Aliphatic Hyperbranched Copolyesters by Combination of ROP and AB2-Polycondensation

Flexible Polyurethane Foams Modified with Novel Coconut Monoglycerides-Based Polyester Polyols

Coconut oil, a low-molecular-weight vegetable oil, is virtually unutilized as a polyol material for flexible polyurethane foam (FPUF) production due to the high-molecular-weight polyol requirement of FPUFs. The saturated chemistry of coconut oil also limits its compatibility with widely used polyol-forming processes, which mostly rely on the unsaturation of vegetable oil for functionalization. Existing studies have only exploited this resource in producing low-molecular-weight polyols for rigid foam synthesis. In this present work, high-molecular-weight polyester polyols were synthesized from coconut monoglycerides (CMG), a coproduct of fatty acid production from coconut oil, via polycondensation at different mass ratios of CMG with 1:5 glycerol:phthalic anhydride. Characterization of the CMG-based polyol (CMGPOL) products showed number-average molecular weights between 1997 and 4275 g/mol, OH numbers between 77 and 142 mg KOH/g, average functionality between 4.8 and 5.8, acid numbers between 4.49 and 23.56 mg KOH/g, and viscosities between 1.27 and 89.57 Pa·s. The polyols were used to synthesize the CMGPOL-modified PU foams (CPFs) at 20 wt % loading. The modification of the foam formulation increased the monodentate and bidentate urea groups, shown using Fourier transform infrared (FTIR) spectroscopy, that promoted microphase separation in the foam matrix, confirmed using atomic force microscopy (AFM) and differential scanning calorimetry (DSC). The implications of the structural change to foam morphology and open cell content were investigated using a scanning electron microscope (SEM) and gas pycnometer. The density of the CPFs decreased, while a significant improvement in their tensile and compressive properties was observed. Also, the CPFs exhibited different resiliency with a correlation to microphase separation. These findings offer a new sustainable polyol raw material that can be used to modify petroleum-based foam and produce flexible foams with varying properties that can be tailored to meet specific requirements.

Branched Amphiphilic Polylactides as a Polymer Matrix Component for Biodegradable Implants

The combination of biocompatibility, biodegradability, and high mechanical strength has provided a steady growth in interest in the synthesis and application of lactic acid-based polyesters for the creation of implants. On the other hand, the hydrophobicity of polylactide limits the possibilities of its use in biomedical fields. The ring-opening polymerization of L-lactide, catalyzed by tin (II) 2-ethylhexanoate in the presence of 2,2-bis(hydroxymethyl)propionic acid, and an ester of polyethylene glycol monomethyl ester and 2,2-bis(hydroxymethyl)propionic acid accompanied by the introduction of a pool of hydrophilic groups, that reduce the contact angle, were considered. The structures of the synthesized amphiphilic branched pegylated copolylactides were characterized by ¹H NMR spectroscopy and gel permeation chromatography. The resulting amphiphilic copolylactides, with a narrow MWD (1.14-1.22) and molecular weight of 5000-13,000, were used to prepare interpolymer mixtures with PLLA. Already, with the introduction of 10 wt% branched pegylated copolylactides, PLLA-based films had reduced brittleness, hydrophilicity, with a water contact angle of 71.9-88.5°, and increased water absorption. An additional decrease in the water contact angle, of 66.1°, was achieved by filling the mixed polylactide films with 20 wt% hydroxyapatite, which also led to a moderate decrease in strength and ultimate tensile elongation. At the same time, the PLLA modification did not have a significant effect on the melting point and the glass transition temperature; however, the filling with hydroxyapatite increased the thermal stability.

Novozym 435-Catalyzed Synthesis of Well-Defined Hyperbranched Aliphatic Poly(β-thioether ester)

A series of new hyperbranched aliphatic poly(β-thioether ester)s were prepared by the enzymatic ring-opening polycondensation of 1,4-oxathiepan-7-one (OTO) and AB2/ABB' comonomer with acid-labile β-thiopropionate groups. Two kinds of comonomers, methyl 3-((3-hydroxy-2-(hydroxymethyl)propyl)thio)propanoate (HHTP) and methyl 3-((2,3-dihydroxypropyl)thio)propanoate (DHTP), with different primary alcohols and secondary alcohols, were synthesized by thiol-ene click chemistry and thiol-ene Michael addition, respectively. Immobilized lipase B from Candida antarctica (CALB), Novozym 435, was used as the catalyst. The random copolymers were characterized by 1H-NMR, 13C-NMR, GPC, TGA, and DSC. All branched copolyesters had high molecular weights over 15,000 Da with narrow polydispersities in the range of 1.75-2.01 and were amorphous polymers. Their degradation properties under acidic conditions were also studied in vitro. The polymeric nanoparticles of hyperbranched poly(β-thioether ester)s were successfully obtained and showed good oxidation-responsive properties, indicating their potential for biomedical applications.

Functional hyperbranched polymers with advanced optical, electrical and magnetic properties

This review summarizes the recent progress in functional HBPs and their application in optics, electronics and magnetics, including light-emitting devices, aggregation-induced emission materials, nonlinear optical materials, chemosensors, solar cells, magnetic materials, etc., and provides outlooks for further exploration in the field.

Aliphatic polyester polymer stars: synthesis, properties and applications in biomedicine and nanotechnology

A critical review: the ring-opening polymerization of cyclic esters provides access to an array of biodegradable, bioassimilable and renewable polymeric materials. Building these aliphatic polyester polymers into larger macromolecular frameworks provides further control over polymer characteristics and opens up unique applications. Polymer stars, where multiple arms radiate from a single core molecule, have found particular utility in the areas of drug delivery and nanotechnology. A challenge in this field is in understanding the impact of altering synthetic variables on polymer properties. We review the synthesis and characterization of aliphatic polyester polymer stars, focusing on polymers originating from lactide, ε-caprolactone, glycolide, β-butyrolactone and trimethylene carbonate monomers and their copolymers including coverage of polyester miktoarm star copolymers. These macromolecular materials are further categorized by core molecules, catalysts employed, self-assembly and degradation properties and the resulting fields of application (262 references).

Carving Out Niches for Nanostructures: Implementation and Interplay of Building Blocks, Methods, and Tools

The number and diversity of techniques to create well-defined polymeric architectures has set the foundation to reinvent macromolecular chemistry’s tenor. This development offers the chance to build refined structures with multifaceted, cross-disciplinary applications. We discuss a few advances in the design and development of selected nanoobjects with far-reaching potential. Herein, well-defined building blocks and introduced methods to establish three-dimensional architectures will be presented. Sequential attachment strategies and tools taken from biological chemistries achieve new levels of specificity.