Amphiphilic Branched Polymers as Antimicrobial Agents

Soft nanoparticles as antimicrobial agents and carriers of microbiocides for enhanced inhibition activity

Antibiotic resistance continues to pose significant health challenges. Considering severe limitations in the discovery and supply of new antibiotics, there is an unmet need to design alternative and more effective strategies for addressing this global issue. Use of polymeric nanoparticles with cationic shell surfaces offers a highly promising approach to coupling their inherent bactericidal action with sustained delivery of small lipophilic microbicides. We have utilized this platform for assembling multi-tasking soft core-shell nanoparticles from star polymers with the desired asymmetric arm composition. These stable nanoparticles with low critical micelle concentration imparted intrinsic antimicrobial potency due to high positive charge density in the corona, as well as the loading of active biocidal agents (such as curcumin and terbinafine) for potential dual and coadjuvant inhibition. This strategic combination allows for both immediate (direct contact) and extended (drug delivery) antibacterial activities for better therapeutic efficacy. Micellar nanoparticles with and without therapeutic cargo were highly efficient against both Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis), representative Gram-negative and Gram-positive bacteria, respectively. Interestingly, we observed bacteria- and concentration-dependent effects, in which higher concentrations of charged nanoparticles were more effective against E. coli, whereas B. subtilis was inhibited only at lower concentrations. This work highlights a valuable platform to achieve combination therapy through nanoparticles with charged coronas and delivery of potent therapeutics to overcome antimicrobial resistance.

Versatile polymer-based strategies for antibacterial drug delivery systems and antibacterial coatings

Human health damage and economic losses due to bacterial infections are very serious worldwide. Excessive use of antibiotics has caused an increase in bacterial resistance. Fortunately, various non-antibiotic antibacterial materials...

Functionalized Silver Nanocapsules with Improved Antibacterial Activity Using Silica Shells Modified with Quaternary Ammonium Polyethyleneimine as a Bacterial Cell-Targeting Agent

Silver nanoparticles (AgNPs) have remarkable and broad-spectrum antibacterial activities against Gram-positive (G+) and Gram-negative bacteria (G-). However, the negative surface potential of AgNPs limits their antibacterial activities due to the electrostatic repulsion with the negatively charged bacterial cell membrane. To address the limitation, AgNPs were loaded in the mesoporous silica nanoparticles by preparing silver core-mesoporous silica shell nanocapsules (Ag@MSNs), and then, a cationic antibacterial polymer, quaternary ammonium polyethyleneimine (QPEI), was used to modify Ag@MSNs for improving their surface potential and antibacterial activities. The results showed that the obtained Ag@MSN-QPEI exhibited a high positive surface potential (+39.6 mV) and a strong electrostatic attraction with Pseudomonas syringae pv. lachrymans cells in coculture, resulting in an excellent bacterial cell-targeting effect. At the same concentration, Ag@MSN-QPEI exhibited less silver content (reducing the silver content of Ag@MSNs by 19%), higher antibacterial activities, and longer effective duration against Clavibacter michiganensis subsp. michiganensis (G+) and P. syringae pv. lachrymans (G-) than Ag@MSNs and QPEI alone. The excellent bacterial cell-targeting effect and synergistic antibacterial action combined with QPEI accounted for the significantly enhanced antibacterial activities of Ag@MSN-QPEI. Therefore, using a cationic antibacterial polymer to confer the bacterial cell-targeting effect and synergistic antibacterial action would be extended to other antimicrobial materials.

Dendrimers against fungi - A state of the art review

Fungal based diseases currently affect nearly a quarter of the population around the world, which diseases are usually limited to superficial infections. Perversely, along with the development of modern medicine, cases of life-threatening systemic fungi are more and more often encountered. Compared to antibacterial drugs, significantly fewer fungicides are tested and introduced to clinical practice. At the same time, the drug resistance of pathological fungi is constantly growing. In addition to obtaining new derivatives of already-established classes of drugs, such as azoles, there is a growing interest in new compounds with potentially new mechanisms and application possibilities. Polymers are included in the flow of these studies, and among them - dendrimers. Dendrimers are a special type of polymers with a strictly defined structure and a plethora of functionalization possibilities. This allows them to not only be used as effective antifungal drug carriers but also enables them to exhibit antifungal activity per se. In this review, we have introduced to the epidemiology of fungal infections and summarized the aspects related to their control and therapy. Various polymers and dendrimers with antifungal activity were presented. In the subsequent sections antifungal acting dendrimers were discussed within three subchapters, based on their chemical structure: (i) amino acid-based dendrimers, (ii) amino based dendrimers, and (iii) other, which do not share similarities in structure. We have gathered and summarized the reports regarding the direct action of dendrimers on infectious fungi, as well as their effect when used as solubilizers, carriers or adjuvants with currently used antifungals. Use of dendrimers for the sensing of fungi or their metabolites are also considered. Special attention was also paid to the applications of dendrimers together with photosensitizers in antimicrobial photodynamic therapy.

An eco-friendly in situ activatable antibiotic via cucurbit[8]uril-mediated supramolecular crosslinking of branched polyethylenimine

We report an unprecedented, eco-friendly, in situ activatable model antibiotic, phenylalanyl-polyethylenimine (PhePEI), to potentially diminish antibiotic pollution of the environment and associated antibiotic resistance. The inactive PhePEI can be reversibly activated upon supramolecular crosslinking by cucurbit[8]uril, conferring potent antibacterial activity.

Novel Antibacterial Polyglycidols: Relationship between Structure and Properties

Antimicrobial polymers are an attractive alternative to low molecular weight biocides, because they are non-volatile, chemically stable, and can be used as non-releasing additives. Polymers with pendant quaternary ammonium groups and hydrophobic chains exhibit antimicrobial properties due to the electrostatic interaction between polymer and cell wall, and the membrane disruptive capabilities of the hydrophobic moiety. Herein, the synthesis of cationic⁻hydrophobic polyglycidols with varying structures by post-polymerization modification is presented. The antimicrobial properties of the prepared polyglycidols against E. coli and S. aureus are examined. Polyglycidol with statistically distributed cationic and hydrophobic groups (cationic⁻hydrophobic balance of 1:1) is compared to (i) polyglycidol with a hydrophilic modification at the cationic functionality; (ii) polyglycidol with both-cationic and hydrophobic groups-at every repeating unit; and (iii) polyglycidol with a cationic⁻hydrophobic balance of 1:2. A relationship between structure and properties is presented.

Antifouling and antimicrobial biomaterials: an overview

The use of implantable medical devices is a common and indispensable part of medical care for both diagnostic and therapeutic purposes. However, as side effect, the implant of medical devices quite often leads to the occurrence of difficult-to-treat infections, as a consequence of the colonization of their abiotic surfaces by biofilm-growing microorganisms increasingly resistant to antimicrobial therapies. A promising strategy to combat device-related infections is based on anti-infective biomaterials that either repel microbes, so they cannot attach to the device surfaces, or kill them in the surrounding areas. In general, such biomaterials are characterized by antifouling coatings, exhibiting low adhesion or even repellent properties towards microorganisms, or antimicrobial coatings, able to kill microbes approaching the surface. In this light, the present overview will address the development in the last two decades of antifouling and antimicrobial biomaterials designed to potentially limit the initial stages of microbial adhesion, as well as the microbial growth and biofilm formation on medical device surfaces.

Homoserine Lactone as a Structural Key Element for the Synthesis of Multifunctional Polymers

The use of bio-based building blocks for polymer synthesis represents a milestone on the way to "green" materials. In this work, two synthetic strategies for the preparation of multifunctional polymers are presented in which the key element is the functionality of homoserine lactone. First, the synthesis of a bis cyclic coupler based on a thiolactone and homoserine lactone is displayed. This coupler was evaluated regarding its regioselectivity upon reaction with amines and used in the preparation of multifunctional polymeric building blocks by reaction with diamines. Furthermore, a linear polyglycidol was functionalized with homoserine lactone. The resulting polyethers with lactone groups in the side chain were converted to cationic polymers by reaction with 3-(dimethylamino)-1-propylamine followed by quaternization with methyl iodide.

Development of biomaterial surfaces with and without microbial nanosegments

Infections by microorganisms are a major problem in public health throughout the world. Artificial materials, including biomedical goods, inherently lack defense against microbial development. Therefore, microbial cells can adhere on any type of artificial surface, particularly in a moist environment, and start to multiply to form a huge population. In this review, we will discuss a strategy for designing antimicrobial polymers and antimicrobial surfaces. Generally, there are five types of antimicrobial polymers: (a) polymeric biocides, (b) biocidal polymers, (c) biocide-releasing polymers, (d) bioactive oligopeptides, and (e) antimicrobial surfaces. Antimicrobial surfaces preventing the growth of microorganisms are a promising method to inhibit the spread of microbial infections. The antimicrobial surfaces can reject the attachment of microbes and/or kill microbes in the vicinity and can be designed to kill microbes on contact. It is recommended that the material surface not release biocidal substances, therefore preventing exhaustion of biocide release to kill microbes. Furthermore, the antimicrobial surfaces are desired to be nontoxic to human cells. The development of contact-active antimicrobial surfaces by grafting antimicrobial nanosegments onto the material surface will be an important topic in the future.

Waterborne physically crosslinked antimicrobial nanogels

Aqueous solutions of poly(ethylene imine) functionalized with decyl- and azetidinium groups form physically cross-linked antimicrobial nanogels.

Dual Propionibacterium acnes therapy using skin penetration-enhanced liposomes loaded with a photosensitizer and an antibiotic

Various antibiotics and photosensitizers are used for Propionibacterium acnes therapy. However, the success rate of therapy is limited because of antibiotic resistance, side-effects of photodynamic therapy using photosensitizer and the low skin-penetration efficiency of antibiotics and photosensitizers. In this study, to enhance the skin penetration efficiency, maintain their photodynamic activity and induce dual antibacterial therapeutic effects, we prepare erythromycin and branched polyethyleneimin-hematoporphyrin (bPEI-HPP) conjugates were loaded into liposomes (cationic photosensitizer-erythromycin loaded liposomes, CP-L (bPEI-HPP 10 mg; CP-L 1 and 20 mg; CP-L 2)). The tissue penetration efficiency of CP-Ls was determined by the Franz cell diffusion system and fluorescence microscopy. The penetration efficiency of CP-Ls is greater than that of bPEI-HPP, unloaded cationic photosensitizer and free HPP because CP-Ls comprised phospholipids that are similar to the cell membrane lipid composition. For in vitro antibacterial effects, Propionibacterium acnes (P. acnes) were used. The loss of viability rate of P. acnes by CP-L 2 (95%) from the colony forming unit (CFU) assay, was 2.4-fold higher than erythromycin-loaded liposomes (39%) and 1.9-fold higher than bPEI-HPP-loaded liposomes (50%). Therefore, we suggest that polycationic photosensitizer and antibiotic-loaded liposomes have potential applications in clinical photodynamic anti-bacterial therapy.

Antimicrobial polymethacrylates based on quaternized 1,3-thiazole and 1,2,3-triazole side-chain groups

Increasing antimicrobial and non-hemotoxic characteristics of polymers bearing thiazole and triazole groups by the appropriate selection of spacer and quaternization groups.

Antimicrobial hydrogels: a new weapon in the arsenal against multidrug-resistant infections

The rapid emergence of antibiotic resistance in pathogenic microbes is becoming an imminent global public health problem. Treatment with conventional antibiotics often leads to resistance development as the majority of these antibiotics act on intracellular targets, leaving the bacterial morphology intact. Thus, they are highly prone to develop resistance through mutation. Much effort has been made to develop macromolecular antimicrobial agents that are less susceptible to resistance as they function by microbial membrane disruption. Antimicrobial hydrogels constitute an important class of macromolecular antimicrobial agents, which have been shown to be effective in preventing and treating multidrug-resistant infections. Advances in synthetic chemistry have made it possible to tailor molecular structure and functionality to impart broad-spectrum antimicrobial activity as well as predictable mechanical and rheological properties. This has significantly broadened the scope of potential applications that range from medical device and implant coating, sterilization, wound dressing, to antimicrobial creams for the prevention and treatment of multidrug-resistant infections. In this review, advances in both chemically and physically cross-linked natural and synthetic hydrogels possessing intrinsic antimicrobial properties or loaded with antibiotics, antimicrobial polymers/peptides and metal nanoparticles are highlighted. Relationships between physicochemical properties and antimicrobial activity/selectivity, and possible antimicrobial mechanisms of the hydrogels are discussed. Approaches to mitigating toxicity of metal nanoparticles that are encapsulated in hydrogels are reviewed. In addition, challenges and future perspectives in the development of safe and effective antimicrobial hydrogel systems especially involving co-delivery of antimicrobial polymers/peptides and conventional antimicrobial agents for eventual clinical applications are presented.

Molecular design, structures, and activity of antimicrobial peptide-mimetic polymers

There is an urgent need for new antibiotics which are effective against drug-resistant bacteria without contributing to resistance development. We have designed and developed antimicrobial copolymers with cationic amphiphilic structures based on the mimicry of naturally occurring antimicrobial peptides. These copolymers exhibit potent antimicrobial activity against a broad spectrum of bacteria including methicillin-resistant Staphylococcus aureus with no adverse hemolytic activity. Notably, these polymers also did not result in any measurable resistance development in E. coli. The peptide-mimetic design principle offers significant flexibility and diversity in the creation of new antimicrobial materials and their potential biomedical applications.

Molecular interaction of a new antibacterial polymer with a supported lipid bilayer measured by an in situ label-free optical technique

The interaction of the antibacterial polymer-branched poly(ethylene imine) substituted with quaternary ammonium groups, PEO and alkyl chains, PEI25QI5J5A815-with a solid supported lipid bilayer was investigated using surface sensitive optical waveguide spectroscopy. The analysis of the optogeometrical parameters was extended developing a new composite layer model in which the structural and optical anisotropy of the molecular layers was taken into consideration. Following in situ the change of optical birefringence we were able to determine the composition of the lipid/polymer surface layer as well as the displacement of lipid bilayer by the antibacterial polymer without using additional labeling. Comparative assessment of the data of layer thickness and optical anisotropy helps to reveal the molecular mechanism of antibacterial effect of the polymer investigated.

Anti-biofouling 3D porous systems: the blend effect of oxazoline-based oligomers on chitosan scaffolds

The production, characterization and anti-biofouling activity of 3D porous scaffolds combining different blends of chitosan and oxazoline-based antimicrobial oligomers is reported. The incorporation of ammonium quaternized oligo(2-oxazoline)s into the composition of the scaffold enhances the stability of the chitosan scaffold under physiological conditions as well as its ability to repel protein adsorption. The blended scaffolds showed mean pore sizes in the range of 18-32 μm, a good pore interconnectivity and high porosity, as well as a large surface area, ultimate key features for anti-biofouling applications. Bovine serum albumin (BSA) adhesion profiles showed that the composition of the scaffolds plays a critical role in the chitosan-oligooxazoline system. Oligobisoxazoline-enriched scaffolds (20% w/w, CB8020) decreased protein adsorption (BSA) by up to 70%. Moreover, 1 mg of CB8020 was able to kill 99.9% of Escherichia coli cells upon contact, demonstrating its potential as promising material for production of tailored non-fouling 3D structures to be used in the construction of novel devices with applications in the biomedical field and water treatment processes.

Poly(ethylene imine)s as antimicrobial agents with selective activity

We report the structure-activity relationship in the antimicrobial activity of linear and branched poly(ethylene imine)s (L- and B-PEIs) with a range of molecular weights (MWs) (500-12,000). Both L- and B-PEIs displayed enhanced activity against Staphylococcus aureus over Escherichia coli. Both B- and L-PEIs did not cause any significant permeabilization of E. coli cytoplasmic membrane. L-PEIs induced depolarization of S. aureus membrane although B-PEIs did not. The low MW B-PEIs caused little or no hemolysis while L-PEIs are hemolytic. The low MW B-PEIs are less cytotoxic to human HEp-2 cells than other PEIs. However, they induced significant cell viability reduction after 24 h incubation. The results presented here highlight the interplay between polymer size and structure on activity.

Antifouling ultrafiltration membranes via post-fabrication grafting of biocidal nanomaterials

Ultrafiltration (UF) membranes perform critical pre-treatment functions in advanced water treatment processes. In operational systems, however, biofouling decreases membrane performance and increases the frequency and cost of chemical cleaning. The present work demonstrates a novel technique for covalently or ionically tethering antimicrobial nanoparticles to the surface of UF membranes. Silver nanoparticles (AgNPs) encapsulated in positively charged polyethyleneimine (PEI) were reacted with an oxygen plasma modified polysulfone UF membrane with and without 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) present. The nucleophilic primary amines of the PEI react with the electrophilic carboxyl groups on the UF membrane surface to form electrostatic and covalent bonds. The irreversible modification process imparts significant antimicrobial activity to the membrane surface. Post-synthesis functionalization methods, such as the one presented here, maximize the density of nanomaterials at the membrane surface and may provide a more efficient route for fabricating diverse array of reactive nanocomposite membranes.