Recent Advances in Metal-Containing Polymer Hydrogels

Fabrication of Zinc(II) Mediated Poly(Acrylamide Co Acrylic Acid) Hydrogel with Thixotropic and Tribological Properties

Hydrogels have emerged as promising candidates for biomedical applications, such as replacing natural articular cartilage, owing to their unique viscoelastic properties. However, sufficient mechanical properties, self-healing ability, and adhesive nature are some issues limiting its application window. Here, a facile one-pot synthesis of dual cross-linked zinc-coordinated copolymer hydrogels is presented. The network structure of the copolymer hydrogels is strategically developed via dynamic and reversible physical cross-linking by Zn2+ ions and simultaneous covalent cross-linking through a covalent cross-linker viz methylene bisacrylamide. Fourier-transform infrared (FTIR), X-ray diffraction (XRD) scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) analysis have thoroughly characterized the structure of the synthesized hydrogels. The introduction of Zn2+ offers dynamic and reversible complexation, leading to excellent mechanical properties and self-healing features. Moreover, the percentage of the equilibrium water content of zinc-coordinated copolymer hydrogel samples is comparable with that of natural articular cartilage. The Shear sliding study shows the dominant adhesive behavior of HGel-Zn(NO3)2 sample compared to the parent HGel sample. This facile dual cross-linked hydrogel, HGel-Zn(NO3)2, with a combination of good mechanical properties, efficient self-recovery, adequate water content, and favorable adhesive nature, seems very promising to mimic the articular cartilage.

Antibacterial polylysine-containing hydrogels for hemostatic and wound healing applications: preparation methods, current advances and future perspectives

The treatment of various types of wounds such as dermal wounds, multidrug resistant bacteria-infected wounds, and chronic diabetic wounds is one of the critical challenges facing healthcare systems. Delayed wound healing can impose a remarkable burden on patients and health care professionals. In this case, given their unique three-dimensional porous structure, biocompatibility, high hydrophilicity, capability to provide a moist environment while absorbing wound exudate, permeability to both gas and oxygen, and tunable mechanical properties, hydrogels with antibacterial function are one of the most promising candidates for wound healing applications. Polylysine is a cationic polymer with the advantages of inherent antibacterial properties, biodegradability, and biocompatibility. Therefore, its utilization to engineer antibacterial hydrogels for accelerating wound healing is of great interest. In this review, we initially discuss polylysine properties, and then focus on the most recent advances in polylysine-containing hydrogels (since 2016) prepared using various chemical and physical crosslinking methods for hemostasis and wound healing applications. Finally, the challenges and future directions in the engineering of these antibacterial hydrogels for wound healing are discussed.

Metal-Drug Coordination Nanoparticles and Hydrogels for Enhanced Delivery

Drug delivery is a key component of nanomedicine, and conventional delivery relies on the adsorption or encapsulation of drug molecules to a nanomaterial. Many delivery vehicles contain metal ions, such as metal-organic frameworks, metal oxides, transition metal dichalcogenides, MXene, and noble metal nanoparticles. These materials have a high metal content and pose potential long-term toxicity concerns leading to difficulties for clinical approval. In this review, recent developments are summarized in the use of drug molecules as ligands for metal coordination forming various nanomaterials and soft materials. In these cases, the drug-to-metal ratio is much higher than conventional adsorption-based strategies. The drug molecules are divided into small-molecule drugs, nucleic acids, and proteins. The formed hybrid materials mainly include nanoparticles and hydrogels, upon which targeting ligands can be grafted to improve efficacy and further decrease toxicity. The application of these materials for addressing cancer, viral infection, bacterial infection inflammatory bowel disease, and bone diseases is reviewed. In the end, some future directions are discussed from fundamental research, materials science, and medicine.

Terahertz Spectroscopic Insight into the Hydrogelation of Copper Ion-Coordinated Poly(vinyl alcohol)

Metal-coordinated hydrogels are becoming increasingly popular in the biomedical field due to their unique properties. However, the mechanism behind gel forming involving metal ions is not yet fully understood. In this work, terahertz spectroscopy was used to investigate the role of interfacial water in the gelation process of copper ion-coordinated poly(vinyl alcohol) hydrogels. The results showed that the binding of copper ions could alter the interfacial hydration dynamics of the poly(vinyl alcohol) polymers. Combined with the results of differential scanning calorimetry (DSC), we propose a possible hydration layer-mediated mechanism for the formation of cooper ion-coordinated hydrogel during the freeze-thaw cycle. These results highlight the value of terahertz spectroscopy as a sensor for studying the hydration process in hydrogels and provide an important clue for understanding the mechanism of hydrogelation in ion-coordinated hydrogels.

Stimuli-responsive polysaccharide-based smart hydrogels for diabetic wound healing: Design aspects, preparation methods and regulatory perspectives

Diabetes adversely affects wound-healing responses, leading to the development of chronic infected wounds. Such wound microenvironment is characterized by hyperglycaemia, hyperinflammation, hypoxia, variable pH, upregulation of matrix metalloproteinases, oxidative stress, and bacterial colonization. These pathological conditions pose challenges for the effective wound healing. Therefore, there is a paradigm shift in diabetic wound care management wherein abnormal pathological conditions of the wound microenvironment is used as a trigger for controlling the drug release or to improve properties of wound dressings. Hydrogels composed of natural polysaccharides showed tremendous potential as wound dressings as well as stimuli-responsive materials due to their unique properties such as biocompatibility, biodegradability, hydrophilicity, porosity, stimuli-responsiveness etc. Hence, polysaccharide-based hydrogels have emerged as advanced healthcare materials for diabetic wounds. In this review, we presented important aspects for the design of hydrogel-based wound dressings with an emphasis on biocompatibility, biodegradability, entrapment of therapeutic agents, moisturizing ability, swelling, and mechanical properties. Further, various crosslinking methods that enable desirable properties and stimuli responsiveness to the hydrogels have been mentioned. Subsequently, state-of-the-art developments in mono- and multi- stimuli-responsive hydrogels have been presented along with the case studies. Finally regulatory perspectives, challenges for the clinical translation and future prospects have been discussed.

Ions-Induced Alginate Gelation According to Elemental Analysis and a Combinatorial Approach

This study considers the potential of elemental analysis of polysaccharide ionotropic gels in elucidating the junction zones for different divalent cations. The developed algorithm ensures the correct separation of contributions from physically adsorbed and structure-forming ionic compounds, with the obtained results scaled to alginate C12 block. Possible versions of chain association into dimers and their subsequent integration into flat junction zones were analyzed within the framework of the "egg-box" model. The application of combinatorial analysis made it possible to derive theoretical relations to find the probability of various types of egg-box cell occurrences for alginate chains with arbitrary monomeric units ratio μ = M/G, which makes it possible to compare experimental data for alginates of different origins. Based on literature data and obtained chemical formulas, the possible correspondence of concrete biopolymer cells to those most preferable for filling by alkaline earth cations was established. The identified features of elemental composition suggest the formation of composite hydrated complexes with the participation of transition metal cations. The possibility of quantitatively assessing ordered secondary structures formed due to the physical sorption of ions and molecules from environment, correlating with the sorption capabilities of Me2+ alginate, was established.

Double network hydrogels: Design, fabrication, and application in biomedicines and foods

Research on the design, fabrication, and application of double network (DN) hydrogels, assembled from pairs of polymers, has grown recently due to their unique structural, physicochemical, and functional properties. DN hydrogels can be designed to exhibit a broader range of functional attributes than single network (SN) ones, which extends their applications in various fields. There has been strong interest in the development of biopolymer DN hydrogels because of their environmental, sustainability, and safety benefits. However, there is limited knowledge on the formation and application of these novel materials. This article reviews the principles underlying the design and fabrication of hydrogels using different crosslinking approaches, including covalent and/or non-covalent bonding, and the formation mechanisms, network structures, and functional attributes of different DN hydrogels. The impact of polymer composition, structural organization, and bonding on the mechanical and functional properties of DN hydrogels is reviewed. Potential applications of these hydrogels are highlighted, including in tissue engineering, biomedicines, and foods. The functional attributes of DN hydrogels can be tailored to each of these applications by careful selection of the biopolymers and crosslinking mechanisms used to assemble them. Finally, areas where further research are needed to overcome the current limitations of DN hydrogels are highlighted.

MnO2 Decorated Metal-Organic Framework-Based Hydrogel Relieving Tumor Hypoxia for Enhanced Photodynamic Therapy

Photodynamic therapy (PDT) has emerged as a promising cancer treatment modality; however, its therapeutic efficacy is greatly limited by tumor hypoxia. In this study, a metal-organic framework (MOF)-based hydrogel (MOF Gel) system that synergistically combines PDT with the supply of oxygen is designed. Porphyrin-based Zr-MOF nanoparticles are synthesized as the photosensitizer. MnO2 is decorated onto the surface of the MOF, which can effectively convert H₂O₂ into oxygen. Simultaneously, the incorporation of MnO2 -decorated MOF (MnP NPs) into a chitosan hydrogel (MnP Gel) serves to enhance its stability and retention at the tumor site. The results show that this integrated approach significantly improves tumor inhibition efficiency by relieving tumor hypoxia and enhancing PDT. Overall, the findings underscore the potential for employing nano-MOF-based hydrogel systems as promising agents for cancer therapy, thus advancing the application of multifunctional MOFs in cancer treatment.

Hybrid Shear-thinning Hydrogel Integrating Hyaluronic Acid with ROS-Responsive Nanoparticles

Nanoparticle (NP) supra-assembly offers unique opportunities to tune macroscopic hydrogels' mechanical strength, material degradation, and drug delivery properties. Here, synthetic, reactive oxygen species (ROS)-responsive NPs are physically crosslinked with hyaluronic acid (HA) through guest-host chemistry to create shear-thinning NP/HA hydrogels. A library of triblock copolymers composed of poly(propylene sulfide)-bl-poly(N,N-dimethylacrylamide)-bl-poly(N,N-dimethylacrylamide-co-N-(1-adamantyl)acrylamide) are synthesized with varied triblock architectures and adamantane grafting densities and then self-assembled into NPs displaying adamantane on their corona. Self-assembled NPs are mixed with β-cyclodextrin grafted HA to yield eighteen NP/HA hydrogel formulations. The NP/HA hydrogel platform demonstrates superior mechanical strength to HA-only hydrogels, susceptibility to oxidative/enzymatic degradation, and inherent cell-protective, antioxidant function. The performance of NP/HA hydrogels is shown to be affected by triblock architecture, guest/host grafting densities, and HA composition. In particular, the length of the hydrophilic second block and adamantane grafting density of self-assembled NPs significantly impacts hydrogel mechanical properties and shear-thinning behavior, while ROS-reactivity of poly(propylene sulfide) protects cells from cytotoxic ROS and reduces oxidative degradation of HA compared to HA-only hydrogels. This work provides insight into polymer structure-function considerations for designing hybrid NP/HA hydrogels and identifies antioxidant, shear-thinning hydrogels as promising injectable delivery platforms for small molecule drugs and therapeutic cells.

Ion-Induced Polysaccharide Gelation: Peculiarities of Alginate Egg-Box Association with Different Divalent Cations

Structural aspects of polysaccharide hydrogels based on sodium alginate and divalent cations Ba²⁺, Ca²⁺, Sr²⁺, Cu²⁺, Zn²⁺, Ni²⁺ and Mn²⁺ was studied using data on hydrogel elemental composition and combinatorial analysis of the primary structure of alginate chains. It was shown that the elemental composition of hydrogels in the form of freezing dried microspheres gives information on the structure of junction zones in the polysaccharide hydrogel network, the degree of filling of egg-box cells by cations, the type and magnitude of the interaction of cations with alginate chains, the most preferred types of alginate egg-box cells for cation binding and the nature of alginate dimers binding in junction zones. It was ascertained that metal-alginate complexes have more complicated organization than was previously desired. It was revealed that in metal-alginate hydrogels, the number of cations of various metals per C12 block may be less than the limiting theoretical value equal to 1 for completely filled cells. In the case of alkaline earth metals and zinc, this number is equal to 0.3 for calcium, 0.6 for barium and zinc and 0.65-0.7 for strontium. We have determined that in the presence of transition metals copper, nickel and manganese, a structure similar to an egg-box is formed with completely filled cells. It was determined that in nickel-alginate and copper-alginate microspheres, the cross-linking of alginate chains and formation of ordered egg-box structures with completely filled cells are carried out by hydrated metal complexes with complicated composition. It was found that an additional characteristic of complex formation with manganese cations is the partial destruction of alginate chains. It has been established that the existence of unequal binding sites of metal ions with alginate chains can lead to the appearance of ordered secondary structures due to the physical sorption of metal ions and their compounds from the environment. It was shown that hydrogels based on calcium alginate are most promising for absorbent engineering in environmental and other modern technologies.

Metal-coordination synthesis of a natural injectable photoactive hydrogel with antibacterial and blood-aggregating functions for cancer thermotherapy and mild-heating wound repair

Photothermal therapy (PTT) is a promising approach for treating cancer. However, it suffers from the formation of local lesions and subsequent bacterial infection in the damaged area. To overcome these challenges, the strategy of mild PTT following the high-temperature ablation of tumors is studied to achieve combined tumor suppression, wound healing, and bacterial eradication using a hydrogel. Herein, Bi₂S₃ nanorods (NRs) are employed as a photothermal agent and coated with hyaluronic acid to obtain BiH NRs with high colloidal stability. These NRs and allantoin are loaded into an injectable Fe³⁺-coordinated hydrogel composed of sodium alginate (Alg) and Farsi gum (FG), which is extracted from Amygdalus scoparia Spach. The hydrogel can be used for localized cancer therapy by high-temperature PTT, followed by wound repair through the combination of mild hyperthermia and allantoin-mediated induction of cell proliferation. In addition, an outstanding blood clotting effect is observed due to the water-absorbing ability and negative charge of FG and Alg as well as the porous structure of hydrogels. The hydrogels also eradicate infection owing to the local heat generation and intrinsic antimicrobial activity of the NRs. Lastly, in vivo studies reveal an efficient photothermal-based tumor eradication and accelerated wound healing by the hydrogel.

Ca2+ and Ag+ orient low-molecular weight amphiphile self-assembly into "nano-fishnet" fibrillar hydrogels with unusual β-sheet-like raft domains

Low-molecular weight gelators (LMWGs) are small molecules (M_w < ∼1 kDa), which form self-assembled fibrillar network (SAFiN) hydrogels in water when triggered by an external stimulus. A great majority of SAFiN gels involve an entangled network of self-assembled fibers, in analogy to a polymer in a good solvent. In some rare cases, a combination of attractive van der Waals and repulsive electrostatic forces drives the formation of bundles with a suprafibrillar hexagonal order. In this work, an unexpected micelle-to-fiber transition is triggered by Ca²⁺ or Ag⁺ ions added to a micellar solution of a novel glycolipid surfactant, whereas salt-induced fibrillation is not common for surfactants. The resulting SAFiN, which forms a hydrogel above 0.5 wt%, has a "nano-fishnet" structure, characterized by a fibrous network of both entangled fibers and β-sheet-like rafts, generally observed for silk fibroin, actin hydrogels or mineral imogolite nanotubes, but not known for SAFiNs. The β-sheet-like raft domains are characterized by a combination of cryo-TEM and SAXS and seem to contribute to the stability of glycolipid gels. Furthermore, glycolipid is obtained by fermentation from natural resources (glucose, rapeseed oil), thus showing that naturally engineered compounds can have unprecedented properties, when compared to the wide range of chemically derived amphiphiles.

Cation-Induced Fibrillation of Microbial Glycolipid Biosurfactant Probed by Ion-Resolved In Situ SAXS

Biological amphiphiles are molecules with a rich phase behavior. Micellar, vesicular, and even fibrillar phases can be found for the same molecule by applying a change in pH or by selecting the appropriate metal ion. The rich phase behavior paves the way toward a broad class of soft materials, from carriers to hydrogels. The present work contributes to understanding the fibrillation of a microbial glycolipid, glucolipid G-C18:1, produced by Starmerella bombicola ΔugtB1 and characterized by a micellar phase at alkaline pH and a vesicular phase at acidic pH. Fibrillation and prompt hydrogelation is triggered by adding either alkaline earth, Ca²⁺, or transition metal, Ag⁺, Fe²⁺, Al³⁺, ions to a G-C18:1 micellar solution. A specifically designed apparatus coupled to a synchrotron SAXS beamline allows the performing of simultaneous cation- and pH-resolved in situ monitoring of the morphological evolution from spheroidal micelles to crystalline fibers, when Ca²⁺ is employed, or to wormlike aggregates, when Fe²⁺ or Al³⁺ solutions are employed. The fast reactivity of Ag⁺ and the crystallinity of Ca²⁺-induced fibers suggest that fibrillation is driven by direct metal-ligand interactions, while the shape transition from spheroidal to elongated micelles with Fe²⁺ or Al³⁺ rather suggest charge screening between the lipid and the hydroxylated cation species.

New Materials Based on Polyvinylpyrrolidone-Containing Copolymers with Ferromagnetic Fillers

The article investigates the peculiarities of the effect of ferromagnetic fillers (FMFs) of various natures (Ni, Co, Fe, FeCo, SmCo₅) on the formation of the structure and properties of 2-hydroxyethylmethacrylate (HEMA) with polyvinylpyrrolidone (PVP) copolymers. The composites were characterized using FTIR-spectroscopy, SEM, DMTA, magnetometry of vibrating samples, specific electrical resistivity studies, and mechanical and thermophysical studies. The formation of a grafted spatially crosslinked copolymer (pHEMA-gr-PVP) was confirmed and it was established that the FMF introduction of only 10 wt.% into the copolymer formulation increased the degree of crosslinking of the polymer network by three times. The surface hardness of composites increased by 20–25%. However, the water content decreased by 16–18% and lay within 42–43 wt.%, which is a relatively high number. The heat resistance of dry composites was characterized by Vicat softening temperature, which was 39–42 °C higher compared to the unfilled material. It was established that the obtained composites were characterized by a coercive force of 200 kA × m⁻¹ and induction of a magnetic field at the poles of 4–5 mT and 10–15 mT, respectively. The introduction of FMF particles into pHEMA-gr-PVP copolymers, which, in the dry state, are dielectrics, provides them with electrical conductivity, which was evaluated by the specific volume resistance. Depending on the FMF nature and content, as well as their orientation in the magnetic field, the resistance of filled materials could be regulated within 10²–10⁶ Ohm·m. Therefore, the modification of HEMA with PVP copolymers by ferromagnetic fillers of various natures provides the possibility of obtaining materials with unique predicted properties and expands the fields of their use, for instance as magnetic sorbents for various applications, as well as the possibilities associated with their being electrically conductive materials that can respond by changing of electrical conductivity, depending on various factors.

Two-Dimensional and Three-Dimensional Ultrathin Multilayer Hydrogels through Layer-by-Layer Assembly

Stimuli-responsive multilayer hydrogels have opened new opportunities to design hierarchically organized networks with properties controlled at the nanoscale. These multilayer materials integrate structural, morphological, and compositional versatility provided by alternating layer-by-layer polymer deposition with the capability for dramatic and reversible changes in volumes upon environmental triggers, a characteristic of chemically cross-linked responsive networks. Despite their intriguing potential, there has been limited knowledge about the structure-property relationships of multilayer hydrogels, partly because of the challenges in regulating network structural organization and the limited set of the instrumental pool to resolve structure and properties at nanometer spatial resolution. This Feature Article highlights our recent studies on advancing assembly technologies, fundamentals, and applications of multilayer hydrogels. The fundamental relationships among synthetic strategies, chemical compositions, and hydrogel architectures are discussed, and their impacts on stimuli-induced volume changes, morphology, and mechanical responses are presented. We present an overview of our studies on thin multilayer hydrogel coatings, focusing on controlling and quantifying the degree of layer intermixing, which are crucial issues in the design of hydrogels with predictable properties. We also uncover the behavior of stratified "multicompartment" hydrogels in response to changes in pH and temperature. We summarize the mechanical responses of free-standing multilayer hydrogels, including planar thin coatings and films with closed geometries such as hollow microcapsules and nonhollow hydrogel microparticles with spherical and nonspherical shapes. Finally, we will showcase potential applications of pH- and temperature-sensitive multilayer hydrogels in sensing and drug delivery. The knowledge about multilayer hydrogels can advance the rational design of polymer networks with predictable and well-tunable properties, contributing to modern polymer science and broadening hydrogel applications.

Fabrication of Customizable Intraplaque Hemorrhage Phantoms for Magnetic Resonance Imaging

Purpose

Magnetic resonance (MR) imaging detection of methemoglobin, a molecular marker of intraplaque hemorrhage (IPH), in atherosclerotic plaque is a promising method of assessing stroke risk. However, the multicenter imaging studies required to further validate this technique necessitate the development of IPH phantoms to standardize images acquired across different scanners. This study developed a set of phantoms that modeled methemoglobin-laden IPH for use in MR image standardization.

Procedures

A time-stable material mimicking the MR properties of methemoglobin in IPH was created by doping agarose hydrogel with gadolinium and sodium alginate. This material was used to create a phantom that consisted of 9 cylindrical IPH sites (with sizes from 1 to 8 mm). Anatomical replicas of IPH-positive atherosclerosis were also created using 3D printed molds. These plaque replicas also modeled other common plaque components including a lipid core and atheroma cap. T1 mapping and a magnetization-prepared rapid acquisition gradient echo (MPRAGE) carotid imaging protocol were used to assess phantom realism and long-term stability.

Results

Cylindrical phantom IPH sites possessed a T1 time of 335 ± 51 ms and exhibited little change in size or MPRAGE signal intensity over 31 days; the mean (SD) magnitude of changes in size and signal were 6.4 % (2.7 %) and 7.3 % (6.7 %), respectively. IPH sites incorporated into complex anatomical plaque phantoms exhibited contrast comparable to clinical images.

Conclusions

The cylindrical IPH phantom accurately modeled the short T1 time characteristic of methemoglobin-laden IPH, with the IPH sites exhibiting little variation in imaging properties over 31 days. Furthermore, MPRAGE images of the anatomical atherosclerosis replicas closely matched those of clinical plaques. In combination, these phantoms will allow for IPH imaging protocol standardization and thus facilitate future multicenter IPH imaging.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11307-022-01722-4.

Assembly of Bioactive Nanoparticles via Metal-Phenolic Complexation

The integration of bioactive materials (e.g., proteins and genes) into nanoparticles holds promise in fields ranging from catalysis to biomedicine. However, it is challenging to develop a simple and broadly applicable nanoparticle platform that can readily incorporate distinct biomacromolecules without affecting their intrinsic activity. Herein, a metal-phenolic assembly approach is presented whereby diverse functional nanoparticles can be readily assembled in water by combining various synthetic and natural building blocks, including poly(ethylene glycol), phenolic ligands, metal ions, and bioactive macromolecules. The assembly process is primarily mediated by metal-phenolic complexes through coordination and hydrophobic interactions, which yields uniform and spherical nanoparticles (mostly <200 nm), while preserving the function of the incorporated biomacromolecules (siRNA and five different proteins used). The functionality of the assembled nanoparticles is demonstrated through cancer cell apoptosis, RNA degradation, catalysis, and gene downregulation studies. Furthermore, the resulting nanoparticles can be used as building blocks for the secondary engineering of superstructures via templating and cross-linking with metal ions. The bioactivity and versatility of the platform can potentially be used for the streamlined and rational design of future bioactive materials.

A review of recent advances in metal ion hydrogels: mechanism, properties and their biological applications

The mechanisms, common properties and biological applications of different types of metal ion hydrogels are summarized.

Incorporation of Barium Ions into Biomaterials: Dangerous Liaison or Potential Revolution?

In the present manuscript, a brief overview on barium, its possible utilization, and the aftermath of its behavior in organisms has been presented. As a bivalent cation, barium has the potential to be used in a myriad of biochemical reactions. A number of studies have exhibited both the unwanted outcome barium displayed and the advantages of barium laden compounds, tested in in vitro and in vivo settings. The plethora of prospective manipulations covered the area of hydrogels and calcium phosphates, with an end goal of examining barium's future in the tissue engineering. However, majority of data revert to the research conducted in the 20th century, without investigating the mechanisms of action using current state-of-the-art technology. Having this in mind, set of questions that are needed for possible future research arose. Can barium be used as a substitute for other biologically relevant divalent cations? Will the incorporation of barium ions hamper the execution of the essential processes in the organism? Most importantly, can the benefits outweigh the harm?

Synthesis of bimetallic nanoparticles loaded on to PNIPAM hybrid microgel and their catalytic activity

This study was designed to preparecarboxyl-functionalized poly (N-isopropylacrylamide) PNIPAM microgels having excellent catalytic properties.Recently, researchers are trying to fabricate cost effective and efficient hybrid catalytic materials for the synthesis of nitrogenous compounds along with enhanced optical properties. For the same motive, synthesis of carboxyl-functionalized PNIPAM microgels was performed by using polymerization of soap-free emulsion of N-isopropyl acrylamide, which is NIPAM along with acrylic acid (AA). The thiol group was introduced through the imide bond mediated by carbodiimide, between carboxyl-functionalized microgels through carboxyl group and aminoethanethiol (AET). Copper, Palladium and Cu/Pd nanoparticles were incorporated successfully into thiol-functionalized PNIPAM microgels through metals thiol linkage. The synthesized microgels and hybrid encompassing metallic nanoparticles were characterized in detail by using Transmission electron microscopy (TEM), Scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron (XPS) and Fourier transformed infrared spectroscopy for structural interpretation. The thermal properties of the pure and hybrid microgels were inspected by TG analysis. The prepared nanocomposites PNIPAM-Cu, PNIPAM-Pd and PNIPAM-Cu/Pd exhibited decent catalytic properties for the degradation of 4-Nitrophenol and methylene blue, but the bimetallic Cu/Pd have remarkable catalytic properties. The catalytic reaction followed pseudo-first-order reaction with rate constants 0.223 min-1, 0.173 min-1 for 4-Nitrophenol and methylene blue in that order. In this study,we were able to establish that Cu/Pd hybrid is an efficient catalyst for 4-Nitrophenol and methylene blue as compared to its atomic analogue.

From Supramolecular Hydrogels to Multifunctional Carriers for Biologically Active Substances

Supramolecular hydrogels are 3D, elastic, water-swelled materials that are held together by reversible, non-covalent interactions, such as hydrogen bonds, hydrophobic, ionic, host-guest interactions, and metal-ligand coordination. These interactions determine the hydrogels' unique properties: mechanical strength; stretchability; injectability; ability to self-heal; shear-thinning; and sensitivity to stimuli, e.g., pH, temperature, the presence of ions, and other chemical substances. For this reason, supramolecular hydrogels have attracted considerable attention as carriers for active substance delivery systems. In this paper, we focused on the various types of non-covalent interactions. The hydrogen bonds, hydrophobic, ionic, coordination, and host-guest interactions between hydrogel components have been described. We also provided an overview of the recent studies on supramolecular hydrogel applications, such as cancer therapy, anti-inflammatory gels, antimicrobial activity, controlled gene drug delivery, and tissue engineering.

Dually cross-linked single networks: structures and applications

Cross-linked polymers have attracted an immense attention over the years, however, there are many flaws of these systems, e.g. softness and brittleness; such materials possess non-adjustable properties and cannot recover from damage and thus are limited in their practical applications. Supramolecular chemistry offers a variety of dynamic interactions that when integrated into polymeric gels endow the systems with reversibility and responsiveness to external stimuli. A combination of different cross-links in a single gel could be the key to tackle these drawbacks, since covalent or chemical cross-linking serve to maintain the permanent shape of the material and to improve overall mechanical performance, whereas non-covalent cross-links impart dynamicity, reversibility, stimuli-responsiveness and often toughness to the material. In the present review we sought to give a comprehensive overview of the progress in design strategies of different types of dually cross-linked single gels made by researchers over the past decade as well as the successful implementations of these advances in many demanding fields where versatile multifunctional materials are required, such as tissue engineering, drug delivery, self-healing and adhesive systems, sensors as well as shape memory materials and actuators.

Bioinspired double network hydrogels: from covalent double network hydrogels via hybrid double network hydrogels to physical double network hydrogels

The design and synthesis of double network (DN) hydrogels that can mimic the properties and/or structure of natural tissue has flourished in recent years, overcoming the bottlenecks of mechanical performance of single network hydrogels and extending their potential applications in various fields. In recent years, such bioinspired DN hydrogels with extraordinary mechanical performance, excellent biocompatibility, and considerable strength have been demonstrated to be promising candidates for biomedical applications, such as tissue engineering and biomedicine. In this minireview, we provide an overview of the recent developments of bioinspired DN hydrogels defined as DN hydrogels that mimic the properties and/or structure of natural tissue, ranging from, e.g., anisotropically structured DN hydrogels, via ultratough energy dissipating DN hydrogels to dynamic, reshapable DN hydrogels. Furthermore, we discuss future perspectives of bioinspired DN hydrogels for biomedical applications.

ROMP Synthesis of Side-Chain Ferrocene-Containing Polyelectrolyte and Its Redox-Responsive Hydrogels Showing Dramatically Improved Swelling with β-Cyclodextrin

A new side-chain ferrocene (Fc)-containing polyelectrolyte has been synthesized by controlled ring-opening metathesis polymerization of a water-soluble Fc-containing norbornene-based quaternary ammonium salt, as well as the corresponding covalently cross-linked polyelectrolyte hydrogel. In order to provide Fc-containing supramolecular polyelectrolyte hydrogels whose swelling property is largely improved by host-guest interaction, a covalently cross-linked polyelectrolyte hydrogel is soaked into the β-CD aqueous solution to form β-CD@Fc supramolecular polyelectrolyte hydrogel, or alternatively the quaternary ammonium salt supramolecular monomer is first formed, then copolymerized with a crosslinking agent to fabricate the supramolecular hydrogel with better water absorption ability. All the Fc-containing hydrogels exhibited good redox-responsiveness with swelling-shrinking behaviors by chemically reversibly adjusting the disassembly/assembly of β-CD@Fc inclusion complexes. This is the first example of side-chain Fc-containing polycationic supramolecular hydrogels possessing swelling-shrinking properties based on the splitting/combining of β-CD and Fc units, and potential applications are expected as controlled drug delivery and actuators.

Di(2-picolyl)amine-functionalized poly(ethylene glycol) hydrogels with tailorable metal–ligand coordination crosslinking

A new class of metallo-hydrogels has been developed using di(2-picolyl)amine (DPA)-functionalized 4-arm polyethylene glycol (4A-PEG-DPAn) polymers crosslinked by metal–ligand coordination.

Hydrogels of Polysaccharide Carboxymethyl Hydroxypropyl Guar Crosslinked by Multivalent Metal Ions

Abstract

Hydrogels of polysaccharide carboxymethyl hydroxypropyl guar crosslinked by chromium(III) ions are synthesized. The effect of crosslinker concentration on the mechanical behavior of the gels is studied, and the amount of chromium compounds able to interact with polymer chains and the amount of carboxyl groups of the polymer involved in crosslinking are compared. It is shown that the elastic modulus of the gels attains a constant value when not all but only about 10% functional groups interact with chromium compounds. At high concentrations, crosslinker molecules basically bind to one functional group; as a result, the gel recharges. This binding proceeds until all carboxyl groups are filled.

NIR-responsive metal-containing polymer hydrogel for light-controlled microvalve

NIR-responsive metal-containing polymer hydrogel was prepared via the radical copolymerization of N-isopropylacrylamide and an osmium aromatic complex. It has excellent photothermal property and can be used as a light-controlled microvalve.

Development of Greener D-Metal Inorganic Crosslinkers for Polymeric Gels Used in Water Control in Oil and Gas Applications

Crosslinkable polymers, such as polyacrylamide (PAM), are widely applied for water control in oil and gas reservoirs. Organic and inorganic crosslinkers are used to formulate a gel with PAM. Although chromium has a high level of toxicity, it has been implemented as an effective crosslinker combined with carboxylates because of the controllability of crosslinking time at low temperatures. The objective of this work was to develop greener d-metal inorganic crosslinkers based on cobalt, copper, and nickel to replace chromium for application at reservoir conditions. The obtained results showed that the gelation chemistry of the developed systems depends on the metal charge density. The gelation of PAM with d-metals depends on pH and temperature for low- and high-charge density, respectively. Cobalt (II) acetate (CoAc) was effective at high temperatures (130–150 °C) and forms (4% CoAc + 9%PAM) stable, and strong gels at a pH > 7 with a storage modulus exceeding 4300 Pa. However, Nickel Acetate and Cupper Acetate formed stable weak gels at low temperatures (50–70 °C) and a pH > 6 and gel decomposition was observed upon increasing the temperature. The developed formulations were compatible with low-salinity water (1000 ppm NaCl).

Self-healing biomaterials: The next generation is nano

The U.S. Agency for Healthcare Research and Quality estimates that there are over 1 million total hip and total knee replacements each year in the U.S. alone. Twenty five percent of those implants will experience aseptic loosening, and bone cement failure is an important part of this. Bone cements are based on poly(methyl methacrylate) (PMMA) systems that are strong but brittle polymers. PMMA-based materials are also essential to modern dental fillings, and likewise, the failure rates are high with lifetimes of 3-10 years. These brittle polymers are an obvious target for self-healing systems which could reduce revision surgeries and visits to dentist. Self-healing polymers have been described in the literature since 1996 and examples from Roman times are known, but their application in medicine has been challenging. This review looks at the development of self-healing biomaterials for these applications and the challenges that lie between development and the clinic. Many of the most promising formulations involve introducing nanoscale components which offer substantial potential benefits over their microscale counterparts especially in composite systems. There is substantial promise for translation, but issues with toxicity, robustness, and reproducibility of these materials in the complex environment of the body must be addressed. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Implantable Materials and Surgical Technologies > Nanomaterials and Implants.

Self-healing and shape memory metallopolymers: state-of-the-art and future perspectives

Recent achievements and problems associated with the use of metallopolymers as self-healing and shape memory materials are presented and evaluated.

Recent advances in metallopolymer-based drug delivery systems

Metallopolymers (MPs) or metal-containing polymers have shown great potential as new drug delivery systems (DDSs) due to their unique properties, including universal architectures, composition, properties and surface chemistry. Over the past few decades, the exponential growth of many new classes of MPs that deal with these issues has been demonstrated. This review presents and assesses the recent advances and challenges associated with using MPs as DDSs. Among the most widely used MPs for these purposes, metal complexes based on synthetic and natural polymers, coordination polymers, metal-organic frameworks, and metallodendrimers are distinguished. Particular attention is paid to the stimulus- and multistimuli-responsive metallopolymer-based DDSs. Of considerable interest is the use of MPs for combination therapy and multimodal systems. Finally, the problems and future prospects of using metallopolymer-based DDSs are outlined. The bibliography includes articles published over the past five years.

Cobalt-Cross-Linked, Redox-Responsive Spy Network Protein Hydrogels

Although assembly of recombinant proteins by SpyTag/SpyCatcher chemistry has proven to be a versatile approach for creating bioactive hydrogels, the resulting Spy networks often exhibit weak mechanics due to the poor efficiency of interchain cross-linking. Here we leverage metal/ligand (i.e., cobalt/His6-tag) coordination interactions to modulate the bulk mechanics of the protein networks. The drastic difference between the Co²⁺ and Co³⁺ complexes in thermodynamic and kinetic properties enabled us to regulate the materials' properties and to immobilize and release recombinant proteins in a redox-dependent manner. The resulting hydrogels are capable of not only supporting cell growth and proliferation, but also influencing specific cell signaling via immobilized growth factors such as leukemia inhibitory factor (LIF). The integrated use of stimuli-responsive metal coordination and SpyTag/SpyCatcher chemistry opens up a new dimension for designing bioactive protein materials.

Advances in crosslinking strategies of biomedical hydrogels

Biomedical hydrogels as sole repair matrices or combined with pre-seeded cells and bioactive growth factors are extensively applied in tissue engineering and regenerative medicine. Hydrogels normally provide three dimensional structures for cell adhesion and proliferation or the controlled release of the loading of drugs or proteins. Various physiochemical properties of hydrogels endow them with distinct applications. In this review, we present the commonly used crosslinking method for hydrogel synthesis involving physical and chemical crosslinks and summarize their current progress and future perspectives.

Embedding and Positioning of Two FeII4 L4 Cages in Supramolecular Tripeptide Gels for Selective Chemical Segregation

An unreported d,l-tripeptide self-assembled into gels that embedded FeII4 L4 metal-organic cages to form materials that were characterized by TEM, EDX, Raman spectroscopy, rheometry, UV/Vis and NMR spectroscopy, and circular dichroism. The cage type and concentration modulated gel viscoelasticity, and thus the diffusion rate of molecular guests through the nanostructured matrix, as gauged by 19 F and 1 H NMR spectroscopy. When two different cages were added to spatially separated gel layers, the gel-cage composite material enabled the spatial segregation of a mixture of guests that diffused into the gel. Each cage selectively encapsulated its preferred guest during diffusion. We thus present a new strategy for using nested supramolecular interactions to enable the separation of small molecules.

Equilibrium and kinetic studies for silver removal from aqueous solution by hybrid hydrogels

Hybrid hydrogels were prepared by blending Carboxymethyl chitosan (CMCts), Carboxymethyl cellulose (CMC) with Sodium sulfonate styrene (SSS) by 60-kGy gamma rays. The prepared hydrogels were utilized as silver-ion (Ag) sorbent under non- and competitive cases. Batch adsorption experiments were conducted in functional conditions including contact time, ratios of (CMC:CMCts) and SSS, pH value, temperature and adsorbent weight. Equilibrium contact time of 10 h. was obtained by the adsorption material. The optimal 4:2 ratio of (CMC:CMCts):SSS showed the Ag highest adsorption efficiency. The maximum percentage of Ag⁺ removal was achieved at the pH 5. The temperature effect on the adsorption ability of hybrid hydrogel indicated the Ag adsorption process was endothermic and spontaneous. The Langmuir isotherm model fitted Ag adsorption data well, assuming a monolayer adsorption with predicted maximum adsorption capacity of 451.74 × 10^-3 mg. g^-1. From the kinetic data, the process of Ag adsorption had higher agreement with the pseudo-2nd order model, predicting the amount of Ag⁺ uptake at different contact time intervals and at equilibrium.

Healing through Histidine: Bioinspired Pathways to Self-Healing Polymers via Imidazole⁻Metal Coordination

Biology offers a valuable inspiration toward the development of self-healing engineering composites and polymers. In particular, chemical level design principles extracted from proteinaceous biopolymers, especially the mussel byssus, provide inspiration for design of autonomous and intrinsic healing in synthetic polymers. The mussel byssus is an acellular tissue comprised of extremely tough protein-based fibers, produced by mussels to secure attachment on rocky surfaces. Threads exhibit self-healing response following an apparent plastic yield event, recovering initial material properties in a time-dependent fashion. Recent biochemical analysis of the structure-function relationships defining this response reveal a key role of sacrificial cross-links based on metal coordination bonds between Zn2+ ions and histidine amino acid residues. Inspired by this example, many research groups have developed self-healing polymeric materials based on histidine (imidazole)-metal chemistry. In this review, we provide a detailed overview of the current understanding of the self-healing mechanism in byssal threads, and an overview of the current state of the art in histidine- and imidazole-based synthetic polymers.

Progress in self-healing hydrogels assembled by host–guest interactions: preparation and biomedical applications

Preparation and biomedical applications of self-healing hydrogels assembled from hosts of cyclodextrins and cucurbit[n]urils with various guests were reviewed.

Dynamic covalent bond-based hydrogels with superior compressive strength, exceptional slice-resistance and self-healing properties

A novel dynamic-covalent bond-based single network hydrogel was developed, of which the failure compressive stress and strain as well as the failure tensile stress and strain could exceed 27.3 MPa and 98.4% as well as 0.23 MPa and 282.3%, respectively. In addition, the gel shows remarkable slice-resistance and self-healing properties.