Green-Light-Induced Cationic Ring Opening Polymerization Reactions: Perylene-3,4:9,10-bis (Dicarboximide) as Efficient Photosensitizers

Recent Advances and Challenges in Long Wavelength Sensitive Cationic Photoinitiating Systems

With the advantages offered by cationic photopolymerization (CP) such as broad wavelength activation, tolerance to oxygen, low shrinkage and the possibility of "dark cure", it has attracted extensive attention in photoresist, deep curing and other fields in recent years. The applied photoinitiating systems (PIS) play a crucial role as they can affect the speed and type of the polymerization and properties of the materials formed. In the past few decades, much effort has been invested into developing cationic photoinitiating systems (CPISs) that can be activated at long wavelengths and overcome technical problems and challenges faced. In this article, the latest developments in the long wavelength sensitive CPIS under ultraviolet (UV)/visible light-emitting diodes (LED) lights are reviewed. The objective is, furthermore, to show differences as well as parallels between different PIS and future perspectives.

Photoinitiated Cationic Ring-Opening Polymerization of Octamethylcyclotetrasiloxane

Photochemical techniques have recently been revitalized as they can readily be adapted to different polymerization modes to yield a wide range of complex macromolecular structures. However, the implementation of the photoinduced cationic methods in the polymerization of cyclic siloxane monomers has scarcely been investigated. Octamethylcyclotetrasiloxane (D4) is an important monomer for the synthesis of polydimethylsiloxane (PDMS) and its copolymers. In this study, the cationic ring-opening polymerization (ROP) of D4, initiated by diphenyl iodonium hexafluorophosphate (DPI), has been studied. Both direct and indirect initiating systems acting at broad wavelength using benzophenone and pyrene were investigated. In both systems, photochemically generated protonic acids and silylium cations are responsible for the polymerization. The kinetics of the polymerization are followed by viscosimetry and GPC analyses. The reported approach may overcome the problems associated with conventional methods and therefore represents industrial importance for the fabrication of polysiloxanes.

Recent Advances in bis-Chalcone-Based Photoinitiators of Polymerization: From Mechanistic Investigations to Applications

Over the past several decades, photopolymerization has become an active research field, and the ongoing efforts to develop new photoinitiating systems are supported by the different applications in which this polymerization technique is involved-including dentistry, 3D and 4D printing, adhesives, and laser writing. In the search for new structures, bis-chalcones that combine two chalcones' moieties within a unique structure were determined as being promising photosensitizers to initiate both the free-radical polymerization of acrylates and the cationic polymerization of epoxides. In this review, an overview of the different bis-chalcones reported to date is provided. Parallel to the mechanistic investigations aiming at elucidating the polymerization mechanisms, bis-chalcones-based photoinitiating systems were used for different applications, which are detailed in this review.

New Donor-Acceptor Stenhouse Adducts as Visible and Near Infrared Light Polymerization Photoinitiators

Polymerization photoinitiators that can be activated under low light intensity and in the visible range are being pursued by both the academic and industrial communities. To efficiently harvest light and initiate a polymerization process, dyes with high molar extinction coefficients in the visible range are ideal candidates. In this field, Donor-acceptor Stenhouse Adducts (DASA) which belong to a class of recently discovered organic photochromic molecules still lack practical applications. In this work, a series of DASA-based dyes are proposed as photoinitiators for the free radical polymerization of (meth)acrylates upon exposure to a near infrared light (laser diode at 785 nm).

Photoinduced free radical promoted cationic polymerization 40 years after its discovery

Free radical promoted cationic photopolymerization has been described with its historical background, main principles and usage in polymer synthesis.

A high performance phenyl-free LED photoinitiator for cationic or hybrid photopolymerization and its application in LED cationic 3D printing

In this work, a high performance LED photoinitiator, 1,3-bis(1-methyl-1H-pyrrol-2-yl)prop-2-en-1-one (BMO), without a benzene ring was synthesized through a one-step aldehyde–ketone condensation reaction.

Organocatalyzed Controlled Radical Polymerizations

Radical polymerizations are responsible for a significant amount of the World's total polymer production. Free-radical polymerization provides a relatively inexpensive and facile route to produce bulk plastic products, however, it fails in the synthesis of precisely defined macromolecules. To address this issue, controlled radical polymerizations have been developed, which utilize a reversible deactivation mechanism for the synthesis of advanced polymeric architectures. In this chapter, we discuss the mechanisms and applications of organocatalyzed controlled radical polymerizations, specifically atom transfer radical polymerization, photo mediated reversible addition fragmentation chain-transfer polymerization, and reversible complexation mediated radical polymerization, as powerful new methods for precision polymer synthesis.

Multihydroxy-Anthraquinone Derivatives as Free Radical and Cationic Photoinitiators of Various Photopolymerizations under Green LED

Multihydroxy-anthraquinone derivatives [i.e., 1,2,4-trihydroxyanthraquinone (124-THAQ), 1,2,7-trihydroxyanthraquinone (127-THAQ), and 1,2,5,8-tetrahydroxyanthraquinone (1258-THAQ)] can interact with various additives [e.g., iodonium salt, tertiary amine, N-vinylcarbazole, and 2-(4-methoxystyryl)-4,6-bis(trichloromethyl)-1,3,5-triazine] under household green LED irradiation to generate active species (cations and radicals). The relevant photochemical mechanism is investigated using quantum chemistry, fluorescence, cyclic voltammetry, laser flash photolysis, steady state photolysis, and electron spin resonance spin-trapping techniques. Furthermore, the multihydroxy-anthraquinone derivative-based photoinitiating systems are capable of initiating cationic photopolymerization of epoxides or divinyl ethers under green LED, and the relevant photoinitiation ability is consistent with the photochemical reactivity (i.e., 124-THAQ-based photoinitiating system exhibits highest reactivity and photoinitiation ability). More interestingly, multihydroxy-anthraquinone derivative-based photoinitiating systems can initiate free radical crosslinking or controlled (i.e., reversible addition-fragmentation chain transfer) photopolymerization of methacrylates under green LED. It reveals that multihydroxy-anthraquinone derivatives can be used as versatile photoinitiators for various types of photopolymerization reactions.

Organic Electronics: An El Dorado in the Quest of New Photocatalysts for Polymerization Reactions

Photoinitiated polymerization has been the subject of continued research efforts due to the numerous applications in which this polymerization technique is involved (coatings, inks, adhesives, optoelectronic, laser imaging, stereolithography, nanotechnology, etc.). More recently, photopolymerization has received renewed interest due to the emergence of 3D-printing technologies. However, despite current academic and industrial interest in photopolymerization methodologies, a major limitation lies in the slow rates of photopolymerization. The development of new photoinitiating systems aimed at addressing this limitation is an active area of research. Photopolymerization occurs through the exposure of a curable formulation to light, generating radical and/or cationic species to initiate polymerization. At present, photopolymerization is facing numerous challenges related to safety, economic and ecological concerns. Furthermore, practical considerations such as the curing depth and the competition for light absorption between the chromophores and other species in the formulation are key parameters drastically affecting the photopolymerization process. To address these issues, photoinitiating systems operating under low intensity visible light irradiation, in the absence of solvents are highly sought after. In this context, the use of photoredox catalysis can be highly advantageous; that is, photoredox catalysts can provide high reactivities with low catalyst loading, permitting access to high performance photoinitiating systems. However, to act as efficient photoredox catalysts, specific criteria have to be fulfilled. A strong absorption over the visible range, an ability to easily oxidize or reduce as well as sufficient photochemical stability are basic prerequisites to make these molecules desirable candidates for photoredox catalysis. Considering the similarity of requirements between organic electronics and photopolymerization, numerous materials initially designed for applications in organic electronics have been revisited in the context of photopolymerization. Organic electronics is a branch of electronics and materials science focusing on the development of semiconductors devoted to three main research fields; organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs), and organic solar cells (OSCs). The contribution of organic electronics to the field of electronics is important as it paves the way toward cheaper, lighter, and more energy efficient devices. In the present context of photopolymerization, materials that were investigated as photocatalysts were indifferently organic semiconductors used for transistors, charge-transport materials, and light-emitting materials used in electroluminescent devices or conjugated polymers and small molecule dyes for solar cells. In this Account, we summarize our latest developments in elaborating on photocatalytic systems based on these new classes of compounds. Through an in-depth understanding of the parameters governing their reactivities and our efforts to incorporate these materials into photoinitiating systems, we provide new knowledge and a valuable insight for future prospects.

Photoinduced Electron Transfer Reactions for Macromolecular Syntheses

Photochemical reactions, particularly those involving photoinduced electron transfer processes, establish a substantial contribution to the modern synthetic chemistry, and the polymer community has been increasingly interested in exploiting and developing novel photochemical strategies. These reactions are efficiently utilized in almost every aspect of macromolecular architecture synthesis, involving initiation, control of the reaction kinetics and molecular structures, functionalization, and decoration, etc. Merging with polymerization techniques, photochemistry has opened up new intriguing and powerful avenues for macromolecular synthesis. Construction of various polymers with incredibly complex structures and specific control over the chain topology, as well as providing the opportunity to manipulate the reaction course through spatiotemporal control, are one of the unique abilities of such photochemical reactions. This review paper provides a comprehensive account of the fundamentals and applications of photoinduced electron transfer reactions in polymer synthesis. Besides traditional photopolymerization methods, namely free radical and cationic polymerizations, step-growth polymerizations involving electron transfer processes are included. In addition, controlled radical polymerization and "Click Chemistry" methods have significantly evolved over the last few decades allowing access to narrow molecular weight distributions, efficient regulation of the molecular weight and the monomer sequence and incredibly complex architectures, and polymer modifications and surface patterning are covered. Potential applications including synthesis of block and graft copolymers, polymer-metal nanocomposites, various hybrid materials and bioconjugates, and sequence defined polymers through photoinduced electron transfer reactions are also investigated in detail.

Two-cationic 2-methylbenzothiazole derivatives as green light absorbed sensitizers in initiation of free radical polymerization

N-Methylpyridinium esters derivatives of 2-methylbenzothiazole hemicyanine dyes photoinitiators/photosensitizers derived from N-propyl-3-[N-2-methylbenzothiazolo]-4-pyridyno phenylacetic acid ester diiodide and N-propyl-3-[N-2-me]thylbenzothiazolo]-4-pyridino diphenylacetic acid ester diiodide were synthesized and proposed as new photoinitiators of polymerization of 2-ethyl-(2-hydroxymethyl)-1,3-propanediol triacrylate under argon laser exposure at 514 nm. These compounds exhibit a strong absorption around 520 nm. The dye/borate salt, dye/borate salt/N-methoxypyridinium salt, dye/borate salt/diphenyliodonium salt, and dye/borate salt/1,3,5-triazine derivative combinations are very efficient in initiating of radical photopolymerization of triacrylate. Excellent polymerization profiles were obtained. The effect of both sensitizer and co-initiator structure on the ability to initiate of free radical polymerization of photoinitiating systems was also presented. The mechanism was discussed for different multicomponent initiating systems. Graphical AbstractTwo-cationic 2-methylbenzothiazole derivatives as green light absorbed sensitizers in initiation of free radical polymerization.

One/two-photon-sensitive photoacid generators based on benzene oligomer-containing D–π–A-type aryl dialkylsulfonium salts

D–π–A type photoacid generators with a benzene-oligomer as π-conjugated systems show high photoacid generation efficiency (Φ_H+max > 0.7) and good photoinitiated polymerization abilities by 365 nm and 780 nm excitation.

Panchromatic Photopolymerizable Cationic Films Using Indoline and Squaraine Dye Based Photoinitiating Systems

The photoinitiating abilities of indoline and squaraine dyes (D102 and SQ02) incorporated in multicomponent systems for the cationic polymerization of an epoxide or a vinyl ether have been investigated. The polymerizable films exhibit a panchromatic character as revealed by their photosensitivity to a halogen lamp (370-800 nm); household LED bulbs centered at 462 nm (blue), 514 nm (green), 591 nm (yellow), and 630 nm (red); and laser diodes at 457, 473, 532, and 635 nm. SQ02 is particularly efficient in the 520-700 nm range, while D102 exhibits a good efficiency in the 400-580 nm region. The radical photopolymerization of an acrylate can also be observed particularly at 635 nm or upon a halogen lamp. The photochemical mechanisms are studied by steady state photolysis, fluorescence, cyclic voltammetry, electron spin resonance spin trapping, and laser flash photolysis techniques.

Red-light-induced cationic photopolymerization: perylene derivatives as efficient photoinitiators

Nine different perylene derivatives are prepared and their ability to initiate, when combined with an iodonium salt (and optionally N-vinylcarbazole), a ring-opening cationic photopolymerization of epoxides under very soft halogen lamp irradiation is investigated. One of them is particularly efficient under a red laser diode exposure at 635 nm and belongs now to the very few systems available at this wavelength. The photochemical mechanisms are studied by steady-state photolysis, electron spin resonance spin trapping, fluorescence, cyclic voltammetry, and laser flash photolysis techniques.