saffron (A: high, B: medium, and C: low) on vacuum-packaged dry-cured ham slices. The pH and the color coordinates were assessed at 0, 7, 14, 28 and 60 days of storage, and sensorial quality (visual appearance, odor and flavor) and safranal content were analyzed at 7, 14, 28 and 60 days. Saffron concentration did not significantly affect the pH or color (except in a* (redness) and b* (yellowness) at day 28; p < 0.001). Storage period affected pH values (p < 0.001) in all groups with a significant decline from day 28 (p < 0.05); the color coordinates showed a high stability (only L* (lightness) varied in the C group samples; p < 0.01). Sensorial quality did not vary with the time in any group. Significant differences were found among groups in visual appearance (p < 0.05) and flavor (p < 0.001) at day 14 and in odor at day 14, 28, and 60. In general, the C group samples obtained the highest scores. Safranal content varied significantly with the time in a different way in each group, with differences among groups at day 14 and 60 (p < 0.001).

Investigating the Features of PDO Green Hams during Salting: Insights for New Markers and Genomic Regions in Commercial Hybrid Pigs

Protected Designation of Origin (PDO) dry-cured hams production is greatly dependent on raw meat quality. This study was performed to identify genetic markers associated with the quality of dry-cured ham. Carcass traits of 229 heavy pigs belonging to three commercial genetic lines were registered (weight, EUROP classification). Phenotypic traits (Semimembranosus muscle ultimate pH, ham weight and lean meat content, adsorbed salt) of the corresponding thighs, undergone PDO ham process in three different plants, were measured, using a fast and non-invasive technology. Green ham weight and lean meat percentage influenced the estimated salt content and the weight loss during salting, even if the processing plant greatly affected the variability of the measured ham traits. The genomic data were obtained with the GeneSeek Genomic Profiler (GGP) 70k HD Porcine Array, using the slaughter day and the sex of the animals in the statistical analyses. The phenotypic traits were associated with the genotypes through GenAbel software. The results showed that 18 SNPs located on nine porcine chromosomes were found to be associated with nine phenotypic traits, mainly related to ham weight loss during salting. New associations were found between markers in the genes Neural Precursor Cell Expressed Developmentally Down-Regulated 9 (NEDD9, SSC7), T-Cell Lymphoma Invasion and Metastasis 2 (TIAM2, SSC1), and the ham quality traits. After validation, these SNPs may be useful to improve the quality of thighs for the production of PDO dry-cured hams.

Processing parameters involved in the development of texture and tyrosine precipitates in dry-cured ham: Modelisation of texture development

The aim of this study was to quantify the effects of different processing parameters on texture development and the incidence of white film and tyrosine crystals in dry-cured ham. Hams were dry-salted for 0.65, 0.8 or 1.0 days/kg. After drying for 45 days at 5 °C, they were dried at 10, 15 or 20 °C until reaching 33% weight loss and, thereafter, dried at 25 °C until reaching 36 or 40% weight loss. The salting time, drying temperature and target weight loss significantly affected the texture and incidence of white film and tyrosine crystals. A beneficial effect of drying at 20 °C on texture was found, which was especially important for low target weight loss (33%). Besides, hams dried at 20 °C and those with 40% weight loss showed higher incidence of tyrosine crystals. Contour plots and predictive models for texture can be used to define optimal processing parameters.