Formulation of Magneto-Responsive Hydrogels from Dually Cross-Linked Polysaccharides: Synthesis, Tuning and Evaluation of Rheological Properties

Smart hydrogels based on natural polymers present an opportunity to fabricate responsive scaffolds that provide an immediate and reversible reaction to a given stimulus. Modulation of mechanical characteristics is especially interesting in myocyte cultivation, and can be achieved by magnetically controlled stiffening. Here, hyaluronan hydrogels with carbonyl iron particles as a magnetic filler are prepared in a low-toxicity process. Desired mechanical behaviour is achieved using a combination of two cross-linking routes—dynamic Schiff base linkages and ionic cross-linking. We found that gelation time is greatly affected by polymer chain conformation. This factor can surpass the influence of the number of reactive sites, shortening gelation from 5 h to 20 min. Ionic cross-linking efficiency increased with the number of carboxyl groups and led to the storage modulus reaching 103 Pa compared to 101 Pa–102 Pa for gels cross-linked with only Schiff bases. Furthermore, the ability of magnetic particles to induce significant stiffening of the hydrogel through the magnetorheological effect is confirmed, as a 103-times higher storage modulus is achieved in an external magnetic field of 842 kA·m−1. Finally, cytotoxicity testing confirms the ability to produce hydrogels that provide over 75% relative cell viability. Therefore, dual cross-linked hyaluronan-based magneto-responsive hydrogels present a potential material for on-demand mechanically tunable scaffolds usable in myocyte cultivation.

Polyelectrolyte-Based Platforms for the Delivery of Peptides and Proteins

The use of peptides and proteins in the pharmaceutical field has increased dramatically over recent years. They have been especially relevant to advances in the treatment of cancer, rheumatoid arthritis, leukemia, and cardiovascular, ophthalmological, metabolic, and infectious diseases. Despite the great potential of peptides and proteins, their use in pharmaceuticals has failed to reach its full potential because of some outstanding challenges. They are unstable under storage conditions and in biological milieus, and their high molecular weight limits permeation through biological membranes. A variety of delivery systems have been investigated to overcome these limitations. Polyelectrolytes (PEs) are molecules that bear multiple negative or positive charges. These molecules play an important role in various platforms relating to the delivery of peptide/protein-based drugs and subunit vaccines. The most commonly utilized PEs include chitosan, alginate, chondroitin sulfate, and poly(γ-glutamic acid). PE-based delivery systems, such as polyelectrolyte complexes (PECs), PE-coated nanocarriers, and PE multilayers, were designed to protect peptides and proteins from degradation and facilitate their absorption. These delivery systems are especially effective when administered orally or intranasally. This review emphasizes the important role of PEs and PE-based delivery vehicles in peptide/protein-based drugs and vaccines.

A versatile salt-based method to immobilize glycosaminoglycans and create growth factor gradients

Glycosaminoglycans (GAGs) are known to play pivotal roles in physiological processes and pathological conditions. To study interactions of GAGs with proteins, immobilization of GAGs is often required. Current methodologies for immobilization involve modification of GAGs and/or surfaces, which can be time-consuming and may involve specialized equipment. Here, we use an efficient and low-cost method to immobilize GAGs without any (chemical) modification using highly concentrated salt solutions. A number of salts from the Hofmeister series were probed for their capacity to immobilize heparin and chondroitin-6-sulfate on microtiter plates applying single chain antibodies against GAGs for detection (ELISA). From all salts tested, the cosmotropic salt ammonium sulfate was most efficient, especially at high concentrations (80–100% (v/v) saturation). Immobilized GAGs were bioavailable as judged by their binding of FGF2 and VEGF, and by their susceptibility towards GAG lyases (heparinase I, II and III, chondroitinase ABC). Using 80% (v/v) saturated ammonium sulfate, block and continuous gradients of heparin were established and a gradient of FGF2 was created using a heparin block gradient as a template. In conclusion, high concentrations of ammonium sulfate are effective for immobilization of GAGs and for the establishment of gradients of both GAGs and GAG-binding molecules, which enables the study to the biological roles of GAGs.

Stimuli-Responsive Multilayers Based on Thiolated Polysaccharides That Affect Fibroblast Cell Adhesion

Control of the biomaterial properties through stimuli-responsive polymeric platforms has become an essential technique in recent biomedical applications. A multilayer system of thiolated chitosan (t-Chi) and thiolated chondroitin sulfate (t-CS), consisting of five double layers ([t-Chi/t-CS]₅), was fabricated here by applying a layer-by-layer coating strategy. To represent a novel class of chemically tunable nanostructures, the ability to cross-link pendant thiol groups was tested by a rise from pH 4 during layer formation to pH 9.3 and a more powerful chemical stimulus by using chloramine-T (ChT). Following both treatments, the resulting multilayers showed stimuli-dependent behavior, as demonstrated by their content of free thiols, wettability, surface charge, elastic modulus, roughness, topography, thickness, and binding of fibronectin. Studies with human dermal fibroblasts further demonstrated the favorable potential of the ChT-responsive multilayers as a cell-adhesive surface compared to pH-induced cross-linking. Because the [t-Chi/t-CS]₅ multilayer system is responsive to stimuli such as the pH and redox environment, multilayer systems with disulfide bond formation may help to tailor their interaction with cells, film degradation, and controlled release of bioactive substances like growth factors in a stimuli-responsive manner useful in future wound healing and tissue engineering applications.

Thiolated Hyaluronic Acid as Versatile Mucoadhesive Polymer: From the Chemistry Behind to Product Developments-What Are the Capabilities?

Within the last decade, intensive research work has been conducted on thiolated hyaluronic acids (HA-SH). By attaching sulfhydryl ligands onto naturally occurring hyaluronic acid various types of HA-SH can be designed. Due the ability of disulfide bond formation within the polymer itself as well as with biological materials, certain properties such as mucoadhesive, gelling, enzyme inhibitory, permeation enhancing and release controlling properties are improved. Besides the application in the field of drug delivery, HA-SH has been investigated as auxiliary material for wound healing. Within this review, the characteristics of novel drug delivery systems based on HA-SH are summarized and the versatility of this polymer for further applications is described by introducing numerous relevant studies in this field.

Glycosaminoglycans from marine sources as therapeutic agents

Glycosaminoglycans (GAGs) in marine animals are different to those of terrestrial organisms, mainly in terms of molecular weight and sulfation. The therapeutic properties of GAGs are related to their ability to interact with proteins, which is very much influenced by sulfation position and patterns. Since currently GAGs cannot be chemically synthesized, they are sourced from natural products, with high intra- but also inter-species variability, in terms of chain length, disaccharide composition and sulfation pattern. Consequently, sulfated GAGs are the most interesting molecules in the marine environment and constitute the focus of the present review. In particular, chondroitin sulfate (CS) appears as the most promising compound. CS-E chains [GlcA-GalNAc(4S,6S)] extracted from squid possess antiviral and anti-metastatic activities and seem to impart signalling properties and improve the mechanical performance of cartilage engineering constructs; Squid CS-E and octopus CS-K [GlcA(3S)-GalNAc(4S)], dermatan sulfate (DS) from sea squirts [-iK units, IdoA(3S)-GalNAc(4S)] and sea urchins [-iE units, IdoA-GalNAc(4S,6S)] and hybrids CS/DS from sharks (-B/iB [GlcA/IdoA(2S)-GalNAc(4S)], -D/iD [GlcA/IdoA(2S)-GalNAc(6S)] and -E/iE units [GlcA/IdoA-GalNAc(4S,6S)]) promote neurite outgrowth and could be valuable materials for nerve regeneration. Also displaying antiviral and anti-metastatic properties, a rare CS with fucosylated branches isolated from sea cucumbers is an anticoagulant and anti-inflammatory agent. In this same line, marine heparin extracted from shrimp and sea squirt has proven anti-inflammatory properties, with the added advantage of decreased risk of bleeding because of its low anticoagulant activity.

Comparative Study of Osteogenic Activity of Multilayers Made of Synthetic and Biogenic Polyelectrolytes

Polyelectrolyte multilayer (PEM) coatings on biomaterials are applied to tailor adhesion, growth, and function of cells on biomedical implants. Here, biogenic and synthetic polyelectrolytes (PEL) are used for layer-by-layer assembly to study the osteogenic activity of PEM with human osteosarcoma MG-63 cells in a comparative manner. Formation of PEM is achieved with biogenic PEL fibrinogen (FBG) and poly-l-lysine (PLL) as well as biotinylated chondroitin sulfate (BCS) and avidin (AVI), while poly(allylamine hydrochloride) (PAH) and polystyrene sulfonate (PSS) represent a fully synthetic PEM used as a reference system here. Surface plasmon resonance measurements show highest layer mass for FBG/PLL and similar for PSS/PAH and BCS/AVI systems, while water contact angle and zeta potential measurements indicate larger differences for PSS/PAH and FBG/PLL but not for BCS/AVI multilayers. All PEM systems support cell adhesion and growth and promote osteogenic differentiation as well. However, FBG/PLL layers are superior regarding MG-63 cell adhesion during short-term culture, while the BCS/AVI system increases alkaline phosphatase activity in long-term culture. Particularly, a multilayer system based on affinity interaction like BCS/AVI may be useful for controlled presentation of biotinylated growth factors to promote growth and differentiation of cells for biomedical applications.

Effect of thiolated glycosaminoglycans on the behavior of breast cancer cells: toward the development of in vitro models of cancer

PURPOSE

The influence of extracellular matrix components like glycosaminoglycans (GAG) or adhesive proteins on the migration of cancer cells and the progression of tumorigenesis remains a challenging task. Therefore, this study aims to give insight into the interaction of cancer cells exhibiting different metastatic potential (MDA-MB-231, MDA-MB-468) with surface immobilized GAG interacting with serum proteins like fibronectin.

METHODS

Model substrata were covalently coated with different thiolated GAG (hyaluronan (HA), chondroitin sulfate (CS), heparin (Hep)) and investigated for the adsorption of fibronectin (FN) with surface plasmon resonance. Then, adhesion of breast cancer cells in the presence of and without serum proteins was studied. Further, the outgrow behavior of confluent cancer cells was examined with the help of cell migration chambers and single-cell migration with time-lapse microscopy.

RESULTS

FN adsorption revealed that the Hep-coated surfaces were able to adsorb significantly more protein than CS and HA. Generally, initial adhesion of breast cancer cells on GAG-coated substrata was inhibited for HA- and CS-coated substrata in the presence of serum proteins for both cell lines in comparison to serum-free conditions. The cell size was also significantly decreased by the influence of serum proteins. The outgrow studies clearly confirmed the different migration speed of both cancer cells while single-cell migration was particularly enhanced on HA-coated surfaces.

CONCLUSIONS

The results reveal that adsorption of serum proteins (e.g. albumin) possess an inhibiting effect on the adhesion of breast cancer cells and that single-cell migration is enhanced for both breast cancer cell lines on HA.

The combined effects of nanotopography and Sr ion for enhanced osteogenic activity of bone marrow mesenchymal stem cells (BMSCs)

Both surface topography and chemistry have a significant influence on the biological performance of orthopedic implant coatings. In our study, a surface modification strategy embodying bioactive trace element incorporation and nanotopography construction was employed to enhance the osteogenic activity of calcium silicate (Ca-Si) coatings. We developed strontium-loaded nanolayer on plasma sprayed Ca-Si (CS) coating via hydrothermal treatment which was denoted as Sr-NT-CS. The original CS coating and the CS coating modified with similar nanotopography (NT-CS) were studied in parallel. We investigated the cellular effects of surface topography and released Sr ion on the adhesion, proliferation, differentiation, and mineralization of BMSCs and the associated molecular mechanisms. The results indicated that the nanotopography activated integrin β1, promoted the spread of BMSCs into a polygonal osteoblastic shape, and induced higher levels of collagen secretion. The Sr incorporation stimulated osteogenic differentiation and mineralization as indicated by the increases in ALP activity and mineralized nodules formation. The examination of gene expressions revealed that Sr ion exerted the effects by interacting with extracellular calcium sensitive receptor (CaSR), and combined with the nanotopographical cue for the up-regulation of osteogenic master transcription factor Runx2. The promoted Runx2 subsequently affected osteoblast (OB) marker genes (BMP-2, BSP, OPN, and OCN), thus driving BMSCs to differentiate into OBs. Moreover, the Sr incorporation inhibited osteoclastogenesis, as indicated by the down-regulation of interleukin-6 (IL-6) and the inhibition of RANKL/RANK system. Those results suggested that our developed Sr-NT-CS coating have combined the effects of nanotopography and Sr ion for enhanced osteogenic activity of BMSCs.

Synthesis of thiolated polysaccharides for formation of polyelectrolyte multilayers with improved cellular adhesion

Intrinsic cross-linking is not only useful for increasing stability, but also for tailoring mechanical properties of polyelectrolyte multilayers (PEM) on implants and tissue engineering scaffolds. Here, a novel route for synthesizing thiolated chitosan (t-Chi) based on the application of 3,3'-dithiodipropionic acid was applied, while thiolated chondroitin sulfate (t-CS) was conjugated by 3,3'-dithiobis (propanoic hydrazide). Both products were subsequently reduced to obtain the free thiols. The thiol content, structural changes and degree of substitution were studied by UV-vis, FTIR, Raman and ¹H NMR spectroscopy, respectively. Chi and CS can be used for PEM formation with the layer-by-layer method, due to the cationic nature of Chi at pH values below 5.0 and the anionic character of CS. Comparative studies on the formation of native Chi/CS versus t-Chi/t-CS PEM with surface plasmon resonance and ellipsometry revealed higher layer mass. We also found that the PEM composed of t-Chi/t-CS had superior cell adhesion properties for human keratinocytes in comparison to the native PEM.

Generating Aptamers Interacting with Polymeric Surfaces for Biofunctionalization

Common strategies for biofunctionalization of surfaces comprise the immobilization of bioactive molecules used as cell-binding ligands for cell recruitment. Besides covalent binding, multivalent noncovalent physical forces between substrate and ligand are an alternative way to equip surfaces with biomacromolecules. In this study, polymer binding ligands are screened by means of a DNA-based in vitro selection process. As candidate biomaterials poly(ether imide) (PEI), polystyrene, and poly[ethylene-co-(vinyl acetate)] are selected, due to their different chemical structure, but similar macroscopic interface properties, allowing physical interaction with nucleotide bases by varying valences. Multivalent interacting aptamers are successfully enriched by SELEX method and an area-wide surface functionalization is achieved, which can be used for further binding of bioactive molecules. In vitro selection against the polymers result in thymine-dominated aptamer binding motifs. The preferential interaction with thymine is attributed to its chemical structure, connected with a decreased electrostatic repulsion of the π-system and the hydrophobic character maximizing entropy. The aptamer binding stability correlates with available valences for interaction, resulting in a more stable functionalization of PEI.