Dual Dynamic Cross-Linked Epoxy Vitrimers Used for Strong, Detachable, and Reworkable Adhesives

Novel reprocessable thermosetting adhesives (RTAs), which combine high adhesive strength, reusability, disassembly, and recyclability features, have attracted increasing attention. However, developing RTAs with a rapidly adhesive rate while ensuring high adhesive strength and self-healing ability is still a significant challenge. Here, we prepared a novel vitrimer called DAx-DTSAy, which can be used as an RTA. First, by adjusting the ratio of rigid and flexible segments, maximum tensile strength reached 35.92 MPa. Second, the combined effect of dynamic hydroxyl ester bonds and dynamic disulfide bonds resulted in a rapid stress relaxation behavior, with a complete relaxation time 13.6 times shorter than a vitrimer only cross-linked with hydroxy ester bonds. This feature endowed its good self-healing and reprocessing capabilities. After self-healing at 180 °C, the maximum healing rate of mechanical properties was 91.8%. After three reprocesses, the maximum recovery rate of tensile strength was 120.2%. Furthermore, the combination of rigid and flexible segments and the synergistic effect of dual dynamic covalent bonds made DAx-DTSAy capable of use as a high-performance RTA. The lap shear strength of a DAx-DTSAy film on stainless steel reached 18.18 MPa after 15 min, with a recovery rate of 91.9% after 5 rebonding cycles. Additionally, DAx-DTSAy can be disassembled in chemical agents and exhibited better insulation properties compared to traditional epoxy resins. DAx-DTSAy can be employed as a novel high-performance adhesive in applications such as electronic devices and transportation, contributing to the development of thermosetting adhesives toward recyclability and sustainability.

A Sol-Gel Transition and Self-Healing Hydrogel Triggered via Photodimerization of Coumarin

Reversible chemical covalency provides a path to materials that can degrade and recombine with appropriate stimuli and which can be used for tissue regeneration and repair. However, designing and preparing efficient and quickly self-healing materials has always been a challenge. The preparation strategies of photoresponsive gels attract a lot of attention due to their precise spatial and temporal control and their predetermined response to light stimulation. In this work, the linear copolymer PAC was synthesized via precipitation polymerization of acrylic acid and 7-(2-acrylate-ethoxylated)-4-methylcoumarin. The coumarin groups on the copolymer PAC side chains provide a reversible chemical cross-linking via photostimulation, which achieves reversible regulation of the gel network structure. The concentration of 18 wt% PAC solution produces gelation under irradiation with 365 nm. In contrast, PAC gel is restored to soluble copolymers under irradiation with 254 nm. Meanwhile, the mechanical and self-healing properties of the gel were also explored. It is demonstrated that the cracks of the gel can be repaired simply, quickly, and efficiently. Furthermore, the PAC copolymer shows an excellent adhesion property based on the reversible sol-gel transition. Thus, the PAC gel has considerable potential for applications in engineering and biomedical materials.

Highly Antibacterial and Self-Healing Janus Fabric for Effective Body Moisture/Thermal Management and Durable Waterproof

Despite the development of many functional fabrics, they are unable to meet practical needs due to their monolithic functions and low durability. Therefore, a multifunctional waterborne polyurethane nanodroplet containing disulfide bonds (WSPU) was synthesized using a simple and environmentally friendly approach. The functional WSPU nanodroplet coating endowed fabrics with a variety of properties, including exceptional hydrophobicity, antibacterial properties, self-healing at room temperature, directional transport, etc. The functionalized fabric demonstrated durable mechanical and chemical stabilities due to the combined effects of disulfide bond reconstruction and hydrophobic chain migration. It exhibited the ability to regain its hydrophobic properties at room temperature after 50 friction cycles were performed without requiring external stimulation. Furthermore, the fabric maintained a water contact angle above 140°, even after being subjected to washing, boiling, and immersion in acid and alkali solutions. In addition, as a result of the fabric's Janus-like wettability, it performed various functions in accordance with varying weather conditions, in terms of wearing comfort and breathability. In hot weather or during exercise, the Janus fabric with the hydrophilic side facing outward enhances the process of sweat-directed perspiration, resulting in a notable cooling effect. On rainy days, the Janus fabric, when positioned with the hydrophobic side facing outward, exhibited excellent waterproof performance. This study presents an opportunity to explore the development of multifunctional fabrics through the combined effects of several functions.

Functionalized TMC and ε-CL elastomers with shape memory and self-healing properties

Introduction: Smart elastomers, which possess self-healing and shape memory capabilities, have immense potential in the field of biomedical applications. Polycarbonates and polyesters have gained widespread interest due to their remarkable biocompatibility over the last century. Nevertheless, the lack of functional versatility in conventional polyesters and polycarbonates means that they fall short of meeting the ever-evolving demands of the future. Methods: This paper introduced a new smart elastomer, named mPEG43-b-(PMBC-co-PCL)n, developed from polyester and polycarbonate blends, that possessed shape memory and self-heal capabilities via a physical crosslinking system. Results: The material demonstrated a significant tensile strength of 0.38 MPa and a tensile ratio of 1155.6%, highlighting its favorable mechanical properties. In addition, a conspicuous shape retrieval rate of 93% was showcased within 32.5 seconds at 37°C. Remarkably, the affected area could be repaired proficiently with no irritation experienced during 6h at room temperature, which was indicative of an admirable repair percentage of 87.6%. Furthermore, these features could be precisely modified by altering the proportion of MBC and ε-CL to suit individual constraints. Discussion: This innovative elastomer with exceptional shape memory and self-heal capabilities provides a solid basis and promising potential for the development of self-contracting intelligent surgical sutures in the biomedical field.

Toward Highly Matching the Dura Mater: A Polyurethane Integrating Biocompatible, Leak-Proof, and Self-Healing Properties

The dura mater is the final barrier against cerebrospinal fluid leakage and plays a crucial role in protecting and supporting the brain and spinal cord. Head trauma, tumor resection and other traumas damage it, requiring artificial dura mater for repair.  However, surgical tears are often unavoidable. To address these issues, the ideal artificial dura mater should have biocompatibility, anti-leakage, and self-healing properties. Herein, this work has used biocompatible polycaprolactone diol as the soft segment and introduced dynamic disulfide bonds into the hard segment, achieving a multifunctional polyurethane (LSPU-2), which integrated the above mentioned properties required in surgery. In particular, LSPU-2 matches the mechanical properties of the dura mater and the biocompatibility tests with neuronal cells demonstrate extremely low cytotoxicity and do not cause any negative skin lesions. In addition, the anti-leakage properties of the LSPU-2 are confirmed by the water permeability tester and the 900 mm H2 O static pressure test with artificial cerebrospinal fluid. Due to the disulfide bond exchange and molecular chain mobility, LSPU-2 could be completely self-healed within 115 min at human body temperature. Thus, LSPU-2 comprises one of the most promising potential artificial dura materials, which is essential for the advancement of artificial dura mater and brain surgery.

High-Performance Branched Polymer Elastomer Based on a Topological Network Structure and Dynamic Bonding

High performance has always been the research focus of elastomers. However, there are inherent conflicts among properties of elastomers, such as strength and toughness, strength and damping performance, strength and self-healing ability, etc. Herein, first, we synthesized a unique structure of the dangling chain containing proton donors and receptors. Then, we design and fabricate a kind of high-performance elastomer with a gradient distribution of a dangling chain and a dynamic bond structure. The dangling chains of different lengths intertwine with each other and self-assemble to form a "dense accumulation" structure driven by hydrogen bonds, and the elastomer exhibits special micro/nano scale aggregated states and microphase separation. The "dense accumulation" structure plays a vital role in the increase of mechanical properties. Meanwhile, under the joint action of a dangling chain and a dynamic bond, the damping performance and self-healing performance of the elastomer are greatly enhanced. High strength (27.5 MPa), toughness (121.9 MJ·m-3), 94.8% healing efficiency and outstanding damping performance (tan δ ≥ 0.4, high damping temperature range up to 144 °C) are simultaneously achieved beyond the current state-of-the-art. This topoarchitected polymer with a gradient distribution of dangling chains successfully solves the defects of conventional branched polymers in deteriorating their mechanical properties. This material design provides a new strategy for the development of high-performance structural and functional integrated elastomers.

Solvent-Free Environmentally Friendly Method to Prepare Thermo-Reversible Fully Bio-Based Elastomers

Most rubber products come from petrochemical resources, which are increasingly in short supply. Rubber products that formed irreversible chemical bonds in the vulcanization process are difficult to recycle, resulting in a serious waste of resources. Therefore, it is important to prepare a kind of reprocessable biobased elastomers. Using furfuryl methacrylate (FMA) as the modified monomer, poly(dibutyl itaconate-myrcene-furfuryl methacrylate) (PDBIMFA) was synthesized by high-temperature emulsion polymerization successfully. The structure and compositions of PDBIMFA were characterized by Fourier transform infrared and 1H NMR, and the effects of different FMA contents on the structures and properties of PDBIMFA were systematically studied. Based on the Diels-Alder reaction, bismaleimide (BMI) and carbon black (CB) were introduced into PDBIMFA as cross-linking agents and reinforcing fillers, respectively, by the melt blending method, and PDBIMFA-BMI elastomer materials and CB/PDBIMFA-BMI elastomer composites with thermo-reversible cross-linking characteristics were prepared. The effects of the ratio of FMA and BMI on the mechanical properties of PDBIMFA-BMI were studied. PDBIMFA-BMI and CB/PDBIMFA-BMI were reprocessed twice, and the recovery rate of tensile strength was both more than 90%. The addition of CB was found to play a reinforcing role in the elastomer and with the introduction of the amount of CB, the reprocessability of composite remained at a good level. It is hoped that this research will provide a new strategy for the sustainable development of bio-based elastomer materials.

Development of a Resilience Parameter for 3D-Printable Shape Memory Polymer Blends

The goal of this paper was to establish a metric, which we refer to as the resilience parameter, to evaluate the ability of a material to retain tensile strength after damage recovery for shape memory polymer (SMP) systems. In this work, three SMP blends created for the additive manufacturing process of fused filament fabrication (FFF) were characterized. The three polymer systems examined in this study were 50/50 by weight binary blends of the following constituents: (1) polylactic acid (PLA) and maleated styrene-ethylene-butylene-styrene (SEBS-g-MA); (2) acrylonitrile butadiene styrene (ABS) and SEBS-g-MA); and (3) PLA and thermoplastic polyurethane (TPU). The blends were melt compounded and specimens were fabricated by way of FFF and injection molding (IM). The effect of shape memory recovery from varying amounts of initial tensile deformation on the mechanical properties of each blend, in both additively manufactured and injection molded forms, was characterized in terms of the change in tensile strength vs. the amount of deformation the specimens recovered from. The findings of this research indicated a sensitivity to manufacturing method for the PLA/TPU blend, which showed an increase in strength with increasing deformation recovery for the injection molded samples, which indicates this blend had excellent resilience. The ABS/SEBS blend showed no change in strength with the amount of deformation recovery, indicating that this blend had good resilience. The PLA/SEBS showed a decrease in strength with an increasing amount of initial deformation, indicating that this blend had poor resilience. The premise behind the development of this parameter is to promote and aid the notion that increased use of shape memory and self-healing polymers could be a strategy for mitigating plastic waste in the environment.

Simple and Efficient Synthesis of Oligoetherdiamines: Hardeners of Epoxyurethane Oligomers for Obtaining Coatings with Shape Memory Effect

In this work, new polymers with a shape memory effect for self-healing coatings based on oligomers with terminal epoxy groups, synthesized from oligotetramethylene oxide dioles of various molecular weights, were developed. For this purpose, a simple and efficient method for the synthesis of oligoetherdiamines with a high yield of the product, close to 94%, was developed. Oligodiol was treated with acrylic acid in the presence of a catalyst, followed by the reaction of the reaction product with aminoethylpiperazine. This synthetic route can easily be upscaled. The resulting products can be used as hardeners for oligomers with terminal epoxy groups synthesized from cyclic and cycloaliphatic diisocyanates. The effect of the molecular weight of newly synthesized diamines on the thermal and mechanical properties of urethane-containing polymers has been studied. Elastomers synthesized from isophorone diisocyanate showed excellent shape fixity and shape recovery ratios of >95% and >94%, respectively.

Innovative Device and Procedure for In Situ Quantification of the Self-Healing Ability and Kinetics of Self-Healing of Polymeric Materials

A new device and procedure for the in situ quantification of the extent of the self-healing and the kinetics of self-healing of polymeric materials were proposed. The device consisted of flowing an inert gas below the sample placed in a hermetically closed chamber. When the sample was perforated/damaged, the gas passed through the hole made in the polymeric material and the gas flow rate declined as the self-healing was produced. Once the gas flow rate stopped, the self-healing was completed. The proposed method was simple, quick, and reproducible, and several in situ self-healing experiments at different temperatures could be performed in the same sample. As a proof of concept, the new device and method have been used for measuring the self-healing ability of different polyurethanes.

Sulfide-Bridged Covalent Quinoxaline Frameworks for Lithium-Organosulfide Batteries

The chelating ability of quinoxaline cores and the redox activity of organosulfide bridges in layered covalent organic frameworks (COFs) offer dual active sites for reversible lithium (Li)-storage. The designed COFs combining these properties feature disulfide and polysulfide-bridged networks showcasing an intriguing Li-storage mechanism, which can be considered as a lithium-organosulfide (Li-OrS) battery. The experimental-computational elucidation of three quinoxaline COFs containing systematically enhanced sulfur atoms in sulfide bridging demonstrates fast kinetics during Li interactions with the quinoxaline core. Meanwhile, bilateral covalent bonding of sulfide bridges to the quinoxaline core enables a redox-mediated reversible cleavage of the sulfursulfur bond and the formation of covalently anchored lithium-sulfide chains or clusters during Li-interactions, accompanied by a marked reduction of Li-polysulfide (Li-PS) dissolution into the electrolyte, a frequent drawback of lithium-sulfur (Li-S) batteries. The electrochemical behavior of model compounds mimicking the sulfide linkages of the COFs and operando Raman studies on the framework structure unravels the reversibility of the profound Li-ion-organosulfide interactions. Thus, integrating redox-active organic-framework materials with covalently anchored sulfides enables a stable Li-OrS battery mechanism which shows benefits over a typical Li-S battery.

Research Progress of Elastomer Materials and Application of Elastomers in Drilling Fluid

An elastomer is a material that undergoes large deformation under force and quickly recovers its approximate initial shape and size after withdrawing the external force. Furthermore, an elastomer can heal itself and increase volume when in contact with certain liquids. They have been widely used as sealing elements and packers in different oil drilling and development operations. With the development of drilling fluids, elastomer materials have also been gradually used as drilling fluid additives in drilling engineering practices. According to the material type classification, elastomer materials can be divided into polyurethane elastomer, epoxy elastomer, nanocomposite elastomer, rubber elastomer, etc. According to the function classification, elastomers can be divided into self-healing elastomers, expansion elastomers, etc. This paper systematically introduces the research progress of elastomer materials based on material type classification and functional classification. Combined with the requirements for drilling fluid additives in drilling fluid application practice, the application prospects of elastomer materials in drilling fluid plugging, fluid loss reduction, and lubrication are discussed. Oil-absorbing expansion and water-absorbing expansion elastomer materials, such as polyurethane, can be used as lost circulation materials, and enter the downhole to absorb water or absorb oil to expand, forming an overall high-strength elastomer to plug the leakage channel. When graphene/nano-composite material is used as a fluid loss additive, flexibility and elasticity facilitate the elastomer particles to enter the pores of the filter cake under the action of differential pressure, block a part of the larger pores, and thus, reduce the water loss, while it would not greatly change the rheology of drilling fluid. As a lubricating material, elastic graphite can form a protective film on the borehole wall, smooth the borehole wall, behaving like a scaly film, so that the sliding friction between the metal surface of the drill pipe and the casing becomes the sliding friction between the graphite flakes, thereby reducing the friction of the drilling fluid. Self-healing elastomers can be healed after being damaged by external forces, making drilling fluid technology more intelligent. The research and application of elastomer materials in the field of drilling fluid will promote the ability of drilling fluid to cope with complex formation changes, which is of great significance in the engineering development of oil and gas wells.

Room-Temperature Self-Healable Blends of Waterborne Polyurethanes with 2-Hydroxyethyl Methacrylate-Based Polymers

The design of self-healing agents is a topic of important scientific interest for the development of high-performance materials for coating applications. Herein, two series of copolymers of 2-hydroxyethyl methacrylate (HEMA) with either the hydrophilic N,N-dimethylacrylamide (DMAM) or the epoxy group-bearing hydrophobic glycidyl methacrylate were synthesized and studied as potential self-healing agents of waterborne polyurethanes (WPU). The molar percentage of DMAM or GMA units in the P(HEMA-co-DMAMy) and P(HEMA-co-GMAy) copolymers varies from 0% up to 80%. WPU/polymer composites with a 10% w/w or 20% w/w copolymer content were prepared with the facile method of solution mixing. Thanks to the presence of P(HEMA-co-DMAMy) copolymers, WPU/P(HEMA-co-DMAMy) composite films exhibited surface hydrophilicity (water contact angle studies), and tendency for water uptake (water sorption kinetics studies). In contrast, the surfaces of the WPU/P(HEMA-co-GMAy) composites were less hydrophilic compared with the WPU/P(HEMA-co-DMAMy) ones. The room-temperature, water-mediated self-healing ability of these composites was investigated through addition of water drops on the damaged area. Both copolymer series exhibited healing abilities, with the hydrophilic P(HEMA-co-DMAMy) copolymers being more promising. This green healing procedure, in combination with the simple film fabrication process and simple healing triggering, makes these materials attractive for practical applications.

Intrinsically Self-Healing Polymers: From Mechanistic Insight to Current Challenges

Self-healing materials open new prospects for more sustainable technologies with improved material performance and devices' longevity. We present an overview of the recent developments in the field of intrinsically self-healing polymers, the broad class of materials based mostly on polymers with dynamic covalent and noncovalent bonds. We describe the current models of self-healing mechanisms and discuss several examples of systems with different types of dynamic bonds, from various hydrogen bonds to dynamic covalent bonds. The recent advances indicate that the most intriguing results are obtained on the systems that have combined different types of dynamic bonds. These materials demonstrate high toughness along with a relatively fast self-healing rate. There is a clear trade-off relationship between the rate of self-healing and mechanical modulus of the materials, and we propose design principles of polymers toward surpassing this trade-off. We also discuss various applications of intrinsically self-healing polymers in different technologies and summarize the current challenges in the field. This review intends to provide guidance for the design of intrinsic self-healing polymers with required properties.

Effects of Amylopectins from Five Different Sources on Disulfide Bond Formation in Alkali-Soluble Glutenin

Wheat, maize, cassava, mung bean and sweet potato starches have often been added to dough systems to improve their hardness. However, inconsistent effects of these starches on the dough quality have been reported, especially in refrigerated dough. The disulfide bond contents of alkali-soluble glutenin (ASG) have direct effects on the hardness of dough. In this paper, the disulfide bond contents of ASG were determined. ASG was mixed and retrograded with five kinds of amylopectins from the above-mentioned botanical sources, and a possible pathway of disulfide bond formation in ASGs by amylopectin addition was proposed through molecular weight, chain length distribution, FT-IR, ¹³C solid-state NMR and XRD analyses. The results showed that when wheat, maize, cassava, mung bean and sweet potato amylopectins were mixed with ASG, the disulfide bond contents of alkali-soluble glutenin increased from 0.04 to 0.31, 0.24, 0.08, 0.18 and 0.29 μmol/g, respectively. However, after cold storage, they changed to 0.55, 0.16, 0.26, 0.07 and 0.19 μmol/g, respectively. The addition of wheat amylopectin promoted the most significant disulfide bond formation of ASG. Hydroxyproline only existed in the wheat amylopectin, indicating that it had an important effect on the disulfide bond formation of ASG. Glutathione disulfides were present, as mung bean and sweet potato amylopectin were mixed with ASG, and they were reduced during cold storage. Positive/negative correlations between the peak intensity of the angles at 2θ = 20°/23° and the disulfide bond contents of ASG existed. The high content of hydroxyproline could be used as a marker for breeding high-quality wheat.

An Environmental-Inert and Highly Self-Healable Elastomer Obtained via Double-Terminal Aromatic Disulfide Design and Zwitterionic Crosslinked Network for Use as a Triboelectric Nanogenerator

Due to the ongoing development of portable/mobile electronics, sources to power have received widespread attention. Compared to chemical batteries as power sources, triboelectric nanogenerators (TENGs) possess lots of advantages, including the ability to harvest energy via human motions, flexible structures, environment-friendliness, and long-life characteristics. Although many self-healable TENGs are reported, the achievement of a muscle-like elasticity and the ability to recover from inevitable damage under extreme conditions (such as a high/low temperature and/or humidity) remain a challenge. Herein, a "double-terminal aromatic disulfide" on a structure with zwitterions as branched chains is reported to engineer the high-efficient self-healable elastomer for application in a flexible TENG. The as-designed material exhibits a repeatable elastic recovery (at 250% elongation) and a self-healing efficiency with an ultimate tensile stress of 96% over 2 h, representing an improvement on previously reported disulfide-based elastomers. The elastomer can autonomously recover by 50% even at a subzero temperature of -30 °C within 24 h. The elastomer-based TENG, as a self-driven sensor for detecting human behavior, is demonstrated to exhibit stable outputs and self-healing in the temperature range of -30 to 60 °C, and so is expected to promote the development of self-powered electronics for next-generation human-machine communications.

Magnetic vitrimer-based soft robotics

Magnetically responsive elastomers, consisting of elastomer embedded with magnetic particles, can produce fast and reversible actuation when subjected to a magnetic field. They have been extensively explored to construct versatile remotely controllable soft robots. Nevertheless, the magnetically induced actuation strain in elastomers is typically small, which limits its broad applications. Recently, magnetic particles have been mixed with viscous fluids to enable giant magnetically induced deformations. However, their response speed is slow and the actuation is usually irreversible. In this work, we have developed a magnetic vitrimer (MV), with magnetic particles mixed with the polymer network containing abundant dynamic covalent bonds. At room temperature, the MV behaves like a regular magnetically responsive elastomer. When the temperature is elevated to the exchange reaction temperature of the dynamic covalent bonds, the material behaves like a viscous magnetically responsive fluid, which can produce large deformations. The embedded magnetic particles and the vitrimer matrix also make the material self-healable without requiring any direct touch. We have demonstrated that with the guidance of an externally applied magnetic field, a MV-based soft robot can pass through a confined space, dramatically change its configuration, self-heal without any contact, catch, secure and release a fast-moving object, and move along a planned path.

Bionic Synthesis of Mussel-like Adhesive L-DMA and Its Effects on Asphalt Properties

Cracks are inevitable during the service life of asphalt pavement and the water at the fracture surfaces tends to cause the grouting materials to fail. Studies have shown that the catechol groups in adhesion proteins secreted by mussels can produce strong adhesion performance in the water. In this paper, the mussel-like adhesive L-Dopa Methacrylic anhydride (L-DMA) was prepared based on the concept of bionic design and used to improve the properties of asphalt. By using Fourier-transform infrared spectroscopy (FTIR) and Thermogravimetric analysis (TGA), the thermal stability and structural composition of L-DMA were investigated. Then, the rheological and low-temperature properties of L-DMA-modified asphalt were investigated using the dynamic shear rheological (DSR) test and bending beam rheological (BBR) test. Moreover, the modification mechanism was explored by FTIR. It was found that L-DMA can be effectively synthesized and has good thermal stability. The incorporation of L-DMA increases the composite modulus, viscosity, creep recovery rate and rutting factor of asphalt binder, resulting in an enhancement of its high-temperature performance. At a high L-DMA content of 10%, the low-temperature performance of the modified asphalt was enhanced. The modification of L-DMA to asphalt is mainly a physical process. Hydrogen bonds and conjugated systems generated by the introduction of catechol groups enhance the adhesion properties of asphalt. In general, L-DMA improves the properties of asphalt and theoretically can improve the water resistance of asphalt, which will be explored in future research.

Glycidyl Methacrylate-Based Copolymers as Healing Agents of Waterborne Polyurethanes

Self-healing materials and self-healing mechanisms are two topics that have attracted huge scientific interest in recent decades. Macromolecular chemistry can provide appropriately tailored functional polymers with desired healing properties. Herein, we report the incorporation of glycidyl methacrylate-based (GMA) copolymers in waterborne polyurethanes (WPUs) and the study of their potential healing ability. Two types of copolymers were synthesized, namely the hydrophobic P(BA-co-GMAy) copolymers of GMA with n-butyl acrylate (BA) and the amphiphilic copolymers P(PEGMA-co-GMAy) of GMA with a poly(ethylene glycol) methyl ether methacrylate (PEGMA) macromonomer. We demonstrate that the blending of these types of copolymers with two WPUs leads to homogenous composites. While the addition of P(BA-co-GMAy) in the WPUs leads to amorphous materials, the addition of P(PEGMA-co-GMAy) copolymers leads to hybrid composite systems varying from amorphous to semi-crystalline, depending on copolymer or blend composition. The healing efficiency of these copolymers was explored upon application of two external triggers (addition of water or heating). Promising healing results were exhibited by the final composites when water was used as a healing trigger.

Dynamic Covalent Bond Cross-linked Luminescent Silicone Elastomer with Self-healing and Recyclable Property

Two aldehyde-modified tetraphenylene derivatives with different functionality are synthesized and exhibit different fluorescence properties. By incorporating tetraphenylene derivatives into polydimethylsiloxane (PDMS) networks, two elastomers are prepared through dynamic covalent crosslinking. The elastomers show excellent fluorescence properties, mechanical properties, thermal stability as well as self-healing and recycle properties. At the same time, the mechanical properties of the elastomers are influenced by the functionality of the tetraphenylene derivatives and the molecular weight of the PDMS. The self-healing process take place quickly and the recycling process can be carried out by solution processing and hot pressing. It shows the similar tensile properties between the prisitine and healed samples. This article is protected by copyright. All rights reserved.

Photoswitchable Covalent Adaptive Networks Based on Thiol-Ene Elastomers

Covalent adaptive networks combine the advantages of cross-linked elastomers and dynamic bonding in a single system. In this work, we demonstrate a simple one-pot method to prepare thiol-ene elastomers that exhibit reversible photoinduced switching from an elastomeric gel to fluid state. This behavior can be generalized to thiol-ene cross-linked elastomers composed of different backbone chemistries (e.g., polydimethylsiloxane, polyethylene glycol, and polyurethane) and vinyl groups (e.g., allyl, vinyl ether, and acrylate). Photoswitching from the gel to fluid state occurs in seconds upon exposure to UV light and can be repeated over at least 180 cycles. These thiol-ene elastomers also exhibit the ability to heal, remold, and serve as reversible adhesives.

Gentamicin-thioctic acid multifunctional hydrogel for accelerating infected wound healing

Bacterial infections remain a major concern during wound healing and tissue bonding. The excessive proliferation of bacteria will seriously hinder the repair of wound and even lead to death. Generally,...

Thermal-Triggered Dynamic Disulfide Bond Self-Heals Inorganic Perovskite Solar Cells

One great challenge for perovskite solar cells (PSCs) lies in their poor operational stability under harsh stimuli by humidity, heat, light, etc . Herein, a thermal-triggered self-healing polyurethane (PU) is tailored to simultaneously improve the efficiency and stability of inorganic CsPbIBr 2 PSC. The dynamic covalent disulfide bonds between adjacent molecule chains in PU at high temperatures self-heal the in-service formed defects within CsPbIBr 2 perovskite film. Finally, the best device free of encapsulation achieves a champion efficiency up to 10.61% and an excellent long-term stability in air atmosphere over 80 days and persistent heat attack (85 o C) over 35 days. Moreover, the photovoltaic performances are recovered by a simple heat treatment.

Incorporation of an Emissive Cu4I4 Core into Cross-Linked Networks: An Effective Strategy for Luminescent Organic-Inorganic Hybrid Coatings

Here, an effective strategy for the preparation of luminescent organic-inorganic hybrid coatings (OIHCs) by the incorporation of an emissive Cu₄I₄ core into cross-linked coating networks through coordination bonds is reported. The luminescent coatings obtained show potential application in a variety of areas, and such a synthetic strategy of the incorporation of an emissive inorganic core into extended networks has proven to be an efficient method for the synthesis of luminescent OIHCs.

Instantaneous Degelling Thermoresponsive Hydrogel

Responsive polymeric hydrogels have found wide application in the clinic as injectable, biocompatible, and biodegradable materials capable of controlled release of therapeutics. In this article, we introduce a thermoresponsive polymer hydrogel bearing covalent disulfide bonds. The cold aqueous polymer solution forms a hydrogel upon heating to physiological temperatures and undergoes slow degradation by hydrolytic cleavage of ester bonds. The disulfide functionality allows for immediate reductive cleavage of the redox-sensitive bond embedded within the polymer structure, affording the option of instantaneous hydrogel collapse. Poly(ethylene glycol)-b-poly(lactic acid)-S-S-poly(lactic acid)-b-poly(ethylene glycol) (PEG-PLA-SS-PLA-PEG) copolymer was synthesized by grafting PEG to PLA-SS-PLA via urethane linkages. The aqueous solution of the resultant copolymer was a free-flowing solution at ambient temperatures and formed a hydrogel above 32 °C. The immediate collapsibility of the hydrogel was displayed via reaction with NaBH4 as a relatively strong reducing agent, yet stability was displayed even in glutathione solution, in which the polymer degraded slowly by hydrolytic degradation. The polymeric hydrogel is capable of either long-term or immediate degradation and thus represents an attractive candidate as a biocompatible material for the controlled release of drugs.

Thiol- and Disulfide-Based Stimulus-Responsive Soft Materials and Self-Assembling Systems

Properties and applications of synthetic thiol- and disulfide-based materials, principally polymers, are reviewed. Emphasis is placed on soft and self-assembling materials in which interconversion of the thiol and disulfide groups initiates stimulus-responses and/or self-healing for biomedical and non-biomedical applications.

Novel Self-Healing Metallocopolymers with Pendent 4-Phenyl-2,2':6',2″-terpyridine Ligand: Kinetic Studies and Mechanical Properties

We report here our successful attempt to obtain self-healing supramolecular hydrogels with new metal-containing monomers (MCMs) with pendent 4-phenyl-2,2′:6′,2″-terpyridine metal complexes as reversible moieties by free radical copolymerization of MCMs with vinyl monomers, such as acrylic acid and acrylamide. The resulting metal-polymer hydrogels demonstrate a developed system of hydrogen, coordination and electron-complementary π–π stacking interactions, which play a critical role in achieving self-healing. Kinetic data show that the addition of a third metal-containing comonomer to the system decreases the initial polymerization rate, which is due to the specific effect of the metal group located in close proximity of the active center on the growth of radicals.

Biobased Nonisocyanate Polyurethanes as Recyclable and Intrinsic Self-Healing Coating with Triple Healing Sites

Polymer coatings having high amounts of renewable carbon and self-healing properties are highly sought after in a sustainability perspective. We report here the development of bio-/CO₂-derived nonisocyanate polyurethane (NIPU) coatings which are recyclable and healable via three different types of healing mechanisms. These NIPUs contain furan rings in their main chain which after cross-linking with bismaleimides form organogels having a thermo-reversible sol-gel transition and solvent-borne coatings with improved properties. Judicial selection of the bismaleimide cross-linker structure enabled us to produce recyclable and intrinsic healable coatings mediated by heat (thermo-healing), moisture (moisture-healing), and, more interestingly, dry conditions at room temperature (self-healing). The intrinsic moisture-healing property of NIPU-based coatings is unprecedented and is mainly due to the presence of hydroxyl functionalities in the NIPU structure. The uniqueness of these cross-linked biobased NIPU as recyclable coatings having triple healing sites present in their structure gives these materials potential for sustainable and functional applications.