Chemical messengers: mediated oxidations with the enzyme laccase

Laccase-Carrying Polylactic Acid Electrospun Fibers, Advantages and Limitations in Bio-Oxidation of Amines and Alcohols

Laccases are oxidative enzymes that could be good candidates for the functionalization of biopolymers with several applications as biosensors for the determination of bioactive amine and alcohols, for bioremediation of industrial wastewater, and for greener catalysts in oxidation reactions in organic synthesis, especially used for non-phenolic compounds in combination with redox mediators in the so-called Laccase Mediator System (LMS). In this work, we describe the immobilization of Laccase from Trametes versicolor (LTv) in poly-L-lactic acid (PLLA) nanofibers and its application in LMS oxidation reactions. The PLLA-LTv catalysts were successfully produced by electrospinning of a water-in-oil emulsion with an optimized method. Different enzyme loadings (1.6, 3.2, and 5.1% ^w/_w) were explored, and the obtained mats were thoroughly characterized. The actual amount of the enzyme in the fibers and the eventual enzyme leaching in different solvents were evaluated. Finally, the PLLA-LTv mats were successfully applied as such in the oxidation reaction of catechol, and in the LMS method with TEMPO as mediator in the oxidation of amines with the advantage of easier work-up procedures by the immobilized enzyme. However, the PLLA-LTv failed the oxidation of alcohols with respect to the free enzyme. A tentative explanation was provided.

An Organic Chemist's Guide to Mediated Laccase Oxidation

Laccases are oxidases that only require O₂ as a terminal oxidant. Thus, they provide an attractive green alternative to established alcohol oxidation protocols. However, laccases typically require catalytic amounts of mediator molecules to serve as electron shuttles between the enzyme and desired substrate. Consequently, laccase-mediator systems are defined by a multitude of parameters such as, e. g., the choice of laccase and mediator, the respective concentrations, pH, and the oxygen source. This complexity and a perceived lack of comparable data throughout literature represent an entry burden into this field. To provide a solid starting point, particularly for organic chemists, we herein provide a time-resolved, quantitative laccase and mediator screening based on the oxidation of anis alcohol as model reaction. We measured the redox potentials of mediators under the reaction conditions to relate them to their performance. Lastly, for particularly efficient laccase-mediator pairs, we screened important reaction parameters, resulting in an optimized setup for mediator-assisted laccase catalyzed oxidations.

Optimization of the Decolorization of the Reactive Black 5 by a Laccase-like Active Cell-Free Supernatant from Coriolopsis gallica

The textile industry generates huge volumes of colored wastewater that require multiple treatments to remove persistent toxic and carcinogenic dyes. Here we studied the decolorization of a recalcitrant azo dye, Reactive Black 5, using laccase-like active cell-free supernatant from Coriolopsis gallica. Decolorization was optimized in a 1 mL reaction mixture using the response surface methodology (RSM) to test the influence of five variables, i.e., laccase-like activity, dye concentration, redox mediator (HBT) concentration, pH, and temperature, on dye decolorization. Statistical tests were used to determine regression coefficients and the quality of the models used, as well as significant factors and/or factor interactions. Maximum decolorization was achieved at 120 min (82 ± 0.6%) with the optimized protocol, i.e., laccase-like activity at 0.5 U mL−1, dye at 25 mg L−1, HBT at 4.5 mM, pH at 4.2 and temperature at 55 °C. The model proved significant (ANOVA test with p < 0.001): coefficient of determination (R²) was 89.78%, adjusted coefficient of determination (R²A) was 87.85%, and root mean square error (RMSE) was 10.48%. The reaction conditions yielding maximum decolorization were tested in a larger volume of 500 mL reaction mixture. Under these conditions, the decolorization rate reached 77.6 ± 0.4%, which was in good agreement with the value found on the 1 mL scale. RB5 decolorization was further evaluated using the UV-visible spectra of the treated and untreated dyes.

Catalytic roles, immobilization and management of recalcitrant environmental pollutants by laccases: Significance in sustainable green chemistry

We are facing a high risk of exposure to emerging contaminants and increasing environmental pollution with the concomitant growth of industries. Persistence of these pollutants is a major concern to the ecosystem. Laccases, also known as "green catalysts" are multi-copper oxidases which offers an eco-friendly solution for the degradation of these hazardous pollutants to less or non-toxic compounds. Although various other biological methods exist for the treatment of pollutants, the fact that laccases catalyze the oxidation of broad range of substrates in the presence of molecular oxygen without any additional cofactor and releases water as the by-product makes them exceptional. They have a good possibility of utilization in various industries, especially for the purpose of bioremediation. Besides this, they have also been used in medical/health care, food industry, bio-bleaching, wine stabilization, organic synthesis and biosensors. This review covers the catalytic behaviour of laccases, their immobilization strategies, potential applications in bioremediation of recalcitrant environmental pollutants and their engineering. It provides a comprehensive summary of most factors to consider while working with laccases in an industrial setting. It compares the benefits and drawbacks of the current techniques. Immobilization and mediators, two of the most significant aspects in working with laccases, have been meticulously discussed.

Acceleration of oxidation promoted by laccase irradiation with red light

Irradiation with red light is able to improve yields and shorten the reaction time in enzymatic reactions.

Enzymatic bioconversion process of lignin: mechanisms, reactions and kinetics

Lignin is a wasted renewable source of biomass-derived value-added chemicals. However, due to its material resistance to degradation, it remains highly underutilized. In order to develop new, catalysed and more environment friendly reaction processes for lignin valorization, science has turned a selective concentrated attention to microbial enzymes. This present work looks at the enzymes involved with the main reference focus on the different elementary mechanisms of action/conversion rate kinetics. Pathways, like with laccases/peroxidases, employ radicals, which more readily result in polymerization than de-polymerization. The β-etherase system interaction of proteins targets β-O-4 ether covalent bond, which targets lower molecular weight product species. Enzymatic activity is influenced by a wide variety of different factors which need to be considered in order to obtain the best functionality and synthesis yields.

Laccase-Catalyzed 1,4-Dioxane-Mediated Synthesis of Belladine N-Oxides with Anti-Influenza A Virus Activity

Belladine N-oxides active against influenza A virus have been synthetized by a novel laccase-catalyzed 1,4-dioxane-mediated oxidation of aromatic and side-chain modified belladine derivatives. Electron paramagnetic resonance (EPR) analysis confirmed the role of 1,4-dioxane as a co-oxidant. The reaction was chemo-selective, showing a high functional-group compatibility. The novel belladine N-oxides were active against influenza A virus, involving the early stage of the virus replication life cycle.

Laccase-Enzyme Treated Flax Fibre for Use in Natural Fibre Epoxy Composites

Natural fibres have a high potential as reinforcement of polymer matrices, as they combine a high specific strength and modulus with sustainable production and reasonable prices. Modifying the fibre surface is a common method to increase the adhesion and thereby enhance the mechanical properties of composites. In this study, a novel sustainable surface treatment is presented: the fungal enzyme laccase was utilised with the aim of covalently binding the coupling agent dopamine to flax fibre surfaces. The goal is to improve the interfacial strength towards an epoxy matrix. SEM and AFM micrographs showed that the modification changes the surface morphology, indicating a deposition of dopamine on the surface. Fibre tensile tests, which were performed to check whether the fibre structure was damaged during the treatment, showed that no decrease in tensile strength or modulus occurred. Single fibre pullout tests showed a 30% increase in interfacial shear strength (IFSS) due to the laccase-mediated bonding of the coupling agent dopamine. These results demonstrate that a laccase + dopamine treatment modifies flax fibres sustainably and increases the interfacial strength towards epoxy.

Electrochemical Lignin Conversion

Lignin is the largest source of renewable aromatic compounds, making the recovery of aromatic compounds from this material a significant scientific goal. Recently, many studies have reported on lignin depolymerization and upgrading strategies. Electrochemical approaches are considered to be low cost, reagent free, and environmentally friendly, and can be carried out under mild reaction conditions. In this Review, different electrochemical lignin conversion strategies, including electrooxidation, electroreduction, hybrid electro-oxidation and reduction, and combinations of electrochemical and other processes (e. g., biological, solar) for lignin depolymerization and upgrading are discussed in detail. In addition to lignin conversion, electrochemical lignin fractionation from biomass and black liquor is also briefly discussed. Finally, the outlook and challenges for electrochemical lignin conversion are presented.

Antioxidant Activity of Synthetic Polymers of Phenolic Compounds

In recent years, developing potent antioxidants has been a very active area of research. In this context, phenolic compounds have been evaluated for their antioxidant activity. However, the use of phenolic compounds has also been limited by poor antioxidant activity in several in vivo studies. Polymeric phenols have received much attention owing to their potent antioxidant properties and increased stability in aqueous systems. To be truly effective in biological applications, it is important that these polymers be synthesized using benign methods. In this context, enzyme catalyzed synthesis of polymeric phenols has been explored as an environmentally friendly and safer approach. This review summarizes work in enzymatic syntheses of polymers of phenols. Several assays have been developed to determine the antioxidant potency of these polymeric phenols. These assays are discussed in detail along with structure-property relationships. A deeper understanding of factors affecting antioxidant activity would provide an opportunity for the design of versatile, high performing polymers with enhanced antioxidant activity.

Oxime radicals: generation, properties and application in organic synthesis

N-Oxyl radicals (compounds with an N-O• fragment) represent one of the richest families of stable and persistent organic radicals with applications ranging from catalysis of selective oxidation processes and mechanistic studies to production of polymers, energy storage, magnetic materials design and spectroscopic studies of biological objects. Compared to other N-oxyl radicals, oxime radicals (or iminoxyl radicals) have been underestimated for a long time as useful intermediates for organic synthesis, despite the fact that their precursors, oximes, are extremely widespread and easily available organic compounds. Furthermore, oxime radicals are structurally exceptional. In these radicals, the N-O• fragment is connected to an organic moiety by a double bond, whereas all other classes of N-oxyl radicals contain an R2N-O• fragment with two single C-N bonds. Although oxime radicals have been known since 1964, their broad synthetic potential was not recognized until the last decade, when numerous selective reactions of oxidative cyclization, functionalization, and coupling mediated by iminoxyl radicals were discovered. This review is focused on the synthetic methods based on iminoxyl radicals developed in the last ten years and also contains some selected data on previous works regarding generation, structure, stability, and spectral properties of these N-oxyl radicals. The reactions of oxime radicals are classified into intermolecular (oxidation by oxime radicals, oxidative C-O coupling) and intramolecular. The majority of works are devoted to intramolecular reactions of oxime radicals. These reactions are classified into cyclizations involving C-H bond cleavage and cyclizations involving a double C=C bond cleavage.

Enhanced Transformation of Emerging Contaminants by Permanganate in the Presence of Redox Mediators

In this study, a permanganate/redox mediator system for enhanced transformation of a series of emerging contaminants was evaluated. The presence of various redox mediators (i.e., 1-hydroxybenzotriazole, N-hydroxyphthalimide, violuric acid, syringaldehyde, vanillin, 4-hydroxycoumarin, and p-coumaric acid) accelerated the degradation of bisphenol A (BPA) by Mn(VII). Since 1-hydroxybenzotriazole (HBT) exhibited the highest reactive ability, it was selected to further investigate the reaction mechanisms and quantify the effects of important reaction parameters on Mn(VII)/redox-mediator reactions with BPA and bisphenol AF (BPAF). Interestingly, not only HBT accelerated the degradation of BPA, but also BPA enhanced the decay of HBT. Evidence for the in situ formation of HBT^· radicals as the active oxidant responsible for accelerated BPA and BPAF degradation was obtained by radical scavenging experiments and ³¹P NMR spin trapping techniques. The routes for HBT^· radical formation involving Mn(VII) and the electron-transfer pathway from BPA/BPAF to HBT^· radicals demonstrate that the Mn(VII)/HBT system was driven by the electron-transfer mechanism. Compared to Mn(VII) alone, the presence of HBT totally inhibited self-coupling of BPA and BPAF and promoted β-scission, hydroxylation, ring opening, and decarboxylation reactions. Moreover, Mn(VII)/HBT is also effective in real waters with the order of river water > wastewater treatment plant (WWTP) effluent > deionized water.

Electrochemical characteristics of the decolorization of three dyes by laccase mediator system (LMS) with synthetic and natural mediators

Laccase mediator system (LMS), a very attractive candidate for refractory organics biodegradation, harbors tremendous potential on industry application. However, the performance of LMS usually varies with the discrepancy of mediators and substrates in their chemical structures. Here, we adopt electrochemical analysis that is able to assess the degradation performance of various LMS on three different dyes by quantitative analysis of reaction outcome. Two mechanisms were suggested to explain the grafting of three mediators (1-Hydroxybenzotriazole, Violuric Acid and Acetosyringone), involving the transformation of proton or electron to produce active moieties, which subsequently react with target substrates. A thorough electrochemical insight into the redox features of mediators and its change in the presence of laccase and substrates were carried out using electrochemical analysis. The effectiveness of each kind of LMS on substrates was preliminarily evaluated by analyzing the change of the peak current and potential of mediators. The actual conversion rate of dyes was used to verify the analysis results, which confirms the important role of the stability of the oxidized form as well as their redox potential of the mediators in determining the mechanism of substrate oxidation. The application of electrochemical analysis in efficiency evaluation of LMS shed new light on effective selection of suitable mediators for degradation of refractory organics. It was therefore possible to prejudge the efficacy of LMS by analyzing the electrochemical parameters of target substances and mediators, which undoubtedly has broad further application prospects of LMS.

Biomimetic synthesis of galantamine via laccase/TEMPO mediated oxidative coupling

Laccase-mediated intramolecular oxidative radical coupling of N-formyl-2-bromo-O-methylnorbelladine afforded a novel and isolable spirocyclohexadienonic intermediate of galantamine.

Optimization of Laccase from Ganoderma lucidum Decolorizing Remazol Brilliant Blue R and Glac1 as Main Laccase-Contributing Gene

Many dyes and pigments are used in textile and printing industries, and their wastewater has been classed as a top source of pollution. Biodegradation of dyes by fungal laccase has great potential. In this work, the influence of reaction time, pH, temperature, dye concentration, metal ions, and mediators on laccase-catalyzed Remazol Brilliant Blue R dye (RBBR) decolorization were investigated in vitro using crude laccase from the white-rot fungus Ganoderma lucidum. The optimal decolorization percentage (50.3%) was achieved at 35 °C, pH 4.0, and 200 ppm RBBR in 30 min. The mediator effects from syringaldehyde, 1-hydroxybenzotriazole, and vanillin were compared, and 0.1 mM vanillin was found to obviously increase the decolorization percentage of RBBR to 98.7%. Laccase-mediated decolorization percentages significantly increased in the presence of 5 mM Na⁺ and Cu²⁺, and decolorization percentages reached 62.4% and 62.2%, respectively. Real-time fluorescence-quantitative PCR (RT-PCR) and protein mass spectrometry results showed that among the 15 laccase isoenzyme genes, Glac1 was the main laccase-contributing gene, contributing the most to the laccase enzyme activity and decolorization process. These results also indicate that under optimal conditions, G. lucidum laccases, especially Glac1, have a strong potential to remove RBBR from reactive dye effluent.

Laccase induced degradation of perfluorooctanoic acid in a soil slurry

Perfluorooctanoic acid (PFOA) can induce undesirable effects to humans and animals and has thus attracted much attention from the public and scientific communities in recent years. Extensive studies have been devoted to exploring PFOA degradation in aqueous phase, while information for that in soil is rather limited. Understanding the transformation of PFOA in soil is important in developing strategies to assess and manage its environmental fate. In this study, we have demonstrated that PFOA can be effectively degraded by enzyme catalyzed oxidative humification reactions (ECOHRs) with a natural organic material, soybean meal, as the mediator. In the presence of soybean meal and laccase, PFOA was degraded 24% in water after 36 days, 40% in soil slurry after 140 days. The water extract of soybean meal contained high concentrations of natural organic mediators and multivalent metal ions, both of which were essential to PFOA degradation by ECOHRs. The ECOHR degradation products of PFOA in soil were identified to be partially fluorinated organic compounds, and the molecular features of the products suggest that the degradation mechanism involves free radical chain reaction processes, which was initiated by direct free radical attacks on the CC bonds in perfluoroalkyl acids.

Chitin nanocrystals prepared by oxidation of α-chitin using the O2/laccase/TEMPO system

Laccase mediator oxidation was applied to chitin at pH 6.8 and 30 °C to prepare chitin nanocrystals with a catalytic amount of 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO). When 40 mM TEMPO and a total of 500 U laccase were added to 1 g chitin, the yield of water-insoluble oxidized chitin was more than 95%, and the carboxylate content was 0.43 mmol/g. Adsorption of laccase molecules on chitin particles occurred in a buffer at pH 6.8, which may have been caused by electrostatic interactions between positively charged C2-ammonium groups of chitin and anionically charged groups of laccase. Rod-like chitin nanocrystals (ChNCs) were obtained with average lengths and widths of 480 ± 200 nm and 24 ± 17 nm, respectively, by sonication of the oxidized chitin/water suspensions. The O₂/laccase/TEMPO oxidation caused no decrease in the degree of N-acetylation or the crystallinity of the original chitin based on FTIR and X-ray diffraction data.

Effect of Laccase-Mediated Biopolymer Grafting on Kraft Pulp Fibers for Enhancing Paper's Mechanical Properties

High-resistance paper was manufactured by laccase-grafting of carboxymethyl cellulose (CMC) and chitosan (CPX) on Kraft pulp fiber. The reaction was mediated in the presence of laccase by one of the following polyphenols in the presence of air: gallic acid (GA), vanillic acid (VA) and catechol (1,2–DHB). Enzyme was added at constant loading (24 kg ton⁻¹), 1% pulp consistency, 0.005% CMC, pH = 6.3 ± 0.5 and 2 mM of mediator. CPX content was assessed at two levels (0% and 0.005%). Treated pulps were analyzed by different mechanical tests (ring crush, mullen, corrugating medium test (CMT) flat crush of corrugating medium test and tension). An improvement in these parameters was obtained by biopolymer coupling and selected mediator. When using GA, three parameters increased more than 40%, while ring crush increased 120%. For the case of VA, properties were enhanced from 74% to 88% when CPX was added. For 1,2–DHB, there was not found a statistically significant difference between the results in the presence of CPX. Scanning electron microscopy, confocal microscopy, FTIR and ¹³C NMR were used in all papers in order to evaluate grafting. Hence, it was possible to correlate polymerization with an improvement of paper’s mechanical properties.

Laccase-Mediated Enhancement of the Antioxidant Activity of Propolis and Poplar Bud Exudates

The treatment of propolis and poplar bud exudates with laccase from Trametes versicolor and 2,2,6,6-tetramethyl-1-piperidinyloxy free radical increased the antioxidant activity, as evaluated by the 2,2'-diphenyl picrylhydrazyl (DPPH)- and t-butyl-OOH-induced DNA breakage comet assay analyses. The effect was highest for shorter reaction times. Propolis showed the highest antioxidant activity in the DPPH test, whereas poplar bud exudates were more active in reducing the t-butyl-OOH-induced lesions in the Chinese hamster ovary cell line. Even if the concentration of polyphenols decreased during the oxidation, the formation of low-molecular-weight phenols phloroglucinol 4 (1,3,5-trihydroxy benzene), hydroquinone 5 (1,4-dihydroxy benzene), and catechol 6 (1,2-dihydroxy benzene), characterized by the radical-scavenging activity, can account for the observed increase in the antioxidant activity.

Laccase catalyzed grafting of –N–OH type mediators to lignin via radical–radical coupling

Lignin can be functionalized with –N–OH type mediators via laccase catalysis. Three radical coupling mechanisms are suggested for this enzymatic “hetero-functionalization” which may be a new route for biomass lignin upgrading.

The chemistry, morphology, crystal structure and hydrophilicity properties of wood fibers treated by a magnetic immobilized laccase–mediator system

The chemistry, morphology, crystal structure and hydrophilicity properties of wood fibers treated by magnetic immobilized laccase–mediator system (ILMS) which had never previously been examined were investigated.

Oxidative cleavage of 1-aryl-isochroman derivatives using the Trametes villosa laccase/1-hydroxybenzotriazole system

Dimethyl carbonate was firstly used as a co-solvent in a green oxidative cleavage of 1-aryl-isochroman derivatives yielding useful synthetic intermediates of drugs.

Aerobic oxidation catalysis with stable radicals

Selective oxidation reactions are challenging when carried out on an industrial scale. Many traditional methods are undesirable from an environmental or safety point of view. There is a need to develop sustainable catalytic approaches that use molecular oxygen as the terminal oxidant. This review will discuss the use of stable radicals (primarily nitroxyl radicals) in aerobic oxidation catalysis. We will discuss the important advances that have occurred in recent years, highlighting the catalytic performance, mechanistic insights and the expanding synthetic utility of these catalytic systems.

Membrane bioprocesses for pharmaceutical micropollutant removal from waters

The purpose of this review work is to give an overview of the research reported on bioprocesses for the treatment of domestic or industrial wastewaters (WW) containing pharmaceuticals. Conventional WW treatment technologies are not efficient enough to completely remove all pharmaceuticals from water. Indeed, these compounds are becoming an actual public health problem, because they are more and more present in underground and even in potable waters. Different types of bioprocesses are described in this work: from classical activated sludge systems, which allow the depletion of pharmaceuticals by bio-degradation and adsorption, to enzymatic reactions, which are more focused on the treatment of WW containing a relatively high content of pharmaceuticals and less organic carbon pollution than classical WW. Different aspects concerning the advantages of membrane bioreactors for pharmaceuticals removal are discussed, as well as the more recent studies on enzymatic membrane reactors to the depletion of these recalcitrant compounds.

Laccase-mediator system for alcohol oxidation to carbonyls or carboxylic acids: toward a sustainable synthesis of profens

By combining two green and efficient catalysts, such as the commercially available enzyme laccase from Trametes versicolor and the stable free radical 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO), the oxidation in water of some primary alcohols to the corresponding carboxylic acids or aldehydes and of selected secondary alcohols to ketones can be accomplished. The range of applicability of bio-oxidation is widened by applying the optimized protocol to the oxidation of enantiomerically pure 2-arylpropanols (profenols) into the corresponding 2-arylpropionic acids (profens), in high yields and with complete retention of configuration.

Mechanisms of laccase-mediator treatments improving the enzymatic hydrolysis of pre-treated spruce

BACKGROUND

The recalcitrance of softwood to enzymatic hydrolysis is one of the major bottlenecks hindering its profitable use as a raw material for platform sugars. In softwood, the guaiacyl-type lignin is especially problematic, since it is known to bind hydrolytic enzymes non-specifically, rendering them inactive towards cellulose. One approach to improve hydrolysis yields is the modification of lignin and of cellulose structures by laccase-mediator treatments (LMTs).

RESULTS

LMTs were studied to improve the hydrolysis of steam pre-treated spruce (SPS). Three mediators with three distinct reaction mechanisms (ABTS, HBT, and TEMPO) and one natural mediator (AS, that is, acetosyringone) were tested. Of the studied LMTs, laccase-ABTS treatment improved the degree of hydrolysis by 54%, while acetosyringone and TEMPO increased the hydrolysis yield by 49% and 36%, respectively. On the other hand, laccase-HBT treatment improved the degree of hydrolysis only by 22%, which was in the same order of magnitude as the increase induced by laccase treatment without added mediators (19%). The improvements were due to lignin modification that led to reduced adsorption of endoglucanase Cel5A and cellobiohydrolase Cel7A on lignin. TEMPO was the only mediator that modified cellulose structure by oxidizing hydroxyls at the C6 position to carbonyls and partially further to carboxyls. Oxidation of the reducing end C1 carbonyls was also observed. In contrast to lignin modification, oxidation of cellulose impaired enzymatic hydrolysis.

CONCLUSIONS

LMTs, in general, improved the enzymatic hydrolysis of SPS. The mechanism of the improvement was shown to be based on reduced adsorption of the main cellulases on SPS lignin rather than cellulose oxidation. In fact, at higher mediator concentrations the advantage of lignin modification in enzymatic saccharification was overcome by the negative effect of cellulose oxidation. For future applications, it would be beneficial to be able to understand and modify the binding properties of lignin in order to decrease unspecific enzyme binding and thus to increase the mobility, action, and recyclability of the hydrolytic enzymes.

Role of laccase as an enzymatic pretreatment method to improve lignocellulosic saccharification

The saccharification of wheat straw was improved when an incubation step was performed withTrametes versicolorlaccase (TvL) and the mediator 1-hydroxybenzotriazole (1-HBT) prior to an alkaline peroxide extraction (APE).

Enzymatic polymerization of sodium lignosulfonates: effect of catalysts, initial molecular weight, and mediators

The aim of this study was to investigate the effect of different parameters on the enzymatic polymerization of sodium lignosulfonates (SLS) by laccase, compared with the chemical treatment by manganese III. Different initial molecular weights of SLS (commercial SLS (17 800 Da), F1 (4300 Da), F2 (2500 Da), and F3 (2300 Da)) were tested. Size exclusion chromatography (SEC-UV), Fourier transform infrared (FT-IR) and phenolic group determination showed that SLS molecular weight increases depending on the laccase origin, the enzyme, and the substrate concentrations and the initial molecular weight of the SLS fractions. The highest molecular weight (Mw) was obtained by fungal laccases, specifically when using laccase from Trametes versicolor, while no reactivity was observed by plant laccase (laccase from Rhus vernicifera). The largest increase of Mw (108 600 Da) is reached when using SLS (17 800 Da) at 50 g/L and 30 U/mL of laccase from Trametes versicolor. The laccase polymerization of SLS can be improved by the use of a mediator. In this study, 5 mediators were studied for F1 polymerization by laccase from Trametes versicolor: acetosyringone (ASG), violuric acid (VLA), 1-hydroxy-benzotriazole (HBT), acetovanillone (ACV) and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS). Results of F1 polymerization with mediators showed that only ASG and VLA lead to a higher molecular weight (7500 Da) compared with reactions carried without a mediator (6600 Da).