Risk assessment of broflanilide for human and non-target terrestrial organisms in cauliflower production

Broflanilide is a newly-developed meta-diamide insecticide, proposed for the control of a wide variety of chewing pests on many crops. In view of the proposed use of broflanilide and its environmental fate, it may be exposed to consumers and non-target organisms, which adversely affect human and the environment. In this paper, a rapid, sensitive and valid UPLC-MS/MS method was established for simultaneous analysis of broflanilide and its two major metabolites, DM-8007 and S (PFP-OH)-8007, in cauliflower. Then, the dissipation behaviors and final residues of broflanilide and its two major metabolites in cauliflower from eight sites with different climatic conditions in China were studied via the described analytical method. In addition, the acute toxicity test of 9.5 % suspension concentrate of broflanilide, broflanilide standard, DM-8007 and S (PFP-OH)-8007 were conducted to non-target terrestrial organisms. Risk assessment for human and non-target terrestrial organisms in cauliflower production was evaluated based on the maximum annual application rates and intervals. The results showed that the highest residue of broflanilide detected in cauliflower samples was all lower than the corresponding MRLs (2 mg/kg) in Japan. Chronic food dietary risk estimates for broflanilide do not exceed 50 % for all the Chinese population groups. Moreover, broflanilide is of low acute toxicity to birds and earthworm, while broflanilide and its metabolites is classified as highly toxic to adult honeybees. Acute risks of broflanilide to birds and earthworms were deemed to be acceptable in a realistic worst-case scenario, while its risk to adult honeybees and ladybug was unacceptable. A protection statement for honeybees and ladybug is required to recognize the high toxicity of broflanilide on related product labels. The study will be conducive to provide guidance for the rational application of broflanilide in cauliflower production.

Dissipation and dietary exposure risk assessment of spinosad, thiocyclam, and its metabolite nereistoxin in cucumber and groundwater for different population groups

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) technique using ultrahigh-performance liquid chromatography with tandem mass spectrometry for the analysis of spinosad (spinosyn A + spinosyn D), thiocyclam, and nereistoxin in cucumber was developed with mean recoveries of 93-104%, relative standard deviations of ≤9%, and limits of quantification of 0.01 mg/kg. Field trials of spinosad and thiocyclam were performed in 12 representative cultivating areas in China. Field trial results indicate that spinosyn A and spinosyn D easily dissipated in cucumber with half-lives of 2.48-6.24 and <3 days, respectively. Nereistoxin was produced after thiocyclam application and was more persistent than its parent. The terminal residues of spinosad were all below the maximum residue limits (0.2 mg/kg) in China, whereas the terminal concentration of nereistoxin (calculated as the stoichiometric equivalent of thiocyclam), which was much higher than that of thiocyclam, was far beyond the maximum residue limits of thiocyclam in cucumber (0.01 mg/kg) established by the European Union. The predicted no-effect concentrations of spinosyn A, spinosyn D, thiocyclam, and nereistoxin leaching into groundwater were estimated using China-PEARL (Pesticide Emission Assessment at Regional and Local scales) models after application. However, the dietary (food and water) exposure risk quotient for different populations was below 1 with a preharvest interval set at 5 days after the last application, indicating that the application of spinosad and thiocyclam in cucumber was unlikely to pose unacceptable risk for human health. This study provides data for the safe use of spinosad and thiocyclam in cucumber ecosystem.

Hydrolytic Behavior of Novel Pesticide Broflanilide and Its Dissipative Properties in Different Types of Soils

All pesticides are toxic by nature and pose short- or long-term safety risks to human or the environment, especially when they were used extensively and absence of safety measures. As a new insecticidal active compound with a novel mechanism of action, there is a serious inadequate of information on the hydrolytic behavior of broflanilide in the aqueous environment, as well as its degradation pattern in agricultural soils. In particular, the effects of temperature and pH of the aqueous environment on its hydrolytic behaviors and the dissipation pattern in different types of agricultural soils were still in a dark box. And the further understanding and insights into this insecticidal active ingredient were being deeply conditioned by these doubts. The hydrolysis behavior of broflanilide and the dissipation pattern in soil were systematically investigated by constructing hydrolysis systems with different temperatures and pH values, and conducting spiking experiments in different types of agricultural soil in the laboratory. The obtained results showed that the longest hydrolysis half-life of 10 mg/L broflanilide at 25 °C was 43.32 h (in pH 4.0 buffer), while it was only 12.84 h in pH 9.0 buffer. In pH 7.0 buffer, the hydrolysis rate of broflanilide exhibited a significant temperature dependence, as shown by the fact that for every 10 °C increase in the system temperature, the corresponding hydrolysis rate will increase about 1.5 times. The dissipation experiments in soils showed that broflanilide was most rapidly dissipated in fluvo-aquic soil (half-life of 1.94 days), followed by lime concretion black soil (half-life of 2.53 days) and cinnamon soil (half-life of 3.11 days), and slower in paddy soil (half-life of 4.03 days). It was indicated that broflanilide was a readily degradable pesticide in both aqueous environment and agricultural soil, and it was significantly affected by the temperature and pH of the system.

Photolysis of the novel meta-diamide insecticide broflanilide in solutions: Kinetics, degradation pathway, DFT calculation and ecotoxicity assessment

Broflanilide, as a novel meta-diamide insecticide, presents high bioactivity against agricultural pests. However, there was limited report regarding the photolysis fate of broflanilide. In this study, the photodegradation kinetics and influence factors of broflanilide, including different solvents, pH, iron, S₂O₈^2- and SO₃^2- were investigated under UV condition, and the reaction mechanism and transformation pathway were explored. The reaction rates (k) showed solvent-specificity in ultrapure water (0.015 min^-1), ethyl acetate (0.051 min^-1), methanol (0.084 min^-1) and acetonitrile (0.193 min^-1), correspondingly. The photolysis of broflanilide was slowest in the acid condition (pH = 4.0) compared with that in the neutral (pH = 7.0) and alkaline (pH = 9.0) conditions. The iron (Fe²⁺ and Fe³⁺) presented significant inhibition on the photodegradation due to the light shielding effect. Additionally, the UV/peroxydisulfate (S₂O₈^2-) and UV/sulfite (SO₃^2-) technologies could effectively accelerate the photodegradation of broflanilide, which has the potential for rapid treatment of pesticides in the aqueous environment. Six transformation products (TPs) were detected in water, peroxydisulfate and sulfite solutions, and the possible transformation pathways, including dehalogenation, cyclization, N-dealkylation, oxidation, reduction and hydrolysis, were proposed. Importantly, the reaction mechanism was explained through the analysis of molecular electrostatic potential and molecular orbitals. The predicted toxicity of the TPs indicated that several highly toxic TPs need to pay more attention in future risk assessments. This study provides a new perspective for evaluating the ecological fate and risks of pesticides.

Insights into the Fate of the Novel Pesticide Vanisulfane from Animal Manure in Plant-Soil Systems: Assisted by Carbon-14 Labeling

Pesticide use can result in plant residues, which can be ingested by livestock consuming plant-derived feed and appear in manure. When this manure is applied as a fertilizer, pesticides can contaminate plant-soil systems. Few studies have focused on pesticide infiltration from applying pesticide-contaminated manure to land. In this study, the fate of pesticide vanisulfane from chicken manure was studied in radish-soil and cabbage-soil systems assisted by carbon-14 labeling. Vanisulfane and its metabolites mostly appeared as bound residues (BRs) after introduction, and BR release was found at 35 d. Notably, manure contaminated with vanisulfane and its metabolites exhibited higher plant accumulation and phytotoxicity than manure contaminated with only the parent. Four metabolites were identified, and germination toxicity assays illustrated that a metabolite with an aldehyde structure induced phytotoxicity. This study provides valuable information on pesticide contamination from manure and emphasizes the importance of considering pesticide metabolites when assessing environmental risks.

Trace determination of imidacloprid and its major metabolites in wheat-soil system

Trace analysis method is a reliable basis for studying the translocation and metabolism of imidacloprid used as an insecticide in wheat, and it clarifies whether biologically active metabolites including residual imidacloprid, have long-lasting insecticidal potency against wheat aphids under seed treatment during the entire growth period. In this study, a highly sensitive analytical method was established to determine the residues of imidacloprid and its six metabolites (5-hydroxy imidacloprid, imidacloprid olefin, imidacloprid guanidine, imidacloprid urea, 6-chloronicotinic acid and imidacloprid nitrosimine) in wheat-soil systems, such as in wheat leaves, wheat ears, wheat grains, roots and soil. All the compounds were extracted using an ACN:water (8:2, v/v) mixture and purified by dispersive solid-phase extraction. The average recoveries ranged from 74.4 to 109.5% for all matrices, with intra- and inter-day variations of less than 14.9%. The limit of quantitation was in the range of 0.001 to 0.005 mg/kg. The method is demonstrated to be sensitive and accurate for monitoring imidacloprid and its metabolites at trace levels during the entire growth period under field conditions. This article is protected by copyright. All rights reserved.

Residues Analysis and Dissipation Dynamics of Broflanilide in Rice and Its Related Environmental Samples

Herein, we present a method for the quantitative analysis of broflanilide residues in water, soil, and rice samples from a paddy field in Jiangxi Province, China. The quick, easy, cheap, effective, rugged, and safe (QuEChERS) method was optimized for the extraction and purification of broflanilide residues. Residual broflanilide concentrations in different matrices were then determined by high-performance liquid chromatography (HPLC). The calibration curve of broflanilide showed good linearity in all matrices for concentrations between 0.005 and 1 mg·L⁻¹, with a correlation coefficient greater than 0.99. The matrix effect varied from −69% to −54%, indicating matrix suppression. The average recoveries ranged between 85.82% and 97.46%, with relative standard deviations of 3.29%–8.15%. The limits of detection ranged from 0.16 to 1.67 μg·kg⁻¹, and the limits of quantification were in the range of 0.54 to 5.48 μg·kg⁻¹. Dissipation dynamic tests indicated broflanilide half-lives of 0.46–2.46, 2.09–5.34, and 1.31–3.32 days in soil, water, and rice straw, respectively. Broflanilide was dissipated more rapidly in water than in soil and rice straw. More than 90% of broflanilide residues dissipated within 14 days. The final residues of broflanilide in rice were all below LOQ at harvest.

Optimized residue analysis method for broflanilide and its metabolites in agricultural produce using the QuEChERS method and LC-MS/MS

Since broflanilide is a newly developed pesticide, analytical methods are required to determine the corresponding pesticide residues in diverse crops and foods. In this study, a pesticide residue analysis method was optimized for the detection and quantification of broflanilide and its two metabolites, DM-8007 and S(PFH-OH)-8007, in brown rice, soybean, apple, green pepper, mandarin, and kimchi cabbage. Residue samples were extracted from the produce using QuEChERS acetate and citrate buffering methods and were purified by dispersive solid-phase extraction (d-SPE) using six different adsorbent compositions with varying amounts of primary secondary amine (PSA), C₁₈, and graphitized carbon black. All the sample preparation methods gave low-to-medium matrix effects, as confirmed by liquid chromatography–tandem mass spectrometry using standard solutions and matrix-matched standards. In particular, the use of the citrate buffering method, in combination with purification by d-SPE using 25 mg of PSA and a mixture of other adsorbents, consistently gave low matrix effects that in the range from −18.3 to 18.8%. Pesticide recoveries within the valid recovery range 70–120% were obtained both with and without d-SPE purification using 25 mg of PSA and other adsorbents. Thus, the developed residue analysis method is viable for the determination of broflanilide and its metabolites in various crops.

Analytical methods to analyze pesticides and herbicides

Presented in this paper is an annual review of literatures published in 2018 on topics relating to analytical methods for pesticides and herbicides. According to the different techniques, this review is divided into six sections, including extraction methods; chromatographic or mass spectrometric techniques; electrochemical techniques; spectrophotometric techniques; chemiluminescence and fluorescence methods; and biochemical assays. PRACTITIONER POINTS: Totally 134 relevant research articles are summarized. The review is divided into six parts according to the techniques. Chromatographic and mass spectrometric methods are the most widely used.