Synthesis and self-assembly behavior of amphiphilic polypeptide-based brush-coil block copolymers

Biomimetic mineralization of positively charged silica nanoparticles templated by thermoresponsive protein micelles: applications to electrostatic assembly of hierarchical and composite superstructures

High information content building blocks offer a path toward the construction of precision materials by supporting the organization and reconfiguration of organic and inorganic components through engineered functions. Here, we combine thermoresponsiveness with biomimetic mineralization by fusing the Car9 silica-binding dodecapeptide to the C-terminus of the (VPGVG)54 elastin-like polypeptide (ELP). Using small angle X-ray scattering, we show that the short Car9 cationic block is sufficient to promote the conversion of disordered unimers into 30 nm micelles comprising about 150 proteins, 5 °C above the transition temperature of the ELP. While both species catalyze self-limiting silica precipitation, micelles template the mineralization of highly monodisperse (62 nm) nanoparticles, while unimers yield larger polydisperse species. Strikingly, and unlike traditional synthetic silica, these particles exhibit a positive surface charge, likely due to cationic Car9 sidechains projecting from their surface. Capitalizing on the high monodispersity and positive charge of the micelle-templated products, we use smaller silica and gold particles bearing a native negative charge to create a variety of superstructures via electrostatic co-assembly. This simple biomimetic route to positively charged silica eliminates the need for multiple precursors or surface modifications and enables the rapid creation of single-material and composite architectures in which components of different sizes or compositions are well dispersed and integrated.

Recent advances in the self-assembly of sparsely grafted amphiphilic copolymers in aqueous solution

This review describes the self-assembly of sparsely grafted amphiphilic copolymers and highlights the effects of structural factors and solvents on their self-assembly behaviour.

Anchorage-Dependent Living Supramolecular Self-Assembly of Polymeric Micelles

Anchorage-dependent contact-inhibited growth usually refers to on-surface cell proliferation inhibited by the proximity of other cells. This phenomenon, prominent in nature, has yet to be achieved with polymeric micelles. Here, we report the control living supra-macromolecular self-assembly of elongated micelles with a liquid crystalline core onto a hydrophobic substrate via the synergetic interactions between the substrate and aggregates dispersed in solution. In this system, seed formation is a transient phenomenon induced by the adsorption and rearrangement of the core-swollen aggregates. The seeds then trigger the growth of elongated micelles onto the substrate in a living controllable manner until the contact with the substrate is disrupted. Brownian dynamic simulations show that this unique behavior is due to the fusion of the aggregates onto both ends of the anchored seeds. More important, the micelle length can be tuned by varying the substrate hydrophobicity, a key step toward the fabrication of intricate structures.

Dual-Emissive Platinum(II) Metallacage with a Sensitive Oxygen Response for Imaging of Hypoxia and Imaging-Guided Chemotherapy

Imaging of hypoxia in vivo helps with accurate cancer diagnosis and evaluation of therapeutic outcomes. A Pt^II metallacage with oxygen-responsive red phosphorescence and steady fluorescence for in vivo hypoxia imaging and chemotherapy is reported. The therapeutic agent and diagnostic probe were integrated into the metallacage through heteroligation-directed self-assembly. Nanoformulation by encapsulating the metallacage into nanoparticles greatly enhanced its stability the in physiological environment, rendering biomedical applications feasible. Apart from enhanced red phosphorescence upon hypoxia, the ratio between red and blue emissions, which only varies with intracellular oxygen level, provides a more precise standard for hypoxia imaging and detection. Moreover, in vivo explorations demonstrate the promising potential applications of the metallacage-loaded nanoparticles as theranostic agents for tumor hypoxia imaging and chemotherapy.

Amphiphilic Star Polypept(o)ides as Nanomeric Vectors in Mucosal Drug Delivery

Mucosal delivery across the gastrointestinal (GI) tract, airways, and buccal epithelia is an attractive mode of therapeutic administration, but the challenge is to overcome the mucus and epithelial barriers. Here, we present degradable star polypept(o)ides capable of permeating both barriers as a promising biomaterial platform for mucosal delivery. Star polypept(o)ides were obtained by the initiation of benzyl-l-glutamate N-carboxyanhydride (NCA) from an 8-arm poly(propyleneimine) (PPI) dendrimer, with subsequent chain extension with sarcosine NCA. The hydrophobic poly(benzyl-l-glutamate) (PBLG) block length was maintained at 20 monomers, while the length of the hydrophilic poly(sarcosine) (PSar) block ranged from 20-640 monomers to produce star polypept(o)ides with increasing hydrophilic: hydrophobic ratios. Transmission electron microscopy (TEM) images revealed elongated particles of ∼120 nm length, while dynamic light scattering (DLS) provided evidence of a decrease in the size of polymer aggregates in water with increasing poly(sarcosine) block length, with the smallest size obtained for the star PBLG₂₀-b-PSar₆₄₀. Fluorescein isothiocyanate (FITC)-conjugated PBLG₂₀-b-PSar₆₄₀ permeated artificial mucus and isolated rat mucus, as well as rat intestinal jejunal tissue mounted in Franz diffusion chambers. An apparent permeability coefficient (P_app) of 15.4 ± 3.1 ×10^-6 cm/s for FITC-PBLG₂₀-b-PSar₆₄₀ was calculated from the transepithelial flux obtained with the apical-side addition of 7.5 mg polypept(o)ide to jejunal tissue over 2 h. This P_app could not be accounted for by flux of unconjugated FITC. Resistance to trypsin demonstrated the stability of FITC-labeled polypept(o)ide over 2 h, but enzymatic degradation at the mucus-epithelial interface or during flux could not be ruled out as contributing to the P_app. The absence of any histological damage to the jejunal tissue during the 2 h exposure suggests that the flux was not associated with overt toxicity.

Experiments and Simulations of Complex Sugar-Based Coil-Brush Block Polymer Nanoassemblies in Aqueous Solution

In this work, we investigated the fundamental molecular parameters that guide the supramolecular assembly of glucose-based amphiphilic coil-brush block polymers in aqueous solution and elucidated architecture-morphology relationships through experimental and simulation tools. Well-defined coil-brush polymers were synthesized through ring-opening polymerizations (ROP) of glucose carbonates to afford norbornenyl-functionalized poly(glucose carbonate) (NB-PGC) macromonomers, followed by sequential ring-opening metathesis polymerizations (ROMP) of norbornene N-hydroxysuccinimidyl (NHS) esters and the NB-PGC macromonomers. Variation of the macromonomer length and grafting through ROMP conditions allowed for a series of coil-brush polymers to be synthesized with differences in the brush and coil dimensions, independently, where the side chain graft length and brush backbone were used to tune the brush, and the coil block length was used to vary the coil. Hydrolysis of the NHS moieties gave the amphiphilic coil-brush polymers, where the hydrophilic-hydrophobic ratios were dependent on the brush and coil relative dimensions. Experimental assembly in solution was studied and found to yield a variety of structurally dependent nanostructures. Simulations were conducted on the solution assembly of coil-brush polymers, where the polymers were represented by a coarse-grained model and the solvent was represented implicitly. There is qualitative agreement in the phase diagrams obtained from simulations and experiments, in terms of the morphologies of the assembled nanoscopic structures achieved as a function of coil-brush design parameters ( e.g., brush and coil lengths, composition). The simulations further showed the chain conformations adopted by the coil-brush polymers and the packing within these assembled nanoscopic structures. This work enables the predictive design of nanostructures from this glucose-based coil-brush polymer platform while providing a fundamental understanding of interactions within solution assembly of complex polymer building blocks.

Anisotropic polymer nanoparticles with solvent and temperature dependent shape and size from triblock copolymers

By the combination of RAFT and N-carboxyanhydride (NCA) polymerisation triblock copolymers were designed able to form responsive spherical and non-spherical particles.

Polypeptide self-assemblies: nanostructures and bioapplications

Polypeptide copolymers can self-assemble into diverse aggregates. The morphology and structure of aggregates can be varied by changing molecular architectures, self-assembling conditions, and introducing secondary components such as polymers and nanoparticles. Polypeptide self-assemblies have gained significant attention because of their potential applications as delivery vehicles for therapeutic payloads and as additives in the biomimetic mineralization of inorganics. This review article provides an overview of recent advances in nanostructures and bioapplications related to polypeptide self-assemblies. We highlight recent contributions to developing strategies for the construction of polypeptide assemblies with increasing complexity and novel functionality that are suitable for bioapplications. The relationship between the structure and properties of the polypeptide aggregates is emphasized. Finally, we briefly outline our perspectives and discuss the challenges in the field.

Well-defined degradable brush-coil block copolymers for intelligent release of insulin at physiological pH

To achieve an intelligent insulin delivery system with minimal long-term side effect, a kind of brush polymer was synthesized through poly[(2-phenylborate esters-1,3-dioxane-5-ethyl)methylacrylate] grafting from the backbone poly(ε-caprolactone).

Brush macromolecules with thermo-sensitive coil backbones and pendant polypeptide side chains: synthesis, self-assembly and functionalization

Macromolecular brushes with thermo-sensitive coil backbones and pendant poly(γ-benzyl-l-glutamate) side chains were synthesized by reversible addition–fragmentation chain transfer and ring-opening polymerization. Functionalization and self-assembly of the macromolecules were investigated.

Impact of hydrophobic chain composition on amphiphilic macromolecule antiatherogenic bioactivity

Amphiphilic macromolecules (AMs) composed of sugar backbones modified with branched aliphatic chains and a poly(ethylene glycol) (PEG) tail can inhibit macrophage uptake of oxidized low-density lipoproteins (oxLDL), a major event underlying atherosclerosis development. Previous studies indicate that AM hydrophobic domains influence this bioactivity through interacting with macrophage scavenger receptors, which can contain basic and/or hydrophobic residues within their binding pockets. In this study, we compare two classes of AMs to investigate their ability to promote athero-protective potency via hydrogen-bonding or hydrophobic interactions with scavenger receptors. A series of ether-AMs, containing methoxy-terminated aliphatic arms capable of hydrogen-bonding, was synthesized. Compared to analogous AMs containing no ether moieties (alkyl-AMs), ether-AMs showed improved cytotoxicity profiles. Increasing AM hydrophobicity via incorporation of longer and/or alkyl-terminated hydrophobic chains yielded macromolecules with enhanced oxLDL uptake inhibition. These findings indicate that hydrophobic interactions and the length of AM aliphatic arms more significantly influence AM bioactivity than hydrogen-bonding.

Toroid formation through self-assembly of graft copolymer and homopolymer mixtures: experimental studies and dissipative particle dynamics simulations

Self-assembly of mixture systems containing poly(acrylic acid)-g-poly(γ-benzyl-L-glutamate) graft copolymers (PAA-g-PBLG) and PBLG homopolymers in aqueous solution was investigated by both experiments and computer simulations. It was found that the aggregate morphologies, such as rods, curved rods, and toroids, could be tuned by the homopolymer content. The toroidal micelles with uniform size were formed when the homopolymer content in the hybrid aggregates is higher. The effect of added water content on the toroid formation process was studied. Rods and curved rods were observed sequentially before formation of toroids. We also performed dissipative particle dynamics (DPD) simulations to verify the structure transition and explore the formation mechanism of the toroidal aggregates. The DPD results are in good agreement with the experimental findings and provide additional information such as chain distribution in aggregates, which is difficult to be gained through experiments. On the basis of the experimental and simulation results, the formation mechanism of the toroidal micelles was suggested.

Biohybrid block copolymers: towards functional micelles and vesicles

This critical review covers the elaboration of micelles and vesicles made from block copolymers containing peptide or oligonucleotide blocks with a focus on recent developments toward responsive and functional assemblies (166 references).