Chitosan for wastewater treatment

Environmentally Benign Freeze-dried Biopolymer-Based Cryogels for Textile Wastewater Treatments: A review

Motivated by sustainability and environmental protection, great efforts have been paid towards water purification and attaining complete decolorization and detoxification of polluted water effluent. Textile effluent, the main participant in water pollution, is a complicated mixture of toxic pollutants which seriously impact human health and the entire ecosystem. Developing effective materials for potential removal of the water contaminants is urgent. Recently, cryogels have been applied in wastewater sectors due to their unique physiochemical attributes(e.g. high surface area, lightweight, porosity, swelling-deswelling, and high permeability). These features robustly affected the cryogel's performance, as adsorbent material, particularly in wastewater sectors. This review serves as a detailed reference to the cryogels derived from biopolymers and applied as adsorbents for the purification of textile drainage. We displayed an overview of: the existing contaminants in textile effluents (dyes and heavy metals), their sources, and toxicity; advantages and disadvantages of the most common treatment techniques (biodegradation, advanced chemical oxidation, membrane filtration, coagulation/flocculation, adsorption). A simple background about cryogels (definition, cryogelation technique, significant features as adsorbents, and the adsorption mechanisms) is also discussed. Finally, the bio-based cryogels dependent on biopolymers such as chitosan, xanthan, cellulose, PVA, and PVP, are fully discussed with evaluating their maximum adsorption capacity.

A review on the role of pH-sensitive natural pigments in biopolymers based intelligent food packaging films

As food packaging evolves, consumer interests are shifting from traditional to intelligent food packaging systems. Intelligent packaging includes active components that display changes in a visual or interactive form perceivable by consumers. This offers real-time monitoring of the quality and shelf life of the packaged food and enhances transparency. For example, pH-sensitive natural pigment-based films change color in response to variations in pH levels, enabling the film/labels to reflect alterations in the acidity or basicity of the food inside the package. Natural pigments like anthocyanins, curcumin, betalains, chlorophyll, and carotenoids have been comprehensively reported for developing biodegradable pH-sensitive films of starch, protein, chitosan, and cellulose. Natural pigments offer great compatibility with these biopolymers and improve the other performance parameters of the films. However, these films still lack the strength and versatility of petroleum-based synthetic plastic films. But these films can be used as an indicator and combined with primary packaging to monitor freshness, time-temperature, and leak for muscle foods, dairy products, fruits and vegetables, and bakery products. Therefore, this review provides a detailed overview of pH-sensitive pigments, their compatibility with natural polymers, their role in film performance in monitoring, and their food packaging applications.

Polyelectrolytes for Environmental, Agricultural, and Medical Applications

In recent decades, polyelectrolytes (PELs) have attracted significant interest owing to a surge in research dedicated to the development of new technologies and applications at the biological level. Polyelectrolytes are macromolecules of which a substantial portion of the constituent units contains ionizable or ionic groups. These macromolecules demonstrate varied behaviors across different pH ranges, ionic strengths, and concentrations, making them fascinating subjects within the scientific community. The aim of this review is to present a comprehensive survey of the progress in the application studies of polyelectrolytes and their derivatives in various fields that are vital for the advancement, conservation, and technological progress of the planet, including agriculture, environmental science, and medicine. Through this bibliographic review, we seek to highlight the significance of these materials and their extensive range of applications in modern times.

Chitosan as a Bio-Based Ligand for the Production of Hydrogenation Catalysts

Bio-based polymers are attracting increasing interest as alternatives to harmful and environmentally concerning non-biodegradable fossil-based products. In particular, bio-based polymers may be employed as ligands for the preparation of metal nanoparticles (M(0)NPs). In this study, chitosan (CS) was used for the stabilization of Ru(0) and Rh(0) metal nanoparticles (MNPs), prepared by simply mixing RhCl3 × 3H2O or RuCl3 with an aqueous solution of CS, followed by NaBH4 reduction. The formation of M(0)NPs-CS was confirmed by Fourier Transform Infrared Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Thermal Gravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray Analysis (EDX), Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD). Their size was estimated to be below 40 nm for Rh(0)-CS and 10nm for Ru(0)-CS by SEM analysis. M(0)NPs-CS were employed for the hydrogenation of (E)-cinnamic aldehyde and levulinic acid. Easy recovery by liquid-liquid extraction made it possible to separate the catalyst from the reaction products. Recycling experiments demonstrated that M(0)NPs-CS were highly efficient up to four times in the best hydrogenation conditions. The data found in this study show that CS is an excellent ligand for the stabilization of Rh(0) and Ru(0) nanoparticles, allowing the production of some of the most efficient, selective and recyclable hydrogenation catalysts known in the literature.

Chitosan-assisted self-assembly of flower-shaped ε-Fe2O3 nanoparticles on screen-printed carbon electrode for Impedimetric detection of Cd2+, Pb2+, and Hg2+ heavy metal ions in various water samples

This study focuses on the fabrication of a novel sensing platform on a screen-printed carbon electrode, modified by a combination of hydrothermally synthesized iron dioxide (ε-Fe2O3) nanoparticles and Chitosan (CS) biopolymer. This unique organic-inorganic hybrid material was developed for Electrochemical Impedance Spectroscopy (EIS) sensing, specifically targeting heavy metal ions that include Hg2+, Cd2+, as well as Pb2+. The investigation encompassed a comprehensive analysis of various aspects of the prepared Fe2O3 and CS/ε-Fe2O3 nanocomposites, including phase identification, determination of crystallite size, assessment of surface morphology, etc. CS/ε-Fe2O3 was drop-casted and deposited on the Screen-Printed Electrode (SPE). The resulting sensor exhibited excellent performance in the precise and selective quantification of Hg2+, Cd2+, and Pb2+ ions, with minimal interference from other substances. The fabricated sensor exhibits excellent performance as the detection range for Hg2+, Cd2+, and Pb2+ ions linearity is 2-20 μM, sensitivity, and LOD are 243 Ω/ μM cm2 and 0.191 μM, 191 Ω/μM cm2, and 0.167 μM, 879 Ω/ μM cm2, and 0.177 μM respectively. The stability of the CS/ε-Fe2O3/SPE electrode is demonstrated by checking its conductivity for up to 60 days for Hg2+, Cd2+, and Pb2+ ions. The reusability of the fabricated electrode is 14 scans, 13 scans, and 12 scans for Hg2+, Cd2+, and Pb2+ ions respectively. The findings indicate the successful development of an innovative CS/ε-Fe2O3 electrode for the EIS sensing platform. This platform demonstrates notable potential for addressing the critical need for efficient and sensitive EIS sensors capable of detecting a range of hazardous heavy metal ions, including Hg2+, Cd2+, and Pb2+.

Analysis and remediation of phthalates in aquatic matrices: current perspectives

Phthalic acid esters (PAEs) are high production volume chemicals used extensively as plasticizers, to increase the flexibility of the main polymer. They are reported to leach into their surroundings from plastic products and are now a ubiquitous environmental contaminant. Phthalate levels have been determined in several environmental matrices, especially in water. These levels serve as an indicator of plasticizer abuse and plastic pollution, and also serve as a route of exposure to different species including humans. Reports published on effects of different PAEs on experimental models demonstrate their carcinogenic, teratogenic, reproductive, and endocrine disruptive effects. Therefore, regular monitoring and remediation of environmental water samples is essential to ascertain their hazard quotient and daily exposure levels. This review summarises the extraction and detection techniques available for phthalate analysis in water samples such as chromatography, biosensors, immunoassays, and spectroscopy. Current remediation strategies for phthalate removal such as adsorption, advanced oxidation, and microbial degradation have also been highlighted.

Chitosan in the treatment of mine spoil rainwater - An approach to protect the aquatic biota

The mining industry suppresses vegetation, exposing large soil areas in its ordinary operation. Water pollution and turbidity are caused by the carrying of solids, mainly colloidal particles, to the watercourses due to the effect of rainfall events. Therefore, the discharge of those effluents will lead to failure with watercourse quality parameters. Thus, there is a need to treat drainages (rainwaters) from the mining industry. However, using common coagulants and flocculants can result in acute or chronic ecotoxicity for aquatic biota. In this scenario, this research aimed to evaluate using a natural coagulant, the biopolymer Chitosan, to remove turbidity from mining industry spoiled water through bio-coagulation. The ecotoxicity of the natural coagulant was compared to the commonly used coagulants. For this purpose, we used synthetic rainwater (SRW) from the dispersion of fine (colloidal) particles in natural waters. Materials (water and soil) were collected in the mining area's sumps (sedimentation basins). The turbidity of the produced SRW ranged from between 500 and 4000 NTU. Jar Tests using Chitosan (CTS), polyaluminum chloride (PAC®12), and Superfloc®N100 variable doses were carried out to compare the effects of the coagulating/flocculating agents on the SRW turbidity reduction. The obtained results demonstrated the efficiency of CHS on turbidity reduction. The results were encouraging for low turbidity samples (<1000 NTU), making it possible to meet the limit parameters recommended by the Brazilian legislation. In addition, it was possible to conclude both CHS and the effluents treated with this coagulant have lower toxicity to aquatic biota than the combination of PAC®12 and Superfloc®N100.

Removal of emergent pollutants: A review on recent updates and future perspectives on polysaccharide-based composites vis-à-vis traditional adsorbents

There is a growing incidence in the presence of emergent pollutants like the pesticides and pharmaceuticals in water bodies. The matter of environmental concern is their synthetic and persistent nature which has resulted in induced toxicity/damaging effect to the vital functioning of the different organs in the aquatic community. Traditional adsorbents have exhibited limitations like low stability and minimum reuse ability. Composites of such adsorbents with polysaccharides have demonstrated distinct features like improved surface area, porosity, adsorptivity; improved reusability and structural integrity; improved mechanical strength, thermal stability when applied for the removal of the emergent pollutants. The biocompatibility and biodegradability of such fabricated composites is established; thereby making the water treatment process cost effective, sustainable and environmentally friendly. The present review has dealt with an in-depth, up-dated literature compilation of traditional as well as polysaccharide based composite adsorbents and addressed their performance evaluation for the removal of pharmaceuticals and pesticides from wastewater. A comparative study has revealed the merits of polysaccharide based composites and discussions have been made with a focus on future research directions in the related area.

Synthesis and characterization of bio-nanocomposite based on chitosan and CaCO3 nanoparticles for heavy metals removal

Water is a vital component of life; therefore, it is critical to have access to pure water for various life-sustaining activities including agriculture and human consumption. An eco-friendly nanocomposite based on chitosan (Cs) and nanomaterials (CaCO3-NPs) were combined to amalgamate the advantages of biopolymers and nanomaterials to overcome the problems of instability, poor mechanical properties, and low removal percentage of biopolymers. The as-prepared samples were characterized and were used for the removal of heavy metal from wastewater. X-ray diffractometer, Fourier transform infrared spectroscopy, and transmission electron microscope were used to distinguish the prepared absorbents. The absorption of the heavy metals by as-prepared samples was examined at different conditions. The kinetic and isotherm models of the adsorption process were also studied. The data showed that the removal percentages of Cd, Cu, Pb, Zn, Cr and Ni by the composite were 98.0, 94.8, 99.0, 97.9, 97.4 and 98.3 %, respectively. The kinetic and isothermal studies showed that the absorption of these metal ions by the samples obeyed a pseudo-second-order mechanism and Langmuir isotherm model, respectively. In addition, the maximum adsorption capacities of Cd, Cu, Pb, Zn, Cr, and Ni ions by as-prepared nanocomposite were 83.33, 47.84, 98.03, 89.28, 62.11, and 63.69 mg/g, respectively.

Molecular dynamics simulations of the solubility and conformation change of chitosan grafted polyacrylamide: Impact of grafting rate

Graft modification is an effective approach to improve the water solubility and molecular weight of chitosan. This work investigated the effect of grafting rate on water solubility of chitosan-grafted polyacrylamide (Chi-g-PAM) using molecular dynamics simulations. The intramolecular and intermolecular interaction between Chi-g-PAM with the grafting rate of 100%-250% and water together with the conformation change were analyzed by radial distribution function (RDF), radius of gyration, solvation free energy (ΔGSFE), mean square displacement, diffusion coefficient and shear viscosity. The results showed that the intramolecular hydrogen bonding of Chi-g-PAM was the dominant factor affecting its water solubility. While the grafting rate of Chi-g-PAM increased from 100% to 250%, the RDF of Chi-g-PAM decreased from 5.39 to 3.57 between O-H at 2.0 Å and 2.60 to 1.30 between N-H at 2.1 Å. The interaction between Chi-g-PAM and water increased with grafting rate as the absolute value of ΔGSFE for Chi-g-PAM increased from 432.917 kcal/mol to 858.749 kcal/mol. The solubility of Chi-g-PAM in acidic solution was much better than that of Chi-g-PAM in aqueous solution. Our work on the fundamental insights into the effect of grafted molecular structure of chitosan-based copolymer on its solubility will benefit the development of environmentally friendly chitosan-based flocculants.

Animal derived biopolymers for food packaging applications: A review

It is essential to use environment-friendly, non-toxic, biodegradable and sustainable materials for various applications. Biopolymers are derived from renewable sources like plants, microorganisms, and agricultural wastes. Unlike conventional polymers, biopolymer has a lower carbon footprint and contributes less to greenhouse gas emission. All biopolymers are biodegradable, meaning natural processes can break them down into harmless products such as water and biomass. This property is of utmost importance for various sustainable applications. This review discusses different classifications of biopolymers based on origin, including plant-based, animal-based and micro-organism-based biopolymers. The review also discusses the desirable properties that are required in materials for their use as packaging material. It also discusses the different processes used in modifying the biopolymer to improve its properties. Finally, this review shows the recent developments taking place in using specifically animal origin-based biopolymer and its use in packaging material. It was observed that animal-origin-based biopolymers, although they possess unique properties however, are less explored than plant-origin biopolymers. The animal-origin-based biopolymers covered in this review are chitosan, gelatin, collagen, keratin, casein, whey, hyaluronic acid and silk fibroin. This review will help in renewing research interest in animal-origin biopolymers. In summary, biopolymer offers a sustainable and environment-friendly alternative to conventional polymers. Their versatility, biocompatibility will help create a more sustainable future.

Synthesis and characterization of peanut hull modified chitosan beads

The incorporation of plant materials is an effective method to improve the stability of chitosan beads, as it further increases the adsorption of toxic dyes and metals from aqueous systems. In the present study, chitosan gels were impregnated with a novel type of powder as the groundnut hull powder in order to form composite beads by using a simple droplet-based microfluidic system. The beads were then characterised through various techniques such as SEM, TGA, FTIR, and XRD. Microscopic imaging revealed a change in the surface morphology of the composite beads, which became rough and wrinkled with more valley-like features and irregular cracks. FTIR data suggest that the impregnation of groundnut hull powder led to an increase in functional groups. The thermal analysis allowed for the assessment of composite bead hydration contents and indicated the presence of groundnut hull entrapped in the loaded beads, which was corroborated by vibrational spectroscopy. XRD analysis allows us to conclude that there is an involvement of groundnut hull in the chitosan gels, and the consequence of that is the formation of amorphous beads, which would make them suitable for the adsorption of toxic dyes and metals from water systems.

A comprehensive review of chitosan applications in paper science and technologies

Using environmentally friendly biomaterials in different aspects of human life has been considered extensively. In this respect, different biomaterials have been identified and different applications have been found for them. Currently, chitosan, the well-known derivative of the second most abundant polysaccharide in the nature (i.e., chitin), has been receiving a lot of attention. This unique biomaterial can be defined as a renewable, high cationic charge density, antibacterial, biodegradable, biocompatible, non-toxic biomaterial with high compatibility with cellulose structure, where it can be used in different applications. This review takes a deep and comprehensive look at chitosan and its derivative applications in different aspects of papermaking.

Biomimetic biphasic scaffolds in osteochondral tissue engineering: Their composition, structure and consequences

Approaches to the design and construction of biomimetic scaffolds for osteochondral tissue, show increasing advances. Considering the limitations of this tissue in terms of repair and regeneration, there is a need to develop appropriately designed scaffolds. A combination of biodegradable polymers especially natural polymers and bioactive ceramics, shows promise in this field. Due to the complicated architecture of this tissue, biphasic and multiphasic scaffolds containing two or more different layers, could mimic the physiology and function of this tissue with a higher degree of similarity. The purpose of this review article is to discuss the approaches focused on the application of biphasic scaffolds for osteochondral tissue engineering, common methods of combining layers and the ultimate consequences of their use in patients were discussed.

Polyols and Polyurethane Foams Based on Water-Soluble Chitosan

At present, majority of polyols used in the synthesis of polyurethane foams are of petrochemical origin. The decreasing availability of crude oil imposes the necessity to convert other naturally existing resources, such as plant oils, carbohydrates, starch, or cellulose, as substrates for polyols. Within these natural resources, chitosan is a promising candidate. In this paper, we have attempted to use biopolymeric chitosan to obtain polyols and rigid polyurethane foams. Four methods of polyol synthesis from water-soluble chitosan functionalized by reactions of hydroxyalkylation with glycidol and ethylene carbonate with variable environment were elaborated. The chitosan-derived polyols can be obtained in water in the presence of glycerol or in no-solvent conditions. The products were characterized by IR, 1H-NMR, and MALDI-TOF methods. Their properties, such as density, viscosity, surface tension, and hydroxyl numbers, were determined. Polyurethane foams were obtained from hydroxyalkylated chitosan. The foaming of hydroxyalkylated chitosan with 4,4′-diphenylmethane diisocyanate, water, and triethylamine as catalysts was optimized. The four types of foams obtained were characterized by physical parameters such as apparent density, water uptake, dimension stability, thermal conductivity coefficient, compressive strength, and heat resistance at 150 and 175 °C. It has been found that the obtained materials had most of the properties similar to those of classic rigid polyurethane foams, except for an increased thermal resistance up to 175 °C. The chitosan-based polyols and polyurethane foams obtained from them are biodegradable: the polyol is completely biodegraded, while the PUF obtained thereof is 52% biodegradable within 28 days in the soil biodegradation oxygen demand test.

Chitosan as a Promising Support of a CDH Activity Preservation System for Biomedical and Industrial Applications

Cellobiose dehydrogenase (CDH) is an extracellular hemoflavoprotein catalyzing the oxidation reaction of β-1,4-glycosidic-bonded sugars (lactose or cellobiose), which results in the formation of aldobionic acids and hydrogen peroxide as a byproduct. The biotechnological application of CDH requires the immobilization of the enzyme on a suitable support. As a carrier of natural origin used for CDH immobilization, chitosan seems to increase the catalytic potential of the enzyme, especially for applications as packaging in the food industry and as a dressing material in medical applications. The present study aimed to immobilize the enzyme on chitosan beads and determine the physicochemical and biological properties of immobilized CDHs obtained from different fungal sources. The chitosan beads with immobilized CDHs were characterized in terms of their FTIR spectra or SEM microstructure. The most effective method of immobilization in the proposed modification was the covalent bonding of enzyme molecules using glutaraldehyde, resulting in efficiencies ranging from 28 to 99%. Very promising results, compared to free CDH, were obtained in the case of antioxidant, antimicrobial, and cytotoxic properties. Summarizing the obtained data, chitosan seems to be a valuable material for the development of innovative and effective immobilization systems for biomedical applications or food packaging, preserving the unique properties of CDH.

A New Approach for Dye Removal with a Polymer: Removal of Acid Orange 12 from Aqueous Solution with Shrimp Chitin

Chitin, a naturally abundant mucopolysaccharide, is the supporting material of crustaceans, insects, and etc. Chitin and its main derivative chitosan have various applications in medicine, pharmacy, biotechnology, environment, and food engineering because of their nontoxicity, biodegradability, biocompatibility, antimicrobial, and antioxidant properties. Here, research was conducted on the removal of Acid Orange 12, which is among the most used azo dyes in textiles, from aqueous solutions using shrimp chitin, a polymer. To determine the most suitable conditions, different parameters (pH degrees, amount of chitin, amount of dye, contact time) were studied. Chitin was determined to be the most efficient in removing Acid Orange 12 using pH 5 conditions. The adsorption of dye onto chitin followed the Langmuir isotherm and pseudo-second-order kinetic model.

Removal of Heavy Metal Ions from Wastewater with Poly-ε-Caprolactone-Reinforced Chitosan Composite

Currently, the requirements for adsorbent materials are based on their environmentally friendly production and biodegradability. However, they are also related to the design of materials to sustain many cycles in pursuit of low cost and profitable devices for water treatments. In this regard, a chitosan reinforced with poly-ε-caprolactone thermoplastic composite was prepared and characterized by scanning electron microscopy; Fourier transforms infrared spectroscopy, X-ray diffraction analysis, mechanical properties, as well as erosion and swelling assays. The isotherm and kinetic data were fitted with Freundlich and pseudo-second-order models, respectively. The adsorption equilibrium capacities at pH 6 of Zn(II), Cu(II), Fe(II), and Al(III) were 165.59 ± 3.41 mg/g, 3.91 ± 0.02 mg/g, 10.72 ± 0.11 mg/g, and 1.99 ± 0.22 mg/g, respectively. The adsorbent material lost approximately 6% of the initial mass in the adsorption-desorption processes.

Response Surface Methodology for the Optimization of Zn-Contaminated Soil Remediation by Soil Washing with Water-Soluble Chitosan

Soil washing is an important method for the remediation of contaminated soil. This research presents the optimization of soil washing conditions in the remediation of Zn-contaminated soils with water-soluble chitosan (WSCS). Response surface methodology (RSM) was used to optimized the washing conditions after single factor experiments. The central composite design (CCD) with three factors and five levels was applied to the optimization of the removal efficiency of Zn from soils, and WSCS concentration, pH value, and washing time were evaluated variables in the washing process. Results indicated that the pH value (p < 0.0001) was the most significant factor which mainly affected the distribution and content of metal species in aqueous solution, ion exchange and adsorption/desorption behavior of metals, solubility of chelating agent, as well as readsorption of metal complexes. The optimal conditions for the Zn removal from soils were WSCS concentration of 1.5%, pH of 3.3, and washing time of 72 min. The removal efficiency could reach 65.4% under the optimized conditions, which was close to the predicted value of 68.3% by the response surface method. Therefore, it could be found that the response surface methodology was an effective method to determine the optimal conditions for the removal of metals from contaminated soils by soil washing.

Eco-friendly adsorbents based on abietic acid, boswellic acid, and chitosan/magnetite for removing waste oil from the surface of the water

Petroleum oil leakage and industrial oily waste on the water surface are sustainable pollutions. The removal process by eco-friendly adsorbents is a critical challenge. It also requires sustainable treatment. The natural hydrophobic material such as abietic acid, boswellic acid, and chitosan was added to magnetite nanoparticles with different concentrations of 10, 15, and 20% on its surface. The magnetite acquires partially hydrophobic properties. The prepared natural adsorbents were analyzed by employing wide-angle X-ray diffraction (WAXD), vibrating sample magnetometer (VSM), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), particle size and zeta potential, and contact angle measurements. Chitosan adsorbs at the outer surface of magnetite nanoparticles while boswellic and abietic absorb in bulk. All prepared adsorbents are effective in adsorbing waste oil from the water surface. The contact angle of MB20 (magnetite/20 percent boswellic) is greater than that of MA20 and MC20 (magnetite/20% abietic or chitosan, respectively), indicating that it has more hydrophobic characteristics. The oil removal efficiency and adsorption capacity of MB20 are the highest values 57.6%, and 24 g/g, respectively. All eco-friendly adsorbents are nontoxic with low-cost production and are used many times.

Recent advances in starch-based magnetic adsorbents for the removal of contaminants from wastewater: A review

Considerable concern exists regarding water contamination by various pollutants, such as conventional pollutants (e.g., heavy metals and organics) and emerging micropollutants (e.g., consumer care products and interfering endocrine-related compounds). Currently, academics are continuously exploring sustainability-related materials and technologies to remove contaminants from wastewater. Magnetic starch-based adsorbents (MSAs) can combine the advantages of starch and magnetic nanoparticles, which exhibit unique critical features such as availability, cost-effectiveness, size, shape, crystallinity, magnetic properties, stability, adsorption properties, and excellent surface properties. However, limited reviews on MSAs' preparations, characterizations, applications, and adsorption mechanisms could be available nowadays. Hence, this review not only focuses on their activation and preparation methods, including physical (e.g., mechanical activation treatment, microwave radiation treatment, sonication, and extrusion), chemical (e.g., grafting, cross-linking, oxidation and esterification), and enzymatic modifications to enhance their adsorption properties, but also offers an all-round state-of-the-art analysis of the full range of its characterization methods, the adsorption of various contaminants, and the underlying adsorption mechanisms. Eventually, this review focuses on the recycling and reclamation performance and highlights the main gaps in the areas where further studies are warranted. We hope that this review will spark an interdisciplinary discussion and bring about a revolution in the applications of MSAs.

Enhanced Cr(VI) stabilization in soil by chitosan/bentonite composites

In this study, chitosan/bentonite composites (CSBT) was synthesized and applied to the immobilization of chromium in the soil. The influence of passivating agents on various forms of chromium was investigated by batch experiment. The results showed that CSBT could reduce the content of exchangeable form and oxidizable form, while increase the content of residual form of chromium. The addition of 0.2 g·kg^-1 CSBT had the best effect, with the concentration of exchangeable, reducible and oxidizable form decreased by 46.74%, 8.15%, and 14.46%, respectively. During the experiment time, the passivation effect increased rapidly within 14 days, and the content of residual form in the total Cr increased from 0.76% to 14.23%, the equilibrium was reached at the 28th day and was basically maintained in the subsequent period. CSBT had little impact on soil pH, and soil pH maintained constant during the experiment period. The amino, carboxyl and hydroxyl groups of CSBT promoted the conversion of available chromium to residual state in soil, and reduced the bioavailability of chromium in soil.

Cellulose nanofibers/PVA blend polymeric beads containing in-situ prepared magnetic nanorods as dye pollutants adsorbents

Magnetic beads were developed from polyvinyl alcohol and different amounts of cellulose nanofibers (CNF) by in-situ preparation of iron oxide nanoparticles in an alkaline aqueous medium at room temperature. The CNF were isolated from wheat straw, whereas the magnetic nanoparticles (MNPs) precursors were simple iron salts. The complete characterization of all the obtained materials was conducted, and among some other outstanding results it showed that all the components were strongly interacting via hydrogen bonding, while the nano-rods and husks like MNPs were effectively acting as crosslinking dots. All the prepared materials had good magnetic responses, and they were able to remove not only cationic, but also anionic dye pollutants from aqueous model solutions.

NiII NPs entrapped within a matrix of l-glutamic acid cross-linked chitosan supported on magnetic carboxylic acid-functionalized multi-walled carbon nanotube: a new and efficient multi-task catalytic system for the green one-pot synthesis of diverse heterocyclic frameworks

In the present study, a new l-glutamic acid cross-linked chitosan supported on magnetic carboxylic acid-functionalized multi-walled carbon nanotube (Fe₃O₄/f-MWCNT-CS-Glu) nanocomposite was prepared through a convenient one-pot multi-component sequential strategy. Then, nickel^II nanoparticles (Ni^II NPs) were entrapped within a matrix of the mentioned nanocomposite. Afterward, the structure of the as-prepared Fe₃O₄/f-MWCNT-CS-Glu/Ni^II nanosystem was elucidated by various techniques, including FT-IR, PXRD, SEM, TEM, SEM-based EDX and elemental mapping, ICP-OES, TGA/DTA, and VSM. In the next part of this research, the catalytic applications of the mentioned nickel^II-containing magnetic nanocomposite were assessed upon green one-pot synthesis of diverse heterocyclic frameworks, including bis-coumarins (3a–n), 2-aryl(or heteroaryl)-2,3-dihydroquinazolin-4(1H)-ones (5a–r), 9-aryl-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-diones (7a–n), and 2-amino-4-aryl-7,7-dimethyl-5-oxo-5,6,7,8-tetrahydro-4H-chromene-3-carbonitriles (9a–n). The good-to-excellent yields of the desired products, satisfactory reaction rates, use of water solvent or solvent-free reaction medium, acceptable turnover numbers (TONs) and turnover frequencies (TOFs), along with comfortable recoverability and satisfying reusability of the as-prepared nanocatalyst for at least eight successive runs, and also easy work-up and purification procedures are some of the advantages of the current synthetic protocols.

In this research work, an Fe₃O₄/f-MWCNT-CS-Glu/Ni^II hybrid nanocomposite was synthesized, characterized, and used as a new and efficient multi-task catalytic system for the green one-pot synthesis of diverse heterocyclic frameworks.

Discussions on the Properties of Emulsion Prepared by Using an Amphoteric Chitosan as an Emulsifier

A typical emulsion contains oil and water phases, and these two phases can be combined by an emulsifier with both lipophilic and hydrophilic groups to form a mixture. If the component of water is more than oil, the mixture is termed as o/w emulsion. The water is called the continuous phase and the oil is called the dispersed phase. Oppositely, if the component of oil is more than water, the mixture is termed as w/o emulsion. The oil is called the continuous phase and the water is called the dispersed phase. Chitosan, which is biocompatible and non-toxic, was modified as an amphoteric emulsifier to replace sodium acrylates copolymer in the preparation of emulsions. Both sodium acrylates copolymer and the modified chitosan were used as emulsifiers, respectively, and the properties of moisturizing, transmittance, the number of bacteria, and emulsion stability were measured. The experimental results showed that the amount of amphoteric chitosan is less than that of sodium acrylate copolymer by 20% under a similar degree of emulsification. The measurement of spatial moisture showed the difference in equilibrium humidity was in the range of 2.05 to 2.20 gH2O/kg dry air, indicating that the moisture retention of the modified chitosan is better. In addition, the calculation of bacterial growth confirmed that the number of bacteria in the amphoteric chitosan emulsion and the sodium acrylate copolymer emulsion were 80 and 560, respectively. The emulsion stability was tested by the separation of oil and water phases in the diluted emulsion and by centrifugal accelerated sedimentation. The results showed that, for both emulsifiers, no separation of the oil and water phases occurred within one hour, and the stability of the modified chitosan emulsion was better. Therefore, the modified chitosan successfully substitutes sodium acrylates copolymer as an emulsifier in the preparation of emulsion.

Cutting-Edge Progress in Stimuli-Responsive Bioadhesives: From Synthesis to Clinical Applications

With the advent of “intelligent” materials, the design of smart bioadhesives responding to chemical, physical, or biological stimuli has been widely developed in biomedical applications to minimize the risk of wounds reopening, chronic pain, and inflammation. Intelligent bioadhesives are free-flowing liquid solutions passing through a phase shift in the physiological environment due to stimuli such as light, temperature, pH, and electric field. They possess great merits, such as ease to access and the ability to sustained release as well as the spatial transfer of a biomolecule with reduced side effects. Tissue engineering, wound healing, drug delivery, regenerative biomedicine, cancer therapy, and other fields have benefited from smart bioadhesives. Recently, many disciplinary attempts have been performed to promote the functionality of smart bioadhesives and discover innovative compositions. However, according to our knowledge, the development of multifunctional bioadhesives for various biomedical applications has not been adequately explored. This review aims to summarize the most recent cutting-edge strategies (years 2015–2021) developed for stimuli-sensitive bioadhesives responding to external stimuli. We first focus on five primary categories of stimuli-responsive bioadhesive systems (pH, thermal, light, electric field, and biomolecules), their properties, and limitations. Following the introduction of principal criteria for smart bioadhesives, their performances are discussed, and certain smart polymeric materials employed in their creation in 2015 are studied. Finally, advantages, disadvantages, and future directions regarding smart bioadhesives for biomedical applications are surveyed.

Effects of carboxymethyl chitosan adsorption on bioactive components of Antarctic krill oil

High acid value (AV) and fluorine content of Antarctic krill oil (AKO) extracted from frozen krill by ethanol limit its product development. In this study, a method was proposed to reduce the AV and fluorine content of AKO by carboxymethyl chitosan (CMCS) adsorption. The optimal adsorption condition was 12.5% (w/v) of CMCS at 30℃ for 15 min. At this condition, AV and fluorine content decreased by 78.0% and 61.4%, respectively. It is interesting that CMCS adsorption showed specificity to particular substances. Although free fatty acids content showed a significant reduction, free EPA and DHA, phospholipid and astaxanthin remained almost constant. Moreover, CMCS adsorption showed no influence on neuroprotective activity of AKO against H₂O₂-induced neuro-damage of PC12 cells. The reclaimed CMCS showed an undiminished antimicrobial activity against both Gram-positive and Gram-negative bacteria. The CMCS adsorption shows a potential development for refining AKO and other oils in food industry.

Chitosan as a Tool for Sustainable Development: A Mini Review

New developments require innovative ecofriendly materials defined by their biocompatibility, biodegradability, and versatility. For that reason, the scientific society is focused on biopolymers such as chitosan, which is the second most abundant in the world after cellulose. These new materials should show good properties in terms of sustainability, circularity, and energy consumption during industrial applications. The idea is to replace traditional raw materials with new ecofriendly materials which contribute to keeping a high production rate but also reducing its environmental impact and the costs. The chitosan shows interesting and unique properties, thus it can be used for different purposes which contributes to the design and development of sustainable novel materials. This helps in promoting sustainability through the use of chitosan and diverse materials based on it. For example, it is a good sustainable alternative for food packaging or it can be used for sustainable agriculture. The chitosan can also reduce the pollution of other industrial processes such as paper production. This mini review collects some of the most important advances for the sustainable use of chitosan for promoting circular economy. Hence, the present review focuses on different aspects of chitosan from its synthesis to multiple applications.

Sustainable production of curable maltodextrin-based electrospun microfibers

Maltodextrins are inexpensive, water-soluble starch hydrolysis products composed of high molecular weight polysaccharide molecules. This feature allows their water solutions to be processed by electrospinning to produce bio-based microfibrous mats. Also, the presence of hydroxyl functions along the maltodextrin's backbone enables cross-linking reactions to be performed, necessary to overcome the intrinsic solubility of the starting material, by exploiting suitable functional molecules. In this work, the electrospinning process to obtain fibre deposition from water solutions of five different commercial maltodextrins was firstly optimized. Well-defined fibres with diameters ranging between 1.1 μm and 1.5 μm were successfully obtained using water as the unique solvent. Subsequently, the same maltodextrin-containing water solutions with citric acid added were then processed again. The presence of citric acid did not hinder the spinnability of the studied systems, while the possibility to achieve a one-step thermal curing of the obtained fibres was proved via solubility tests, TGA, and FTIR-ATR analyses. Eventually, bio-based cross-linked mats with fibre diameters ranging from 0.7 μm to 1.4 μm were obtained from the electrospinning of commercial maltodextrins and citric acid, employing water as the unique solvent and environmentally friendly curing processes. This approach enables the reported mats to be further studied for environmental, pharmaceutical, and medical applications.

This paper reports a sustainable approach to obtain thermally curable bio-based microfibrous mats from the electrospinning of water solutions containing commercial maltodextrins and citric acid.

Advances in biopolymer composites and biomaterials for the removal of emerging contaminants

Domestic, agriculture, and industrial activities contaminate the waterbodies by releasing toxic substances and pathogens. Removal of pollutants from wastewater is critical to ensuring the quality of accessible water resources. Several wastewater treatments are often used. Researchers are increasingly focusing on adsorption, ion exchange, electrostatic interactions, biodegradation, flocculation, and membrane filtration for the efficient reduction of pollutants. Biopolymers are a combination of two or more products produced by the living organisms used to give the desired finished product with a unique attribute. Biomaterials are also similar to traditional polymers by having higher flexibility, biodegradability, low toxicity, and nontoxic secondary byproducts producing ability. Grafting, functionalization, and crosslinking will be used to enhance the characteristics of biopolymers. The present chapter will illustrate some of the important biopolymers and its compos that will impact wastewater treatment in the future. Most commonly used biopolymers including chitosan (CS), activated carbon (AC), carbon-nanotubes (CNTs), and graphene oxide (GO) are discussed. Finally, the opportunities and difficulties for applying adsorbents to water pollution treatment are discussed.

Remediation of zinc-contaminated soils by using the two-step washing with citric acid and water-soluble chitosan

Remediation of heavy metal contaminated soil with appropriate washing agents is crucial to the decline in the harmfulness of contaminated soil by heavy metals to the environment and human health. In this study, citric acid (CA) and water-soluble chitosan (WSCS) as natural and degradable washing agents were used to remove Zn in the soil by two-step washing method. Results indicated that the two-step washing with CA and WSCS were found to be suitable for the removal of Zn from the contaminated soils, which significantly decreased the total concentration of Zn in the soil. After the remediation process with two-step soil washing, the contents of Zn in different chemical species decreased, especially for the carbonate-bound fraction. Therefore, the two-step soil washing with CA and WSCS was advisable for the remediation of Zn-contaminated soils. The washing mechanism could include the acid dissolution, ion exchange and complexation reaction between zinc ions and functional groups such as hydroxyl, carboxyl, amine and amide groups. This study provided the theoretical support for the exploitation and application of suitable washing agents used for the remediation of contaminated soils by heavy metals.

Chitosan-based nanocomposite films incorporated with NiO nanoparticles: Physicochemical, photocatalytic and antimicrobial properties

The aim of this research was to fabricate active nanocomposite films by incorporation of nickel oxide nanoparticles (NiONPs) (3, 6 and 9% w/w) into the chitosan-based films. The NiONPs were synthesized by solution combustion method and the films were prepared by solvent casting method. The formation of new interactions and increasing of films' crystallinity were confirmed by FT-IR and XRD analyses. Uniform dispersion of NiONPs at lower concentrations and their aggregation at level of 9% was confirmed by FE-SEM observations. Water barrier properties, tensile strength, thermal properties and surface hydrophobicity of films enhanced by addition of 6% NiONPs. Photocatalytic activity of nanocomposites was confirmed by absorption of 72% of methyl orange during 270 min under UV irradiation. The nanocomposite films exhibited good antibacterial activity against gram-positive (S. aureus) and gram-negative (S. typhimurium) bacteria. Therefore, the chitosan-NiONPs nanocomposite films could be used for active food packaging applications and photodecolorization purposes.

Preparation and Characterization of Chitosan/Bentonite Composites for Cr (VI) Removal from Aqueous Solutions

Chitosan/bentonite composites (CSBT) prepared by physical gelation were tested for the adsorption of Cr (VI) from aqueous solutions in this work. The composites were prepared at a mass ratio from 2 : 1 to 1 : 2, and a composite of 1 : 1 was found to be most suitable for efficient Cr (VI) removal. The influencing parameters, including temperature, adsorbent dose, and pH, were statistically optimized using response surface methodology (RSM) for the removal of Cr (VI). The pH was found to be the limiting factor during the adsorption process, and under the optimal conditions, namely, adsorbent dose of 400 mg/L, $\text{pH}=3$ , and temperature of 298 K, 87.61% Cr (VI) would be removed expectantly. The mechanism of Cr (VI) removal by CSBT was discussed, and the protonation of amino groups on chitosan followed by the combination of -NH3+ and anionic hexavalent chromium was the primary driving force. In addition, the removal of Cr (VI) onto CSBT was monolayer adsorption with a maximum adsorption capacity of 133.85 mg/g by the Langmuir isotherm. CSBT follows a pseudosecond-order kinetic model, and within 1.5 h, adsorption was observed to reach equilibrium. The calculated thermodynamic functions clarified that the adsorption process was exothermic and spontaneous below 312.60 K. CSBT could be regenerated after desorption by 0.5 mol/L NaOH solutions and exhibited superior reusability after six cycles. This study demonstrated composites of chitosan/bentonite as eco-friendly bioadsorbents for the removal of Cr (VI) from aqueous environments.

A comprehensive survey upon diverse and prolific applications of chitosan-based catalytic systems in one-pot multi-component synthesis of heterocyclic rings

Heterocyclic compounds are among the most prestigious and valuable chemical molecules with diverse and magnificent applications in various sciences. Due to the remarkable and numerous properties of the heterocyclic frameworks, the development of efficient and convenient synthetic methods for the preparation of such outstanding compounds is of great importance. Undoubtedly, catalysis has a conspicuous role in modern chemical synthesis and green chemistry. Therefore, when designing a chemical reaction, choosing and or preparing powerful and environmentally benign simple catalysts or complicated catalytic systems for an acceleration of the chemical reaction is a pivotal part of work for synthetic chemists. Chitosan, as a biocompatible and biodegradable pseudo-natural polysaccharide is one of the excellent choices for the preparation of suitable catalytic systems due to its unique properties. In this review paper, every effort has been made to cover all research articles in the field of one-pot synthesis of heterocyclic frameworks in the presence of chitosan-based catalytic systems, which were published roughly by the first quarter of 2020. It is hoped that this review paper can be a little help to synthetic scientists, methodologists, and catalyst designers, both on the laboratory and industrial scales.

Preparation and Characterization of High-Efficiency Magnetic Heavy Metal Capture Flocculants

In this study, a high-efficiency magnetic heavy metal flocculant MF@AA was prepared based on carboxymethyl chitosan and magnetic Fe3O4. It was characterized by SEM, FTIR, XPS, XRD and VSM, and the Cu(II) removal rate was used as the evaluation basis for the preparation process. The effects of AMPS content, total monomer concentration, photoinitiator concentration and reaction time on the performance of MF@AA flocculation to remove Cu(II) were studied. The characterization results show that MF@AA has been successfully prepared and exhibits good magnetic induction characteristics. The synthesis results show that under the conditions of 10% AMPS content, 35% total monomer concentration, 0.04% photoinitiator concentration, and 1.5 h reaction time, the best yield of MF@AA is 77.69%. The best removal rate is 87.65%. In addition, the response surface optimization of the synthesis process of MF@AA was performed. The optimal synthesis ratio was finally determined as iron content 6.5%, CMFS: 29.5%, AM: 53.9%, AMPS: 10.1%. High-efficiency magnetic heavy metal flocculant MF@AA shows excellent flocculation performance in removing Cu(II). This research provides guidance and ideas for the development of efficient and low-cost flocculation technology to remove Cu(II) in wastewater.

Characterization of Different Salt Forms of Chitooligosaccharides and Their Effects on Nitric Oxide Secretion by Macrophages

In this paper, chitooligosaccharides in different salt forms, such as chitooligosaccharide lactate, citrate, adipate, etc., were prepared by the microwave method. They were characterized by SEM, FTIR, NMR, etc., and the nitric oxide (NO) expression was determined in RAW 264.7 cells. The results showed that pure chitooligosaccharide was an irregular spherical shape with rough surface, and its different salt type products are amorphous solid with different honeycomb sizes. In addition to the characteristic absorption peaks of chitooligosaccharides, in FTIR, the characteristic absorption of carboxyl group, methylene group, and aromatic group in corresponding acid appeared. The characteristic absorption peaks of carbon in carboxyl group, hydrogen and carbon in methyl, methylene group, and aromatic group in corresponding acid also appeared in NMR. Therefore, the sugar ring structure and linking mode of chitooligosaccharides did not change after salt formation of chitooligosaccharides. Different salt chitooligosaccharides are completely different in promoting NO secretion by macrophages, and pure chitooligosaccharides are the best.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.