MR microscopy of lung airways with hyperpolarized 3He

Highly and Adaptively Undersampling Pattern for Pulmonary Hyperpolarized 129Xe Dynamic MRI

Hyperpolarized (HP) gas (e.g., ³He or ¹²⁹Xe) dynamic MRI could visualize the lung ventilation process, which provides characteristics regarding lung physiology and pathophysiology. Compressed sensing (CS) is generally used to increase the temporal resolution of such dynamic MRI. Nevertheless, the acceleration factor of CS is constant, which results in difficulties in precisely observing and/or measuring dynamic ventilation process due to bifurcating network structure of the lung. Here, an adaptive strategy is proposed to highly undersample pulmonary HP dynamic k-space data, according to the characteristics of both lung structure and gas motion. After that, a valid reconstruction algorithm is developed to reconstruct dynamic MR images, considering the low-rank, global sparsity, gas-inflow effects, and joint sparsity. Both the simulation and the in vivo results verify that the proposed approach outperforms the state-of-the-art methods both in qualitative and quantitative comparisons. In particular, the proposed method acquires 33 frames within 6.67 s (more than double the temporal resolution of the recently proposed strategy), and achieves high-image quality [the improvements are 29.63%, 3.19%, 2.08%, and 13.03% regarding the mean absolute error (MAE), structural similarity index (SSIM), quality index based on local variance (QILV), and contrast-to-noise ratio (CNR) comparisons]. This provides accurate structural and functional information for early detection of obstructive lung diseases.

A portable ventilator with integrated physiologic monitoring for hyperpolarized 129Xe MRI in rodents

Hyperpolarized (HP) ¹²⁹Xe MRI is emerging as a powerful, non-invasive method to image lung function and is beginning to find clinical application across a range of conditions. As clinical implementation progresses, it becomes important to translate back to well-defined animal models, where novel disease signatures can be characterized longitudinally and validated against histology. To date, preclinical ¹²⁹Xe MRI has been limited to only a few sites worldwide with 2D imaging that is not generally sufficient to fully capture the heterogeneity of lung disease. To address these limitations and facilitate broader dissemination, we report on a compact and portable HP gas ventilator that integrates all the gas-delivery and physiologic monitoring capabilities required for high-resolution 3D hyperpolarized ¹²⁹Xe imaging. This ventilator is MR- and HP-gas compatible, driven by inexpensive microcontrollers and open source code, and allows for precise control of the tidal volume and breathing cycle in perorally intubated mice and rats. We use the system to demonstrate data acquisition over multiple breath-holds, during which lung motion is suspended to enable high-resolution 3D imaging of gas-phase and dissolved-phase ¹²⁹Xe in the lungs. We demonstrate the portability and versatility of the ventilator by imaging a mouse model of lung cancer longitudinally at 2 Tesla, and a healthy rat at 7 Tesla. We also report the detection of subtle spectroscopic fluctuations in phase with the heart rate, superimposed onto larger variations stemming from the respiratory cycle. This ventilator was developed to facilitate duplication and gain broad adoption to accelerate preclinical ¹²⁹Xe MRI research.

Considering low-rank, sparse and gas-inflow effects constraints for accelerated pulmonary dynamic hyperpolarized 129Xe MRI

Dynamic hyperpolarized (HP) ¹²⁹Xe MRI is able to visualize the process of lung ventilation, which potentially provides unique information about lung physiology and pathophysiology. However, the longitudinal magnetization of HP ¹²⁹Xe is nonrenewable, making it difficult to achieve high image quality while maintaining high temporal-spatial resolution in the pulmonary dynamic MRI. In this paper, we propose a new accelerated dynamic HP ¹²⁹Xe MRI scheme incorporating the low-rank, sparse and gas-inflow effects (L + S + G) constraints. According to the gas-inflow effects of HP gas during the lung inspiratory process, a variable-flip-angle (VFA) strategy is designed to compensate for the rapid attenuation of the magnetization. After undersampling k-space data, an effective reconstruction algorithm considering the low-rank, sparse and gas-inflow effects constraints is developed to reconstruct dynamic MR images. In this way, the temporal and spatial resolution of dynamic MR images is improved and the artifacts are lessened. Simulation and in vivo experiments implemented on the phantom and healthy volunteers demonstrate that the proposed method is not only feasible and effective to compensate for the decay of the magnetization, but also has a significant improvement compared with the conventional reconstruction algorithms (P-values are less than 0.05). This confirms the superior performance of the proposed designs and their ability to maintain high quality and temporal-spatial resolution.

Optically polarized 3He

This article reviews the physics and technology of producing large quantities of highly spin-polarized 3He nuclei using spin-exchange (SEOP) and metastability-exchange (MEOP) optical pumping. Both technical developments and deeper understanding of the physical processes involved have led to substantial improvements in the capabilities of both methods. For SEOP, the use of spectrally narrowed lasers and K-Rb mixtures has substantially increased the achievable polarization and polarizing rate. For MEOP nearly lossless compression allows for rapid production of polarized 3He and operation in high magnetic fields has likewise significantly increased the pressure at which this method can be performed, and revealed new phenomena. Both methods have benefitted from development of storage methods that allow for spin-relaxation times of hundreds of hours, and specialized precision methods for polarimetry. SEOP and MEOP are now widely applied for spin-polarized targets, neutron spin filters, magnetic resonance imaging, and precision measurements.

Diffusion lung imaging with hyperpolarized gas MRI

Lung imaging using conventional 1 H MRI presents great challenges because of the low density of lung tissue, lung motion and very fast lung tissue transverse relaxation (typical T2 * is about 1-2 ms). MRI with hyperpolarized gases (3 He and 129 Xe) provides a valuable alternative because of the very strong signal originating from inhaled gas residing in the lung airspaces and relatively slow gas T2 * relaxation (typical T2 * is about 20-30 ms). However, in vivo human experiments should be performed very rapidly - usually during a single breath-hold. In this review, we describe the recent developments in diffusion lung MRI with hyperpolarized gases. We show that a combination of the results of modeling of gas diffusion in lung airspaces and diffusion measurements with variable diffusion-sensitizing gradients allows the extraction of quantitative information on the lung microstructure at the alveolar level. From an MRI scan of less than 15 s, this approach, called in vivo lung morphometry, allows the provision of quantitative values and spatial distributions of the same physiological parameters as measured by means of 'standard' invasive stereology (mean linear intercept, surface-to-volume ratio, density of alveoli, etc.). In addition, the approach makes it possible to evaluate some advanced Weibel parameters characterizing lung microstructure: average radii of alveolar sacs and ducts, as well as the depth of their alveolar sleeves. Such measurements, providing in vivo information on the integrity of pulmonary acinar airways and their changes in different diseases, are of great importance and interest to a broad range of physiologists and clinicians. We also discuss a new type of experiment based on the in vivo lung morphometry technique combined with quantitative computed tomography measurements, as well as with gradient echo MRI measurements of hyperpolarized gas transverse relaxation in the lung airspaces. Such experiments provide additional information on the blood vessel volume fraction, specific gas volume and length of the acinar airways, and allow the evaluation of lung parenchymal and non-parenchymal tissue. Copyright © 2015 John Wiley & Sons, Ltd.

Three-dimensional echo-planar cine imaging of cerebral blood supply using arterial spin labeling

OBJECTIVE

Echo-planar imaging (EPI) with CYlindrical Center-out spatiaL Encoding (EPICYCLE) is introduced as a novel hybrid three-dimensional (3D) EPI technique. Its suitability for the tracking of a short bolus created by pseudo-continuous arterial spin labeling (pCASL) through the cerebral vasculature is demonstrated.

MATERIALS AND METHODS

EPICYCLE acquires two-dimensional planes of k-space along center-out trajectories. These "spokes" are rotated from shot to shot about a common axis to encode a k-space cylinder. To track a bolus of labeled blood, the same subset of evenly distributed spokes is acquired in a cine fashion after a short period of pCASL. This process is repeated for all subsets to fill the whole 3D k-space of each time frame.

RESULTS

The passage of short pCASL boluses through the vasculature of a 3D imaging slab was successfully imaged using EPICYCLE. By choosing suitable sequence parameters, the impact of slab excitation on the bolus shape could be minimized. Parametric maps of signal amplitude, transit time, and bolus width reflected typical features of blood transport in large vessels.

CONCLUSION

The EPICYCLE technique was successfully applied to track a short bolus of labeled arterial blood during its passage through the cerebral vasculature.

Probing lung microstructure with hyperpolarized noble gas diffusion MRI: theoretical models and experimental results

The introduction of hyperpolarized gases ((3)He and (129)Xe) has opened the door to applications for which gaseous agents are uniquely suited-lung MRI. One of the pulmonary applications, diffusion MRI, relies on measuring Brownian motion of inhaled hyperpolarized gas atoms diffusing in lung airspaces. In this article we provide an overview of the theoretical ideas behind hyperpolarized gas diffusion MRI and the results obtained over the decade-long research. We describe a simple technique based on measuring gas apparent diffusion coefficient (ADC) and an advanced technique, in vivo lung morphometry, that quantifies lung microstructure both in terms of Weibel parameters (acinar airways radii and alveolar depth) and standard metrics (mean linear intercept, surface-to-volume ratio, and alveolar density) that are widely used by lung researchers but were previously available only from invasive lung biopsy. This technique has the ability to provide unique three-dimensional tomographic information on lung microstructure from a less than 15 s MRI scan with results that are in good agreement with direct histological measurements. These safe and sensitive diffusion measurements improve our understanding of lung structure and functioning in health and disease, providing a platform for monitoring the efficacy of therapeutic interventions in clinical trials.

Biomedical imaging with hyperpolarized noble gases

Hyperpolarized noble gases (HNGs), polarized to approximately 50% or higher, have led to major advances in magnetic resonance (MR) imaging of porous structures and air-filled cavities in human subjects, particularly the lung. By boosting the available signal to a level about 100 000 times higher than that at thermal equilibrium, air spaces that would otherwise appear as signal voids in an MR image can be revealed for structural and functional assessments. This review discusses how HNG MR imaging differs from conventional proton MR imaging, how MR pulse sequence design is affected and how the properties of gas imaging can be exploited to obtain hitherto inaccessible information in humans and animals. Current and possible future imaging techniques, and their application in the assessment of normal lung function as well as certain lung diseases, are described.

Interdependence of in-cell xenon density and temperature during Rb/129Xe spin-exchange optical pumping using VHG-narrowed laser diode arrays

The (129)Xe nuclear spin polarization (P(Xe)) that can be achieved via spin-exchange optical pumping (SEOP) is typically limited at high in-cell xenon densities ([Xe](cell)), due primarily to corresponding reductions in the alkali metal electron spin polarization (e.g. P(Rb)) caused by increased non-spin-conserving Rb-Xe collisions. While demonstrating the utility of volume holographic grating (VHG)-narrowed lasers for Rb/(129)Xe SEOP, we recently reported [P. Nikolaou et al., JMR 197 (2009) 249] an anomalous dependence of the observed P(Xe) on the in-cell xenon partial pressure (p(Xe)), wherein P(Xe) values were abnormally low at decreased p(Xe), peaked at moderate p(Xe) (~300 torr), and remained surprisingly elevated at relatively high p(Xe) values (>1000 torr). Using in situ low-field (129)Xe NMR, it is shown that the above effects result from an unexpected, inverse relationship between the xenon partial pressure and the optimal cell temperature (T(OPT)) for Rb/(129)Xe SEOP. This interdependence appears to result directly from changes in the efficiency of one or more components of the Rb/(129)Xe SEOP process, and can be exploited to achieve improved P(Xe) with relatively high xenon densities measured at high field (including averaged P(Xe) values of ~52%, ~31%, ~22%, and ~11% at 50, 300, 500, and 2000 torr, respectively).

Application of Magnetic Resonance (MR) Imaging for the Development and Validation of Computational Fluid Dynamic (CFD) Models of the Rat Respiratory System

Computational fluid dynamic (CFD) models of the respiratory system provide a quantitative basis for extrapolating the localized dose of inhaled materials and improving human health risk assessments based upon inhalation studies conducted in animals. Nevertheless, model development and validation have historically been tedious and time-consuming tasks. In recognition of this, we previously reported on the use of proton (1H) magnetic resonance (MR) imaging for visualizing nasal-sinus passages in the rat, and for speeding computational mesh generation. Here, the generation and refinement of meshes for rat nasal airways are described in more detail and simulated airflows are presented. To extend the CFD models to the complete respiratory tract, three-dimensional (3D) 1H MR imaging of rat pulmonary casts was also utilized to construct pulmonary airway meshes using procedures developed for the nasal airways. Furthermore, the feasibility of validating CFD predictions with MR was tested by imaging hyperpolarized 3He gas at physiological flow rates in a straight pipe with a diameter comparable to the rat trachea. Results from these diverse studies highlight the potential utility of MR imaging not only for speeding CFD development but also possibly for model validation.

Effects of ozone exposure in rat lungs investigated with hyperpolarized 3 He MRI

PURPOSE

To investigate the effects of subchronic ozone exposure on rat lung ventilation using hyperpolarized (HP) (3)He MRI.

MATERIALS AND METHODS

A total of 24 Sprague-Dawley rats, distributed in one control group and four groups exposed to 0.5 ppm ozone concentration for two days or six days, either continuously (22 hours/day) or alternatingly (12 hours/day). A three-step MRI protocol was designed and applied to each animal, including: 1) (3)He gas distribution images acquired at inspiratory capacity, 2) measurements of intrapulmonary (3)He diffusion coefficients, and 3) dynamic ventilation acquisitions performed during lung filling with (3)He.

RESULTS

No differentiation between animals exposed to ozone and control animals was observed from the ventilation images obtained at inspiratory capacity. The (3)He diffusion coefficients were not statistically different from one group to another. Ventilation defects, appearing as delayed lung filling regions and heterogeneous lung filling, were observed in the dynamic lung ventilation image series. The percentage of animals with ventilation defects in the control, two-day, and six-day exposed groups were equal to 20%, 43% and 75%, respectively. In the subgroup of the animals exposed six days for 12 hours per day, the percentage of animals exhibiting ventilation defects was equal to 85%.

CONCLUSION

Heterogeneous obstructive patterns in an experimental animal model of subchronic ozone exposure were observed using HP (3)He MRI.

Investigation of hyperpolarized 3He magnetic resonance imaging utility in examining human airway diameter behavior in asthma through comparison with high-resolution computed tomography

RATIONALE AND OBJECTIVES

Application of a previously developed model-based algorithm on hyperpolarized (HP) (3)He magnetic resonance (MR) dynamic projection images of phantoms was extended to investigate the utility of HP (3)He MR imaging (MRI) in quantifying airway caliber changes associated with asthma.

MATERIALS AND METHODS

Airways of seven volunteers were imaged and measured using HP (3)He MRI and multidetector-row computed tomography (MDCT) before and after a methacholine (MCh) challenge. MDCT data were obtained at functional residual capacity and 1 L above functional residual capacity.

RESULTS

Comparison of the resultant data showed that HP (3)He MRI did not match MDCT in measuring the ratios of airway calibers before and after the MCh challenge in 37% to 43% of the airways from the first six generations at the two lung volumes tested. However, MDCT did yield the observation that 49% to 69% of these airways displayed bronchodilation following MCh challenge.

CONCLUSION

The current implementation of HP (3)He MRI did not match the MCh-induced postchallenge-to-prechallenge airway caliber ratios as measured with MDCT. Elevated parenchymal tethering due to bronchoconstriction-induced hyperinflation was proposed as a possible explanation for this airway dilation.

Comparison of airway diameter measurements from an anthropomorphic airway tree phantom using hyperpolarized 3He MRI and high-resolution computed tomography

An anthropomorphic airway tree phantom was imaged with both hyperpolarized (HP) 3He MRI using a dynamic projection scan and computed tomography (CT). Airway diameter measurements from the HP 3He MR images obtained using a newly developed model-based algorithm were compared against their corresponding CT values quantified with a well-established method. Of the 45 airway segments that could be evaluated with CT, only 14 airway segments (31%) could be evaluated using HP 3He MRI. No airway segments smaller than approximately 4 mm in diameter and distal to the fourth generation were adequate for analysis in MRI. For the 14 airway segments measured, only two airway segments yielded a non-equivalent comparison between the two imaging modalities, while eight more had inconclusive comparison results, leaving only four airway segments (29%) that satisfied the designed equivalence criteria. Some of the potential problems in airway diameter quantification described in the formulation of the model-based algorithm were observed in this study. These results suggest that dynamic projection HP 3He MRI may have limited utility for measuring airway segment diameters, particularly those of the central airways.

Basics concepts and clinical applications of oxygen-enhanced MR imaging

Oxygen-enhanced MR imaging is a new technique, and its physiological significance has not yet been fully elucidated. This review article covers (1) the theory of oxygen enhancement and its relationship with respiratory physiology; (2) design for oxygen-enhanced MR imaging sequencing; (3) a basic study of oxygen-enhanced MR imaging in animal models and humans; (4) a clinical study of oxygen-enhanced MR imaging; and (5) a comparison of advantages and disadvantages of this technique with those of hyperpolarized noble gas MR ventilation imaging. Oxygen-enhanced MR imaging provides not only the ventilation-related, but also respiration-related information. Oxygen-enhanced MR imaging has the potential to replace nuclear medicine studies for the identification of regional pulmonary function, and many investigators are now attempting to adapt this technique for routine clinical studies. We believe that further basic studies as well as clinical applications of this new technique will define the real significance of oxygen-enhanced MR imaging for the future of pulmonary functional imaging and its usefulness for diagnostic radiology and pulmonary medicine.

Retrospective cine 3He ventilation imaging under spontaneous breathing conditions: a non-invasive protocol for small-animal lung function imaging

A non-invasive and free-breathing hyperpolarized (HP) (3)He imaging protocol for small animals was implemented and validated on rats for lung function imaging. Animals were allowed to breathe a mixture of air and (3)He from a mask and a gas reservoir fitted to their heads. Radial imaging sequences were used, and MRI signal intensity changes were monitored for retrospective cine image reconstruction. The ventilation cycle of the animals was imaged with a 100 ms temporal resolution. The sliding window imaging technique was applied to reconstruct 5 ms time-shifted image series covering the complete breathing cycle. Image series were processed to extract quantitative ventilation parameters such as the gas arrival time. The reproducibility and the non-invasiveness of this ventilation imaging protocol were evaluated by multiple acquisitions on the same animals.

Proton MRI as a noninvasive tool to assess elastase-induced lung damage in spontaneously breathing rats

Elastase-induced changes in lung morphology and function were detected in spontaneously breathing rats using conventional proton MRI at 4.7 T. A single dose of porcine pancreatic elastase (75 U/100 g body weight) or vehicle (saline) was administered intratracheally (i.t.) to male Brown Norway (BN) rats. MRI fluid signals were detected in the lungs 24 hr after administration of elastase and resolved within 2 weeks. These results correlated with perivascular edema and cellular infiltration observed histologically. Reductions in MRI signal intensity of the lung parenchyma, and increases in lung volume were detected as early as 2 weeks following elastase administration and remained uniform throughout the study, which lasted 8 weeks. Observations were consistent with air trapping resulting from emphysema detected histologically. In a separate experiment, animals were treated daily intraperitoneally (i.p.) with all-trans-retinoic acid (ATRA; 500 microg/kg body weight) or its vehicle (triglyceride oil) starting on day 21 after elastase administration and continuing for 12 days. Under these conditions, ATRA did not elicit a reversal of elastase-induced lung damage as measured by MRI and histology. The present approach complements other validated applications of proton MRI in experimental lung research as a method for assessing drugs in rat models of respiratory diseases.

Measurement of the internal diameter of plastic tubes from projection MR images using a model-based least-squares fit approach

Hyperpolarized (HP) 3He MRI is an emerging tool in the diagnosis and evaluation of pulmonary diseases involving bronchoconstriction, such as asthma. Previously, airway diameters from dynamic HP 3He MR images of the lung were assessed manually and subjectively, and were thus prone to uncertainties associated with human error and partial volume effects. A model-based algorithm capable of fully utilizing pixel intensity profile information and attaining subpixel resolution has been developed to measure surrogate airway diameters from HP 3He MR static projection images of plastic tubes. This goal was achieved by fitting ideal pixel intensity profiles for various diameter (6.4 to 19.1 mm) circular tubes to actual pixel intensity data. A phantom was constructed from plastic tubes of various diameters connected in series and filled with water mixed with contrast agent. Projection MR images were then taken of the phantom. The favorable performance of the model-based algorithm compared to manual assessment demonstrates the viability of our approach. The manual and algorithm approaches yielded diameter measurements that generally stayed within 1 x the pixel dimension. However, inconsistency of the manual approach can be observed from the larger standard deviations of its measured values. The method was then extended to HP 3He MRI, producing encouraging results at tube diameters characteristic of airways beyond the second generation, thereby justifying their application to lung airway imaging and measurement. Potential obstacles when measuring airway diameters using this method are discussed.

Advantages of parallel imaging in conjunction with hyperpolarized helium—A new approach to MRI of the lung

Hyperpolarized helium (3He) gas MRI has the potential to assess pulmonary function. The non-equilibrium state of hyperpolarized 3He results in the continual depletion of the signal level over the course of excitations. Under non-equilibrium conditions the relationship between the signal-to-noise ratio (SNR) and the number of excitations significantly deviates from that established in the equilibrium state. In many circumstances the SNR increases or remains the same when the number of data acquisitions decreases. This provides a unique opportunity for performing parallel MRI in such a way that both the temporal and spatial resolution will increase without the conventional decrease in the SNR. In this study an analytical relationship between the SNR and the number of excitations for any flip angle was developed. Second, the point-spread function (PSF) was utilized to quantitatively demonstrate the unconventional SNR behavior for parallel imaging in hyperpolarized gas MRI. Third, a 24-channel (24ch) receive and two-channel (2ch) transmit phased-array system was developed to experimentally prove the theoretical predictions with 3He MRI. The in vivo experimental results prove that significant temporal resolution can be gained without the usual SNR loss in an equilibrium system, and that the entire lung can be scanned within one breath-hold (approximately 13 s) by applying parallel imaging to 3D data acquisition.

Quantification of airway diameters and 3D airway tree rendering from dynamic hyperpolarized 3He magnetic resonance imaging

As another step toward extracting quantitative information from hyperpolarized 3He MRI, airway diameters in humans were measured from projection images and multislice images of the lungs. Values obtained were in good agreement with the Weibel lung morphometry model. The measurement of airway caliber can now be achieved without the use of ionizing radiation. Furthermore, it was demonstrated that 3D airway tree renderings could be constructed from the multislice data. Both the measurement of airway diameters and the rendering of 3D airway information hold promise for the clinical assessment of bronchoconstrictive diseases such as asthma and the associated evaluation of treatment effectiveness. Work is being done to address the uncertainties of the manually intensive methods we have developed.

Feasibility of combining MR perfusion, angiography, and 3He ventilation imaging for evaluation of lung function in a porcine model

RATIONALE AND OBJECTIVE

To assess the feasibility of combining magnetic resonance (MR) perfusion, angiography, and 3He ventilation imaging for the evaluation of lung function in a porcine model.

MATERIALS AND METHODS

Fourteen consecutive porcine models with externally delivered pulmonary emboli and/or airway occlusions were examined with MR perfusion, angiography, and 3He ventilation imaging. Ultrafast gradient-echo sequences were used for 3D perfusion and angiographic imaging, in conjunction with the use of contrast-agent injections. 2D multiple-section 3He imaging was performed subsequently via the inhalation of hyperpolarized 3He gas. The diagnostic accuracy of MR angiography for detecting pulmonary emboli was determined by two reviewers. The diagnostic confidence for different combinations of MR techniques was rated on the basis of a 5-point grading scale (5 = definite).

RESULTS

The sensitivity, specificity, and accuracy of MR angiography for detecting pulmonary emboli were approximately 85.7%, 90.5%, and 88.1%, respectively. The interobserver agreement was very strong (k = 0.82). There was a clear tendency for confidence to increase when first perfusion and then ventilation imaging were added to the angiographic image (Wilcoxon signed ranks test, P = 0.03).

CONCLUSION

The combination of the three methods of MR perfusion, angiography, and 3H ventilation imaging may provide complementary information on abnormal lung anatomy and function.

3D airway segmentation via hyperpolarized 3He gas MRI by using scale-based fuzzy connectedness

Computerized segmentation of 3D tracheobronchial tree is a necessary first step for subsequent registration and analysis of pulmonary airway and vascular magnetic resonance (MR) images obtained by using hyperpolarized 3Helium gas and Gadolinium. The scientific and clinical implications of acquiring these data on the tracheobronchial tree (for studying ventilation, V) and on the coinciding pulmonary arterioles (for studying perfusion, Q), is the next frontier for static and dynamic pulmonary MRI. In this paper, we report an airway segmentation method from 3He MR images based on the scale-based fuzzy connectedness approach. Incorporated in this method are the pre-processing steps of inhomogeneity correction and intensity standardization. The basic sequential steps in the proposed airway segmentation method are: (1) image acquisition, (2) radio frequency field inhomogeneity correction, (3) standardization of MR image intensity scale, (4) seed specification, (5) scale-based fuzzy connected segmentation of airways, and (6) thresholding and binarization. The majority of these steps are automatically executed; others allow interaction through a graphical interface provided in the 3DVIEWNIX software system, in which the algorithms are implemented. The method achieves an overall precision of about 98% in terms of the extent of overlap in repeated segmentations. Its level of accuracy can be described by a true positive volume fraction of about 98% (considering manual delineation as the surrogate of true delineation), and a false negative and positive volume fraction of about 1%. The total operator and computational time required per study are on the average 2 and 20 min.

Recent advances in imaging the lungs of intact small animals

A new generation of imaging devices now make it possible to generate both structural and functional images for the study of lung biology in small animals, including common laboratory mouse and rat models. "Micro" X-ray computed tomography and positron emission tomography scanners, highly sensitive cooled charge coupled device cameras for bioluminescence and fluorescence imaging, high magnetic field magnetic resonance imaging scanners, and recent advances in ultrasound system technology can be used to study such diverse processes as ventilation, perfusion, pulmonary hypertension, lung inflammation, and gene transfer, among others. Images from more than one modality can also be fused, allowing structure-function and function-function relationships to be studied on a regional basis. These new instruments, part of an emerging suite of techniques collectively known as "molecular imaging," provide an enormous potential for elucidating lung biology in intact animal models and systems.

Exploring lung function with hyperpolarized129Xe nuclear magnetic resonance

With the use of polarization-transfer pulse sequences and hyperpolarized (129)Xe NMR, gas exchange in the lung can be measured quantitatively. However, harnessing the inherently high sensitivity of this technique as a tool for exploring lung function requires a fundamental understanding of the xenon gas-exchange and diffusion processes in the lung, and how these may differ between healthy and pathological conditions. Toward this goal, we employed NMR spectroscopy and imaging techniques in animal models to investigate the dependence of the relative xenon gas exchange rate on the inflation level of the lung and the tissue density. The spectroscopic results indicate that gas exchange occurs on a time scale of milliseconds, with an average effective diffusion constant of about 3.3 x 10(-6)cm(2)/s in the lung parenchyma. Polarization-transfer imaging pulse sequences, which were optimized based on the spectroscopic results, detected regionally increased gas-exchange rates in the lung, indicative of increased tissue density secondary to gravitational compression. By exploiting the gas-exchange process in the lung to encode physiologic parameters, these methods may be extended to noninvasive regional assessments of lung-tissue density and the alveolar surface-to-volume ratio, and allow lung pathology to be detected at an earlier stage than is currently possible.

Mechanical ventilation for imaging the small animal lung

This review emphasizes some of the challenges and benefits of in vivo imaging of the small animal lung. Because mechanical ventilation plays a key role in high-quality, high-resolution imaging of the small animal lung, the article focuses particularly on the problems of ventilation support, control of breathing motion and lung volume, and imaging during different phases of the breathing cycle. Solutions for these problems are discussed primarily in relation to magnetic resonance imaging, both conventional proton imaging and the newer, hyperpolarized helium imaging of pulmonary airways. Examples of applications of these imaging solutions to normal and diseased lung are illustrated in the rat and guinea pig. Although difficult to perform, pulmonary imaging in the small animal can be a valuable source of information not only for the normal lung, but also for the lung challenged by disease.

An evaluation of pulmonary atelectasis and its re-expansion

RATIONALE AND OBJECTIVES

Atelectasis, the collapse of small airways, is a significant clinical problem. We use hyperpolarized (HP) 3He magnetic resonance imaging (MRI), or HP 3He MRI, to describe atelectasis in the normal Yorkshire pig, the pig with atelectasis, and the pig with re-expansion of atelectasis. We compare HP 3He MRI findings with depictions of atelectasis by proton MRI.

MATERIALS AND METHODS

During end-expiration in the anesthetized and paralyzed Yorkshire pig (n = 6), HP 3He gas produced by the optical pumping spin-exchange method, was delivered via an endotracheal tube. For two separate groups, atelectasis was either induced by Fogarty-catheter occlusion balloon inflation (n = 3), or lateral chest wall administration of sodium hydroxide (NaOH) (n = 3). MRI was performed at time zero, at 5, 9, 13, 15, and 19 minutes after atelectasis production, 30 minutes after balloon deflation, and 10 and 30 minutes after recruitment of atelectatic areas with increased tidal volumes and added positive end-expiratory pressure. High-resolution, cross-sectional MR images were procured, and comparison was made with the traditional proton MRI.

RESULTS

Atelectatic areas by HP 3He MRI were easily distinguishable in both subject groups, and correlated with those located by proton MR. HP 3He MR images showed absence of ventilation, whereas proton MR images depicted dense, white areas. Re-expansion of atelectasis was well delineated by HP 3He MRI.

CONCLUSION

HP 3He MRI may overcome many of the shortcomings of other well-established radiographic methods. HP 3He MRI is a novel, informative method for describing atelectasis and its re-expansion.

Voxelwise mapping of magnetic resonance ventilation-perfusion ratio in a porcine model by multimodality registration: technical note1

RATIONALE AND OBJECTIVES

The purpose of this study was to demonstrate the construction of voxelwise ventilation-perfusion (V/Q) ratio maps in a porcine model by nonrigidly aligning the respective ventilation and perfusion images using a multimodality registration algorithm.

MATERIALS AND METHODS

The first-pass contrast agent technique for a blood flow map and 3He used for ventilation imaging were performed using a normal porcine model. The registered 3He-ventilation image was then aligned to the blood flow map using a multimodality registration algorithm. The voxelwise V/Q ratios were calculated by dividing the registered 3He-ventilation image by the blood flow map. The V/Q ratios were also semi-logarithmically scatter-plotted against the number of voxels.

RESULTS

From perfusion magnetic resonance images, a voxel-by-voxel blood flow map was produced. Registered 3He ventilation image was successfully obtained as well as V/Q ratio map. Plots of the V/Q ratios obtained by this registration approach were similar to the logarithmic normal distribution.

CONCLUSION

Registration of MR perfusion and ventilation images can potentially enable quantitative evaluation of regional pulmonary function and thus yield deeper insight into the physiology and pathophysiology of the lung.

Clinical oxygen-enhanced magnetic resonance imaging of the lung

SUMMARY

Oxygen-enhanced magnetic resonance (MR) ventilation imaging is a new technique, and the full extent of its physiologic significance has not been elucidated. This review article includes (1) theory of oxygen enhancement; (2) respiratory physiology; (3) oxygen-enhanced MR imaging (MRI) sequence design; (4) basic study of oxygen-enhanced MRI in animal models and humans; (5) clinical study of oxygen-enhanced MRI; and (6) merits and demerits of the technique in comparison with hyperpolarized noble gas MR ventilation imaging. Oxygen-enhanced MRI provides not only ventilation-related information but also respiration-related information. Although application of oxygen-enhanced MR ventilation imaging to patients with pulmonary diseases has been limited, oxygen-enhanced MRI offers the possibility of demonstrating regional pulmonary function and substituting for nuclear medicine ventilation-perfusion study, when combined with MR perfusion imaging. We believe that further basic studies and clinical applications of this new technique will define the real significance of oxygen-enhanced MR ventilation imaging in the future of pulmonary functional imaging and its usefulness for diagnostic radiology.

Distal airways in humans: dynamic hyperpolarized 3He MR imaging--feasibility

Dynamic hyperpolarized helium 3 (3He) magnetic resonance (MR) imaging of the human airways is achieved by using a fast gradient-echo pulse sequence during inhalation. The resulting dynamic images show differential contrast enhancement of both distal airways and the lung periphery, unlike static hyperpolarized 3He MR images on which only the lung periphery is seen. With this technique, up to seventh-generation airway branching can be visualized.

Measurement of regional lung function in rats using hyperpolarized 3helium dynamic MRI

Dynamic regional lung function was investigated in rats using a radial acquisition cine (RA-CINE) pulse sequence together with hyperpolarized (HP) (3)He gas delivered by a constant flow ventilator. Based on regional differences in the behavior of inspired air, the lung was conceptually divided into two regions (the major airways and the peripheral airspace) for purposes of functional analysis. To measure regional function in the major airways, a large RF flip angle (24 degrees) was applied to reduce (3)He magnetization in the peripheral airspace, and signal intensity (SI) was normalized with the projected airway diameter to estimate local airflow. Higher normalized signal intensity was observed in the left branch airway as compared to the right branch airway. To determine regional function in the peripheral airspace, a small RF flip angle (6 degrees) was used. Incremental increases of peripheral SI in successive lung images were consistent with the increase in lung volume. A new "skipping" scanning strategy using dummy frames allows a trade-off between the number of frames acquired for dynamic information, the RF flip angle, and the penetration depth of (3)He magnetization into the lung. This work provides a novel approach to simultaneously assess dynamic regional function and morphology.

Time-resolved three-dimensional pulmonary MR angiography and perfusion imaging with ultrashort repetition time

RATIONALE AND OBJECTIVES

The purpose of this study was to implement ultrafast, multiphase three-dimensional (3D) magnetic resonance (MR) angiography and perfusion imaging after bolus injection of contrast medium to generate preliminary validation of parameters in a pig model and to illustrate potential applications in patients with lung abnormalities.

MATERIALS AND METHODS

Five healthy volunteers, five patients, and three pigs underwent rapid, time-resolved pulmonary MR angiography and perfusion imaging on a 1.5-T MR imager. All patients had undergone correlative computed tomographic or conventional angiography. The pulse sequence was a 3D spin-warp, gradient-echo acquisition with a repetition time of 1.6 msec and an echo time of 0.6 msec. Each 3D acquisition lasted 2-3 seconds, and 8-16 sequential measurements were made in each study. Artificial pulmonary emboli were generated in pigs with gelatin sponge. All patients had diseases of the pulmonary circulation (as confirmed with other studies).

RESULTS

Multiphasic, time-resolved pulmonary parenchymal enhancement was demonstrated in all healthy subjects and animals. All segmental (n = 100) and subsegmental (n = 200) branches were identified in the healthy subjects. Perfusion deficits were clearly demonstrated in all pigs after gelatin embolization. Perfusion defects were identified in two patients with lung disease. Abnormalities of the pulmonary vasculature were clearly identified in the patient group.

CONCLUSION

Dynamic time-resolved 3D pulmonary MR angiography and perfusion imaging is feasible in humans as well as in animals. Induced perfusion deficits are identifiable after artificial embolization in pigs. Combined pulmonary MR angiography and parenchymal (perfusion) imaging may improve evaluation of the pulmonary circulation in a variety of conditions.

MRI of the lungs using hyperpolarized noble gases

The nuclear spin polarization of the noble gas isotopes (3)He and (129)Xe can be increased using optical pumping methods by four to five orders of magnitude. This extraordinary gain in polarization translates directly into a gain in signal strength for MRI. The new technology of hyperpolarized (HP) gas MRI holds enormous potential for enhancing sensitivity and contrast in pulmonary imaging. This review outlines the physics underlying the optical pumping process, imaging strategies coping with the nonequilibrium polarization, and effects of the alveolar microstructure on relaxation and diffusion of the noble gases. It presents recent progress in HP gas MRI and applications ranging from MR microscopy of airspaces to imaging pulmonary function in patients and suggests potential directions for future developments.

Dynamic oxygen-enhanced MRI reflects diffusing capacity of the lung

The purpose of this study was to demonstrate the feasibility of dynamic oxygen-enhanced MRI in a clinical setting. We hypothesized that dynamic oxygen enhancement can reflect the regional diffusing capacity of the lung. Ten patients with pulmonary emphysema and seven healthy volunteers were examined with a respiratory-synchronized inversion recovery single-shot turbo spin-echo sequence (TR = 3200-5000 ms, TE = 16 ms, TI = 720 ms, ETS = 4 ms) following 100% oxygen inhalation, using a 1.5 T whole-body scanner. Maximum mean relative enhancement ratios calculated by averaging six defined regions of interest (ROIs) in both lungs were statistically compared between healthy volunteers and patients, and were correlated with diffusing lung capacity (%DL(CO)). In patients with pulmonary emphysema, maximum mean relative enhancement ratios were significantly decreased compared to those in healthy volunteers (P = 0.0008). Maximum mean relative enhancement ratio had excellent correlation with % DL(C0) (r(2) = 0.83). Dynamic oxygen-enhanced MRI may reflect the diffusing capacity of the lung; therefore, imaging of oxygen enhancement with MRI may provide maps of the diffusing capacity.

Nuclear magnetic resonance of laser-polarized noble gases in molecules, materials, and organisms

The sensitivity of conventional nuclear magnetic resonance (NMR) techniques is fundamentally limited by the ordinarily low spin polarization achievable in even the strongest NMR magnets. However, by transferring angular momentum from laser light to electronic and nuclear spins, optical pumping methods can increase the nuclear spin polarization of noble gases by several orders of magnitude, thereby greatly enhancing their NMR sensitivity. This review describes the principles and magnetic resonance applications of laser-polarized noble gases. The enormous sensitivity enhancement afforded by optical pumping can be exploited to permit a variety of novel NMR experiments across numerous disciplines. Many such experiments are reviewed, including the void-space imaging of organisms and materials, NMR and MRI of living tissues, probing structure and dynamics of molecules in solution and on surfaces, NMR sensitivity enhancement via polarization transfer, and low-field NMR and MRI.

Gadolinium containing contrast agents for pulmonary ventilation magnetic resonance imaging: preliminary results

RATIONALE AND OBJECTIVES

Five gadolinium containing contrast media (gadopentetate dimeglumine [Magnevist; Berlex Imaging, Montville, NJ, USA], gadobutrol [Gadovist; Schering, Järfälla, Sweden], gadoteridol [ProHance; Bracco-Byk Gulden, Konstanz, Germany], gadobenate dimeglumine [MultiHance; Bracco-Byk Gulden, Konstanz, Germany], and gadopentetate dimeglumine added with mannitol and a surface active detergent) were evaluated for their efficacy in magnetic resonance depiction of lung ventilation.

METHODS

All contrast agent aerosols were generated by a jet nebulizer. Twelve intubated domestic pigs were mechanically ventilated with the respective aerosolized contrast agent and studied on a 1.5 T MR imager. T1-weighted TSE images using respiratory gating were obtained before and after a 10-minute ventilation period. Pulmonary signal intensity (SI) and signal-to-noise (SNR) changes were measured for both lungs.

RESULTS

Mean SI increases ranged between 13.5% and 45.8% (right lung) and 14% and 39.8% (left lung). SNR changes ranged from +14.7% to +46.8% and from +13.1% to +40.5% for the right and left lung, respectively. The highest SI and SNR increases were observed in the gadoteridol group.

CONCLUSIONS

The use of gadolinium for MR ventilation imaging is primarily hindered by its viscosity properties and thus, its capability of aerosolization. Of the five agents tested, the medium with the lowest viscosity at room temperature (gadoteridol) showed the most promising enhancement results. The results reaffirm the potential of gadolinium-based contrast agents as a pulmonary imaging alternative. With a reduction of ventilation duration down to ten minutes, the method appears tolerable in a clinical setting.

Combined MR proton lung perfusion/angiography and helium ventilation: potential for detecting pulmonary emboli and ventilation defects

Three-dimensional (3D) perfusion imaging allows the assessment of pulmonary blood flow in parenchyma and main pulmonary arteries simultaneously. MRI using laser-polarized (3)He gas clearly shows the ventilation distribution with high signal-to-noise ratio (SNR). In this report, the feasibility of combined lung MR angiography, perfusion, and ventilation imaging is demonstrated in a porcine model. Ultrafast gradient-echo sequences have been used for 3D perfusion and angiographic imaging, in conjunction with the use of contrast agent injections. 2D multiple-section (3)He imaging was performed subsequently by inhalation of 450 ml of hyperpolarized (3)He gas. The MR techniques were examined in a series of porcine models with externally delivered pulmonary emboli and/or airway occlusions. With emboli, perfusion deficits without ventilation defects were observed; airway occlusion resulted in matched deficits in perfusion and ventilation. High-resolution MR angiography can unambiguously reveal the location and size of the blood emboli. The combination of the three imaging methods may provide complementary information on abnormal lung anatomy and function.

Hyperpolarized noble gas MR imaging of the lung: potential clinical applications

Hyperpolarized noble gases are a new class of MR contrast agent. Since the first hyperpolarized gas MR images of the lung were reported, there has been considerable interest in using hyperpolarized gas to obtain high spatial and temporal resolution images of the air spaces of the lung. In addition to static images of lung ventilation, new techniques are being developed using hyperpolarized gas to obtain dynamic, diffusion and oxygen concentration images of the lung. In this article, we review the potential clinical applications of pulmonary hyperpolarized gas MRI and discuss the preliminary findings in a variety of lung diseases. Hyperpolarized gas MRI has the potential to provide a comprehensive morphologic and functional assessment of the lung.

Pulmonary ventilation-perfusion MR imaging in clinical patients

The purpose of this study was to evaluate the feasibility of comprehensive magnetic resonance (MR) assessment of pulmonary perfusion and ventilation in patients. Both oxygen-enhanced ventilation MR images and first-pass contrast-enhanced perfusion MR images were obtained in 16 patients with lung diseases, including pulmonary embolism, lung malignancy, and bulla. Inversion recovery single-shot fast spin-echo images were acquired before and after inhalation of 100% oxygen. The overall success rate of perfusion MR imaging and oxygen-enhanced MR imaging was 94% and 80%, respectively. All patients with pulmonary embolism showed regional perfusion deficits without ventilation abnormality on ventilation-perfusion MR imaging. The results of the current study indicate that ventilation-perfusion MR imaging using oxygen inhalation and bolus injection of MR contrast medium is feasible for comprehensive assessment of pulmonary ventilation-perfusion abnormalities in patients with lung diseases.

Comparison of aerosolized gadoteridol and gadopentetate dimeglumine for magnetic resonance ventilation imaging of the lung

The purpose of this study was to compare aerosolized gadoteridol and gadopentetate dimeglumine in regard to homogeneity of aerosol distribution and relative pulmonary signal intensity (SI) changes after a 10-min mechanical ventilation period. Twenty experimental procedures were performed in 10 intubated domestic pigs that were mechanically aerosolized with the nebulized contrast medium. Images were obtained by using a respiratory-gated T(1)-weighted TSE sequence. Pulmonary SI increase for the right and left lung was 26% +/- 25% and 25% +/- 12%, respectively, for gadopentetate dimeglumine, and 45% +/- 12% and 43% +/- 10%, respectively, for gadoteridol. Aerosol distribution was rated homogeneous in all cases by two readers. It is concluded that both contrast agents in aerosolized form are capable of depicting pulmonary ventilation in healthy animals with lung capacities comparable to those of humans. SI differences between gadoteridol and gadopentetate dimeglumine are explained by their considerable difference in viscosity.

Dynamic spiral MRI of pulmonary gas flow using hyperpolarized (3)He: preliminary studies in healthy and diseased lungs

An optimized interleaved-spiral pulse sequence, providing high spatial and temporal resolution, was developed for dynamic imaging of pulmonary ventilation with hyperpolarized (3)He, and tested in healthy volunteers and patients with lung disease. Off-resonance artifacts were minimized by using a short data-sampling period per interleaf, and gradient-fidelity errors were compensated for by using measured k-space trajectories for image reconstruction. A nonsequential acquisition order was implemented to improve image quality during periods of rapid signal change, such as early inspiration. Using a sliding-window reconstruction, cine-movies with a frame rate of 100 images per second were generated. Dynamic images demonstrating minimal susceptibility- and motion-induced artifacts were obtained in sagittal, coronal, and axial orientations. The pulse sequence had the flexibility to image multiple slices almost simultaneously. Our initial experience in healthy volunteers and subjects with lung pathology demonstrated the potential of this new tool for capturing the features of lung gas-flow dynamics.

Oxygen-enhanced MR ventilation imaging of the lung: preliminary clinical experience in 25 subjects

OBJECTIVE

The purpose of this study was to show the feasibility of oxygen-enhanced MR ventilation imaging in a clinical setting with correlation to standard pulmonary function tests, high-resolution CT, and (81m)Kr ventilation scintigraphy.

SUBJECTS AND METHODS

Seven healthy volunteers, 10 lung cancer patients, and eight lung cancer patients with pulmonary emphysema were studied. A respiratory synchronized inversion-recovery single-shot turbo-spin-echo sequence (TE, 16; inversion time, 720 msec; interecho spacing, 4 msec) was used for data acquisition. The following paradigm of oxygen inhalation was used: 21% oxygen (room air), 100% oxygen, 21% oxygen. MR imaging data including maximum mean relative enhancement ratio and mean slope of relative enhancement were correlated with forced expiratory volume in 1 sec, diffusing lung capacity, high-resolution CT emphysema score, and mean distribution ratio of (81m)Kr ventilation scintigraphy.

RESULTS

Oxygen-enhanced MR ventilation images were obtained in all subjects. Maximum mean relative enhancement ratio and mean slope of relative enhancement of lung cancer patients were significantly decreased compared with those of the healthy volunteers (p < 0.0001, p < 0.0001). The mean slope of relative enhancement in lung cancer patients with pulmonary emphysema was significantly lower than that of lung cancer patients without pulmonary emphysema (p < 0.0001). Maximum mean relative enhancement ratio (r(2) = 0.81) was excellently correlated with diffusing lung capacity. Mean slope of relative enhancement (r(2) = 0.74) was strongly correlated with forced expiratory volume in 1 sec. Maximum mean relative enhancement had good correlation with the high-resolution CT emphysema score (r(2) = 0.38). The maximum mean relative enhancement had a strong correlation with the distribution ratio (r(2) = 0.77).

CONCLUSION

Oxygen-enhanced MR ventilation imaging in human subjects showed regional changes in ventilation, thus reflecting regional lung function.

Rat lung MRI using low-temperature prepolarized helium-3

The purpose of this study was to evaluate the recently proposed technique of 3He prepolarization at low temperature and high field (Kober et al. Magn Reson Med 1999; 41:1084-1087) for fast imaging of the lung. Helium-3 was cooled to 2.4 K in a magnetic field of 8 Tesla to obtain a polarization of 0.26%. The polarized 3He was warmed up to room temperature and transferred to a rat, with a final polarization of about 0.1%, large enough for acquiring a 3D image of the rat lung in 30 s.

Pulmonary ventilation imaged by magnetic resonance: at the doorstep of clinical application

Over the past few years, magnetic resonance imaging (MRI) has emerged as an important instrument for functional ventilation imaging. The aim of this review is to summarize established clinical methods and emerging techniques for research and clinical arenas. Before the advent of MRI, chest radiography and computed tomography (CT) dominated morphological lung imaging, while functional ventilation imaging was accomplished with scintigraphy. Initially, MRI was not used for morphological lung imaging often, due to technical and physical limitations. However, recent developments have considerably improved anatomical MRI, as well as advanced new techniques in functional ventilation imaging, such as inhaled contrast aerosols, oxygen, hyperpolarized noble gases (Helium-3, Xenon-129), and fluorinated gases (sulphur-hexafluoride). Straightforward images demonstrating homogeneity of ventilation and determining ventilated lung volumes can be obtained. Furthermore, new image-derived functional parameters are measurable, such as airspace size, regional oxygen partial pressure, and analysis of ventilation distribution and ventilation/perfusion ratios. There are several advantages to using MRI: lack of radiation, high spatial and temporal resolution and a broad range of functional information. The MRI technique applied in patients with chronic obstructive pulmonary disease, emphysema, cystic fibrosis, asthma, and bronchiolitis obliterans, may yield a higher sensitivity in the detection of ventilation defects than ventilation scintigraphy, CT or standard pulmonary function tests. The next step will be to define the threshold between physiological variation and pathological defects. Using complementary strategies, radiologists will have the tools to characterize the impairment of lung function and to improve specificity.

Pulmonary embolism: comparison of gadolinium-enhanced MR angiography with contrast-enhanced spiral CT in a porcine model

RATIONALE AND OBJECTIVES

The purpose of this study was to compare gadolinium-enhanced magnetic resonance (MR) angiography with contrast material-enhanced computed tomography (CT) for the detection of small (4-5-mm) pulmonary emboli (PE), with a methacrylate cast of the porcine pulmonary vasculature used as the diagnostic standard.

MATERIALS AND METHODS

In 15 anesthetized juvenile pigs, colored methacrylate beads (5.2 and 3.8 mm diameter-the size of segmental and subsegmental emboli in humans) were injected via the left external jugular vein. After embolization, MR angiographic and CT images were obtained. The pigs were killed, and the pulmonary arterial tree was cast in clear methacrylate, allowing direct visualization of emboli. Three readers reviewed CT and MR angiographic images independently and in random order.

RESULTS

Forty-nine separate embolic sites were included in the statistical analysis. The mean sensitivity (and 95% confidence intervals) for CT and MR angiography, respectively, were 76% (68%-82%) and 82% (75%-88%) (P > .05); the mean positive predictive values, 92% (85%-96%) and 94% (88%-97%) (P > .05). In this porcine model, PE were usually seen as parenchymal perfusion defects (98%) with MR angiography and as occlusive emboli (100%) with CT.

CONCLUSION

MR angiography is as sensitive as CT for the detection of small PE in a porcine model.

Mechanical delivery of aerosolized gadolinium-DTPA for pulmonary ventilation assessment in MR imaging

RATIONALE AND OBJECTIVES

To evaluate a new technique with mechanical administration of aerosolized gadolinium (Gd)-DTPA for MR visualization of lung ventilation.

METHODS

Ten experimental procedures were performed in six domestic pigs. Gd-DTPA was aerosolized by a small-particle generator. The intubated animals were mechanically aerosolized with the nebulized contrast agent and studied on a 1.5-T MR imager. Respiratory gated T1-weighted turbo spin-echo images were obtained before, during, and after contrast administration. Pulmonary signal intensity (SI) changes were calculated for corresponding regions of both lungs. Homogeneity of aerosol distribution was graded independently by two radiologists.

RESULTS

To achieve a comparable SI increase as attained in previous trials that used manual aerosol ventilation, a ventilation period of 20 minutes (formerly 30 minutes) was sufficient. Mean SI changes of 116% were observed after that duration. Contrast delivery was rated evenly distributed in all cases by the reviewers.

CONCLUSIONS

The feasibility of applying Gd-DTPA as a contrast agent to demonstrate pulmonary ventilation in large animals has been described before. The results of this refined technique substantiate the potential of Gd-based ventilation MR imaging by improving aerosol distribution and shortening the nebulization duration in the healthy lung.

Oxygen-enhanced magnetic resonance ventilation imaging of lung

The oxygen-enhanced magnetic resonance (MR) ventilation imaging is a new technique, and the full extent of its physiological significance has not been elucidated. This review article includes background on (1) respiratory physiology; (2) mechanism and optimization of oxygen-enhanced MR imaging technique; (3) recent applications in animal and human models; and (4) merits and demerits of the technique in comparison with hyperpolarized noble gas MR ventilation imaging. Application of oxygen-enhanced MR ventilation imaging to patients with pulmonary diseases has been very limited. However, we believe that further basic studies, as well as clinical applications of this new technique will define the real significance of oxygen-enhanced MR ventilation imaging in the future of pulmonary functional imaging and its usefulness for diagnostic radiology.

Measurements of hyperpolarized gas properties in the lung. Part III: (3)He T(1)

Hyperpolarized (3)He spin-lattice relaxation was investigated in the guinea pig lung using spectroscopy and imaging techniques with a repetitive RF pulse series. T(1) was dominated by interactions with oxygen and was used to measure the alveolar O(2) partial pressure. In animals ventilated with a mixture of 79% (3)He and 21% O(2), T(1) dropped from 19.6 sec in vivo to 14.6 sec after cardiac arrest, reflecting the termination of the intrapulmonary gas exchange. The initial difference in oxygen concentration between inspired and alveolar air, and the temporal decay during apnea were related to functional parameters. Estimates of oxygen uptake were 29 +/- 11 mL min(-1) kg(-1) under normoxic conditions, and 9.0 +/- 2.0 mL min(-1) kg(-1) under hypoxic conditions. Cardiac output was estimated to be 400 +/- 160 mL min(-1) kg(-1). The functional residual capacity derived from spirometric magnetic resonance experiments varied with body mass between 5.4 +/- 0.3 mL and 10.7 +/- 1.1 mL. Magn Reson Med 45:421-430, 2001.

Detection of emphysema in rat lungs by using magnetic resonance measurements of 3He diffusion

Emphysema is a pulmonary disease characterized by alveolar wall destruction, resulting in enlargement of gas exchange spaces without fibrosis. This condition is a part of chronic obstructive pulmonary disease (COPD), which causes 3.5% of deaths worldwide [Anonymous (1990) World Health Stat. Q. Special, 1-51] and contributes greatly to the global burden of disease [Murray, C. J. & Lopez, A. D. (1996) Science 274, 740-743]. Alveolar regeneration has been shown in animal models and could have potential for clinical treatment of early-stage emphysema. However, current techniques for detection of emphysema are not sensitive at the initial stages. Early-stage human panacinar emphysema is modeled in elastase-treated animals. Here, we provide an in vivo imaging method for differentiating normal and emphysematous rat lungs by measuring the apparent diffusion coefficient (ADC) of hyperpolarized (3)He by using magnetic resonance imaging. These data show that the ADC is significantly larger in elastase-treated rats, indicating alveolar expansion. Whereas these rats were clinically asymptomatic, conventional histology confirmed presence of injury. Our results indicate that measurement of the hyperpolarized (3)He ADC can be a valuable research tool and has potential application in the clinical setting.