Evolution of supramolecular healable composites: a minireview

Synthesis and Evaluation of a Silver Nanoparticle/Polyurethane Composite That Exhibits Antiviral Activity against SARS-CoV-2

In this proof-of-concept study, we aim to produce a polyurethane (PU)-based composite that can reduce the amount of viable SARS-CoV-2 virus in contact with the surface of the polymeric film without further interventions such as manual cleaning. Current protocols for maintaining the hygiene of commonly used touchpoints (door handles, light switches, shop counters) typically rely on repeated washing with antimicrobial products. Since the start of the SARS-CoV-2 pandemic, frequent and costly surface sanitization by workers has become standard procedure in many public areas. Therefore, materials that can be retrofitted to touchpoints, yet inhibit pathogen growth for extended time periods are an important target. Herein, we design and synthesise the PU using a one-pot synthetic procedure on a multigram scale from commercial starting materials. The PU forms a robust composite thin film when loaded with 10 wt% silver nanoparticles (AgNPs). The addition of AgNPs increases the ultimate tensile strength, modules of toughness and modulus of elasticity at the cost of a reduced elongation at break when compared to the pristine PU. Comparative biological testing was carried out by the addition of pseudotyped virus (PV) bearing the SARS-CoV-2 beta (B.1.351) VOC spike protein onto the film surfaces of either the pristine PU or the PU nanocomposite. After 24 h without further human intervention the nanocomposite reduced the amount of viable virus by 67% (p = 0.0012) compared to the pristine PU treated under the same conditions. The significance of this reduction in viable virus load caused by our nanocomposite is that PUs form the basis of many commercial paints and coatings. Therefore, we envisage that this work will provide the basis for further progress towards producing a retrofittable surface that can be applied to a wide variety of common touchpoints.

Alginate-based self-healing hydrogels assembled by dual cross-linking strategy: Fabrication and evaluation of mechanical properties

One way to enhance the poor mechanical properties of the self-healing hydrogels based on host-guest (HG) interaction is employing the dual cross-linking method. Here, the alginate-based hydrogels based on HG complexation were prepared through the modification of alginate (ALG) polysaccharide with beta-cyclodextrin (βCD) and adamantane (Ad) as host and guest groups with different grafting values, respectively. The porous structure was confirmed for all ALG-CD:ALG-Ad hydrogels. The average pore size of ALG-CD₁:ALG-Ad₁ hydrogel cross-linked by HG interactions was 288 μm. Mechanical properties of the alginate-based HG hydrogels were improved by incorporating Ca²⁺ ions in their structure through dual cross-linking methodology. The maximum modulus of the porous dual-crosslinked hydrogel was reached up to 6500 Pa. The healing time of less than 5 s was obtained for the alginate-based hydrogels. The fabricated hydrogels can be used in 3D printing, tissue engineering, and drug delivery systems due to their biocompatibility and shear-thinning behavior.

Fabrication of an antibacterial hydrogel nanocomposite with self-healing properties using ZnO/β-cyclodextrin dimer/modified alginate

The development of self-healing materials with the ability to repair damage has received considerable attention.

Hydrogen bonding derived self-healing polymer composites reinforced with amidation carbon fibers

Self-healing polymer materials (SHPM) have aroused great interests in recent years. Ideal SHPM should have not only simple operations, but also high elongations at break, tensile strain and self-healing properties at room temperature. Herein, the amidated carbon fibers (CFs) reinforced self-healing polymer composites were designed by hydrogen bonding interaction between functionalized CFs and hyperbranched polymers. The amidated CFs were prepared by transformation of hydroxyl to acylamino through a one-step amidation. By introducing amidated CFs, amidated CFs self-healing polymer composites (called AD-CF) exhibited many desirable characteristics compared to pure polymer composites, such as a better elasticity, lower healing temperatures, and higher self-healing efficiencies. The stress-strain test was selected to carefully study the self-healing property of the AD-CF. The observed same recovery condition, i.e. without any mechanical breakdown after the 10 sequential cycles of cutting and healing indicates no aging of the AD-CF. The ability of AD-CF to exhibit a soft state and rapid self-healing at room temperature makes it possible for much wider applications.

Supramolecular self-assembly of chiral polyimides driven by repeat units and end groups

Complementary aromatic π–π stacking and hydrogen bonding induce time-dependent chiroptical spectroscopic behaviours of l-phenylalaninate-derived chiral polyimide.

Spontaneously Healable Thermoplastic Elastomers Achieved through One-Pot Living Ring-Opening Metathesis Copolymerization of Well-Designed Bulky Monomers

We report here a series of novel spontaneously healable thermoplastic elastomers (TPEs) with a combination of improved mechanical and good autonomic self-healing performances. Hard-soft diblock and hard-soft-hard triblock copolymers with poly[exo-1,4,4a,9,9a,10-hexahydro-9,10(1',2')-benzeno-l,4-methanoanthracene] (PHBM) as the hard block and secondary amide group containing norbornene derivative polymer as the soft block were synthesized via living ring-opening metathesis copolymerization by use of Grubbs third-generation catalyst through sequential monomer addition. The microstructure, mechanical, self-healing, and surface morphologies of the block copolymers were thoroughly studied. Both excellent mechanical performance and self-healing capability were achieved for the block copolymers because of the interplayed physical cross-link of hard block and dynamic interaction formed by soft block in the self-assembled network. Under an optimized hard block (PHBM) weight ratio of 5%, a significant recovery of tensile strength (up to 100%) and strain at break (ca. 85%) was achieved at ambient temperature without any treatment even after complete rupture. Moreover, the simple reaction operations and well-designed monomers offer versatility in tuning the architectures and properties of the resulting block copolymers.

Self-healing polymer materials constructed by macrocycle-based host-guest interactions

Self-healing polymers, which can spontaneously recover themselves after being ruptured, result in enhanced lifetimes for materials and open up a fascinating direction in material science. Macrocycle-based host-guest interactions, one of the most crucial non-covalent interactions, play a key role in self-healing material fabrication. This review aims to highlight the very recent and important progress made in the area of self-healing polymer materials by focusing on cyclodextrins (CDs), crown ethers, cucurbit[n]urils (CBs), calix[n]arenes and pillar[n]arenes with special guest groups and tailored structures. In addition, we also propose future research directions and hope that this review can in a way reflect the current situation and future trends in this developing area.