23Na and 2H magnetic resonance studies of osteoarthritic and osteoporotic articular cartilage

Quadrupolar jump-and-return pulse sequence for fluid-suppressed sodium MRI of the knee joint at 7T

PURPOSE

To demonstrate the feasibility of the so-called quadrupolar jump-and-return (QJR) pulse sequence by assessing its performance on the contrast modification to knee cartilage and quality of fluid suppression in the knee joint in vivo at 7T.

METHODS

The right knee joints of five healthy volunteers (3 males: mean age = 32.4 ± 1.3 years; 2 females: mean age = 27.9 ± 1.0 years; mean age = 30.6 ± 2.7 years) were scanned on a 7T scanner with variation of the delay in the QJR sequence from 1 ms to 5 ms. For one healthy volunteer, the QJR scan with the delay of 3 ms and the inversion-recovery (IR) scan were performed. Numerical simulations were conducted to evaluate the effects of B₀ - and B₁ -field inhomogeneities and residual quadrupolar couplings on fluid suppression and tissue contrast, respectively.

RESULTS

The QJR sequence suppressed the fluid signal from the artery and produced the contrast of knee cartilage in vivo. Its performance was comparable to that of the conventional IR sequence. Numerical simulations suggested that the fluid suppression may not be affected much by field inhomogeneities but that a distribution of residual quadrupolar couplings and weak RF pulses may interfere with the clear interpretation of cartilage contrast.

CONCLUSION

This preliminary work demonstrated that the QJR pulse sequence produces contrast for knee cartilage while suppressing the fluid signal from the artery. The knee cartilage contrast and quality of fluid suppression obtained from the QJR sequence were comparable to those of the IR sequence. Magn Reson Med 80:641-647, 2018. © 2017 International Society for Magnetic Resonance in Medicine.

Quadrupole sensitive pulse for signal filtering

A longstanding problem in quadrupolar NMR of semi-solids is the selection of signals originating from ordered nuclei, i.e. those that experience a non-vanishing quadrupolar coupling. Established techniques, such as for example multiple-quantum filters are not adequate in situations when the radio frequency power is on the order of the quadrupolar coupling or the quadrupolar relaxation rates, such as may be the case on an MRI scanner, or in ex situ applications. In this manuscript we show a new method for the selective excitation of ordered spin-3/2 nuclei, which produces the desired results when the radio frequency power is approximately equal or smaller than quadrupolar frequency. Using a combination of simulations and experiments with (23)Na in NaCl solution, Pf1-solutions, and bovine patellar cartilage samples we further show how the value of the quadrupolar frequency and global features of a quadrupolar coupling distribution can be extracted from these experiments.

Sodium NMR/MRI for anisotropic systems

Sodium ((23)Na) plays a central role in many physiological processes, and its high NMR sensitivity makes it an attractive nucleus for biomedical NMR and MRI research. Many biological tissues contain structures such as fibers and membranes that impose anisotropic translational and rotational motions on the sodium ions. Translational motion can be studied by diffusion measurements. Anisotropic rotational motion results in non-vanishing quadrupolar interaction that it is best studied by exploiting multiple quantum coherences for (23)Na NMR spectroscopy and MRI. The current review covers the application of the various NMR techniques to the study of (23)Na in anisotropic compartments in cartilage, tendon, intervertebral discs, red blood cells, nervous system and muscles.

Sodium MRI: methods and applications

Sodium NMR spectroscopy and MRI have become popular in recent years through the increased availability of high-field MRI scanners, advanced scanner hardware and improved methodology. Sodium MRI is being evaluated for stroke and tumor detection, for breast cancer studies, and for the assessment of osteoarthritis and muscle and kidney functions, to name just a few. In this article, we aim to present an up-to-date review of the theoretical background, the methodology, the challenges, limitations, and current and potential new applications of sodium MRI.

Optic nerve: separating compartments based on 23Na TQF spectra and TQF-diffusion anisotropy

We present a triple quantum filtered (TQF) sodium spectroscopy study of an excised bovine optic nerve. By choosing proper experimental parameters, this technique allowed us to independently observe the satellite transitions originating from the various compartments in the tissue. TQF-based diffusion experiments provided further characterization of the compartments in terms of their geometry. As a result, the peak that exhibited the smallest residual quadrupolar splitting, and the largest diffusion anisotropy was assigned to axons. Two other pairs of satellite peaks were assigned to extra-cellular compartments on the basis of either the size of their quadrupolar splitting or the diffusion properties.

Application of sodium triple-quantum coherence NMR spectroscopy for the study of growth dynamics in cartilage tissue engineering

We studied the tissue growth dynamics of tissue-engineered cartilage at an early growth stage after cell seeding for four weeks using sodium triple-quantum coherence NMR spectroscopy. The following tissue-engineering constructs were studied: 1) bovine chondrocytes cultured in alginate beads; 2) bovine chondrocytes cultured as pellets (scaffold-free chondrocyte pellets); and 3) human marrow stromal cells (HMSCs) seeded in collagen/chitosan based biomimetic scaffolds. We found that the sodium triple-quantum coherence spectroscopy could differentiate between different tissue-engineered constructs and native tissues based on the fast and slow components of relaxation rate as well as on the average quadrupolar coupling. Both fast (Tf ) and slow (Ts ) relaxation times were found to be longer in chondrocyte pellets and biomimetic scaffolds compared to chondrocytes suspended in alginate beads and human articular cartilage tissues. In all cases, it was found that relaxation rates and motion of sodium ions measured from correlation times were dependent on the amount of macromolecules, high cell density and anisotropy of the cartilage tissue-engineered constructs. Average quadrupolar couplings were found to be lower in the engineered tissue compared to native tissue, presumably due to the lack of order in collagen accumulated in the engineered tissue. These results support the use of sodium triple-quantum coherence spectroscopy as a tool to investigate anisotropy and growth dynamics of cartilage tissue-engineered constructs in a simple and reliable way.

Low-field one-dimensional and direction-dependent relaxation imaging of bovine articular cartilage

The structure of articular cartilage is separated into three layers of differently oriented collagen fibers, which is accompanied by a gradient of increasing glycosaminoglycan (GAG) and decreasing water concentration from the top layer towards the bone interface. The combined effect of these structural variations results in a change of the longitudinal and transverse relaxation times as a function of the distance from the cartilage surface. In this paper, this dependence is investigated at a magnetic field strength of 0.27 T with a one-dimensional depth resolution of 50 μm on bovine hip and stifle joint articular cartilage. By employing this method, advantage is taken of the increasing contrast of the longitudinal relaxation rate found at lower magnetic field strengths. Furthermore, evidence for an orientational dependence of relaxation times with respect to an axis normal to the surface plane is given, an observation that has recently been reported using high-field MRI and that was explained by preferential orientations of collagen bundles in each of the three cartilage zones. In order to quantify the extent of a further contrast mechanism and to estimate spatially dependent glycosaminoglycan concentrations, the data are supplemented by proton relaxation times that were acquired in bovine articular cartilage that was soaked in a 0.8 mM aqueous Gd++ solution.

Signal-to-noise optimization for sodium MRI of the human knee at 4.7 Tesla using steady state

Sodium magnetic resonance imaging of knee cartilage is a possible diagnostic method for osteoarthritis, but low signal-to-noise ratio yields low spatial resolution images and long scan times. For a given scan time, a steady-state approach with reduced repetition time and increased averaging may improve signal-to-noise ratio and hence attainable resolution. However, repetition time reduction results in increased power deposition, which must be offset with increased radiofrequency pulse length and/or reduced flip angle to maintain an acceptable specific absorption rate. Simulations varying flip angle, repetition time, and radiofrequency pulse length were performed for constant power deposition corresponding to ∼6 W/kg over the human knee at 4.7 T. For 10% agar, simulation closely matched experiment. For healthy human knee cartilage, a 37% increase in signal-to-noise ratio was predicted for steady-state over "fully relaxed" parameters while a 29% ± 4% increase was determined experimentally (n=10). Partial volume of cartilage with synovial fluid, inaccurate relaxation parameters used in simulation, and/or quadrupolar splitting may be responsible for this disagreement. Excellent quality sodium images of the human knee were produced in 9 mins at 4.7 T using the signal-to-noise ratio enhancing steady-state technique.