A method for the determination of acrylamide in bakery products using ion trap LC-ESI-MS/MS

Temperature dependent autocleavage and applications of recombinant L-asparaginase from Thermococcus kodakarensis for acrylamide mitigation

This manuscript describes enhancement of soluble production, auto-cleavage analysis and assessment of acrylamide mitigation potential of Tk2246, a plant-type L-asparaginase from Thermococcus kodakarensis. The gene encoding Tk2246 was cloned and expressed in Escherichia coli. Recombinant Tk2246 was produced mainly in insoluble form. Various strategies were utilized to enhance the soluble production, which significantly increased the soluble yield. Interestingly, recombinant Tk2246 was produced even without addition of the inducer, though relatively in a lower amount. To our surprise, Tk2246 was produced in partially cleaved form when the inducer was not added in the culture. When applied for acrylamide mitigation, Tk2246 reduced the acrylamide formation more than 80% in French fries, chapati and yeast-leavened bread. In addition to acrylamide mitigation, Tk2246 exhibited antistaling activity without loss of sensory properties of the food. High activity, thermostability and efficient acrylamide reduction capability make Tk2246 a potential candidate for industrial applications.

Acrylamide in Bakery Products: A Review on Health Risks, Legal Regulations and Strategies to Reduce Its Formation

Acrylamide is a contaminant as defined in Council Regulation (EEC) No 315/93 and as such, it is considered a chemical hazard in the food chain. The toxicity of acrylamide has been acknowledged since 2002, among its toxicological effects on humans being neurotoxicity, genotoxicity, carcinogenicity, and reproductive toxicity. Acrylamide has been classified as carcinogenic in the 2A group, with human exposure leading to progressive degeneration of the peripheral and central nervous systems characterized by cognitive and motor abnormalities. Bakery products (bread, crispbread, cakes, batter, breakfast cereals, biscuits, pies, etc.) are some of the major sources of dietary acrylamide. The review focuses on the levels of acrylamide in foods products, in particular bakery ones, and the risk that resulting dietary intake of acrylamide has on human health. The evolving legislative situation regarding the acrylamide content from foodstuffs, especially bakery ones, in the European Union is discussed underlining different measures that food producers must take in order to comply with the current regulations regarding the acrylamide levels in their products. Different approaches to reduce the acrylamide level in bakery products such as the use of asparginase, calcium salts, antioxidants, acids and their salts, etc., are described in detail.

The effect of the stale bread flour addition on flour and bread quality

In this study, the effect of the flour, which was obtained from stale bread, on flour and bread quality was investigated. The bread that was staled at refrigerator for 7 days was prepared as whole and crumb, and was grinded to convert into flour. The staled whole and crumb bread flours were stored at −18 °C and used to replace 0, 15, 30 and 45% of wheat flour. Then microbiological and physicochemical properties of flours; physical, textural and sensory properties of bread obtained from these composite flours were investigated. We concluded that stale bread flour could be used for bread production at the level of 15%. If the total bread production and consumption is considered, this addition level could provide a significant amount of waste bread recycling each year.

Determination of Acrylamide in Biscuits by High-Resolution Orbitrap Mass Spectrometry: A Novel Application

Acrylamide (AA), a molecule which potentially increases the risk of developing cancer, is easily formed in food rich in carbohydrates, such as biscuits, wafers, and breakfast cereals, at temperatures above 120 °C. Thus, the need to detect and quantify the AA content in processed foodstuffs is eminent, in order to delineate the limits and mitigation strategies. This work reports the development and validation of a high-resolution mass spectrometry-based methodology for identification and quantification of AA in specific food matrices of biscuits, by using LC-MS with electrospray ionization and Orbitrap as the mass analyser. The developed analytical method showed good repeatability (RSDr 11.1%) and 3.55 and 11.8 μg kg-1 as limit of detection (LOD) and limit of quantification (LOQ), respectively. The choice of multiplexed targeted-SIM mode (t-SIM) for AA and AA-d3 isolated ions provided enhanced detection sensitivity, as demonstrated in this work. Statistical processing of data was performed in order to compare the AA levels with several production parameters, such as time/cooking temperature, placement on the cooking conveyor belt, color, and moisture for different biscuits. The composition of the raw materials was statistically the most correlated factor with the AA content when all samples are considered. The statistical treatment presented herein enables an important prediction of factors influencing AA formation in biscuits contributing to putting in place effective mitigation strategies.

Sol-gel hybrid methyltrimethoxysilane-tetraethoxysilane as a new dispersive solid-phase extraction material for acrylamide determination in food with direct gas chromatography-mass spectrometry analysis

A sol-gel hybrid sorbent, methyltrimethoxysilane-tetraethoxysilane (MTMOS-TEOS) was successfully used as new dispersive solid phase extraction (dSPE) sorbent material in the determination of acrylamide in several Sudanese foods and analysis using GC-MS. Several important dSPE parameters were optimised. Under the optimised conditions, excellent linearity (r(2)>0.9998) was achieved using matrix matched standard calibration in the concentration range 50-1000 μg kg(-1). The limits of detection (LOD) and limit of quantification ranged from 9.1 to 12.8 μg/kg and 27.8-38.9 μg/kg, respectively. The precision (RSD%) of the method was ⩽6.6% and recoveries of acrylamide obtained were in the range of 88-103%, (n=3). The LOD obtained is comparable with the LODs of primary secondary amine dSPE. The proposed MTMOS-TEOS dSPE method is direct and safe for acrylamide analysis, showed reliable method validation performances and good cleanup effects. It was successfully applied to the analysis of acrylamide in real food samples.

Ultra trace level determinations of acrylamide in surface and drinking water by GC-MS after derivatization with xanthydrol

A sensitive GC-MS method has been established for the determination of acrylamide in surface and drinking water based on derivatization with xanthydrol. Deuterated acrylamide (acrylamide-d3 ) was chosen as the internal standard for analyzing the water sample. The derivatization of acrylamide was performed directly in water, and the best reaction conditions (xanthydrol of 1.6 mM, HCl concentration of 0.05 M, reaction for 30 min at ambient temperature) were established by variation of parameters. Under the established conditions, the detection and quantification limits were 3.0 and 9.7 ng/L, respectively, and the interday RSD was less than 8% at concentrations of 20 and 100 ng/L.

Acrylamide formation in almonds (Prunus dulcis): influences of roasting time and temperature, precursors, varietal selection, and storage

Acrylamide is a probable human carcinogen that is found in many roasted and baked foods. This paper describes two sensitive and reliable LC-(ESI)MS/MS methods for the analysis of (1) acrylamide and (2) common acrylamide precursors (i.e., glucose, fructose, asparagine, and glutamine) in raw and roasted almonds. These methods were used to evaluate the impact of roasting temperatures (between 129 and 182 °C) and times on acrylamide formation. Controlling the roasting temperature at or below 146 °C resulted in acrylamide levels below 200 ppb at all roasting times evaluated. Six varieties of almonds collected in various regions of California over two harvest years and roasted at 138 °C for 22 min had acrylamide levels ranging from 117 ± 5 μg/kg (Sonora) to 221 ± 95 μg/kg (Butte) with an average of 187 ± 71 μg/kg. A weak correlation between asparagine content in raw almonds and acrylamide formation was observed (R(2) = 0.6787). No statistical relationship was found between acrylamide formation and almond variety, orchard region, or harvest year. Stability studies on roasted almonds indicated that acrylamide levels decreased by 12.9-68.5% (average of 50.2%) after 3 days of storage at 60 °C. Short-term elevated temperature storage may be another approach for mitigating acrylamide levels in roasted almonds.

Review of methods for the reduction of dietary content and toxicity of acrylamide

Potentially toxic acrylamide is largely derived from heat-induced reactions between the amino group of the free amino acid asparagine and carbonyl groups of glucose and fructose in cereals, potatoes, and other plant-derived foods. This overview surveys and consolidates the following dietary aspects of acrylamide: distribution in food originating from different sources; consumption by diverse populations; reduction of the acrylamide content in the diet; and suppression of adverse effects in vivo. Methods to reduce adverse effects of dietary acrylamide include (a) selecting potato, cereal, and other plant varieties for dietary use that contain low levels of the acrylamide precursors, namely, asparagine and glucose; (b) removing precursors before processing; (c) using the enzyme asparaginase to hydrolyze asparagine to aspartic acid; (d) selecting processing conditions (pH, temperature, time, processing and storage atmosphere) that minimize acrylamide formation; (e) adding food ingredients (acidulants, amino acids, antioxidants, nonreducing carbohydrates, chitosan, garlic compounds, protein hydrolysates, proteins, metal salts) that have been reported to prevent acrylamide formation; (f) removing/trapping acrylamide after it is formed with the aid of chromatography, evaporation, polymerization, or reaction with other food ingredients; and (g) reducing in vivo toxicity. Research needs are suggested that may further facilitate reducing the acrylamide burden of the diet. Researchers are challenged to (a) apply the available methods and to minimize the acrylamide content of the diet without adversely affecting the nutritional quality, safety, and sensory attributes, including color and flavor, while maintaining consumer acceptance; and (b) educate commercial and home food processors and the public about available approaches to mitigating undesirable effects of dietary acrylamide.

A theoretical investigation on the geometry and vibrational spectra of 10,10,2,6,5-pentamethyl-1-hydroxychroman: a model of alpha-tocopherol

In the present study, density functional theory calculations with the combined Becke's three-parameter exchange functional in combination with the Lee, Yang, and Parr correlation functional (B3LYP) exchange-correlation energy functions were performed by using the 6-311G** basis set to study the structure and vibrational spectra of 10,10,2,6,5-pentamethyl-1-hydroxychroman (a model of alpha-tocopherol). The fully optimized geometry of the molecule was found to be very consistent with the X-ray crystal structure. The predicted vibrational frequencies made it possible to give a reliable assignment of the IR spectrum of the molecule according to the potential energy distributions (PEDs).

Analysis of Acrylamide in Water Using a Coevaporation Preparative Step and Isotope Dilution Liquid Chromatography Tandem Mass Spectrometry

Acrylamide is a probable human carcinogen, and the drinking water quality guideline for this compound is 0.5 mg/L. However, analysis of this compound in water is difficult because of its very high water solubility, which limits the efficiency of sample preconcentration prior to analysis. We developed a robust and sensitive analytical method for the determination of trace quantities of acrylamide in samples of water using a novel preparative technique and isotope dilution liquid chromatography tandem mass spectrometry with atmospheric pressure chemical ionization as the ion source (LC-APCI-MS/MS). The preparative method involves coevaporation of acrylamide with water at pH 10 using a rotary evaporator, followed by acidification to pH 3.0 and concentration of the sample prior to analysis by LC-APCI-MS/MS. To compensate for the loss of the analyte during sample preparation and signal suppression due to interference from the sample matrix, isotope dilution with acrylamide-d3 was used for quantitation. Using this method, analyte recoveries ranged from 74 to 103% for acrylamide spiked into water at a concentration of 0.4 ng/mL. The limit of detection and limit of quantification (LOQ) for acrylamide in water were 0.02 and 0.06 ng/mL, respectively. This method was successfully applied to determine trace levels of acrylamide in samples of river water and in runoff from an agricultural field to which municipal biosolids (i.e., sludge) had been applied. Concentrations of acrylamide in these samples ranged from <LOQ to 0.16 microg/L.

Influence of agronomic factors and extraction rate on the acrylamide contents in yeast-leavened breads

Because the impact of agronomical factors on bakery products quality is still an insufficiently studied field, acrylamide contents of breads produced from flours of nine wheat, two rye, and two spelt varieties harvested in 2003 and 2004 were investigated. It could be demonstrated that acrylamide content in bread strongly depends on the cultivar, with extremes differing by a factor of 5.4 due to marked differences in free asparagine and crude protein contents. Nitrogen fertilization also resulted in elevated amino acid and protein contents, thus increasing acrylamide levels from 10.6 to 55.6 mug/kg. Independent of fertilization, harvest year turned out to be another factor influencing acrylamide formation. Breads produced from 2003 flours showed significantly higher acrylamide contents than those of 2004, which was ascribed to favorable light and temperature conditions during the cultivation period, thus enhancing amino acid and protein contents. Sprouting of the grain also resulted in significantly higher acrylamide levels, which was attributed to elevated enzyme activities and the formation of precursors from protein and starch. Furthermore, bakery products made from flours with higher extraction rates were shown to contain higher acrylamide levels resulting from extracted free asparagine and protein from the aleuron layers of the cereal grain.

Pyrolytic acrylamide formation from purified wheat gluten and gluten-supplemented wheat bread rolls

Recent studies have revealed different acrylamide formation mechanisms, e. g. from carnosine (N-beta-alanyl-L-histidine) and aminopropionamide as additional precursors. The occurrence of acrylamide in food matrices devoid of common precursors such as meat supports an additional formation pathway. Gluten was recovered from wheat flour by water extraction. Starch, reducing sugars and amino acids were removed using alpha-amylase and NaCl solution and were completely absent in the purified gluten fraction. The gluten was dry heated at temperatures ranging from 160 to 240 degrees C for 8 to 12 min and analyzed for acrylamide and cinnamic amide using liquid chromatography-tandem mass spectrometry. Acrylamide could be detected up to 3997 microg/kg gluten dry weight. Cinnamic amide was detected and unambiguously identified in the gluten samples, thus confirming the proposed formation of acrylamide from proteins. After gluten addition to bread roll dough, protein pyrolysis to form acrylamide in the complex food matrix was assessed. Contents of asparagine and reducing sugars were diminished due to the addition of the gluten. In contrast to the expectation with respect to the well-established common formation mechanism of acrylamide, it increased from 53.4 to 63.9 microg/kg (+20%), which was in good correlation with the higher proportion of gluten. As demonstrated by the t-test, the increase in acrylamide was significant when comparing 0 and 15% gluten addition. Additionally, cinnamic amide could be found in crusts of bread rolls. Thus, evidence for pyrolytic formation of acrylamide from wheat gluten was provided.