Emerging trends in paper spray mass spectrometry: Microsampling, storage, direct analysis, and applications

Mass spectrometry for metabolomics analysis: Applications in neonatal and cancer screening

Chemical analysis by analytical instrumentation has played a major role in disease diagnosis, which is a necessary step for disease treatment. While the treatment process often targets specific organs or compounds, the diagnostic step can occur through various means, including physical or chemical examination. Chemically, the genome may be evaluated to give information about potential genetic outcomes, the transcriptome to provide information about expression actively occurring, the proteome to offer insight on functions causing metabolite expression, or the metabolome to provide a picture of both past and ongoing physiological function in the body. Mass spectrometry (MS) has been elevated among other analytical instrumentation because it can be used to evaluate all four biological machineries of the body. In addition, MS provides enhanced sensitivity, selectivity, versatility, and speed for rapid turnaround time, qualities that are important for instance in clinical procedures involving the diagnosis of a pediatric patient in intensive care or a cancer patient undergoing surgery. In this review, we provide a summary of the use of MS to evaluate biomarkers for newborn screening and cancer diagnosis. As many reviews have recently appeared focusing on MS methods and instrumentation for metabolite analysis, we sought to describe the biological basis for many metabolomic and additional omics biomarkers used in newborn screening and how tandem MS methods have recently been applied, in comparison to traditional methods. Similar comparison is done for cancer screening, with emphasis on emerging MS approaches that allow biological fluids, tissues, and breath to be analyzed for the presence of diagnostic metabolites yielding insight for treatment options based on the understanding of prior and current physiological functions of the body.

Elemental analysis of levitated solid samples by microwave-assisted laser induced breakdown spectroscopy

A novel analysis technique of elements at ambient conditions has been developed. The technique is based on microwave-assisted laser-induced breakdown spectroscopy (MW-LIBS) applied to acoustically levitated samples. The technique has been demonstrated using three solid samples with different properties and compositions. These are ore containing multiple elements (OREAS 520), aluminium oxide (Al3O2) and gypsum (CaSO4·2H2O). The mass of samples was 21 mg, 23 mg, and 55 mg for gypsum, mineral ore, and Al3O2, respectively. Significant signal enhancements were recorded for a variety of elements, using microwave-assisted laser-induced breakdown spectroscopy and levitation (MW-LIBS-Levitation). The signal enhancement for Mn I (403.07 nm), Al I (396.13 nm) and Ca II (393.85 nm) was determined as 123, 46, and 63 times, respectively. Moreover, it was found that MW-LIBS-Levitation minimises the self-absorption of the Ca I (422.67 nm) and Na I (588.99 nm and 589.59 nm) spectral lines. In addition to the signal enhancements, the levitation process produces a spinning motion in the solids with an angular frequency of 7 Hz. This feature benefits laser-based analysis as a fresh sample is introduced at each laser pulse, eliminating the need for the usual mechanical devices. Based on the single-shot analysis, it was found that ∼80% of the laser pulses produced successful MW-LIBS-Levitation detection, confirming an impressive repeatability of the process. This contactless analytical technique can be applied in ambient pressure and temperature conditions with high sensitivity, which can benefit disciplines such as forensics science, isotope analysis, and medical analysis, where the sample availability is often diminutive.

Rapid Screening of New Psychoactive Substances Using pDART-QqQ-MS

Drug abuse is a severe social problem worldwide. Particularly, the issue of new psychoactive substances (NPSs) have increasingly emerged. NPSs are structural or functional analogs of traditional illicit drugs, such as cocaine, cannabis, and amphetamine; these molecules provide the same or more severe neurological effects. Usually, immunoassays are utilized in the preliminary screening method. However, NPSs have poor detectability in commercially available immunoassay kits. Meanwhile, various chromatography combined with the mass spectrometry platform have been developed to quantify NPSs. Still, a significant amount of time and resources are required during these procedures. Therefore, we established a rapid analytical platform for NPSs employing paper-loaded direct analysis in real time triple quadrupole mass spectrometry (pDART-QqQ-MS). We implemented this platform for the semiquantitative analysis of forensic drug tests in urine. This platform significantly shrinks the analytical time of a single sample within 30 s and requires a low volume of the specimen. The platform can detect 21 NPSs in urine mixtures at a lower limit of qualification of concentration ranging from 20 to 75 nanograms per milliliter (ng mL-1) and is lower than the cutoff value of currently available immune-based devices for detecting multiple drugs (1000 ng mL-1). Urine samples from drug addicts have been collected to verify the platform's effectiveness. By combining efficiency and accuracy, our platform offers a promising solution for addressing the challenges posed by NPSs in drug abuse detection.

High-Performance, Low-Cost, Additively Manufactured Electrospray Ion Sources for Mass Spectrometry

We report novel 3D-printed electrospray sources for mass spectrometry (MS) that produce twice the signal strength of their mainstream counterparts. Leveraging 3D printing to fabricate in bulk nano- and microscale-featured electrospray emitters, this work shows a path for scalable integration in clinically relevant diagnostics. This solution improves the device performance by simultaneously tuning the surface hydrophilicity, solvent evaporation, and geometry. The emitters are made of stainless-steel (SS) 316L via binder jetting and coated in a conformal, hydrothermally grown zinc oxide nanowire (ZnONW) forest. The printed emitters are designed as surface mount devices that can be directly soldered to printed circuit boards with built-in digital microfluidics as part of an automated device assembly. The electrospray sources use a novel extractor electrode design that enables operation at ∼24% larger bias voltages compared with conventional MS cylindrical inlets. The 3D-printed electrospray emitters were characterized against their state-of-the-art counterparts (coated blades and paper spray). MS data from the 3D-printed electrospray emitters show detection of therapeutically relevant targets at 1 μg/ml concentrations with a variety of solvents; for nicardipine, such emitters attain 116% higher signal-to-noise ratios and far greater stability than their counterparts.

A strategy for the detection of benzodiazepine drugs using low-resolution paper-spray mass spectrometry for harm reduction drug checking

The ability to detect newly emerging substances is of great importance in reducing harms for people who use drugs. New psychoactive substances including novel benzodiazepines in the illicit drug supply have been linked to high rates of overdose deaths while complicating drug checking as an overdose prevention strategy. Paper-spray mass spectrometry (PS-MS) has emerged as a novel strategy to rapidly detect trace components in street drug samples. While targeted, low-resolution PS-MS methods have proven effective, newly emerging substances are often missed. To address this, a method was applied to low-resolution full-scan PS-MS data to aid in the early detection and identification of novel benzodiazepines in the unregulated drug supply. Using the developed method, true positives rates of 0.89 and 0.75 were achieved for bromazolam and etizolam in street samples obtained in a community drug checking service. The applicability of the method was further demonstrated for a novel benzodiazepine, desalkylgidazepam, that has recently emerged in the illicit drug supply.

Slug-Flow Microextraction Mass Spectrometry for Enhanced Detection of Analytes in Human Tear Fluids using Noninvasive Microsampling and Nanoelectrospray Ionization via a Capillary

In vivo noninvasive sampling and sensitive analysis of human tear fluids at the microliter level is an important but challenging task in investigating eye health. In this work, capillary microsampling coupled with slug-flow microextraction mass spectrometry (SFME-MS) was developed for enhanced detection of analytes in human tear fluids. As low as 1.0 μL of human tear fluid could be directly sampled using a capillary, and extraction/spray solvent was then loaded into the capillary to perform slug-flow microextraction and direct nanoelectrospray ionization (nESI) of analytes. All analytical procedures, including tear microsampling, microextraction, and ionization of analytes, were performed using a capillary. Enhanced detection of therapeutic drugs and disease biomarkers in human tear fluids was successfully demonstrated. Acceptable analytical performances including sensitivity, reproducibility, and quantitation were obtained. It is found that the use of SFME could improve the nESI-MS detection of trace analytes over 100-fold that depends on the chemical properties of analytes. Overall, this study showed that SFME-nESI-MS is a highly effective method for enhanced detection of trace analytes in tear fluids and is expected to be a potentially powerful tool in significant biological and clinical applications.

Ultra-low current electrospray ionization of chloroform solution for the analysis of perfluorinated sulfonic acids

RATIONALE

Femtoamp and picoamp electrospray ionization (ESI) characteristics of a nonpolar solvent were explored. The direct ESI mass spectrometry analysis of chloroform extract solution enabled rapid analysis of perfluorinated sulfonic acid analytes in drinking water.

METHODS

Neat chloroform solvent and extracts were directly used in a typical wire-in ESI setup using micrometer emitter tips. Ionization currents were measured with femtoamp sensitivity while ramping the spray voltage from 0 to -5000 V. Methanol was used as a comparison to illustrate the characteristics of electrospraying chloroform. The effects of spray voltage and inlet temperature were studied. A liquid-liquid extraction workflow was developed to analyze perfluorooctanoate sulfonate (PFOS) in drinking water using an ion-trap mass spectrometer.

RESULTS

The ionization onset of chloroform solution was 41 ± 17 fA at 300 V. The ionization current gradually increased with voltage while remaining below 100 pA when using voltages up to -5000 V. The ion signal of PFOS was significantly enhanced to improve the limit of detection (LoD) to 25 ppt in chloroform. Coupled with a liquid-liquid extraction workflow, LoD of 0.38-5.1 ppt and a quantitation range of 5-400 ppt were achieved for perfluorinated sulfonic compounds in 1-ml water samples.

CONCLUSIONS

Femtoamp and picoamp modes expand the solvent compatibility range of ESI and can enable quantitative analysis in parts per trillion (ppt) concentrations.

Biological Fluid Microsampling for Therapeutic Drug Monitoring: A Narrative Review

Therapeutic drug monitoring (TDM) is a specialized area of laboratory medicine which involves the measurement of drug concentrations in biological fluids with the aim of optimizing efficacy and reducing side effects, possibly modifying the drug dose to keep the plasma concentration within the therapeutic range. Plasma and/or whole blood, usually obtained by venipuncture, are the "gold standard" matrices for TDM. Microsampling, commonly used for newborn screening, could also be a convenient alternative to traditional sampling techniques for pharmacokinetics (PK) studies and TDM, helping to overcome practical problems and offering less invasive options to patients. Although technical limitations have hampered the use of microsampling in these fields, innovative techniques such as 3-D dried blood spheroids, volumetric absorptive microsampling (VAMS), dried plasma spots (DPS), and various microfluidic devices (MDS) can now offer reliable alternatives to traditional samples. The application of microsampling in routine clinical pharmacology is also hampered by the need for instrumentation capable of quantifying analytes in small volumes with sufficient sensitivity. The combination of microsampling with high-sensitivity analytical techniques, such as liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS), is particularly effective in ensuring high accuracy and sensitivity from very small sample volumes. This manuscript provides a critical review of the currently available microsampling devices for both whole blood and other biological fluids, such as plasma, urine, breast milk, and saliva. The purpose is to provide useful information in the scientific community to laboratory personnel, clinicians, and researchers interested in implementing the use of microsampling in their routine clinical practice.

From the laboratory to the field: Chemical analysis of colored smoke pyrotechnic formulations via mass spectrometry techniques

Smoke dyes are complex molecular systems that have the potential to form many molecular derivatives and fragments when deployed. The chemical analysis of smoke samples is challenging due to the adiabatic temperature of the pyrotechnic combustion and the molecular complexity of the physically dispersed reaction products. Presented here is the characterization of the reaction byproducts of a simulant Mk124 smoke signal on a multigram scale, which contain the dye disperse red 9 (1-(methylamino)anthraquinone), by ambient ionization mass spectrometry. Our previous work has examined the thermal decomposition of a simplified smoke system consisting of disperse red 9, potassium chlorate, and sucrose by anaerobic pyrolysis gas chromatography mass spectrometry performed at the laboratory milligram scale. The results from the lab scale test were compared with a fully functioned Mk124 in the field. To achieve this, Mk124 smokes were functioned in the presence of sampling swabs that collected byproduct residues from the smoke plume in the ambient environment. These swabs were then analyzed using ambient ionization mass spectrometry to identify the expended pyrotechnic residues, with particular interest in halogenated species. Previous work determined the toxicity of unforeseen byproducts identified on the laboratory scale, which were also detected in the field demonstrating the correlation of the laboratory testing to the fielded systems. By understanding the chemical composition of smokes and their reaction products, potential toxicity effects can be easily assessed, leading to safer formulations with improved performance. These results can help assess how smoke byproducts may impact Warfighter performance, personnel health, and the environment.

Development of a fast and robust liquid chromatography-mass spectrometry-based metabolomics analysis method for neonatal dried blood spots

Dried blood spot (DBS) samples have been widely used in many fields including newborn screening, with the advantages in transportation, storage and non-invasiveness. The DBS metabolomics research of neonatal congenital diseases will greatly expand the understanding of the disease. In this study, we developed a liquid chromatography-mass spectrometry-based method for neonatal metabolomics analysis of DBS. The influences of blood volume and chromatographic effects on the filter paper on metabolite levels were studied. The levels of 11.11 % metabolites were different between 75 μL and 35 μL of blood volumes used for DBS preparation. Chromatographic effects on the filter paper occurred in DBS prepared with 75 μL whole blood and 6.67 % metabolites had different MS responses when central disks were compared with outer disks. The DBS storage stability study showed that compared with - 80 °C storage, storing at 4 °C for 1 year had obvious influences on more than half metabolites. Storing at 4 °C and - 20 °C for short term (< 14 days) and - 20 °C for longer term (1 year) had less influences on amino acids, acyl-carnitines and sphingomyelins, but greater influences on partial phospholipids. Method validation showed that this method has a good repeatability, intra-day and inter-day precision and linearity. Finally, this method was applied to investigate metabolic disruptions of congenital hypothyroidism (CH), metabolic changes of CH newborns were mainly involved in amino acid metabolism and lipid metabolism.

Direct Coupling of SPME to Mass Spectrometry

Solid-phase microextraction devices are normally analyzed by gas or liquid chromatography. Their use has become increasingly widespread since their introduction in 1990, and nowadays most analytical laboratories use or have used SPME as an efficient and green method to perform analyte extraction and sample clean-up in one step. The SPME technique is intrinsically flexible, and allows for a high degree of optimization with regard to the extracting phase, as well as the way sample is analyzed. Since its introduction, researchers have been trying different ways to transfer analytes extracted from the solid phase to a mass spectrometer, with the aim to increase throughput and reduce solvent, gas usage and costs associated with conventional chromatographic techniques. Furthermore, but not less important, for pure fun of developing new, more efficient and sensitive analytical strategies! This chapter aims at providing a comprehensive overview of the most relevant non-chromatographic mass spectrometric approaches developed for SPME. Technical aspects of each SPME-MS approach will be discussed, highlighting their advantages, disadvantages and future potential developments. Particular emphasis will be given on the most recent direct coupling approaches using novel ionization approaches, and a concise overview of the existing applications will also be provided.

Microsampling tools for collecting, processing, and storing blood at the point-of-care

In the wake of the COVID-19 global pandemic, self-administered microsampling tools have reemerged as an effective means to maintain routine healthcare assessments without inundating hospitals or clinics. Finger-stick collection of blood is easily performed at home, in the workplace, or at the point-of-care, obviating the need for a trained phlebotomist. While the initial collection of blood is facile, the diagnostic or clinical utility of the sample is dependent on how the sample is processed and stored prior to transport to an analytical laboratory. The past decade has seen incredible innovation for the development of new materials and technologies to collect low-volume samples of blood with excellent precision that operate independently of the hematocrit effect. The final application of that blood (i.e., the test to be performed) ultimately dictates the collection and storage approach as certain materials or chemical reagents can render a sample diagnostically useless. Consequently, there is not a single microsampling tool that is capable of addressing every clinical need at this time. In this review, we highlight technologies designed for patient-centric microsampling blood at the point-of-care and discuss their utility for quantitative sampling as a function of collection material and technique. In addition to surveying methods for collecting and storing whole blood, we emphasize the need for direct separation of the cellular and liquid components of blood to produce cell-free plasma to expand clinical utility. Integrating advanced functionality while maintaining simple user operation presents a viable means of revolutionizing self-administered microsampling, establishing new avenues for innovation in materials science, and expanding access to healthcare.

Paper Spray Mass Spectrometry as an Effective Tool for Differentiating Coffees Based on Their Geographical Origins

With the rising trend of valuing flavor complexity of coffees, means to distinguish the properties of individual coffee sources is vital to the sustainable growth of the coffee industry. Herein, paper spray mass spectrometry (PS-MS), a simple technique with little sample preparation, was used to collect mass data from aqueous extracts of coffees from various sources. Thereafter, principal component analysis and linear discriminant analysis were used to successfully classify coffee samples (with 80-100 % accuracy) from various studies including the differentiations of Arabica and Robusta coffees, Arabica coffees from different countries, Robusta coffees from different geographical locations, and Arabica coffees from different locations within the same province in Thailand. With further insight from significant test via Fisher weight determination, this method was proved to be practical for differentiating coffees based on types and geographical origins, thus paving the way for broader applications.

Potential of desorption electrospray ionization and paper spray ionization with high-resolution mass spectrometry for the screening of sports doping agents in urine

In this work, desorption electrospray ionization and paper spray ionization both with high-resolution mass spectrometry (DESI-HRMS and PSI-HRMS) were explored for the fast and direct analysis of stimulants and diuretics in urine samples. The analysis was performed at a resolution of 70 000 FWHM (m/z 200) using a quadrupole-Orbitrap mass spectrometer in full scan acquisition mode, detecting stimulants and diuretics in positive and negative ion modes, respectively. The most critical parameters affecting the desorption and ionization efficiencies of compounds were optimized, paying particular attention to the optimization of the spray solvent for PSI-HRMS analysis and to the selection of the DESI sample substrate. For stimulants, the PSI-HRMS method performed better than DESI-HRMS, allowing the direct analysis of raw urine samples with better signal-to-noise ratios than DESI. However, results obtained for diuretics were not as satisfactory as we expected. The PSI-HRMS method was applied to the screening of 52 stimulants for doping control purposes, providing satisfactory detectability for most of them at the Minimum Reporting Level (MRL) in less than 2 minutes for each single analysis. Despite the advantages offered by the PSI-HRMS method, in this study is also included a discussion on the limitations observed because of the presence of interference for some compounds.

Ambient ionization mass spectrometry applied to new psychoactive substance analysis

In the past decade a plethora of drugs with similar effects to controlled psychoactive drugs, like cannabis, amfetamine (amphetamine), or lysergic acid diethylamide, have been synthesized. These drugs can collectively be classified under the term new psychoactive substances (NPS) and are used for recreational purposes. The novelty of the substances, alongside the rapid rate of emergence and structural variability, makes their detection as well as their legal control highly challenging, increasing the demand for rapid and easy-to-use analytical techniques for their detection and identification. Therefore, interest in ambient ionization mass spectrometry applied to NPS has grown in recent years, which is largely because it is relatively fast and simple to use and has a low operating cost. This review aims to provide a critique of the suitability of current ambient ionization techniques for the analysis of NPS in the forensic and clinical toxicology fields. Consideration is given to analytical performance and ease of implementation, including ionization efficiency, selectivity, sensitivity, quantification, analyte chemistry, molecular coverage, validation, and practicality.

The Effect of the Physical Morphology of Dried Biofluids on the Chemical Stability of Analytes Stored in Paper and Direct Analysis by Mass Spectrometry

Three-dimensional (3D) dried blood spheroids formed on hydrophobic paper are a new microsampling platform that can stabilize labile molecules in whole blood stored in ambient air at room temperature. In this study, we define the ideal conditions for preparing the dried blood spheroids. The physical morphology of 3D dried blood spheroids is found to be largely impacted by the unregulated relative humidity of the surrounding environment. A solution of KOH placed in an enclosed chamber offers a facile way to control humidity. We also report a general polymer coating strategy that serves to stabilize dried biofluids when prepared under ordinary ambient conditions without regulation of humidity. Dried blood spheroids coated in xanthan gum polymer exhibited enhanced chemical and physical stability. The same xanthan gum polymer provided chemical stability for 2D dried blood spots when compared with the conventional noncoated samples. We have expanded the application of xanthan gum to less viscous biofluids such as urine to induce an artificial protective barrier that also provides enhanced stability for labile performance-enhancing drugs stored at room temperature. The impact of polymer coating on direct biofluid analysis via paper spray mass spectrometry was determined by comparing the relative ionization efficiency, percent difference of ionization efficiency, and matrix effects of performance-enhancing drugs that were spiked in undiluted raw urine. Acceptable analytical performance was recorded for all three criteria, including high ionization efficiencies that ranged from 77 to 93% in the presence of the xanthan gum polymer.

Electrospray ionization mass spectrometry with wooden tips: A review

Electrospray ionization (ESI) is a powerful ionization technique in mass spectrometry (MS). There has been an increasing interest for the new development of ESI technique to extend its applications. ESI-MS with wooden tips (wooden-tip ESI-MS), an ESI technique invented in 2011, enabled not only new applications but also new insights into the ESI mechanism. In this review, the technical aspects of wooden-tip ESI-MS are described, the new features of wooden-tip ESI-MS for sampling and ionization of analytes are highlighted, and the important applications of wooden-tip ESI-MS in various fields in the past 10 years, including food safety, forensic investigation, environmental analysis, biomedical analysis and protein study, are summarized. The perspectives on the further development and applications of wooden-tip ESI-MS are also discussed.

Direct multiclass desorption electrospray ionization-tandem mass spectrometry method for the analysis of sleep inducers and ototoxic drugs in dried blood spots

RATIONALE

An unconventional and innovative approach for the quantitative determination of 11 ototoxic and narcoleptic drugs in whole blood is described. The multiclass method allows the inclusion of the most widespread drugs on the market (antihistamines, antidepressants, antihypertensives, anxiolytics, opioids, Z-drugs) responsible for 10% of occupational accidents.

METHODS

The developed procedure involved the use of the desorption electrospray ionization (DESI) interface for the direct analysis of dried blood spots (DBS). All the issues strictly connected to the chemical-physical characteristics of DBS and DESI (sample inhomogeneity, DBS support, DESI geometry and solvent) were carefully evaluated and innovative strategies were applied. Haematocrit was managed using a small and measured volume of blood (2 μL) with analysis of the entire DBS.

RESULTS

The proposed method was fully validated in terms of limits of detection, limits of quantitation (LOQs; between 60 pg/mm² and 1.6 ng/mm² ), linearity (one order of magnitude starting from LOQs) and inter- and intra-day precision (on three levels, with relative standard deviation values not exceeding 17%). Accuracy was calculated by comparison with an ultrahigh-performance liquid chromatography-tandem mass spectrometry method (suitable also as a confirmatory method).

CONCLUSIONS

Results showed a surprising sensitivity, demonstrating that this procedure could be suitable for applications in various fields, e.g. forensic analysis. Moreover, as a collateral benefit, it was discovered that the method is able to analyse very light traces left on plastic and glass surfaces by detached dried blood.

Automated Immunoassay Performed on a 3D Microfluidic Paper-Based Device for Malaria Detection by Ambient Mass Spectrometry

Microfluidic paper-based analytical devices (μPADs) are emerging as a prominent platform for disease detection, specifically in developing countries. This paper device offer simplicity and affordability not typically seen in centralized laboratory settings. However, detection limits in μPADs are inadequate and often require test results to be read within a specific time interval to ensure accuracy. To overcome these challenges, we are developing an on-chip mass spectrometry (MS) detection strategy for immunoassays performed on paper substrates. Herein, we present our initial results from a proof-of-concept study toward the development of μPADs capable of storing immunoassay reagents within the confinements of the 3D device, automatic splitting of biofluid into four individual test zones, immuno-capture of the disease biomarker, and on-chip MS detection of the captured species. The reported study encourages the development of point-of-care and direct-to-customer testing using disposable μPADs to collect samples, followed by sensitive analysis using portable MSs. We demonstrate this capability using malaria Plasmodium falciparum histidine-rich protein 2 (PfHRP2) antigen detection.

Recent Advances in Facemask Devices for In Vivo Sampling of Human Exhaled Breath Aerosols and Inhalable Environmental Exposures

Since the COVID-19 pandemic, the unprecedented use of facemasks has been requiring for wearing in daily life. By wearing facemask, human exhaled breath aerosols and inhaled environmental exposures can be efficiently filtered and thus various filtration residues can be deposited in facemask. Therefore, facemask could be a simple, wearable, in vivo, onsite and noninvasive sampler for collecting exhaled and inhalable compositions, and gain new insights into human health and environmental exposure. In this review, the recent advances in developments and applications of in vivo facemask sampling of human exhaled bacteria, viruses, proteins, and metabolites, and inhalable facemask contaminants and air pollutants, are reviewed. New features of facemask sampling are highlighted. The perspectives and challenges on further development and potential applications of facemask devices are also discussed.

Spherical Sampler Probes Enhance the Robustness of Ambient Ionization Mass Spectrometry for Rapid Drugs Screening

Ambient ionization mass spectrometry has become one of the most promising approaches for rapid and high-throughput screening of small molecules in complex biological matrices for emergency medicine, forensics, and food and agriculture applications. The simple procedures for sample collection and ionization without additional pretreatment are vital in these fields. Many efforts have been devoted to modifying various ambient ionization techniques to simplify the procedures and improve the robustness and sensitivity of the methods. Here, we demonstrate the implementation of rigid spherical sampler probes to improve the robustness of touch spray ionization mass spectrometry. The sphericity of the probes increases the stability of the cone-jet mode of electrospray, reduces the requirements for fine positioning of a sampler in the ion source, and decreases the possibility of corona discharge occurrence. The utilization of spherical sampler probes allows fast, non-invasive sampling, followed by rapid analysis for various drugs of different chemical classes in complex biological matrices, such as the whole blood or sebum collected from the skin surface. The linearity of the analytical signal response from drug concentration confirms the possibility of creating a simple semiquantitative method for small molecules monitoring using spherical sampler probes.

Thermal desorption bridged the gap between dielectric barrier discharge ionization and dried plasma spot samples for sensitive and rapid detection of fentanyl analogs in mass spectrometry

Guided by finite element simulations and 3D-printing, we constructed a semi-covered flat-TD surface for sufficient thermal desorption and ionization of fentanyl analogs from dried plasma/blood spot samples.

CHEMICAL REACTION MONITORING BY AMBIENT MASS SPECTROMETRY

Chemical reactions conducted in different media (liquid phase, gas phase, or surface) drive developments of versatile techniques for the detection of intermediates and prediction of reasonable reaction pathways. Without sample pretreatment, ambient mass spectrometry (AMS) has been applied to obtain structural information of reactive molecules that differ in polarity and molecular weight. Commercial ion sources (e.g., electrospray ionization, atmospheric pressure chemical ionization, and direct analysis in real-time) have been reported to monitor substrates and products by offline reaction examination. While the interception or characterization of reactive intermediates with short lifetime are still limited by the offline modes. Notably, online ionization technologies, with high tolerance to salt, buffer, and pH, can achieve direct sampling and ionization of on-going reactions conducted in different media (e.g., liquid phase, gas phase, or surface). Therefore, short-lived intermediates could be captured at unprecedented timescales, and the reaction dynamics could be studied for mechanism examinations without sample pretreatments. In this review, via various AMS methods, chemical reaction monitoring and mechanism elucidation for different classifications of reactions have been reviewed. The developments and advances of common ionization methods for offline reaction monitoring will also be highlighted.

The liquid micro junction-surface sampling probe (LMJ-SSP); a versatile ambient mass spectrometry interface

Ambient ionization methods have become important tools in mass spectrometry. The LMJ-SSP can significantly simplify/reduce lengthy sample preparation requirements associated with mass spectrometry analysis. Samples may be introduced through direct contact, insertion and droplet injection, enabling applications from drug discovery and surface analysis to tissue profiling and metabolic mapping. This review examines the underlying principles associated with the LMJ-SSP interface and highlights modifications of the original design that have extended its capability. We summarize different application areas that have exploited the method and describe potential future directions for the adaptable ambient ionization source.

Pediatric Therapeutic Drug Monitoring for Selective Serotonin Reuptake Inhibitors

Therapeutic drug monitoring (TDM) is uncommon in child and adolescent psychiatry, particularly for selective serotonin reuptake inhibitors (SSRIs)—the first-line pharmacologic treatments for depressive and anxiety disorders. However, TDM in children and adolescents offers the opportunity to leverage individual variability of antidepressant pharmacokinetics to shed light on non-response and partial response, understand drug-drug interactions, evaluate adherence, and characterize the impact of genetic and developmental variation in pharmacokinetic genes. This perspective aims to educate clinicians about TDM principles and examines evolving uses of TDM in SSRI-treated youths and their early applications in clinical practice, as well as barriers to TDM in pediatric patients. First, the impact of pharmacokinetic genes on SSRI pharmacokinetics in youths could be used to predict tolerability and response for some SSRIs (e.g., escitalopram). Second, plasma concentrations are significantly influenced by adherence, which may relate to decreased efficacy. Third, pharmacometric analyses reveal interactions with proton pump inhibitors, oral contraceptives, cannabinoids, and SSRIs in youths. Rapid developments in TDM and associated modeling have enhanced the understanding of variation in SSRI pharmacokinetics, although the treatment of anxiety and depressive disorders with SSRIs in youths often remains a trial-and-error process.

Paper-in-Facemask Device for Direct Mass Spectrometry Analysis of Human Respiratory Aerosols and Environmental Exposures via Wearable Continuous-Flow Adsorptive Sampling: A Proof-of-Concept Study

Facemasks are considered safe and wearable devices that cover the human mouth and nose for filtering exhaled aerosols and inhaled environmental exposures; various chemical and environmental residues thus can remain in facemasks. Therefore, direct analysis of residues in facemasks can be used to investigate the wearer's health and behavior. Here, we developed a simple paper-in-facemask sampling method for adsorbing a wearer's respiratory aerosol and environmental exposures by fixing paper strips at the outside and inside surfaces of facemasks, and the paper strips were then analyzed by paper spray mass spectrometry (PSMS) for directly detecting adsorbed analytes without any sample pretreatment. The applicability of this device was demonstrated by directly analyzing exhaled aerosolized saliva, breath metabolites, and inhalable environmental exposures. The technical aspects, including sampling time, sampling position, paper property, and spray solvent, were investigated. The sampling process was revealed to involve a continuous-flow adsorptive mechanism. These findings motivated us to extend this work and build a wearable sampling device that is capable of simultaneously monitoring both exhaled and inhaled biomarkers in situ to investigate human health and environmental exposure. This work highlights that facemasks are promising platforms for aerosol collection and direct MS analysis, which is expected to be a promising method for monitoring human health, diseases, and behaviors.

Microsampling with a Solid-Phase Extraction Cartridge: Storage and Online Mass Spectrometry Analysis

This study aims to introduce the concept of utilizing a solid-phase extraction (SPE) cartridge for remote biofluid collection, followed by direct sample analysis at a later time. For this, a dried matrix spot was prepared in a syringe, in the form of SPE cartridge for the first time to enable small biofluid collection (microsampling), storage, shipment, and online electrospray ionization (ESI) mass spectrometry (MS) analysis of the stored dried samples. The SPE sorbents were packed into an ESI syringe and the resultant cartridge was used for sampling small volumes (<20 μL) of different complex biological fluids including blood, plasma, serum, and urine. The collected sample was stored in the dry state within the confinement of the SPE sorbent at room temperature, and analyte stability (e.g., diazepam) was maintained for more than a year. Direct coupling of the SPE cartridge to MS provides excellent accuracy, precision, and sensitivity for analyzing illicit drugs present in the biofluid. The corresponding mechanism of wrong-way positive ion generation from highly basic elution solvents was explored. Without chromatography, our direct SPE-ESI-MS analysis technique afforded detection limits as low as 26 and 140 pg/mL for raw urine and untreated plasma, respectively. These promising results proved that the new syringe-based SPE cartridge can serve as a good alternative to conventional microsampling techniques in terms of analyte stability, ease of operation and versatility, and analytical sensitivity and speed.

Combining the Katritzky Reaction and Paper Spray Ionization Mass Spectrometry for Enhanced Detection of Amino Acid Neurotransmitters in Mouse Brain Sections

This work describes the development of a system that combines a derivatization protocol based on the Katritzky reaction with paper spray ionization mass spectrometry (PSI-MS) for the analysis of amino acid neurotransmitters in mouse brain tissues. The system is relatively simple, consisting of spraying the derivatization solution onto a mouse brain section mounted on a glass slide, applying a small volume of solvent to moisten the sample, pressing a triangular paper onto the sample surface to transfer the sample constituents to the paper surface, and using the paper as a substrate for PSI-MS analysis. The Katritzky reaction facilitated the ionization of the amino acids by reacting a pyrylium salt with the amino group of the analytes, forming very stable pyridinium cations, which greatly increased the sensitivity of the PSI-MS analysis. Most of the intensities of the amino acids modified by the Katritzky reaction were more than 10 times greater than the nonderivatized ones. The system was applied for the analysis of brain sections obtained from mice with Parkinson's disease, and the amino acids gamma-aminobutyric acid (GABA) and glycine (Gly), two compounds very well-known in studies of Parkinson's disease, were readily detected. The results suggest that the Katritzky reaction combined with PSI-MS might offer a significant advance in the knowledge on protocols that improve the sensitivity of detection of crucial biological compounds.

Electrical Detection of Molecular Transformations Associated with Chemical Reactions Using Graphene Devices

This study proposes a method to electrically detect chemical reactions that involve bond changes through reactions on graphene surfaces. To achieve a highly sensitive detection, we focused on the thiol-ene reaction that combines the maleimide and thiol groups. Graphene field-effect transistors (FETs) were used to detect the binding changes of the modified molecules. Graphene has high carrier mobility and is sensitive to changes in the electronic state of its surface. Graphene has been used as a sensor to detect low-concentration targets with high sensitivity. N-(9-Acridinyl)maleimide (NAM) was chosen as the modified molecule to immobilize maleimide on graphene through π-interaction, and methanethiol (MeSH) was set as the target thiol. The modification of NAM to graphene was first confirmed by attenuated total reflection Fourier transform infrared spectroscopy, and the modification density was 0.5 ± 0.1/nm² through cyclic voltammetry. Owing to a bond exchange, the transfer characteristics of the graphene FET shifted by 2 V to the negative direction after being exposed to MeSH at 10 parts per billion (ppb), equivalent to 0.2 ng, under ultraviolet irradiation. With 5000 ppb of acetic acid, it only shifted 0.7 V. With 1000 ppb of ethanol and 10,000 ppb of methanol, it shifted to the positive direction by 0.4 and 0.6 V, respectively. Because the nontarget molecule showed only a slight response, a thiol-ene chemical reaction was detected. The proposed method can detect the bond-change reaction using an ultralow concentration of MeSH, which indicates that at least 10 ppb (or 0.2 ng) of MeSH was detected by the graphene FET.

Lab-on-Paper Devices for Diagnosis of Human Diseases Using Urine Samples-A Review

In recent years, microfluidic lab-on-paper devices have emerged as a rapid and low-cost alternative to traditional laboratory tests. Additionally, they were widely considered as a promising solution for point-of-care testing (POCT) at home or regions that lack medical infrastructure and resources. This review describes important advances in microfluidic lab-on-paper diagnostics for human health monitoring and disease diagnosis over the past five years. The review commenced by explaining the choice of paper, fabrication methods, and detection techniques to realize microfluidic lab-on-paper devices. Then, the sample pretreatment procedure used to improve the detection performance of lab-on-paper devices was introduced. Furthermore, an in-depth review of lab-on-paper devices for disease measurement based on an analysis of urine samples was presented. The review concludes with the potential challenges that the future development of commercial microfluidic lab-on-paper platforms for human disease detection would face.

Clinical Chemistry for Developing Countries: Mass Spectrometry

Early disease diagnosis is necessary to enable timely interventions. Implementation of this vital task in the developing world is challenging owing to limited resources. Diagnostic approaches developed for resource-limited settings have often involved colorimetric tests (based on immunoassays) due to their low cost. Unfortunately, the performance/sensitivity of such simplistic tests are often limited and significantly hinder opportunities for early disease detection. A new criterion for selecting diagnostic tests in low- and middle-income countries is proposed here that is based on performance-to-cost ratio. For example, modern mass spectrometry (MS) now involves analysis of the native sample in the open laboratory environment, enabling applications in many fields, including clinical research, forensic science, environmental analysis, and agriculture. In this critical review, we summarize recent developments in chemistry that enable MS to be applied effectively in developing countries. In particular, we argue that closed automated analytical systems may not offer the analytical flexibility needed in resource-limited settings. Alternative strategies proposed here have potential to be widely accepted in low- and middle-income countries through the utilization of the open-source ambient MS platform that enables microsampling techniques such as dried blood spot to be coupled with miniature mass spectrometers in a centralized analytical platform. Consequently, costs associated with sample handling and maintenance can be reduced by >50% of the total ownership cost, permitting analytical measurements to be operated at high performance-to-cost ratios in the developing world.

Microsampling: A role to play in Covid-19 diagnosis, surveillance, treatment and clinical trials

The outbreak of the new coronavirus disease changed the world upside down. Every day, millions of people were subjected to diagnostic testing for Covid-19, all over the world. Molecular tests helped in the diagnosis of current infection by detecting the presence of viral genome whereas serological tests helped in detecting the presence of antibody in blood as well as contributed to vaccine development. This testing helped in understanding the immunogenicity, community prevalence, geographical spread and conditions post-infection. However, with the contagious nature of the virus, biological specimen sampling involved the risk of transmission and spread of infection. Clinic or pathology visit was the most concerning part. Trained personnel and resources was another barrier. In this scenario, microsampling played an important role due to its most important advantage of remote, contactless, small volume and self-sampling. Minimum requirements for sample storage and ease of shipment added value in this situation. The highly sensitive instruments and validated assay formats assured the accuracy of results and stability of samples. Microsampling techniques are contributing effectively to the Covid-19 pandemic by reducing the demand for clinical staff in population-level testing. The validated and established applications supported the use of microsampling in diagnosis, therapeutic drug monitoring, development of treatment or vaccines and clinical trials for Covid-19.

Rapid Diagnosis of Prostate Cancer Disease Progression Using Paper Spray Ionization Mass Spectrometry

The limitation of prostate specific antigen (PSA) for prostate cancer (PC) diagnosis is well-recognized. The Gleason score (GS) has been the most widely used grading system for prostate tumor differentiation and represents the best-established prognostic indicator for prostate cancer progression. However, a rapid and sensitive noninvasive diagnostic marker that differentiates GS-based prostate cancer disease progression is needed. As PC is becoming a leading cause of cancer related death for men in the U.S. and worldwide, an immediate need exists for an improved, sensitive, noninvasive, and rapid diagnostic test for PC screening. Here, we employed paper spray ionization-mass spectrometry (PSI MS)-based global metabolomics of urine liquid biopsies to distinguish between healthy (negative for any prostate specific health problems) and progressive PC states (low grade PC such as GS6 and high-grade PC such as GS7, GS8, and GS9). For PSI-MS-based direct untargeted metabolic investigation, a raw urine sample was directly pipetted onto a triangular paper substrate, without any additional sample preparation. Multivariate statistical analysis revealed distinct GS-specific metabolic signatures compared to a healthy control. Variable importance in projection from partial least-squares-discriminant analysis showed distinct metabolic patterns that were correlatively elevated with progressive disease and could serve as biomarkers for diagnosis of prostate cancer risk categorization.

Rapid, in situ detection of chemical warfare agent simulants and hydrolysis products in bulk soils by low-cost 3D-printed cone spray ionization mass spectrometry

Chemical warfare agents (CWAs) are toxic chemicals that have been used as disabling or lethal weapons in war, terrorist attacks, and assasinations. The Chemical Weapons Convention (CWC) has prohibited the use, development, production, and stockpiling of CWAs since its initiation in 1997, however, the threat of deployment still looms. Detection of trace CWAs post-deployment or post-remediation, in bulk matrices such as soil, often requires lengthy sample preparation steps or extensive chromatographic separation times. 3D-printed cone spray ionization (3D-PCSI), an ambient ionization mass spectrometric (MS) technique, provides a rapid, simple, and low-cost method for trace CWA analysis in soil matrices for both in-laboratory and in-field detection. Described here is the utilization of conductive 3D-printed cones to perform both rapid sampling and ionization for CWA simulants and hydrolysis products in eight solid matrices. The analysis of trace quantities of CWA simulants and hydrolysis products by 3D-PCSI-MS coupled to both a commercial benchtop system and a field-portable MS system is detailed. Empirical limits of detection (LOD) for CWA simulants on the benchtop MS ranged from 100 ppt to 750 ppb and were highly dependant on solid matrix composition, with the portable system yielding similar spectral data from alike matrices, albeit with lower sensitivity.

Recent advances in lab-on-paper diagnostic devices using blood samples

Lab-on-paper, or microfluidic paper-based analytical devices (μPADs), use paper as a substrate material, and are patterned with a system of microchannels, reaction zones and sensing elements to perform analysis and detection. The sample transfer in such devices is performed by capillary action. As a result, external driving forces are not required, and hence the size and cost of the device are significantly reduced. Lab-on-paper devices have thus attracted significant attention for point-of-care medical diagnostic purposes in recent years, particularly in less-developed regions of the world lacking medical resources and infrastructures. This review discusses the major advances in lab-on-paper technology for blood analysis and diagnosis in the past five years. The review focuses particularly on the many clinical applications of lab-on-paper devices, including diabetes diagnosis, acute myocardial infarction (AMI) detection, kidney function diagnosis, liver function diagnosis, cholesterol and triglyceride (TG) analysis, sickle-cell disease (SCD) and phenylketonuria (PKU) analysis, virus analysis, C-reactive protein (CRP) analysis, blood ion analysis, cancer factor analysis, and drug analysis. The review commences by introducing the basic transmission principles, fabrication methods, structural characteristics, detection techniques, and sample pretreatment process of modern lab-on-paper devices. A comprehensive review of the most recent applications of lab-on-paper devices to the diagnosis of common human diseases using blood samples is then presented. The review concludes with a brief summary of the main challenges and opportunities facing the lab-on-paper technology field in the coming years.

In vivo solid-phase microextraction swab-mass spectrometry for multidimensional analysis of human saliva

Solid phase microextraction (SPME) is one of the most powerful sample preparation techniques for analyte extraction and enrichment from complex matrices. SPME fibers are commonly used to extract analytes from collected samples. Following our recent work on development of in vivo SPME swab that integrates an SPME fiber and a medical swab (Anal Chim Acta, 2020, 1124, 71-77), the multiple SPME fibers inserted into a medical swab (multiple-SPME swab) is further developed to couple with different mass spectrometry (MS) approaches for multidimensional analysis of human saliva in this work. The new features of cotton ball and SPME fiber of multiple-SPME swab are investigated. Biomarker discovery and disease diagnosis using multiple-SPME swab are also demonstrated. The present study shows that direct coupling multiple-SPME swab with different MS-based approaches could be simple and versatile in vivo method to expand the classes of analytes extracted simultaneously from human saliva.

Low-cost and open-source strategies for chemical separations

In recent years, a trend toward utilizing open access resources for laboratory research has begun. Open-source design strategies for scientific hardware rely upon the use of widely available parts, especially those that can be directly printed using additive manufacturing techniques and electronic components that can be connected to low-cost microcontrollers. Open-source software eliminates the need for expensive commercial licenses and provides the opportunity to design programs for specific needs. In this review, the impact of the "open-source movement" within the field of chemical separations is described, primarily through a comprehensive look at research in this area over the past five years. Topics that are covered include general laboratory equipment, sample preparation techniques, separations-based analysis, detection strategies, electronic system control, and software for data processing. Remaining hurdles and possible opportunities for further adoption of open-source approaches in the context of these separations-related topics are also discussed.

Sample preparation and instrumental methods for illicit drugs in environmental and biological samples: A review

Detection of illicit drugs in the environmental samples has been challenged as the consumption increases globally. Current review examines the recent developments and applications of sample preparation techniques for illicit drugs in solid, liquid, and gas samples. For solid samples, traditional sample preparation methods such as liquid-phase extraction, solid-phase extraction, and the ones with external energy including microwave-assisted, ultrasonic-assisted, and pressurized liquid extraction were commonly used. The sample preparation methods mainly applied for liquid samples were microextraction techniques including solid-phase microextraction, microextraction by packed sorbent, dispersive solid-phase extraction, dispersive liquid-liquid microextraction, hollow fiber-based liquid-phase microextraction, and so on. Capillary microextraction of volatiles and airborne particulate sampling were primarily utilized to extract illicit drugs from gas samples. Besides, the paper introduced recently developed instrumental techniques applied to detect illicit drugs. Liquid chromatograph mass spectrometry and gas chromatograph mass spectrometry were the most widely used methods for illicit drugs samples. In addition, the development of ambient mass spectrometry techniques, such as desorption electrospray ionization mass spectrometry and paper spray mass spectrometry, created potential for rapid in-situ analysis.

Probing the Effects of Heterogeneous Oxidative Modifications on the Stability of Cytochrome c in Solution and in the Gas Phase

Covalent modifications by reactive oxygen species can modulate the function and stability of proteins. Thermal unfolding experiments in solution are a standard tool for probing oxidation-induced stability changes. Complementary to such solution investigations, the stability of electrosprayed protein ions can be assessed in the gas phase by collision-induced unfolding (CIU) and ion-mobility spectrometry. A question that remains to be explored is whether oxidation-induced stability alterations in solution are mirrored by the CIU behavior of gaseous protein ions. Here, we address this question using chloramine-T-oxidized cytochrome c (CT-cyt c) as a model system. CT-cyt c comprises various proteoforms that have undergone MetO formation (+16 Da) and Lys carbonylation (LysCH₂-NH₂ → LysCHO, -1 Da). We found that CT-cyt c in solution was destabilized, with a ∼5 °C reduced melting temperature compared to unmodified controls. Surprisingly, CIU experiments revealed the opposite trend, i.e., a stabilization of CT-cyt c in the gas phase. To pinpoint the source of this effect, we performed proteoform-resolved CIU on CT-cyt c fractions that had been separated by cation exchange chromatography. In this way, it was possible to identify MetO formation at residue 80 as the key modification responsible for stabilization in the gas phase. Possibly, this effect is caused by newly formed contacts of the sulfoxide with aromatic residues in the protein core. Overall, our results demonstrate that oxidative modifications can affect protein stability in solution and in the gas phase very differently.

Accelerated nucleophilic substitution reactions of dansyl chloride with aniline under ambient conditions via dual-tip reactive paper spray

Paper spray ionization (PSI) mass spectrometry (MS) is an emerging tool for ambient reaction monitoring via microdroplet reaction acceleration. PSI-MS was used to accelerate and monitor the time course of the reaction of dansyl chloride with aniline, in acetonitrile, to produce dansyl aniline. Three distinct PSI arrangements were explored in this study representing alternative approaches for sample loading and interaction; conventional single tip as well as two novel setups, a dual-tip and a co-axial arrangement were designed so as to limit any on-paper interaction between reagents. The effect on product abundance was investigated using these different paper configurations as it relates to the time course and distance of microdroplet travel. It was observed that product yield increases at a given distance and then decreases thereafter for all PSI configurations. The fluorescent property of the product (dansyl aniline) was used to visually inspect the reaction progress on the paper substrate during the spraying process. Amongst the variety of sample loading methods the novel dual-tip arrangement showed an increased product yield and microdroplet density, whilst avoiding any on-paper interaction between the reagents.

A review of recent advances in microsampling techniques of biological fluids for therapeutic drug monitoring

Conventional sampling of biological fluids often involves a bulk quantity of samples that are tedious to collect, deliver and process. Miniaturized sampling approaches have emerged as promising tools for sample collection due to numerous advantages such as minute sample size, patient friendliness and ease of shipment. This article reviews the applications and advances of microsampling techniques in therapeutic drug monitoring (TDM), covering the period January 2015 - August 2020. As whole blood is the gold standard sampling matrix for TDM, this article comprehensively highlights the most historical microsampling technique, the dried blood spot (DBS), and its development. Advanced developments of DBS, ranging from various automation DBS, paper spray mass spectrometry (PS-MS), 3D dried blood spheroids and volumetric absorptive paper disc (VAPD) and mini-disc (VAPDmini) are discussed. The volumetric absorptive microsampling (VAMS) approach, which overcomes the hematocrit effect associated with the DBS sample, has been employed in recent TDM. The sample collection and sample preparation details in DBS and VAMS are outlined and summarized. This review also delineates the involvement of other biological fluids (plasma, urine, breast milk and saliva) and their miniaturized dried matrix forms in TDM. Specific features and challenges of each microsampling technique are identified and comparison studies are reviewed.

The current role of mass spectrometry in forensics and future prospects

Mass spectrometry (MS) techniques are highly prevalent in crime laboratories, particularly those coupled to chromatographic separations like gas chromatography (GC) and liquid chromatography (LC). These methods are considered "gold standard" analytical techniques for forensic analysis and have been extensively validated for producing prosecutorial evidentiary data. However, factors such as growing evidence backlogs and problematic evidence types (e.g., novel psychoactive substance (NPS) classes) have exposed limitations of these stalwart techniques. This critical review serves to delineate the current role of MS methods across the broad sub-disciplines of forensic science, providing insight on how governmental steering committees guide their implementation. Novel, developing techniques that seek to broaden applicability and enhance performance will also be highlighted, from unique modifications to traditional hyphenated MS methods to the newer "ambient" MS techniques that show promise for forensic analysis, but need further validation before incorporation into routine forensic workflows. This review also expounds on how recent improvements to MS instrumental design, scan modes, and data processing could cause a paradigm shift in how the future forensic practitioner collects and processes target evidence.

Analysis of biofluids by paper spray-MS in forensic toxicology

Direct ambient ionization techniques have been developed with the aim to reduce the complexity of mass spectrometry analysis by minimizing sample preparation and chromatographic separation. In this context, paper spray-MS (PS-MS) is an innovative approach that provides faster and cheaper analysis of biofluids by the addition of the sample directly to a paper. In forensic toxicology, the analytical workflow for the detection and quantification of drugs of abuse is onerous, including sample treatment, extraction and clean up, especially regarding complex biological matrices. PS-MS allows the detection of analytes of toxicological interest in blood, plasma and urine using low sample volume. This review aims to discuss the potential use, advances and challenges of PS-MS in forensic toxicology.

Analysis of non-conjugated steroids in water using paper spray mass spectrometry

A novel strategy for the direct analysis of non-conjugated steroids in water using paper spray mass spectrometry (PS-MS) has been developed. PS-MS was used in the identification and quantification of non-conjugated (free) steroids in fish tank water samples. Data shown herein indicates that individual amounts of free steroids can be detected in aqua as low as; 0.17 ng/µL, 0.039 ng/µL, 0.43 ng/µL, 0.0076 ng/µL for aldosterone, corticosterone, cortisol, and β-estrone, respectively, and with an average relative standard deviation of ca. < 10% in the positive ion mode using PS-MS/MS. Direct detection of free steroids in a raw water mixture, from aquaculture, without prior sample preparation is demonstrated. The presence of free steroids released in fish water samples was confirmed via tandem mass spectrometry using collision-induced dissociation. This approach shows promise for rapid and direct water quality monitoring to provide a holistic assessment of non-conjugated steroids in aqua.

Direct Analysis of Doping Agents in Raw Urine Using Hydrophobic Paper Spray Mass Spectrometry

In this study, the direct analysis of doping agents in urine samples with no sample preparation by a modified paper spray mass spectrometry (PS-MS) methodology has been demonstrated for the first time. We have described a paper surface treatment with trichloromethylsilane using a gas-phase reaction to increase the ionization of target compounds. This approach was applied for the analysis of two classes of banned substances in urine samples: anabolic agents (trenbolone and clenbuterol) and diuretics (furosemide and hydrochlorothiazide). Under optimized conditions, the developed methods presented satisfactory repeatability, and an analysis of variance showed linearity without lack-of-fit. Highly sensitive detections as low as sub-nanogram per milliliter levels, which is below the minimum required performance levels proposed by the World Anti-Doping Agency, have been reached using the hydrophobic PS-MS analysis without any preconcentration and cleanup step.

Schirmer Paper Noninvasive Microsampling for Direct Mass Spectrometry Analysis of Human Tears

Rapid and sensitive detection of metabolites and chemical residues in human tears is highly beneficial for understanding eye health. In this study, Schirmer paper was used for noninvasive microsampling of human tears, and then paper spray mass spectrometry (PSMS) was performed for direct analysis of human tears. Schirmer PSMS was successfully used for rapid diagnosis of dry-eye syndrome by detecting the volume and metabolites of human tears. Drugs of abuse, therapeutic drugs, and pharmacodynamics in human tears were also investigated by Schirmer PSMS. Furthermore, specific markers of environmental exposures in the air to human eyes, including volatile organic compounds, aerosol, and smoke, were unambiguously sampled and detected in human tears using Schirmer PSMS. Excellent analytical performances were achieved, including single-use, low-sample consumption (1.0 μL), rapid analysis (the whole analytical procedure completed within 3 min), high sensitivity (absolute limit of detection less than or equal to 0.5 pg, signal-to-noise ratio greater than or equal to 3), good reproducibility (relative standard deviation less than 10%, n = 3), and accurate quantitation (average deviation less than 3%, n = 3). Overall, our results showed that Schirmer PSMS is a highly effective method for direct tear analysis and is expected to be a convenient tool for human tear analysis in significant clinical applications.