Effect of biosurfactant extract obtained from the corn-milling industry on probiotic bacteria in drinkable yogurt

Combination of enzymatically hydrolyzed potato powder with skimmed milk powder on the quality improvements of yogurt during refrigeration storage

This study aimed to prepare a stirred type of fat-free yogurt from enzymatically hydrolyzed potato powder (EHPP) and skimmed milk powder (SMP) without changing its quality and consumer acceptance. The yogurt formulations prepared contained different amount of EHPP 0, 10, 25 and 50% and were stored for 28 days at 4 °C and observed that with increasing substitution ratio, acid production was increased while the viability of lactic acid bacteria was decreased after 28 days of storage at 4 °C. The antioxidant activities (2-Diphenyl-1-picryl-hydrazyl (DPPH) free radical scavenging activity and ferric reducing antioxidant power (FRAP) of the yogurt were increased with increasing EHPP over the storage period. The yogurt formulations having 25 to 50% EHPP has the highest DPPH free radical scavenging activity and FRAP values. Water holding capacity (WHC) was decreased over the storage period with 25% EHPP. The hardness, adhesiveness and gumminess were decreased while no significant change was found in springiness with EHPP addition over the storage period. The rheological analysis showed an elastic behavior of yogurt gels with EHPP supplementation. The sensory results of yogurt containing 25% EHPP have the highest values of taste and acceptance. Yogurt in combination with EHPP and SMP has the higher levels of WHC than non-supplemented yogurt and better stability was recorded during storage.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05737-9.

Purification of lipopeptide biosurfactant extracts obtained from a complex residual food stream using Tricine-SDS-PAGE electrophoresis

Protocols to identify lipopeptide biosurfactant extracts contained in complex residual streams are very important, as fermented agri-food matrices are potential sources of these valuable compounds. For instance, corn steep liquor (CSL), a secondary stream of the corn wet-milling industry, is composed of a mixture of microbial metabolites, produced during the corn steeping process, and other natural metabolites released from corn, that can interfere with the purification and analysis of lipopeptides. Electrophoresis could be an interesting technique for the purification and further characterization of lipopeptide biosurfactant extracts contained in secondary residual streams like CSL, but there is little existing literature about it. It is necessary to consider that lipopeptide biosurfactants, like Surfactin, usually are substances that are poorly soluble in water at acidic or neutral pH, forming micelles what can inhibit their separation by electrophoresis. In this work, two lipopeptide biosurfactant extracts obtained directly from CSL, after liquid-liquid extraction with chloroform or ethyl acetate, were purified by applying a second liquid extraction with ethanol. Following that, ethanolic biosurfactant extracts were subjected to electrophoresis under different conditions. Lipopeptides on Tricine-SDS-PAGE (polyacrylamide gels) were better visualized and identified by fluorescence using SYPRO Ruby dye than using Coomassie blue dye. The matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) analysis of lipopeptide isoforms separated by electrophoresis revealed the presence of masses at 1,044, 1,058, and 1,074 m/z, concluding that Tricine-SDS-PAGE electrophoresis combined with MALDI-TOF-MS could be a useful tool for purifying and identifying lipopeptides in complex matrices.

Effect of a Biosurfactant Extract Obtained from a Corn Kernel Fermented Stream on the Sensory Colour Properties of Apple and Orange Juices

In this work, we assessed the effect of a biosurfactant extract, which possesses preservative properties, on the sensory properties, regarding colour, of two fruit juices: pasteurized apple juice and natural orange juice. This biosurfactant extract was obtained from corn steep liquor, a secondary stream of the corn wet-milling industry. The biosurfactant extract is composed of natural polymers and biocompounds released during the spontaneous fermentation of corn kernels during the steeping process of corn. The reason for this study is based on the importance of colour as a visual attribute that can determine the consumer's preferences; it is important to study the effect of the biosurfactant extract under evaluation before including it in juice matrices. For this, a surface response factorial design was employed and the effects of the biosurfactant extract concentration (0-1 g/L), the storage time (1-7 days), and the conservation temperature (4-36 °C) on the CIELAB colour parameters (L*, a*, b*) of the juice matrices were evaluated, as well as the total colour differences (ΔE*) regarding the control juices and the saturation index (Cab*). Moreover, the CIELAB coordinates of each conducted treatment were converted into RGB values to obtain visual colour differences that can be appreciated by testers or consumers.

Microbial Biosurfactant as an Alternate to Chemical Surfactants for Application in Cosmetics Industries in Personal and Skin Care Products: A Critical Review

Cosmetics and personal care items are used worldwide and administered straight to the skin. The hazardous nature of the chemical surfactant utilized in the production of cosmetics has caused alarm on a global scale. Therefore, bacterial biosurfactants (BS) are becoming increasingly popular in industrial product production as a biocompatible, low-toxic alternative surfactant. Chemical surfactants can induce allergic responses and skin irritations; thus, they should be replaced with less harmful substances for skin health. The cosmetic industry seeks novel biological alternatives to replace chemical compounds and improve product qualities. Most of these chemicals have a biological origin and can be obtained from plant, bacterial, fungal, and algal sources. Various biological molecules have intriguing capabilities, such as biosurfactants, vitamins, antioxidants, pigments, enzymes, and peptides. These are safe, biodegradable, and environmentally friendly than chemical options. Plant-based biosurfactants, such as saponins, offer numerous advantages over synthetic surfactants, i.e., biodegradable, nontoxic, and environmentally friendly nature. Saponins are a promising source of natural biosurfactants for various industrial and academic applications. However, microbial glycolipids and lipopeptides have been used in biotechnology and cosmetics due to their multifunctional character, including detergency, emulsifying, foaming, and skin moisturizing capabilities. In addition, some of them have the potential to be used as antibacterial agents. In this review, we like to enlighten the application of microbial biosurfactants for replacing chemical surfactants in existing cosmetic and personal skincare pharmaceutical formulations due to their antibacterial, skin surface moisturizing, and low toxicity characteristics.

Effect of a Multifunctional Biosurfactant Extract Obtained from Corn Steep Liquor on Orange and Apple Juices

Biosurfactant extracts are multifunctional ingredients composed of natural polymers that can be used in the food industry as stabilizing and antimicrobial agents, although their inclusion in food matrices has been scarcely explored. In this work, a biosurfactant extract, with antimicrobial properties, obtained from a fermented stream of the corn wet-milling industry was introduced into an apple and orange juice matrix to evaluate the changes produced in the sugar consumption, pH, and biomass formation at different temperatures (4-36 °C) and storage time (1-7 days). It was observed that the addition of biosurfactant extract reduced the hydrolysis rate of polymeric sugars, decreasing the concentration of soluble sugars from 85.4 g/L to 49.0 g/L in apple juice after 7 days at 20 °C in the absence and presence of biosurfactant extract, respectively. In general, soluble sugars increased in juices for 5-6 days and after those sugars decreased at different rates depending on the temperature of storage. Differences in sugar solubilization and degradation were more significant in apple juice than in orange juice at 20 °C and 7 days of storage, achieving for orange juice values of 101 and 102 g/L in the absence and presence of biosurfactant extract, respectively. Biomass growth was almost unaffected by the biosurfactant extract concentration and the optimal conditions for biomass production were detected at intermediated temperatures after 6-7 days of storage for both apple and orange juices, obtaining maximum concentrations of 1.68 g/L and 1.54 g/L for apple juice and orange juice, respectively, in the absence of biosurfactant extract. The pH during storage was kept in the range of 3.35-3.48 for apple juice and of 3.40-3.77 for orange juice.

Corn Steep Liquor: Green Biological Resources for Bioindustry

Corn steep liquor (CSL) is a by-product of the wet milling process and contains mostly crude proteins, amino acids, minerals, vitamins, reducing sugars, organic acids, enzymes and other nutrients. The concentration of organic matter in the CSL is high and the yield is large. If directly discharged into the integrated wastewater treatment system, the load and cost of wastewater treatment will be greatly increased. On the other hand, most of the organic matter in the CSL is a valuable resource that can be reused and recovered, and has a significant resource potential. How to develop and utilize CSL has become a major problem faced by enterprises and society. In recent years, people have done a lot of research on the comprehensive utilization of CSL. CSL is commonly used as an inexpensive source of nitrogen, carbon or vitamins in the production of glutamate, antibiotics, lactic acid and other biotechnologies. This article reviews the active ingredients of CSL and their analytical methods, as well as its use for microbial culture medium, low-cost animal feed, biosurfactant, and biostimulant.

Revealing the effect of lipopeptide on improving the probiotics characteristics: Flavor and texture enhancer in the formulated yogurt

Probiotics are beneficial viable microorganisms that protects from pathogens, enhance immunity and health. In this study, a biosurfactant from marine sponge associated bacteria MS48 was used to effectively enhance the survival of starter cultures and thereby improving their functional properties. The biosurfactant MS48 was characterized as lipopeptide based upon the spectroscopic analysis. The GC-MS analysis showed the moiety as l-glutamic acid methyl ester with the mass of m/z 161.16. Probiotics supplemented with lipopeptide showed better survival in the stress tolerance assays includes acid, bile, heat, salt stress and other assays including auto-aggregation, hydrophobicity, microbial adhesion to solvents (MATS), and simulated gastric juice. Yogurt formulated using lipopeptide showed enhanced flavor components, stability, improved characteristics, EPS production, and lower syneresis than the control. Malonic acid, acidity regulator was detected in the mass spectrum of lipopeptide added yogurt. The texture analysis of the lipopeptide added yogurt showed improved textural and sensorial properties when compared to the control.

Optimized pulsed electric field-assisted extraction of biosurfactants from Chubak (Acanthophyllum squarrosum) root and application in ice cream

BACKGROUND

In this study, a face-centered central composite design was applied to optimize pulsed electric field parameters (voltage: 1, 4, 7 kV cm^-1 ; pulse number: 10, 65, 120) for the extraction of natural saponins from Chubak root. Data analysis showed that increasing the voltage from 1 to 4 kV cm^-1 and pulse number from 10 to 65 increased foaming ability (FA) and emulsion stability, and decreased foam density (FD), foam stability (FS) and lightness, due to the improved extraction of saponins.

RESULTS

Whereas, an opposite trend was observed for FA, FD and FS on increasing the voltage from 4 to 7 kV cm^-1 as a result of more impurities being extracted. Furthermore, the Chubak root extract (CRE) (0, 1.5, 3.0 and 4.5 g kg^-1 ) obtained under the optimized conditions (voltage of 6.4 kV cm^-1 and pulse number of 80) was used in ice cream formulation because of its ability to reduce surface tension. Based on the results, the samples containing higher amounts of CRE showed higher viscosity, consistency coefficient, overrun, melting resistance and creaminess, as well as lower values of flow behavior index, hardness, adhesiveness, coarseness and coldness. This could be related to the increased water retention, improved whipping ability, greater fat destabilization and smaller ice crystals. Although more bitterness was perceived as a result of an increase in the level of CRE, it had no negative effect on the overall acceptance assessed by trained sensory panelists.

CONCLUSIONS

The results of this study briefly support the conclusion that CRE has a very high potential for use as a foaming, emulsifying and stabilizing agent to improve the quality of ice cream. © 2020 Society of Chemical Industry.

Synthetic and Bio-Derived Surfactants Versus Microbial Biosurfactants in the Cosmetic Industry: An Overview

This article includes an updated review of the classification, uses and side effects of surfactants for their application in the cosmetic, personal care and pharmaceutical industries. Based on their origin and composition, surfactants can be divided into three different categories: (i) synthetic surfactants; (ii) bio-based surfactants; and (iii) microbial biosurfactants. The first group is the most widespread and cost-effective. It is composed of surfactants, which are synthetically produced, using non-renewable sources, with a final structure that is different from the natural components of living cells. The second category comprises surfactants of intermediate biocompatibility, usually produced by chemical synthesis but integrating fats, sugars or amino acids obtained from renewable sources into their structure. Finally, the third group of surfactants, designated as microbial biosurfactants, are considered the most biocompatible and eco-friendly, as they are produced by living cells, mostly bacteria and yeasts, without the intermediation of organic synthesis. Based on the information included in this review it would be interesting for cosmetic, personal care and pharmaceutical industries to consider microbial biosurfactants as a group apart from surfactants, needing specific regulations, as they are less toxic and more biocompatible than chemical surfactants having formulations that are more biocompatible and greener.

Characterization and Cytotoxic Effect of Biosurfactants Obtained from Different Sources

In this work, five biosurfactant extracts, obtained from different sources, all of them with demonstrated antimicrobial properties, were characterized and subjected to a cytotoxic study using mouse fibroblast cells (NCTC clone 929). Biosurfactant extracts obtained directly from corn steep water (CSW) showed similar surfactant characteristics to those of the extracellular biosurfactant extract produced by Bacillus isolated from CSW and grown in tryptic soy broth, observing that they are amphoteric, consisting of viscous and yellowish liquid with no foaming capacity. Contrarily, cell-bound biosurfactant extracts produced from Lactobacillus pentosus or produced by Bacillus sp isolated from CSW are nonionic, consisting of a white powder with foaming capacity. All the biosurfactants possess a similar fatty acid composition. The cytotoxic test revealed that the extracts under evaluation, at a concentration of 1 g/L, were not cytotoxic for fibroblasts (fibroblast growth > 90%). The biosurfactant extract obtained from CSW with ethyl acetate, at 1 g/L, showed the highest cytotoxic effect but above the cytotoxicity limit established by the UNE-EN-ISO10993-5. It is remarkable that the cell-bound biosurfactant produced by L. pentosus, at a concentration of 1 g/L, promoted the growth of the fibroblast up to 113%.

Can a Corn-Derived Biosurfactant Improve Colour Traits of Wine? First Insight on Its Application during Winegrape Skin Maceration versus Oenological Tannins

In winemaking, oenological tannins are used to preserve wine colour by enhancing the antioxidant activity, taking part in copigmentation, and forming polymeric pigments with anthocyanins. As a novel processing aid, in this study, a biosurfactant extract was evaluated as a solubilizing and stabilizing agent of anthocyanins in red wine. The biosurfactant extract under evaluation was obtained from a fermented residual stream of the corn milling industry named corn steep liquor (CSL). Two red winegrape varieties (Vitis vinifera L. cv. Aglianico and Cabernet sauvignon) were studied for anthocyanin content and profile, and colour traits, during simulated skin maceration for 7 days at 25 °C, as well as polymerization and copigmentation at the end of maceration. A model wine solution was used as a control, which was added either with the CSL biosurfactant or with four different oenological tannins (from grape skin, grape seed, quebracho, and acacia). The results showed that CSL biosurfactant addition improved the colour properties of skin extracts by the formation of more stable compounds mainly through copigmentation interactions. These preliminary results highlighted that the effectiveness of CSL biosurfactant is variety-dependent; however, there is no significant protection of individual anthocyanin compounds as observed for delphinidin and petunidin forms using quebracho tannin.

Characterization of extracellular and cell bound biosurfactants produced by Aneurinibacillus aneurinilyticus isolated from commercial corn steep liquor

The presence of biosurfactants produced by a Bacillus strain in corn steep liquor (CSL), a wastewater stream of the corn milling process, has been recently discovered. However, the species responsible for their production has not been identified at the moment. Therefore, in this work, the Bacillus strain isolated from CSL, with capacity to produce biosurfactants, was subjected to amplification and sequence analysis of the 16S rRNA, being identified as Aneurinibacillus aneurinilyticus. This strain has been proved to be endospore forming and thermophile, what would explain its presence in the commercial CSL. It was observed that the strain under evaluation has the ability to produce both cell-bound and extracellular biosurfactant extracts, which were characterized in this work. The electrospray ionization mass spectrometry (ESI) analysis of the biosurfactant extracts revealed that the extracellular biosurfactant produced by Aneurinibacillus aneurinilyticus is composed by a mixture of lipopeptides, containing C16 and C18 fatty acids and amino acids, including valine, phenylalanine, proline, cysteine, histidine, aspartic acid/asparagine, alanine, glycine, leucine/isoleucine, with biomarkers between 1025-458 m/z. Conversely, the cell-bound biosurfactant extract produced by Aneurinibacillus aneurinilyticus was composed by the cyclic decapeptide gramicidin S, with a characteristic peak at 571 m/z, and lipopeptides with characteristic peaks between 1034-705 m/z, containing alanine, glycine, cysteine, serine, proline, aspartic acid/asparagine, similarly to the amino acid sequence of the extracellular biosurfactant extract.

Fungistatic and Fungicidal Capacity of a Biosurfactant Extract Obtained from Corn Steep Water

Biosurfactants are surface-active compounds that are produced by microorganisms, which in addition to their surfactant capacity, can possess interesting antimicrobial activities that are used in their incorporation into the agrifood industry. In this work, the preservative capacity of a novel biosurfactant extract obtained from a residual stream of the corn-milling industry was evaluated against two different fungi (Aspergillus brasiliensis and Candida albicans) under different biosurfactant concentrations (0.33–0.99 mg/mL), temperatures (4–40 °C), and incubation times (5–11 days). All the assays started with the same concentration of fungi (2 × 10⁶ CFU/mL). The results showed that temperature played an important role in the bactericidal and fungistatic effects of this biosurfactant extract. It was observed that at a low biosurfactant concentration (0.33 mg/mL) and low or high temperatures in the range tested, this biosurfactant extract possessed an important fungicidal effect (complete inhibition) on A. brasiliensis, while at intermediate temperatures, it achieved a fungistatic effect (50% of inhibition). Regarding C. albicans, it was observed that this strain was more resistant than A. brasiliens, although it was possible to achieve growth inhibitions of 76.3% at temperatures of 40 °C after 8 days of incubation with a biosurfactant concentration of 0.99 mg/mL. This work supports the possible application of biosurfactants extracted from corn steep water as preservatives and antimicrobial agents against fungal contaminations on agrifood products.

Study of biosurfactant extract from corn steep water as a potential ingredient in antiacne formulations

Background: This is a novel work that includes the use of a biosurfactant extract obtained from corn milling industry (named BS-CSW), with antimicrobial activity, as ingredient in formulations to treat acne vulgaris. Methodology: With this purpose, it was established an incomplete experimental design with 3 independent variables, based on the concentration of non-nano zinc oxide (ZnO) (0-2%), BS-CSW (0-5%) and salicylic acid (0-2%). Results: This design allowed to obtain a theoretical model that calculates the inhibitory effect on Cutibacterium acnes (also named Propionibacterium acnes) for any formulation carried with the ingredients appointed before. It was observed a clear synergetic effect on the inhibition of C. acnes between ZnO and BS-CSW, in absence of salicylic acid. This fact allowed to reduce the concentration of ZnO, giving more ecofriendly and biocompatible formulations. Conclusions: It was observed that the biosurfactant extract, in formulations with intermediate concentration of ZnO (1%), possess an inhibitory effect on C. acnes considerably higher than ZnO alone and similar to ZnO (1%) with salicylic acid (1%). This fact demonstrates the enormous potential of this bioactive extract in antiacne formulations.

A Multifunctional Biosurfactant Extract Obtained from Corn Steep Water as Bactericide for Agrifood Industry

The increase of crop production along with stricter requirements on food security have augmented the demand of new and eco-friendly bactericides. Most of the bactericides used at the moment consist of persistent organic substances, representing a risk for environmental and human health. For instance, agriculture bactericides used for crop protection includes copper-based, dithiocarbamate and amide bactericides, which are not biodegradable, resulting in the necessity of further research about the production of new active principles that attack microorganisms without producing any harmful effect on human health or environment. The biosurfactant extract evaluated in this work as a bactericide, is obtained from corn steep water, a residual stream of corn wet milling industry, which is fermented spontaneously by probiotic lactic acid bacteria that possess the capacity to produce biosurfactants. In previous works, it has been demonstrated that this biosurfactant extract is able to promote the growth of Lactobacillus casei in drinkable yogurts, though its antimicrobial activity against pathogenic strains has not been evaluated at the moment. The results obtained in this work have proved that this biosurfactant extract is effective as bactericide against Pseudomonas aeruginosa and Escherichia coli, at concentrations of 1 mg/mL, opening the door to its use in agrifood formulations for reducing the use of chemical pesticides and preservatives.

Preservative and Irritant Capacity of Biosurfactants From Different Sources: A Comparative Study

One of the most important challenges for pharmaceutical and cosmetic industries is solubilization and preservation of their active ingredients. Therefore, most of these formulations contain irritant chemical additives to improve their shelf-life and the solubility of hydrophobic ingredients. An interesting alternative to chemical surfactants and preservatives is the use of biosurfactants; thus, their surfactant properties and composition make them more biocompatible than their chemical counterparts. Moreover, some biosurfactants have shown antimicrobial activity in addition to their detergent capacity. In this work, the antimicrobial and irritant effect of 2 biosurfactant extracts was studied: one produced in a controlled fermentation process with Lactobacillus pentosus and the other produced from corn stream by spontaneous fermentation. The results showed a strong antimicrobial activity of the biosurfactant extract obtained from corn stream on pathogenic bacteria, in comparison with the L. pentosus biosurfactant extract. Moreover, both biosurfactants did not produce any irritant effect on the chorioallantoic membrane of hen's egg assay contrary to sodium dodecyl sulfate. This is the first study dealing with the application of biosurfactant extracts on sensitive biological membranes, and this is the first time that the preservative capacity of a biosurfactant extract obtained in spontaneous fermentation is being evaluated, achieving promising results.

The effect of the presence of biosurfactant on the permeation of pharmaceutical compounds through silicone membrane

The permeation of ten model drugs through silicone membrane was analysed to investigate the effect of the presence of a biosurfactant obtained from corn steep liquor. The ten selected pharmaceutical compounds were chosen to include a diverse range of physicochemical properties, such as variable hydrophobicities, pKa's, molecular masses and degrees of ionisation. When compared with compound permeation alone, the additional inclusion of biosurfactant in the donor phase altered the rate and extent of permeation. It significantly enhanced permeation for five of the compounds, whereas it decreased permeation for four of the compounds and remained approximately the same for the tenth compound. These effects were observed at both biosurfactant concentrations considered, namely 0.005 mg/mL, i.e. below the critical micellar concentration (CMC) and 0.500 mg/mL, i.e. above the CMC of the biosurfactant. Upon analysing permeation change with respect to physicochemical properties of the compounds, it was determined that compounds with a relative molecular mass below 200 resulted in an increase in permeation with biosurfactant present, and those above 200 resulted in a decrease in permeation with biosurfactant present. This effect was therefore attributed to the formation of a drug-biosurfactant interaction that enhanced permeation of smaller compounds, yet retarded permeation for those with a higher molecular mass. These in vitro findings can be considered an indication of potential novel formulation options that incorporate biosurfactant to create transdermal products that have bespoke permeation profiles.