Designing syntheses of cellulose and starch derivatives with basic or cationic N -functions: part I-cellulose derivatives

Laccase immobilization and its degradation of emerging pollutants: A comprehensive review

The chronic lack of effective disposal of pollutants has resulted in the detection of a wide variety of EPs in the environment, with concentrations high enough to affect ecological health. Laccase, as a versatile oxidase capable of catalyzing a wide range of substrates and without producing toxic by-products, is a potential candidate for the biodegradation of pollutants. Immobilization can provide favorable protection for free laccase, improve the stability of laccase in complex environments, and greatly enhance the reusability of laccase, which is significant in reducing the cost of industrial applications. This study introduces the properties of laccase and subsequently elaborate on the different support materials for laccase immobilization. The research advances in the degradation of EDs, PPCPs, and PAHs by immobilized laccase are then reviewed. This review provides a comprehensive understanding of laccase immobilization, as well as the advantages of various support materials, facilitating the development of more economical and efficient immobilization systems that can be put into practice to achieve the green degradation of EPs.

Chemical features and biological effects of degradation products of biodegradable plastics in simulated small waterbody environment

A plethora of research has focused on the biosafety of biodegradable plastics (BPs), including their microplastic formation and additives leaching; however, relatively fewer studies have explored biodegradation products. This study aims to investigate the biological effects and chemical features of degradation products from three kinds of BPs, namely polyglycolic acid (PGA), poly (butylene adipate-co-terephthalate) (PBAT), and the blends of PGA/PBAT without the addition of additives, in a simulated small waterbody environment with extracted soil solution for three months. Results showed that exposure to the whole degradation remnants of three BPs had no lethal effects on zebrafish at the current BP environmental concentrations (from 0.24 to 12.72 mg plastic/L) in small waterbodies. However, from the calculated BPs environmental concentrations (from 0.57 to 43.82 mg plastic/L) in 2026, PGA and PGA/PBAT blends may cause adverse effects on the cardiovascular system such as heartbeat rate suppression in zebrafish embryos, and also lead to reduced body length and pericardial edema and spinal curvature in fish larvae. We further qualitatively analyzed the composition of degradation products, and quantitatively measured four dominant degradation monomers (glycolic acid (GA), adipic acid (A), 1,4-butanediol (B), and terephthalic acid (T)) in the degradation remnants. It was found that the observed toxicities were probably due to the presence of GA, A, and T monomers, and their concentrations can reach 0.776, 0.034, and 0.6 mg/L under the calculated future scenario, respectively. It is worth mentioning that either GA or T monomers at the above concentrations were found to cause suppressed heartbeat rate in zebrafish embryos. Collectively, though the degradation products of BPs are temporarily safe at current environmental concentrations, they may lead to non-negligible toxicity with increasing production and continual improper recycling and/or BP waste management.

Recent Advances in Functional Cellulose-based Films with Antimicrobial and Antioxidant Properties for Food Packaging

The packaging of food plays a crucial role in food preservation worldwide. However, traditional packaging systems are passive layers with weak efficiency in protecting the food quality. Therefore, packaged foods are gradually spoiled due to the oxidation and growth of microorganisms. Additionally, most of the commercial packaging films are made of petroleum-based materials which raise environmental concerns. Accordingly, the development of eco-friendly natural-derived active packaging systems has increased the attention of scientists. Cellulose as the most abundant polysaccharide on earth with high biocompatibility, no toxicity, and high biodegradability has extensively been applied for the fabrication of packaging films. However, neat cellulose-based films lack antioxidant and antimicrobial activities. Therefore, neat cellulose-based films are passive films with weak food preservation performance. Active films have been developed by incorporating antioxidants and antimicrobial agents into the films. In this review, we have explored the latest research on the fabrication of antimicrobial/antioxidant cellulose-based active packaging films by incorporating natural extracts, natural polyphenols, nanoparticles, and microparticles into the cellulose-based film formulations. We categorized these types of packaging films into two main groups: (i) blend films which are obtained by mixing solutions of cellulose with other soluble antimicrobial/antioxidant agents such as natural extracts and polyphenols; and (ii) composite films which are fabricated by dispersing antimicrobial/antioxidant nano- or microfillers into the cellulose solution. The effect of these additives on the antioxidant and antimicrobial properties of the films has been explained. Additionally, the changes in the other properties of the films such as hydrophilicity, water evaporation rate, and mechanical properties have also been briefly addressed.

Laccase immobilized on nanocomposites for wastewater pollutants degradation: current status and future prospects

The bio-enzyme degradation technology is a promising approach to sustainably remove pollution in the water and laccase is one of the most widely used enzymes in this area. Nevertheless, the further industrial application of laccase is limited by low stability, short service, low reusability and high price. The immobilization technology can significantly improve the stability and reusability of enzymes and thus promoting their industrial applications. Nanocomposite materials have been developed and applied in the efficient immobilization of laccase due to their superior physical, chemical, and biological performance. This paper presents a comprehensive review of various nanocomposite immobilization methods for laccase and the consequent changes in enzymatic properties post-immobilization. Additionally, a comprehensive analysis is conducted on the factors that impact laccase immobilization and its water removal efficiency. Furthermore, this review examines the effectiveness of common contaminants' removal mechanisms while summarizing and discussing issues related to laccase immobilization on nanocomposite carriers. This review aims to provide valuable guidance for enhancing laccase immobilization efficiency and enzymatic water pollutant removal.

Interpolymer Complexes Based on Cellulose Ethers: Application

Interpolymer complexes based on cellulose ethers have gained significant interest in recent years due to their versatile applications. These complexes are formed by combining different polymers through non-covalent interactions, resulting in stable structures. This article provides an overview of the various fields where IPCs based on cellulose ethers find application. IPCs based on cellulose ethers show great potential in drug delivery systems. These complexes can encapsulate drugs and enable controlled release, making them suitable for sustained drug delivery. They offer advantages in terms of precise dosage and enhanced therapeutic efficacy. Coatings and adhesives also benefit from IPCs based on cellulose ethers. These complexes can form films with excellent mechanical strength and enhanced water resistance, providing durability and protection. They have applications in various industries where coatings and adhesives play a crucial role. In food packaging, IPCs based on cellulose ethers are highly relevant. These complexes can form films with effective barrier properties against oxygen and water vapor, making them ideal for packaging perishable foods. They help extend to shelf life of food products by minimizing moisture and oxygen transfer. Various methods, such as solvent casting, coacervation, and electrostatic complexation, are employed to synthesize IPCs based on cellulose ethers.

Polysaccharide-based C-dots and polysaccharide/C-dot nanocomposites: fabrication strategies and applications

C-dots are a new class of materials with vast applications. The synthesis of bio-based C-dots has attracted increasing attention in recent years. Polysaccharides being the most abundant natural materials with high biodegradability and no toxicity have been the focus of researchers for the synthesis of C-dots. C-dots obtained from polysaccharides are generally fabricated via thermal procedures, carbonization, and microwave pyrolysis. Small size, photo-induced electron transfer (PET), and highly adjustable luminosity behavior are the most important physical and chemical properties of C-dots. However, C-dot/polysaccharide composites can be introduced as a new generation of composites that combine the features of both C-dots and polysaccharides having a wide range of applications in biomedicines, biosensors, drug delivery systems, etc. This review demonstrates the features, raw materials, and methods used for the fabrication of C-dots derived from different polysaccharides. Furthermore, the properties, applications, and synthesis conditions of various C-dot/polysaccharide composites are discussed in detail.

Nitrate pollution and its solutions with special emphasis on electrochemical reduction removal

Nitrate pollution has become a serious environmental concern all over the world including in China due to the mismanagement of water resources and human activities. Agricultural runoff and industrial and nuclear waste are among the major sources of nitrate pollution. Consuming nitrate-rich water can cause many chronic diseases including digestive problems, which can lead to many types of cancer and other serious health issues. Denitrification is the natural process for nitrate reduction under aerobic conditions, but it cannot handle an excess of nitrate, so several methods have been adopted for nitrate removal, i.e., biological, chemical, physicochemical, and electrochemical reduction removal. Among all, electrochemical reduction removal is a cost-effective and environmental-friendly process. To obtain the maximal elimination efficiency ideal conditions of current intensity, pH, plate distance, initial nitrate concentration, and type of electrolyte solution should be studied for effective nitrate removal. Electrochemical reduction removal of nitrate involves the transfer of electrons and hydrogenation. Besides an efficient nitrate removal process, electrochemical reduction removal has some drawbacks like sludge formation, low selectivity for nitrogen, and production of brine that limit its long-term implementation. This review focused on nitrate pollution, previous nitrate removal strategies, and essential principles for understanding the mechanism of electrochemical reduction removal and controlling the products of the reaction.

Green Polymer Nanocomposites for Skin Tissue Engineering

Fabrication of an appropriate skin scaffold needs to meet several standards related to the mechanical and biological properties. Fully natural/green scaffolds with acceptable biodegradability, biocompatibility, and physiological properties quite often suffer from poor mechanical properties. Therefore, for appropriate skin tissue engineering and to mimic the real functions, we need to use synthetic polymers and/or additives as complements to green polymers. Green nanocomposites (either nanoscale natural macromolecules or biopolymers containing nanoparticles) are a class of scaffolds with acceptable biomedical properties window (drug delivery and cardiac, nerve, bone, cartilage as well as skin tissue engineering), enabling one to achieve the required level of skin regeneration and wound healing. In this review, we have collected, summarized, screened, analyzed, and interpreted the properties of green nanocomposites used in skin tissue engineering and wound dressing. We particularly emphasize the mechanical and biological properties that skin cells need to meet when seeded on the scaffold. In this regard, the latest state of the art studies directed at fabrication of skin tissue and bionanocomposites as well as their mechanistic features are discussed, whereas some unspoken complexities and challenges for future developments are highlighted.

Thiomers of Chitosan and Cellulose: Effective Biosorbents for Detection, Removal and Recovery of Metal Ions from Aqueous Medium

Removal of toxic metal ions using adsorbents is a well-known strategy for water treatment. While chitosan and cellulose can adsorb weakly some types of metals, incorporating thiols as metal chelating agents can improve their sorption behaviors significantly. Presented in this review are the various chemical modification strategies applicable for thiolation of chitosan and cellulose in the forms of mercaptans, xanthates and dithiocarbamates. Moreover, much attention has been paid to the specific strategies for controlling the thiolation degree and characterization approaches for establishing the structure-property relationship. Also, the kinetics and isotherm models that elucidate the adsorption processes and mechanisms induced by the thiomers have been explained. These thiomers have found great potentials in the applications associated with metal removal, metal recovery and metal detection.

Natural Polymer-Based Antimicrobial Hydrogels without Synthetic Antibiotics as Wound Dressings

Wound healing is usually accompanied by bacterial infection. The excessive use of synthetic antibiotics leads to drug resistance, posing a significant threat to human health. Hydrogel-based wound dressings aimed at mitigating bacterial infections have emerged as an effective wound treatment. The review presented herein particularly focuses on the hydrogels originating from natural polymers. To further enhance the performance of wound dressings, various strategies and approaches have been developed to endow the hydrogels with excellent broad-spectrum antibacterial activity. Those that are summarized in the current review are the hydrogels with intrinsic or stimuli-triggered bactericidal properties and others that serve as vehicles for loading antibacterial agents without synthetic antibiotics. Specific attention is paid to antimicrobial mechanisms and the antibacterial performance of hydrogels. Practical antibacterial applications to accelerate the wound healing employing these antibiotic-free hydrogels are also introduced along with the discussion on the current challenges and perspectives leading to new technologies.

A Simplified Method of Synthesis to Obtain Zwitterionic Cellulose under Mild Conditions with Active Ionic Moieties

A simplified procedure to synthesize zwitterionic cellulose by means of N-protected aspartic anhydride under mild conditions was developed. The preparation of modified cellulose samples was carried out under heterogeneous, aqueous conditions by reacting NH₄OH-activated cellulose with aspartic anhydrides N-protected with trifluoroacetyl (TFAc) and carbobenzyloxy (Cbz). Modified cellulose samples Cel-Asp-N-TFAc and Cel-Asp-N-Cbz were characterized by Fourier Transform Infrared (FTIR) and ¹³C solid state Nuclear Magnetic Resonance (NMR) spectroscopy. The functionalization degree of each cellulose sample was determined by the ¹³C NMR signal integration values corresponding to the cellulose C1 vs. the Cα of the aspartate residue and corroborated by elemental analysis. In agreement, both analytical methods averaged a grafting degree of 20% for Cel-Asp-N-TFAc and 16% for Cel-Asp-N-Cbz. Conveniently, Cel-Asp-N-TFAc was concomitantly partially N-deprotected (65%) as determined by the ninhydrin method. The zwitterion character of this sample was confirmed by a potentiometric titration curve and the availability of these amino acid residues on the cellulose was inspected by adsorption kinetics method with a 100 mg L⁻¹ cotton blue dye solution. In addition, the synthesis reported in the present work involves environmentally related advantages over previous methodologies developed in our group concerning to zwitterionic cellulose preparation.

Grafting of poly[(methyl methacrylate)-block-styrene] onto cellulose via nitroxide-mediated polymerization, and its polymer/clay nanocomposite

For the first time, nitroxide-mediated polymerization (NMP) was used for synthesis of graft and block copolymers using cellulose (Cell) as a backbone, and polystyrene (PSt) and poly(methyl metacrylate) (PMMA) as the branches. For this purpose, Cell was acetylated by 2-bromoisobutyryl bromide (BrBiB), and then the bromine group was converted to 4-oxy-2,2,6,6-tetramethylpiperidin-1-oxyl group by a substitution nucleophilic reaction to afford a macroinitiator (Cell-TEMPOL). The macroinitiator obtained was subsequently used in controlled graft and block copolymerizations of St and MMA monomers to yield Cell-g-PSt and Cell-g-(PMMA-b-PSt). The chemical structures of all samples as representatives were characterized by FTIR and (1)H NMR spectroscopies. In addition, Cell-g-(PMMA-b-PSt)/organophilic montmorillonite nanocomposite was prepared through a solution intercalation method. TEM was used to evaluate the morphological behavior of the polymer-clay system. It was demonstrated that the addition of small percent of organophilic montmorillonite (O-MMT; 3wt.%) was enough to improve the thermal stability of the nanocomposite.