Effective Epoxidation of Fatty Acid Methyl Esters with Hydrogen Peroxide by the Catalytic System H3PW12O40/Quaternary Phosphonium Salts

Six quaternary phosphonium salts (QPSs) in combination with phosphotungstic heteropolyacid, H3PW12O40, were tested in the epoxidation of rapeseed oil fatty acid methyl esters with a hydrogen peroxide aqueous solution. The QPSs consisted of trihexyl(tetradecyl)phosphonium [P6], tributyl-tetradecylphosphonium [P4] or tetraoctylphosphonium [P8] cation and different anions—chloride (Cl−), bromide (Br−), tetrafluoroborate (BF4−), bis(trifluoromethylsulfonyl)amide (NTf2−), bis(2,4,4-trimethyl-pentyl)phosphinate (Phosf−). The influence of the kind of QPS and temperature on the epoxy number, iodine number, glycol content has been determined. The epoxidation was confirmed using Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR) and elemental analysis CHO. Two QPSs with a trihexyltetradecyphosphonium cation—[P6][Fosf] and [P6][Cl]—were selected as the most effective in the studied epoxidation process. The proposed kinetic model takes into consideration the two reactions, namely, epoxidation and epoxy ring opening involving the formation of hydroxyl groups. The rate constants and activation energies for epoxidation fatty acid methyl esters were determined.

Effect of Evening Primrose Oil-Based Polyol on the Properties of Rigid Polyurethane⁻Polyisocyanurate Foams for Thermal Insulation

The article presents the results of research on the synthesis of a new biopolyol based on evening primrose oil, and its use in the production of rigid polyurethane⁻polyisocyanurate foams intended for thermal insulation. The obtained biopolyol was subjected to analytical, physicochemical, and spectroscopic tests (Fourier transform infrared (FTIR), ¹H NMR, 13C NMR) to confirm its suitability for the synthesis of polyurethane materials. Then, it was used for the partial replacement of the petrochemical polyol in the polyurethane formulation. Obtained rigid polyurethane⁻polyisocyanurate foams are characterized by a lower apparent density, brittleness, water absorption, and thermal conductivity coefficient λ. In addition, foams modified by biopolyols had a higher content of closed cells and higher aging resistance. The results of the conducted research showed that the use of the biopolyol based on evening primrose oil may be an alternative to petrochemical polyols. The research presented herein is perfectly consistent with the trends of sustainable development and the philosophy of green chemistry.

Bio-Based Polymers for 3D Printing of Bioscaffolds

Three-dimensional (3D) printing technologies enable not only faster bioconstructs development but also on-demand and customized manufacturing, offering patients a personalized biomedical solution. This emerging technique has a great potential for fabricating bioscaffolds with complex architectures and geometries and specifically tailored for use in regenerative medicine. The next major innovation in this area will be the development of biocompatible and histiogenic 3D printing materials with bio-based printable polymers. This review will briefly discuss 3D printing techniques and their current limitations, with a focus on novel bio-based polymers as 3D printing feedstock for clinical medicine and tissue regeneration.

Microbial Conversion of Vegetable Oil to Hydroxy Fatty Acid and Its Application to Bio-Based Polyurethane Synthesis

New polyurethanes were synthesized based on dihydroxy fatty acid obtained by the microbial conversion of olive oil. Monounsaturated 7,10-dihydroxy-8(E)-octadecenoic acid (DOD) was produced from olive oil by Pseudomonas aeruginosa PR3 and reacted with hexamethylene diisocyanate (HMDI) at different ratios to form polyurethanes. Fourier transform infrared spectroscopy and gas chromatography/mass spectrometry confirmed the synthesis of DOD. The thermal and tensile properties of the polyurethanes were investigated by differential scanning calorimetry, thermogravimetric analysis, and a universal testing machine. At an isocyanate/hydroxyl ratio of 1.4, the polyurethane exhibited an elongation at break of 59.2% and a high tensile strength of 37.9 MPa. DOD was also mixed with polycaprolactone diol or polyethylene glycol at different weight ratios and then reacted with HMDI to produce new polyurethanes of various properties. These polyurethanes displayed higher elongation at break and good thermal stability. This is the first report on the synthesis of polyurethanes based on DOD produced by the microbial conversion of vegetable oil.

4D printing of polymeric materials for tissue and organ regeneration

Four dimensional (4D) printing is an emerging technology with great capacity for fabricating complex, stimuli-responsive 3D structures, providing great potential for tissue and organ engineering applications. Although the 4D concept was first highlighted in 2013, extensive research has rapidly developed, along with more-in-depth understanding and assertions regarding the definition of 4D. In this review, we begin by establishing the criteria of 4D printing, followed by an extensive summary of state-of-the-art technological advances in the field. Both transformation-preprogrammed 4D printing and 4D printing of shape memory polymers are intensively surveyed. Afterwards we will explore and discuss the applications of 4D printing in tissue and organ regeneration, such as developing synthetic tissues and implantable scaffolds, as well as future perspectives and conclusions.

Vegetable-oil-based polymers as future polymeric biomaterials

Vegetable oils are one of the most important classes of bio-resources for producing polymeric materials. The main components of vegetable oils are triglycerides - esters of glycerol with three fatty acids. Several highly reactive sites including double bonds, allylic positions and the ester groups are present in triglycerides from which a great variety of polymers with different structures and functionalities can be prepared. Vegetable-oil-based polyurethane, polyester, polyether and polyolefin are the four most important classes of polymers, many of which have excellent biocompatibilities and unique properties including shape memory. In view of these characteristics, vegetable-oil-based polymers play an important role in biomaterials and have attracted increasing attention from the polymer community. Here we comprehensively review recent developments in the preparation of vegetable-oil-based polyurethane, polyester, polyether and polyolefin, all of which have potential applications as biomaterials.

Recent advances in vegetable oil-based polyurethanes

Polyurethanes are among the most versatile polymers because of the wide range of monomers, particularly diols or polyols, that can be utilized in their synthesis. This Review focuses on the most recent advances made in the production of polyurethane materials from vegetable oils. Over the past several years, increasing attention has been given to the use of vegetable oils as feedstocks for polymeric materials, because they tend to be very inexpensive and available in large quantities. Using various procedures, a very broad range of polyols or diols and in some cases, poly- or diisocyanates, can be obtained from vegetable oils. The wide range of vegetable oil-based monomers leads to a wide variety of polyurethane materials, from flexible foams to ductile and rigid plastics. The thermal and mechanical properties of these vegetable oil-based polyurethanes are often comparable to or even better than those prepared from petroleum and are suitable for applications in various industries.