Thermoresponsive graphene oxide-PNIPAM nanocomposites with controllable grafting polymer chains via moderate in situ SET-LRP

Countercation Engineering of Graphene-Oxide Nanosheets for Imparting a Thermoresponsive Ability

Graphene-oxide (GO) nanosheets, which are oxidized derivatives of graphene, are regarded as promising building blocks for functional soft materials. Especially, thermoresponsive GO nanosheets have been widely employed to develop smart membranes/surfaces, hydrogel actuators, recyclable systems, and biomedical applications. However, current synthetic strategies to generate such thermoresponsive GO nanosheets have exclusively relied on the covalent or non-covalent modification of their surfaces with thermoresponsive polymers, such as poly(N-isopropylacrylamide). To impart a thermoresponsive ability to GO nanosheets themselves, we focused on the countercations of the carboxy and acidic hydroxy groups on the GO nanosheets. In this study, we established a general and reliable method to synthesize GO nanosheets with target countercations and systematically investigated their effects on thermoresponsive behaviors of GO nanosheets. As a result, we discovered that GO nanosheets with Bu4N+ countercations became thermoresponsive in water without the use of any thermoresponsive polymers, inducing a reversible sol-gel transition via their self-assembly and disassembly processes. Owing to the sol-gel transition capability, the resultant dispersion can be used as a direct writing ink for constructing a three-dimensionally designable gel architecture of the GO nanosheets. Our concept of "countercation engineering" can become a new strategy for imparting a stimuli-responsive ability to various charged nanomaterials for the development of next-generation smart materials.

Supramolecular temperature responsive assembly of polydopamine reduced graphene oxide

Graphene oxide (GO) and reduced graphene oxide (rGO) colloidal systems can directly respond to environmental stimuli such as pH, ionic strength, and light by themselves, but not to temperature. Here we show that surface modification of rGO with polydopamine (PDA) leads to a temperature-responsive composite material, even though neither rGO nor PDA have intrinsic temperature responsiveness. Reducing GO with dopamine results in rGO/PDA flakes with hydrophilic PDA clusters attached to hydrophobic rGO domains, which mimics the amphiphilic structure of temperature responsive poly(N-isopropylacrylamide) (PNIPAM). The rGO/PDA flakes self-assemble at temperature higher than 30 °C, causing flake aggregation and precipitation in suspensions with concentration of 0.05 g L^-1, which is reversible upon cooling, shaking, and re-heating. A solution-to-gelation transition occurs upon heating suspensions with concentration of 10 g L^-1. Nacre-like films and porous monoliths are obtained by drying rGO/PDA suspensions at different concentrations. Films and porous monoliths obtained by drying suspensions that are previously self-assembled through heat have more compact structures compared to those obtained with suspensions that are not heated. Overall, this work introduces the concept of supramolecular temperature responsive assembly of nanomaterials (STRAN), i.e., that temperature response can be introduced in nanomaterials by combining non-responsive components that function cooperatively in supramolecules, whose interactions with solvents can be modulated by temperature changes, mimicking what happens in macromolecular systems such as PNIPAM. STRAN could be applied to nanomaterials beyond GO to develop responsive systems whose self-assembly in suspension and architectural features realized upon drying can be controlled by temperature.

Rheology and microstructure of thermoresponsive composite gels of hematite pseudocubes and Pluronic F127

Stimuli-responsive materials or smart materials are designed materials whose properties can be changed significantly by applying external stimuli, such as stress, electric or magnetic fields, light, temperature, and pH. We report the linear and nonlinear rheological properties of thermoresponsive composite gels based on submicron-sized hematite pseudocube-shaped particles and a triblock copolymer Pluronic F127 (PF127). These novel composites form hard gels at an elevated temperature of 37 °C. For certain concentrations (<20 w/v. %) of hematite pseudocubes in 17.5 w/v. % of PF127, the gel strength is enhanced and the brittleness of the gels decreases. Higher concentrations (>20 w/v. %) of hematite pseudocubes in PF127 result in weaker and fragile gels. We develop an extensive rheological fingerprint using linear and nonlinear rheological studies. Adsorption of PF127 copolymer molecules on the hematite cube surfaces would further assist the formation of particle clusters along with magnetic interactions to be held effectively in the PF127 micellar network at elevated temperatures. The microscopic structure of these composite gels is visualized through a confocal microscope. Our experiments show that addition of hematite cubes up to 20 w/v. % does not change the rapid thermal gelation of PF127 solutions; hence, the hematite-PF127 composite, which transforms into a hard gel near human body temperature of 37 °C, could be suitable for use in smart drug delivery systems.

Facile preparation of poly(N-isopropylacrylamide)/graphene oxide nanocomposites for chemo-photothermal therapy

Carbon-based nanomaterials, such as carbon nanotubes, fullerenes, nanodiamonds, and graphene, have been investigated for various biomedical applications, including biological imaging, photothermal therapy, drug/gene delivery, cancer therapy, biosensors, and electrochemical sensors. Graphene oxide (GO) has unique physicochemical properties and can be used to restore conductivity through oxidation. In this study, we developed poly(N-isopropylacrylamide) (PNIPAM)-based nanogel systems containing GO for controlled in vitro drug delivery. The photothermal effects of the PNIPAM/GO- and PNIPAMAAM/GO-based nanogel systems were enhanced. The release of DOX from the PNIPAM/GO-based nanogel was achieved using the photothermal effect of near-infrared irradiation. Using a Cell Counting Kit-8 assay, the cytotoxicity of all conditions demonstrated that the PNIPAM composite-based nanogels were biocompatible with no significance.

Cationic polymer-grafted graphene oxide/CNT cathode-coating material for lithium-sulfur batteries

A cathode-coating material composed of cationic polymer-grafted graphene oxide (CPGO) and carbon nanotube (CNT) was prepared, where the CPGO was synthesized by grafting quaternized 2-(dimethylamino)ethyl methacrylate (QDMAEMA) onto graphene oxide (GO) via atom transfer radical polymerization (ATRP). GO has good compatibility with carbon black, the main component of the cathode in lithium–sulfur (Li–S) batteries. Here, the cationic polymer having the QDMAEMA unit was intentionally grafted onto GO to decrease the shuttle effect by increasing the chemical adsorption of polysulfide (PS). In addition, when CNT was mixed with CPGO, the compatibility with carbon black was found to be further increased. The lithium–sulfur (Li–S) battery with a sulfur-deposited Super P® carbon black (S/C) cathode coated with a mixture of CPGO and CNT was found to have much improved cell performance compared to those coated without any coating material, with only CPGO, with the mixture of GO and CNT, and with the mixture of PQDMAEMA and CNT. For example, the Li–S battery with the cathode coated using the mixture of CPGO and CNT retained a discharge capacity of 744 mA h g⁻¹ after 50 cycles at 0.2C-rate, while those of the Li–S batteries with bare S/C and CPGO-S/C cathodes were found to be much smaller, i.e., 488 mA h g⁻¹ and 641 mA h g⁻¹, respectively, under the same conditions. Therefore, the mixture of CPGO with CNT as the cathode-coating material showed a synergetic effect to enhance the cell performance of the Li–S battery system.

A cathode-coating material composed of cationic polymer-grafted graphene oxide (CPGO) and carbon nanotube (CNT) was prepared and used as a cathode-coating material for lithium sulfur batteries.

In situ reduced graphene-based aerogels embedded with gold nanoparticles for real-time humidity sensing and toxic dyes elimination

Hybrid aerogels are promising candidates for energy storage, biosensing, and medical applications, but the conventional fabrication methods, being time-consuming and complex, limit their widespread utilization. The critical issues affecting their functionality include the un-controllable particle dispersity, loading of active materials, and the porosity. We report a simple and efficient method to synthesize in situ reduced Au nanoparticles@graphene (Au@graphene) hybrid aerogel using near-infrared radiation (NIR), resulting the uniform loading of well-dispersed Au nanoparticles (Au-NPs) as well as in situ reduction of graphene oxide (GO) with enhanced conductivity. The concentration of iso-propylacrylamide and GO can be adjusted to control the aerogel pore size during the freeze-drying process. Reduction of HAuCl₄ and GO to high extent under NIR light was confirmed with advanced characterization techniques. Density functional theory based calculations with generalized gradient-corrected functional (GGA/PW91) in the hybrid aerogel system, and dnd basis sets are used for the confirmation of possible interactions between the GO, Au-NPs, and the polymer. The as-designed highly porous and conductive aerogel shows an excellent humidity response (30-97%) and successfully removes the methylene blue pollutant from the aqueous solution to a high extent (90%). Therefore, Au@graphene hybrid aerogel is potentially an exciting candidate for a wide range of applications in the humidity sensing and biomedical disease detection.

Polymer grafting on graphene layers by controlled radical polymerization

In situ controlled radical polymerization (CRP) is considered as an important approach to graft polymer brushes with controlled grafting density, functionality, and thickness on graphene layers. Polymers are tethered with chain end or through its backbone to the surface or edge of graphene layers with two in situ polymerization methods of "grafting from" and "grafting through" and also a method based on coupling reactions known as "grafting to". The "grafting from" method relies on the propagation of polymer chains from the surface- or edge-attached initiators. The "grafting through" method is based on incorporation of double bond-modified graphene layers into polymer chains through the propagation reaction. The "grafting to" technique involves attachment of pre-fabricated polymer chains to the graphene substrate. Here, physical and chemical attachment approaches are also considered in polymer-modification of graphene layers. Combination of CRP mechanisms of reversible activation, degenerative (exchange) chain transfer, atom transfer, and reversible chain transfer with various kinds of grafting reactions makes it possible to selectively functionalize graphene layers. The main aim of this review is assessment of the recent advances in the field of preparation of polymer-grafted graphene substrates with well-defined polymers of controlled molecular weight, thickness, and polydispersity index. Study of the opportunities and challenges for the future works in controlling of grafting density, site-selectivity in grafting, and various topologies of the brushes with potential applications in stimuli-responsive surfaces, polymer composites, Pickering emulsions, coating technologies, and sensors is also considered.

Graphene Oxide/Ferrocene-Containing Polymer/Gold Nanoparticle Triple Nanocomposite

A facile strategy to prepare GO-based nanocomposites with both gold nanoparticles (AuNPs) and ferrocene (Fc) moieties was developed. The surface of GO was modified with PFcMAss homopolymer by surface-initiated atom transfer radical polymerization of a new methacrylate monomer of 2-((2-(methacryloyloxy)ethyl)disulfanyl)ethyl ferrocene-carboxylate (FcMAss), consisting of disulfide as an anchoring group for stabilizing AuNPs and Fc group as an additional functionality. AuNPs with an average diameter of about 4.1 nm were formed in situ on the surface of PFcMAss-decorated GO (GO-PFcMAss) via Brust-Schiffrin method to give GO-PFcMAss-AuNPs multifunctional nanocomposites bearing GO, AuNPs and Fc groups. The obtained nanocomposites were characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), transmission electron microscopy (TEM) and atomic force microscopy (AFM). Since disulfide-containing polymers, rather than the commonly used thiol-containing compounds, were employed as ligands to stabilize AuNPs, much more stabilizing groups were attached onto the surface of GO, and thus more AuNPs were able to be introduced onto the surface of GO. Besides, polymeric chains on the surface of GO endowed GO-PFcMAss-AuNPs nanocomposites with excellent colloidal stability, and the usage of a disulfide group provides possibility to efficiently incorporate additional functionalities by easily modifying structure of disulfide-based monomer.

Thermo-Responsive Graphene Oxide/Poly(Ethyl Ethylene Phosphate) Nanocomposite via Ring Opening Polymerization

An efficient strategy for growing thermo-sensitive polymers from the surface of exfoliated graphene oxide (GO) is reported in this article. GO sheets with hydroxyls and epoxy groups on the surface were first prepared by modified Hummer's method. Epoxy groups on GO sheets can be easily modified through ring-opening reactions, involving nucleophilic attack by tris(hydroxymethyl) aminomethane (TRIS). The resulting GO-TRIS sheets became a more versatile precursor for next ring opening polymerization (ROP) of ethyl ethylene phosphate (EEP), leading to GO-TRIS/poly(ethyl ethylene phosphate) (GO-TRIS-PEEP) nanocomposite. The nanocomposite was characterized by ¹H NMR, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), differential thermal gravity (DTG), transmission electron microscopy (TEM) and atomic force microscopy (AFM). Since hydrophilic PEEP chains make the composite separate into single layers through hydrogen bonding interaction, the dispersity of the functionalized GO sheets in water is significantly improved. Meanwhile, the aqueous dispersion of GO-TRIS-PEEP nanocomposite shows reversible temperature switching self-assembly and disassembly behavior. Such a smart graphene oxide-based hybrid material is promising for applications in the biomedical field.

Sequential and one-pot post-polymerization modification reactions of thiolactone-containing polymer brushes

Thiolactone chemistry has garnered significant attention as a powerful post-polymerization modification (PPM) route to mutlifunctional polymeric materials. Here, we apply this versatile chemistry to the fabrication of ultrathin, multifunctional polymer surfaces via aminolysis and thiol-mediated double modifications of thiolactone-containing polymer brushes. Polymer brush surfaces were synthesized via microwave-assisted surface-initiated polymerization of DL-homocysteine thiolactone acrylamide. Aminolysis and thiol-Michael double modifications of the thiolactone-functional brush were explored using both sequential and one-pot reactions with bromobenzyl amine and 1H,1H-perfluoro-N-decyl acrylate. X-ray photoelectron spectroscopy and argon gas cluster ion sputter depth profiling enabled quantitative comparison of the sequential and one-pot PPM routes with regard to conversion and spatial distribution of functional groups immobilized throughout thickness of the brush. While one-pot conditions proved to be more effective in immobilizing the amine and acrylate within the brush, the sequenital reaction enabled the fabrication of multifunctional, micropattterned brush surfaces using reactive microcontact printing.

Synthesis of a novel graphene-based gold nanocomposite using PVEIM-b-PNIPAM as a stabilizer and its thermosensitivity for the catalytic reduction of 4-nitrophenol

Fabrication of a graphene-based gold nanocomposite using PVEIM-b-PNIPAM as a stabilizer and its thermosensitivity for the reduction of 4-nitrophenol.

Atomistic insights into the adsorption and stimuli-responsive behavior of poly(N-isopropylacrylamide)-graphene hybrid systems

Non-covalent functionalization of graphene materials with responsive polymers is a promising approach for synthesizing new, hybrid composites with improved dispersibility and functional properties. However, the interplay between various components of the hybrid systems, their structural configurations, and stimuli-responsive behavior are not yet well understood at the atomic level. Here, we investigate the temperature-responsive behavior of physisorbed poly(N-isopropylacrylamide) (PNIPAM) on to graphene (G) and graphene oxide (GO) sheets in aqueous solution using large scale molecular dynamics simulations. It was observed that PNIPAM can be spontaneously anchored to the surfaces of both G and GO at 290 K with a macromolecular coil shape. However, the configuration of PNIPAM on G is markedly different in comparison with that on GO, leading to its distinct thermoresponsive behavior. Specifically, the adsorption on G gives rise to an increase in the temperature of the coil-to-globule transition when compared to the native polymer, the origin of which can be interpreted in terms of the interactions and the solvation behavior. The results obtained here are of significance to the design and manipulation of graphene-based stimuli-responsive hybrid systems with optimal functional properties.

Polymer Brushes: Efficient Synthesis and Applications

Polymer brushes are special macromolecular structures with polymer chains densely tethered to another polymer chain (one-dimensional, 1D) or the surface of a planar (two-dimensional, 2D), spherical or cylindrical (three-dimensional, 3D) solid via a stable covalent or noncovalent bond linkage. In comparison with the corresponding linear counterpart with similar molecular composition, one-dimension polymer brushes have some fascinating properties including wormlike conformation, compact molecular dimension, and notable chain end effects due to their compact and confined densely grafted structure. The introduction of polymer chains onto the surface of planar and spherical or cylindrical matrix will not only significantly change the surface-related properties of the matrix but also endows the obtained hybrid polymer brushes with new functionalities. Thus, polymer brushes are of great interest in the fields of polymer and material science due to their broad applications, such as catalysis, nanolithography, biomineralization, drug delivery, medical diagnosis, optoelectronics, and so on. Although a variety of 1D, 2D, and 3D polymer brushes have been prepared with the advent of living/controlled polymerization, the development of more efficient and facile synthetic protocols that permit access to polymer brushes with precisely controlled composition, structure, and functionality still represents a key contemporary challenge. In this Account, we summarize our recent efforts on the development of efficient methods to prepare 1D, 2D, and 3D polymer brushes and exploration of their potential applications in drug delivery, antifouling coating, catalysis, and lithium-ion batteries and also highlight related achievements by other groups. First, we briefly introduce the precedent examples of efficient synthesis of polymer brushes with different structures and functionalities by the combination of monomer design with living/controlled polymerization. Given the excellent tolerance and use of the same catalytic system without any mutual interference of ATRP and Cu-catalyzed alkyne-azide cyclization (CuAAC) click reaction, a versatile and efficient platform for precise synthesis of complex asymmetric (Janus-type) 1D polymer brushes was developed on the basis of the "trifunctional monomer" strategy without polymeric functionality transformation. Subsequently, a noncovalent strategy based on crystallization-driven self assembly to prepare well-defined polymer brushes with precise control over their composition and dimensions is described. Notably, the crystallization-driven self assembly can be treated as a living/controlled polymerization of "polymeric monomer" with a special building segment for crystallization, which allows for preparing linear polymer brushes with length as high as tens of micrometers. Moreover, the properties and related applications of polymer brushes as interesting building blocks for constructing hierarchical nanostructures, efficient drug deliver carriers, antifouling films, and lithium-ion batteries are addressed by some typical examples. These advancements in this field will provide a new avenue for obtaining fascinating polymer-brush-based functional materials.

Recent Developments in the Synthesis of Biomacromolecules and their Conjugates by Single Electron Transfer-Living Radical Polymerization

Single electron transfer-living radical polymerization (SET-LRP) represents a robust and versatile tool for the synthesis of vinyl polymers with well-defined topology and chain end functionality. The crucial step in SET-LRP is the disproportionation of the Cu(I)X generated by activation with Cu(0) wire, powder, or nascent Cu(0) generated in situ into nascent, extremely reactive Cu(0) atoms and nanoparticles and Cu(II)X₂. Nascent Cu(0) activates the initiator and dormant chains via a homogeneous or heterogeneous outer-sphere single-electron transfer mechanism (SET-LRP). SET-LRP provides an ultrafast polymerization of a plethora of monomers (e.g., (meth)-acrylates, (meth)-acrylamides, styrene, and vinyl chloride) including hydrophobic and water insoluble to hydrophilic and water soluble. Some advantageous features of SET-LRP are (i) the use of Cu(0) wire or powder as readily available catalysts under mild reaction conditions, (ii) their excellent control over molecular weight evolution and distribution as well as polymer chain ends, (iii) their high functional group tolerance allowing the polymerization of commercial-grade monomers, and (iv) the limited purification required for the resulting polymers. In this Perspective, we highlight the recent advancements of SET-LRP in the synthesis of biomacromolecules and of their conjugates.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Change in the Affinity of Ethylene Glycol Methacrylate Phosphate Monomer and Its Polymer Anchored on a Graphene Oxide Platform toward Uranium(VI) and Plutonium(IV) Ions

The complexation behavior of the carbonyl and phosphoryl ligating groups bearing ethylene glycol methacrylate phosphate (EGMP) monomer and its polymer fixed on a graphene oxide (GO) platform was studied to understand the coordination ability of segregated EGMP units and polymer chains toward UO2(2+) and Pu(4+) ions. The cross-linked poly(EGMP) gel and EGMP dissolved in solution have a similar affinity toward these ions. UV-initiator induced polymerization was used to graft poly(EGMP) on the GO platform utilizing a double bond of EGMP covalently fixed on it. X-ray photoelectron spectroscopy (XPS) of the GO and GO-EGMP was done to confirm covalent attachment of the EGMP via a -C-O-P- link between GO and EGMP. The extent of poly(EGMP) grafting on GO by thermal analyses was found to be 5.88 wt %. The EGMP units fixed on the graphene oxide platform exhibited a remarkable selectivity toward Pu(4+) ions at high HNO3 conc. where coordination is a dominant mode involved in the sorption of ions. The ratio of distribution coefficients of Pu(IV) to U(VI) (DPu(IV)/DU(VI)) followed a trend as cross-linked poly(EGMP) (0.95) < EGMP in solvent methyl isobutyl ketone (1.3) < GO-poly(EGMP) (25) < GO-EGMP (181); the DPu(IV)/DU(VI) values are given in parentheses. The density functional theory computations have been performed for the complexation of UO2(2+) and Pu(4+) ions with the EGMP molecule anchored on GO in the presence of nitrate ions. This computational modeling suggested that Pu(4+) ion formed a strong coordination complex with phosphoryl and carbonyl ligating groups of the GO-EGMP as compared to UO2(2+) ions. Thus, the nonselective EGMP becomes highly selective to Pu(IV) ions when it interacts as a single unit fixed on a GO platform.

Cu(0)-mediated living radical polymerization: recent highlights and applications; a perspective

Cu(0)-mediated living radical polymerization or single electron transfer living radical polymerization (Cu(0)-mediated LRP or SET-LRP) is a versatile polymerization technique that has attracted considerable interest during the past few years for the facile preparation of advanced materials.

Multiple-stimuli responsive bioelectrocatalysis based on reduced graphene oxide/poly(N-isopropylacrylamide) composite films and its application in the fabrication of logic gates

In the present work, reduced graphene oxide (rGO)/poly(N-isopropylacrylamide) (PNIPAA) composite films were electrodeposited onto the surface of Au electrodes in a fast and one-step manner from an aqueous mixture of a graphene oxide (GO) dispersion and N-isopropylacrylamide (NIPAA) monomer solutions. Reflection-absorption infrared (IR) and Raman spectroscopies were employed to characterize the successful construction of the rGO/PNIPAA composite films. The rGO/PNIPAA composite films exhibited reversible potential-, pH-, temperature-, and sulfate-sensitive cyclic voltammetric (CV) on-off behavior to the electroactive probe ferrocenedicarboxylic acid (Fc(COOH)2). For instance, after the composite films were treated at -0.7 V for 7 min, the CV responses of Fc(COOH)2 at the rGO/PNIPAA electrodes were quite large at pH 8.0, exhibiting the on state. However, after the films were treated at 0 V for 30 min, the CV peak currents became much smaller, demonstrating the off state. The mechanism of the multiple-stimuli switchable behaviors for the system was investigated not only by electrochemical methods but also by scanning electron microscopy and X-ray photoelectron spectroscopy. The potential-responsive behavior for this system was mainly attributed to the transformation between rGO and GO in the films at different potentials. The film system was further used to realize multiple-stimuli responsive bioelectrocatalysis of glucose catalyzed by the enzyme of glucose oxidase and mediated by the electroactive probe of Fc(COOH)2 in solution. On the basis of this, a four-input enabled OR (EnOR) logic gate network was established.

Fluorescent graphene oxide via polymer grafting: an efficient nanocarrier for both hydrophilic and hydrophobic drugs

Functionalized graphene-based drug delivery vehicles have conquered a significant position because functionalization improves its biocompatibility and stability in cell medium, leaving sufficient graphitic basal plane for drug loading through π-π stacking. In this study, poly(N-isopropylacrylamide) (PNIPAM) is covalently grafted from the surface of graphene oxide (GO) via a facile, eco-friendly and an easy procedure of free radical polymerization (FRP) using ammonium persulfate initiator. Various spectroscopic and microscopic studies confirm the successful grafting of PNIPAM from GO surface. PNIPAM-grafted GO (GPNM) exhibits enhanced thermal stability, improved dispersibility both in aqueous and cell medium, and better biocompatibility and cell viability compared to GO. Interestingly, GPNM displays an exciting fluorescence property in aqueous medium, which is a hike of intensity at 36 °C due to the lower critical solution temperature (LCST) of PNIPAM chains (32 °C). Moreover both hydrophilic (doxorubicin (DOX)) and hydrophobic (indomethacin (IMC)) drugs loaded on the surface of GPNM hybrid exhibits its efficacy as an efficient carrier for both types of drugs. Cellular uptakes of free DOX and DOX-loaded GPNM (GPNM-DOX) are evidenced both from optical and fluorescence imaging of live cells, and the efficiency of drug is significantly improved in the loaded system. The release of DOX from GPNM-DOX was achieved at pH 4, relevant to the environment of cancer cells. The pH-triggered release of hydrophobic drug was also studied using UV-vis spectroscopy via alginate encapsulation, showing a great enhancement at pH = 7.4. The IMC is also found to be released by human serum albumin using dialysis technique. The GPNM nanomaterial shows the property of simultaneous loading of DOX and IMC as well as pH-triggered simultaneous release of both of the drugs.

Toward the development of versatile functionalized carbon nanotubes

A versatile and effective strategy combination of mussel inspired chemistry and SET-LRP has been developed for preparation of hydrophilic and hydrophobic carbon nanotubes for the first time.

Fabrication of silica nanoparticle based polymer nanocomposites via a combination of mussel inspired chemistry and SET-LRP

A facile and efficient strategy combination of mussel inspired chemistry and SET-LRP has been developed for the surface modification of silica nanoparticles.

Aqueous SET-LRP catalyzed with “in situ” generated Cu(0) demonstrates surface mediated activation and bimolecular termination

Ultrafast, inversely temperature dependent aqueous SET-LRP with “in situ” generated Cu(0) yields quantitative chain-ends demonstrating surface mediated activation and termination.

Biomimic modification of graphene oxide

Synthetic polymer modified graphene oxide was prepared via combination of mussel inspired chemistry and Michael addition reaction in aqueous solution.

Surface-initiated ATRP of styrene from epoxy groups of graphene nanolayers: twofold polystyrene chains and various graft densities

Graphene oxide was functionalized with an initiator containing modifier and subsequently used in different amounts as the precursor for surface-initiated grafting from ATRP of styrene.

Towards development of a versatile and efficient strategy for fabrication of GO based polymer nanocomposites

Graphene oxide was facilely functionalized with synthetic polymers in aqueous solution using dopamine as the adhesion component.

Synthesis, micellization, and thermally-induced macroscopic micelle aggregation of poly(vinyl chloride)-g-poly(N-isopropylacrylamide) amphiphilic copolymer

PVC-g-PNIPAM amphiphilic copolymers with controlled graft lengths and densities are synthesized, which form unique macroscopic aggregates with well-defined 3D shapes in dilute aqueous solution above the LCST.

Bioinspired preparation of thermo-responsive graphene oxide nanocomposites in an aqueous solution

Thermo-responsive graphene oxide nanocomposites were fabricated by a facile, efficient and versatile methodviacombination of mussel inspired chemistry and RAFT polymerization.

Microwave-assisted surface-initiated redox polymerization of acrylamide with functionalized graphene oxide for aqueous lubricant additive

A fast, efficient and greener synthesized FGO-PAM nanocomposite as an improved aqueous lubricating additive.

Graphene-based materials functionalized with elastin-like polypeptides

Graphene-based materials commonly require functionalization for biological applications in order to control their physical/colloidal properties and to introduce additional capabilities, such as stimuli-responsiveness and affinity to specific biomolecules. Here, we functionalized CVD-grown graphene and graphene oxide with a genetically engineered elastin-like polypeptide fused to a graphene binding peptide and then showed that the resulting hybrid materials exhibit thermo- and photoresponsive behaviors. Furthermore, we demonstrate that our genetic engineering strategy allows for the facile introduction of bioactivity to reduced graphene oxide. The stimuli-responsiveness and genetic tunability of our graphene-protein nanocomposites are attractive for addressing future biomedical applications.

Self-activation and activation of Cu(0) wire for SET-LRP mediated by fluorinated alcohols

Herein we report the self-activation and activation of Cu(0) wire used to form a catalyst in single-electron transfer living radical polymerization (SET-LRP) in two fluorinated alcohols employed as solvents, 2,2,2-trifluoroethanol (TFE) and 2,2,3,3-tetrafluoropropanol (TFP).

Polystyrene-grafted graphene nanoplatelets with various graft densities by atom transfer radical polymerization from the edge carboxyl groups

An initiator containing modifier, 4-hydroxybutyl 2-bromopropionate (CBr), was synthesized by the reaction of 1,4-butanediol and alpha-bromoisobutyryl bromide. Subsequently, graphene oxide was functionalized with CBr to yield initiator-anchored graphene (GCBr). Then, GCBr was used as the precursor for ATRP of styrene.