Sterol-based oleogels' characterization envisioning food applications

Formation, characterization, and application of natural bioactive phytosterol-based oleogels: A review

Oleogels are innovative structured fat systems that can replace detrimental lipids and saturated fats. Among the various gelators used to construct oleogels, phytosterols are regarded as potential oleogelators due to ability to lower blood cholesterol levels and protect patients from cardiovascular illnesses, although little research has been conducted on phytosterols. This article examines the formation, characterization, and application of phytosterol-based oleogels in detail. The oleogelation behaviors of phytosterol-based oleogels are affected by their formulation, which includes phytosterol type, combined oleogelator, proportion, concentration and oil type. These oleogels exhibit potential applications as solid fat substitutes without affecting the texture or sensory properties of food products or as effective delivery vehicles. To encourage the research and implementation of phytosterol-based oleogels, we will ultimately not only highlight problems related to their use in food processing, but also provide a few viewpoints, with the goal of providing fresh insights for advancing trends.

Effect of different gelators on the physicochemical properties and microstructure of coconut oleogels

BACKGROUND

The inherent properties of coconut oil (CO), including its elevated saturated fatty acid content and low melting point, make it suitable for application in plastic fat processing. The present study explores the physicochemical characteristics, micromorphology and oxidative stability of oleogels produced from CO using various gelators [ethylcellulose (EC), β-sitosterol/γ-oryzanol (PS) and glyceryl monostearate (MG)] to elucidate the formation mechanisms of coconut oleogels (EC-COO, PS-COO and MG-COO).

RESULTS

Three oleogel systems exhibited a solid-like behavior, with the formation of crystalline forms dominated by β and β'. Among them, PS-COO exhibited enhanced capability with respect to immobilizing liquid oils, resulting in solidification with high oil-binding capacity, moderate hardness and good elasticity. By contrast, MG-COO demonstrated inferior stability compared to PS-COO and EC-COO. Furthermore, MG-COO and PS-COO demonstrated antioxidant properties against CO oxidation, whereas EC-COO exhibited the opposite effect. PS-COO and EC-COO exhibited superior thermodynamic behavior compared to MG-COO.

CONCLUSION

Three oleogels based on CO were successfully prepared. The mechanical strength, storage modulus and thermodynamic stability of the CO oleogel exhibited concentration dependence with increasing gelling agent addition. PS-COO demonstrated relatively robust oil-binding capacity and oxidative stability, particularly with a 15% PS addition. This information contributes to a deeper understanding of CO-based oleogels and offers theoretical insights for their application in food products. © 2024 Society of Chemical Industry.

Synergistic formulation approach for developing pea protein and guar gum enriched olive oil-in-water emulsion gels as solid fat substitutes: Formulation optimization, characterization, and molecular simulation

This study aimed to optimize the formulation of olive oil-in-water (O/W) emulsion gels by incorporating Pea Protein (PP) and Guar Gum (GG) as alternative options for solid fats. The optimum rheological (consistency index, apparent viscosity, recovery) and texture (firmness) properties of the emulsion gels were obtained using a mixture of 2 % PP, 1 % GG, 60 % Olive Oil (OO), and 37 % Water (W). The blend of PP2/GG1 showed the highest results for recovery and firmness, 111.27 % and 33.89 g, respectively. PP/GG blend emulsion gels exhibited higher absolute ζ-potential values, ranging between -72.3 and -77.4 mV. The polydispersity index (PDI) ranged from 0.185 to 0.535, with the most uniform distributions found in the PP/GG blend emulsion gels. Strong phase separation resistance indicated strong stability of PP-GG complex emulsion gels. Higher PP concentrations decreased emulsion oxidation. FTIR and XRD research showed that PP and GG interact strongly, indicating good compatibility. The free binding energy of the most stable configuration of the molecules was -6.8 kcal mol-1, indicating a high affinity. PP interacted with GG through 9 amino acid residues, with notable residues being Asp 224, Thr 235, Ala 332, Ile 334, and Arg 336, and their respective interaction distances ranged between 2.69 Å and 3.87 Å.

Effects of different oleogelators on the structural properties and composition of iron walnut-oil oleogels

In this study, we compared the quality of iron walnut oil (IWO) oleogels prepared with different oleogelators, including γ-oryzanol/β-sitosterol (OZ-PS), γ-oryzanol/triglyceride (OZ-TC), monoglycerides (MGS), beeswax (BW), beeswax-monoglycerides (BW-MGS), and carnauba wax (CW). The physicochemical and component properties, rheological and textural parameters, macroscopic morphologies, and antioxidant capacities of the resulting oleogels were analyzed. In addition, their microscopic properties were analyzed using Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD) spectroscopy, and polarized light microscopy (PLM). The results showed that the gel structures produced by different oleogelators did not change the fatty acid composition of IWO. In addition, the IWO oleogel prepared with OZ-PS had a more stable network structure, excellent hardness at 4℃ (1116.51 g), better antioxidant capacity (766.50 μmol TE/kg) and higher total phenolic content (14.98 mg/kg) than any other experimental IWO oleogels. Moreover, comprehensive ranking by principal component analysis of numerous characteristics showed that the OZ-PS oleogel (2.533) ranked first among the six oleogels studied. Therefore, the IWO oleogel prepared with OZ-PS is a promising product, and our results provide guidance for the preparation of IWO oleogels, such as to increase their applications in the food industry.

Towards the development of novel bicomponent phytosterol-based oleogels with natural phenolics

Structuring liquid oils into edible oleogels from natural and abundant plant ingredients has great significance in fields ranging from foods to pharmaceuticals but has proven challenging. Herein, novel bicomponent phytosterol-based oleogels were developed with natural phenolics. Investigating diverse natural phenolics, cinnamic acid (CA) and ethyl ferulate (EF) successfully formed oleogels in combination with phytosterols (PS), where a synergistic effect on the oleogelation and crystallization was observed compared to the corresponding single component formulations. FTIR and UV-vis spectra showed that the gel network was primarily driven by hydrogen bonding and π-π stacking. Furthermore, oscillatory shear demonstrated oleogels featured higher elastic and network structure deformation at molar ratio of 5:5 and 3:7. Moreover, the bicomponent phytosterol-based oleogels displayed partially reversible shear deformation and a reversible solid-liquid transition. Such information was useful for engineering the functional properties of oleogel-based lipidic materials, providing significance for the application in foods, cosmetics and pharmaceuticals industries.

Preparation of Citral Oleogel and Antimicrobial Properties

The objective of this study was to analyze a natural and safe oleogel with antimicrobial properties that can replace animal fats while lengthening the product's shelf life. The oleogel was created using direct dispersion (MG-SO), and its material characterization exhibited the exceptional performance of the hybrid gelant. Additionally, citral was integrated into the oil gel to prepare the citral oleogel (MG-SO). The antimicrobial nature of the material was examined and the findings revealed that it inhibited the growth of various experimental model bacteria, including Escherichia coli, Staphylococcus aureus, Aspergillus niger, Botrytis cinerea, and Rhizopus stolonifer. In addition, the material had a comparable inhibitory impact on airborne microorganisms. Lastly, MG-SON was utilized in plant-based meat patties and demonstrated an ability to significantly reduce the growth rate of microorganisms.

A review of different frying oils and oleogels as alternative frying media for fat-uptake reduction in deep-fat fried foods

Purpose

This review aims to examine the potential of oleogels as a frying medium to decrease oil absorption during deep-frying and enhance the nutritional and energy content of foods. By investigating the factors influencing oil incorporation during deep-frying and examining the application of oleogels in this process, we seek to provide insights into using oleogels as an alternative to traditional cooking oils.

Scope

Deep-frying, a widely used cooking method, leads to the retention of large amounts of oil in fried food, which has been associated with health concerns. To address this issue, researchers have investigated various methods to minimize oil absorption during frying. One promising approach is the use of oleogels, which are thermo-reversible, three-dimensional gel networks formed by entrapment of bulk oil with a low concentration (<10% of weight) of solid lipid materials known as oleogelators. This review will focus on the following aspects: a) an overview of deep-fried foods, b) factors influencing oil uptake and underlying mechanisms for oil absorption during deep-frying, c) the characterization and application of different frying oils and their oleogels in deep-fried foods, d) components of the oleogel system for deep-frying, and e) the health impact, oxidative stability, and sensory acceptability of using oleogels in deep-frying.

Key findings

The review highlights the potential of oleogels as a promising alternative frying medium to reduce fat absorption in deep-fried foods. Considering the factors influencing oil uptake during deep-frying, as well as exploring the properties and applications of different frying oils and their oleogels, can result in improved product qualities and heightened consumer acceptance. Moreover, oleogels offer the advantage of lower fat content in fried products, addressing health concerns associated with traditional deep-frying methods. The capacity to enhance the nutritional and energy profile of foods while preserving sensory qualities and oxidative stability positions oleogels as a promising choice for upcoming food processing applications.

Role of the polyphenol content on the structuring behavior of liposoluble gelators in extra virgin olive oil

The role of polyphenols in affecting the structural and rheological properties of oleogels was investigated. Polyphenols were selectively removed from extra virgin olive oil (EVOO), and the resulting oils at three different polyphenol levels were gelled by using 10% (w/w) of monoglycerides (MG), rice wax (RW), sunflower wax (SW), and a mixture of β-sitosterol/γ-oryzanol (PS). The structural characteristics of oleogels were assessed by visual appearance, rheology, polarized light microscopy, calorimetry, XRD, and FTIR. Polyphenol content differently affected oleogel characteristics depending on network features. While EVOO-polyphenols did not influence PS- and SW-based oleogels, they reinforced MG- and RW-based oleogel network. As polyphenol content increased, the critical stress and melting temperature also increased, concomitantly with changes in crystal morphology. This was attributed to the capacity of polyphenols to form additional junction points in the crystalline network.

Ultrasonic Treatment of Food Colloidal Systems Containing Oleogels: A Review

The use of oleogels as an alternative to solid fats to reduce the content of saturated and trans-isomeric fatty acids is a developing area of research. Studies devoted to the search for methods of obtaining oleogels with given properties are of current interest. Ultrasonic treatment as a method for modifying oleogel properties has been used to solve this problem. The number of publications on the study of the effect of ultrasonic treatment on oleogel properties is increasing. This review aimed to systematize and summarize existing data. It allowed us to identify the incompleteness of this data, assess the effect of ultrasonic treatment on oleogel properties, which depends on various factors, and identify the vector of this direction in the food industry. A more detailed description of the parameters of ultrasonic treatment is needed to compare the results between various publications. Ultrasonic treatment generally leads to a decrease in crystal size and an increase in oil-binding capacity, rheological properties, and hardness. The chemical composition of oleogels and the concentration of gelators, the amplitude and duration of sonication, the cooling rate, and the crystallization process stage at which the treatment occurs are shown to be the factors influencing the efficiency of the ultrasonic treatment.

Variations in Microstructural and Physicochemical Properties of Soy Wax/Soybean Oil-Derived Oleogels Using Soy Lecithin

Emerging natural-based polymers and materials progress and new technology innovations open the way for unique food products with high nutritional value development. In this regard, oleogel may be essential in replacing fatty acids from food products. In this study, we researched the effects of varied soy lecithin (SYL) concentrations on the various physicochemical characteristics of soy wax (SW)/refined soybean oil (RSO) oleogels. These oleogels had a soft texture. The microscopic analysis of the oleogels suggested that the thickness, length, and density of the wax crystals (needle-shaped) varied as the SYL content was changed. Colorimetric analysis indicated that the oleogels were slightly yellowish. FTIR spectrometry helped analyze the functional groups of the raw materials and the oleogels. All the functional groups present in the raw materials could be accounted for within the oleogels. The only exception is the hydrogen-bonding peak in SW, which was not seen in the FTIR spectrum of the oleogels. It was found that at a critical SYL content, the oleogel showed a stable and repeatable wax network structure. This can be described by the presence of the uniformly distributed fat crystal network in the sample. The DSC analysis revealed that the oleogel samples were thermo-reversible, with their melting and crystallization temperatures ~43 °C and ~22 °C, respectively. In gist, it can be concluded that the incorporation of SYL can impact the color, wax crystal network characteristics, thermal characteristics, and mechanical characteristics of the oleogels in a composition-dependent manner.

Synergistic effects of oleogelators in tailoring the properties of oleogels: A review

Conventional solid fats play a crucial role as an ingredient in many processed foods. However, these fats contain a high amount of saturated fats and trans fats. Legislations and dietary recommendations related to these two types of fats set forth as a consequence of evidence showing their deleterious health impact have triggered the attempts to find alternate tailor-made lipids for these solid fats. Oleogels is considered as a novel alternative, which has reduced saturated fat and no trans fat content. In addition to mimicking the distinctive characteristics of solid fats, oleogels can be developed to contain a high amount of polyunsaturated fatty acids and used to deliver bioactives. Although there has been a dramatic rise in the interest in developing oleogels for food applications over the past decade, none of them has been commercially used in foods so far due to the deficiency in their crystal network structure, particularly in monocomponent gels. Very recently, there is a surge in the interest in using of combination of gelators due to the synergistic effects that aid in overcoming the drawbacks in monocomponent gels. However, currently, there is no comprehensive insight into synergism among oleogelators reported in recent studies. Therefore, a comprehensive intuition into the findings reported on synergism is crucial to fill this gap. The objective of this review is to give a comprehensive insight into synergism among gelators based on recent literature. This paper also identifies the future research propositions towards developing oleogels capable of exactly mimicking the properties of conventional solid fats to bridge the gap between laboratory research and the food industry.

Candelilla wax-based oleogels versus palm oil: evaluation of physical properties of innovative and conventional lipids using optical techniques

BACKGROUND

The widespread use of palm oil in food production affects high consumption of long-chain saturated fatty acids, which increases the risk of cardiovascular disease. Solid or semi-solid wax-based oleogels obtained as a result of edible oils structuring can be an alternative.

RESULTS

Oleogels, obtained by structuring a mixture of refined rapeseed and linseed oils (1:1) with 30-80 g kg^-1 candelilla wax (CW), were investigated using optical techniques: multi-speckle diffusing wave spectroscopy, centrifugal stability analysis, reflection method, and polarized light microscopy. Refined palm oil was a comparative sample. Increasing CW concentration resulted in an increase in values of L^* parameter and opacity, a decrease in the Yellowness Index and a slight increase in the average crystal size. The microstructure of oleogels with 30 or 40 g kg^-1 CW was least like the crystal network. Solidification of oleogels took place in two stages. Increase in CW concentration shortened solidification time and increased solidification temperature (greater elasticity of oleogels). Palm oil solidified the longest (497.1 min) and at the lowest temperature (29.3 °C). It showed lower resistance to centrifugal force than oleogels at 20 and 30 °C. All oleogels were stable (no oil release occurred) at 20 °C.

CONCLUSION

Optical methods allow for an objective and detailed analysis of physical properties of palm oil and oleogels, as well as identification and tracking changes at the microstructural level over time. It has great potential in the edible lipid quality control at various stages of processing or storage. © 2021 Society of Chemical Industry.

Production, Characterization, Delivery, and Cholesterol-Lowering Mechanism of Phytosterols: A Review

Phytosterols are natural plant-based bioactive compounds that can lower blood cholesterol levels and help prevent cardiovascular diseases. Consequently, they are being utilized in functional foods, supplements, and pharmaceutical products designed to improve human health. This paper summarizes different approaches to isolate, purify, and characterize phytosterols. It also discusses the hypolipidemic mechanisms of phytosterols and their impact on cholesterol transportation. Phytosterols have a low water-solubility, poor chemical stability, and limited bioavailability, which limits their utilization and efficacy in functional foods. Strategies are therefore being developed to overcome these shortcomings. Colloidal delivery systems, such as emulsions, oleogels, liposomes, and nanoparticles, have been shown to be effective at improving the water-dispersibility, stability, and bioavailability of phytosterols. These delivery systems can be used to incorporate phytosterols into a broader range of cholesterol-lowering functional foods and beverages. We also discuses several issues that need to be addressed before these phytosterol delivery systems can find widespread commercial utilization.

Gelation Behavior and Stability of Multicomponent Sterol-Based Oleogels

Novel fat mimetic materials, such as oleogels, are advancing the personalization of healthier food products and can be developed from low molecular weight compounds such as γ-oryzanol and β-sitosterol. Following molecular assembly, the formation of a tubular system ensues, which seems to be influenced by elements such as the oleogelators' concentration and ratio, cooling rates, and storage periods. Sterol-based oleogels were formulated under distinct environmental conditions, and a comprehensive study aimed to assess the effects of the mentioned factors on oleogel formation and stability, through visual observation and by using techniques such as small-angle X-ray scattering, X-ray diffraction, confocal Raman spectroscopy, rheology, and polarized microscopy. The long, rod-like conformations, identified by small-angle X-ray scattering, showed that different cooling rates influence oleogels' texture. Raman spectra showed that the stabilization time is associated with the interfibrillar aggregation, which occurred differently for 8 and 10 wt%, with a proven relationship between ferulic acid and the tubular formation. This report gives fundamental insight into the critical point of gelation, referring to the time scale of the molecular stabilization. Our results verify that understanding the structuring mechanisms of oleogelation is decisive for the processing and manufacturing of novel foods which integrate oleogels in their structure.

Oleogel-Based Systems for the Delivery of Bioactive Compounds in Foods

Oleogels are semi-solid materials containing a large fraction of liquid oil entrapped in a network of structuring molecules. In the food industry, these formulations can be used to mimic fats and to deliver bioactive compounds. In the last decade, there has been increasing interest in these structures, not only from a scientific point of view, i.e., studying new molecules, methodologies for gelification, and new structures, but also from a technological point of view, with researchers and companies exploring these structures as a way to overcome certain challenges and/or create new and innovative products. One of the exciting applications of oleogels is the delivery of functional molecules, where the incorporation of oil-soluble functional compounds can be explored not only at the macroscale but also at micro- and nanoscales, resulting in different release behaviors and also different applications. This review presents and discusses the most recent works on the development, production, characterization, and applications of oleogels and other oleogel-based systems to deliver functional molecules in foods.

Recent advances on food-grade oleogels: Fabrication, application and research trends

In order to improve the nutritional and quality characteristics of food, solid fats are widely used in food formulations. With the continuous improvement of consumers' awareness of health in recent years, substantial attempts have been carried out to find substitutes for solid fats to reduce saturated fatty acid content in foods. Oleogels have drawn increasing attention due to their attractive advantages such as easy fabrication, superior fatty acid composition and safe use in food products to satisfy consumers' demands for healthy products. This review provides the latest information on the diversified oleogel systems. The feasibility of oleogel and oleogel-based system as nutraceutical vehicles is elucidated. The type as well as concentration of oleogelators and the synergistic effect between two or more oleogelators are important factors affecting the properties of obtained oleogel. Oleogels used in nutraceutical delivery have been shown to offer increased loading amount, enhanced bioaccessibility and targeted or controlled release. These nutrients wrapped in oleogels may in turn affect the formation and properties of oleogels. Furthermore, the future perspectives of oleogels are discussed. The feasible research trends of food-grade oleogel include oleogel-based solid lipid particle, essential oil-in-oleogel system, delivery of probiotics, nutraceuticals co-delivery and microencapsulated oleogel.

Preparation of Protein Oleogels: Effect on Structure and Functionality

Among available structuring agents that have been used to provide solid properties to liquid oils, protein is a more recent candidate. Due to their nutritional value and high consumer acceptance, proteins are of special interest for the preparation of edible oleogels as an alternative for solid fats. Whereas the field of protein oleogelation is still rather new and just starts unfolding, several preparation methods have been demonstrated to be suitable for protein oleogel preparation. However, there is limited knowledge regarding the link between microstructural properties of the gels and macroscopic rheological properties, and the potential of such protein-based oleogels as a fat replacer in food products. In this review, we therefore provide an overview of various protein oleogel preparation methods and the resulting gel microstructures. Based on the different structures, we discuss how the rheological properties can be modified for the different types of protein oleogels. Finally, we consider the suitability of the different preparation methods regarding potential applications on industrial scale, and provide a short summary of the current state of knowledge regarding the behavior of protein oleogels as a fat replacer in food products.

Self-assembled lipids for food applications: A review

Lipids play an important role in human nutrition. Several foodstuffs can be manufactured from the simple, compound and derived lipids. In particular, the use of self-assembled lipids (SLs, e.g. self-assembled L-α-lecithin) has brought great attention for the development of tailored, tuned and targeted colloidal structures loading degradation-sensitive substances with valuable antimicrobial, antioxidant and nutraceutical properties for food applications. For example, polyunsaturated fatty acids (PUFAs) and essential oils can be protected from degradation, thus improving their bioavailability in general terms in consumers. From a nanotechnological point of view, SLs allow the development of advanced and multifaceted architectures, in which each molecule of them are used as building blocks to obtain designed and ordered structures. It is important to note before beginning this review, that simple and compound lipids are the main SLs, while essential fatty acids and derived lipids in general have been considered by many research groups as the bulk loaded substances within several structures from self-assembled carbohydrates, proteins and lipids. However, this review paper is addressed on the analysis of the lipid-lipid self-assembly. Lipids can be self-assembled into various structures (micelles, vesicular systems, lyotropic liquid crystals, oleogels and films) to be used in different food applications: coatings, controlled and sustained release materials, emulsions, functional foods, etc. SLs can be obtained via non-covalent chemical interactions, primarily by hydrogen, hydrophilic and ionic bonding, which are influenced by the conditions of ionic strength, pH, temperature, among others. This manuscript aims to give an analysis of the specific state-of-the-art of SLs for food applications, based primarily on the literature reported in the past five years.

Structural characterization of nanoemulsions stabilized with sodium caseinate and of the hydrogels prepared from them by acid-induced gelation

Hydrogels obtained by acidification with glucono-δ-lactone (GDL), starting from nanoemulsions formulated with different concentrations of sodium caseinate (1-4 wt%) or 4 wt% sodium caseinate and sucrose (2-8 wt%), were prepared with the aim of quantifying structural parameters of both, initial nanoemulsions and hydrogels after 2.5 h of GDL addition, using the Guinier-Porod (GP) or the generalized GP models. Gelation process was followed by performing in situ temperature-controlled X-ray small angle scattering experiments (SAXS) using synchrotron radiation. In nanoemulsions, the calculated radius of gyration for oil nanodroplets (Rg _oil ) decreased with increasing protein concentration and for the 4 wt% protein nanoemulsion, with increasing sucrose content. Calculated values of Rg _oil were validated correlating them with experimental Z-average values as measured by dynamic light scattering (DLS). For hydrogels, radii of gyration for the sphere equivalent to the hydrogel scattering object (R _gsph ) were close to 3 nm while correlation distances among building blocks (R _g2 ) were dependent on formulation. They increased with increasing contents of sodium caseinate and sucrose. R _g2 parameter linearly correlated with hydrogel strength (G' _∞ ): a more connected nanostructure led to a stronger hydrogel.

Tailoring Properties of Mixed-Component Oleogels: Wax and Monoglyceride Interactions Towards Flaxseed Oil Structuring

The combination of oleogelators in oil structuring has an untapped potential, since effective pairs have usually been found by serendipity. The aim of this work was to evaluate the combination of berry (BEW) or sunflower wax (SHW) with glycerol monostearate (GMS) in flaxseed oil (FXO) at 5 and 25 °C. The thermal and mechanical properties, microstructure, and stability of oleogels were investigated. Self-standing and translucent gels were obtained from BEW in FXO. However, the mixture BEW:GMS resulted in a decrease of dynamic moduli. Moreover, changes in the crystal network and a reduction of oil binding capacity were noticed. Thus, the GMS prevented the complete organization of BEW in polyunsaturated chains of FXO. Conversely, a positive interaction was found for GMS:SHW, since both alone were not able to impart the structure in FXO. Interestingly, gel was formed with improved properties, even with a small addition of GMS, although an ideal ratio of 1:1 (GMS50:50SHW) was found. Oxidative stability analysis showed that all gels resembled the behavior of liquid oil (~12.00 meqO₂/kg) over 30 days storage. Therefore, semi-solid systems with nutritional and techno-functional claims were created by using waxes and fatty-acid derivative oleogelator in a rational fashion; this opened the opportunity to tailor oleogel properties.

Evaluation of linseed oil oleogels to partially replace pork backfat in fermented sausages

BACKGROUND

Nowadays, fat replacement in meat products is a matter of concern in the meat industry. The objective of this study was to evaluate the replacement of pork backfat with two oleogels of linseed in dry-cured sausages.

RESULTS

Five batches of dry-cured sausages were prepared with two oleogels, a mixture of γ-oryzanol and β-sitosterol (SO) and beeswax (B), at two levels of replacement (20% and 40%) (SO-20, SO-40, B-20, and B-40, respectively) and a control batch. The fatty acid profile improved in terms of nutrition: the polyunsaturated fatty acid / saturated fatty acid (PUFA/SFA) and n-6/n-3 ratio was about 1.41 and 0.93 for the higher levels of replacement, SO-40 and B-40, respectively. Quality parameters such as pH and color also changed with the inclusion of oleogels, resulting in changes in the sensory quality.

CONCLUSION

Oleogels based on linseed enabled the replacement of pork backfat in fermented sausages. Depending on the level of fat substitution, such oleogels could replace fat in dry-cured sausages at the industrial level. © 2019 Society of Chemical Industry.

Functional Foods: Product Development, Technological Trends, Efficacy Testing, and Safety

Functional foods is a very popular term in the social and scientific media; consequently, food producers have invested resources in the development of processed foods that may provide added functional benefits to consumers' well-being. Because of intrinsic regulation and end-of-use purposes in different countries, worldwide meanings and definitions of this term are still unclear. Hence, here we standardize this definition and propose a guideline to attest that some ingredients or foods truly deserve this special designation. Furthermore, focus is directed at the most recent studies and practical guidelines that can be used to develop and test the efficacy of potentially functional foods and ingredients. The most widespread functional ingredients, such as polyunsaturated fatty acids (PUFAs), probiotics/prebiotics/synbiotics, and antioxidants, and their technological means of delivery in food products are described. The review discusses the steps that food companies should take to ensure that their developed food product is truly functional.