Doubly Biomimetic Catecholic Phosphorylcholine Copolymer: A Platform Strategy for Fabricating Antifouling Surfaces

Package delivered: folate receptor-mediated transporters in cancer therapy and diagnosis

Neoplasias pose a significant threat to aging society, underscoring the urgent need to overcome the limitations of traditional chemotherapy through pioneering strategies. Targeted drug delivery is an evolving frontier in cancer therapy, aiming to enhance treatment efficacy while mitigating undesirable side effects. One promising avenue utilizes cell membrane receptors like the folate receptor to guide drug transporters precisely to malignant cells. Based on the cellular folate receptor as a cancer cell hallmark, targeted nanocarriers and small molecule-drug conjugates have been developed that comprise different (bio) chemistries and/or mechanical properties with individual advantages and challenges. Such modern folic acid-conjugated stimuli-responsive drug transporters provide systemic drug delivery and controlled release, enabling reduced dosages, circumvention of drug resistance, and diminished adverse effects. Since the drug transporters' structure-based de novo design is increasingly relevant for precision cancer remediation and diagnosis, this review seeks to collect and debate the recent approaches to deliver therapeutics or diagnostics based on folic acid conjugated Trojan Horses and to facilitate the understanding of the relevant chemistry and biochemical pathways. Focusing exemplarily on brain and breast cancer, recent advances spanning 2017 to 2023 in conjugated nanocarriers and small molecule drug conjugates were considered, evaluating the chemical and biological aspects in order to improve accessibility to the field and to bridge chemical and biomedical points of view ultimately guiding future research in FR-targeted cancer therapy and diagnosis.

Cell-membrane-inspired polymers for constructing biointerfaces with efficient molecular recognition

Fabrication of devices that accurately recognize, detect, and separate target molecules from mixtures is a crucial aspect of biotechnology for applications in medical, pharmaceutical, and food sciences. This technology has also been recently applied in solving environmental and energy-related problems. In molecular recognition, biomolecules are typically complexed with a substrate, and specific molecules from a mixture are recognized, captured, and reacted. To increase sensitivity and efficiency, the activity of the biomolecules used for capture should be maintained, and non-specific reactions on the surface should be prevented. This review summarizes polymeric materials that are used for constructing biointerfaces. Precise molecular recognition occurring at the surface of cell membranes is fundamental to sustaining life; therefore, materials that mimic the structure and properties of this particular surface are emphasized in this article. The requirements for biointerfaces to eliminate nonspecific interactions of biomolecules are described. In particular, the major issue of protein adsorption on biointerfaces is discussed by focusing on the structure of water near the interface from a thermodynamic viewpoint; moreover, the structure of polymer molecules that control the water structure is considered. Methodologies enabling stable formation of these interfaces on material surfaces are also presented.

Effect of zirconia surface modification using dopamine polymerisation on the shear bond strength of resin cement

This study evaluated the influence of polydopamine treatment on the surface properties and bond strength of yttria-stabilised tetragonal zirconia polycrystal (Y-TZP). Sixty-three zirconia blocks (10 × 10 × 2 mm) were randomly divided into three groups defined by surface treatment: (i) control group (C), (ii) grit-blasted with 110 μm alumina particles (GB), and (iii) polydopamine (PDA) coating. The surfaces of specimens subjected to different treatments were investigated by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and water contact angle measurements. After the surface treatments, the specimens were cemented to resin composite cylinders. After bonding, the shear bond strength of the ceramic to the resin was measured, and the failure mode of each specimen was analysed using a stereomicroscope. The results indicated that the shear bond strength is highest for the GB treatment and lowest for the controls. However, the difference between groups GB and PDA was not statistically significant. In the control group, adhesive failure was predominant, whereas in the treatment groups, mixed mode failure was predominant. The pre-treatment of Y-TZP ceramic with the polydopamine coating might improve the bond strength of the resin cement to the zirconia ceramic.

Anchorable phosphorylcholine copolymer synthesis and cell membrane mimetic antifouling coating fabrication for blood compatible applications

Protein adsorption and platelet activation on biomedical devices contacting blood may lead to the formation of thrombus. The thrombogenicity of biomaterials could be minimized or prevented by anchoring a cell membrane mimetic antifouling coating (CMMAC). Here, we report the construction of a CMMAC by a newly designed 2-methacryloyloxyethyl phosphorylcholine (MPC) copolymer (PMPCC) containing 5-20 carboxylic long arm side chains. The long arm provides its end carboxylic group with more freedom and a larger reaction space for an easier and more efficient surface anchoring. With the assistance of mussel-inspired universal adhesive polydopamine (PDA), different material surfaces precoated with PDA can immobilize the PMPCC via multipoint anchoring of the randomly distributed carboxylic side chains. The multipoint anchoring results in a stabilized and condensed PDA-PMPCC coating. The phosphorylcholine zwitterions of the densely immobilized PMPCC polymers form a cell outer membrane mimetic interface in an aqueous environment, endowing excellent properties of resisting protein adsorption, platelet activation and blood cell adhesion. More importantly, the PDA-PMPCC-coated glass surface can suppress thrombus formation for more than 24 h, while the bare glass surface forms obvious thrombus in 6 h tested in the same blood. Furthermore, the fabrication of the PDA-PMPCC coating is simple and material-independent. Therefore, the simple synthesis, facile surface coating and excellent hemocompatibility of the PMPCC make it a promising material for biomimetic surface modification.

Universal Strategy for Efficient Fabrication of Blood Compatible Surfaces via Polydopamine-Assisted Surface-Initiated Activators Regenerated by Electron Transfer Atom-Transfer Radical Polymerization of Zwitterions

Implant and blood-contacting biomaterials are challenged by biofouling and thrombus formation at their interface. Zwitterionic polymer brush coating can achieve excellent hemocompatibility, but the preparation often involves tedious, expensive, and complicated procedures that are designed for specific substrates. Here, we report a facile and universal strategy of creating zwitterionic polymer brushes on variety of materials by polydopamine (PDA)-assisted and surface-initiated activators regenerated by electron transfer atom-transfer radical polymerization (PDA-SI-ARGET-ATRP). A PDA adhesive layer is first dipcoated on a substrate, followed by covalent immobilization of 3-trimethoxysilyl propyl 2-bromo-2-methylpropionate (SiBr, ATRP initiator) on the PDA via condensation. Meanwhile, the trimethoxysilyl group of SiBr also cross-links the PDA oligomers forming stabilized PDA/SiBr complex coating. Finally, SI-ARGET-ATRP is performed in a zwitterionic monomer solution catalyzed by the parts per million level of CuBr₂ without deoxygenization. The conveniently fabricated zwitterionic polymer brush coatings are demonstrated to have stable, ultralow fouling, and extremely blood compatible and functionalizable characteristics. This facile, versatile, and universal surface modification strategy is expected to be widely applicable in various advanced biomaterials and devices.

Endothelialization of cardiovascular devices

Blood-contacting surfaces of cardiovascular devices are not biocompatible for creating an endothelial layer on them. Numerous research studies have mainly sought to modify these surfaces through physical, chemical and biological means to ease early endothelial cell (EC) adhesion, migration and proliferation, and eventually to build an endothelial layer on the surfaces. The first priority for surface modification is inhibition of protein adsorption that leads to inhibition of platelet adhesion to the device surfaces, which may favor EC adhesion. Surface modification through surface texturing, if applicable, can bring some hopeful outcomes in this regard. Surface modifications through chemical and/or biological means may play a significant role in easy endothelialization of cardiovascular devices and inhibit smooth muscle cell proliferation. Cellular engineering of cells relevant to endothelialization can boost the positive outcomes obtained through surface engineering. This review briefly summarizes recent developments and research in early endothelialization of cardiovascular devices. STATEMENT OF SIGNIFICANCE: Endothelialization of cardiovascular implants, including heart valves, vascular stents and vascular grafts is crucial to solve many problems in our health care system. Numerous research efforts have been made to improve endothelialization on the surfaces of cardiovascular implants, mainly through surface modifications in three ways - physically, chemically and biologically. This review is intended to highlight comprehensive research studies to date on surface modifications aiming for early endothelialization on the blood-contacting surfaces of cardiovascular implants. It also discusses future perspectives to help guide endothelialization strategies and inspire further innovations.

Recent Advances and Future Prospects on Adaptive Biomaterials for Antimicrobial Applications

Bacterial infection is becoming the biggest threat to human health. The scenario is partly due to the ineffectiveness of the conventional antibiotic treatments against the emergence of multidrug-resistant bacteria and partly due to the bacteria living in biofilms or cells. Adaptive biomaterials can change their physicochemical properties in the microenvironment of bacterial infection, thereby facilitating either their interactions with bacteria or drug release. The trends in treating bacterial infections using adaptive biomaterials-based systems are flourishing and generate innumerous possibility to design novel antimicrobial therapeutics. This feature article aims to summarize the recent developments in the formulations, mechanisms, and advances of adaptive materials in bacterial infection diagnosis, contact killing of bacteria, and antimicrobial drug delivery. Also, the challenges and limitations of current antimicrobial treatments based on adaptive materials and their clinical and industrial future prospects are discussed.

Self-Assembled Polymeric Membranes and Nanoassemblies on Surfaces: Preparation, Characterization, and Current Applications

Biomembranes play a crucial role in a multitude of biological processes, where high selectivity and efficiency are key points in the reaction course. The outstanding performance of biological membranes is based on the coupling between the membrane and biomolecules, such as membrane proteins. Polymer-based membranes and assemblies represent a great alternative to lipid ones, as their presence not only dramatically increases the mechanical stability of such systems, but also opens the scope to a broad range of chemical functionalities, which can be fine-tuned to selectively combine with a specific biomolecule. Tethering the membranes or nanoassemblies on a solid support opens the way to a class of functional surfaces finding application as sensors, biocomputing systems, molecular recognition, and filtration membranes. Herein, the design, physical assembly, and biomolecule attachment/insertion on/within solid-supported polymeric membranes and nanoassemblies are presented in detail with relevant examples. Furthermore, the models and applications for these materials are highlighted with the recent advances in each field.

Antifouling Lipid Membranes over Protein A for Orientation-Controlled Immunosensing in Undiluted Serum and Plasma

An important advance in biosensor research is the extension and application of laboratory-developed methodologies toward clinical diagnostics, though the propensity toward nonspecific binding of materials in clinically relevant matrices, such as human blood serum and plasma, frequently leads to compromised assays. Several surface chemistries have been developed to minimize nonspecific interactions of proteins and other biological components found within blood and serum samples, though these often exhibit substantially variable outcomes. Herein we report a surface chemistry consisting of a charged-matched supported lipid membrane that has been tailored to form over a gold surface functionalized with protein A. Fine tuning of the interfacial charge of this membrane, along with rational selection of a backfilling self-assembled monolayer, allows for high surface coverage with retention of orientation-controlled capture antibody attachment. We demonstrate using surface-plasmon resonance (SPR) that this highly charged lipid membrane is antifouling, allowing for complete removal of nonspecific human serum and plasma components using only a mild buffer rinse, which we attribute to unique steric interactions with the underlying surface. Furthermore, this surface chemistry is successfully applied for specific detection of IgG and cholera toxin in undiluted human biofluids with negligible sacrifice of SPR signal compared to buffered analysis. This novel lipid membrane interface over protein A may open new avenues for direct biosensing of disease markers within clinical samples.

Folate Ligand Orientation Optimized during Cell Membrane Mimetic Micelle Formation for Enhanced Tumor Cell Targeting

Nanocarriers with strong tumor cell targeting ability have been expected to overcome limitations of cancer chemotherapy. Herein, cell membrane mimetic micelles were prepared from a random copolymer (PMNCF) containing cell membrane phosphorylcholine zwitterion, cholesterol, and tumor cell targeting folic acid (FA) at the side chain ends. Surface orientation of the FA ligand was optimized during PMNCF micelle preparation by controlling solvent solubility for FA. The out-oriented ligands on the micelles were immobilized by the strongly associated hydration layer around the closely packed phosphorylcholine zwitterions. The doxorubicin (DOX) loaded PMNCF micelles were demonstrated to reduce normal cell toxicity to less than 20%. More significantly, HeLa and MCF-7 tumor cell killing efficacy of the optimized formulation was enhanced to 160% compared with that of free DOX. The excellent performances of the drug loaded PMNCF micelles on both tumor cell killing and normal cell toxicity reducing efficacies reveal great potential for developing advanced drug delivery system.

Folate-Conjugated Cell Membrane Mimetic Polymer Micelles for Tumor-Cell-Targeted Delivery of Doxorubicin

Tumor-targeting nano-drug-delivery systems hold great potential to improve the therapeutic efficacy and alleviate the side effects of cancer treatments. Herein, folic acid (FA)-decorated amphiphilic copolymer of FA-P(MPC- co-MaPCL) (MPC: 2-methacryloxoethyl phosphorylcholine, MaPCL: poly(ε-caprolactone) macromonomer) is synthesized and its micelles are fabricated for doxorubicin (DOX) delivery. And non-FA-decorated P(MPC- co-MaPCL) micelles are used as the control. Dynamic light scattering and scanning electron microscopy measurements reveal that FA-P(MPC- co-MaPCL) and P(MPC- co-MaPCL) micelles are spherical with average diameters of 140 and 90 nm, respectively. The evaluation in vitro demonstrates that the blank micelles are nontoxic, while DOX-loaded FA-P(MPC- co-MaPCL) micelles show significant cytotoxicity to HeLa cells and slight cytotoxicity to L929 cells. Moreover, the cellular uptake of DOX-loaded FA-P(MPC- co-MaPCL) micelles in HeLa cells are 4.3-fold and 1.7-fold higher than that of DOX-loaded P(MPC- co-MaPCL) micelles and free DOX after 6 h of incubation, respectively. These results indicate the great potential of this system in anticancer target drug-delivery applications.

A blood cell repelling and tumor cell capturing surface for high-purity enrichment of circulating tumor cells

A red blood cell membrane mimetic surface decorated with FA and RGD ligands can efficiently capture tumor cells with high selectivity.

Surface functionalization of polytetrafluoroethylene substrate with hybrid processes comprising plasma treatment and chemical reactions

Polytetrafluoroethylene (PTFE) exhibits excellent mechanical properties and chemical stability and has been widely used in medical fields for the preparation of implantable medical devices. However, the implantation of PTFE in living systems results in inflammation reactions and infections at the surface thus limits its long-term applications. For PTFE surface modification, we examined the effects of mussel-inspired polydopamine (PDA) coating and the further introduction of functional groups. During PDA coating, the plasma pretreatment on PTFE enhanced the stability of the PDA coating layer. Furthermore, the introduction of functional groups on the PDA layer was carried out using reactive functional groups for the photoinduced graft polymerization of methacrylate. For instance, 2-methacryloyloxyethyl phosphorylcholine (MPC) could be polymerized from the surface of the substrate. These chemical modifications were confirmed step by step using spectroscopes to obtain the hydrophilic surface of the poly(MPC)-modified PTFE. The protein adsorption behaviors on PTFE and poly(MPC)-modified PTFE were compared to understand biocompatibility characteristics of these substrates. The surface of PTFE was immediately covered with albumin and the contact between the substrate and the serum resulted in an increase in the fibrinogen composition with time. On the other hand, fewer proteins were adsorbed on the poly(MPC)-modified PTFE substrate. Thus, this modification procedure would serve as a strategy for safer alterations in PTFE surfaces to expand the life span of the PTFE-carrying medical devices in living systems.

A versatile platform to achieve mechanically robust mussel-inspired antifouling coatings via grafting-to approach

A facile and efficient method to fabricate robust antifouling coatings via a grafting-to approach based on polyvinyl alcohol (PVA)-based biomimetic substrates is reported.

Mussel-Inspired Polyglycerol Coatings with Controlled Wettability: From Superhydrophilic to Superhydrophobic Surface Coatings

Facile approaches to substrate-independent surface coatings with special wettability properties, such as superhydrophobicity, superhydrophilicity, and superamphiphobicity, have been limited. To address this problem, we combined two separate biomimetic concepts of mussel-inspired adhesion and highly hierarchical lotuslike surface structures to develop a universal fabrication method for various superwetting systems on any kind of material. In this feature article, we summarize our work on mussel-inspired polyglycerol (MI-dPG) and its application in the area of superwetting interfacial materials. MI-dPG mimics not only the functional groups of mfp-5 but also their molecular weight and molecular structure, which results in strong and rapid adhesion to the substrate. Furthermore, the MI-dPG coating process provides precise roughness control. The construction of highly hierarchical and superhydrophilic structures was achieved either directly by pH-controlled aggregation or in combination with nanoparticles. Subsequent postmodification of these highly hierarchical structures with different fluorinated or nonfluorinated hydrophobic molecules yielded a surface with superhydrophobic and even superamphiphobic properties.

Quantitative fabrication, performance optimization and comparison of PEG and zwitterionic polymer antifouling coatings

A versatile fabrication and performance optimization strategy of PEG and zwitterionic polymer coatings is developed on the sensor chip of surface plasma resonance (SPR) instrument. A random copolymer bearing phosphorylcholine zwitterion and active ester side chains (PMEN) and carboxylic PEG coatings with comparable thicknesses were deposited on SPR sensor chips via amidation coupling on the precoated polydopamine (PDA) intermediate layer. The PMEN coating showed much stronger resistance to bovine serum albumin (BSA) adsorption than PEG coating at very thin thickness (∼1nm). However, the BSA resistant efficacy of PEG coating could exceed that of PMEN due to stronger steric repelling effect when the thickness increased to 1.5∼3.3nm. Interestingly, both the PEG and PMEN thick coatings (≈3.6nm) showed ultralow fouling by BSA and bovine plasma fibrinogen (Fg). Moreover, changes in the PEG end group from -OH to -COOH, protein adsorption amount could increase by 10-fold. Importantly, the optimized PMEN and PEG-OH coatings were easily duplicated on other substrates due to universal adhesion of the PDA layer, showed excellent resistance to platelet, bacteria and proteins, and no significant difference in the antifouling performances was observed. These detailed results can explain the reported discrepancy in performances between PEG and zwitterionic polymer coatings by thickness. This facile and substrate-independent coating strategy may benefit the design and manufacture of advanced antifouling biomedical devices and long circulating nanocarriers.

STATEMENT OF SIGNIFICANCE

Prevention of biofouling is one of the biggest challenges for all biomedical applications. However, it is very difficult to fabricate a highly hydrophilic antifouling coating on inert materials or large devices. In this study, PEG and zwitterion polymers, the most widely investigated polymers with best antifouling performance, are conveniently immobilized on different kinds of substrates from their aqueous solutions by precoating a polydopamine intermediate layer as the universal adhesive and readily re-modifiable surface. Importantly, the coating fabrication and antifouling performance can be monitored and optimized quantitatively by a surface plasma resonance (SPR) system. More significantly, the SPR on-line optimized coatings were successfully duplicated off-line on other substrates, and supported by their excellent antifouling properties.

Anti-inflammatory and Antibacterial Effects of Covalently Attached Biomembrane-Mimic Polymer Grafts on Gore-Tex Implants

Expanded polytetrafluoroethylene (ePTFE), also known as Gore-Tex, is widely used as an implantable biomaterial in biomedical applications because of its favorable mechanical properties and biochemical inertness. However, infection and inflammation are two major complications with ePTFE implantations, because pathogenic bacteria can inhabit the microsized pores, without clearance by host immune cells, and the limited biocompatibility can induce foreign body reactions. To minimize these complications, we covalently grafted a biomembrane-mimic polymer, poly(2-methacryloyloxylethyl phosphorylcholine) (PMPC), by partial defluorination followed by UV-induced polymerization with cross-linkers on the ePTFE surface. PMPC grafting greatly reduced serum protein adsorption as well as fibroblast adhesion on the ePTFE surface. Moreover, the PMPC-grafted ePTFE surface exhibited a dramatic inhibition of the adhesion and growth of Staphylococcus aureus, a typical pathogenic bacterium in ePTFE implants, in the porous network. On the basis of an analysis of immune cells and inflammation-related factors, i.e., transforming growth factor-β (TGF-β) and myeloperoxidase (MPO), we confirmed that inflammation was efficiently alleviated in tissues around PMPC-grafted ePTFE plates implanted in the backs of rats. Covalent PMPC may be an effective strategy for promoting anti-inflammatory and antibacterial functions in ePTFE implants and to reduce side effects in biomedical applications of ePTFE.

Multifunctional biomaterial coatings: synthetic challenges and biological activity

A controlled interaction of materials with their surrounding biological environment is of great interest in many fields. Multifunctional coatings aim to provide simultaneous modulation of several biological signals. They can consist of various combinations of bioactive, and bioinert components as well as of reporter molecules to improve cell-material contacts, prevent infections or to analyze biochemical events on the surface. However, specific immobilization and particular assembly of various active molecules are challenging. Herein, an overview of multifunctional coatings for biomaterials is given, focusing on synthetic strategies and the biological benefits by displaying several motifs.

Robust mussel-inspired coatings for controlled zinc ion release

Mussel-inspired controlled-release coatings by the combination of the metal-chelation ability of catechol and the hydrolysis of acetal are reported.

Photo-assisted generation of phospholipid polymer substrates for regiospecific protein conjugation and control of cell adhesion

Novel photo-reactive phospholipid polymers were synthesized for use in the preparation of nonfouling surfaces with protein conjugation capacity. Poly[2-methacryloyloxyethyl phosphorylcholine (MPC)-ran-N-methacryloyl-(l)-tyrosinemethylester (MAT)] (P(MPC/MAT)) was synthesized by conventional radical polymerization, with the MAT units capable of being oxidized by 254nm UV irradiation. Because of this photo-oxidation, active species such as catechol and quinone were alternately generated in the copolymer. A silicon wafer was subjected to surface modification through spin coating of P(MPC/MAT) from an aqueous solution for use as a model substrate. The surface was then irradiated several times with UV light. The thickness of the polymer layers formed on the Si wafers was influenced by various parameters such as polymer concentration, UV irradiation time, and composition of the MAT units in P(MPC/MAT). Oxidized MAT units were advantageous not only for polymer adhesion to a solid surface but also for protein conjugation with the adhered polymers. The amount of protein immobilized on UV-irradiated P(MPC/MAT) was dependent on the composition of the MAT units in the polymer. Furthermore, it was confirmed that protein immobilization on the polymer occurred through the oxidized MAT units because the protein adsorption was significantly reduced upon blocking these units through pretreatment with glycine. Conjugation of regiospecific protein could also be achieved through the use of a photomask. In addition, nonspecific protein adsorption was reduced on the non-irradiated regions whose surface was covered with physisorbed P(MPC/MAT). Therefore, P(MPC/MAT) can be used in the preparation of nonfouling substrates, which enable micrometer-sized manipulation of proteins through photo-irradiation. Function of proteins immobilized on MPC copolymers was also confirmed by cell adhesion test. As such, photo-reactive MPC copolymers are suitable for performing controlled protein conjugation and preparing polymer-protein hybrid platforms for use in biomedical and diagnostic devices.

STATEMENT OF SIGNIFICANCE

Novel photo-reactive phospholipid polymers have been synthesized for immobilization on solid surfaces and regiospecific protein conjugation. Tyrosine residues embedded in 2-methacryloyloxyethyl phosphorylcholine (MPC) copolymers could be photo-oxidized, resulting in polymers able to form layers on a solid surface and conjugate with proteins. Moreover, nonspecific biofouling on the surface significantly reduced when the oxidized tyrosine units in the polymer layers were blocked. Upon UV irradiation through a photomask, the UV-exposed tyrosine units were selectively oxidized, forming the only specific regions in which protein conjugation could occur.

Design and mechanisms of antifouling materials for surface plasmon resonance sensors

Surface plasmon resonance (SPR) biosensors have many possible applications, but are limited by sensor chip surface fouling, which blocks immobilization and specific binding by the recognizer elements. Therefore, there is a pressing need for the development of antifouling surfaces. In this paper, the mechanisms of antifouling materials were firstly discussed, including both theories (hydration and steric hindrance) and factors influencing antifouling effects (molecular structures and self-assembled monolayer (SAM) architectures, surface charges, molecular hydrophilicity, and grafting thickness and density). Then, the most recent advances in antifouling materials applied on SPR biosensors were systematically reviewed, together with the grafting strategies, antifouling capacity, as well as their merits and demerits. These materials included, but not limited to, zwitterionic compounds, polyethylene glycol-based, and polysaccharide-based materials. Finally, the prospective research directions in the development of SPR antifouling materials were discussed.

STATEMENT OF SIGNIFICANCE

Surface plasmon resonance (SPR) is a powerful tool in monitoring biomolecular interactions. The principle of SPR biosensors is the conversion of refractive index change caused by molecular binding into resonant spectral shifts. However, the fouling on the surface of SPR gold chips is ubiquitous and troublesome. It limits the application of SPR biosensors by blocking recognition element immobilization and specific binding. Hence, we write this paper to review the antifouling mechanisms and the recent advances of the design of antifouling materials that can improve the accuracy and sensitivity of SPR biosensors. To our knowledge, this is the first review focusing on the antifouling materials that were applied or had potential to be applied on SPR biosensors.

Durable Antibacterial and Nonfouling Cotton Textiles with Enhanced Comfort via Zwitterionic Sulfopropylbetaine Coating

A rapid, environment-friendly, and cost-effective finishing method has been developed for cotton textiles by using zwitterionic NCO-sulfopropylbetaine as the antibacterial finishing agent through covalent bond. The sulfopropylbetaine-finished cotton textile exhibits durable broad-spectrum antibacterial and nonfouling activity, improved mechanical properties, and enhanced comfort.

Anti-phagocytosis and tumor cell targeting micelles prepared from multifunctional cell membrane mimetic polymers

“Stealthy bio-missile” kinds of micelles were fabricated for developing advanced anticancer formulations by cell membrane mimicking.

Self-assembled micelles prepared from amphiphilic copolymers bearing cell outer membrane phosphorylcholine zwitterions for a potential anti-phagocytic clearance carrier

A versatile strategy using amphiphilic copolymers to prepare micelles with cell membrane mimetic phosphorylcholine shell and PCL core showing potential anti-phagocytic clearance properties was reported.

Catechol-Functionalized Synthetic Polymer as a Dental Adhesive to Contaminated Dentin Surface for a Composite Restoration

This study reports a synthetic polymer functionalized with catechol groups as dental adhesives. We hypothesize that a catechol-functionalized polymer functions as a dental adhesive for wet dentin surfaces, potentially eliminating the complications associated with saliva contamination. We prepared a random copolymer containing catechol and methoxyethyl groups in the side chains. The mechanical and adhesive properties of the polymer to dentin surface in the presence of water and salivary components were determined. It was found that the new polymer combined with an Fe(3+) additive improved bond strength of a commercial dental adhesive to artificial saliva contaminated dentin surface as compared to a control sample without the polymer. Histological analysis of the bonding structures showed no leakage pattern, probably due to the formation of Fe-catechol complexes, which reinforce the bonding structures. Cytotoxicity test showed that the polymers did not inhibit human gingival fibroblast cells proliferation. Results from this study suggest a potential to reduce failure of dental restorations due to saliva contamination using catechol-functionalized polymers as dental adhesives.

Antithrombogenic Properties of Amphiphilic Block Copolymer Coatings: Evaluation of Hemocompatibility Using Whole Blood

Antithrombogenicity is one of the most critical properties required for materials used in biomedical devices, particularly in devices that contact blood. The antithrombogenicity of surfaces coated with amphiphilic block copolymers composed of hydrophobic poly(2-methoxyethyl acrylate) (M) and hydrophilic poly(N,N-dimethylacrylamide) (D) segments was investigated using plasma protein and whole blood with regard to protein adsorption, thrombus formation, platelet activation, and clotting kinetics. Three types of block copolymers and a random copolymer were synthesized using one-pot reversible addition-fragmentation chain-transfer (RAFT) polymerization under conditions of high yield and high molecular weight. Triblock and 4-arm block copolymers with MDM and (MD)₄ architecture, respectively, showed good adhesion to both organic and inorganic substrates, including polyvinyl chloride (PVC) tubes, and the resulting coated surfaces showed superior protein repellency and hemocompatibility compared to the diblock or random copolymer coatings and noncoated control. In a Chandler-loop method with whole blood, PVC tubes coated with MDM and (MD)₄ showed improved thromboresistance and adsorption resistance to blood-derived proteins. This high hemocompatibility was also confirmed with human whole blood by thrombelastography (suppression of blood-clotting behavior in both intrinsic and extrinsic coagulation pathways) and platelet function analyses (significant reductions in the aggregation activity of platelets under two types of stimulation). The antithrombogenicity has been discussed based on the structural analyses of the MDM-coated surface. The results of this study will enable the development of more effective biomedical and analytical devices with excellent antithrombogenic characteristics by using a simple and environmentally friendly approach.

Biocompatible and antifouling coating of cell membrane phosphorylcholine and mussel catechol modified multi-arm PEGs

The design and easy fabrication of biocompatible and antifouling coatings on different materials are extremely important for biotechnological and biomedical devices. Here we report a substrate-independent biomimetic modification strategy for fabricating a biocompatible and antifouling ultra-thin coating. Cell membrane antifouling phosphorylcholine (PC) and/or mussel adhesive catechol (c) groups are grafted at the amino-ends of an 8-armed poly(ethylene glycol). The PC groups are introduced by grafting a random copolymer bearing both PC and active ester groups. The modified 8-arm PEGs (PEG-2c-23PC, PEG-6c-23PC and PEG-8c) anchor themselves onto various substrates from aqueous solution and form cell outer membrane mimetic surfaces. Static contact angle, atomic force microscope (AFM) and X-ray photoelectron spectra (XPS) measurements confirm the successful fabrication of coatings on polydopamine (PDA) precoated surfaces. Real-time interaction results between proteins/bacteria and the coatings measured by surface plasmon resonance (SPR) technique suggest excellent anti-protein adsorption and short-term anti-bacteria adhesion performance. The long-term bacteria adhesion, platelet and L929 cell attachment results strongly support the SPR conclusions. Furthermore, the cell membrane mimetic and mussel adhesive protein mimetic PEG-2c-23PC shows hardly any toxicity to L929 fibroblasts, and the coating surface demonstrates the best anti-biofouling performance. This PDA-assisted immobilization of PC and/or catechol modified multi-arm PEGs provides a convenient and universal way to produce a biocompatible and fouling-resistant surface with tailor-made functions, which hopefully can be expanded to a wider range of applications based on both structure and surface superiorities.

Surface modification and endothelialization of biomaterials as potential scaffolds for vascular tissue engineering applications

This review highlights the recent developments of surface modification and endothelialization of biomaterials in vascular tissue engineering applications.

Substrate independent coating formation and anti-biofouling performance improvement of mussel inspired polydopamine

Anti-biofouling performance of mussel inspired polydopamine coating can be improved significantly by simple coordination, oxidation, heating or grafting treatment.

Bioinspired materials: from low to high dimensional structure

The surprising properties of biomaterials are the results of billions of years of evolution. Generally, biomaterials are assembled under mild conditions with very limited supply of constituents available for living organism, and their amazing properties largely result from the sophisticated hierarchical structures. Following the biomimetic principles to prepare manmade materials has drawn great research interests in materials science and engineering. In this review, we summarize the recent progress in fabricating bioinspired materials with the emphasis on mimicking the structure from one to three dimensions. Selected examples are described with a focus on the relationship between the structural characters and the corresponding functions. For one-dimensional materials, spider fibers, polar bear hair, multichannel plant roots and so on have been involved. Natural structure color and color shifting surfaces, and the antifouling, antireflective coatings of biomaterials are chosen as the typical examples of the two-dimensional biomimicking. The outstanding protection performance, and the stimuli responsive and self-healing functions of biomaterials based on the sophisticated hierarchical bulk structures are the emphases of the three-dimensional mimicking. Finally, a summary and outlook are given.

Mussel-inspired hydrophobic coatings for water-repellent textiles and oil removal

A series of catechol derivatives with a different number of linear alkyl chain substituents, and different length, have been shown to polymerize in the presence of aqueous ammonia and air, yielding hydrophobic coatings that present the ability to provide robust and efficient water repellency on weaved textiles, including hydrophilic cotton. The polymerization strategy presented exemplifies an alternative route to established melanin- and polydopamine-like functional coatings, affording designs in which all catechol (adhesive) moieties support specific functional side chains for maximization of the desired (hydrophobic) functionality. The coatings obtained proved effective in the transformation of polyester and cotton weaves, as well as filter paper, into reusable water-repellent, oil-absorbent materials capable of retaining roughly double their weight in model compounds (n-tetradecane and olive oil), as well as of separating water/oil mixtures by simple filtration.