Graphene-based nanomaterials as potential candidates for environmental mitigation of pesticides

Over the years, bioaccumulation of hazardous chemicals in the food chain has become a critical issue, resulting in numerous health risks. Environmental mitigation aims to clean up contaminated sites and eliminate hazardous materials from the air, water, or soil to restore the site to its original and safe condition. Pesticides constitute one of the most dangerous environmental pollutants which are generally used to increase crop production. Addressing the removal or treatment of pesticides has become pivotal in mitigating environmental threats. Diverse remediation methods are employed to protect the environment and public health. Graphene-based materials have emerged as promising candidates with exceptional properties, including excellent adsorption capacity due to their high surface area, strong hydrophilicity, and tunable properties. Owing to these properties, they have been attracting major research attention in the field of design and fabrication of materials for the mitigation of pesticides from the environment such as from contaminated food, water and other samples. Various physical, chemical and biological extraction techniques are adopted to remove pesticides. This review article provides an insight into the potential role of graphene-based materials in the environmental remediation of pesticides. We have focused on the removal of Organophosphates, Organochlorines, Carbamates and Pyrethroids present in water, fruit, vegetable and other samples, highlighting the urgent need for environmental remediation. While graphene-based materials hold potential for pesticide remediation, addressing challenges in scalable production, assessing long-term sustainability, and mitigating potential environmental impacts are critical steps for successful large-scale applications.

Fe3O4@COF(TAPT-DHTA) Nanocomposites as Magnetic Solid-Phase Extraction Adsorbents for Simultaneous Determination of 9 Mycotoxins in Fruits by UHPLC-MS/MS

In this study, a simple and efficient magnetic solid-phase extraction (MSPE) strategy was developed to simultaneously purify and enrich nine mycotoxins in fruits, with the magnetic covalent organic framework nanomaterial Fe₃O₄@COF(TAPT-DHTA) as an adsorbent. The Fe₃O₄@COF(TAPT-DHTA) was prepared by a simple template precipitation polymerization method, using Fe₃O₄ as magnetic core, and 1,3,5-tris-(4-aminophenyl) triazine (TAPT) and 2,5-dihydroxy terephthalaldehyde (DHTA) as two building units. Fe₃O₄@COF(TAPT-DHTA) could effectively capture the targeted mycotoxins by virtue of its abundant hydroxyl groups and aromatic rings. Several key parameters affecting the performance of the MSPE method were studied, including the adsorption solution, adsorption time, elution solvent, volume and time, and the amount of Fe₃O₄@COF(TAPT-DHTA) nanomaterial. Under optimized MSPE conditions, followed by analysis with UHPLC-MS/MS, a wide linear range (0.05-200 μg kg^-1), low limits of detection (0.01-0.5 μg kg^-1) and satisfactory recovery (74.25-111.75%) were achieved for the nine targeted mycotoxins. The established method was further successfully validated in different kinds of fruit samples.

Magnetic phenolic resin core-shell structure derived carbon microspheres for ultrafast magnetic solid-phase extraction of triazine herbicides

In this study, monodisperse magnetic carbon microspheres were successfully synthesized through the carbonization of phenolic resin encapsulated Fe₃ O₄ core-shell structures. The magnetic carbon microspheres showed high performance in ultrafast extraction and separation of trace triazine herbicides from environmental water samples. Under optimized conditions, both the adsorption and desorption processes could be achieved in 2 min, and the maximum adsorption capacity for simazine and prometryn were 387.6 and 448.5 μg/g. Coupled with HPLC-UV detection technology, the detection limit of triazine herbicides was in the range of 0.30-0.41 ng/mL. The mean recoveries ranged from 81.44 to 91.03% with relative standard deviations lower than 7.47%. The excellent magnetic solid phase extraction performance indicates that magnetic carbon microspheres are promising candidate adsorbent for the fast analysis of environmental contaminants. This article is protected by copyright. All rights reserved.

Biomass-derived porous material synthesized by one-step calcination method for the magnetic solid phase extraction of polychlorinated biphenyls in water

Recent findings unfold that biomass materials with the micro/mesoporous structure were often treated as adsorbents for organic substances. In this work, one-step calcination method was adopted in the preparation of magnetic porous green bean biomass material. It has the properties of magnetism and porosity after the addition of Co(NO₃ )₂ and high temperature calcination. A variety of characterizations have been operated, including energy dispersive X-ray detector, vibrating sample magnetometer, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller analysis and so on. It has the specific surface area 168.1611 m² ∙g^-1 and the pore volumes 0.1764 cm³ ∙g^-1 . The material was used in magnetic solid phase extraction of three polychlorinated biphenyls including 2-chlorobiphenyl, 4-chlorobiphenyl and 2,2,5-trichlorobiphenyl. Several factors were investigated, such as material amount, eluents, adsorption time, solution pH, salinity and the reusability. Under optimized conditions, good recoveries (90.24-93.34%) were achieved with the relative standard deviation in a range from 2.30 % to 4.83 %. Three real water samples (tap, river and lake water) were tested to verify the accuracy of the method. This method can be successfully used in the analysis of some polychlorinated biphenyls congeners in water. This article is protected by copyright. All rights reserved.

Adsorption, degradation, and mineralization of emerging pollutants (pharmaceuticals and agrochemicals) by nanostructures: a comprehensive review

This review discusses a fresh pool of research findings reported on the multiple roles played by metal-based, magnetic, graphene-type, chitosan-derived, and sonicated nanoparticles in the treatment of pharmaceutical- and agrochemical-contaminated waters. Some main points from this review are as follows: (i) there is an extensive number of nanoparticles with diverse physicochemical and morphological properties which have been synthesized and then assessed in their respective roles in the degradation and mineralization of many pharmaceuticals and agrochemicals, (ii) the exceptional removal efficiencies of graphene-based nanomaterials for different pharmaceuticals and agrochemicals molecules support arguably well a high potential of these nanomaterials for futuristic applications in remediating water pollution issues, (iii) the need for specific surface modifications and functionalization of parent nanostructures and the design of economically feasible production methods of such tunable nanomaterials tend to hinder their widespread applicability at this stage, (iv) supplementary research is also required to comprehensively elucidate the life cycle ecotoxicity characteristics and behaviors of each type of engineered nanostructures seeded for remediation of pharmaceuticals and agrochemicals in real contaminated media, and last but not the least, (v) real wastewaters are extremely complex in composition due to the mix of inorganic and organic species in different concentrations, and the presence of such mixed species have different radical scavenging effects on the sonocatalytic degradation and mineralization of pharmaceuticals and agrochemicals. Moreover, the formulation of viable full-scale implementation strategies and reactor configurations which can use multifunctional nanostructures for the effective remediation of pharmaceuticals and agrochemicals remains a major area of further research.

Synthesis a graphene-like magnetic biochar by potassium ferrate for 17β-estradiol removal: Effects of Al2O3 nanoparticles and microplastics

A graphene-like magnetic biochar (GLMB) was synthesized using lotus seedpod and potassium ferrate with simple step and applied for E2 adsorption. GLMB was characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscope (AFM), X-ray photoelectron spectroscopy (XPS), Raman, X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and BET surface area. Several common (solution pH, ionic strength, humic acid and foreign ions) and new (Al₂O₃ nanoparticles and microplastics (MPs)) water experiment conditions were investigated. Characterization results demonstrated that the sample was fabricated successfully and it possessed some graphene-like properties and a large surface area (828.37 m²/g). Adsorption results revealed that the pseudo-second-order kinetics and Langmuir isotherm models could provide a better description for E2 uptake behavior. The E2 adsorption capacity could be influenced by solution pH, ionic strength and SO₄^2- ions, and the effect of humic acid and background electrolyte (Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl^-, NO₃^-, PO₄^3-) could be neglected. The presences of Al₂O₃/MPs significantly decreased the time to reach adsorption equilibrium for E2 adsorption on GLMB, but had no obvious improvement or inhibiting effects on E2 removal when the adsorption reached equilibrium. The adsorption mechanism for E2 adsorption on GLMB was multiple, which involving π-π interactions, micropore filling effects, electrostatic interaction. The regeneration experiments showed that GLMB possessed a good regeneration performance. Based on the experimental results and comparative analysis with other adsorbents, GLMB was an economical, high-efficiency, green and recyclable adsorbent for E2 removal from aqueous solution.

Determination of pyrethroid residues in herbal tea using temperature-controlled ionic liquid dispersive liquid-liquid microextraction by high performance liquid chromatography

A simple and effective method for determining five pyrethroid residues in herbal tea by ultrasound-enhanced temperature-controlled (UETC) ionic liquid dispersive liquid-liquid microextraction (IL-DLLME) coupled with high performance liquid chromatography-diode array detection (HPLC-DAD) was developed. The use of ultrasonication and heating improved the ability of the ionic liquid to extract the analytes. Various parameters that affect the extraction efficiency were investigated and optimized using single factor experiments and response surface design. The optimum conditions of the experiment were 121 µL of [HMIM][PF6] (extraction solvent), 794 µL of acetonitrile (dispersive solvent), a heating temperature of 40°C, a sonication time of 3.6 min and a pH of 2.9. Under optimized conditions, the linearity was in the range of 0.05–5 mg L⁻¹ with correlation coefficients above 0.9993. The limits of detection and quantification were 1.25–1.35 µg L⁻¹ and 5 µg L⁻¹, respectively. The mean recoveries of the five pyrethroids ranged from 74.02% to 109.01%, with RSDs below 9.04%. The proposed method was reliable for the analysis of pyrethroids in Chinese herbal tea.

Effective preparation of magnetic molecularly imprinted polymer nanoparticle for the rapid and selective extraction of cyfluthrin from honeysuckle

Cyfluthrin is a widely used pesticide. In this study, a sensitive and efficient magnetic molecularly imprinted polymer (MMIP) was prepared by surface molecular imprinting, which used functionalized Fe₃O₄ particles as magnetic cores. Cyfluthrin was extracted and enriched using magnetic molecularly polymer for analyzing pesticide residue of Chinese herbal medicines. The crystal type, microstructure, particle size, saturation magnetization, and characteristic functional groups of the synthesized MMIPs were analyzed by analysis equipment. The results of isothermal adsorption and kinetic adsorption indicated that MMIPs reached adsorption equilibrium at 30 min, with a maximum capacity of 4.9 mg g^-1, which had good adsorption performance, while selective adsorption experiments showed that MMIPs had higher affinity for cyfluthrin. Under the optimized conditions, the limit of detection (LOD) and the limit of quantification (LOQ) were 32.987 ng ml^-1 and 109.955 ng ml^-1, respectively. And linear range (30-3000ng ml^-1) of cyfluthrin with correlation coefficient R²=0.9979, and MMIPs were used in honeysuckle, the recoveries were 91.5%∼97.2%, and RSD was 5.35%∼8.32% (n = 3). It is indicated that the magnetic molecularly imprinted polymer can be used as an effective material for the specific separation of cyfluthrin from honeysuckle.

Liquid chromatographic determination of trace levels of nitrophenols in water samples after dispersive magnetic solid phase extraction

An efficient and fast dispersive magnetic solid phase extraction method was developed using MIL-101(Cr)/poly (mercaptobenzothiazole)@magnetite nanoparticles for the preconcentration and determination of nitrophenols in river and rain water samples. High-performance liquid chromatography-Ultraviolet instrument was applied for the analysis of target nitrophenols. The effect of several variables on the extraction performance was explored via design of experiment approach. Limits of detection and linear dynamic ranges were attained in the range of 0.05-0.10 µg/L and 0.2-250 µg/L, respectively. The enrichment factors were in the range of 317-363. The precision (n = 3) of dispersive magnetic solid phase extraction method was in the range of 5.3-6.8%. Eventually, the method was utilized for the analysis of target nitrophenols in river and rain water samples.

Facile preparation of reduced graphene oxide/ZnFe2O4 nanocomposite as magnetic sorbents for enrichment of estrogens

Reduced graphene oxide/ZnFe₂O₄ (rGO/ZnFe₂O₄) nanocomposite was facile prepared and applied as magnetic sorbent for the extraction of estrogens including 17β-estradiol, 17α-estradiol, estrone and hexestrol from water, soil, and fish samples prior to HPLC analysis. The rGO/ZnFe₂O₄ nanocomposite was characterized by scanning electron microscope, Fourier transform-infrared spectroscopy, X-ray diffraction, and vibrating sample magnetometer. The experimental parameters affecting the efficiency of magnetic solid-phase extraction (MSPE) including the amount of material, extraction time, pH, temperature, desorption solvents, desorption time, and desorption solvent volume were investigated respectively. With the developed method, good linearity was observed in the range of 0.05-500 ng/mL with the correlation coefficients (R²) between 0.9978 and 0.9993. The limits of detection (S/N = 3) and limits of quantification (S/N = 10) were achieved at 0.01-0.02 ng/mL and 0.05 ng/mL, respectively. The enrichment factors were calculated as the range of 241-288. Using rGO/ZnFe₂O₄ nanocomposite as the sorbent, the developed MSPE followed by HPLC analysis, was applied to analysis of estrogens in river water, soil and fish samples. The method has the potential application in the extraction and preconcentration ultra trace compounds in complex matrices, such as environmental and biological samples.

Fabrication of glucose-derived carbon-decorated magnetic microspheres for extraction of bisphenols from water and tea drinks

Glucose-derived carbon-decorated magnetic microspheres were synthesized by an easy hydrothermal carbonization method and used as a high-efficiency adsorbent to extract bisphenols in water and tea drinks. The as-prepared carbon-decorated magnetic microspheres had a well-defined core-shell structure with a shell thickness of about 5 nm. The microspheres possessed high saturation magnetization at 60.8 emu/g and excellent chemical stability in aqueous solution. The experimental parameters affecting the extraction efficiency, including extraction time, pH, adsorbent dosage, desorption solvents, desorption time, and solution volume were evaluated. Electrostatic and π-π interactions were the major driving forces during extraction. Overall, a new magnetic solid-phase extraction method of determining bisphenols was developed on the basis of as-prepared magnetic microspheres. The method had a wide linear range, low limits of detection (0.03-0.10 µg/L), and high recoveries (85.4-104.6%).

Determination of trace amounts of aromatic amines after magnetic solid-phase extraction using silver-modified Fe3 O4 /graphene nanocomposite

In this work, a fast and simple magnetic dispersive solid phase extraction methodology was developed utilizing Ag@magnetite nanoparticles@graphene nanocomposite as an efficient magnetic nanosorbent for preconcentration and determine of five aromatic amines in water samples. The sorbent was characterized by diverse characterization techniques. After the extraction, high-performance liquid chromatography with UV detection was utilized to analysis the aromatic amines. The effects of different factors on the extraction process were studied thoroughly via design of experiment and desirability function. Detection limits and linear dynamic ranges were obtained in the range of 0.10-0.20 and 0.3-300 μg/L, respectively. The relative standard deviations (n = 5) were in the range of 4.3-6.5%. Eventually, the method was employed for determination of target aromatic amines in various water samples.

Application of magnetized MOF-74 to phthalate esters extraction from Chinese liquor

In this study, magnetized MOF-74 (Ni) was prepared using an ultrasound-assisted synthesis method. This novel functional magnetic adsorbent was characterized using various techniques. Using the prepared material as adsorbents, a magnetic solid-phase extraction method coupled with high-performance liquid chromatography was proposed for determining four phthalate esters in Chinese liquor samples. The extraction parameters, including solution pH, adsorbent amount, extraction time, and eluent type and volume, were optimized. Under the optimized conditions, proposed method showed good linearity within the range of 1.53-200 μg/L for diphenyl phthalate, 2.03-200 μg/L for butyl benzyl phthalate, 7.02-200 μg/L for diamyl phthalate, and 6.03-200 μg/L for dicyclohexyl phthalate, with correlation coefficients > 0.9944, low limits of detection (0.46-2.10 μg/L, S/N = 3), and good extraction repeatability (relative standard deviations of 3.7%, n = 6). This method was successfully used to analyze phthalate esters in Chinese liquor samples with recoveries of 74.4-104.8%. Two phthalate esters were detected in two samples, both at concentrations that satisfied the Chinese national standard, indicating this method has practical application prospects. The extraction efficiency of this method was also compared with conventional solid-phase extraction using commercial C₁₈ cartridges. The results demonstrated that the proposed magnetic solid-phase extraction is a simple, time-saving, efficient, and low-cost method.