Simultaneous production of commercial enzymes using agro industrial residues by statistical approach

Exo-polygalacturonase production enhancement by Piriformospora indica from sugar beet pulp under submerged fermentation using the response surface methodology

This study proposed a novel and cost-effective approach to enhance and optimize the exo-polygalacturonase from P. indica, a root endophytic fungus. In the current investigation, the impact of ammonium sulfate, sugar beet pulp (SBP), and glucose as variables on induction of exo-polygalacturonase from P. indica was optimized using the central composite design (CCD) of response surface methodology (RSM) under submerged fermentation (SmF). Additionally, determination of the exo-polygalacturonase molecular weight and in situ analysis was performed. The optimal reaction conditions, which resulted in the highest enzyme activity, were observed in the following conditions: ammonium sulfate (4 g/L), SBP (20 g/L), and glucose (60 g/L). Under the optimized condition, the maximum enzyme activity reached 19.4 U/ml (127 U/mg), which increased by 5.84 times compared to non-optimized conditions. The exo-polygalacturonase molecular weight was estimated at 60 KDa. In line with the bioinformatic analysis, the exo-polygalacturonase sequence of P. indica showed similarity with Rhizoctonia solani's and Thanateporus cucumeris. These results indicated that SBP acts as a cheap and suitable inducer of exo-polygalacturonase production by P. indica in submerged cultivation. The outcome of this study will be useful for industries to decrease environmental pollution with cost-effective approaches.

Agro-Industrial Wastes: A Substrate for Multi-Enzymes Production by Cryphonectria parasitica

This study aims to produce a mix of enzymes through Solid State Fermentation (SSF) of raw materials. Four different, easily available, agro-industrial wastes were evaluated as SSF substrates for enzymes production by Cryphonectria parasitica (Murr.) Barr. environmental strains named CpA, CpB2, CpC4, and CpC7. Among the tested wastes, organic wheat bran for human use and wheat bran for animal feed better supports C. parasitica growth and protease production without any supplements. SDS-PAGE analyses highlighted the presence of three bands corresponding to an extracellular laccase (77 kDa), to the endothiapepsin (37 kDa), and to a carboxylesterase (60.6 kDa). Protease, laccase, and esterase activities by C. parasitica in SSF were evaluated for 15 days, showing the maximum protease activity at day 9 (3955.6 AU/gsf,). Conversely, the best laccase and esterase production was achieved after 15 days. The C. parasitica hypovirulent CpC4 strain showed the highest laccase and esterase activity (93.8 AU/gsf and 2.5 U/gsf, respectively). These results suggest the feasibility of a large-scale production of industrially relevant enzymes by C. parasitica strains in SSF process on low value materials.

A Review of the Effects and Production of Spore-Forming Probiotics for Poultry

Simple Summary

Spore-forming probiotics are widely used in the poultry industry for their beneficial impact on host health. The main feature that separates spore-forming probiotics from the more common lactic acid probiotics is their high resistance to external and internal factors, resulting in higher viability in the host and correspondingly, greater efficiency. Their most important effect is the ability to confront pathogens, which makes them a perfect substitute for antibiotics. In this review, we cover and discuss the interactions of spore-forming probiotic bacteria with poultry as the host, their health promotion effects and mechanisms of action, impact on poultry productivity parameters, and ways to manufacture the probiotic formulation. The key focus of this review is the lack of reproducibility in poultry research studies on the evaluation of probiotics’ effects, which should be solved by developing and publishing a set of standard protocols in the professional community for conducting probiotic trials in poultry.

Abstract

One of the main problems in the poultry industry is the search for a viable replacement for antibiotic growth promoters. This issue requires a “one health” approach because the uncontrolled use of antibiotics in poultry can lead to the development of antimicrobial resistance, which is a concern not only in animals, but for humans as well. One of the promising ways to overcome this challenge is found in probiotics due to their wide range of features and mechanisms of action for health promotion. Moreover, spore-forming probiotics are suitable for use in the poultry industry because of their unique ability, encapsulation, granting them protection from the harshest conditions and resulting in improved availability for hosts’ organisms. This review summarizes the information on gastrointestinal tract microbiota of poultry and their interaction with commensal and probiotic spore-forming bacteria. One of the most important topics of this review is the absence of uniformity in spore-forming probiotic trials in poultry. In our opinion, this problem can be solved by the creation of standards and checklists for these kinds of trials such as those used for pre-clinical and clinical trials in human medicine. Last but not least, this review covers problems and challenges related to spore-forming probiotic manufacturing.

Valorization of agro-industrial wastes by producing 2-phenylethanol via solid-state fermentation: Influence of substrate selection on the process

2-phenylethanol (2-PE) is a value-added compound widely used in industry due to its rose-like odor and antibacterial properties that can be bioproduced using wastes as raw materials. This study presents the valorization of nine agro-industrial wastes as potential substrates for 2-PE production using an isolated 2-PE producer Pichia kudriavzevii, and the solid-state fermentation (SSF) technology as an alternative approach. The assessed substrates comprised wastes of varied traits such that each of them provided different characteristics to the fermentation. Thus, by using a principal component analysis (PCA), it was possible to identify the most significant characteristics associated with the substrates affecting the 2-PE production. Results show that L-phenylalanine biotransformation was more efficient than de novo synthesis for producing 2-PE. Besides, from the evaluated set, the maximum 2-PE production was achieved with red apple pomace, reaching 1.7 and 25.2 mg_2PE per gram of used waste through de novo and L-phenylalanine biotransformation, respectively. In that scenario, volumetric productivity and precursor yield were 39.6 mg_2PE L^-1h^-1 and 0.69 g_2PE per gram of L-phenylalanine added_, respectively. From the PCA, it was identified that the reducing sugars content of the substrate, the air-filled porosity of the bed and the L-phenylalanine availability were the most critical parameters (associated with the substrates) influencing the microbial activity and 2-PE production. These results suggest that the desirable traits a solid media needs for promoting 2-PE production via SSF could be reached by using a combination of wastes in a synergistic approach.

Characterisation of pectin and optimization of pectinase enzyme from novel Streptomyces fumigatiscleroticus VIT-SP4 for drug delivery and concrete crack-healing applications: An eco-friendly approach

Pectinases are enzymes which are widely distributed in microbes that are present in pectin enriched sites. The agro-industrial residues can be utilized in the industrial scale for low-cost and efficient pectinase production in an eco-friendly approach. This study employs low-cost substrates (i.e. culinary fruit peels) for maximum pectinase production from novel Streptomyces fumigatiscleroticus VIT-SP4. The extraction and characterization of pectin from different fruit peels were investigated and pectinase activity was analyzed. The orange pectin gave maximum pectinase activity of about 45.93 (U/mL). Further, statistical optimization of process parameters was studied by using Taguchi method showed optimum values of pH-6, temperature −35 °C, orange pectin% − 2.5, incubation time- 48 h and RPM- 200 rpm and pectinase activity was found to be 98.65 (U/mL). The response surface methodology (RSM) was used for the optimization of media components which revealed that starch −1.17%, yeast extract-2%, and orange pectin% − 0.75% produces maximum pectinase of about 170.05 (U/mL). The drug-delivery study showed drug release was not observed at initial pH 3 after 4 h. The immediate drug release was noted at pH 6 caused due to disintegration of pectin by the pectinase activity. The self-healing of cracks by spray culture technique was investigated. The crack healing was observed up to 0.50 mm wide after 12 days. This confirms the ability of actinomycete spores to survive and they react to form calcite complex directly helps in crack healing process. This low-cost microbial pectinase can be used in drug delivery and concrete crack-healing applications sectors in future.