Aqueous RAFT polymerization of 2-aminoethyl methacrylate to produce well-defined, primary amine functional homo- and copolymers

HER2 aptamer-conjugated iron oxide nanoparticles with PDMAEMA-b-PMPC coating for breast cancer cell identification

Aim: To synthesize HER2 aptamer-conjugated iron oxide nanoparticles with a coating of poly(2-(dimethylamino) ethyl methacrylate)-poly(2-methacryloyloxyethylphosphorylcholine) block copolymer (IONPPPs). Methods: Characterization covered molecular structure, chemical composition, thermal stability, magnetic characteristics, aptamer interaction, crystalline nature and microscopic features. Subsequent investigations focused on IONPPPs for in vitro cancer cell identification. Results: Results demonstrated high biocompatibility of the diblock copolymer with no significant toxicity up to 150 μg/ml. The facile coating process yielded the IONPP complex, featuring a 13.27 nm metal core and a 3.10 nm polymer coating. Functionalized with a HER2-targeting DNA aptamer, IONPPP enhanced recognition in HER2-amplified SKBR3 cells via magnetization separation. Conclusion: These findings underscore IONPPP's potential in cancer research and clinical applications, showcasing diagnostic efficacy and HER2 protein targeting in a proof-of-concept approach.

CO2 Capture and Low-Temperature Release by Poly(aminoethyl methacrylate) and Derivatives

Poly(aminoethyl methacrylate) (PAEMA), poly(ethylene oxide)-block-(aminoethyl methacrylate) (PEO-PAEMA), and their guanidinylated derivates, poly(guanidine ethyl methacrylate) (PGEMA) and poly(ethylene oxide)-block-(guanidine ethyl methacrylate) (PEO-PGEMA), were prepared to study their capabilities for CO₂ adsorption and release. The polymers of different forms or degree of guanidinylation were thoroughly characterized, and their interaction with CO₂ was studied by NMR and calorimetry. The extent and kinetics of adsorption and desorption of N₂ and CO₂ were investigated by thermogravimetry under controlled gas atmospheres. The materials did not adsorb N₂, whereas CO₂ could be reversibly adsorbed at room temperature and released by an elevated temperature. The most promising polymer was PGEMA with a guanidinylation degree of 7% showing a CO₂ adsorption capacity of 2.4 mmol/g at room temperature and a desorption temperature of 72 °C. The study also revealed relations between the polymer chemical composition and CO₂ adsorption and release characteristics that are useful in future formulations for CO₂ adsorbent polymer materials.

Nonionic star polymers with upper critical solution temperature in aqueous solutions

Novel UCST star poly(2-ureido methacrylates) synthesized via the ARGET ATRP technique showed enhanced trapping abilities of model drug molecules.

Polymer-functionalization of carbon nanotube by in situ conventional and controlled radical polymerizations

Functionalization of carbon nanotube (CNT) with polymers has drawn much attention due to its wide range of applications. Polymer-functionalized CNT could exhibit variety of properties, such as responsivity to environmental stimuli, ability of complexation with metal ions, increased dispersibility in different solvents, higher compatibility with polymer matrix, etc. Chemical and physical methods have been developed for the preparation of polymer-functionalized CNT. Polymer chains are chemically bonded to the CNT edge or surface in the chemical methods, which results in highly stable CNT/polymer composites. "Grafting to", "grafting from", and "grafting through" methods are the most common chemical methods for polymer-functionalization of CNT. In "grafting to" method, pre-fabricated polymer chains are coupled with the either functionalized or non-functionalized CNT. In "grafting from" and "grafting through" methods, CNT is functionalized by polymers simultaneously synthesized by in situ polymerization methods. Conventional free radical polymerization (FRP) and also controlled radical polymerization (CRP) are the most promising methods for in situ tethering of polymer brushes onto the surface of CNT due to their control over the grafting density, thickness, and functionality of the polymer brushes. The main focus of this review is on the synthesis of polymer-functionalized CNT via both the "grafting from" and "grafting through" methods on the basis of FRP and CRP routs, which is commonly known as in situ polymerizations. Finally, the most important challenges and applications of the in situ polymer grafting methods are discussed, which could be interesting for the future works.

Cell-Penetrating, Peptide-Based RAFT Agent for Constructing Penetration Enhancers

Peptide-polymer conjugates represent a promising class of compounds that can be used to overcome some of the limitations associated with peptides intended for therapeutic and diagnostic applications. The efficient generation of well-defined peptide/protein-polymer conjugates can promote the development of the design and synthesis of functional drugs and gene delivery platforms. In this research, a sequence defined cell penetrating peptide (i.e., Transportan 10 (TP 10))-based chain transfer agent (TP-CTA) was designed and synthesized in an automated peptide synthesizer. Thereafter, amphiphilic block copolymers poly[oligo(ethylene glycol) methyl ether acrylate]-b-poly(n-butyl acrylate) (TP-POEGA-b-PBA) were synthesized using the TP-CTA via reversible addition-fragmentation chain transfer (RAFT) polymerization. Circular dichroism (CD) spectroscopy confirmed the preservation of α-helix structure of TP 10, which is crucial for its bioactivity. Transmission electron microscopy (TEM) revealed the formation of self-assembled rod-like and vesicle nanostructures in an aqueous environment. Finally, the obtained peptide-conjugated block copolymers were demonstrated to be effective compounds for cell penetration. This method opens up a way for accessing peptide-polymer conjugates with cell-penetrating abilities.

pH and singlet oxygen dual-responsive GEM prodrug micelles for efficient combination therapy of chemotherapy and photodynamic therapy

Nanocarriers have been an important strategy for enhancing the combination therapy of chemotherapy and photodynamic therapy (PDT) (Chem-PDT).

Dual-Responsive Doxorubicin-Conjugated Polymeric Micelles with Aggregation-Induced Emission Active Bioimaging and Charge Conversion for Cancer Therapy

In recent years, intelligent polymeric micelles with multifunctions are in urgent demand for cancer diagnosis and therapy. Herein, pH and redox dual-responsive prodrug micelles with aggregation-induced emission (AIE) active cellular imaging and charge conversion have been prepared for combined chemotherapy and bioimaging based on a novel doxorubicin-conjugated amphiphilic PMPC-PAEMA-P (TPE- co-HD)-ss-P (TPE- co-HD)-PAEMA-PMPC copolymer. The doxorubicin is conjugated via a pH cleavable imine linkage and can be packed in the hydrophobic core along with the glutathione (GSH)-sensitive disulfide bond. The DOX-conjugated inner core is sealed with a pH-responsive PAEMA as the "gate", which would rapidly open in the acidic condition, following the drug release and charge conversion-mediated acceleration of endocytosis. After an efficient internalization, the disulfide bond can be cleaved by the high concentration of GSH causing the further accelerated drug release. Meanwhile, intracellular drug delivery can be traced due to the AIE behavior of micelles. Moreover, great tumor inhibition in vitro and in vivo has been demonstrated for these DOX-conjugated micelles. This smart prodrug micelle system would be a desirable drug carrier for cancer therapy and bioimaging.

Synthesis of Multifunctional Homopolymers through Using Thiazolidine Chemistry and Post-Polymerization Modification

Multifunctional homopolymers, defined here as polymers that contain multiple reactive functional groups per repeat unit, are versatile scaffolds for preparing complex macromolecules via post-polymerization modification. However, there are limited methods for preparing multifunctional homopolymers that contain more than one nucleophilic site per repeat unit. Herein, a strategy to synthesize a multifunctional homopolymer using thiazolidine chemistry is demonstrated. Controlled radical polymerization of a thiazolidine-containing acrylamido monomer allows for the synthesis of a polymer with pendent latent nucleophiles. Ring-opening of the thiazolidine affords a homopolymer with two side-chain reactive sites, an amine and a thiol. One-pot functionalization via disulfide formation and acyl substitution is performed to introduce two distinct groups in each repeat unit.

Photolabile protecting groups: a strategy for making primary amine polymers by RAFT

Photolabile amine protecting groups are combined with RAFT polymerization to create well-defined amine containing polymers, which is typically a challenge for RAFT polymerization.

RAFT polymerization of a RGD peptide-based methacrylamide monomer for cell adhesion

The present study provides a robust method for the preparation of RGD peptide-based polymers that has important implications in the synthesized biomaterials that support cell adhesion.

RAFT/MADIX polymerization of N-vinylcaprolactam in water–ethanol solvent mixtures

The present paper demonstrates the successful RAFT/MADIX polymerization of N-vinylcaprolactam at ambient temperature in water–ethanol mixtures. An optimum was found for a 1 : 1 ratio of water and ethanol as solvent regarding both polymerization rate and insignificant hydrolysis.

RAFT polymerization to form stimuli-responsive polymers

Stimuli-responsive polymers respond to a variety of external stimuli, which include optical, electrical, thermal, mechanical, redox, pH, chemical, environmental and biological signals. This paper is concerned with the process of forming such polymers by RAFT polymerization.

Cationic and reactive primary amine-stabilised nanoparticles via RAFT aqueous dispersion polymerisation

Synthesis of cationic reactive primary amine-functionalized diblock copolymer nano-objects via polymerisation-induced self-assembly (PISA) using a RAFT aqueous dispersion polymerisation formulation is reported.

Temperature- and pH-Responsive Benzoboroxole-Based Polymers for Flocculation and Enhanced Dewatering of Fine Particle Suspensions

Random copolymers based on N-isopropylacrylamide (NIPAAm) containing 2-aminoethyl methacrylamide hydrochloride (AEMA) and 5-methacrylamido-1,2-benzoboroxole (MAAmBo) were synthesized and subsequently evaluated for their performance in solid-liquid separation at various pH and temperatures. The strong interactions between benzoboroxole residues and kaolin hydroxyl groups were evaluated for the first time in the flocculation of fine particle suspensions. The lower critical solution temperatures (LCSTs) of PAMN decreases because of the hydrophobic nature of the benzoboroxole moieties, resulting in strong hydrophobic interaction at temperatures higher than the LCSTs. Temperature and pH responsive polymer, P(AEMA51-st-MAAmBo76-st-NIPAM381) (denoted as PAMN) shows the ability to induce fastest settling at a low dosage of 25 ppm and under the condition of pH 9 and 50 °C. The accelerated settling rate is considered to be due to the strong adhesion of benzoboroxole residues to the kaolin hydroxyl groups, the electrical double layer force, and the hydrophobic force. During condensation phase, increasing the pH of sediment to pH 11 could attain the most compact structure. Random copolymers containing benzoboroxole groups act as dispersants (due to pH-responsive character) rather than flocculants at pH 11, providing repulsive force that enables particles to rearrange their position and consolidate well. Through a two-step solid-liquid separation including settling phase and consolidation phase, rapid settling and compact sediment are feasible simultaneously.

Direct Route to Well-Defined Poly(ionic liquid)s by Controlled Radical Polymerization in Water

The precision synthesis of poly(ionic liquid)s (PILs) in water is achieved for the first time by the cobalt-mediated radical polymerization (CMRP) of N-vinyl-3-alkylimidazolium-type monomers following two distinct protocols. The first involves the CMRP of various 1-vinyl-3-alkylimidazolium bromides conducted in water in the presence of an alkyl-cobalt(III) complex acting as a monocomponent initiator and mediating agent. Excellent control over molar mass and dispersity is achieved at 30 °C. Polymerizations are complete in a few hours, and PIL chain-end fidelity is demonstrated up to high monomer conversions. The second route uses the commercially available bis(acetylacetonato)cobalt(II) (Co(acac)₂) in conjunction with a simple hydroperoxide initiator (tert-butyl hydroperoxide) at 30, 40, and 50 °C in water, facilitating the scaling-up of the technology. Both routes prove robust and straightforward, opening new perspectives onto the tailored synthesis of PILs under mild experimental conditions in water.

Quantitative study on the antifreeze protein mimetic ice growth inhibition properties of poly(ampholytes) derived from vinyl-based polymers

Antifreeze (glyco) proteins (AF(G)Ps) from the blood of polar fish species are extremely potent ice recrystallization inhibitors (IRI), but are difficult to synthesise or extract from natural sources. Despite this challenge, materials which display IRI are appealing due to their ability to enhance cellular cryopreservation, for applications including regenerative and transplantation medicine. Here, poly(ampholytes), which contain a mixture of cationic and anionic side chains are quantitatively evaluated for their IRI activity. Poly(aminoethyl methacrylate), obtained by RAFT polymerization, is functionalised with succinic anhydride to generate the poly(ampholytes). The charge balance of the side chains is shown to be crucial, with only 50 : 50 mixtures having strong IRI activity, which also scales with molecular weight. This is the first example of a non-hydroxylated synthetic polymer with quantifiable IRI activity and raises questions about the mechanism of IRI, as the polymers have no obvious ice-binding motif. The ampholytic structure is shown to be transferable to carbohydrate-centred polymers with activity retained, but poly(betaines) are shown to be inactive.

Investigating the effects of block versus statistical glycopolycations containing primary and tertiary amines for plasmid DNA delivery

Polymer composition and morphology can affect the way polymers interact with biomolecules, cell membranes, and intracellular components. Herein, diblock, triblock, and statistical polymers that varied in charge center type (primary and/or tertiary amines) were synthesized to elucidate the role of polymer composition on plasmid DNA complexation, delivery, and cellular toxicity of the resultant polyplexes. The polymers were synthesized via RAFT polymerization and were composed of a carbohydrate moiety, 2-deoxy-2-methacrylamido glucopyranose (MAG), a primary amine group, N-(2-aminoethyl) methacrylamide (AEMA), and/or a tertiary amine moiety, N,N-(2-dimethylamino)ethyl methacrylamide (DMAEMA). The lengths of both the carbohydrate and cationic blocks were kept constant while the primary amine to tertiary amine ratio was varied within the polymers. The polymers were characterized via nuclear magnetic resonance (NMR) and size exclusion chromatography (SEC), and the polyplex formulations with pDNA were characterized in various media using dynamic light scattering (DLS). Polyplexes formed with the block copolymers were found to be more colloidally stable than statistical copolymers with similar composition, which rapidly aggregated to micrometer sized particles. Also, polymers composed of a higher primary amine content were more colloidally stable than polymers consisting of the tertiary amine charge centers. Plasmid DNA internalization, transgene expression, and toxicity were examined with each polymer. As the amount of tertiary amine in the triblock copolymers increased, both gene expression and toxicity were found to increase. Moreover, it was found that increasing the content of tertiary amines imparted higher membrane disruption/destabilization. While both block and statistical copolymers had high transfection efficiencies, some of the statistical systems exhibited both higher transfection and toxicity than the analogous block polymers, potentially due to the lack of a hydrophilic block to screen membrane interaction/disruption. Overall, the triblock terpolymers offer an attractive composition profile that exhibited interesting properties as pDNA delivery vehicles.

Controlled synthesis of amino acid-based pH-responsive chiral polymers and self-assembly of their block copolymers

Leucine/isoleucine side chain polymers are of interest due to their hydrophobicity and reported role in the formation of α-helical structures. The synthesis and reversible addition-fragmentation chain transfer (RAFT) polymerization of amino acid-based chiral monomers, namely Boc-L-leucine methacryloyloxyethyl ester (Boc-L-Leu-HEMA, 1a), Boc-L-leucine acryloyloxyethyl ester (Boc-L-Leu-HEA, 1b), Boc-L-isoleucine methacryloyloxyethyl ester (Boc-L-Ile-HEMA, 1c), and Boc-L-isoleucine acryloyloxyethyl ester (Boc-L-Ile-HEA, 1d), are reported. The controlled nature of the polymerization of the said chiral monomers in N, N-dimethylformamide (DMF) at 70 °C is evident from the formation of narrow polydisperse polymers, the molecular weight controlled by the monomer/chain transfer agent (CTA) molar ratio and the linear relationship between molecular weight and monomer conversion. The resulting well-defined polymers were used as macro-CTAs to prepare corresponding diblock copolymers by RAFT polymerization of methyl (meth)acrylate monomers. Deprotection of Boc groups in the homopolymers and block copolymers under acidic conditions produced cationic, pH-responsive polymers with primary amine moieties at the side chains. The optical activity of the homopolymers and block copolymers were studied using circular dichroism (CD) spectroscopy and specific rotation measurements. The self-assembling nature of the block copolymers to produce highly ordered structures was illustrated through dynamic light scattering (DLS) and atomic force microscopy (AFM) studies. The side chain amine functionality instills pH-responsive behavior, which makes these cationic polymers attractive candidates for drug delivery applications, as well as for conjugation of biomolecules.

Living Radical Polymerization by the RAFT Process – A Third Update

This paper provides a third update to the review of reversible deactivation radical polymerization (RDRP) achieved with thiocarbonylthio compounds (ZC(=S)SR) by a mechanism of reversible addition-fragmentation chain transfer (RAFT) that was published in June 2005 (Aust. J. Chem. 2005, 58, 379). The first update was published in November 2006 (Aust. J. Chem. 2006, 59, 669) and the second in December 2009 (Aust. J. Chem. 2009, 62, 1402). This review cites over 700 publications that appeared during the period mid 2009 to early 2012 covering various aspects of RAFT polymerization which include reagent synthesis and properties, kinetics and mechanism of polymerization, novel polymer syntheses, and a diverse range of applications. This period has witnessed further significant developments, particularly in the areas of novel RAFT agents, techniques for end-group transformation, the production of micro/nanoparticles and modified surfaces, and biopolymer conjugates both for therapeutic and diagnostic applications.

Tuning core vs. shell dimensions to adjust the performance of nanoscopic containers for the loading and release of doxorubicin

Detailed studies were performed to probe the effects of the core and shell dimensions of amphiphilic, shell crosslinked, knedel-like polymer nanoparticles (SCKs) on the loading and release of doxorubicin (DOX), a widely-used chemotherapy agent, in aqueous buffer, as a function of the solution pH. Effects of the nanoparticle composition were held constant, by employing SCKs constructed from a single type of amphiphilic diblock copolymer, poly(acrylic acid)-b-polystyrene (PAA-b-PS). A series of four SCK nanoparticle samples, ranging in number-average hydrodynamic diameter from 14-30 nm, was prepared from four block copolymers having different relative block lengths and absolute degrees of polymerization. The ratios of acrylic acid to styrene block lengths ranged from 0.65 to 3.0, giving SCKs with ratios of shell to core volumes ranging from 0.44 to 2.1. Although the shell thicknesses were calculated to be similar (1.5-3.1 nm by transmission electron microscopy (TEM) calculations and 3.5-4.9 nm by small angle neutron scattering (SANS) analyses), two of the SCK nanoparticles had relatively large core diameters (19±2 and 20±2 nm by TEM; 17.4 and 15.3 nm by SANS), while two had similar, smaller core diameters (11±2 and 13±2 nm by TEM; 9.0 and 8.9 nm by SANS). The SCKs were capable of being loaded with 1500-9700 DOX molecules per each particle, with larger numbers of DOX molecules packaged within the larger core SCKs. Their shell-to-core volume ratio showed impact on the rates and extents of release of DOX, with the volume occupied by the poly(acrylic acid) shell relative to the volume occupied by the polystyrene core correlating inversely with the diffusion-based release of DOX. Given that the same amount of polymer was used to construct each SCK sample, SCKs having smaller cores and higher acrylic acid vs. styrene volume ratios were present at higher concentrations than were the larger core SCKs, and gave lower final extents of release., Higher final extents of release and faster rates of release were observed for all DOX-loaded particle samples at pH 5.0 vs. pH 7.4, respectively, ca. 60% vs. 40% at 60 h, suggesting promise for enhanced delivery within tumors and cells. By fitting the data to the Higuchi model, quantitative determination of the kinetics of release was made, giving rate constants ranging from 0.0431 to 0.0540 h⁻¹/² at pH 7.4 and 0.106 to 0.136 h⁻¹/² at pH 5.0. In comparison, the non-crosslinked polymer micelle analogs exhibited rate constants for release of DOX of 0.245 and 0.278 h⁻¹/² at pH 7.4 and 5.0, respectively. These studies point to future directions to craft sophisticated devices for controlled drug release.

Evaluation of Isoprene Chain Extension from PEO Macromolecular Chain Transfer Agents for the Preparation of Dual, Invertible Block Copolymer Nanoassemblies

Two RAFT-capable PEO macro-CTAs, 2 and 5 kDa, were prepared and used for the polymerization of isoprene which yielded well-defined block copolymers of varied lengths and compositions. GPC analysis of the PEO macro-CTAs and block copolymers showed remaining unreacted PEO macro-CTA. Mathematical deconvolution of the GPC chromatograms allowed for the estimation of the blocking efficiency, about 50% for the 5 kDa PEO macro-CTA and 64% for the 2 kDa CTA. Self assembly of the block copolymers in both water and decane was investigated and the resulting regular and inverse assemblies, respectively, were analyzed with DLS, AFM, and TEM to ascertain their dimensions and properties. Assembly of PEO-b-PIp block copolymers in aqueous solution resulted in well-defined micelles of varying sizes while the assembly in hydrophobic, organic solvent resulted in the formation of different morphologies including large aggregates and well-defined cylindrical and spherical structures.