Thermoresponsive block copolymer-protein conjugates prepared by grafting-from via RAFT polymerization

Galactose Glycopolymer-Grafted Silica Nanoparticles: Synthesis and Binding Studies with Lectin

Weak binding of carbohydrates with protein receptors possesses serious drawbacks in the advancement of therapeutics; however, the development of strategies for multipoint interactions between carbohydrates and protein can overcome these challenges. One such method is developed in this work where glycopolymer-grafted silica nanoparticles with a large number of carbohydrate units are prepared for the interactions with multiple binding sites of the protein. First, a glycomonomer, β-d-galactose-hydroxyethyl methacrylate (β-GEMA), was synthesized in a two-step process by coupling β-d-galactose pentaacetate and hydroxyethyl methacrylate (HEMA), followed by deacetylation for the preparation of poly(β-GEMA) glycopolymers (GPs). Further, the poly(β-GEMA) chains were grafted onto the silica nanoparticle (SiNP) surface by utilizing the "grafting-from" strategy of surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization to prepare p(β-GEMA)-grafted SiNPs (GNPs). Five different chain lengths ranging from 10 to 40 kDa of the GPs and the GNPs were prepared, and various characterization techniques confirmed the formation of GPs and grafting of the GPs on the SiNP surface. The particle size of GNPs and the number of GPs grafted on the SiNP surface showed a strong dependence on the chain length of the GPs. Further, the GNPs were subjected to a binding study with β-galactose-specific protein peanut agglutinin (PNA). A much stronger binding in the case of GNPs was observed with an association constant ∼320 times and ∼53 times than that of the monomeric methyl-β-d-galactopyranoside and the GPs, respectively. Additionally, the binding of the PNA with GNPs and GPs was also studied with varying chain lengths to understand the effects of the chain length on the binding affinity. A clear increase in binding constants was observed in the case of GNPs with increasing chain length of grafted GPs, attributed to the enhanced enthalpic and entropic contributions. This work holds its uniqueness in these improved interactions between carbohydrates and proteins, which can be used for carbohydrate-based targeted therapeutics.

Integrating Enzymes with Supramolecular Polymers for Recyclable Photobiocatalytic Catalysis

Chemical modifications of enzymes excel in the realm of enzyme engineering due to its directness, robustness, and efficiency; however, challenges persist in devising versatile and effective strategies. In this study, we introduce a supramolecular modification methodology that amalgamates a supramolecular polymer with Candida antarctica lipase B (CalB) to create supramolecular enzymes (SupEnzyme). This approach features the straightforward preparation of a supramolecular amphiphilic polymer (β-CD@SMA), which was subsequently conjugated to the enzyme, resulting in a SupEnzyme capable of self-assembly into supramolecular nanoparticles. The resulting SupEnzyme nanoparticles can form micron-scale supramolecular aggregates through supramolecular and electrostatic interactions with guest entities, thus enhancing catalyst recycling. Remarkably, these aggregates maintain 80 % activity after seven cycles, outperforming Novozym 435. Additionally, they can effectively initiate photobiocatalytic cascade reactions using guest photocatalysts. As a consequence, our SupEnzyme methodology exhibits noteworthy adaptability in enzyme modification, presenting a versatile platform for various polymer, enzyme, and biocompatible catalyst pairings, with potential applications in the fields of chemistry and biology.

Design and Application of Hybrid Polymer-Protein Systems in Cancer Therapy

Polymer-protein systems have excellent characteristics, such as non-toxic, non-irritating, good water solubility and biocompatibility, which makes them very appealing as cancer therapeutics agents. Inspiringly, they can achieve sustained release and targeted delivery of drugs, greatly improving the effect of cancer therapy and reducing side effects. However, many challenges, such as reducing the toxicity of materials, protecting the activities of proteins and controlling the release of proteins, still need to be overcome. In this review, the design of hybrid polymer-protein systems, including the selection of polymers and the bonding forms of polymer-protein systems, is presented. Meanwhile, vital considerations, including reaction conditions and the release of proteins in the design process, are addressed. Then, hybrid polymer-protein systems developed in the past decades for cancer therapy, including targeted therapy, gene therapy, phototherapy, immunotherapy and vaccine therapy, are summarized. Furthermore, challenges for the hybrid polymer-protein systems in cancer therapy are exemplified, and the perspectives of the field are covered.

Novel ABA block copolymers: preparation, temperature sensitivity, and drug release

A new PEGylated macroiniferter was prepared based on the polycondensation reaction of polyethylene oxide (PEO), methylene diphenyl diisocyanate (MDI), and 1,1,2,2-tetraphenyl-1,2-ethanediol (TPED). The macroiniferter consists of PEO end groups and readily reacts with acrylamides (such as N-isopropylacrylamide, NIPAM) and forms ABA block copolymers (PEO-PNIPAM-PEO). This approach of making amphiphilic ABA block copolymers is robust, versatile, and useful, particularly for the development of polymers for biomedical applications. The resulting amphiphilic PEO-PNIPAM-PEO block copolymers are also temperature sensitive, and their phase transition temperatures are close to human body temperature and therefore they have been applied as drug carriers for cancer treatment. Two PEO-PNIPAM-PEO polymers with different molecular weights were prepared and selected to make temperature-sensitive micelles. As a result of the biocompatibility of these micelles, cell viability tests proved that these micelles have low toxicity toward cancer cells. The resultant polymer micelles were then used as drug carriers to deliver the hydrophobic anticancer drug doxorubicin (DOX), and the results showed that they exhibit significantly higher cumulative drug release efficiency at higher temperatures. Moreover, after loading DOX into the micelles, cellular uptake experiments showed easy uptake and cell viability tests showed that DOX-loaded micelles possess a better therapeutic effect than free DOX at the same dose.

Rapid Oxygen-Tolerant Synthesis of Protein-Polymer Bioconjugates via Aqueous Copper-Mediated Polymerization

The synthesis of protein-polymer conjugates usually requires extensive and costly deoxygenation procedures, thus limiting their availability and potential applications. In this work, we report the ultrafast synthesis of polymer-protein bioconjugates in the absence of any external deoxygenation via an aqueous copper-mediated methodology. Within 10 min and in the absence of any external stimulus such as light (which may limit the monomer scope and/or disrupt the secondary structure of the protein), a range of hydrophobic and hydrophilic monomers could be successfully grafted from a BSA macroinitiator, yielding well-defined polymer-protein bioconjugates at quantitative yields. Our approach is compatible with a wide range of monomer classes such as (meth) acrylates, styrene, and acrylamides as well as multiple macroinitiators including BSA, BSA nanoparticles, and beta-galactosidase from Aspergillus oryzae. Notably, the synthesis of challenging protein-polymer-polymer triblock copolymers was also demonstrated, thus significantly expanding the scope of our strategy. Importantly, both lower and higher scale polymerizations (from 0.2 to 35 mL) were possible without compromising the overall efficiency and the final yields. This simple methodology paves the way for a plethora of applications in aqueous solutions without the need of external stimuli or tedious deoxygenation.

Role of protein-copolymer assembly in controlling micellization process of amphiphilic triblock copolymer

HYPOTHESIS

Triblock copolymer poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (PEG-PPG-PEG) forms a well-known micellar assembly at a particular temperature. Apart from regular assembly within the copolymer, it is crucial to explore additional assembly behaviour via simple exposure of proteins which unveils biased interactions with blocks of copolymer. The current work focuses on the examination of Pluronic F108 i.e. PEG-PPG-PEG with two different proteins i.e. α-chymotrypsin (CT) and lysozyme (LSZ), aiming at probing the critical micellization temperature (CMT) and molecular level interactions.

EXPERIMENTS

Potential role of protein-copolymer assembly formation at a particular concentration of protein in modulating CMT was shown by a systematic experimental approach combined with a series of physicochemical methods. The sophisticated multiple techniques include fluorescence spectroscopy, Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, dynamic light scattering (DLS), zeta potential measurements, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Furthermore, molecular docking studies were also employed to correlate theoretical insights with experimental findings.

FINDINGS

CT and LSZ decrease CMT in regular concentration-dependent manner except for particular concentration (1.5 mg/mL) of LSZ which shows anomalous behaviour in steady-state fluorescence spectroscopy, temperature dependent fluorescence spectroscopy, Raman spectroscopy and DLS measurements. SEM and TEM results clearly reveal protein-copolymer assembly formation. The assembled structure has different biophysical properties. Docking studies elucidate several bio macromolecular interactions which can be involved in assembly formation. Based on obtained results from biophysical techniques mechanism of CMT variation was deduced. Obtained results can be useful in biosensors and targeted drug delivery systems.

A comprehensive analysis in one run - in-depth conformation studies of protein-polymer chimeras by asymmetrical flow field-flow fractionation

Polymer-based protein engineering has enabled the synthesis of a variety of protein-polymer conjugates that are widely applicable in therapeutic, diagnostic and biotechnological industries. Accurate characterizations of physical-chemical properties, in particular, molar masses, sizes, composition and their dispersities are critical parameters that determine the functionality and conformation of protein-polymer conjugates and are important for creating reproducible manufacturing processes. Most of the current characterization techniques suffer from fundamental limitations and do not provide an accurate understanding of a sample's true nature. In this paper, we demonstrate the advantage of asymmetrical flow field-flow fractionation (AF4) coupled with multiple detectors for the characterization of a library of complex, zwitterionic and neutral protein-polymer conjugates. This method allows for determination of intrinsic physical properties of protein-polymer chimeras from a single, rapid measurement.

Oxygen tolerant, photoinduced controlled radical polymerization approach for the synthesis of giant amphiphiles

New families of amphiphilic protein–polymer bioconjugates readily synthesized via an oxygen tolerant, photoinduced RDRP approach.

Enlightening advances in polymer bioconjugate chemistry: light-based techniques for grafting to and from biomacromolecules

Photochemistry has revolutionized the field of polymer-biomacromolecule conjugation. Ligation reactions necessitate biologically benign conditions, and photons have a significant energy advantage over what is available thermally at ambient temperature, allowing for rapid and unique reactivity. Photochemical reactions also afford many degrees of control, specifically, spatio-temporal control, light source tunability, and increased oxygen tolerance. Light-initiated polymerizations, in particular photo-atom-transfer radical polymerization (photo-ATRP) and photoinduced electron/energy transfer reversible addition-fragmentation chain transfer polymerization (PET-RAFT), have been used for grafting from proteins, DNA, and cells. Additionally, the spatio-temporal control inherent to light-mediated chemistry has been utilized for grafting biomolecules to hydrogel networks for many applications, such as 3-D cell culture. While photopolymerization has clear advantages, there are factors that require careful consideration in order to obtain optimal control. These factors include the photocatalyst system, light intensity, and wavelength. This Perspective aims to discuss recent advances of photochemistry for polymer biomacromolecule conjugation and potential considerations while tailoring these systems.

Nanosized Delivery Systems for Therapeutic Proteins: Clinically Validated Technologies and Advanced Development Strategies

The impact of protein therapeutics in healthcare is steadily increasing, due to advancements in the field of biotechnology and a deeper understanding of several pathologies. However, their safety and efficacy are often limited by instability, short half-life and immunogenicity. Nanodelivery systems are currently being investigated for overcoming these limitations and include covalent attachment of biocompatible polymers (PEG and other synthetic or naturally derived macromolecules) as well as protein nanoencapsulation in colloidal systems (liposomes and other lipid or polymeric nanocarriers). Such strategies have the potential to develop next-generation protein therapeutics. Herein, we review recent research progresses on these nanodelivery approaches, as well as future directions and challenges.

Preparation of Biomolecule-Polymer Conjugates by Grafting-From Using ATRP, RAFT, or ROMP

Biomolecule-polymer conjugates are constructs that take advantage of the functional or otherwise beneficial traits inherent to biomolecules and combine them with synthetic polymers possessing specially tailored properties. The rapid development of novel biomolecule-polymer conjugates based on proteins, peptides, or nucleic acids has ushered in a variety of unique materials, which exhibit functional attributes including thermo-responsiveness, exceptional stability, and specialized specificity. Key to the synthesis of new biomolecule-polymer hybrids is the use of controlled polymerization techniques coupled with either grafting-from, grafting-to, or grafting-through methodology, each of which exhibit distinct advantages and/or disadvantages. In this review, we present recent progress in the development of biomolecule-polymer conjugates with a focus on works that have detailed the use of grafting-from methods employing ATRP, RAFT, or ROMP.

Thermoresponsive Poly(ß-hydroxyl amine)s: Synthesis of a New Stimuli Responsive Amphiphilic Homopolymer Family through Amine-Epoxy 'Click' Polymerization

A new synthesis of amphiphilic homopolymers is described. In this synthesis, commercially available and inexpensive primary amines and di-epoxide molecules are utilized as AA- and BB-types of monomers in an amine-epoxy ‘click’ polymerization process. This process can be carried out in water and at room temperature. It does not require a catalyst or inert conditions and forms no byproducts. Therefore, the polymer synthesis can be carried out in open-air and bench-top conditions and a post-synthesis purification step is not required. The modularity of the synthesis, on the other hand, allows for facile structural modulation and tuning of the thermally triggered aggregation process in the temperature range of 7 to 91 °C. Finally, the underlying principles can be translated from linear architectures to polymer networks (hydrogels).

Metal Free Reversible-Deactivation Radical Polymerizations: Advances, Challenges, and Opportunities

A considerable amount of the worldwide industrial production of synthetic polymers is currently based on radical polymerization methods. The steadily increasing demand on high performance plastics and tailored polymers which serve specialized applications is driven by the development of new techniques to enable control of polymerization reactions on a molecular level. Contrary to conventional radical polymerization, reversible-deactivation radical polymerization (RDRP) techniques provide the possibility to prepare polymers with well-defined structures and functionalities. The review provides a comprehensive summary over the development of the three most important RDRP methods, which are nitroxide mediated radical polymerization, atom transfer radical polymerization and reversible addition fragmentation chain transfer polymerization. The focus thereby is set on the newest developments in transition metal free systems, which allow using these techniques for biological or biomedical applications. After each section selected examples from materials synthesis and application to biomedical materials are summarized.

Grafting-From Proteins Using Metal-Free PET-RAFT Polymerizations under Mild Visible-Light Irradiation

We report a new strategy toward polymer-protein conjugates using a grafting-from method that employs photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. Initial screening of reaction conditions showed rapid polymerization of acrylamides under high dilution in water using eosin Y as a photocatalyst in the presence of a tertiary amine. A lysozyme-modified chain transfer agent allowed the same conditions to be utilized for grafting-from polymerizations, and we further demonstrated the broad scope of this technique by polymerizing acrylic and styrenic monomers. Finally, retention of the RAFT end group was suggested by successful chain extension with N-isopropylacrylamide from the polymer-protein conjugates to form block copolymer-protein conjugates. This strategy should expand the capabilities of grafting-from proteins with RAFT polymerization under mild conditions to afford diverse functional materials.

Grafting challenging monomers from proteins using aqueous ICAR ATRP under bio-relevant conditions

Aqueous ICAR ATRP was applied to graft well defined acrylamide, N,N-dimethylacrylamide and N-vinylimidazole homo and block copolymers from a model protein initiator (bovine serum albumin (BSA)) under bio-relevant conditions.

RAFT/MADIX polymerization of N-vinylcaprolactam in water–ethanol solvent mixtures

The present paper demonstrates the successful RAFT/MADIX polymerization of N-vinylcaprolactam at ambient temperature in water–ethanol mixtures. An optimum was found for a 1 : 1 ratio of water and ethanol as solvent regarding both polymerization rate and insignificant hydrolysis.

Grafting PNIPAAm from β-barrel shaped transmembrane nanopores

The research on protein-polymer conjugates by grafting from the surface of proteins has gained significant interest in the last decade. While there are many studies with globular proteins, membrane proteins have remained untouched to the best of our knowledge. In this study, we established the conjugate formation with a class of transmembrane proteins and grow polymer chains from the ferric hydroxamate uptake protein component A (FhuA; a β-barrel transmembrane protein of Escherichia coli). As the lysine residues of naturally occurring FhuA are distributed over the whole protein, FhuA was reengineered to have up to 11 lysines, distributed symmetrically in a rim on the membrane exposed side (outside) of the protein channel and exclusively above the hydrophobic region. Reengineering of FhuA ensures a polymer growth only on the outside of the β-barrel and prevents blockage of the channel as a result of the polymerization. A water-soluble initiator for controlled radical polymerization (CRP) was consecutively linked to the lysine residues of FhuA and N-isopropylacrylamide (NIPAAm) polymerized under copper-mediated CRP conditions. The conjugate formation was analyzed by using MALDI-ToF mass spectrometry, SDS-PAGE, circular dichroism spectroscopy, analytical ultracentrifugation, dynamic light scattering, transmission electron microscopy and size exclusion chromatography. Such conjugates combine the specific functions of the transmembrane proteins, like maintaining membrane potential gradients or translocation of substrates with the unique properties of synthetic polymers such as temperature and pH stimuli handles. FhuA-PNIPAAm conjugates will serve as functional nanosized building blocks for applications in targeted drug delivery, self-assembly systems, functional membranes and transmembrane protein gated nanoreactors.

Enzyme-Triggered Antifouling Coatings: Switching Bioconjugate Adsorption via Proteolytically Cleavable Interfering Domains

Protease activable antifouling coatings based on peptide-poly(ethylene glycol) conjugates are shown. The material-specific adsorption of a bioconjugate is temporarily suppressed by extending a titanium binding sequence with a proteolytically cleavable epitope and a suitable interfering domain. The adsorption of the PEG-peptide conjugates onto titanium substrates can be regained by cleaving the interfering domain with Tobacco Etch Virus protease. This activates peptide-mediated PEGylation of titanium surfaces and results in coatings that are stable against dilution and suppress nonreversible adsorption of blood protein models. Effects of branched and linear peptidic binding domains on coating stability and antifouling properties are elucidated.

Live RB51 vaccine lyophilized hydrogel formulations with increased shelf life for practical ballistic delivery

Ballistic delivery capability is essential to delivering vaccines and other therapeutics effectively to both livestock and wildlife in many global scenarios. Here, lyophilized poly(ethylene glycol) (PEG)-glycolide dimethacrylate crosslinked but degradable hydrogels were assessed as payload vehicles to protect and deliver a viable bacterial vaccine, Brucella abortus strain RB51 (RB51), ballistically using commercial thermoplastic cellulosic degradable biobullets. Degradable PEG hydrogel rods loaded with ∼10(10) live RB51 bacteria (CFUs) were fabricated using three different polymerization methods, cut into fixed-sized payload segments, and lyophilized. Resulting dense, glassy RB51 vaccine-loaded monoliths were inserted into thermoplastic biobullet 100-μL payload chambers. Viability studies of lyophilized formulations assessed as a function of time and storage temperature supported the abilities of several conditions to produce acceptable vaccine shelf-lives. Fired from specifically designed air rifles, gel-loaded biobullets exhibit down-range ballistic properties (i.e., kinetic energy, trajectory, accuracy) similar to unloaded biobullets. Delivered to bovine tissue, these hydrogels rehydrate rapidly by swelling in tissue fluids, with complete hydration observed after 5h in serum. Live RB51 vaccine exhibited excellent viability following carrier polymerization, lyophilization, and storage, at levels sufficient for vaccine dosing to wild range bison, the intended target. These data validate lyophilized degradable PEG hydrogel rods as useful drug carriers for remote delivery of both live vaccines and other therapeutics to livestock, wildlife, or other free-range targets using ballistic technologies.

Protein ROMP: Aqueous Graft-from Ring-Opening Metathesis Polymerization

Ring-opening metathesis polymerization (ROMP) was carried out from the surface of a protein under aqueous conditions. Grubbs' third generation catalyst was modified with PEGylated pyridyl groups to form a water-soluble species that showed high activity in aqueous buffered solutions at near-neutral pH. The modification of a protein with this catalyst to create a stable macroinitiator for ROMP is described. The protein macroinitiator was then used to polymerize water-soluble norbornenes, resulting in high molecular weight protein/polymer conjugates. Varying polymerization time and monomer concentration demonstrated the kinetics of molecular weight evolution and macroinitiator conversion of graft-from ROMP.

Smart hybrid materials by conjugation of responsive polymers to biomacromolecules

The chemical structure and function of biomacromolecules has evolved to fill many essential roles in biological systems. More specifically, proteins, peptides, nucleic acids and polysaccharides serve as vital structural components, and mediate chemical transformations and energy/information storage processes required to sustain life. In many cases, the properties and applications of biological macromolecules can be further expanded by attaching synthetic macromolecules. The modification of biomacromolecules by attaching a polymer that changes its properties in response to environmental variations, thus affecting the properties of the biomacromolecule, has led to the emergence of a new family of polymeric biomaterials. Here, we summarize techniques for conjugating responsive polymers to biomacromolecules and highlight applications of these bioconjugates reported so far. In doing so, we aim to show how advances in synthetic tools could lead to rapid expansion in the variety and uses of responsive bioconjugates.

Synthesis and Application of Protein-Containing Block Copolymers

Proteins possess an impressive array of functionality ranging from catalytic activity to selective binding and mechanical strength, making them highly attractive for materials engineering. Conjugation of synthetic polymers to proteins has the potential to improve the physical properties of the protein as well as provide functionality not typically found in native proteins, such as stimuli-responsive behavior and the programmable ability to self-assemble. This viewpoint discusses the design of protein-polymer conjugates, an important class of block copolymers. Use of these hybrid molecules in biological and catalytic applications is highlighted, and the ability of the polymer to direct the solution and solid-state self-assembly of the hybrid block copolymers is reviewed. Future challenges in polymer and material science that will enable these hybrid molecules to reach their potential as protein-based materials are outlined.

Surface-initiated controlled radical polymerizations from silica nanoparticles, gold nanocrystals, and bionanoparticles

This review summarizes recent progress in surface-initiated controlled radical polymerizations from silica nanoparticles, gold nanocrystals, and bionanoparticles.

Polymer-protein conjugation via a ‘grafting to’ approach – a comparative study of the performance of protein-reactive RAFT chain transfer agents

The performances of various protein-reactive RAFT CTAs to afford polymer-protein conjugation via a grafting-to approach were compared.

Labelling Polymers and Micellar Nanoparticles via Initiation, Propagation and Termination with ROMP

In this paper we compare and contrast three approaches for labelling polymers with functional groups via ring-opening metathesis polymerization (ROMP). We explored the incorporation of functionality via initiation, termination and propagation employing an array of novel initiators, termination agents and monomers. The goal was to allow the generation of selectively labelled and well-defined polymers that would in turn lead to the formation of labelled nanomaterials. Norbornene analogues, prepared as functionalized monomers for ROMP, included fluorescent dyes (rhodamine, fluorescein, EDANS, and coumarin), quenchers (DABCYL), conjugatable moieties (NHS esters, pentafluorophenyl esters), and protected amines. In addition, a set of symmetrical olefins for terminally labelling polymers, and for the generation of initiators in situ is described.

Visible light induced fast synthesis of protein–polymer conjugates: controllable polymerization and protein activity

Visible light induced fast and controllable RAFT polymerization from protein as a novel method for preparing protein–polymer conjugates at ambient temperature.

Dual-temperature and pH responsive (ethylene glycol)-based nanogels via structural design

Dual-temperature and pH responsive (ethylene glycol)-based nanogels were synthesized. Both the core and the shell of the nanogels showed a lower critical solution temperature (LCST) and the LCST of the shell was strongly affected by the solution pH and salt concentration due to the presence of carboxylic acid groups at the nanogel surface.