Rational design of Boerhavia diffusa derived CoFe2O4-Carbon dots@Boehmite platform for photocatalysis and ultra trace monitoring of hazardous pesticide and UO22+ ions

In view of exploiting natural resources for designing of effectual materials in favor of detection and obliteration of water pollutants, a fluorescent nanomaterial (CDBHCF) based on biomass derived carbon dots (CDs) was constructed. The CDs and cobalt ferrite (CF) particles were anchored on boehmite (BH) which served as a support material for CDs. The CDBHCF nanocomposite was prepared via facile hydrothermal treatment for selective recognition of Methyl parathion (MP) pesticide and uranyl ions (UO22+). The corresponding structural, morphological and opto-electronic properties of the nanomaterials have been investigated by different physicochemical techniques. The fluorescent CDBHCF probe was employed to detect extremely low concentration of MP and UO22+ with detection limit of 22.4 nM and 4.4 nM, respectively. Ultimately, the proposed sensing platform was validated through real sample analysis. Besides, CDBHCF nanocomposite was utilized for photocatalytic abolition of Tetracycline (TC) in water samples. Initially, the impact of various operational parameters on the degradation efficiency, including catalyst dosage and initial pH were thoroughly examined. Under optimized conditions, the fabricated CDBHCF nanocomposite demonstrated excellent results for photocatalytic degradation of TC (92 % degradation in 120 min) under visible light illumination. Thus, the proposed strategy delivered an innovative insight for dual purpose of CDBHCF nanocomposite: as a fluorescent probe for real time monitoring and as a photocatalyst for removal of pollutants via simple photocatalytic degradation.

Synergistic Manganese Cobalt Phosphide core-shell for the Electrochemical Detection of Methyl Parathion in Food Sample

The development of a robust electrocatalyst for the electrochemical sensor for hazardous pesticides will reduce its effects on the ecosystem. Herein, we synthesized the robust manganese cobalt phosphide (MnCoP) - Core-shell as an electrochemical sensor for the determination of hazardous pesticide methyl parathion (MP). The MnCoP- Core-shell was prepared with the sustainable self-template route can help with the larger surface area. The Core-shell structure of MnCoP possesses a higher active surface area which increases the electrocatalytic performance and is utilized to improve the electrochemical MP reduction with the synergism of the core and shell structure. Remarkably, it realizes the higher sensitivity (0.014 μA μM-1 cm-2) of MnCoP- Core-shell/GCE achieves towards MP with lower limit of detection (LoD 50 nM) and exceptional recovery rate of MP in vegetable samples are achieved with the differential pulse voltammetry (DPV) technique. The MnCoP- Core-shell electrode reserved their superior electrochemical performances with high reproducibility and repeatability. This prominent activity of the MnCoP core-shell towards the MP in real sample analysis, makes it a promising electrochemical sensor for the detection of MP.

Organic-silica hybrid monolithic sorbents for sample preparation techniques: A review on advances in synthesis, characterization, and applications

Organic-silica hybrid monolithic materials have attracted considerable attention as potential stationary phases in separation science. These materials combine the advantages of organic polymer and silica-based monoliths, including easy preparation, lower back pressure, high permeability, excellent mechanical strength, thermal stability, and tunable surface chemistry with high surface area and selectivity. The outstanding chromatographic efficiency as stationary phase of hybrid monolithic capillary columns for capillary liquid chromatography and capillary electrochromatography has been reported in many papers. Organic-silica hybrid monolithic materials have also been extensively used in the field of sample preparation. Owing to their surface functionalities, these porous sorbents offer unique selectivity for pre-concentration of different analytes in the most complex matrixes by fast dynamic transport. These sorbents not only improve the analytical method sensitivity, but also introduce novelties in terms of extraction devices and instrument coupling strategies. The current review covers the period spanning from 2017 to 2023 and describes the properties of organic-inorganic hybrid monolithic materials, the present status of this technology and summarizes recent developments in their use as innovative sorbents for microextraction sample preparation techniques (solid phase microextraction with pipette tip, offline in-tube SPME, in-tube SPME online with LC, and in-tube SPME directly coupled with mass spectrometry). Aspects such as the synthesis methods (sol-gel process, one-pot approach, and polyhedral oligomeric silsesquioxanes-based procedure), characterization techniques, and strategies to improve extraction efficiency in various applications in different areas (environmental, food, bioanalysis, and proteomics) are also discussed.

Assessing the greenification potential of cyclodextrin-based molecularly imprinted polymers for pesticides detection

Cyclodextrins, with their unparalleled attributes of eco-friendliness, natural abundance, versatile utility, and facile functionalization, make a paramount contribution to the field of molecular imprinting. Leveraging the unique properties of cyclodextrins in molecularly imprinted polymers synthesis has revolutionized the performance of molecularly imprinted polymers, resulting in enhanced adsorption selectivity, capacity, and rapid extraction of pesticides, while also circumventing conventional limitations. As the concern for food quality and safety continues to grow, the need for standard analytical methods to detect pesticides in food and environmental samples has become paramount. Cyclodextrins, being non-toxic and biodegradable, present an attractive option for greener reagents in imprinting polymers that can also ensure environmental safety post-application. This review provides a comprehensive summary of the significance of cyclodextrins in molecular imprinting for pesticide detection in food and environmental samples. The recent advancements in the synthesis and application of molecularly imprinted polymers using cyclodextrins have been critically analyzed. Furthermore, the current limitations have been meticulously examined, and potential opportunities for greenification with cyclodextrin applications in this field have been discussed. By harnessing the advantages of cyclodextrins in molecular imprinting, it is possible to develop highly selective and efficient methods for detecting pesticides in food and environmental samples while also addressing the challenges of sustainability and environmental impact.

A molecularly imprinted polymer monolithic column with dual template and bifunctional monomers for selective extraction and simultaneous determination of eight phenolics from polycarbonate cups

A molecularly imprinted polymer (MIP) monolithic column was prepared in situ in a pipette tip using phenol and bisphenol A as dual templates, 4-vinyl pyridine and β-cyclodextrin as bifunctional monomers. It was used for the selective and simultaneous solid phase extraction of eight phenolics, including phenol, m-cresol, p-tert-butylphenol, bisphenol A, bisphenol B, bisphenol E, bisphenol Z, and bisphenol AP. The MIP monolithic column was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and nitrogen adsorption experiment. The results of selective adsorption experiments showed that the MIP monolithic column can selective recognize the phenolics and have excellent adsorption property. The imprinting factor for bisphenol A can be as high as 4.31, and the maximum adsorption capacity for bisphenol Z can reach 201.66 mg g^-1. Under the optimal extraction conditions, a selective and simultaneous extraction and determination method for eight phenolics was established based on the MIP monolithic column and high-performance liquid chromatography with ultraviolet detection. The linear ranges (LRs) of the eight phenolics were 0.5-200 μg L^-1, the limits of quantification (LOQs) and detection (LODs) were 0.5-2.0 μg L^-1 and 0.15-0.67 μg L^-1. The method was applied to detect the migration quantity of the eight phenolics from polycarbonate cups and had satisfactory recovery. The method has the advantages of simple synthesis, short extraction time, as well as good repeatability and reproducibility, which provides a sensitive and reliable strategy for extracting and detecting phenolics from food contact material.

On-site screening method for bioavailability assessment of the organophosphorus pesticide, methyl parathion, and its primary metabolite in soils by paper strip biosensor

An important public concern worldwide is soil pollution caused by organophosphorus pesticides and their primary metabolites. To protect the public's health, screening these pollutants on-site and determining their soil bioavailability is important, but doing so is still challenging. This work improved the already-existing organophosphorus pesticide hydrolase (mpd) and transcriptional activator (pobR), and it first designed and constructed a novel biosensor (Escherichia coli BL21/pNP-LacZ) that can precisely detect methyl parathion (MP) and its primary metabolite p-nitrophenol with low background value. To create a paper strip biosensor, E. coli BL21/pNP-LacZ was fixed to filter paper using bio-gel alginate and sensitizer polymyxin B. According to the calibrations of the paper strip biosensor for soil extracts and standard curve, the color intensity of the paper strip biosensor collected by the mobile app may be used to compute the concentration of MP and p-nitrophenol. This method's detection limits were 5.41 µg/kg for p-nitrophenol and 9.57 µg/kg for MP. The detection of p-nitrophenol and MP in laboratory and field soil samples confirmed this procedure. Paper strip biosensor on-site allows for the semi-quantitative measurement of p-nitrophenol and MP levels in soils in a simple, inexpensive, and portable method.

Sn/MoC@NC hollow nanospheres as Schottky catalyst for highly sensitive electrochemical detection of methyl parathion

Developing electrode materials with excellent electrocatalytic properties for detecting pesticide residues plays a vital role in the safety of agricultural products and environmental applications. Herein, we designed a new electrochemical sensor on the basis of N-doped carbon hollow nanospheres modified with Sn/MoC Schottky junction (Sn/MoC@NC) for methyl parathion (MP) detection. The Sn/MoC@NC was prepared by self-assembled polymerization-anchoring strategy and high-temperature carbonization design. Sn/MoC Schottky junction and hollow nanosphere structure endow Sn/MoC@NC with a larger surface area, more active sites, and faster electron transfer, which is beneficial to enhancing its electrocatalytic performance. The structural characterizations and physicochemical properties of Sn/MoC@NC were explored through various microscopy, spectroscopic and electrochemical techniques. The experimental results confirmed that the calibration curve for current and MP concentration (0.05-10 μg/mL) was available under optimized conditions, and the sensitivity and detection limit were respectively determined to be 9.02 μA μM¹ cm² and 8.9 ng/mL. Furthermore, the constructed sensor displayed excellent selectivity, repeatability, and stability, which qualified it for use in detecting MP in grapes and tap water with satisfactory recovery. This work may provide some interesting prospects for constructing high-performance electrocatalysts for MP detection.

Chiral covalent organic framework incorporated organic polymer monolithic capillary column for enantioseparations

A chiral covalent organic framework was synthesized, characterized, and incorporated into organic polymer monolithic capillary columns to provide chiral stationary phases for enantioseparations. The prepared monolithic capillary columns were characterized by scanning electron microscopy and elemental analysis. To obtain better enantioseparations, the columns' preparation conditions, and enantioseparation conditions were optimized. Baseline resolutions of several chiral compounds were obtained with good reproducibility and stability. Furthermore, the mechanism of chiral recognition was investigated using molecular docking with AutoDock. Docking results showed that the enantioselectivity factor rather than resolution is correlated with the binding free energy difference between enantiomers with the chiral covalent organic framework. And abundant acetoxy and nitrile groups as well as benzene rings in the chiral covalent organic framework are responsible for the enantioseparation ability of the chiral monolithic capillary columns.

AuNPs and graphdiyne nanocomposite as robust electrocatalyst for methyl parathion detection in real samples

The present work describes a simple and rapid synthesis method of gold nanoparticles and graphdiyne (AuNPs@GDY) nanocomposites including porous structure. Moreover, the synthesized AuNPs@GDY material was decorated on the glassy carbon electrode (GCE) with a drop coating method to construct a non-enzymatic electrochemical pesticides sensor. The micro-morphology and elemental composition of the materials were characterized by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS). The electrocatalysis and conductivity of the material were studied with cyclic voltammetry (CV) and impedance method, respectively. The properties of the sensor were investigated by CV and differential pulse voltammetry (DPV). The results showed that AuNPs@GDY exhibited excellent electrocatalytic ability for methyl parathion in a wide linear range (from 0.25 ng/mL to 24.43 μg/mL) and low limit of detection value (6.2 pg/mL). Furthermore, the DPV method used in this paper was accurate and sensitive, and could be used for routine quality control of methyl parathion in kiwi fruit and tomato samples.

Development of Molecularly Imprinted Polymers for Fenthion Detection in Food and Soil Samples

Modern agricultural production is greatly dependent on pesticide usage, which results in severe environmental pollution, health risks and degraded food quality and safety. Molecularly imprinted polymers are one of the most prominent approaches for the detection of pesticide residues in food and environmental samples. In this research, we prepared molecularly imprinted polymers for fenthion detection by using beta-cyclodextrin as a functional monomer and a room-temperature ionic liquid as a cosolvent. The characterization of the developed polymers was carried out. The polymers synthesized by using the room-temperature ionic liquid as the cosolvent had a good adsorption efficiency of 26.85 mg g⁻¹, with a short adsorption equilibrium time of 20 min, and the results fitted well with the Langmuir isotherm model and pseudo-second-order kinetic model. The polymer showed cross-selectivity for methyl-parathion, but it had a higher selectivity as compared to acetamiprid and abamectin. A recovery of 87.44–101.25% with a limit of detection of 0.04 mg L⁻¹ and a relative standard deviation of below 3% was achieved from soil, lettuce and grape samples, within the linear range of 0.02–3.0 mg L⁻¹, using high-performance liquid chromatography with an ultraviolet detector. Based on the results, we propose a new, convenient and practical analytical method for fenthion detection in real samples using improved imprinted polymers with room-temperature ionic liquid.

Chromatographic techniques for the analysis of organophosphate pesticides with their extraction approach: a review (2015-2020)

In agriculture, a wide range of OPPs has been employed to boost crop yield, quality, and storage life. However, due to the ever-increasing population and rapid urbanization, pesticide use has surged in recent years. These compounds are exceedingly poisonous to humans, and despite the fact that specific legislation prohibits their use, the frequency of toxic and/or fatal incidents, as well as current statistics, suggest that they are currently accessible. As a result, determining the exposure to these substances as well as their detection (and that of their metabolites) in different types of exposed samples has become a hot issue in terms of quality and safety concerns. However, developing tools for the evaluation of these substances is a critical challenge for laboratories. Various chromatographic-based methods reported in the period of 2015-2020 have been developed, which are summarized and critically reviewed in this article, including the extraction of the target OPPs from different kinds of matrices. A comparison among the extraction and analysis techniques has been made in the current review article.

Magnetic Fe3O4@SiO2@β-cyclodextrin for solid phase extraction of methyl parathion and fenthion in lettuce samples

In this study, magnetic Fe3O4@SiO2@β-cyclodextrin copolymerized microparticles were synthesized and applied for the extraction of methyl parathion and fenthion in lettuce samples followed by HPLC-UV detection. The magnetic β-cyclodextrin copolymerized microparticles were prepared by dispersion polymerization with acryloyl β-cyclodextrin as the functional monomer and ethylene glycol dimethyacrylate as the crosslinker. The composite magnetic microparticles were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, magnetic measurement, and thermogravimetric analysis, and used as the adsorbent of magnetic solid-phase extraction (MSPE) for methyl parathion and fenthion. The extraction conditions including sample pH and ionic strength, desorption solvent type and volume, and adsorption and desorption times were optimized. Under the optimal extraction conditions, an MSPE-HPLC-UV method was developed for the detection of methyl parathion and fenthion in lettuce. Wide linear ranges of 1.0-200 μg kg-1 (R2 = 0.9998) for methyl parathion and 1.5-200 μg kg-1 (R2 = 0.9978) for fenthion were obtained and the limits of detection were 0.3 μg kg-1 for methyl parathion and 0.5 μg kg-1 for fenthion in lettuce, respectively. The proposed method was applied for the determination of methyl parathion and fenthion in lettuce with satisfactory recoveries between 89.2-101.2%, and relative standard deviations were less than 9.1%. Thus, the MSPE-HPLC-UV method has high accuracy and sensitivity for the analysis of methyl parathion and fenthion in lettuce samples.

Recent advances in micro- and nanomaterial-based adsorbents for pipette-tip solid-phase extraction

There are a lot of review papers of sample pretreatment, but the comprehensive review on pipette-tip solid-phase extraction (PT-SPE) is lacking. This review (133 references) is mainly devoted to the development of different types of micro- and nanosorbent-based PT-SPE, including silica materials, carbon materials, organic polymers, molecularly imprinted polymers, and metal-organic frameworks. Each section mainly introduces and discusses the preparation methods, advantages and limitations of adsorbents, and their applications to environmental, biological, and food samples. This review also demonstrates the advantages of PT-SPE like convenience, speed, less organic solvent, and low cost. Finally, the future application and development trend of PT-SPE are prospected.

Fabrication of dendritic nanoporous gold via a two-step amperometric approach: Application for electrochemical detection of methyl parathion in river water samples

In this work, nanoporous gold (NPG) was prepared according to three different approaches, such as (i) anodization-electrochemical reduction (A-ECR, NPG_A), (ii) dynamic hydrogen bubble template (DHBT, NPG_B), and (iii) the combination of both methods (NPG_A+B). Field-emission scanning electron microscopy (FE-SEM) and cyclic voltammetry (CV) were used to investigate the structural morphology and the electrochemical behavior of the fabricated materials. The NPG_A+B electrode showed a large amount of surface defects and/or edges, greater electrochemical surface area (2.5 cm²), and increased roughness factor (35.4). Such outstanding features of the NPG_A+B platform were demonstrated by the sensitive detection of methyl parathion (MP) in river water samples. CV results indicated nearly 25-fold, 6-fold, and 2.5-fold higher sensitivity for NPG_A+B compared to that of bare Au, NPG_A, and NPG_B, respectively. Differential pulse voltammetry (DPV) results show a linear behavior in the MP concentration range of 5-50 ng mL^-1 with a limit of detection (LOD) of 0.6 ng mL^-1 and limit of quantification (LOQ) of 2.0 ng mL^-1. Besides, the NPG_A+B sensor also revealed excellent selectivity towards MP detection in the presence of other interfering molecules or ions, reproducibility, and repeatability.

Cyclodextrins as a Key Piece in Nanostructured Materials: Quantitation and Remediation of Pollutants

Separation and pre-concentration of trace pollutants from their matrix by reversible formation of inclusion complexes has turned into a widely studied field, especially for the benefits provided to different areas. Cyclodextrins are non-toxic oligosaccharides that are well known for their host–guest chemistry, low prices, and negligible environmental impact. Therefore, they have been widely used as chiral selectors and delivery systems in the pharmaceutical and food industry over time. However, their use for extraction purposes is hampered by their high solubility in water. This difficulty is being overcome with a variety of investigations in materials science. The setting-up of novel solid sorbents with improved properties thanks to the presence of cyclodextrins at their structure is still an open research area. Some properties they can offer, such as an increased selectivity or a good distribution along the surface of a solid support, which provides better accessibility for guest molecules, are characteristics of great interest. This systematic review reports the most significant uses of cyclodextrins for the adsorption of pollutants in different-origin samples based on the works reported in the literature in the last years. The study has been carried out indistinctly for quantitation and remediation purposes.

Pipette-tip solid-phase extraction using cetyltrimethylammonium bromide enhanced molybdenum disulfide nanosheets as an efficient adsorbent for the extraction of sulfonamides in environmental water samples

Surfactant cetyltrimethylammonium bromide enhanced molybdenum disulfide was used as an adsorbent in pipette-tip solid-phase extraction for the pretreatment of sulfonamides in environmental water samples. The factors affecting the extraction recoveries of the analytes, including the sample pH value, amount of sorbent, type and volume of eluent solution, and salt concentration were optimized. This pipette-tip solid-phase extraction method demonstrated good linearity (0.05-10.0 µg/L) with a coefficient of determination of 0.9984-0.9996, limit of detection (0.2-0.4 ng/L) and limit of quantitation (0.5-1.0 ng/L), good analyte recoveries (76-91), and acceptable limit of quantitation (<10%) under the optimized conditions. These results indicated that the proposed method was a good tool for monitoring sulfonamides in environmental water samples.