Application of conductive polymer hydrogels in flexible electronics

Self-healing, piezoresistive and temperature responsive behaviour of chitosan/polyacrylic acid dynamic hydrogels

Flexible electronics have introduced new challenges for efficient human-machine interactions. Hydrogels have emerged as prominent materials for electronic wearable applications due to their exceptional mechanical deformability and lightweight characteristics combined in some cases with conductive properties, and softness. Additionally, bio-interphases require multisensory response to stress, strain, temperature, and self-healing capacity. To mimic these properties, this work developed interpenetrated hydrogel networks composed of chitosan (CHI) and polyacrylic acid (PAA), combined with Fe (III) ions and varying amounts of NMBA (0-0.25 %), to achieve tailored conductivity (0.8-2.5 mS/cm), self-healing, self-standing and mechanical properties (E = 11.7-110 Pa and fracture strain = 64.9-1923 %) suitable for strain sensor applications. The results revealed a significant influence of the restrictive effect on the mobility of uncrosslinked chain segments, caused by Fe ions and NMBA, on the piezoresistance (GF 2.1-1.3) and self-healing capability of the gels. Interestingly, a transparent/turbid transition, driven by microphase separation that is characteristic of systems with high dynamic interactions, was encountered for the first time in these hydrogels. This transition was analyzed in relation to external temperature, water content, pH, and the influence of Fe ions and NMBA. The simultaneous sensitivity of these materials to temperature and pH, along with their piezoresistive and self-healing behaviour, can be highly valuable for multifunctional sensors in a wide range of applications.

Nanoarchitectonics of a Skin-Like Polymeric Hydrogel with High Anti-Swelling and Self-Adhesion Performance for Underwater Communication

Hydrogels are flexible materials characterized by a 3D network structure, which possess high water content and adjustable physicochemical properties. They have found widespread applications in tissue engineering, electronic skin, drug delivery, flexible sensors, and photothermal therapy. However, hydrogel networks often exhibit swelling behavior in aqueous environments, which can result in structural degradation and a loss of gel performance. In this study, polyacrylic acid is utilized as the primary network structure with the incorporation of the natural polymer chitosan. Furthermore, a conductive hydrogel exhibiting good mechanical strength similar to human skin and excellent anti-swelling properties is developed by integrating phytic acid into the hydrogel network. The as-prepared hydrogels exhibited maximum swelling in pure water, achieving an equilibrium swelling rate of 15%. Additionally, a dopamine-grafted polyacrylic acid binder is synthesized through a coupling reaction to enhance the adhesion of the hydrogels to various substrates. The hydrogels demonstrated strong adhesion properties with different substrates. Whether in the air or underwater, the hydrogel sensor effectively monitors human movement behaviors. Furthermore, by utilizing the sensing signals to send Morse code, the hydrogel sensor can facilitate underwater communication. This type of hydrogel sensor is anticipated to play a significant role in wearable sensing applications and underwater communication.

High-strength polyvinyl alcohol/gelatin/LiCl dual-network conductive hydrogel for multifunctional sensors and supercapacitors

The synthesis of conductive hydrogels with high mechanical strength, toughness, optimal fracture growth rate and the capability to detect diverse human body movements poses a significant challenge in the realm of flexible electronics. In this study, a one-pot technique utilized effectively to fabricate conductive materials by doping LiCl into a mixture of polyvinyl alcohol (PVA) and gelatin. The PVA/gelatin/LiCl0.3(PGL) conductive hydrogel demonstrates exceptional robustness, flexibility, and resistance to deformation, enabling the monitoring of various physiological signals such as temperature and humidity. Additionally, the PGL demonstrates exceptional elongation properties (up to 1111.32 %), high lifting capacity (up to 25 kg), resistance to deformation, and sustained stability of peak signals even after 300 cycles at 50 % strain. The hydrogel electrolyte exhibits a conductivity of 2.114 S/m at 25 °C and a specific capacitance of up to 48.75 F/g, along with favorable mechanical and electrochemical characteristics. These findings suggest that the PVA/gelatin/LiCl0.3 hydrogel supercapacitor (PGLSC) conductive hydrogel shows significant potential for integration into flexible electronics and wearable technology devices.

Advances of conductive hydrogel designed for flexible electronics: A review

In recent years, there has been considerable attention devoted to flexible electronic devices within the realm of biomedical engineering. These devices demonstrate the capability to accurately capture human physiological signals, thereby facilitating efficient human-computer interaction, and providing a novel approach of flexible electronics for monitoring and treating related diseases. A notable contribution to this domain is the emergence of conductive hydrogels as a novel flexible electronic material. Renowned for their exceptional flexibility, adjustable electrical conductivity, and facile processing, conductive hydrogels have emerged as the preferred material for designing and fabricating innovative flexible electronic devices. This paper provides a comprehensive review of the recent advancements in flexible electronic devices rooted in conductive hydrogels. It offers an in-depth exploration of existing synthesis strategies for conductive hydrogels and subsequently examines the latest progress in their applications, including flexible neural electrodes, sensors, energy storage devices and soft robots. The analysis extends to the identification of technological challenges and developmental opportunities in both the synthesis of new conductive hydrogels and their application in the dynamic field of flexible electronics.

E-Skin and Its Advanced Applications in Ubiquitous Health Monitoring

E-skin is a bionic device with flexible and intelligent sensing ability that can mimic the touch, temperature, pressure, and other sensing functions of human skin. Because of its flexibility, breathability, biocompatibility, and other characteristics, it is widely used in health management, personalized medicine, disease prevention, and other pan-health fields. With the proposal of new sensing principles, the development of advanced functional materials, the development of microfabrication technology, and the integration of artificial intelligence and algorithms, e-skin has developed rapidly. This paper focuses on the characteristics, fundamentals, new principles, key technologies, and their specific applications in health management, exercise monitoring, emotion and heart monitoring, etc. that advanced e-skin needs to have in the healthcare field. In addition, its significance in infant and child care, elderly care, and assistive devices for the disabled is analyzed. Finally, the current challenges and future directions of the field are discussed. It is expected that this review will generate great interest and inspiration for the development and improvement of novel e-skins and advanced health monitoring systems.

Straightforward Production Methods for Diverse Porous PEDOT:PSS Structures and Their Characterization

Porous conductive polymer structures, in particular Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) structures, are gaining in importance due to their versatile fields of application as sensors, hydrogels, or supercapacitors, to name just a few. Moreover, (porous) conducting polymers have become of interest for wearable and smart textile applications due to their biocompatibility, which enables applications with direct skin contact. Therefore, there is a huge need to investigate distinct, straightforward, and textile-compatible production methods for the fabrication of porous PEDOT:PSS structures. Here, we present novel and uncomplicated approaches to producing diverse porous PEDOT:PSS structures and characterize them thoroughly in terms of porosity, electrical resistance, and their overall appearance. Production methods comprise the incorporation of micro cellulose, the usage of a blowing agent, creating a sponge-like structure, and spraying onto a porous base substrate. This results in the fabrication of various porous structures, ranging from thin and slightly porous to thick and highly porous. Depending on the application, these structures can be modified and integrated into electronic components or wearables to serve as porous electrodes, sensors, or other functional devices.

Conductive Polymer-Based Hydrogels for Wearable Electrochemical Biosensors

Hydrogels are gaining popularity for use in wearable electronics owing to their inherent biomimetic characteristics, flexible physicochemical properties, and excellent biocompatibility. Among various hydrogels, conductive polymer-based hydrogels (CP HGs) have emerged as excellent candidates for future wearable sensor designs. These hydrogels can attain desired properties through various tuning strategies extending from molecular design to microstructural configuration. However, significant challenges remain, such as the limited strain-sensing range, significant hysteresis of sensing signals, dehydration-induced functional failure, and surface/interfacial malfunction during manufacturing/processing. This review summarizes the recent developments in polymer-hydrogel-based wearable electrochemical biosensors over the past five years. Initially serving as carriers for biomolecules, polymer-hydrogel-based sensors have advanced to encompass a wider range of applications, including the development of non-enzymatic sensors facilitated by the integration of nanomaterials such as metals, metal oxides, and carbon-based materials. Beyond the numerous existing reports that primarily focus on biomolecule detection, we extend the scope to include the fabrication of nanocomposite conductive polymer hydrogels and explore their varied conductivity mechanisms in electrochemical sensing applications. This comprehensive evaluation is instrumental in determining the readiness of these polymer hydrogels for point-of-care translation and state-of-the-art applications in wearable electrochemical sensing technology.

Wired for Success: Probing the Effect of Tissue-Engineered Neural Interface Substrates on Cell Viability

This study investigates the electrochemical behavior of GelMA-based hydrogels and their interactions with PC12 neural cells under electrical stimulation in the presence of conducting substrates. Focusing on indium tin oxide (ITO), platinum, and gold mylar substrates supporting conductive scaffolds composed of hydrogel, graphene oxide, and gold nanorods, we explored how the substrate materials affect scaffold conductivity and cell viability. We examined the impact of an optimized electrical stimulation protocol on the PC12 cell viability. According to our findings, substrate selection significantly influences conductive hydrogel behavior, affecting cell viability and proliferation as a result. In particular, the ITO substrates were found to provide the best support for cell viability with an average of at least three times higher metabolic activity compared to platinum and gold mylar substrates over a 7 day stimulation period. The study offers new insights into substrate selection as a platform for neural cell stimulation and underscores the critical role of substrate materials in optimizing the efficacy of neural interfaces for biomedical applications. In addition to extending existing work, this study provides a robust platform for future explorations aimed at tailoring the full potential of tissue-engineered neural interfaces.

Recent Advances in Environmentally Friendly Dual-crosslinking Polymer Networks

Environmentally friendly crosslinked polymer networks feature degradable covalent or non-covalent bonds, with many of them manifesting dynamic characteristics. These attributes enable convenient degradation, facile reprocessibility, and self-healing capabilities. However, the inherent instability of these crosslinking bonds often compromises the mechanical properties of polymer networks, limiting their practical applications. In this context, environmentally friendly dual-crosslinking polymer networks (denoted EF-DCPNs) have emerged as promising alternatives to address this challenge. These materials effectively balance the need for high mechanical properties with the ability to degrade, recycle, and/or self-heal. Despite their promising potential, investigations into EF-DCPNs remain in their nascent stages, and several gaps and limitations persist. This Review provides a comprehensive overview of the synthesis, properties, and applications of recent progress in EF-DCPNs. Firstly, synthetic routes to a rich variety of EF-DCPNs possessing two distinct types of dynamic bonds (i.e., imine, disulfide, ester, hydrogen bond, coordination bond, and other bonds) are introduced. Subsequently, complex structure- and dynamic nature-dependent mechanical, thermal, and electrical properties of EF-DCPNs are discussed, followed by their exemplary applications in electronics and biotechnology. Finally, future research directions in this rapidly evolving field are outlined.

Advances in Material-Assisted Electromagnetic Neural Stimulation

Bioelectricity plays a crucial role in organisms, being closely connected to neural activity and physiological processes. Disruptions in the nervous system can lead to chaotic ionic currents at the injured site, causing disturbances in the local cellular microenvironment, impairing biological pathways, and resulting in a loss of neural functions. Electromagnetic stimulation has the ability to generate internal currents, which can be utilized to counter tissue damage and aid in the restoration of movement in paralyzed limbs. By incorporating implanted materials, electromagnetic stimulation can be targeted more accurately, thereby significantly improving the effectiveness and safety of such interventions. Currently, there have been significant advancements in the development of numerous promising electromagnetic stimulation strategies with diverse materials. This review provides a comprehensive summary of the fundamental theories, neural stimulation modulating materials, material application strategies, and pre-clinical therapeutic effects associated with electromagnetic stimulation for neural repair. It offers a thorough analysis of current techniques that employ materials to enhance electromagnetic stimulation, as well as potential therapeutic strategies for future applications.

Thermogalvanic hydrogel-based e-skin for self-powered on-body dual-modal temperature and strain sensing

Sensing of both temperature and strain is crucial for various diagnostic and therapeutic purposes. Here, we present a novel hydrogel-based electronic skin (e-skin) capable of dual-mode sensing of temperature and strain. The thermocouple ion selected for this study is the iodine/triiodide (I-/I3-) redox couple, which is a common component in everyday disinfectants. By leveraging the thermoelectric conversion in conjunction with the inherent piezoresistive effect of a gel electrolyte, self-powered sensing is achieved by utilizing the temperature difference between the human body and the external environment. The composite hydrogels synthesized from polyvinyl alcohol (PVA) monomers using a simple freeze‒thaw method exhibit remarkable flexibility, extensibility, and adaptability to human tissue. The incorporation of zwitterions further augments the resistance of the hydrogel to dehydration and low temperatures, allowing maintenance of more than 90% of its weight after 48 h in the air. Given its robust thermal current response, the hydrogel was encapsulated and then integrated onto various areas of the human body, including the cheeks, fingers, and elbows. Furthermore, the detection of the head-down state and the monitoring of foot movements demonstrate the promising application of the hydrogel in supervising the neck posture of sedentary office workers and the activity status. The successful demonstration of self-powered on-body temperature and strain sensing opens up new possibilities for wearable intelligent electronics and robotics.

pH sensor based on tilted fiber Bragg grating surface plasmon resonance with a polyaniline reaction deposition film layer

In this paper, we propose a surface plasmon resonance (SPR) fiber-optic pH sensor combined with a tilted fiber Bragg grating (TFBG) by continuously coating gold and polyaniline (PANI) onto the surface of a TFBG. The micron-scale thickness polyaniline film provides the sensor with good sensitivity, and it achieves accurate measurement of pH values ranging from 2 to 12 by utilizing the pH-responsive mechanism of PANI and the surface plasmon resonance characteristics. Experimental results show that within the 2-12 pH range, the sensitivity of the TFBG surface plasmon resonance pH sensor based on PANI coating is 0.50335 nm/pH, and results demonstrate, a linear correlation coefficient between wavelength and pH value reaching 0.96614. This indicates significant potential for future engineering applications in real-world pH measurement using this sensor.

Modified Wood Fibers Spontaneously Harvest Electricity from Moisture

With the rapid development of modern society, our demand for energy is increasing. And the extensive use of fossil energy has triggered a series of problems such as an energy crisis and environmental pollution. A moisture-enabled electric generator (MEG) is a new type of energy conversion method, which can directly convert the ubiquitous moisture in the air into electrical energy equipment. It has attracted great interest for its renewable and environmentally friendly qualities. At present, most MEGs still have low power density, strong dependence on high humidity, and high cost. Herein, we report the development of a high-efficiency MEG based on a lignocellulosic fiber frame with high-power-density, all-weather, and low-cost characteristics using a simple strategy that optimizes the charge transport channel and ion concentration difference. The MEG devices we manufactured can generate the open-circuit voltage of 0.73 V and the short-circuit current of 360 μA, and the voltage can still reach 0.6 V at less than 30% humidity. It is possible to drive commercial electronic devices such as light-emitting diodes, electronic displays, and electronic calculators by simply connecting several electric generators in series. Biomass-based moisture-enabled electric generation has a low cost, is easy to integrate on a large scale, and is green and pollution-free, providing clean energy for low-humidity or high-electricity-cost areas.

Doping Engineering of Conductive Polymers and Their Application in Physical Sensors for Healthcare Monitoring

Physical sensors have emerged as a promising technology for real-time healthcare monitoring, which tracks various physical signals from the human body. Accurate acquisition of these physical signals from biological tissue requires excellent electrical conductivity and long-term durability of the sensors under complex mechanical deformation. Conductive polymers, combining the advantages of conventional polymers and organic conductors, are considered ideal conductive materials for healthcare physical sensors due to their intrinsic conductive network, tunable mechanical properties, and easy processing. Doping engineering has been proposed as an effective approach to enhance the sensitivity, lower the detection limit, and widen the operational range of sensors based on conductive polymers. This approach enables the introduction of dopants into conductive polymers to adjust and control the microstructure and energy levels of conductive polymers, thereby optimizing their mechanical and conductivity properties. This review article provides a comprehensive overview of doping engineering methods to improve the physical properties of conductive polymers and highlights their applications in the field of healthcare physical sensors, including temperature sensors, strain sensors, stress sensors, and electrophysiological sensing. Additionally, the challenges and opportunities associated with conductive polymer-based physical sensors in healthcare monitoring are discussed.

Resilient and Tough Conductive Polymer Hydrogel for a Low-Hysteresis Strain Sensor

Conductive polymer hydrogels are vital in strain sensors, yet achieving high resilience and toughness is a challenge. This study employs a prestretch method to engineer a tough conductive polymer hydrogel with sufficient resilience. Initially, a blend film of polyvinylalcohol (PVA) and ethylene-vinyl alcohol copolymer (EVOH) is prepared through solution casting, followed by a swelling process to form a PVA-EVOH hydrogel. This hydrogel, with PVA crystallites as crosslinking points, exhibits high toughness. The hydrogel is then immersed in pyrrole and ferric chloride solutions for in-situ polymerization of polypyrrole (PPy), creating a conductive PPy/PVA-EVOH hydrogel. Finally, a 200% prestretch is applied, breaking short chains within the network, eliminating energy dissipation at low strains. This results in a hydrogel with a 100% elastic deformation range, while maintaining high fracture toughness (1700 J m-2 ). The prestretched PPy/PVA-EVOH hydrogel functions as a strain sensor with low hysteresis, providing consistent strain measurements during loading and unloading. This outperforms the non-prestretched sample, which shows inconsistent responses between stretching and releasing.

Conducting polymer-based scaffolds for neuronal tissue engineering

Neuronal tissue engineering has immense potential for treating neurological disorders and facilitating nerve regeneration. Conducting polymers (CPs) have emerged as a promising class of materials owing to their unique electrical conductivity and biocompatibility. CPs, such as poly(3,4-ethylenedioxythiophene) (PEDOT), poly(3-hexylthiophene) (P3HT), polypyrrole (PPy), and polyaniline (PANi), have been extensively explored for their ability to provide electrical cues to neural cells. These polymers are widely used in various forms, including porous scaffolds, hydrogels, and nanofibers, and offer an ideal platform for promoting cell adhesion, differentiation, and axonal outgrowth. CP-based scaffolds can also serve as drug delivery systems, enabling localized and controlled release of neurotrophic factors and therapeutic agents to enhance neural regeneration and repair. CP-based scaffolds have demonstrated improved neural regeneration, both in vitro and in vivo, for treating spinal cord and peripheral nerve injuries. In this review, we discuss synthesis and scaffold processing methods for CPs and their applications in neuronal tissue regeneration. We focused on a detailed literature review of the central and peripheral nervous systems.

Fluorescence-readout as a powerful macromolecular characterisation tool

The last few decades have witnessed significant progress in synthetic macromolecular chemistry, which can provide access to diverse macromolecules with varying structural complexities, topology and functionalities, bringing us closer to the aim of controlling soft matter material properties with molecular precision. To reach this goal, the development of advanced analytical techniques, allowing for micro-, molecular level and real-time investigation, is essential. Due to their appealing features, including high sensitivity, large contrast, fast and real-time response, as well as non-invasive characteristics, fluorescence-based techniques have emerged as a powerful tool for macromolecular characterisation to provide detailed information and give new and deep insights beyond those offered by commonly applied analytical methods. Herein, we critically examine how fluorescence phenomena, principles and techniques can be effectively exploited to characterise macromolecules and soft matter materials and to further unravel their constitution, by highlighting representative examples of recent advances across major areas of polymer and materials science, ranging from polymer molecular weight and conversion, architecture, conformation to polymer self-assembly to surfaces, gels and 3D printing. Finally, we discuss the opportunities for fluorescence-readout to further advance the development of macromolecules, leading to the design of polymers and soft matter materials with pre-determined and adaptable properties.

Adhesive Ion-Conducting Hydrogel Strain Sensor with High Sensitivity, Long-Term Stability, and Extreme Temperature Tolerance

Ion-conducting hydrogels with excellent flexibility and ductility have great potential in human movements monitoring. However, some obstacles, including a small detection range, low sensitivity, low electrical conductivity, and poor stability under extreme conditions, impede their use as sensors. Herein, an ion-conducting hydrogel comprising acrylamide (AM), lauryl methacrylate (LMA), 2-acrylamido-2-methylpropanesulfonic acid (AMPS), and a water/glycerol binary solvent (named the AM-LMA-AMPS-LiCl (water/glycerol) hydrogel) is designed, which exhibits an enlarged detection range of 0%-1823% and improved transparency. Notably, the ion channel constructed using AMPS and LiCl significantly improves the sensitivity (gauge factor = 22.15 ± 2.86) of the hydrogel. The water/glycerol binary solvent endows the hydrogel with electrical and mechanical stability under extreme conditions (70 and -80 °C). Furthermore, the AM-LMA-AMPS-LiCl (water/glycerol) hydrogel exhibits antifatigue properties for 10 cycles (0%-1000%) because of noncovalent interactions such as hydrophobic interactions and hydrogen bonding. The hydrogel can be used to monitor human movements such as joint bending and perceive subtle discrepancies such as different joint bending speeds and angles, showing its great potential application in human movement monitoring, electronic skin, and wearable devices.

Stimuli-bioresponsive hydrogels as new generation materials for implantable, wearable, and disposable biosensors for medical diagnostics: Principles, opportunities, and challenges

Hydrogels are excellent water-swollen polymeric materials for use in wearable, implantable, and disposable biosensors. Hydrogels have unique properties such as low cost, ease of preparation, transparency, rapid response to external conditions, biocompatibility and self-adhesion to the skin, flexibility, and strain sensitivity, making them ideal for use in biosensor platforms. This review provides a detailed overview of advanced applications of stimuli-responsive hydrogels in biosensor platforms, from hydrogel synthesis and functionalization for bioreceptor immobilization to several important diagnostic applications. Emphasis is placed on recent advances in the fabrication of ultrasensitive fluorescent and electrically conductive hydrogels and their applications in wearable, implantable, and disposable biosensors for quantitative measurements. Design, modification, and assembly techniques of fluorescent, ionically conductive, and electrically conductive hydrogels to improve performance will be addressed. The advantages and performance improvements of immobilizing bioreceptors (e.g., antibodies, enzymes, and aptamers), and incorporating fluorescent and electrically conductive nanomaterials are described, as are their limitations. Potential applications of hydrogels in implantable, wearable, disposable portable biosensors for quantitative detection of the various bioanalytes (ions, molecules, drugs, proteins, and biomarkers) are discussed. Finally, the global market for hydrogel-based biosensors and future challenges and prospects are discussed in detail.

Transparent, Stretchable, and Adhesive Conductive Ionic Hydrogel-Based Self-Powered Sensors for Smart Elderly Care Systems

Nowadays, with the intensification of the aging society, the demand for elderly care and medical services is increasing and the elderly care and health systems are facing serious challenges. Therefore, it is imperative to develop a smart elderly care system to achieve real-time interaction between the elderly, the community, and medical personnel and to improve the efficiency of caring for the elderly. Here, we prepared ionic hydrogels with stable properties of high mechanical strength, high electrical conductivity, and high transparency by the one-step immersion method and used them in self-powered sensors for smart elderly care systems. The complexation of Cu²⁺ ions with polyacrylamide (PAAm) endows ionic hydrogels with excellent mechanical properties and electrical conductivity. Meanwhile, potassium sodium tartrate prevents the generated complex ions from precipitating into precipitates, thus ensuring the transparency of the ionic conductive hydrogel. After optimization, the transparency, tensile strength, elongation at break, and conductivity of the ionic hydrogel reached 94.1% at 445 nm, 192 kPa, 1130%, and 6.25 S/m, respectively. By processing and coding the collected triboelectric signals, a self-powered human-machine interaction system attached to the finger of the elderly was developed. The elderly can complete the transmission of distress and basic needs by simply bending their fingers, greatly reducing the pressure of inadequate medical care in an aging society. This work demonstrates the value of self-powered sensors in the field of smart elderly care systems, showing a wide implication in human-computer interface.

Fully physical crosslinked BSA-based conductive hydrogels with high strength and fast self-recovery for human motion and wireless electrocardiogram sensing

The emergence of protein hydrogel sensors has attracted intensive attention because of their biocompatibility and biodegradability, and potential application in wearable electronics. However, natural protein hydrogel sensors commonly exhibited low conductivity, weak mechanical strength, and unsatisfactory self-recovery performance. Herein, a fully physical crosslinked conductive BSA-MA-PPy/P(AM-co-AA)/Fe³⁺ hydrogel based on methacrylic anhydride (MA)-modified and polypyrrole (PPy)-functionalized bovine serum albumin (BSA) introduced into poly(acrylamide-co-acrylic acid) (P(AM-co-AA)) matrix was constructed. Due to the presence of the hydrogen bond complexation and the metal-ligand coordination between ferric ion (Fe³⁺) and the polymer chain, the as-prepared hydrogel showed outstanding mechanical strength (5.36 MPa tensile stress, 17.66 MJ/m³ toughness, and 1.61 MPa elastic modulus) and fast self-recovery performance (99.89 %/96.18 %/93.57 % stress/elastic modulus/dissipated energy within 10 min at room temperature). Meanwhile, the hydrogel exhibited outstanding conductivity (1.13 S/m) due to the presence of PPy and Fe³⁺ moieties, high strain sensitivity (GF = 4.98) and good biocompatibility without causing skin allergic reactions. Thus, the hydrogel can be fabricated into strain sensor to monitor the joint motion of the human body. Moreover, it can be used as soft electrode in electrocardiogram device to realize wireless heart-rate monitoring in the real-time conditions (relaxation and post-exercising), which exhibited excellent reusability, stability, and reliability simultaneously.

Self-Healing, Flexible and Smart 3D Hydrogel Electrolytes Based on Alginate/PEDOT:PSS for Supercapacitor Applications

Hydrogel electrolytes for energy storage devices have made great progress, yet they present a major challenge in the assembly of flexible supercapacitors with high ionic conductivity and self-healing properties. Herein, a smart self-healing hydrogel electrolyte based on alginate/poly (3,4-ethylenedioxythiophene):poly(styrenesulfonate) (alginate/PEDOT:PSS)(A/P:P) was prepared, wherein H₂SO₄ was employed as a polymeric initiator, as well as a source of ions. PEDOT:PSS is a semi-interpenetrating network (IPN) that has been used in recent studies to exhibit quick self-healing properties with the H₂SO₃ additive, which further improves its mechanical strength and self-healing performance. A moderate amount of PEDOT:PSS in the hydrogel (5 mL) was found to significantly improve the ionic conductivity compared to the pure hydrogel of alginate. Interestingly, the alginate/PEDOT:PSS composite hydrogel exhibited an excellent ability to self-heal and repair its original composition within 10 min of cutting. Furthermore, the graphite conductive substrate-based supercapacitor with the alginate/PEDOT:PSS hydrogel electrolyte provided a high specific capacitance of 356 F g^-1 at 100 mV/s g^-1. The results demonstrate that the A/P:P ratio with 5 mL PEDOT:PSS had a base sheet resistance of 0.9 Ω/square. This work provides a new strategy for designing flexible self-healing hydrogels for application in smart wearable electronics.

Recent Advances and Progress of Conducting Polymer-Based Hydrogels in Strain Sensor Applications

Conducting polymer-based hydrogels (CPHs) are novel materials that take advantage of both conducting polymers and three-dimensional hydrogels, which endow them with great electrical properties and excellent mechanical features. Therefore, CPHs are considered as one of the most promising platforms for employing wearable and stretchable strain sensors in practical applications. Herein, we provide a critical review of distinct features and preparation technologies and the advancements in CPH-based strain sensors for human motion and health monitoring applications. The fundamentals, working mechanisms, and requirements for the design of CPH-based strain sensors with high performance are also summarized and discussed. Moreover, the recent progress and development strategies for the implementation of CPH-based strain sensors are pointed out and described. It has been surmised that electronic skin (e-skin) sensors are the upward tendency in the development of CPHs for wearable strain sensors and human health monitoring. This review will be important scientific evidence to formulate new approaches for the development of CPH-based strain sensors in the present and in the future.

Stretchable and Electroactive Crosslinked Gelatin for Biodevice and Cell Culture Applications

Biomimetic substrates that incorporate functionality such as electroactivity and mechanical flexibility, find utility in a variety of biomedical applications. Toward these uses, nature-derived materials such as gelatin offer inherent biocompatibility and sustainable sourcing. However, issues such as high swelling, poor mechanical properties, and lack of stability at biological temperatures limit their use. The enzymatic crosslinking of gelatin via microbial transglutaminase (mTG) yields flexible and robust large area substrates that are stable under physiological conditions. Here, we demonstrate the fabrication and characterization of strong, stretchable, conductive mTG crosslinked gelatin thin films. Incorporation of the conductive polymer poly(3,4-ethylenedioxythiophene) polystyrene sulfonate in the gel matrix with a bioinspired polydopamine surface coating is used to enable conductivity with enhanced mechanical properties such as extensibility and flexibility, in comparison to plain gelatin or crosslinked gelatin films. The electroconductive substrates are conducive to cell growth, supporting myoblast cell adhesion, viability, and proliferation and could find use in creating active cell culture systems incorporating electrical stimulation. The substrates are responsive to motion such as stretching and bending while being extremely handleable and elastic, making them useful for applications such as electronic skin and flexible bioelectronics. Overall, this work presents facile, yet effective development of bioinspired conductive composites as substrates for bio-integrated devices and functional tissue engineering.

Recent Developments and Implementations of Conductive Polymer-Based Flexible Devices in Sensing Applications

Flexible sensing devices have attracted significant attention for various applications, such as medical devices, environmental monitoring, and healthcare. Numerous materials have been used to fabricate flexible sensing devices and improve their sensing performance in terms of their electrical and mechanical properties. Among the studied materials, conductive polymers are promising candidates for next-generation flexible, stretchable, and wearable electronic devices because of their outstanding characteristics, such as flexibility, light weight, and non-toxicity. Understanding the interesting properties of conductive polymers and the solution-based deposition processes and patterning technologies used for conductive polymer device fabrication is necessary to develop appropriate and highly effective flexible sensors. The present review provides scientific evidence for promising strategies for fabricating conductive polymer-based flexible sensors. Specifically, the outstanding nature of the structures, conductivity, and synthesis methods of some of the main conductive polymers are discussed. Furthermore, conventional and innovative technologies for preparing conductive polymer thin films in flexible sensors are identified and evaluated, as are the potential applications of these sensors in environmental and human health monitoring.