1
|
Wang W, Cao J, Yu J, Tian F, Luo X, Hao Y, Huang J, Wang F, Zhou W, Xu J, Liu X, Yang H. Flexible Supercapacitors Based on Stretchable Conducting Polymer Electrodes. Polymers (Basel) 2023; 15:polym15081856. [PMID: 37112003 PMCID: PMC10144423 DOI: 10.3390/polym15081856] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2023] [Revised: 04/01/2023] [Accepted: 04/06/2023] [Indexed: 04/29/2023] Open
Abstract
Supercapacitors are widely used in various fields due to their high power density, fast charging and discharging speeds, and long service life. However, with the increasing demand for flexible electronics, integrated supercapacitors in devices are also facing more challenges, such as extensibility, bending stability, and operability. Despite many reports on stretchable supercapacitors, challenges still exist in their preparation process, which involves multiple steps. Therefore, we prepared stretchable conducting polymer electrodes by depositing thiophene and 3-methylthiophene on patterned 304 stainless steel (SS 304) through electropolymerization. The cycling stability of the prepared stretchable electrodes could be further improved by protecting them with poly(vinyl alcohol)/sulfuric acid (PVA/H2SO4) gel electrolyte. Specifically, the mechanical stability of the polythiophene (PTh) electrode was improved by 2.5%, and the stability of the poly(3-methylthiophene (P3MeT) electrode was improved by 7.0%. As a result, the assembled flexible supercapacitors maintained 93% of their stability even after 10,000 cycles of strain at 100%, which indicates potential applications in flexible electronics.
Collapse
Affiliation(s)
- Wen Wang
- Jiangxi Key Laboratory of Flexible Electronics, Flexible Electronics Innovation Institute, Jiangxi Science & Technology Normal University, Nanchang 330013, China
- School of Chemistry and Chemical Engineering, Jiangxi Science & Technology Normal University, Nanchang 330013, China
| | - Jie Cao
- Jiangxi Key Laboratory of Flexible Electronics, Flexible Electronics Innovation Institute, Jiangxi Science & Technology Normal University, Nanchang 330013, China
- School of Chemistry and Chemical Engineering, Jiangxi Science & Technology Normal University, Nanchang 330013, China
| | - Jiawen Yu
- Jiangxi Key Laboratory of Flexible Electronics, Flexible Electronics Innovation Institute, Jiangxi Science & Technology Normal University, Nanchang 330013, China
- School of Pharmacy, Jiangxi Science & Technology Normal University, Nanchang 330013, China
| | - Fajuan Tian
- Jiangxi Key Laboratory of Flexible Electronics, Flexible Electronics Innovation Institute, Jiangxi Science & Technology Normal University, Nanchang 330013, China
- School of Pharmacy, Jiangxi Science & Technology Normal University, Nanchang 330013, China
| | - Xiaoyu Luo
- Jiangxi Key Laboratory of Flexible Electronics, Flexible Electronics Innovation Institute, Jiangxi Science & Technology Normal University, Nanchang 330013, China
- School of Pharmacy, Jiangxi Science & Technology Normal University, Nanchang 330013, China
| | - Yiting Hao
- School of Pharmacy, Jiangxi Science & Technology Normal University, Nanchang 330013, China
| | - Jiyan Huang
- School of Pharmacy, Jiangxi Science & Technology Normal University, Nanchang 330013, China
| | - Fucheng Wang
- Jiangxi Key Laboratory of Flexible Electronics, Flexible Electronics Innovation Institute, Jiangxi Science & Technology Normal University, Nanchang 330013, China
- School of Pharmacy, Jiangxi Science & Technology Normal University, Nanchang 330013, China
| | - Weiqiang Zhou
- Jiangxi Key Laboratory of Flexible Electronics, Flexible Electronics Innovation Institute, Jiangxi Science & Technology Normal University, Nanchang 330013, China
- School of Chemistry and Chemical Engineering, Jiangxi Science & Technology Normal University, Nanchang 330013, China
| | - Jingkun Xu
- Jiangxi Key Laboratory of Flexible Electronics, Flexible Electronics Innovation Institute, Jiangxi Science & Technology Normal University, Nanchang 330013, China
- School of Chemistry and Chemical Engineering, Jiangxi Science & Technology Normal University, Nanchang 330013, China
- School of Chemistry and Molecular Engineering, Qingdao University of Science and Technology, Qingdao 266042, China
| | - Ximei Liu
- Jiangxi Key Laboratory of Flexible Electronics, Flexible Electronics Innovation Institute, Jiangxi Science & Technology Normal University, Nanchang 330013, China
- School of Pharmacy, Jiangxi Science & Technology Normal University, Nanchang 330013, China
| | - Hanjun Yang
- Jiangxi Key Laboratory of Flexible Electronics, Flexible Electronics Innovation Institute, Jiangxi Science & Technology Normal University, Nanchang 330013, China
- School of Pharmacy, Jiangxi Science & Technology Normal University, Nanchang 330013, China
| |
Collapse
|
2
|
Grellmann H, Bruns M, Lohse FM, Kruppke I, Nocke A, Cherif C. Development of an Elastic, Electrically Conductive Coating for TPU Filaments. MATERIALS (BASEL, SWITZERLAND) 2021; 14:7158. [PMID: 34885313 PMCID: PMC8658407 DOI: 10.3390/ma14237158] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/22/2021] [Revised: 11/16/2021] [Accepted: 11/18/2021] [Indexed: 11/16/2022]
Abstract
Electrically conductive filaments are used in a wide variety of applications, for example, in smart textiles and soft robotics. Filaments that conduct electricity are required for the transmission of energy and information, but up until now, most electrically conductive fibers, filaments and wires offer low mechanical elongation. Therefore, they are not well suited for the implementation into elastomeric composites and textiles that are worn close to the human body and have to follow a wide range of movements. In order to overcome this issue, the presented study aims at the development of electrically conductive and elastic filaments based on a coating process suited for multifilament yarns made of thermoplastic polyurethane (TPU). The coating solution contains TPU, carbon nanotubes (CNT) and N-Methyl-2-pyrrolidone (NMP) with varied concentrations of solids and electrically conductive particles. After applying the coating to TPU multifilament yarns, the mechanical and electrical properties are analyzed. A special focus is given to the electromechanical behavior of the coated yarns under mechanical strain loading. It is determined that the electrical conductivity is maintained even at elongations of up to 100%.
Collapse
Affiliation(s)
- Henriette Grellmann
- Institute of Textile Machinery and High Performance Material Technology, Technische Universität Dresden, 01062 Dresden, Germany; (M.B.); (F.M.L.); (I.K.); (A.N.); (C.C.)
| | | | | | | | | | | |
Collapse
|
3
|
Usman KAS, Qin S, Henderson LC, Zhang J, Hegh DY, Razal JM. Ti 3C 2T x MXene: from dispersions to multifunctional architectures for diverse applications. MATERIALS HORIZONS 2021; 8:2886-2912. [PMID: 34724521 DOI: 10.1039/d1mh00968k] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The exciting combination of high electrical conductivity, high specific capacitance and colloidal stability of two-dimensional Ti3C2Tx MXene (referred to as MXene) has shown great potential in a wide range of applications including wearable electronics, energy storage, sensors, and electromagnetic interference shielding. To realize its full potential, recent literature has reported a variety of solution-based processing methodologies to develop MXenes into multifunctional architectures, such as fibres, films and aerogels. In response to these recent critical advances, this review provides a comprehensive analysis of the diverse solution-based processing methodologies currently being used for MXene-architecture fabrication. A critical evaluation of the processing challenges directly affecting macroscale material properties and ultimately, the performance of the resulting prototype devices is also provided. Opportunities arising from the observed and foreseen challenges regarding their use are discussed to provide avenues for new designs and realise practical use in high performance applications.
Collapse
Affiliation(s)
- Ken Aldren S Usman
- Institute for Frontier Materials, Deakin University, Geelong, VIC, 3216, Australia.
| | - Si Qin
- Institute for Frontier Materials, Deakin University, Geelong, VIC, 3216, Australia.
| | - Luke C Henderson
- Institute for Frontier Materials, Deakin University, Geelong, VIC, 3216, Australia.
| | - Jizhen Zhang
- Institute for Frontier Materials, Deakin University, Geelong, VIC, 3216, Australia.
| | - Dylan Y Hegh
- Institute for Frontier Materials, Deakin University, Geelong, VIC, 3216, Australia.
| | - Joselito M Razal
- Institute for Frontier Materials, Deakin University, Geelong, VIC, 3216, Australia.
| |
Collapse
|
4
|
Seyedin S, Carey T, Arbab A, Eskandarian L, Bohm S, Kim JM, Torrisi F. Fibre electronics: towards scaled-up manufacturing of integrated e-textile systems. NANOSCALE 2021; 13:12818-12847. [PMID: 34477768 DOI: 10.1039/d1nr02061g] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The quest for a close human interaction with electronic devices for healthcare, safety, energy and security has driven giant leaps in portable and wearable technologies in recent years. Electronic textiles (e-textiles) are emerging as key enablers of wearable devices. Unlike conventional heavy, rigid, and hard-to-wear gadgets, e-textiles can lead to lightweight, flexible, soft, and breathable devices, which can be worn like everyday clothes. A new generation of fibre-based electronics is emerging which can be made into wearable e-textiles. A suite of start-of-the-art functional materials have been used to develop novel fibre-based devices (FBDs), which have shown excellent potential in creating wearable e-textiles. Recent research in this area has led to the development of fibre-based electronic, optoelectronic, energy harvesting, energy storage, and sensing devices, which have also been integrated into multifunctional e-textile systems. Here we review the key technological advancements in FBDs and provide an updated critical evaluation of the status of the research in this field. Focusing on various aspects of materials development, device fabrication, fibre processing, textile integration, and scaled-up manufacturing we discuss current limitations and present an outlook on how to address the future development of this field. The critical analysis of key challenges and existing opportunities in fibre electronics aims to define a roadmap for future applications in this area.
Collapse
Affiliation(s)
- Shayan Seyedin
- Molecular Sciences Research Hub, Department of Chemistry, Imperial College London, London, W12 0BZ, UK.
| | | | | | | | | | | | | |
Collapse
|
5
|
Qin S, Usman KAS, Hegh D, Seyedin S, Gogotsi Y, Zhang J, Razal JM. Development and Applications of MXene-Based Functional Fibers. ACS APPLIED MATERIALS & INTERFACES 2021; 13:36655-36669. [PMID: 34320810 DOI: 10.1021/acsami.1c08985] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/15/2023]
Abstract
The increasing interest toward wearable and portable electronic devices calls for multifunctional materials and fibers/yarns capable of seamless integration with everyday textiles. To date, one particular gap inhibiting the development of such devices is the production of robust functional fibers with improved electronic conductivity and electrochemical energy storage capability. Recent efforts have been made to produce functional fibers with 2D carbides known as MXenes to address these demands. Ti3C2Tx MXene, in particular, is known for its metallic conductivity and high volumetric capacitance, and has shown promise for fibers and textile-based devices when used either as an additive, coating or the main fiber component. In this spotlight article, we highlight the recent exciting developments in our diverse efforts to fabricate MXene functionalized fibers, along with a critical evaluation of the challenges in processing, which directly affect macroscale material properties and the performance of the subsequent prototype devices. We also provide our assessment of observed and foreseen challenges of the current manufacturing methods and the opportunities arising from recent advances in the development of MXene fibers and paving future avenues for textile design and practical use in advanced applications.
Collapse
Affiliation(s)
- Si Qin
- Institute for Frontier Materials, Deakin University, Geelong, Victoria 3216, Australia
| | - Ken Aldren S Usman
- Institute for Frontier Materials, Deakin University, Geelong, Victoria 3216, Australia
| | - Dylan Hegh
- Institute for Frontier Materials, Deakin University, Geelong, Victoria 3216, Australia
| | - Shayan Seyedin
- School of Engineering, Newcastle University, Newcastle upon Tyne NE1 7RU, United Kingdom
| | - Yury Gogotsi
- A.J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering, Drexel University, Philadelphia, Pennsylvania 19143, United States
| | - Jizhen Zhang
- Institute for Frontier Materials, Deakin University, Geelong, Victoria 3216, Australia
- Agricultural Products Processing Research Institute, Chinese Academy of Tropical Agricultural Sciences (CATAS), Zhanjiang, Guangdong 524002, China
| | - Joselito M Razal
- Institute for Frontier Materials, Deakin University, Geelong, Victoria 3216, Australia
| |
Collapse
|
6
|
Zhao J, Ji G, Zhang X, Hu R, Zheng J. Preparation of a high strength, rapid self-healing composite gel and its application in electrochemical capacitor. POLYMER 2021. [DOI: 10.1016/j.polymer.2020.123372] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/18/2023]
|
7
|
Liang Q, Zhang D, Ji P, Sheng N, Zhang M, Wu Z, Chen S, Wang H. High-Strength Superstretchable Helical Bacterial Cellulose Fibers with a "Self-Fiber-Reinforced Structure". ACS APPLIED MATERIALS & INTERFACES 2021; 13:1545-1554. [PMID: 33377390 DOI: 10.1021/acsami.0c19149] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
As a hydrogel membrane grown on the gas-liquid interface by bacterial culture that can be industrialized, bacterial cellulose (BC) cannot give full play to the advantages of its natural nanofibers. Conversion to the properties of nanofibers from high-performance to macrofibers represents a difficult material engineering challenge. Herein, we construct high-strength BC macrofibers with a "self-fiber-reinforced structure" using a dry-wet spinning method by adjusting the BC dissolution and concentration. The macrofiber with a tensile strength of 649 MPa and a strain of 17.2% can be obtained, which is one of the strongest and toughest cellulose fibers. In addition, the macrofiber can be fabricated to a superstretchable helical fiber without adding other elastomers or auxiliary materials. When the helical diameter is 1.6 mm, the ultimate stretch reaches 1240%. Meanwhile, cyclic tests show that the mechanical properties and morphology of the fiber remained stable after 100 times of 100% cyclic stretching. It is exciting that the helical fiber also owns outstanding knittability, washability, scalability, and dyeability. Furthermore, superstretchable functional helical BC fibers can be fabricated by embedding functional materials (carbon materials, conductive polymers, etc.) on BC or in the spinning dope, which can be made to wearable devices such as fiber solid-state supercapacitors. This work provides a scalable way for high-strength superstretchable and multifunctional fibers applied in wearable devices.
Collapse
Affiliation(s)
- Qianqian Liang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Dong Zhang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Peng Ji
- Co-Innovation Center for Textile Industry, Donghua University, Shanghai 201620, PR China
| | - Nan Sheng
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Minghao Zhang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Zhuotong Wu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Shiyan Chen
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Huaping Wang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| |
Collapse
|
8
|
|
9
|
Ji Z, Zhang X, Yan C, Jia X, Xia Y, Wang X, Zhou F. 3D Printing of Photocuring Elastomers with Excellent Mechanical Strength and Resilience. Macromol Rapid Commun 2019; 40:e1800873. [DOI: 10.1002/marc.201800873] [Citation(s) in RCA: 25] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/30/2018] [Revised: 02/11/2019] [Indexed: 12/21/2022]
Affiliation(s)
- Zhongying Ji
- State Key Laboratory of Solid LubricationLanzhou Institute of Chemical PhysicsChinese Academy of Sciences Lanzhou 730000 China
- Center of Materials Science and Optoelectronics EngineeringUniversity of Chinese Academy of Sciences Beijing 100039 China
| | - Xiaoqin Zhang
- State Key Laboratory of Solid LubricationLanzhou Institute of Chemical PhysicsChinese Academy of Sciences Lanzhou 730000 China
| | - Changyou Yan
- State Key Laboratory of Solid LubricationLanzhou Institute of Chemical PhysicsChinese Academy of Sciences Lanzhou 730000 China
- Center of Materials Science and Optoelectronics EngineeringUniversity of Chinese Academy of Sciences Beijing 100039 China
| | - Xin Jia
- School of Chemistry and Chemical EngineeringShihezi University Shihezi 832003 China
| | - Yanqiu Xia
- School of EnergyPower and Mechanical EngineeringNorth China Electric Power University Beijing 102206 China
| | - Xiaolong Wang
- State Key Laboratory of Solid LubricationLanzhou Institute of Chemical PhysicsChinese Academy of Sciences Lanzhou 730000 China
- School of Chemistry and Chemical EngineeringShihezi University Shihezi 832003 China
| | - Feng Zhou
- State Key Laboratory of Solid LubricationLanzhou Institute of Chemical PhysicsChinese Academy of Sciences Lanzhou 730000 China
| |
Collapse
|