Ultrahigh-pressure liquid chromatography using a 1-mm id column packed with 1.5-μm porous particles

Preparation of high-efficiency HILIC capillary columns utilizing slurry packing at 2100 bar

Complex mixture analysis requires high-efficiency chromatography columns. Although reversed phase liquid chromatography (RPLC) is the dominant approach for such mixtures, hydrophilic interaction liquid chromatography (HILIC) is an important complement to RPLC by enabling the separation of polar compounds. Chromatography theory predicts that small particles and long columns will yield high efficiency; however, little work has been done to prepare HILIC columns longer than 25 cm packed with sub-2 μm particles. In this work, we tested the slurry packing of 75 cm long HILIC columns with 1.7 μm bridged-ethyl-hybrid amide HILIC particles at 2,100 bar (30,000 PSI). Acetonitrile, methanol, acetone, and water were tested as slurry solvents, with acetonitrile providing the best columns. Slurry concentrations of 50-200 mg/mL were assessed, and while 50-150 mg/mL provided comparable results, the 150 mg/mL columns provided the shortest packing times (9 min). Columns prepared using 150 mg/mL slurries in acetonitrile yielded a reduced minimum plate height (hmin) of 3.3 and an efficiency of 120,000 theoretical plates for acenaphthene, an unretained solute. Para-toluenesulfonic acid produced the lowest hmin of 1.9 and the highest efficiency of 210,000 theoretical plates. These results identify conditions for producing high-efficiency HILIC columns with potential applications to complex mixture analysis.

Quantitative evaluation of reversed-phase packing material based on calcium carbonate microspheres modified with an alternating copolymer

Considering the vulnerability of silica gel to alkaline mobile phases, a highly alkaline stable stationary phase for HPLC is required to separate basic compounds with high separation efficiency. To address this issue, we have developed a high alkaline stable packing material (CaCO₃-PMAcO) based on mesoporous calcium carbonate microspheres modified with poly(maleic acid-alt-1-octadecene). In this study, we report further investigation of the separation performance of CaCO₃-PMAcO column by systematically evaluating the effects of particle size and chromatographic conditions. Based on the theory of the van Deemter equation, the separation efficiency was related to the size of CaCO₃-PMAcO particles (2.9 - 5.7 µm). The evaluation of thermodynamics of retention by changing the column temperature from 20 °C to 45 °C implied that the retention mode was dominated by hydrophobic interaction associated with the exothermic enthalpy changes (-11.1 to -12.5 kJ/mol). The results of column selectivity tests revealed that the CaCO₃-PMAcO column had hydrophobic selectivity comparable to C₁₈ silica gel columns (α_P/B; CaCO₃-PMAcO column: 1.53, C₁₈ column: 1.69), and higher shape/steric selectivity (α_Tri/Ter; CaCO₃-PMAcO column: 1.56, C₁₈ column: 0.955). In practice, the CaCO₃-PMAcO column could be applied to the separation of not only alkylbenzenes and polycyclic aromatic hydrocarbons, but also to basic tricyclic antidepressants by using an alkaline mobile phase (pH 12).

Using 1.5 mm internal diameter columns for optimal compatibility with current liquid chromatographic systems

This article describes the use of a new prototype column hardware made with 1.5 mm internal diameter (i.d.) and demonstrates some benefits over the 1.0 mm i.d. micro-bore column. The performance of 2.1, 1.5 and 1.0 mm i.d. columns were systematically compared. With the 1.5 mm i.d. column, the loss of apparent column efficiency can be significantly reduced compared to 1.0 mm i.d. columns in both isocratic and gradient elution modes. In the end, the 1.5 mm i.d. column is almost comparable to 2.1 mm i.d. column from a peak broadening point of view. The advantages of the 1.5 mm i.d. hardware vs 2.1 mm i.d. narrow-bore columns are the lower sample and solvent consumption, and reduced frictional heating effects due to decreased operating flow rates.

Liquid chromatography above 20,000 PSI

Continued improvements in HPLC have led to faster and more efficient separations than previously possible. One important aspect of these improvements has been the increase in instrument operating pressure and the advent of ultrahigh pressure LC (UHPLC). Commercial instrumentation is now capable of up to ~20 kpsi, allowing fast and efficient separations with 5-15 cm columns packed with sub-2 μm particles. Home-built instruments have demonstrated the benefits of even further increases in instrument pressure. The focus of this review is on recent advancements and applications in liquid chromatography above 20 kpsi. We outline the theory and advantages of higher pressure and discuss instrument hardware and design capable of withstanding 20 kpsi or greater. We also overview column packing procedures and stationary phase considerations for HPLC above 20 kpsi, and lastly highlight a few recent applicatioob pressure instruments for the analysis of complex mixtures.

Repeatability of gradient ultrahigh pressure liquid chromatography-tandem mass spectrometry methods in instrument-controlled thermal environments

The impact of viscous friction on eluent temperature and column efficiency in liquid chromatography is of renewed interest as the need for pressures exceeding 1000bar to use with columns packed with sub-2μm particles has grown. One way the development of axial and radial temperature gradients that arise due to viscous friction can be affected is by the thermal environment the column is placed in. In this study, a new column oven integrated into an ultrahigh pressure liquid chromatograph that enables both still-air and forced-air operating modes is investigated to find the magnitude of the effect of the axial thermal gradient that forms in 2.1×100mm columns packed with sub-2μm particles in these modes. Temperature increases of nearly 30K were observed when the generated power of the column exceeded 25W/m. The impact of the heating due to viscous friction on the repeatability of peak capacity, elution time, and peak area ratio to an internal standard for a gradient UHPLC-MS/MS method to analyze neurotransmitters was found to be limited. This result indicates that high speed UHPLC-MS/MS gradient methods under conditions of high viscous friction may be possible without the negative effects typically observed with isocratic separations under similar conditions.

Rapid determination of parabens in seafood sauces by high-performance liquid chromatography: A practical comparison of core-shell particles and sub-2 μm fully porous particles

In this work, the chromatographic performance of superficially porous particles (Halo core-shell C18 column, 50 mm × 2.1 mm, 2.7 μm) was compared with that of sub-2 μm fully porous particles (Acquity BEH C18 , 50 mm × 2.1 mm, 1.7 μm). Four parabens, methylparaben, ethylparaben, propylparaben, and butylparaben, were used as representative compounds for calculating the plate heights in a wide flow rate range and analyzed on the basis of the Van Deemter and Knox equations. Theoretical Poppe plots were constructed for each column to compare their kinetic performance. Both phases gave similar minimum plate heights when using nonreduced coordinates. Meanwhile, the flat C-term of the core-shell column provided the possibilities for applying high flow rates without significant loss in efficiency. The low backpressure of core-shell particles allowed this kind of column, especially compatible with conventional high-performance liquid chromatography systems. Based on these factors, a simple high-performance liquid chromatography method was established and validated for the determination of parabens in various seafood sauces using the Halo core-shell C18 column for separation.

A fully automated dual-online multifunctional ultrahigh pressure liquid chromatography system for high-throughput proteomics analysis

A fully automated dual-online multifunctional ultrahigh pressure liquid chromatography (DO-MULTI-UPLC) system has been developed for high throughput proteome analyses of complex peptide mixtures. The system employs two online solid phase extraction (SPE) columns (150μm inner diameter×3cm), two capillary reverse phase (RP) columns (75μm×100cm) and a strong cation exchange (SCX) column (150μm×15cm) on a single system utilizing one binary pump and one isocratic pump. With the automated operation of six switching valves, the selection of LC experiments between single-dimensional RPLC and online two-dimensional SCX/RPLC were achieved automatically, without manual intervention, while two RPLC columns were used independently and alternatively. By essentially removing the dead time for column equilibration between experiments, in either 1D mode or 2D experimental mode, the current system was demonstrated to increase the experimental throughput by about two folds, while keeping the inter-column reproducibility of peptide elution time in less than 1% of gradient time. The advantageous features of the proposed system were demonstrated by its application to proteome samples of varying complexities.

Phosphopeptide enrichment with TiO2-modified membranes and investigation of tau protein phosphorylation

Selective enrichment of phosphopeptides prior to their analysis by mass spectrometry (MS) is vital for identifying protein phosphorylation sites involved in cellular regulation. This study describes modification of porous nylon substrates with TiO2 nanoparticles to create membranes that rapidly enrich phosphopeptides. Membranes with a 22-mm diameter bind 540 nmol of phosphoangiotensin and recover 70% of the phosphopeptides in mixtures with a 15-fold excess of nonphosphorylated proteins. Recovery is 90% for a pure phosphopeptide. Insertion of small membrane disks into HPLC fittings allows rapid enrichment from 5 mL of 1 fmol/μL phosphoprotein digests and concentration into small-volume (tens of microliters) eluates. The combination of membrane enrichment with tandem mass spectrometry reveals seven phosphorylation sites from in vivo phosphorylated tau (p-tau) protein, which is associated with Alzheimer's disease.

Metaproteomics: harnessing the power of high performance mass spectrometry to identify the suite of proteins that control metabolic activities in microbial communities

The availability of extensive genome information for many different microbes, including unculturable species in mixed communities from environmental samples, has enabled systems-biology interrogation by providing a means to access genomic, transcriptomic, and proteomic information. To this end, metaproteomics exploits the power of high-performance mass spectrometry for extensive characterization of the complete suite of proteins expressed by a microbial community in an environmental sample.

Microbial metaproteomics: identifying the repertoire of proteins that microorganisms use to compete and cooperate in complex environmental communities

The availability of genome information for microbial consortia, including unculturable species, from environmental samples has enabled systems-biology interrogation by providing a means to access genomic, transcriptomic, and proteomic information. This provides a unique opportunity to characterize the molecular activities and interactions of these microbial systems at a comprehensive level never before possible. Such information not only provides details about the organizational, functional, and metabolic activities of such systems, but also the untapped reserve of molecular activities that might be invoked and exploited under certain environmental conditions. Since bacteria naturally exist in complex ecosystems, it is imperative to develop and utilize analytical approaches that can provide molecular level details on systems consisting of mixed microbial membership. This is the realm of metaproteomics-the characterization of the complement of proteins expressed by a microbial community in an environmental sample.

Fast liquid chromatography combined with mass spectrometry for the analysis of metabolites and proteins in human body fluids

In the last decade various analytical strategies have been established to enhance separation speed and efficiency in high performance liquid chromatography applications. Chromatographic supports based on monolithic material, small porous particles, and porous layer beads have been developed and commercialized to improve throughput and separation efficiency. This paper provides an overview of current developments in fast chromatography combined with mass spectrometry for the analysis of metabolites and proteins in clinical applications. Advances and limitations of fast chromatography for the combination with mass spectrometry are discussed. Practical aspects of, recent developments in, and the present status of high-throughput analysis of human body fluids for therapeutic drug monitoring, toxicology, clinical metabolomics, and proteomics are presented.

Use of kinetic plots for the optimization of the separation time in ultra-high-pressure LC

The kinetic-plot approach, in which experimental t(0) and N-values are extrapolated to the performance at maximum system pressure by increasing the column length, was validated by coupling 250×3 mm columns packed with 3 μm particles. The extra-column volume introduced by coupling columns could be neglected with respect to the peak volumes. Plate numbers of up to 132,000 were experimentally achieved by coupling four columns. The maximum deviation between the experimental and predicted plate numbers was 7% for two coupled columns, and decreasing to 0.1% for four coupled columns. Kinetic plots were used to find the conditions to separate a critical pair, with a preset value for the effective plate number, in the shortest possible time. For high-efficiency separations yielding 100,000 effective plates, the optimum critical-pair retention factor was around 4.5. Kinetic plots are presented to find the optimal column length to obtain the fastest possible 100,000 effective-plate separation, taking into account the effect of mobile-phase viscosity on column pressure, and consequently the optimum column length.

Application of mass spectrometry to study proteomics and interactomics in cystic fibrosis

The cystic fibrosis transmembrane conductance regulator (CFTR) does not function in isolation, but rather in a complex network of protein-protein interactions that dictate the physiology of a healthy cell and tissue and, when defective, the pathophysiology characteristic of cystic fibrosis (CF) disease. To begin to address the organization and operation of the extensive cystic fibrosis protein network dictated by simultaneous and sequential interactions, it will be necessary to understand the global protein environment (the proteome) in which CFTR functions in the cell and the local network that dictates CFTR folding, trafficking, and function at the cell surface. Emerging mass spectrometry (MS) technologies and methodologies offer an unprecedented opportunity to fully characterize both the proteome and the protein interactions directing normal CFTR function and to define what goes wrong in disease. Below we provide the CF investigator with a general introduction to the capabilities of modern mass spectrometry technologies and methodologies with the goal of inspiring further application of these technologies for development of a basic understanding of the disease and for the identification of novel pathways that may be amenable to therapeutic intervention in the clinic.

Rapid catalyst screening by a continuous-flow microreactor interfaced with ultra-high-pressure liquid chromatography

A high-throughput screening system for homogeneous catalyst discovery has been developed by integrating a continuous-flow capillary-based microreactor with ultra-high-pressure liquid chromatography (UHPLC) for fast online analysis. Reactions are conducted in distinct and stable zones in a flow stream that allows for time and temperature regulation. UHPLC detection at high temperature allows high throughput online determination of substrate, product, and byproduct concentrations. We evaluated the efficacies of a series of soluble acid catalysts for an intramolecular Friedel-Crafts addition into an acyliminium ion intermediate within 1 day and with minimal material investment. The effects of catalyst loading, reaction time, and reaction temperature were also screened. This system exhibited high reproducibility for high-throughput catalyst screening and allowed several acid catalysts for the reaction to be identified. Major side products from the reactions were determined through off-line mass spectrometric detection. Er(OTf)(3), the catalyst that showed optimal efficiency in the screening, was shown to be effective at promoting the cyclization reaction on a preparative scale.