CO2Responsive Imidazolium-Type Poly(Ionic Liquid) Gels

Controlling Ionic Conductivity in Organometallic Ionic Liquids through Light-Induced Coordination Polymer Formation and Thermal Reversion

Owing to their high ionic conductivity and negligible vapor pressure, ionic liquids (ILs) find applications in various electronic devices. However, fabricating IL-based photocontrollable devices remains a challenge. In this study, we developed organometallic ILs with reversible light- and heat-controlled ionic conductivities for potential use in tunable devices. The physical properties and stimulus responses of ILs containing a cationic sandwich Ru complex with two coordinating substituents were investigated. UV photoirradiation of these ILs triggered cation photodissociation, resulting in their transformation into viscoelastic coordination polymers wherein the coordinating substituents bridged the Ru centers. Owing to the anion coordination, salts with coordinating anions such as CF3SO2NCN-, B(CN)4-, and BF2(CN)2- exhibited faster response and higher conversion than those with noncoordinating anions including (FSO2)2N- and (CF3SO2)2N-. All photoproducts reverted to their original ILs upon heating, except for the photoproduct of the BF2(CN)2 salt, which decomposed upon heating. Light- and heat-induced reversible changes occur in most cases between the high-ionic-conductive IL state and low-ionic-conductive coordination polymer state. Unlike previously reported ILs with three or one cation substituent, the current ILs exhibited both high reactivity and large ionic conductivity changes.

High-Toughness CO2-Sourced Ionic Polyurea Adhesives

Polyurea (PUa) adhesives are renowned for their exceptional adhesion to diverse substrates even in harsh environments. However, the presence of quadruple bidentate intermolecular hydrogen bonds in the polymer chains creates a trade-off between cohesive energy and interfacial adhesive energy. To overcome this challenge, a series of CO2-sourced ionic PUa adhesives with ultratough adhesion to various substrates are developed. The incorporated ionic segments within the adhesive serve to partially mitigate the intermolecular hydrogen bonding interactions while conferring unique electrostatic interactions, leading to both high cohesive energy and interfacial adhesive energy. The maximum adhesive strength of 10.9 MPa can be attained by ionizing the CO2-sourced PUa using bromopropane and subsequently exchanging the anion with lithium bis(trifluoromethylsulfonyl)imide. Additionally, these ionic PUa adhesives demonstrate several desirable properties such as low-temperature stability (-80 °C), resistance to organic solvents and water, high flame retardancy, antibacterial activity, and UV-fluorescence, thereby expanding their potential applications. This study presents a general and effective approach for designing high-strength adhesives suitable for a wide array of uses.

Fabrication of Gelatin-Derived Gel Electrolyte Using Deep Eutectic Solvents through In Situ Derivatization and Crosslinking Strategy for Supercapacitors and Flexible Sensors

The facile fabrication of gel polymer electrolytes is crucial to the development of flexible electronics, and the use of natural polymers as sources has obtained great attention due to their abundant, low-cost, biodegradable, easy modification, and biocompatible features. In this article, a facile fabrication protocol to engineer gelatin into gel electrolytes was developed by taking the advantages of both deep eutectic solvent (DES) (including its good solubility to gelatin and satisfactory electrochemical properties) and rich active functional groups of gelatin, through in situ derivatization and crosslinking strategy. A double-crosslinked DES gel electrolyte was prepared with the dissolution of gelatin in choline chloride and alcohol-based DES and a further crosslinking with Fe3+ ions. The obtained DES gel presented outstanding mechanical properties, excellent ionic conductivity (up to 101-102 mS/cm), a wide operating temperature range (-40 to 80 °C), satisfactory self-healing property, and good degradability. Moreover, the obtained DES gel electrolyte was successfully applied to supercapacitors and flexible sensors, showing excellent electrochemical performance and strain-response properties. In a word, our study provides a facile protocol to engineer gelatin into gel electrolytes by using deep eutectic solvent, showing significant insights into the design and preparation of sustainable gel polymer electrolytes and having great application potential in next-generation high-performance flexible electronics.

CO2-responsive gels

CO₂-responsive materials undergo a change in chemical or physical properties in response to the introduction or removal of CO₂. The use of CO₂ as a stimulus is advantageous as it is abundant, benign, inexpensive, and it does not accumulate in a system. Many CO₂-responsive materials have already been explored including polymers, latexes, surfactants, and catalysts. As a sub-set of CO₂-responsive polymers, the study of CO₂-responsive gels (insoluble, cross-linked polymers) is a unique discipline due to the unique set of changes in the gels brought about by CO₂ such as swelling or a transformed morphology. In the past 15 years, CO₂-responsive gels and self-assembled gels have been investigated for a variety of emerging potential applications, reported in 90 peer-reviewed publications. The two most widely exploited properties include the control of flow (fluids) via CO₂-triggered aggregation and their capacity for reversible CO₂ absorption-desorption, leading to applications in Enhanced Oil Recovery (EOR) and CO₂ sequestration, respectively. In this paper, we review the preparation, properties, and applications of these CO₂-responsive gels, broadly classified by particle size as nanogels, microgels, aerogels, and macrogels. We have included a section on CO₂-induced self-assembled gels (including poly(ionic liquid) gels).

Recent advances in poly(ionic liquid)s for biomedical application

Poly(ionic liquid)s (PILs) are polymers containing ions in their side-chain or backbone, and the designability and outstanding physicochemical properties of PILs have attracted widespread attention from researchers. PILs have specific characteristics, including negligible vapor pressure, high thermal and chemical stability, non-flammability, and self-assembly capabilities. PILs can be well combined with advanced analytical instruments and technology and have made outstanding contributions to the development of biomedicine aiding in the continuous advancement of science and technology. Here we reviewed the advances of PILs in the biomedical field in the past five years with a focus on applications in proteomics, drug delivery, and development. This paper aims to engage pharmaceutical and biomedical scientists to full understand PILs and accelerate the progress from laboratory research to industrialization.

Hybrid Sol-Gel Matrices Doped with Colorimetric/Fluorimetric Imidazole Derivatives

Organic-inorganic hybrids (OIH) are materials that can be easily synthesized by the sol-gel method and combine the advantages of organic and inorganic moieties within a single polymeric matrix. Imidazole derivatives are versatile organic compounds that can change their optical properties with the variation of pH due to the protonation or deprotonation of the nitrogen atoms. This work reports the preparation of different OIHs doped with different contents of two imidazole compounds (3a,b). The obtained materials were characterized structurally by FTIR, and the dielectric properties were studied by electrochemical impedance spectroscopy. The optical properties were studied by UV-Vis absorption and fluorescence spectroscopies. The FTIR analysis showed that the presence of the imidazole does not change the structural properties of the matrices. The normalized resistance values obtained for the doped matrices ranged between 8.57 and 9.32 Ω cm2, all being higher than the undoped matrix. The σ ranged between 9.49 and 10.28 S cm-1, being all higher than the pure OIH samples. Compound 3a showed a maximum absorption peak at 390 nm, which is present in the OIH spectra, proving the presence of the compound. In the case of compound 3b, a maximum absorption wavelength at 412 nm was found, and the compound peak was not clear, which may indicate that an interaction between the compound and the matrix occurred. A synergetic effect between the intrinsic emission of the matrix and the fluorescence of 3a is found on the OIH-doped matrices.

The Electric Field Responses of Inorganic Ionogels and Poly(ionic liquid)s

Ionic liquids (ILs) are a class of pure ions with melting points lower than 100 °C. They are getting more and more attention because of their high thermal stability, high ionic conductivity and dielectric properties. The unique dielectric properties aroused by the ion motion of ILs makes ILs-contained inorganics or organics responsive to electric field and have great application potential in smart electrorheological (ER) fluids which can be used as the electro-mechanical interface in engineering devices. In this review, we summarized the recent work of various kinds of ILs-contained inorganic ionogels and poly(ionic liquid)s (PILs) as ER materials including their synthesis methods, ER responses and dielectric analysis. The aim of this work is to highlight the advantage of ILs in the synthesis of dielectric materials and their effects in improving ER responses of the materials in a wide temperature range. It is expected to provide valuable suggestions for the development of ILs-contained inorganics and PILs as electric field responsive materials.

Frontiers in poly(ionic liquid)s: syntheses and applications

We review recent works on the synthesis and application of poly(ionic liquid)s (PILs). Novel chemical structures, different synthetic strategies and controllable morphologies are introduced as a supplement to PIL systems already reported. The primary properties determining applications, such as ionic conductivity, aqueous solubility, thermodynamic stability and electrochemical/chemical durability, are discussed. Furthermore, the near-term applications of PILs in multiple fields, such as their use in electrochemical energy materials, stimuli-responsive materials, carbon materials, and antimicrobial materials, in catalysis, in sensors, in absorption and in separation materials, as well as several special-interest applications, are described in detail. We also discuss the limitations of PIL applications, efforts to improve PIL physics, and likely future developments.