Mixed micellization study of ibuprofen (sodium salt) and cationic surfactant (conventional as well as gemini)

A Study of the Micellar Formation of N-Alkyl Betaine Ethyl Ester Chlorides Based on the Physicochemical Properties of Their Aqueous Solutions

In this study, a series of four surface-active compounds-N-alkyl betaine ethyl ester chlorides, CnBetC2Cl-were synthesized and characterized in aqueous solutions. As with other alkyl betaines, these amphiphiles can be practically used, for example, as co-surfactants and/or solubility enhancers acting according to hydrotropic or micellar mechanisms, depending on the alkyl chain length in the amine. We focused on the representatives of the medium alkyl chain length (C6-C12) to find the dependence between the alkyl chain length in N-alkyl betaine ethyl ester chlorides and the surface, volumetric, acoustic, and viscometric properties of their solutions. Ethyl esters, the derivatives of amino acids, were chosen to increase functionality and take advantage of possible hydrolysis in solutions at higher pH, which is also a key parameter in biodegradability. The micellization parameters were calculated based on the physicochemical characteristics. We focused our interest on the ester with a dodecyl substituent since we can compare and discuss its properties with some other C12 representatives that are available in literature. Surprisingly, its micellization characteristic is almost temperature-independent in the investigated temperature range, t = (15-45) °C. Particularly interesting are the results of dynamic light scattering (DLS), which show that the changes in physicochemical parameters of the C12 homolog around the CMC are caused by the two types of micelles of different sizes present in solutions.

Aggregation phenomena and physico-chemical properties of tetradecyltrimethylammonium bromide and protein (bovine serum albumin) mixture: Influence of electrolytes and temperature

It is important for biological, pharmaceutical, and cosmetic industries to understand how proteins and surfactants interact. Herein, the interaction of bovine serum albumin (BSA) with tetradecyltrimethylammonium bromide (TTAB) in different inorganic salts (KCl, K2SO4, K3PO4.H2O) has been explored through the conductivity measurement method at different temperatures (300.55 to 325.55 K) with a specific salt concentration and at a fixed temperature (310.55 K) using different salts concentrations. The extent of micelle ionization (α) and different thermodynamic parameters associated with BSA and TTAB mixtures in salt solutions were calculated. Evaluation of the magnitudes of ∆Hm0 and ∆Sm0 showed that the association was exothermic and primarily an enthalpy-operated process in all cases at lower contents of BSA, but the system became endothermic, and entropy driven in the presence of K3PO4.H2O at a relatively higher concentration of BSA. The enthalpy-entropy compensation variables were determined, which explained the types and nature of interactions between TTAB and BSA in salt media. Molecular docking analysis revealed that the main stabilizing factors in the BSA-TTAB complex are electrostatic and hydrophobic interactions. These findings aligned with the significant results obtained from the conductometry method regarding the nature and characteristics of binding forces observed between BSA and TTAB.

Physico-chemical properties of the association of cetyltrimethylammonium bromide and bovine serum albumin mixture in aqueous-organic mixed solvents

Herein, we have investigated the association behavior of bovine serum albumin (BSA) and cetyltrimethylammonium bromide (CTAB) using the conductivity method in H₂O and H₂O + organic mixed solvents at different temperatures. The association phenomenon was detected from the deviation of the conductivity changes with enhancing the surfactant concentration and changes of numerous physico-chemical properties, such as CMC, α, β and thermodynamic variables (∆G⁰_m, ∆H⁰_m and ∆S⁰_m). The values of CMC for the CTAB + BSA system in 10 % (v/v) solvents follow the trend: CMC_water < CMC_water+DMSO < CMC_water+AN < CMC_water+DX < CMC_water+DMF. The interaction of BSA with CTAB is notably influenced due to a change of temperature and extent of hydration of BSA and surfactant. The obtained values of -∆G⁰_m manifest that the association of BSA and CTAB mixture is a spontaneous process, while the values of -∆G⁰_m in presence of 10 % (v/v) aq. organic solvents come out in the given sequence: -∆G_m^o (H₂O + DMSO) > ∆G_m^o (H₂O + DMF) > -∆G_m^o (H₂O + DX) > -∆G_m^o (H₂O + AN). The H-bonding, ion-dipole, along with the hydrophobic interactions, are believed to be the binding interactions between BSA and CTAB in the study media.

Influence of twin-headed gemini micellar system on the study of methionine amino acid with ninhydrin in buffer solution

The influence of double-headed gemini was examined in the present study by studying the amino acid methionine mixed with ninhydrin in CH₃COOH-CH₃COONa buffer solvent. The absorbance was monitored at fixed time intervals with UV-vis spectroscopy. An impact typical of surfactants was observed on the ninhydrin-methionine reaction and explained by a pseudo-phase model of micelles. The effect of different temperatures (343 to 363 K) was also determined. Based on data showing the impact of temperature on k_ψ , several relevant thermodynamic quantities, ΔH ^#, ΔS ^#, and E _a, were calculated using linear least-squares regression. In addition, the influence of the other reaction ingredients on the reaction, that is, pH and the concentration of ninhydrin and methionine, was studied. The CMC (critical micelle concentration) of pure geminis and the surfactant system with methionine and ninhydrin was evaluated at two temperatures, i.e. at 303 K and 353 K by conductivity measurements. The CMC values of pure gemini surfactants evaluated in the existing case at 303 K are concordant with the results stated before. Moreover, other parameters, including rates and binding constants, were calculated.

Synergistic Interaction and Binding Efficiency of Tetracaine Hydrochloride (Anesthetic Drug) with Anionic Surfactants in the Presence of NaCl Solution Using Surface Tension and UV–Visible Spectroscopic Methods

Surfactants are ubiquitous materials that are used in diverse formulations of various products. For instance, they improve the formulation of gel by improving its wetting and rheological properties. Here, we describe the effects of anionic surfactants on an anesthetic drug, tetracaine hydrochloride (TCH), in NaCl solution with tensiometry and UV–visible techniques. Various micellar, interfacial, and thermodynamic parameters were estimated. The outputs were examined by using different theoretical models to attain a profound knowledge of drug–surfactant mixtures. The presence of attractive interactions among drug and surfactant monomers (synergism) in mixed micelle was inferred. However, it was found that sodium dodecyl sulfate (SDS) showed greater interactions with the drug in comparison to sodium lauryl sarcosine (SLS). The binding of the drug with surfactants was monitored with a spectroscopic technique (UV–visible spectra). The results of this study could help optimize the compositions of these mixed aggregates and find the synergism between monomers of different used amphiphiles.

Interaction of TX-100 and Antidepressant Imipramine Hydrochloride Drug Mixture: Surface Tension, 1H NMR, and FT-IR Investigation

Interfacial interaction amongst the antidepressant drug-imipramine hydrochloride (IMP) and pharmaceutical excipient (triton X-100 (TX-100-nonionic surfactant)) mixed system of five various ratios in dissimilar media (H₂O/50 mmol·kg⁻¹ NaCl/250 mmol·kg⁻¹ urea) was investigated through the surface tension method. In addition, in the aqueous solution, the ¹H-NMR, as well as FT-IR studies of the studied pure and mixed system were also explored and deliberated thoroughly. In NaCl media, properties of pure/mixed interfacial surfaces enhanced as compared with the aqueous system, and consequently the synergism/attractive interaction among constituents (IMP and TX-100) grew, whereas in urea (U) media a reverse effect was detected. Surface excess concentration (Γ_max), composition of surfactant at mixed monolayer (X1σ), activity coefficient (f₁^σ (TX-100) and f₂^σ (IMP)), etc. were determined and discussed thoroughly. At mixed interfacial surfaces interaction, parameter (β^σ) reveals the attractive/synergism among the components. The Gibbs energy of adsorption (ΔGadso) value attained was negative throughout all employed media viewing the spontaneity of the adsorption process. The ¹H NMR spectroscopy was also employed to examine the molecular interaction of IMP and TX-100 in an aqueous system. FT-IR method as well illustrated the interaction amongst the component. The findings of the current study proposed that TX-100 surfactant could act as an efficient drug delivery vehicle for an antidepressant drug. Gels can be used as drug dosage forms due to recent improvements in the design of surfactant systems. Release mechanism of drugs from surfactant/polymer gels is dependent upon the microstructures of the gels and the state of the drugs within the system.

Effects of various media on micellization, adsorption and thermodynamic behaviour of imipramine hydrochloride and antimicrobial surfactant mixtures

The effect of various media (aqueous, NaCl, urea (U) and thiourea (TU)) on the micellization and adsorption activity of varied mixtures of imipramine hydrochloride (IMP) and benzethonium chloride (BZCl) is investigated via tensiometry. In an aqueous medium, the interactions between IMP and BZCl are also evaluated using UV-visible and FTIR spectroscopy. The interaction between components increases with increased mole fraction (α 1) of BZCl in the mixed system (IMP + BZCl). Different parameters, such as micellar and the mixed monolayer component composition, the interaction parameters of the solution and the interface, the activity coefficients of the components in solution and at the interface, and thermodynamic parameters, are computed using different proposed theoretical models (i.e. Clint, Motomura, Rubingh and Rosen). The cmc values obtained for the pure components and mixtures (IMP + BZCl) of all the compositions are found to be less in NaCl than in the aqueous solution while found more in the presence of U or TU. TU is more effective in increasing the cmc of the pure and mixed systems than U. The Gibbs free energy ( Δ G mic ∘ ) values of the studied pure and mixed systems are negative, showing the spontaneous nature of the reaction.

Investigation of Solution Behavior of Antidepressant Imipramine Hydrochloride Drug and Non-Ionic Surfactant Mixture: Experimental and Theoretical Study

In this paper, the interaction of imipramine hydrochloride (IMP, antidepressant drug) and a non-ionic surfactant Triton X-100 (TX-100) mixture in five different ratios through the tensiometric method in different solvents (aqueous/0.050 mol·kg⁻¹ aqueous NaCl/0.250 mol·kg⁻¹ aqueous urea (U)) were examined thoroughly at a temperature of 298 K. UV–Visible studies in an aqueous system of IMP + TX-100 mixtures were also investigated and discussed in detail. The pure (IMP and TX-100) along with the mixtures’ critical micelle concentration (cmc) were assessed by a tensiometric technique. The obtained deviation of the mixtures’ cmc values from their ideal values revealed the nonideal behavior of IMP + TX-100 mixtures amongst IMP and TX-100. Compared to aqueous systems, in the presence of aqueous NaCl, several changes in micelles/mixed micelles occurred, and hence a synergism/attractive interaction amongst components was found increased while in the existence of U, the synergism/attractive interaction between them decreased. The evaluated interaction parameter (β^Rb) value of mixed micelles showed the attractive or synergism between the IMP and TX-100. Various evaluated thermodynamic parameters in an aqueous system showed that the mixed micellization of the IMP + TX-100 mixture was an entropically spontaneous phenomenon, although the existence of salt in all studied systems can somewhat increase the spontaneity of the micellization process and in the aqueous U system, the spontaneity of the micellization process decreased. In an aqueous system, the interaction between IMP and TX-100 was also confirmed by UV–Visible study.

Mixed Micellization and Spectroscopic Studies of Anti-Allergic Drug and Non-Ionic Surfactant in the Presence of Ionic Liquid

In drug delivery, surfactants are used to reduce side effects and to increase drug efficiency. The present work aimed to study the interaction of diphenhydramine hydrochloride (anti-allergic drug) with TX–45 (non-ionic surfactant) in the absence and presence of ionic liquid (1-hexyl-3-methylimidazolium chloride). The physicochemical parameters were estimated by the surface tension measurement. Various theoretical models (Clint, Rubingh, Motomura, and Maeda) were applied to determine the attractive behavior between drug and surfactant mixtures at the surface and in bulk. The drug and surfactant mixtures exhibit synergistic behavior in the absence and presence of ionic liquid. Several energetic parameters were also estimated with the assistance of regular solution approximation and pseudo phase separation model that indicate micelle formation and adsorption of surfactant at the surface is thermodynamically advantageous. The morphology of pure and mixture of amphiphiles has been estimated by the Tanford and Israelachvili theories. UV-visible spectroscopy was used to quantify the attractive behavior of the drug with surfactant with the help of a binding constant (K).

Aggregation behavior and thermodynamic properties of the mixture of sodium carboxymethyl cellulose and cetyltrimethylammonium bromide in numerous temperatures and mixed solvents

Interaction of sodium carboxymethylcellulose (SCMC) with cetyltrimethylammonium bromide (CTAB; cationic in nature) in H2O and additives (alcohols and diols) media has been investigated using conductivity technique. The micellar parameters such as critical micelle concentration (cmc), fraction of counter ion binding (β), thermodynamic parameters, transfer properties, and enthalpy-entropy compensation parameters of CTAB + SCMC mixture have been assessed in water and aq. alcohols/diols media. One cmc value was achieved for CTAB + SCMC mixtures in the entire circumstances and the attendance of SCMC disfavors the CTAB micellization. The cmc values were obtained to be greater in alcohols and diols media compared to H2O medium. The cmc values also exhibit a dependency on the solvent composition and temperature variation. In all the cases, the ΔG 0 m values were achieved to be negative which signifying the spontaneous formation of micelles while the extent of spontaneity is decreased in alcohols and diols media. Both the ΔH 0 m and ΔS 0 m reveal that hydrophobic, ion-dipole as well as electrostatic interactions are the proposed binding forces between CTAB and SCMC. The compensation parameters (ΔH 0* m and T c ) are in decent agreement with the biological fluid.

Interaction of Diphenhydramine Hydrochloride with Cationic and Anionic Surfactants: Mixed Micellization and Binding Studies

The focus of the present work is to evaluate the interactions of an anti-allergic drug (diphenhydramine hydrochloride, DPH) with anionic (sodium dodecyl sulfate, SDS) and cationic (cetylpyridinium chloride, CPC) surfactants in the aqueous medium. The mixed micellization behavior and surface properties of drug-surfactant mixtures have been examined by surface tension measurements. Various theoretical approaches were applied to explore the synergistic or non-ideal behavior of the current mixed systems. Furthermore, the binding studies of drug with surfactants have been elaborated by UV–visible spectroscopy. Benesi–Hildebrand (B-H) theory was used to compute stoichiometric ratio, binding constant, and free energy change for the drug-surfactant mixtures. The outputs are deliberated taking into consideration the use of surfactants as capable drug delivery agents for DPH and hence advance bioavailability.