Comparison of round-window membrane mechanics before and after experimental stapedotomy

Does stapedotomy improve high frequency conductive hearing?

OBJECTIVES

Stapedotomy is performed to address conductive hearing deficits. While hearing thresholds reliably improve at low frequencies (LF), conductive outcomes at high frequencies (HF) are less reliable and have not been well described. Herein, we evaluate post-operative HF air-bone gap (ABG) changes and measure HF air conduction (AC) thresholds changes as a function of frequency.

METHODS

Retrospective review of patients who underwent primary stapedotomy with incus wire piston prosthesis between January 2016 and May 2020. Pre- and postoperative audiograms were evaluated. LF ABG was calculated as the mean ABG of thresholds at 250, 500, and 1000 Hz. HF ABG was calculated at 4 kHz.

RESULTS

Forty-six cases met criteria. Mean age at surgery was 54.0 ± 11.7 years. The LF mean preoperative ABG was 36.9 ± 11.0 dB and postoperatively this significantly reduced to 9.35 ± 6.76 dB, (P < .001). The HF mean preoperative ABG was 31.1 ± 14.4 dB and postoperatively, this also significantly reduced to 14.5 ± 12.3 dB, (P < .001). The magnitude of LF ABG closure was over 1.5 times the magnitude of HF ABG closure (P < .001). The gain in AC decreased with increasing frequency (P < .001).

CONCLUSION

Hearing improvement following stapedotomy is greater at low than high frequencies. Postoperative air bone gaps persist at 4 kHz. Further biomechanical and histopathologic work is necessary to localize postoperative high frequency conductive hearing deficits and improve stapedotomy hearing outcomes.

LEVEL OF EVIDENCE

4, retrospective study.

Measurement of Wideband Absorbance as a Test for Otosclerosis

The purpose of this study was to investigate the effectiveness of wideband energy absorbance in diagnosing otosclerosis by comparing the differences in acoustic absorbance between otosclerotic and normal ears. Exactly 90 surgically confirmed otosclerotic ears were included in the test group. The control group consisted of 126 matched normal-hearing subjects. The Titan hearing test platform (Interacoustics) was used for absorbance and acoustic immittance tests. Energy absorbance, measured at tympanometric peak pressure, was analyzed in the range 226–8000 Hz. Differences between normal and otosclerotic ears were analyzed in quarter-octave bands. Wideband absorbance, i.e., absorbance averaged over the 226–2000 Hz band, and resonance frequency were calculated and compared between normal and otosclerotic ears. Significant differences between the absorbance of normal and otosclerotic ears were found, especially at low and middle frequencies. No significant effect of ear side or gender was observed. For average wideband absorbance and resonance frequency, less pronounced (although significant) differences were found between normal and otosclerotic ears. Measurement of peak-pressure energy absorbance, averaged over a frequency band around 650 Hz, provides a valid criterion in testing for otosclerosis. The test is highly effective, with a sensitivity and specificity of over 85% and area under receiver operating characteristic curve above 0.9. Average wideband absorbance can also be used, but its effectiveness is lower. Other immittance-related measures are considerably less effective.

Round Window Membrane Motion Induced by Bone Conduction Stimulation at Different Excitation Sites: Methodology of Measurement and Data Analysis in Cadaver Study

OBJECTIVES

The aim of this study was to investigate the following: (1) the vibration pattern of the round window (RW) membrane in human cadavers during air (AC) and bone conduction (BC) stimulation at different excitation sites; (2) the effect of the stimulation on the fluid volume displacement (VD) at the RW and compare the VD between BC and AC stimulation procedures; (3) the effectiveness of cochlear stimulation by the bone implant at different excitation sites.

DESIGN

The RW membrane vibrations were measured by using a commercial scanning laser Doppler vibrometer. The RW vibration amplitude was recorded at 69 measurement points evenly distributed in the measurement field covering the entire surface of the RW membrane and a part of the surrounding bony surface. RW vibration was induced first with AC and then with BC stimulation through an implant positioned at two sites. The first site was on the skull surface at the squamous part of the temporal bone (implant no. 1), a place typical for bone-anchored hearing aids. The second site was close to the cochlea at the bone forming the ampulla of the lateral semicircular canal (implant no. 2). The displacement amplitude (dP) of the point P on the promontory was determined and used to calculate the relative displacement (drRW) of points on the RW membrane, drRW = dRW - dP. VD parameter was used to analyze the effectiveness of cochlear stimulation by the bone implant screwed at different excitation sites.

RESULTS

RW membrane displacement amplitude of the central part of the RW was similar for AC and BC implant no. 1 stimulation, and for BC implant no. 2 much larger for frequency range >1 kHz. BC implant no. 2 causes a larger displacement amplitude of peripheral parts of the RW and the promontory than AC and BC implant no. 1, and BC implant no. 1 causes larger than AC stimulation. The effect of BC stimulation exceeds that of AC with identical intensity, and that the closer BC stimulation to the otic capsule, the more effective this stimulation is. A significant decrease in the value of VD at the RW is observed for frequencies >2 kHz for both AC and BC stimulation with BC at both locations of the titanium implant placement. For frequencies >1 kHz, BC implant no. 2 leads to a significantly larger VD at the RW compared to BC implant no. 1. Thus, the closer to the otic capsule the BC stimulation is located, the more effective it is.

CONCLUSIONS

Experimental conditions allow for an effective acoustic stimulation of the inner ear by an implant screwed to the osseous otic capsule. The mechanical effect of BC stimulation with a titanium implant placed in the bone of the ampulla of the lateral semicircular canal significantly exceeds the effect of an identical stimulation with an implant placed in the temporal squama at a conventional site for an implant anchored in the bone. The developed research method requires the implementation on a larger number of temporal bones in order to obtain data concerning interindividual variability of the observed mechanical phenomena.

Design of a resilient ring for middle ear's chamber stapes prosthesis

This paper presents the process of designing a new elastic element replacing a membrane in the chamber stapes prosthesis (ChSP). The results of the study are volume displacement characteristics obtained for the prosthesis and physiological stapes. Simulation tests on a 3D CAD model have confirmed that a properly designed ring can stimulate perilymph with the same or greater efficacy as the physiological stapes footplate placed on the elastic annular ligament. The ChSP with a new elastic element creates a good chance of improving hearing in patients suffering from otosclerosis.

New chamber stapes prosthesis - A preliminary assessment of the functioning of the prototype

Piston-stapedotomy is the most common method for hearing restoration in patients with otosclerosis. In this study, we have experimentally examined a prototype of a new chamber stapes prosthesis. The prototype was implanted in a human cadaver temporal bone. The round window vibrations before and after implantation were measured for the acoustic signal (90 dB SPL, 0.8–8 kHz) in the external auditory canal. In comparison with a 0.4-mm piston prosthesis, the chamber prosthesis induced significantly higher vibration of the round window, especially for frequencies above 1.5 kHz. Based on the results, it can be surmised that stapedotomy with a chamber stapes prosthesis could provide better hearing results in comparison with the piston-stapedotomy.

Effect of different stapes prostheses on the passive vibration of the basilar membrane

The effect of different stapes prostheses on the basilar membrane (BM) motion was determined. To that end, a three dimensional finite element (FE) model of the passive human cochlea was developed. Passive responses of the BM were found based on coupled fluid-structure interactions between the cochlear solid structures and the scala fluids. The passive BM vibrations in normal (healthy) cochlea were compared with vibrations in the cochlea in which a 0.4-mm piston or a proposed new type of prosthesis was implanted. The proposed chamber prosthesis was not experimentally implanted, but only numerically simulated. Design of the new chamber stapes prosthesis is presented for the first time in this paper. The simulation results showed 10-20 dB decrease in BM displacement amplitude in the case of the piston. In contrast, the BM responses in the cochlea with the new prosthesis are higher with respect to the healthy ear. The results obtained in this study are promising for further research to optimize the design of the new chamber stapes prosthesis.

A three-dimensional finite element model of round window membrane vibration before and after stapedotomy surgery

Piston stapes prostheses are implanted in patients with refractory conductive or mixed hearing loss due to stapes otosclerosis to stimulate the perilymph with varying degrees of success. The overclosure effect described by the majority of researchers affects mainly low and medium frequencies, and a large number of patients report a lack of satisfactory results for frequencies above 2 kHz. The mechanics of perilymph stimulation with the piston have not been studied in a systematic manner. The objective of this study was to assess the influence of stapedotomy surgery on round window membrane vibration and to estimate the postoperative outcomes using the finite element (FE) method. The study hypothesis is that the three-dimensional FE model developed of the human inner ear, which simulates the round window (RW) membrane vibration, can be used to assess the influence of stapedotomy on auditory outcomes achieved after the surgical procedure. An additional objective of the study was to enable the simulation of RW membrane vibration after stapedotomy using a new type of stapes prosthesis currently under investigation at Warsaw University of Technology. A three-dimensional finite element (FE) model of the human inner ear was developed and validated using experimental data. The model was then used to simulate the round window membrane vibration before and after stapedotomy surgery. Functional alterations of the RW membrane vibration were derived from the model and compared with the results of experimental measurements from temporal bones of a human cadaver. Piston stapes prosthesis implantation causes an approximately fivefold (14 dB) lower amplitude of the RW membrane vibrations compared with normal anatomical conditions. A satisfactory agreement between the FE model and the experimental data was found. The new prosthesis caused an increase of 20–30 dB in the RW displacement amplitude compared with the 0.4-mm piston prosthesis. In all frequencies, the FE model predicted a RW displacement curve that was above the experimental curves for the normal ear. The stapedotomy can be well simulated by the FE model to predict the auditory outcomes achieved following this otosurgery procedure. The 3D FE model developed in this study may be used to optimize the geometry of a new type of stapes prosthesis in order to achieve a similar sound transmission through the inner ear as for a normal middle ear. This should provide better auditory outcomes for patients with stapedial otosclerosis.